DaelimPoly PP UH513M

A product of Ulsan PP Co., Ltd.

Dear ,
The following is in response to your request for Product Stewardship Information for the product listed above. The attached Product
Stewardship Bulletin (PSB) details the regulatory status of this product.

UlsanPP responds to product stewardship requests with a standardized Product Stewardship Bulletin which summarizes the global
regulatory status of a product. UlsanPP will not complete customers’ forms or questionnaires. Standardized responses provide each
customer with consistent information in a timely fashion.

Please note that compliance with these regulations should not be interpreted to guarantee that the product, will, in fact, perform in a
particular application.

Please also be advised that this document will be effective for one year from January 26th, 2024. However, information in this
document may be periodically updated. You are expected to regularly visit our website to obtain the most current information on this
product.

Should you have any further questions concerning UlsanPP product, or if we can assist in any other way, please do not hesitate to
contact us.

Best regards,

Koh, Jong Kyun

Manufacturing Director

Ulsan PP Co., Ltd.

Product Stewardship & Regulation Affairs: Tel: +82-52-901-6033 , e-mail: [email protected]

This certificate shall continue in effect for 1 year from its effective date

UlsanPP
Product Stewardship Bulletin Page 1 of 6
 Product
Stewardship
Bulletin

DaelimPoly PP UH513M
A product of Ulsan PP Co., Ltd.

PRODUCT MANUFACTURER

This product is manufactured by Ulsan PP Co., Ltd.

European Union
This product complies with the relevant requirements of Regulation 1935/2004/EC (Framework Regulation) as applicable
to intermediate materials (e.g. plastic powders, plastic granules or plastic flakes). This product complies with the relevant
requirements of Regulation 2023/2006/EC (GMP) and as amended, applicable to intermediate materials (e.g. plastic
powders, plastic granules or plastic flakes).

This product complies with the relevant requirements of Regulation 10/2011/EC (PIM) as amended, applicable to
intermediate materials (e.g. plastic powders, plastic granules or plastic flakes).

The monomers and additives used to produce this product are listed in the Union List of Authorized Substances of
Regulation 10/2011/EC and subsequent amendments.

Dual Use Additives

This product contains one Dual Use Additives as defined in Regulation 10/2011/EC.
▶ E570 Fatty Acid

Specific Migration Limit (SML)

There is a component in the Catalyst used which has a SML.

EU Regulation 10/2011/EC specifies 10 mg/dm2 as the maximum overall migration (OML) from the finished plastic food
contact material or article. The OML and SMLs (when applicable) should be determined according to the requirements
specified in EU Regulation 10/2011/EC. The OML and SML determinations are the responsibility of the manufacturer of
the finished plastic food contact material or article. In addition, we remind you that the manufacturers of the finished food
contact material or article must verify that the finished material or article, manufactured according to good manufacturing
practices, does not modify the organoleptic properties of the food.

United States
The base resin in this product meets the FDA (Food and Drug Administration) requirements contained in the Code of Federal
Regulations in 21 CFR 177.1520 (a) (1) (i) and (c) (1.1a). According to information received from all of our suppliers, all other
ingredients used in this product meet the requirements of their respective FDA regulations and 21 CFR 177.1520 (b).
This product meets the FDA criteria in 21 CFR 177.1520 for food contact applications listed under conditions of use A
through H in 21 CFR 176.170 (c), Table 2. This product can be used in contact with all food types as listed in 21 CFR 176.170
(c), Table 1.

China
GB4806.1-2016 - Food Contact Material & Articles General Safety Requirement
This product complies with relevant requirements of GB4806.1-2016 - Food Contact Material & Articles General Safety
Requirement, as applicable to Plastic Resins.
UlsanPP
Product Stewardship Bulletin Page 2 of 6
 GB4806.6-2016 “National Food Safety Standard : Food Contact Resins"
The base resin in this product complies with the specifications established in GB4806.6-2016 “National Food Safety
Standard : Food Contact Resins ”Appendix A.1, Serial Number 74, resin type : PP” .
No Monomer used in this base resin has SML.

GB9685-2016 “National Food Safety Standard : Additives for use in Food Contact Materials and Articles"
The additives used in this product comply with the requirement of “GB9685-2016 National Food Safety Standard :
Additives for use in Food Contact Materials and Articles” and relevant approval announcements.

Additives with Max Residual (QM), Specific Migration Limit (SML) and/or Total Specific Migration Limit (SML (t)) are not
intentionally used in this product.

General Remarks :
GB4806.1 "Food Contact Materials & Articles -General Safety Requirement" Clause 8.4, requires only the manufacturer
of the finished plastic food contact article to declare compliance with OML specification.
Final plastic food contact articles may have additional compliance requirements, and are the responsibility of the
manufacturer of the finished plastic food article.

Phthalates
Phthalates are not used in the manufacture of or the formulation of this product. However, this product has not been
tested for phthalates.

Chemical Inventories

All ingredients in this product are in compliance with the following chemical inventories:

United States Toxic Substances Control Act Inventory (TSCA)

Canada Domestic Substances List (DSL)
Europe European Inventory of Existing Commercial Chemical Substances (EINECS)
Australia Australian Inventory of Chemical Substances (AICS)
New Zealand New Zealand Inventory of Chemicals (NZIoC)
China Inventory of Existing Chemical Substances (IECSC)
Taiwan Taiwan Chemical Substance Inventory (TCSI)
Korea Korean Existing Chemicals List (ECL)
Japan Japanese Existing and New Chemical Substances (ENCS)
Philippines Philippines Inventory of Existing Chemicals & Chemical Substances (PICCS)

This product has no special requirements under US TSCA (e.g. consent orders, test rules, 12 (b) requirements).

U.S. Pharmacopeia (USP)

This product has not been tested for U.S. Pharmacopeia.

European Pharmacopeia (EP)

This product cannot be certified for European Pharmacopoeia.

Global Toy Regulations

CEN EN Standards refer to safety of toys and not specifically to plastic raw materials. According to the information
provided by our raw material suppliers, we deem this product should comply with the requirements of CEN standards
EN71-3/EN71-9 (as amended) as applicable to plastic raw materials (pellets, powder, flakes). However, this product has
not been tested according to these CEN Standards.

We have reviewed Standard Consumer Safety Specification of Toy Safety: ASTM F-963-2017. It appears that Section 4.3.5
UlsanPP
Product Stewardship Bulletin Page 3 of 6
 applies to paints or similar coatings, and accessible parts of toys, and section 8.3 describes corresponding testing protocol.
Metal elements mentioned in Section 4.3.5 are not intentionally used in the production or formulation of this product.

Ozone Depleting Substances

Ozone Depleting Substances are not used in the manufacture of or the formulation of this product. However, we do not
test for presence of these substances in our product.

Restriction of Hazardous Substances in Electric and Electronic Equipment (RoHS)

RoHS Regulation refers to electrical and electronic equipment and not specifically to plastic raw materials. However,
based on the available documentation from raw materials suppliers, this product complies with the requirements of the
Directives 2002/95/EC and 2011/65/EU, as amended, concerning the limits of cadmium, lead, mercury, hexavalent
chromium, polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE), bis (2-ethylhexyl) phthalate
(DEHP), butyl benzyl phthalate (BBP), dibutyl phthalate (DBP) and diisobutyl phthalate (DIBP) .

Latex

Natural rubber latex, synthetic latex or natural rubber are not used in the manufacture of or the formulation of this product.
However, we do not test for presence of these substances in our product.

Asbestos

We do not use Asbestos in the production and formulation of this product. However, we do not test our grade for presence
of this substance.

Heavy Metals (Directive 94/62 EEC)

CADMIUM, CHROMIUM (VI), MERCURY, LEAD are not intentionally added to this product and the incidental sum of
the concentration in this product does not exceed 100 parts per million by weight. This product can be recycled according
to Directive 94/62 requirements.

PCB (Polychlorinated biphenyls) / PCT (Polychlorinated terphenyls)

PCB, PCT are not used in the manufacture of or the formulation of this product. However, we do not test for presence
of these substances in our product.

Polyaromatic Hydrocarbons (PAHs)

Polyaromatic Hydrocarbons are not used in the manufacture of or the formulation of this product. However, we do not
test for presence of these substances in our product.

Bisphenol A

Bisphenol A is not used in the manufacture of or the formulation of this product. However, we do not test for presence
of this substance in our product.

Melamine

Melamine is not used in the manufacture of or the formulation of this product. However, we do not test for presence of
this substance in our product.

Benzotriazoles

Benzotriazoles are not used in the manufacture of or the formulation of this product. However, we do not t est for presence
of these substances in our product.

UlsanPP
Product Stewardship Bulletin Page 4 of 6
 Perfluoro Octanoic Sulfonate (PFOS), Perfluoro Octanoic Acid (PFOA)

Perfluro Octanoic Sulfonate (PFOS) and Perfluoro Octanoic Acid (PFOA) are not used in the manufacture of or the
formulation of this product. However, we do not test for presence of these substances in our product.

Switzerland VOC-Lenkungsabgabe

This product contains less than 3% VOC's of the substances in the positive lists of the Switzerland Regulations "VOC -
LENKUNGSABGABE.

California Proposition 65

This material does not contain listed substances known to the State of California to cause cancer, birth defects, or other
reproductive harm that would require a warning under the statute.

Conflict Minerals (Dodd-Frank Wall Street Reform and Consumer Protection Act)

Tantalite, Tin, Tungsten and Gold are not intentionally used in the formulation of this product. However, we do not test
for presence of these substances in our product.

EU REACH – SVHC

This product does not contain any of the Annex XIV candidate chemicals proposed to be Substances of Very High Concern
(List as of January 23rd, 2024) above the 0.1% threshold as stated in REACH (Article 57, Regulation No. 1907/2006)
determined either through (i) non-use of the substance, (ii) mass balance calculation, or (iii) specific testing. The current list
of all SVHCs can be found at the following link to the ECHA website: http://echa.europa.eu/web/guest/candidate-list-table.

Animal derived raw-materials(BSE/TSE)

Animal derived raw-materials are not intentionally used in the manufacture or formulation of this product according to the
information from raw material suppliers. However, we do not test for the presence of these substances in our product.

Perfluoroalkylated and Polyfluoroalkylated Substances (PFASs)

Perfluoroalkylated and Polyfluoroalkylated Substances (PFASs) are not used in the manufacture of or the formulation of
this product. However, we do not test for the presence of these substances in our product.

UlsanPP
Product Stewardship Bulletin Page 5 of 6
 Disclaimer

The information in this document is, to our knowledge, true and accurate at the time and date of issue. However, information
in this document may be updated periodically due to changes in the laws and regulations, or for other reasons, therefore
we cannot guarantee that the status of this product will remain unchanged. Users are expected to regularly visit UlsanPP’s
Website (http://www.ulsanpp.com) to obtain the most current information on this product. This document is generated for
the purpose of distributing health, safety, and environmental data.

1) Before using a UlsanPP product, users shall review carefully Seller's instructions for the use of such product and make
their own independent determination of whether the product is suitable for the intended use and can be used safely and legally.
If users fail to comply with Seller's restrictions and instructions for the use of the product or an obligation to notify Seller, if
applicable, of each specific application before using such product in certain categories of application, users are solely liable
for any injuries or damages resulting from their use of such product and Seller shall have no liability whatsoever.

2) ULSANPP MAKES NO WARRANTY, EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE) UNLESS AGREED OTHERWISE IN A CONTRACT.

3) The use of this product(s) is strictly prohibited in

i. U.S. FDA Class III, Health Canada Class IV, and/or European Union Class III Medical Devices;
ii. applications involving permanent implantation into the body;
iii. life-sustaining medical applications; or
iv. lead, asbestos or MTBE related applications.

Users are solely liable for any injuries or damages resulting from any use of this product(s) in the above categories and
Seller shall have no liability whatsoever.

4) The use of this product is further prohibited in the following categories unless Seller receives a prior notice of each
specific application using such product, provided that Seller may refuse to sell such product at its sole discretion.

i. U.S. FDA Class I, Health Canada Class I, and/or European Union Class I medical devices;
ii. U.S. FDA Class II, Health Canada Class II or Class III, and/or European Union Class II Medical Devices;
iii. film, overwrap and/or product packaging that is considered a part or component of one of the aforementioned Medical
Devices;
iv. packaging in direct contact with an active pharmaceutical ingredient and/or dosage form that is intended for inhalation,
injection, intravenous, nasal, ophthalmic (eye), digestive, or topical (skin) administration;
v. tobacco related products and applications;
vi. electronic cigarettes and similar devices; or pressure pipe or fittings that are considered a part or component of a
nuclear reactor

All references to U.S. FDA, Health Canada, and European Union regulations include another country’s equivalent
regulatory classification.

5) For the purpose of this Disclaimer, “Seller” shall mean UlsanPP and any person or entity appointed by UlsanPP for the
sale of the product covered by this Disclaimer.

6) Users should review the applicable Material Safety Data Sheet before handling the product.

Trademarks

The Trademark referenced within the product name is owned and used by DL Chemical Co., Ltd. and it is used by Ulsan
PP Co., Ltd.

UlsanPP
Product Stewardship Bulletin Page 6 of 6