Scribd
Upload
66 views5 pages

KT913

This document provides instructions for using a multi-frequency copy remote control device. It can copy codes from original remote controls by pressing corresponding buttons simultaneously. The device works from 300MHz to 915MHz and can copy codes for common remote control ICs as well as rolling and encrypted codes. Resetting instructions are also included.

Uploaded by

solervi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
66 views5 pages

KT913

This document provides instructions for using a multi-frequency copy remote control device. It can copy codes from original remote controls by pressing corresponding buttons simultaneously. The device works from 300MHz to 915MHz and can copy codes for common remote control ICs as well as rolling and encrypted codes. Resetting instructions are also included.

Uploaded by

solervi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

QIACHIP

User Manual

Multi-frequency copy remote control

1 / 5
QIACHIP
I. Overview
Multi-frequency copy remote controller is a multi-frequency copy
device from 300MHZ-915MHZ, with the features of wide copy compatibility,
accurate copy frequency and accurate copy data.
The product is compatible with most of the fixed code remote
controllers in the market. The product is compatible with most of the fixed
code remote controllers in the market, and also can copy most of the
rolling code and encrypted remote controllers in the market.

Features
1. Don't need to consider the original remote control frequency
2. Supports rolling code and encrypted copies (see copy list)
3. Long remote control distance
4. A four-button remote control can be converted into two four-button
remote controls, without affecting each other

The common coding IC of the original remote control that can be copied are
PT2262\PT2264\SC2262\SC2260\HS2262\2260\LX2262\2260\EV1527\
PT2240\SMC5326\HT6P20B\6P20D\HCS101\Part of HCS200\HCS301 and other
rolling codes and some domestic non-standard encrypted remote control.

Copyable frequencies are.


315 MHZ, 433.92 MHZ, 306 MHZ, 310 MHZ, 318 MHZ, 330 MHZ, 350 MHZ
370MHZ, 390MHZ 418MHZ, 430.5MHZ, 431.5MHZ, 432.8MHZ, 580MHZ
868.35MHZ, 915MHZ

2 / 5
QIACHIP
II. Use
Step 1, Reset
Before copying, you need to reset the copy remote control to operate as follows.
Press the two buttons on the top row of the remote control at the same time without
releasing, wait for 2 seconds and see the remote control indicator light flashing rapidly
and constantly, that means the code is cleared successfully.

Note 1: The light should keep flashing before you can release your hand.
Note 2: If there is no non-stop flashing even after pressing for a long time,
it means the two buttons are not pressed at the same time.

Repeat the operation once. After clearing the code, press any key on the remote control,
and the light will flash off to indicate the success of clearing the code.

3 / 5
QIACHIP
Step 2: Copy.
Press the 2 remote controls together, press the corresponding keys at the
same time, see the light flash off and then light up to indicate successful
copying, then copy the remaining keys in the same way in turn.

Note: The LED will blink slightly when copying the scrolling code, do not
release your hand until the indicator lights up.

Recovery
If you accidentally erase the data of the copy remote control and you
want to restore it.
Please press the following two buttons at the same time without
releasing, wait for 2 seconds until the LED does not stop flashing and then
release, recover successfully by pressing the remote control button, the
indicator light is always
on.

4 / 5
QIACHIP

III. Technical parameters


1. Working frequency: 300MHZ-915MHZ
2. Working current: 20MA (12V)/12MA (3V)
3.Working voltage: 12V or 3V
4.modulation mode: AM ASK
5.remote control distance: ≥ 50M
6.copy mode: close to copy together

5 / 5

You might also like