ETM Unit4 MCQ's

ETM Unit No. 4 Prepared By: Mr. S. L.
Deshmukh
1) BEE stands for __________
A) Bureau of Energy Effectiveness

B) Board of Environmental Efficiency
C) Bureau of Energy Efficiency
D) Board of Energy Efficiency
Ans: C) Bureau of Energy Efficiency
2) _________ are used for describing the energy performance of manufactured products.
A)Standards
B)Labels
C)Standards & Labels
D)None of these
Ans:B)Labels
3)Appliance 1 = 3 Star Rating and Appliance 2 = 5 Star Rating. _______ will save maximum
energy.
A)Appliance 1
B) Appliance 2
C)Both
D)None of these
Ans:B) Appliance 2
4)_______ is included in BEE’s Star Labelling Program.

A)LPG stove
B)Computer
C)Microwave Oven
D)Frost-free Refrigerator
Ans: D) Frost-free Refrigerator
5)Air Conditioner having 5 Star Rating in 2015 will have _____ Star Rating in 2016.
A) 1
B) 2
C) 3
D) 4
Ans: 4
6)If the EER in BTU/hr/W for an A/C is 3.30, its C.O.P in W/W is _______
A)1
B)6.20
C)11.2629
D)7.7587
Ans:C)11.2629
7)Energy Monitoring & Targeting helps in reducing annual energy costs in various industrial
sectors by _____
A)1 % to 2 %
B)2 % to 10 %
C)4 % to 15 %
D)5 % to 20 %
Ans:D)5 % to 20 %
8)_______ aims at identification of energy consumption level which is desirable for energy
conservation.
A)Energy Monitoring
B)Energy Targeting
C)Recording
D)Controlling
Ans:B)Energy Targeting
9)______ is the best method for representing individual consumption of a number of fuels in
percentage.
A)Pie Chart
B)Bar Chart
C)CUSUM Technique
D)None of these
Ans:A)Pie Chart
10)SEC stands for _______

A)Sustainable Energy Council
B)Specific Energy Consumption
C)Sustainable Energy Consumption
D)Specific Energy Council
Ans:B)Specific Energy Consumption
11)Co-relating energy consumption to a measured output like production quantity is the function
of _______
A)Recording
B)Analysing
C)Comparing
D)Monitoring
Ans:B)Analysing
12)2 kg of Furnace oil will generate ______ kcal

A)1000
B)10,200
C)2000
D)20,400
Ans:D)20,400
13)Energy consumed for a period = C + (M * production for the same period). M stands for
_________
A)Fixed Energy Consumption
B)Variable Energy Consumption
C)Both, fixed and variable energy consumption
D)No energy consumption
Ans:B)Variable Energy Consumption
14)In a CUSUM technique chart, if energy consumption is less than the baseline, it shows that
the _______
A)Performance is good
B)Performance is bad
C)Performance is very poor
D)Performance is zero
Ans:A)Performance is good
15)CUSUM technique: Total savings = 65, percentage savings = 3.7 %. Actual energy
consumption will be _______
A)240.5
B)17.567
C)1756.75
D)2405
Ans:C)1756.75
16)CUSUM technique is _______ technique
A)Analytical
B)Graphical
C)Exponential
D)None of these
Ans:B)Graphical
17)In the graph of Energy vs Production, a high degree of scatter with respect to the trend-line
indicates that _______
A)There is a scope for energy savings
B)There is no scope for energy savings
C)Energy savings are highest
D)The graph is plotted wrongly
Ans:A)There is a scope for energy savings
18)Equation of trend line is Ecalc = 0.2 P + 150, Eact= 400, Ecalc= 248, P = _______
A)300
B) 380
C) 490
D) 520
Ans:C) 490
19)In an industry, _______ has the best potential for cost savings.
A)Energy
B)Labour
C)Materials
D)All of these
Ans:A)Energy
20)The inspection, survey and analysis of energy flows for energy conservation in a building is
called as _______
A)Energy Management
B)Energy Efficiency
C)Energy Audit
D)Energy Output
Ans:C)Energy Audit
21)If specific results for energy efficiency improvement are required, ______ energy audit will
be the best choice.
A)Preliminary
B)Detailed
C)Targeted
D)All of these
Ans:B)Detailed
22)Detailed Energy Audit generally requires _______

A)1 to 10 weeks
B)1 to 3 days
C)1 to 3 weeks
D)1 to 10 days
Ans:A)1 to 10 weeks
23)If readily available data is used, the energy audit performed is _______
A)PEA
B)DEA
C)TEA
D)All of these
Ans:A)PEA
24)A company has 10 machines. During energy audit, only 3 machines are considered. It is
______ energy audit.
A)Preliminary
B)Detailed
C)Targeted
D)All of these
Ans:C)Targeted
25)Conserving and optimizing energy use for getting more production output and saving money
is called as _______
A)Energy Conservation
B)Energy Efficiency
C)Energy Audit
D)Energy Management
Ans:D)Energy Management
26)Energy can be conserved in HVAC systems by _______

A)Using air-cooled condensers
B)Maximizing fan speeds
C)Using water-cooled condensers
D)Maximizing heat losses
Ans:C)Using water-cooled condensers
27)Use of a highly efficient machine is _______

A)Using energy more efficiently
B)Using energy less efficiently
C)Reducing amount of energy used
D)Increasing amount of energy used
Ans:A)Using energy more efficiently
28)To reduce pollution, soft coke should be replaced by _________

A)Petrol
B)Kerosene & LPG
C)Diesel
D)LDO
Ans:B)Kerosene & LPG
29)Plant Energy Performance (PEP) compares _______

A)Energy performance of current and reference year
B)Energy Audit of current and reference year
C)Production of current and reference year
D)Production of current and future years
Ans:A)Energy performance of current and reference year
30)If the temperature inside a furnace is to be measured, ______ will be the most suitable
instrument.
A)Contact type thermometer
B)Laser tachometer
C)Combustion Analyzer
D)Infrared Thermometer
Ans:D)Infrared Thermometer
31) One of the following is not the element of energy monitoring and targeting system _______
A) Recording the energy consumption
B) Comparing the energy consumption
C) Controlling the energy consumption
D) Reducing the production
Ans: D
32) The empirical relationship used to plot production Vs Energy consumption is (Y = energy
consumed for the period; C = fixed energy consumption; M = energy consumption directly
related to production; X = production for the same period).
A) X = Y + MC
B) Y = MX + C
C) M = CX + Y
D) None of the above
Ans: B
33) 1 Kg LPG = ______Kcal

A) 12,000
B) 8000
C) 6000
D) 4000
Ans: A
34) A CUSUM graph follows a random fluctuation trend and oscillates around.
A) 100
B) 100 %
C) 0
D) None of the above
Ans: C
35) To draw a CUSUM chart following data is required _____

A) Monthly energy consumption and monthly production
B) Monthly specific energy consumption and turn over
C) Monthly profits and production
D) None of these
Ans: A
36) For any company energy consumption is mostly relates to _____
A) Profits
B) Inventory
C) Production
D) All of these
Ans: C
37) Bureau of Energy Efficiency (BEE) establish in the year of _____

A) 2010
B) 2000
C) 2002
D) 2001
Ans: C
38) ______ is the key to a systematic approach for decision-making in the area of energy
management.
A) Audit phase
B) Energy audit
C) Pre-audit phase
D) Conduct survey and monitoring
Ans: C
39) “The judicious and effective use of energy to maximise profits and enhance competitive
positions”. This can be a definition of ______
A) Energy conservation
B) Energy management
C) Energy policy
D) Energy Audit
Ans: B
40) The objective of energy management includes ____

A) Minimising energy costs
B) Minimising waste
C) Minimising environmental degradation
D) All of these
Ans: D
41) An energy policy does not include _______
A) Target energy consumption reduction
B) Time period for reduction
C) Declaration of top management commitment
D) Future production projection
Ans: D
42) The various types of the instruments, which requires during audit need to be _______
A) easy to carry
B) easy to operate
C) inexpensive
D) all of these
Ans: D

ETM Unit4 MCQ's

Uploaded by

Copyright:

Available Formats

ETM Unit4 MCQ's

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

ETM Unit4 MCQ's

Uploaded by

Copyright:

Available Formats

ETM Unit No. 4 Prepared By: Mr. S. L.

A) Bureau of Energy Effectiveness

Ans: C) Bureau of Energy Efficiency

4)_______ is included in BEE’s Star Labelling Program.

10)SEC stands for _______

12)2 kg of Furnace oil will generate ______ kcal

22)Detailed Energy Audit generally requires _______

26)Energy can be conserved in HVAC systems by _______

27)Use of a highly efficient machine is _______

28)To reduce pollution, soft coke should be replaced by _________

29)Plant Energy Performance (PEP) compares _______

33) 1 Kg LPG = ______Kcal

35) To draw a CUSUM chart following data is required _____

37) Bureau of Energy Efficiency (BEE) establish in the year of _____

40) The objective of energy management includes ____

You might also like