Hitachi Proprietary DKC810I

Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.

WEB00-00

WEB CONSOLE SECTION

WEB00-00
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB00-10

Contents

WEB01-10 1. Before using Web Console

WEB01-30 1.1 Setting IP Address and Network
WEB01-100 1.2 Check of Configuring Web Console over a Firewall

WEB02-10 2. Web Console

WEB02-10 2.1 Specifications of Web Server Status
WEB02-50 2.2 Procedure for Activation Using SVP
WEB02-80 2.3 Specifications Common to Functions of Web Console
WEB02-90 2.4 Before Using Web Console (You are requested to read this without fail)
WEB02-90 2.4.1 How to use maintenance PC’s directory
WEB02-110 2.4.2 Auto Account Lock
WEB02-120 2.5 Actions to Be Taken According to Result of Trouble shooting

WEB03-10 3. Difference from the P.P. Manual

WEB03-10 3.1 Local Replication
WEB03-10 3.1.1 Initialize Local Replica Pairs
WEB03-20 3.1.2 Split Pairs window
WEB03-30 3.1.3 Resync Pairs window
WEB03-40 3.2 Data Retention Utility
WEB03-50 3.3 Universal Volume Manager
WEB03-50 3.3.1 Mapping its own volumes
WEB03-60 3.3.2 Previous arrangement for mapping its own volumes
WEB03-60 3.3.3 Note for mapping its own volumes
WEB03-70 3.4 Remote Replication
WEB03-70 3.4.1 Remote Replica Function Switch
WEB03-80 3.4.1.1 Edit Remote Replica Function Switch
WEB03-90 3.4.1.2 Remote Copy Function Switch
WEB03-100 3.4.2 Complete SIMs
WEB03-100 3.4.2.1 Complete SIMs (TC)
WEB03-110 3.4.2.2 Complete SIMs (UR)
WEB03-120 3.4.3 Assign Remote Command Devices window
WEB03-130 3.5 Release Mainframe Command Devices
WEB03-140 3.6 Dynamic Provisioning/Dynamic Tiering/Dynamic Provisioning for
Mainframe/Dynamic Tiering for Mainframe
WEB03-160 3.7 Change SCP Time

WEB04-10 4. IPv6 Setting

WEB00-10
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB00-20

WEB05-10 5. Procedure of server software uninstallation/installation

WEB05-10 5.1 Apache
WEB05-10 5.1.1 Uninstallation of Apache
WEB05-30 5.1.2 Installation of Apache
WEB05-60 5.2 Tomcat
WEB05-60 5.2.1 Uninstallation of Tomcat
WEB05-100 5.2.2 Installation of Tomcat
WEB05-150 5.3 Flash Player
WEB05-150 5.3.1 Uninstallation of Flash Player
WEB05-180 5.3.2 Installation of Flash Player

WEB06-10 6. Before using the Alert setting/FTP transfer function

WEB00-20
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB01-10

1. Before using Web Console

Settings of JAVA and an IP address are required to use Web Console on SVP.
Refer to “Hitachi Device Manager - Storage Navigator User Guide” for the specification of the
commonness part of Web Console for the operation and conventions.

This screen will not be displayed from the next startup when you check the check box of “Always
trust content from this publisher.” and select (CL) [Yes].

WEB01-10
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB01-20

NOTE: They are notes for a remote desktop connection to SVP.

There are cases that users copy a file from SVP to the maintenance PC via Remote
Desktop in Web Console.

This screen will not be displayed from the next startup when you check the check box of “Do not
ask again until the next update is available.” and select (CL) [Later].
If you select [Update(recommended)] or [Block], please restart Web Console.

WEB01-20
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB01-30

1.1 Setting IP Address and Network

When using Web Console from a remote personal computer or using the SNMP Agent function, a
connection to an external LAN and a setting of a network is required (See LOC04-40).
Please setup according to the worksheet which the user’s administrator indicated at the time of a
new Installation.
Please setup the contents which took the duplicate from a setup on SVP before REPLACE.

NOTE: Don’t change connection name. If you do so, Web Console will not work.

(1) Setting IP address

(a) Opening the Control Panel window
Select (CL) [Control Panel] from the [Start] menu.

(b) Opening the Network and Sharing Center window

Double-click [Network and Sharing Center] in the ‘All Control Panel Items’ window.

WEB01-30
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB01-40

(c) Opening the Network Connections window

Select (CL) [Change adapter settings] in the left side of ‘Network and Sharing Center’
window.

(d) Opening the Public LAN Properties window

Select (CL) [Public LAN] in the ‘Network Connections’ window and select (CL)
[Properties] by clicking the right mouse button.

WEB01-40
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB01-50

(e) Opening the Internet Protocol Version 4 (TCP/IPv4) Properties window

Select (CL) [Internet Protocol Version 4 (TCP/IPv4)] in the ‘Local Area Connection
Properties’ window and select (CL) the [Properties] button.

(f) Setting the external IP address

Set the “IP address”, “Subnet mask”, “Default gateway”, “Preferred DNS server” and
“Alternate DNS server” and select (CL) the [OK] button.
When you do not set IPv6, go to Step (i).

WEB01-50
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB01-60

(g) Opening the Internet Protocol Version 6 (TCP/IPv6) Properties window

Select (CL) [Internet Protocol Version 6 (TCP/IPv6)] in the ‘Local Area Connection
Properties’ window and select (CL) the [Properties] button.

(h) Setting the external IP address

Set the “IPv6 address”, “Subnet prefix length”, “Default gateway”, “Preferred DNS
server”, “Alternate DNS server” and select (CL) the [OK] button.

(i) Closing the window

After the setting is completed, select (CL) the [OK] button in the “Local Area Connection
Properties” window.

WEB01-60
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB01-70

(2) Setting Network Connection Properties

Checking whether the setting of the network (setting of Config) must be changed or not. Ask
the customer about the setting of the switch (HUB) connected to the SVP. When the case is not
the above, terminate the operation by selecting (CL) the [OK] button.

There is a case where the setting must be changed depending on the customer’s environment.
The case where the change is required is as follows.

(Normally, no setting change is required.)

• When the switch (HUB), setting of which is fixed as ‘100M Full Duplex’, is connected to the
PC of the SVP

NOTE: The setting of the SVP made is “Auto Negotiation”.

(a) Opening the Public LAN Properties window

Select (CL) [Public LAN] in the ‘Network Connections’ window and select (CL)
[Properties] by clicking the right mouse button.

WEB01-70
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB01-80

(b) Opening the configuration windows

Select (CL) the [Configure...] button in the window.

(c) Switching the tab

After the [Configure...] button is pressed, the following window is displayed.
Select (CL) the ‘Advanced’ tab in the following window.

WEB01-80
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB01-90

(d) Setting the Connection Properties

After the ‘Link Speed’ tab is selected, the following window is displayed.
Change the value of ‘Speed and Duplex’ from ‘Auto Detect’ to ‘100Mbps Full Duplex’.

(e) Applying the settings and closing the window

Return the window to ‘Local Area Connection Properties’ by pressing (CL) the [OK]
button and close the window by pressing the [OK] button.

NOTE: When you use Web Console only with the IPv6 connection, set it referring to WEB04-
10.

WEB01-90
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB01-100

1.2 Check of Configuring Web Console over a Firewall

When you connect Web Console and the SVP over a firewall, make sure to connect them through
the following TCP/IP port numbers to configure the firewall:
• FTP (File Transfer Protocol): 21 (TCP)
• HTTP (Hypertext Transfer Protocol): 80 (TCP)
• SNMP (Simple Network Management Protocol): 161 (UDP)
• HTTPs (Hypertext Transfer Protocol over Secure Socket Layer): 443 (TCP)
• RMI (Remote Method Invocation): 1099 (TCP)
• RMI: 51099 (TCP)
• RMI: 51100 (TCP)
NOTE: If the operating system of your Web Console computer is Windows Vista, you must
configure a firewall so that Web Console and the SVP can communicate through these
ports because a firewall is enabled by default.

WEB01-100
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB02-10

2. Web Console
2.1 Specifications of Web Server Status
Activate RISMAN, which is a program for accepting requests of a client and for performing high-
speed processing through having structures of the RMI server and RAID in the memory, in order to
make Web Console operate.
The window was always displayed as DKC460I. It does not usually displays as
DKC510I/DKC610I/DKC710I/DKC810I. When the Web Server Status button of SVP launcher is
pressed, the window as shown below displays.

Web Console cannot operate until all the statuses above become Ready(OK).
• Start Time: Time when RISMAN was activated.
• Status: Processing is displayed when RISMAN has the right of maintenance or Ready when it has
not. (The mode can be changed to Modify even in the Processing status, however, a maintenance
work cannot be done.)
• This window is started by pressing the “Web Server Status” button on the ‘SVP’ window.

WEB02-10
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB02-20

• Function Name
Name Description Part code
1 DKC Displays whether the DKC is ready or not. 0002
2 Base Displays the status of the management of configuration 0002/0003
information.
3 HIC(DKC) Displays the state of initialization of the common function. 8005
4 HIC(Monitor) Displays the state of initialization of the Performance Monitor 5105
function.
5 HIC Displays the state of initialization of the Volume Migration 5205
(Volume Migration) function.
6 HIC(PPC) Displays the state of initialization of the Server Priority Manager 5305
function.
7 HIC(SNMP IP) Displays the state of initialization of the SNMP Information 0305
function.
8 HIC(TrueCopy) Displays the state of initialization of the Remote Copy function. 6005/6105
9 HIC(ShadowImage) Displays the state of initialization of the ShadowImage function. 7005/7105
10 HIC(Key Licence) Displays the state of initialization of the Key License function. 0405
11 HIC(PAV) Displays the state of initialization of the PAV function. 9005
12 HIC Displays the state of initialization of the Volume Security 9105
(Volume Security) function.
13 HIC(Volume Displays the state of initialization of the Volume Retention 9205/9605
Retention Manager) Manager z/OS / Data Retention Utility function.
14 HIC(EXD) Displays the state of initialization of Universal Volume Manager 0605
function.
15 HIC(PRM) Displays the state of initialization of Virtual Partition Manager 8505
function.
16 HIC(UR) Displays the state of initialization of the Universal Replicator 6505/6605
function.
17 HIC(VOL) Displays the state of initialization of the Quick Shadow / Dynamic 3005
Provisioning function.
18 HIC(XRC) Displays the state of initialization of the XRC function. 6805
19 HIC(DCR) Displays the state of initialization of the Cache Residency 4005
Manager function.
20 HIC(LUNM) Displays the state of initialization of the LUN Manager function. 1005
21 HIC(CVS) Displays the state of initialization of the Volume Manager 3305
function.
22 HIC(MAL) Displays the state of initialization of the E-Mail information 8605
function.
23 HIC(MNT) Displays the state of initialization of the Maintenance function. 8705
24 HIC(RPT) Displays the state of initialization of the Report function. 8805
25 HIC(RSG) Displays the state of initialization of the Resource Group function. 20705
26 HIC(SIM) Displays the state of initialization of the SIM Syslog information 8905
function.

WEB02-20
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB02-30

• Status
Display Color Meaning
1 Not Initialize Gray Initialization is not started yet.
2 Initialize(Stat) Yellow Initialization is in progress.
3 Initialize(Retry) Yellow Initialization failed and it is being retried.
4 Ready(OK) Blue Ready for operation
5 Refresh(Start) Green Refreshment is in progress. The internal buffer is being initialized
after a writing from the SVP / SNMP / Web Console has been
completed.
6 Refresh(Retry) Green Refreshment failed and is being retried.
7 Initial(Error) Red Initialization failed. (It is retried every other minute) (*1) (*3)
8 Refresh(Error) Red Refreshment failed. (It is retried every other minute) (*1)
9 Initialize(Pause) Yellow Initialization temporarily stops. (*2)
10 Refresh(Pause) Yellow Refreshment temporarily stops. (*2)

NOTE:
• Any of the statuses is Initialize(Stat) / Refresh(Start) / Initialize(Retry) / Refresh(Retry), no
maintenance work can be done from an SVP. The message “INS2268E” is displayed on the
SVP.
However, it changes to the state of Initialize(Pause) / Refresh(Pause) in about 10 seconds and
the maintenance work on the SVP may be possible.
• When an initialization or refreshment operation fails, a retrial operation is performed. When
you want to do a maintenance work, do it when the Status is Ready. (Otherwise, an SVP
rebooting, which is done after executing Define Information Files or All Configuration Files
for alteration of the Config, may fail.)
• While an SVP maintenance work is being done, an initialization or refreshment operation
fails and the status becomes Retry. When the maintenance work is completed, close the SVP
window immediately.
• Operation of Web Console for a part whose status is not Ready(OK) cannot be done.
• There is a possibility the configuration is being changed from a user application (RAID
Manager etc.) other than Storage Navigator if the display of Initialize(Start) / Refresh(Start)
remains as is for a while. It will turn into the state of Ready(OK) a while after the
configuration change is completed performed from the user application.

WEB02-30
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB02-40

*1: When xxxx(Error) status is displayed for more than 2 minutes without, there may be a
problem just on display.
If you can reboot by pressing Web Console button and can press the each function button
normally, there is no problem.
When DKC has been powered off, it is likely to turn into the state of xxxx(Error).
After DKC has been powered on for a while, it turns into the state of Ready(OK).
*2 Initialization/Refresh is restarted by changing the SVP to the View mode.
*3 When a storage system is ended without shutting down SVP ,“Initialize(Error)” may be
displayed at the time of initialization of RISMAN, a retry recovers.

• Error Code
When an error occurs, its error cord is displayed.
Refer to errors which occur in each part shown in the list of Web Console messages.
(Part codes are listed in the item of Function Name.)

WEB02-40
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB02-50

2.2 Procedure for Activation Using SVP

When SVP is logged in Remote Desktop, Web Console automatically starts up. Select
[Maintenance]-[Maintenance Components] from the Action menu to start the maintenance screen.

WEB02-50
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB02-60

NOTE1: When Web Console is not ready, the screen below is displayed. Selecting (CL) [Start
SVP] will start the maintenance screen.

NOTE2: Just after the microcode updates, the maintenance screen starts without the main
window of Web Console. If the maintenance screen is closed, the main window of
Web Console starts automatically (If Web Console is not ready, the above screen
appears until it is ready). If you select (CL) the [Start SVP] button, the maintenance
screen starts. When you close the maintenance screen, the main window of Web
Console starts automatically. If you want to close the maintenance screen, change
[View Mode] to [Modify Mode] and then select (CL) [Execute]-[Exit].

WEB02-60
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB02-70

If the security warning as shown in the following figure is displayed, select (CL) [Run].

NOTE: Do not activate Web Console from the SVP by specifying the URL on Internet
Explorer.

If the screen below is displayed, select (CL) [Allow].

WEB02-70
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB02-80

2.3 Specifications Common to Functions of Web Console

Refer to “Hitachi Device Manager - Storage Navigator User Guide” for the specification of the
commonness part of Web Console.

WEB02-80
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB02-90

2.4 Before Using Web Console (You are requested to read this without fail)
The operation of Web Console is similar to the operation of Storage Navigator. Refer to Storage
Navigator Conventions of “Hitachi Device Manager - Storage Navigator User Guide”.

2.4.1 How to use maintenance PC’s directory

If you use maintenance PC’s directory, following this procedure. When maintenance PC’s
directory configuration is changed, you should execute again

• Installing License Key

• Downloading Audit Log
• Downloading Reports
• Exporting displayed information etc.

1. If you use storage media like a USB memory, insert it to maintenance PC in advance.
2. Right click “mntCltDrv.bat” on SVP’s desk top, select [Run as Administrator].

WEB02-90
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB02-100

Mounted Maintenance PC’s directory is displayed like “C (\\TSCLIENT) (j:)” on the file chooser of
Web Console.
NOTE: It’s impossible to use “C on {Maintenance PC’s name}”.

WEB02-100
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB02-110

2.4.2 Auto Account Lock

Two functions are available to avoid brute force attacks on user names and passwords. One of them
locks the user account for a given length of time, and the other disables the user account.

(1) Account lock function

When user login fails for a certain number of times in a row, the function locks the user
account for a given length of time.

(2) Account disabling function

When user login fails for the specified number of times in a row, the function disables the user
account.
NOTE: If all accounts registered to SVP are disabled, you cannot log into SVP
(Authentication can be done in the authentication server).
Prevent all accounts from being disabled.

For how to change to the function that disables user accounts and to change back to the function
that locks user accounts, see the INSTALLATION SECTION, “5.5 Switch the Auto Account Lock
Function” (INST05-05-10).

WEB02-110
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB02-120

2.5 Actions to Be Taken According to Result of Trouble shooting

Refer to Trouble shooting of “Hitachi Device Manager - Storage Navigator User Guide”.
NOTE: If the trouble is not solved in spite of it, collect a dump and restart the SVP.

Failure Recovery action Remarks

1 The Web Console on the SVP cannot be A LAN cable may fall out. Please confirm the NOTE
started and error (10,6027) occurred. LAN cable. If the LAN cable falls out, connect it
and reboot SVP.
The versions of Apache and SVP may mismatch.
Uninstall Apache and install it again. Refer to the
installation procedure of Apache in the WEB
CONSOLE SECTION for the installation
procedure.
Since the Web Console program different from
the microprogram version may be started, you
need to clear the cache of Java.
Select [Start]–[Control Panel], open the control
panel, start the control panel of Java, and clear the
cache file.
2 The Storage Navigator PC experiences SVP (a Web server) cannot recognize an IP
an error (10,6027), when accessing the address of Storage Navigator PC or HUB, and
SVP from the Storage Navigator PC. please confirm a following item, and figure 1 is
reference.
(1) Took off an external LAN cable of SVP by
installation work or maintenance work, and
does not restart do SVP?.
(2) Do not do restart of SVP by an Off state with
a power supply of LAN machinery
(HUB/router) connected to external LAN of
SVP with installation work or maintenance
work?
In case of above, connect external LAN cable of
SVP, and please turn a power supply of LAN
machinery (HUB/router) into an On state as well,
and restart SVP, and please access from Storage
Navigator movement PC SVP (a Web server)
from it once again.
3 The wrong information is displayed on Select [Start]-[Control Panel] on Web Console,
Storage Navigator regarding a product and then restart SVP.
name, a vender name and a function
name, etc.
(To be continued)

WEB02-120
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB02-130

(Continued from the preceding page)

Failure Recovery action Remarks
4 Web Console doesn’t start even if SVP Web Console doesn’t occasionally start while
is logged in remote desktop. changing the storage system configuration until
the change ends.
Please wait until the change ends.
Please confirm whether the storage system is
operated from RAID Manager etc. when Web
Console do not start for a long time.
5 The (20121 107024) error occurred on Please respond to the message, and exit the
the main window of Storage Navigator Storage Navigator main window by pressing [Alt]
on SVP. and [F4] key.
6 After the (20121 107024) error occurs Please exit the Storage Navigator main window
on the main window of Storage by pressing [Alt] and [F4] key.
Navigator on SVP, the (20121 107025)
error is repeatedly displayed.
7 It’s impossible to use maintenance PC’s Please use SVP’s directory to import or export
directory if SVP is logged in remote files.
desktop. If you install license key, please move license
• Installing License Key key’s file to SVP’s directory and use the file for
• Downloading Audit Log installing.
• Downloading Reports if you download a file, please download to SVP’s
• Exporting displayed information etc. directory and move the file for need.
8 The (20121 107096) error occurs Please exit the Storage Navigator main window
repeatedly on the main window of by pressing [Alt] and [F4] keys.
Storage Navigator on SVP.
9 After a remote desktop connection to See the “Storage Navigator Messages Guide” and
SVP is established, an error code is take the necessary action.
displayed in the ‘Wait for the start of
Storage Management Service’ window.

WEB02-130
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB02-140

When restart SVP by the state that LAN between SVP and Web Console is not connected to justly,
there is the case that gets impossible to start Web Console ((10,6027) error occurred).

Web Console PC
Case: 1 LAN HUB1 HUB2 LAN SVP

Recovery Action: In this case, please restart of SVP by a state of On with a power
supply of HUB2 by all means.

exclusive line
Web Console PC
router1 router2
Case: 2 LAN LAN SVP

Recovery Action: In this case, please restart of SVP by a state of On with a power
supply of router2 by all means.

Web Console PC
Case: 3 LAN SVP

Recovery Action: In this case, please restart of SVP by a state of On with a power
supply of Web Console PC by all means.

WEB02-140
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-10

3. Difference from the P.P. Manual

3.1 Local Replication
Select (CL) [Replication]-[Local Replication] at the left of the main window to open ‘Local
Replication’ window.

3.1.1 Initialize Local Replica Pairs

(1) Select (CL) [Actions]-[Local Replication]-[Initialize Local Replica Pairs] at the top of the main
window.

- Initialize Local Replica Pairs

It deletes all the pairs that have been formed by ShadowImage / ShadowImage for
Mainframe / Volume Migration / FlashCopy (R) V2 / FlashCopy (R) SE / Thin Image and
sets the pair status of the volume to Simplex (to SMPL, in the case of ShadowImage).
Refer to the TROUBLE SHOOTING SECTION “6.5 Initialization Procedure for
ShadowImage” (TRBL06-140) for the Initialize procedure and notes.
To operate the ‘Initialize Local Replica Pairs’, an entry of a password is required. For the
password, refer to the Technical Support Division.

NOTE1: When the Initialize Local Replica Pairs is performed, not only pairs formed by
ShadowImage for Mainframe, but also pairs formed by ShadowImage / Volume
Migration / FlashCopy (R) V2 / FlashCopy (R) SE / Thin Image are deleted.
NOTE2: Perform the operation only when it is directed by the Technical Support Division.

WEB03-10
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-20

3.1.2 Split Pairs window

Select (CL) [SI Pairs] at the application area to activate.
Select (CL) a volume in Duplex status.
Select (CL) [Split Pairs] to activate ‘Split Pairs’ window.
(If selecting volumes other than a volume in Duplex status, the operation fails.)

(1) [Split Type] drop-down list

Select migration VOL and open the ‘Split Pairs’ window.
The [Split Type] drop-down list is fixed in [Migration].

- Migration (split type)

Split pair operation by Migration is split type for exclusive use of Migration VOL.
It execute data migration by the migration VOL.

WEB03-20
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-30

3.1.3 Resync Pairs window

Select (CL) [SI Pairs] at the application area to activate.
Select (CL) a volume in Suspend(Mig.)/SUSPER status.
Select (CL) [Resync Pairs] to activate ‘Resync Pairs’ window.
(If selecting volumes other than a volume in Suspend(Mig.)/SUSPER status, the operation fails.)

(1) [Resync Type] drop-down list

Select Migration VOL and open the ‘Resync Pairs’ window.
The [Resync Type] drop-down list is fixed in [Migration(Primary > Secondary)].

- Migration(Primary > Secondary)

Resynchronize pair operation by Migration is Resynchronize Type for exclusive use of
Migration VOL. The copy direction for a normal resync operation is S-VOL to T-VOL,
with data migration by the migration VOL.

WEB03-30
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-40

3.2 Data Retention Utility

Select (CL) [Actions]-[Other Function]-[Data Retention...].

(1) Canceling the mode attribute

In the ‘Data Retention’ window, when the operation for changing the access attribute is
performed, [Mode Clear] is displayed in a pop-up menu.
Use this menu when you want to cancel the attribute, Zer and Inv.

NOTE: For the attributes, Zer and Inv, refer to “Provisioning Guide for Open Systems”.

WEB03-40
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-50

3.3 Universal Volume Manager

3.3.1 Mapping its own volumes
Provided that the External Volume is its own volume, it allows to be mapped as an external storage
device. But every LDEV of the external group must be allocated to another CLPR that is different
from one which is allocated to some internal LDEVs.

It is shown for example when mapping between own LU and own external group as following.

For example when mapping between own external group

CLPR 01

External Volume External Port

group

mapping between
own devices.

Parity Group
(Internal device) Target Port
LU

CLPR 02

LDEV

WEB03-50
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-60

3.3.2 Previous arrangement for mapping its own volumes

The procedure for mapping its own volumes is described below:

1. Login to SVP.
2. Select (CL) [Actions]-[External Storage]-[Edit Policies] on the web console to activate ‘Edit
Policies’ window.

3. Select (CL) [Enable] on [Internal Volume Usage] item, then select (CL) [Apply].

3.3.3 Note for mapping its own volumes

Mapping its own volumes could be done by SVP only.
The external volumes are available for data migration only.

WEB03-60
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-70

3.4 Remote Replication

3.4.1 Remote Replica Function Switch
Select (CL) [Actions]-[Remote Replication]-[Edit Remote Replica Function Switch] menu at the
top of the Storage Navigator main window to activate ‘Edit Remote Replica Function Switch’
window.

WEB03-70
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-80

3.4.1.1 Edit Remote Replica Function Switch

In ‘Edit Remote Replica Function Switch’ window, select (CL) function switch to be changed.
Select (CL) the [Enable], [Disable] button.
When select (CL) the [Finish] button, confirmation window is displayed. Check the task name, and
select (CL) the [Apply] button.
NOTE: Perform the operation only when it is directed by the Technical Support Division.
NOTE: Please refer to “3.4.1.2 Remote Copy Function Switch” for the function allocated in
each switch.

WEB03-80
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-90

3.4.1.2 Remote Copy Function Switch

The function allocated in each switch is as follows.

Switch# Contents
7 Do not report SSB of F/M = FB to HOST.
11 A copy pace is made a maximum 32 Tracks, when “15 Tracks” is selected in the Remote Copy
option parameter and “Track” is selected in the Difference Management. But this function is
not applied for OPEN-V, and a copy pace is set “4 Tracks” for OPEN-V.
12 When Add Pair or Resume Pair is operated with the Mainframe Host/Raid Manager, Only M-
VOL is setup in the CFW Data option.
15 The path failure threshold values of function switch #17 are changed. By the combination of
function switch #15 and #20 the path failure threshold values are changed.
17 The path is blocked when the number of path failures reaches the threshold within a certain
period.
18 The path is blocked when the number of link failures reaches the threshold within a certain
period
20 The path failure threshold values of function switch #17 are changed. By the combination of
function switch #15 and #20 the path failure threshold values are changed.
21 When Add Pair or Resume Pair is operated with the PPRC command for DKC Emulation =
2107, 3 Tracks is setup in the Initial Copy Pace option.
30 The following functions are supported.
• When the pair from Storage Navigator is formed, the pair is formed with SyncCTG#7F.
• When all the connections from MCU-RCU PATH cut, S-VOL that belongs to
SyncCTG#7F is suspended.
33 In the cases that a PDCM function of McData ES3232 is being used on MCU-RCU path, when
response of LOGIN response is late, path status of MCU is changed to non-normal.
36 This bit specifies “Enable” in time stamp option at Add Pair or Resume Pair from GDPS/
Raid Manager.
TC-MF/UR-MF cascade form makes time stamp option of TC-MF “Enable”, and keeps
Consistency of UR-MF.
But, the TC-MF pair formation or Resume Pair with GDPS/Raid Manager uses an optional
time stamp and because “Enable” cannot be directed, this bit is used.
41 The path is blocked when the number of RIO response time that exceeds the decided time
reaches the threshold within a certain period. The decided time is changed by combination of
function switch #41 and #42.
42 The path is blocked when the number of RIO response time that exceeds the decided time
reaches the threshold within a certain period. The decided time is changed by combination of
function switch #41 and #42.
43 In the function of switch #17 or switch #41 and #42, the path is blocked even if the number of
path is less than that is set by minimum path.

WEB03-90
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-100

3.4.2 Complete SIMs

3.4.2.1 Complete SIMs (TC)
SIM for TrueCopy for Mainframe is deleted. Use this menu when you want to delete SIM before
OS IPL.

(1) Select (CL) [Actions]-[Remote Replication]-[Complete SIMs (TC)] at the top of the main
window.

NOTE: By this operation, when SIM for TrueCopy for Mainframe is deleted, SIM for
TrueCopy is also deleted. TrueCopy for Mainframe only cannot be deleted. The SIM
for total storage system is deleted.

WEB03-100
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-110

3.4.2.2 Complete SIMs (UR)

Use this menu when you want to delete SIM for Universal Replicator for Mainframe.

(1) Select (CL) [Actions]-[Remote Replication]-[Complete SIMs (UR)] at the top of the main
window.

NOTE: By this operation, when SIM for Universal Replicator for Mainframe is deleted, SIM
for Universal Replicator is also deleted. Universal Replicator for Mainframe for
Mainframe only cannot be deleted. The SIM for total storage system is deleted.

WEB03-110
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-120

3.4.3 Assign Remote Command Devices window

Select (CL) [Mirrors] at the application area of ‘Remote Replication’ window.
Select (CL) mirrors in Initial, Active, Halt, Stopped, Hold, Holding, or Hold(Failure) state.
Select (CL) [Assign Remote Command Devices] to activate ‘Assign Remote Command Devices’
window. (When mirrors other than above state are selected, the operation fails.)
Remote Command Devices can be assigned to mirror in Initial state only when mirror ID is 0.

(1) [Remote Command Device] drop-down list.

[Not to Use] is displayed at [Remote Command Device] drop-down list.
- Not to USE
[Not to Use] is selected when not using Remote Command Devices.

WEB03-120
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-130

3.5 Release Mainframe Command Devices

The command device for Business Continuity Manager is deleted in the lump.
Use this menu when you want to delete command device for Business Continuity Manager after
removed the Business Continuity Manager.

(1) Select (CL) [Actions]-[Logical Device]-[Release Mainframe Command Devices] at the top of
the main window.

NOTE1: Command devices for Business Continuity Manager are deleted by this operation.
But when external volumes used by Universal Volume Manager are defined as
command devices, they are not deleted.
NOTE2: To find the command device for Business Continuity Manager, use the ‘Logical
Device’ window. For more information about the ‘Logical Device’ window, see
“Hitachi Device Manager - Storage Navigator User Guide”.
NOTE3: By this operation, when Command devices for Business Continuity Manager are
deleted, confirm that Shared memory which is required in TrueCopy for Mainframe
has been installed.

WEB03-130
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-140

3.6 Dynamic Provisioning/Dynamic Tiering/Dynamic Provisioning for Mainframe/Dynamic

Tiering for Mainframe

(1) Initialize Pools

Select (CL) [Actions]-[Pool]-[Initialize Pools] at the top of the main window.

The Virtual Volumes of Dynamic Provisioning / Dynamic Tiering / Dynamic Provisioning for
Mainframe / Dynamic Tiering for Mainframe (DP-VOL) is blockaded. And the pool of all
Dynamic Provisioning / Dynamic Tiering / Dynamic Provisioning for Mainframe / Dynamic
Tiering for Mainframe / Thin Image is blockaded.
Refer to the TROUBLE SHOOTING SECTION “13.9 Initialization Procedure for Pool”
(TRBL13-110) for the Initialize procedure and notes.
To operate the ‘Initialize Pools’, an entry of a password is required. For the password, refer to
the Technical Support Division.

WEB03-140
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-150

NOTE1: The pool of all Dynamic Provisioning / Dynamic Tiering / Dynamic Provisioning for
Mainframe / Dynamic Tiering for Mainframe / Thin Image is blockaded.
NOTE2: In the case [TrueCopy / Universal Replicator / ShadowImage / Volume Migration /
XRC / FlashCopy (R) V2 / FlashCopy (R) SE] use virtual volumes of Dynamic
Provisioning / Dynamic Tiering / Dynamic Provisioning for Mainframe / Dynamic
Tiering for Mainframe, delete all [TrueCopy / Universal Replicator / ShadowImage /
Volume Migration / XRC / FlashCopy (R) V2 / FlashCopy (R) SE] pairs that use the
virtual volumes before performing Initialize.
After Initialize completes, create [TrueCopy / Universal Replicator / ShadowImage /
Volume Migration / XRC / FlashCopy (R) V2 / FlashCopy (R) SE] pairs again.
During initialize, don’t create [TrueCopy / Universal Replicator / ShadowImage /
Volume Migration / XRC / FlashCopy (R) V2 / FlashCopy (R) SE] pairs with virtual
volumes of Dynamic Provisioning / Dynamic Tiering / Dynamic Provisioning for
Mainframe / Dynamic Tiering for Mainframe. In the case those pairs, initialize and
paircreate operation may fail.
NOTE3: Delete all Thin Image pairs before performing Initialize.
After Initialize completes, create Thin Image pairs again.
During Initialize, don’t create Thin Image pairs. In the case create Thin Image pairs,
initialize and paircreate operation may fail.
NOTE4: Do not execute the maintenance of Dynamic Provisioning until the pool restores
normally after executing Initialize.
NOTE5: Procedure to recover DP-VOL:
Please recover the pool of Dynamic Provisioning / Dynamic Tiering / Dynamic
Provisioning for Mainframe / Dynamic Tiering for Mainframe referring to
“Provisioning Guide for Open Systems” or “Provisioning Guide for Mainframe
Systems”.
DP-VOL recovers by recovering the pool of Dynamic Provisioning / Dynamic Tiering
/ Dynamic Provisioning for Mainframe / Dynamic Tiering for Mainframe.
NOTE6: Perform the operation only when it is directed by the Technical Support Division.

WEB03-150
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB03-160

3.7 Change SCP Time

Select (CL) [Actions]-[Local Replication]-[Edit SCP Time] at the top of the main window to
activate ‘Edit SCP Time’ window.

(1) Changing the SCP Time

(a) In the ‘Edit SCP Time’ window, select (CL) all CUs to which the SCP Time exceeding
600 seconds is set, and select (CL) [Change SCP Time] button.
(b) ‘Change SCP Time’ window will appear.
(c) In the ‘Change SCP Time’ window, enter 120 seconds (default value) and select (CL)
[OK] button.
(d) Select (CL) [Finish] button on the ‘Edit SCP Time’ window.
(e) In the ‘Confirm’ window, select (CL) [Apply] button.

WEB03-160
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB04-10

4. IPv6 Setting
You can use Web Console and Storage Navigator (Remote Web Console in case of HP version)
with IPv6.

Internet Protocol Version used for the connection of Storage Navigator switches depending on the
network setting of the PC which operates the SVP and Storage Navigator. A list of the setting of the
PC which operates the SVP and Storage Navigator and Internet Protocol Version used for the
connection is shown below.

Table 4-1 List of Internet Protocol Version used for the Connection
Network Setting
SVP IPv4 IPv6 IPv4 IPv6 IPv4 IPv6
Client
Enabled Enabled Enabled Disabled Disabled Enabled
Network IPv4 Enabled Connected by IPv4 Connected by IPv4 Connected by IPv6
Setting IPv6 Enabled
IPv4 Enabled Connected by IPv4 Connected by IPv4 Connection disabled
IPv6 Disabled
IPv4 Disabled Connection disabled Connection disabled Connected by IPv6
IPv6 Enabled (*1)
IPv4: Internet Protocol Version 4 (TCP/IPv4)
IPv6: Internet Protocol Version 6 (TCP/IPv6)
Client: PC which operates Storage Navigator (Remote Web Console in case of HP version)
*1: If you make only IPv6 enabled for the setting of the PC which operates Storage Navigator
while keeping both IPv6 and IPv4 enabled for the setting of the SVP, you cannot use
Storage Navigator. When communicating only with IPv6, set both PCs which operate the
SVP and Storage Navigator as IPv6.

WEB04-10
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB04-20

Perform the following when using Web Console only with IPv6.
(1) Launch the Network and Sharing Center
Select (CL) [Start]-[Control Panel] and launch
(double-click) the “Network and Sharing
Center”.

(2) Launch the Network Connections

Select (CL) “Change adapter settings”.

(3) Open the Connection Properties window

Right-click on the icon of “Public LAN” and
select “Properties” from the displayed popup
menu. Select (CL) “Continue” when the
confirmation window is displayed.

WEB04-20
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB04-30

(4) Set properties

When the property is displayed, uncheck the checkbox
of “Internet Protocol Version 4 (TCP/IPv4)” in the list.
Select (CL) [OK] and close the window.

(5) Operate SVP window

Change to [Modify Mode].

(6) Open Install window

Select (CL) [Install] from [SVP].

WEB04-30
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB04-40

(7) Set SVP properties

Select (CL) [Set IP address] from the ‘Install’
window.
Uncheck the checkbox of IPv4 of “Use
Internet Protocol” and select (CL) [OK].

(8) Insert the Config media

Insert the medium containing the
configuration information in the specified
location and select (CL) [OK].

(9) Take out the Config media

When the copying of the configuration information is
completed, a message, “Please remove the Config
media.” is displayed.
Take out the medium containing the configuration
information and select (CL) [OK].

WEB04-40
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB04-50

(10) Make sure of the restart of the SVP

Select (CL) [OK].
The SVP is disconnected from the maintenance PC.
After waiting for about five minutes, reconnect the SVP that
has been replaced to the maintenance PC.

WEB04-50
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-10

5. Procedure of server software uninstallation/installation

Please accord to the following procedures if you reinstall Apache, Tomcat, or Flash player.

5.1 Apache
5.1.1 Uninstallation of Apache
Before reinstalling Apache, you need to uninstall the Apache already installed in the SVP. Uninstall
the Apache in the following procedure.
NOTE: After uninstallation of Apache is finished, you must next complete the procedure in
“5.1.2 Installation of Apache” before modifying any other software product on the
SVP. If you shutdown or logout the SVP before being instructed to in “5.1.2
Installation of Apache”, you may corrupt the SVP causing it to no longer function
properly. If a shutdown request message is displayed by the software product during
uninstall/install, please disregard.

(1) Mount the OSS media

Insert the OSS media (the second media) to the CD-ROM drive in the Maintenance PC.

(2) Launch the Command Prompt as administrator

Select (CL) [Start]-[All Programs]-[Accessories], and launch the Command Prompt with ‘Run
as administrator’ in right-click menu.

WEB05-10
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-20

(3) Launch the uninstallation batch

Enter “\\tsclient\e\JavaAp\Apache\ApacheUnInst.bat” into the Command Prompt, and press the
Enter key.
At the end of this process, the Command Prompt will close automatically.

NOTE: The input value is the form of

“\\tsclient\<drive letter>\JavaAp\Apache\ApacheUnInst.bat”.
A drive letter is made the drive which inserted the OSS media.

The above is a case where the CD-ROM drive is assigned a drive letter E.

NOTE: After uninstallation of Apache is finished, you must next complete the procedure in
“5.1.2 Installation of Apache” before modifying any other software product on the
SVP. If you shutdown or logout the SVP before being instructed to in “5.1.2
Installation of Apache”, you may corrupt the SVP causing it to no longer function
properly. If a shutdown request message is displayed by the software product during
uninstall/install, please disregard.

WEB05-20
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-30

5.1.2 Installation of Apache

When installing Apache, follow the procedure shown below. Be sure to check that the uninstallation
processing is completed before installing it.

(1) Mount the OSS media

Insert the OSS media (the second media) to the CD-ROM drive in the Maintenance PC.

(2) Launch the Command Prompt as administrator

Select (CL) [Start]-[All Programs]-[Accessories], and launch the Command Prompt with ‘Run
as administrator’ in right-click menu.

WEB05-30
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-40

(3) Launch the installation batch

Enter “\\tsclient\e\JavaAp\Apache\ApacheInst_StandAlone.bat” into the Command Prompt,
and press the Enter key.
At the end of this process, the Command Prompt will close automatically.

NOTE: The input value is the form of

“\\tsclient\<drive letter>\JavaAp\Apache\ApacheInst_StandAlone.bat”.
A drive letter is made the drive which inserted the OSS media.

The above is a case where the CD-ROM drive is assigned a drive letter E.

The things of default are set in the key creation for SSL communication and the certificate file.
When you install an SSL communication key and a certificate file responding to the customer’s
request, see “Hitachi Device Manager - Storage Navigator User Guide”.

WEB05-40
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-50

(4) Launch the Command Prompt as administrator

Select (CL) [Start]-[All Programs]-[Accessories], and launch the Command Prompt with ‘Run
as administrator’ in right-click menu.

(5) Reboot the SVP

Enter “shutdown /r /t 0” into the Command Prompt, and press the Enter key.
The SVP will be rebooted.

NOTE: When the SVP High Reliability Kit is installed, you need to install it for the standby
SVP in the same procedure.
About the switching SVP, refer to Post-Procedure “2.17. SVP Switching” in the “SVP
SECTION”.

WEB05-50
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-60

5.2 Tomcat
5.2.1 Uninstallation of Tomcat
Before reinstalling Tomcat, you need to uninstall the Tomcat already installed in the SVP. Uninstall
the Tomcat in the following procedure.
NOTE: After uninstallation of Tomcat is finished, you must next complete the procedure in
“5.2.2 Installation of Tomcat” before modifying any other software product on the
SVP. If you shutdown or logout the SVP before being instructed to in “5.2.2
Installation of Tomcat”, you may corrupt the SVP causing it to no longer function
properly. If a shutdown request message is displayed by the software product during
uninstall/install, please disregard.

(1) Launch the Control Panel

Select (CL) [Start]-[Control Panel].

WEB05-60
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-70

(2) Launch the Program and Features

Select (DC) [Programs and Features].

(3) Run uninstallation

Select (CL) [Apache Tomcat 7.0 Tomcat7 (remove only)], and select (CL) [Uninstall/Change]
button.

WEB05-70
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-80

(4) Proceed to the next

Select (CL) [Uninstall] button.

(5) Make sure the massage

If following message box is displayed, select (CL) [Yes].

WEB05-80
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-90

(6) Complete uninstallation

When “Uninstallation Complete” dialogue box is displayed, select (CL) [Close] button.

(7) Check the result and close the window

[Apache Tomcat 7.0 Tomcat7 (remove only)] in ‘Programs and Features’ window was deleted.
Close the window.

NOTE: After uninstallation of Tomcat is finished, you must next complete the procedure in
“5.2.2 Installation of Tomcat” before modifying any other software product on the
SVP. If you shutdown or logout the SVP before being instructed to in “5.2.2
Installation of Tomcat”, you may corrupt the SVP causing it to no longer function
properly. If a shutdown request message is displayed by the software product during
uninstall/install, please disregard.
WEB05-90
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-100

5.2.2 Installation of Tomcat

When installing Tomcat, follow the procedure shown below. Be sure to check that the uninstallation
processing is completed before installing it.

(1) Mount the OSS media

Insert the OSS media (the second media) to the CD-ROM drive in the Maintenance PC.

(2) Launch the Command Prompt as administrator

Select (CL) [Start]-[All Programs]-[Accessories], and launch the Command Prompt with ‘Run
as administrator’ in right-click menu.

(3) Launch the installation batch

Enter “\\tsclient\e\JavaAp\install_Win7_64_Tomcat.bat” into the Command Prompt, and press
the Enter key.

NOTE: The input value is the form of

“\\tsclient\<drive letter>\JavaAp\install_Win7_64_Tomcat.bat”.
A drive letter is made the drive which inserted the OSS media.

The above is a case where the CD-ROM drive is assigned a drive letter E.

WEB05-100
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-110

(4) Proceed to the next

Select (CL) [Next>].

(5) Proceed to the next

Select (CL) [I Agree].

(6) Proceed to the Next

Select (CL) [Next>].

WEB05-110
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-120

(7) Proceed to the next

Select (CL) [Next>].

(8) Proceed to the next

Select (CL) [Next>].

(9) Proceed to the Next

Select (CL) [Install].

WEB05-120
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-130

(10) Wait while installing

(11) Finishing installation

Uncheck all the checkboxes, and select (CL)
[Finish].

(12) Launch the Command Prompt as administrator

Select (CL) [Start]-[All Programs]-[Accessories], and launch
the Command Prompt with ‘Run as administrator’ in right-
click menu.

WEB05-130
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-140

(13) Reboot the SVP

Enter “shutdown /r /t 0” into the Command Prompt, and press the Enter key.
The SVP will be rebooted.

NOTE: When the SVP High Reliability Kit is installed, you need to install it for the standby
SVP in the same procedure.
About the switching SVP, refer to Post-Procedure “2.17. SVP Switching” in the “SVP
SECTION”.

WEB05-140
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-150

5.3 Flash Player

5.3.1 Uninstallation of Flash Player
Before reinstalling Flash Player, you need to uninstall the Flash Player already installed in the SVP.
Uninstall the Flash Player in the following procedure.

(1) Launch the Control Panel

Select (CL) [Start]-[Control Panel].

(2) Launch the Program and Features

Select (DC) [Programs and Features].

WEB05-150
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-160

(3) Run uninstallation

Select (CL) [Adobe Flash Player 11 ActiveX], and select (CL) [Uninstall].

(4) Starting uninstallation

Select (CL) [UNINSTALL].

(5) Finishing application

If some applications were using Flash Player, the application name is displayed.
Please finish the applications.

WEB05-160
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-170

(6) Finishing uninstallation

Select (CL) [DONE].

(7) Check the result and close the window

[Adobe Flash Player 11 ActiveX] in ‘Programs and Features’ window was deleted.
Close the window.

WEB05-170
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-180

5.3.2 Installation of Flash Player

When installing Flash Player, follow the procedure shown below. Be sure to check that the
uninstallation processing is completed before installing it.

(1) Mount the OSS media

Insert the OSS media (the second media) to the CD-ROM drive in the Maintenance PC.

(2) Launch the Command Prompt as administrator

Select (CL) [Start]-[All Programs]-[Accessories], and launch the Command Prompt with ‘Run
as administrator’ in right-click menu.

(3) Launch the installation batch

Enter “\\tsclient\e\JavaAp\install_Win7_64_Flash.bat” into the Command Prompt, and press
the Enter key.

NOTE: The input value is the form of

“\\tsclient\<drive letter>\JavaAp\install_Win7_64_Flash.bat”.
A drive letter is made the drive which inserted the OSS media.

The above is a case where the CD-ROM drive is assigned a drive letter E.

WEB05-180
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB05-190

(4) Finishing Web Console

If running Web Console, “This will end the Web Console.”
message is appeared.
Select (CL) [OK].

(5) Starting installation

Select (CL) [I have read and agree to the
terms of the Flash Player License
Agreement.], and select (CL) [INSTALL].

(6) Finishing installation

Select(CL) [Never check for updates (not
recommended)].
Select (CL) [DONE].

NOTE: When the SVP High Reliability Kit is installed, you need to install it for the standby
SVP in the same procedure.
About the switching SVP, refer to Post-Procedure “2.17. SVP Switching” in the “SVP
SECTION”.

WEB05-190
Hitachi Proprietary DKC810I
Rev.0 / Dec.2013 Copyright © 2013, Hitachi, Ltd.
WEB06-10

6. Before using the Alert setting/FTP transfer function

The setting of the Syslog/FTP server is required to use the Alert setting/FTP transfer function. Ask
the customer to set the address of the Syslog/FTP server.
Refer to “Audit log GUI reference” in “Hitachi Audit Log User Guide” for the details of the setting.

WEB06-10