INDIAN INSTITUTE OF INFORMATION TECHNOLOGY KOTA

B.Tech. (CSE+ECE), Semester - II

Mid Term Examination, Even Semester 2022-23
Electronic Deviccs and Circuits (ECT102)
Marks: 30(Weightage - 30%) Time: 90minutes Date: May 8, 2023
Note: Attempt all qucstions in sequence, Attempt all parts of a qucstion at onc placc. Show all the
steps.
Q1. The intrinsic rcsistivity of Ge is 47 2-cm at 300 K. Thc mobility ofI lolcs for Ge is 1900 cm/V
scc and mobility of Elcctrons for Gec is 3900 cm/V-scc. |4M]
a) Find the intrinsic carricr concentration.
b) Drift velocity of holcs and clectrons for applicd Elcctric ficld of 100 V/cm.
Q2. For the circuit shown in Fig. A, find the maximum and minimum values of Zener diode current.
[4M]

80- 120 V 7 50 V

Fig. A
Q3. Design the diode based circuit using p-n junction diodc and/or Zener diode and/or other
necessary components to achieve the output waveform shown in Fig. B. Assumc the input signal
given to thc circuit is 10 sin 200nt volts. 4M)

2.7V
~4.7V

Fig. B
Q4. Draw and claboratc the input and output characteristics of CB and CE Configurations of BJT.
14M]

Os. For the diode circuit shown in Fig. C, V,=6 V and the silicon diodes have a saturation current
of l nA at 300 K. Find R1 and R, for the casc that vy - 0.7 Vandv =0.65 Vat 300 K. [4M]

R Ry
D1 D

Fig. C

Page 1 of 2
 100 kS2,
Q6. For the (E transistor circuit shown in Fig, D, given that VHB 5 V, Vce 15 V, Roperation
R 2 ks2. B 100, Va, ACIIV: 0.7 V and lcBo 0mA. Assume active region of for
|4M)
npn transistor and determinc the valucs of lp, lc, lE, and VcE.
lc Rc

|
RB IB
B

VCE Vcc

VBB VBE |IE

Fig. D
and cquation: Contact
Q7. Explain the following terms bricfly with ncccssary schematic diagram Ideal diode model,
potential for a pn junction diode, Transition capacitance for a pn junction diode, |6M]
Clamper circuit.
*** The nd ***
 INDIAN INSTITUTE OF INFORMATION TECHNOLOGY KOTA

Even Semester 2022-23, Mid-term Examination

MAT 102 Mathematics -II

May 3, 2023 Time duration: 1.5hrs

INSTRUCTIONS:

1. This examination paper contains FIVE questions and comprises TWO

printed pages including thisone. Allquestions are to be answered.
2. The marks for each question are indicated on the right. Notation and
terminology are and should be as defined in the class.
3. Answer each question beginning on a FRESH page. All parts of a
question must be answered together in one place. If multiple answers
are provided for any question,only the first attempt willbe graded.
4. NOCALCULATORS, mobiles or any other electronicdevices should
be found in your possession.

Question 1.
i) Which ingredient from vector calculus did we use while proving Cauchy's
integral theorem in the lectures?
ii) Evaluate f sin zdz, where C is given by +y=1. Justify. (2]
ii) Let C be the positively oriented circle of radius r around o EC. Using
appropriate change of variables, show that
dz 2ri if n=1, and
if n is any other integer.

Question 2. If a particle moves with a constant speed c, show that its

acceleration vector a(t) is perpendicular to its velocity vector v(t). [4)
Question 3. Find a unit normal vector and the equation of the tangent
plane to the surface y = z2 + 2 at (-1,2, -1). (5]

1
Question 4. Let a point charge qq be placed at the origin in R. The
Coulomb force experienced by a unit charge at position r is given by
1 g

where n is the unit vector in the same direction as r and [o is the electric
constant. Show that the resulting vector field is conservative.

Question 5.
i) SuppOse f:C’C. Is it true that lim, f(z) is unique if it exists? If
yes, give an argument in support. If not, provide a counterexample. 4

ii) For which points in the complex plane is the function

f(z) = e

differentiable? Why? 5)

Citius, Altius, Fortius

2
 Indian Institute of Information Technology, Kota
IISemester B. Tech. (Branches: CSE & ECE)
Mid-Term Exam ination, Even Sem ester 2022-23
Health, Safety & Environment (OTT-102)
Max. Marks: 30 Time: 90 min
Date: May 2, 2023

Important Instruction
Attempt AIl Questions.
i. AllQuestions Carry Bqual Marks.
iii. Only Scientific Calculator is Allowed.
1 Howaccidents can be avoided using inherent safety, discuss the major approaches (4)
to inherently safer process design.
2 Discuss various workplace hazards, what are the various personal protective (4)
equipment available to minimize worker exposure to workplace hazards.
3 Explain (a) Relative toxicity (b) Dose-related events quantification using various (7)
mathematicalexpressions (c) Predict the potential deaths for the below incident.
A risk assessment study scenario involves 2000 workers being exposed to LPG
cylinder leakage, at times 10, 20, 50, and 150 the exposure concentration are 50,
100, 200, and 400ppm, respectively. The probit LPG constants are a =-13.22, b=
1.0, n = 2.3.

4 Discuss various physical workplace hazards, and how to anticipate, recognize, (6)
evaluate, and control the physical workplace hazards?

Discuss the different toxic effects if more than one chemical is present. Sketch (6)
the toxic blood level concentration as a function of the route of exposure.
6 Explain various exposure guidelines and standards? (3)

Probits

Percentogee
 INDIAN iHSTITUTEOF INFORMATION TECHNOLOGY, KOTA
E.Tech. (CSE and ECE) Iyear, Semester- II
Mid Term Examination, Even Semester 2022-23
Technical Writing and Presentation Skills (TWPS) (HST 102)
Time: 1.5 hrs. MM: 30(Weightage -30%) Date: 4h May, 2023
Instructions: All questionsare compulsory.
Follow the order of questions and do all questions of same section together.
SECTION A: Answer the following question in about 120 words each (3* 4=12)
1. What is Technical Writing? Pont out 5 ways in which it is different from academic writing. Also explain briefly the
7C's of Effective Technical communication?
2. What is 'Cross- Cultural Comnunication? What is the need to understand cross cultural communication and how
can a global mindset be developed?
3. ldentify the different dimensions of culture and explain them. Also draw a labeled cultural lceberg.
4. What is Negotiation? What are the different approaches of Negotiations? Explain with a help of a quadrant
diagram.
5. Explain the following terms in not more than 30 words each. (1*8=8)

a) Stereotype b) Melting Pot c) Cultural Synergy d) plagiarism

e) Bcc and Cc in emails f) use of visuals in ppts g) voice inflection h)transition markers

SECTION B: Writing Skills (3)

6 As the Sales Manager of a company, draft an emailreply which has to be sent to three customers who have
complaint about your preduct. Invent necessary details to convey your point.

SECTION C: Vocabulary
7. Give the meaning of the foBlowirg wnrd pairs. (3)
a) affect/ effect b) adept/adopt c) augment/supplement

8. Fill in the bl:ar: ner subject-verb agreement: (2)

a) The-nur:!:.*!i'5. increasing in the technology sector.
b) Each of L. going at top speed.

9. Give the mean'.., . fuoing vdts (2)

a) Boisterous
b) Enervate
c) Clandest'
d) vociferous
 INDIAN INSTITUTEOF INFORMATION TECHNOLOGY KOTA
B.Tech. (CSE+ECE), Semester II
MidTerm Examination, Even Semester 2022-23
Fundamentals of Electrical Engineering (ECT104)
Marks: 30 (Weightage - 30l%) Time: 90minutes Date: 6'h May 2023

Instructions:
(a) There are a total of six questions. Allquestions are compulsory.
(b) Assume suitable data (if any).
(c) Calculators are allowed.

1.A power transformer, rated at 2300 : 230 V, 60 Hz, 46 kVA, is to be modeled as a non-ideal
transformer. When the high-voltage winding is the primary, the open circuit test results inreadings
of 2300 V, 0.35 A, and 400 W; and the short circuit test results in 40 V, 20A, and 350 W. Find the
model parameters Rm, Xm, Rs, and Xs. (6 marks)

2. Find v:(t) for the circuit shown in Fig. (1). Given vi(t) = Scos(6t+30°). (5 marks)

1H

Fig (1)
3. For the ideal transformer circuit in Fig. (2), N = 0.1 and Z= 10 KQ2. Find (a) Zi. for maximum
power. (t) Vli, and (c) V,/Vg. (5 marks)

Fig. (2)
4. The coiiof a moving coil voltmeter is 40 mm long and 30 mm wide and has l00 urns or
it. The control spring exerts a torque of 240 x 10- N-m when the deflection is l00
divisions on full scale. If theflux density of the magnetic field in the air gap is 1.0 Wb/m
estimate the resistance that must be put in series with the coil to give one volt per division.
The resistance of tlhe volt1meler coil may be neglected. (5 marks)

5. The fout arms ofa Wheatstone bridge are as follows: AB = 100 2, BC = 102, CD =4 2
and DA =50 S2.The galvanometer has a resistance of 20 2 and is connected across BD. A
source of 10V d.c. is connected across AC. Find the current through the galvanometer.

Page 1 of 2
 What should be the resistance in the arm DA for no current through thegalvanometer?
(4 marks)
6. A sheet of bakelite 4.5 mm thick is tested at 50 Hz between electrodes 0.12 m in diameter.
The Schering bridge (shown in Fig. (3)) employs a standard air capacitor C2 of 106 pF
capacitance, a non-reactive resistance R4 of 1000/ 2 in parallel with a variable capacitor
C4=0.5 uF, and a non-reactive resistance R3.
E b

d
E

Fig. (3)

Balance is obtained with CA =05 uF and R3 = 260 Q. Calculate the capacitance C1,
dissipation factor and relative permittivity of sheet. (Assume so =8.84 x 1012 F/m=
permittivity of free space) (5 marks)

<XXX <XXXXXXXXXX---.
Allthe best
 Indian Institute of Information Tcchnology, Kota
B.Tech. (Computer Scicnce and Engincering), II Semester
Mid Term Examination, Even Semester (2022-23)
Data Structures and Algorithms (CST102)
Time: 90 minutes Date: 9/05/2023
Marks: 30(Weightage - 40%)

Question 1 (3 Marks)
State truc or false, if true writc constant valucs (c and n,) to justify thc answcr.
f(n) is f(n) =0 (n) ?
log n

n!

Question 2
Analyze the running time complcxity for the following code. (3Marks)

int i= 1;
for(; i<=n logn; il+)
for(it; i<-n; it)
{
printf("1")

Question 3 (4 Marks)
Which of the sorting method will be best if the number of swappings donc is thc only
mcasurc of thecficicncy? Justify your answcr with an appropriate cxamplc.
Question 4 (1.512+ 1.5 = 5 Marks)
Discuss Quicksort with center as pivot with suitable example, algorithm, and cxplanation for
the algorithm.
Question 5 (243 5 Marks)
Analyze thc average number of comparisors performcd by the merge sort algorithm, in
merging two sorted lists of length n. Justify your answer with an appropriate cxample.
 Question 6 (5 Marks)
wherc the width of cach bar
Givcn an array of intcgcrs reprcscnting thc histogram's bar hcight
is 1, Writc an algorithm to return thc arca of the largcst rcctanglc in thc histogram.
Input: hcights [2,1,5,6,2,3]
Output:l0
Explanation: Thc abovc is a histogram wherc the width of cach bar is 1.
The largcst rcctanglc is shown in thc rcd arca, which has an arca = 10 units.

6
10
3 3
2 2
1
Qucstion 7 (5 Marks)
Given an unsorted array Arr of size N of positive integers. One number 'A' from set {1, 2,
..N} is missing and onc number 'B' occurs twice in the array. Write an algorithm to find
these two numbers.
Examplc Input:N =2, Arr[]- (2, 2] Output: Missing number is 1and Repcating Number is 2
Example nput:N =4, Ar[]-2, 2, 3,1]
Output: Missing number is 4 and Repcating Number is 2.

---Best Wishes

Page 2 of2