Annex B
Annex B
Annex B
Compliant
Flexible Learning Requirements: Remarks
Yes No
A. General Requirements
1. Letter of Intent/Application add/shift the
delivery mode to either Blended Learning,
Letter of Intent/Application
Distance Learning and Face-to-Face
Learning
2.Certificate of Concurrence (TESDA-OP-
Not Applicable
CO-01-F02);
3.Certified true copy of the Certificate of
TVET Program Registration (CTPR) of the
registered TVET program (if initially Not Applicable
registered prior application for flexible
learning);
4.Updated CBC (indicating
the learning modes to be
used) (TESDA-OP-CO1-
F11)
4.Updated CBC (indicating the learning a.1 Course Design;
modes to be used) (TESDA-OP-CO1-F11) b.2 Modules of Instruction/s.
a.1 Course Design;
b.2 Modules of Instruction/s. with integration of
Supervised Industry
Learning, Flexible Learning
Delivery and 21st Century
Skills
5. List and Profile of Trainer:
a. The trainer must be a holder of 1.List of Trainer
NTCC/provisional NTTC on the Manpower Profile NMIS 01-
qualification he/she will be teaching/ A
conducting, for WTR programs;
and/or
NC
b. The trainer must have an
TMC
appropriate training certificate as
NTTC
evidence of his/her competency in
Facilitate E-Learning
facilitating online/ flexible/distance
Sessions
learning or combination ( for WTR
and NTR program).
6. Training Plan- indicating the Unit of
Competency, The Module Title, the
Learning Outcomes and the Learning
Contents covered for every LO specifying Training Plan
the modality/ies to be applied for every
Learning Content, and the Learning
Resources.
B.2 For Blended Learning Delivery Mode ( online and face to face/ classroom setting)
1.Requirements listed in Letter B; and
2.Offline electronic technology and resources to
support the Blended Learning Delivery mode such as
but not limited to the following:
● Digitized learning materials such as CBLM and
other instructional learning materials, videos
and interactive contents;
● Downloaded digital contents in LMS.
3. Competency- Based Workshop area with the
required learning systems or equipment and tools,
where the face-to-face instruction is conducted (for
the face-to-face portion).
Compliant
Program Registration Requirements Remarks
Yes No
● Audio-Visual-radio, audio cassettes, slides,
films, videotapes, television, telephone, fax.
C. Administrative Protocols
1.Mandatory Learning Module- “Practicing Covid-19
Preventive Measures in the Workplace”;
2.Entry Protocols to the premises of Institutions for
learners, Employees, Teaching, Non-Teaching Staff
and visitors e.g. Signage on ‘No Mask, No Entry
Policy’ and ‘Maintain 1 Meter Social Distancing’, in all
entrances and exits of the institution and workshops (
attach a picture that signages are in place);
3.Provision of Hygiene Protocols such as the
presence of disinfection areas and disinfectants
within easy access for everyone, health checks and
temperature scanning should be in place in the
training center e.g foot bath before entering the
premises.
(attached a picture that signages are in place);
4. Re-configured workshops/training spaces to
address the need for physical/social distancing for
face to face training (attach picture of reconfigured
workshops/trainings spaces);
5. Physical Facilities Maintenance & Audit Plan
indicating regular disinfection and sanitation of all
workstations,workshops and laboratories,rooms,
buildings, tools,equipment, and facilities used during
training;
Compliant
Program Registration Requirements Remarks
Yes No
6.Availability of sanitizers and alcohol-based
dispensers;
7.Health personal protective equipment by all
employees and learners/scholars;
8.Availability of disinfection foothbath in buildings and
room entrances; and
9. Availability of no-touch/ digital
thermometer/thermal scanner at the main entrance.
Prepared by:
Noted by:
PEBBIE ANNE C. YANTO MARIGLO MACABUHAY-SESE, CESE
PO UTPRAS FOCAL Person Provincial Director
Date: Date: