MAGIC NS 2 Wired USB Controllers 04 Button on the side of the adapter 3.

Wired USB Controllers 04 Button on the side of the adapter 3. Pair your Xbox Series S/X controller with MAGIC-NS 2 again by pressing the button on the adapter and pair
button on your controller (LED indicator blinks quickly). The pairing process may take a few seconds. Please be
Connect your Bluetooth or wired USB controllers to your Switch, PC Windows, macOS, PS3, DualSense, DualShock 4, DualShock 3, Xbox Bluetooth Controller, Switch Pro, ASTRO Gaming C40 Press the button shortly to pair the To switch the modes, press and hold the
patient! The connection may be disconnected shortly and then connected again during the pairing process.
NEOGEO mini, NEOGEO Arcade Stick Pro, SEGA MEGA DRIVE mini, SEGA Genesis Mini, SEGA TR Controller PlayStation 4, PlayStation 4 SCUF Vantage 2 Controller, SEGA MEGA DRIVE and controllers and the adapter. The indicator button on the side of the adapter for 3-5
Please wait patiently until the LEDs stop blinking.
Astro City Mini, Raspberry Pi entertainment system. SEGA Genesis Mini USB Controller Pads, Logitech rumble gamepad F510 and F310, PS Classic blinks quickly. seconds.
4. The LED indicator becomes solid when connection is successful.
If you find any issues or have any difficulty operating the device,please reach out to us at Controller, Switch Taiko Drum, PS4 Taiko Drum.
[email protected] and we will be more than happy to help you out. Update to the latest The wireless controller that comes from your console will become a wired controller by simply 06 Wired Controllers Set UP
firmware at www.mayflash.com connecting a standard USB cable (with exception of Xbox 360 which requires an official Microsoft Switch PS3 PC Connect the adapter into any spare USB port on your game

MAGIC NS 2
wired Xbox 360 controller). For best results, it is recommended that you use original Switch console.
lncludes
Controllers, or genuine Xbox or PlayStation controllers and quality certified USB cables. 05 Bluetooth Controllers Set Up Connect the wired controller to the adapter. The wireless
Connect the adapter into any spare USB port on your controller that comes from your console will become a wired
USB Wireless Adapter Quick Start Guide
game console. controller by simply connecting a standard USB cable (with
01 USB A-Male exception of Xbox 360 which requires an official Microsoft
MAGIC-NS 2 USB Type C Cable
Switch Button
To switch the modes, press and hold the button on the
Manual wired Xbox 360 controller).
Connect the adapter to your game console. LED Indicator side of the adapter for 3-5 seconds. The LED indicator
System Compatibility Your controller is now ready to use.
blinks slowly.
02 USB A-Female
Turn on the Bluetooth controller, press the Button on the Modify the Vibration Intensity
Connect the wired game controllers to the USB A-Male
adapter. side of the adapter, and then press the pair button on Press and hold the Button R1/RB and R3 for 3-5 seconds until the controller keeps rumbling.
USB A-Female your Bluetooth controller. The LED indicator blinks (Please keep holding these two buttons until you finish the below whole process).
Switch PlayStation 3 Windows NEOGEO mini macOS 03 LED Indicators quickly.
To modify the vibration intensity, press the D-Pad “Up” or “Down”.
NEOGEO Arcade SEGA MEGA DRIVE Mini/ LED indicator becomes solid when connection is successful.
To quit the modification, release any button of R1/RB or R3 once you’ve got your preferred
PS3/Raspberry Pi/ Raspberry Pi/
System mode Switch Switch Pro Stick Pro/ macOS SEGA Genesis Mini/
PC (Dinput) PC (Xinput)
NEOGEO mini Note:
SEGA Astro City Mini
* If the Bluetooth pairing failed, please connect the Bluetooth controller to the adapter using a USB cable (not vibration intensity.
LED Indicator Red Purple Blue Green Yellow Cyan White included in the packaging, you can purchase it separately). As soon as the controller is identified by the system,
System Compatibility NEOGEO Arcade SEGA Genesis Mini SEGA Mega SEGA Astro Raspberry Pi There are 7 levels of the vibration intensity.
Stick Pro Drive Mini City Mini you can remove the USB cable and start to pair it again.
Switch, PS3, Windows, macOS, * LED Indicator blinks slowly: The Bluetooth is not connected yet. The default one is 100%.
System Settings
NEOGEO mini, Raspberry Pi, Controller Compatibility * LED Indicator blinks quickly: The Bluetooth is Pairing. * If you are having the issues connecting a Xbox Series S/X or Xbox Elite 2 controller to the MAGIC-NS 2, Switch Pro mode vibration levels:
NEOGEO Arcade Stick Pro, SEGA * LED Indicator becomes solid: The connection is successful. this is what we recommend: 0% 25% 37.5% 50% 62.5% 75% 100%
MEGA DRIVE mini, SEGA Genesis Bluetooth Controllers 1. Disable or turn off any Bluetooth device (like your Smart TV or Set Top Box etc.) within range of the
Mini, SEGA Astro City Mini
mayflash.com * Switch Pro mode (LED is purple): Go to System Setting Controller Controllers
and Sensors
Pro Controller Wired
Communication ON
PS3, PC Xinput vibration levels:
DualSense, DualShock 4, DualShock 3, Xbox Series X/S, Xbox One Bluetooth controllers, Xbox and Sensors > Turn on Pro Controller Wired Communication. controller.
50% 62.5% 75% 87.5% 100% 125% 150%
Elite Wireless Controller Series 2, Switch Pro, Switch Joy-Con, Wii Remote, Wii U Pro. * Bluetooth headset only works for Switch mode (LED is red). 2. Turn off your Xbox Series S/X controller and turn it on again. D-Pad “Down” 50% 62.5% 75% 87.5% 100% 125% 150% D-Pad “Up”
 Adjust the Dead Zone Update the Software The Touch Pad button on the PS4 Controller
PS5 DualSense L1 R1 Create OPTIONS L3 R3 LS RS POV L2 R2 PS Pressing Tpad
If you are having problems with the adapter, you can follow the below instructions to update. works as the Capture button of the
Press and hold the Button START and D-Pad Left or D-Pad Right. Once the LED on the adapter
Joy-Con or Switch Pro controller when you DualShock 4 L1 R1 SHARE OPTIONS L3 R3 LS RS POV L2 R2 PS Pressing Tpad
starts to blink, you may release the Button D-Pad Left or D-Pad Right, BUT keep holding the Download the software from http://www.mayflash.com/Support connect your PS4 controller to the Switch
Button START. and install it on your Windows system. DualShock 3 L1 R1 SELECT START L3 R3 LS RS POV L2 R2 PS SELECT + START
system by the adapter. Please see more
To increase or decrease the dead zone, press the D-Pad “Up” or “Down”. Double click on the updater and leave the updater window details about the other controllers on the Switch Pro L R L3 R3 LS RS POV ZL ZR HOME + or
As soon as you get the right dead zone value, you may release the Button START to quit the open on your screen. below “Controllers Buttons Table”. Joy-Con L R L3 R3 LS RS POV ZL ZR HOME + or
process. To disconnect the controller and the
Press and hold the button on the side of
Xbox Series X/S LB RB VIEW MENU L3 R3 LS RS POV LT RT HOME VIEW + MENU
There are 7 levels of the Dead Zone Value. The the adapter, and connect the USB from adapter, press the button on the side of
default one is Level 3. your adapter into any spare port on your the adapter. But if you want to disconnect Xbox One LB RB VIEW MENU L3 R3 LS RS POV LT RT HOME VIEW + MENU
PC. Wait for 3-5 seconds. the Xbox Elite 2 and the adapter, you need
Level 1 Level 2 Level 3 Level 4 Level 5 Level 6 Level 7 Xbox 360 LB RB BACK START L3 R3 LS RS POV LT RT HOME BACK + START
0% 2.5% 5% 7.5% 10% 12.5% 15% As soon as the adapter has been to press and hold the HOME button on
recognized, you may release the button. your controller to shut off the power. PC-Xinput X/Y Axis X/Y Circle POV Z+ Z- HOME
You can know the Dead Zone Level by the times of the LED
blinking during the adjusting process. For example, LED on Select “Update”. The adapter can remember up to 6 paired PC-Dinput X/Y Axis Z Axis Circle POV
the adapter blinks 3 times then stops when Dead Zone wireless controllers. But if your controller is
Do not disconnect the device until you are
D-Pad “Down” 0% 2.5% 5% 7.5% 10% 12.5% 15% D-Pad “Up”
Wii U Pro L R L3 R3 LS RS POV ZL ZR HOME +
Level is Level 3. a BLE device like Xbox Series X/S, then the
informed that the update is completed adapter can only remember one. Wii Classic Pro L R LS RS POV ZL ZR HOME +
Using Bluetooth Headset (Only for Switch mode / LED Red) successfully.
Wii mote + Nunchuck LS POV Z+ HOME +
Power on your Bluetooth headset to enter into the pairing mode.
Additional Functions
Press the pair button on the side of the adapter, LED starts to blink rapidly, wait for a few GENESIS mini Controller START POV POV

seconds. Only one Bluetooth controller is supported for one adapter.

MEGA DRIVE mini Controller MODE START POV POV
LED becomes solid when the connection is successful. A wired USB controller and a wireless Bluetooth controller can be connected at the same time, Beat the Beat the Beat the Beat the
but both of them have the same functions and can only play one game character. This device complies with part 15 of the FCC PS4 Taiko Drum L1 R1 SHARE OPTIONS
Drum Left Drum Right
POV
Drum Left Drum Right
PS
Note:
Switch mode (LED is Red) does not support 6-axis Rules. Operation is subject to the following Beat the Beat the Beat the Beat the
* To switch A-B,B-A,X-Y,Y-X, press and hold the
two conditions:(1) This device may not cause
Switch Taiko Drum L R
Drum Left Drum Right
POV
Drum Left Drum Right
HOME Capture
motion and vibration. button “START” and “A” for 3 seconds.To switch
If you need the 6-axis motion and vibration, harmful interference, and(2) this device must macOS L1 R1 SHARE OPTIONS L3 R3 LS RS POV L2 R2 PS Pressing Tpad
* A-A, B-B, X-X, Y-Y, press and hold the button
accept any interference received, including
please go to Switch Pro mode (LED is Purple). “START” and “B” for 3 seconds. (This function is NEOGEO mini SELECT START Joystick Joystick
interference that may cause undesired
optional. It depends on the different controllers.)
operation. NEOGEO Arcade Stick PRO
White Button Gray Button
SELECT START Stick White Button Gray Button
Options