Scribd
Upload
96 views7 pages

NK-301 LED Controller Data Sheet

The document describes an LED controller called the NK-301. It has dual RS485 interfaces, an OLED display, supports importing line data via USB, and manually switching bus lines and uplink/downlink. It provides RS485 communication to connect LED signs and is designed for convenient embedded installation with a wide voltage power supply of 24V DC.

Uploaded by

tulibroa.d
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
96 views7 pages

NK-301 LED Controller Data Sheet

The document describes an LED controller called the NK-301. It has dual RS485 interfaces, an OLED display, supports importing line data via USB, and manually switching bus lines and uplink/downlink. It provides RS485 communication to connect LED signs and is designed for convenient embedded installation with a wide voltage power supply of 24V DC.

Uploaded by

tulibroa.d
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

LED Controller NK-301

LED Controller
NK-301

Characteristics:
●Dual RS485 interface with protection
●OLED display device, low temperature resistant
●U disk import line data
●Manually switch bus lines
●Manually switch the uplink and downlink
●RS485 communication interface, connecting LED signs
●Convenient embedded installation
●Wide voltage power supply DC24V
1、Schematic diagram

1
LED Controller NK-301

The front view

The back view


2、Operating
2.1 Power on and off
Power on: Turn on the power and turn it on, automatically enter the

line selection interface or the state before power off

Standby: No operation after 30 seconds after power on, the backlight

will automatically go out and enter the lock screen state; press any

2
LED Controller NK-301
key to backlight, press and hold any key to unlock

Power off: Shut down when power is off

2.2 Import of data


a. Edit the line data of the “LED Controller” through the “ route

editor” software.

b. Export the configuration data to the USB flash drive;

c. Insert the USB flash drive into the USB port of the “LED

Controller”;

d, "LCD screen" of the " LED Controller " appears on the reading

interface, the data is read, enter the main interface

2.3 Non-operational information


Non-operational information is used to display special information

such as “Out Service”, “Under Repair”, and “Fuel filling”. Select

“Non-operational information” by pressing the UP Button ([︿] Button) or

the Down Button ([﹀] Button), press the F2 Button (Confirm Button) to

enter the non-operation information selection interface, and then press

3
LED Controller NK-301
the Up or Down Button to select the specified information. Press the F2

Button (Confirm Button) to send the data, and automatically return to the

non-operational information interface after the transmission is completed.

As shown below:

2.4 Line selection and uplink and downlink switching


Press the UP Button or the Down Button to select “Line

information”, press the F2 Button to enter the line information selection

interface, and then press the Up or Down Button to select the specified

line and uplink or For downlink information, press F2 Button to send

data, and automatically return to the uplink and downlink selection

interface after the transmission is completed. As shown below:

2.5 Data forwarding


a, The LED Controller RS485 receiving end, receiving the station;

4
LED Controller NK-301
b, The RS485 transmitter of the LED Controller and the RS485 bus of

the led sign;

The LED Controller can receive the line switching, uplink and downlink

switching or station data sent by the station, and automatically forward

to the led sign.

3、Technical indicators
Item Symbol Date Unit

Uplink communication interface Com1 RS485-1

Downlink communication interface Com2 RS485-2

Lines Lines 30-200 Item

Supply voltage Vin DC 24 V

Power P 1 W

Storage temperature Tstg -40～+85 ℃

Operating temperature Topr -40～+70 ℃


4、
The definition of external leads

5
LED Controller NK-301

Pin Definition Features

Pin1 GND GND

Pin2 VCC DC 24V

Pin3 SOS- External switch

Pin4 SOS+ External switch

Pin5 RS485-A The RS485-A of the host

Pin6 RS485-A The RS485-A of led sign

Pin7 RS485-B The RS485-b of the host

5 、 Pin8 RS485-B The RS485-B of led sign


Dim
ens ions

6
LED Controller NK-301

You might also like