Scribd
Upload
56 views

Control 1c

Uploaded by

pepe
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
56 views

Control 1c

Uploaded by

pepe
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ProfessionalSeries

KeyFeatures:
b Sensitivity: 86 dB SPL, 1 W, 1 m
(3.3 ft.1
b High power handling (150 W pink
noise) with integral protection
circuit network
F Molded enclosure
F Components:
135 mm (5% in) low frequency
loudspeaker
19 mm (% in) polycarbonate
dome tweeter
F Optional mounting hardware

The Control 1C’” is a high perfor- Specifications:


mance personal monitor loudspeaker SYSTFI11
that offers many advantages of JBL’s Freouenc\- Kesnonse ( 2 ?7dB): 120 Hz to 20 kHz
celebrated Control 1. This low cost Power Capaclt~ * 150 v[
version retains the excellent electro- Sensltlwt>~ 86 dB SPL, 1 vi’, 1 m (3 3 ft)
acoustical performance of the Control 1 Dlrectlvlt\ F&xx 10) 28
The major differences are its non-
Directivity Index (DI): 4. j
shielded magnetic structure and
No~mnd Impedance 4 ohms
unfinished polypropylene structural
Cro\w\er Frequenq 6 kHz
foam enclosure.
PolarIt! Posltl\e voltage to + termmal caube5 outaard low
Incorporating a 13 j mm (5% in) low freuuellc~ cone motion
frequency transducer, a 19 mm (% in) GENER4L:
high frequency driver, and a sophis- Enclosure Material: Polypropylene structural foam
ticated dividing network, the Control Finish: Llnpainted
1C provides full range, low distortion Dimensions: 235 mm H x 159 mm VI’x 113 mm D
reproduction for a variety of 19’/, in H x 6% in vi! s 5% in II)
applications. Net Wqght (each) 1 8 kg (4 lb)
Shqqxng W&t (pm) 4 6 kg (10 Ib)
The Control 1C is ideal for general
ACCESSOKIES
sound contracting specification for
MTC-1 Adapter: This clamp-on unit allows the Control IC to be mounted
distributed systems requiring wide on photographic tripods, mike stands (with the MTC-4
bandwidth in the least amount of or XITC-6) and other manufacturers’ wall or clamp
space. The Control 1C is also an mount systems. Pair packed.
excellent choice for personal music MTC-2 + VW Ceiling Mount Svstcm: This unit allows the Control 1C to be mounted to an!
studios and other applications such as rigid surface while permitting the speaker to be aimed
in almost any direction. Optional colors.
foreground music in restaurants and
MTC-3 + Clamp Mount System This unit allows the Control 1C to be clamped onto a -
as added coverage in discos. variety of objects such as shelves, poles or table tops
while permitting ;Lrange of adjustments.
Well balanced sound and excep- Optional colors.
tional power handling make the
MTC-1 (European) Microphone This unit allows the Control 1C to be mounted on :I
Control 1C ideal for any installation %ITC-6 (Japanese) Stand Adapter: microphone stand with European CJapnnese) standard
requiring professional control threads when used in conjunction with an MTC-1.
monitor performance from a I\lTC-7 American hlicrophone This unit allows the Control 1C to be mounted on :I
compact source. Stand Adapter: microphone stand with American standard threads.
MTC-8 Mall ,Ilount Bracket: Low cust, fixed angle wall mount bracket. Optional
Control 1C mounting versatility is colors.
enhanced by a complete line of
installation accessories.
b Control 1C’“’
MiniatureLoudspeakerSystem

Wall mounting brackets are available for permanent Horizontal and Vertical
attachment to any rigid surface. A clamp mounting system Beamwidth (- 6 dB) vs. Frequency
is available for semi-permanent attachment to a wide
variety of structures.
Additionally, mounting adaptors are available to inter-
face the Control 1C system to other mounting systems now
in use, as well as photographic tripods or microphone
stands.

ArchitecturalSpecifications:
The loudspeaker system shall consist of a 135 mm (iI/+ in) low-
frequency transducer, 19 mm (% in) dome high-frequency transducer,
and frequency dividing network installed in a ported enclosure. The
magnetic assemblies shall use ferrite magnets. The low frequent)
voice coil shall be 25 mm (1 in) in diameter. The frequency dividing Directivity vs. Frequency
network shall have a crossover frequency of 6 kHz and shall utilize
polypropylene bypass capacitors to reduce hysteresis effects on
the signal.
Performance specifications of a tg%cal production unit shall be as
follows: measured sensitivity (SPI. at 1 m [3.3 ft] with 2.0 V input,
swept from 500 Hz to 2.5 kHz) shall he at least 86 dB SPL. Frequent!
response shall be within plus or minus 3 dB from 120 Hz to 20 kHz.
Usable frequency- response shall extend downward to 70 Hz. Nominal
impedance shall be 4 ohms. Rated power capacity shall be at least 150
watts continuous pink noise, based on a test signal of IEC filtered
random noise, with a peak-to-average ratio of 6 dB, two hours
duration.
The entire enclosure shall be manufactured of molded polypro-
p!Tlene structural foam. Optional mounting brackets shall be available
for positioning of the loudspeaker at various angles for both tempo-
rary and permanent installations. Overall dimensions shall be no
greater than 235 mm (9’/, in) by 159 mm (6% in) by 113 mm (5% in)
Distortion vs. Frequency 10 W
deep. The enclosure shall have integral metal grille and rubber end
protectors. Distortion Raised 20 dB
The system shall be the JBL Model Control IC. 40

Frequency Response at 1 W, 1 meter; Impedance

JBL Professional
8500 Balboa Boulevard, PO. Box 2200
Northridge, California 91329 USA
IO/94 10M
H A Harman lnternatlonal Company 981-00007

You might also like