Versatile 2kg Rotary Hammers Rotary Hammers Satisfy Professional's Needs
Adapted for
HR2230 22mm (7/8") HR2460/F 24mm (7/8") SDS-PLUS bits
HR2470/F/T/FT 24mm (7/8") "Combination Hammers"
Comparison of Drilling Efficiency
Note: 1. It may differ under some conditions.
2. Numbers in the charts below are relative values when the capacities of Makita "HR2450" are indexed at 100.
Test conditions: Drilled in concrete with compressive strength of 40N/mm2 .
Bit diameter: 10.5mm Bit diameter: 12.5mm Bit diameter: 16.5mm
Makita HR2470 110 Makita HR2470 100 Makita HR2470 105
Competitor "B" 105 Competitor "B" 105 Competitor "B" 105
Competitor "H" 100 Competitor "H" 95 Competitor "H" 110
Makita HR2450 100 Makita HR2450 100 Makita HR2450 100
0 90 100 110 120 0 90 100 110 120 0 90 100 110 120
slow fast slow fast slow fast
Rotary Hammer HR2230, HR2460/F, HR2470/F/T/FT
DRASTICALLY
325
Double Insulation HR2230 HR2460/F HR2470/F HR2470T/FT
Continuous rating Input 710W 780W 780W 780W
Variable Speed Capacity
Concrete : (with diamond core bit) 65mm (2-9/16") 65mm (2-9/16") 65mm (2-9/16") 65mm (2-9/16")
Reversing Concrete : (with T.C.T. bit) 22mm (7/8") 24mm (15/16") 24mm (15/16") 24mm (15/16")
ENHANCED
Steel : 13mm (1/2") 13mm (1/2") 13mm (1/2") 13mm (1/2")
Torque Limiter Wood : 32mm (1-1/4") 32mm (1-1/4") 32mm (1-1/4") 32mm (1-1/4")
Impacts per minute 0-4,050ipm 0-4,500ipm 0-4,500ipm 0-4,500ipm
Dust Collecting No load speed 0-1,050rpm 0-1,100rpm 0-1,100rpm 0-1,100rpm
Adapted for Dimensions 357 x 84 x 214mm 362 x 84 x 214mm 370 x 84 x 214mm 394 x 84 x 214mm
SDS-PLUS bits 14"x 3-5/16"x 8-3/8" 14-1/4"x 3-5/16"x 8-3/8" 14-1/2"x 3-5/16"x 8-3/8" 15-1/2"x 3-5/16"x 8-3/8"
DURABILITY
Carrying Case Net weight 2.4kg (5.4lbs) 2.5kg (5.6lbs) 2.6kg (5.9lbs) 2.8kg (6.3lbs)
Power supply cord 4.0m (13.1ft) 4.0m (13.1ft) 4.0m (13.1ft) 4.0m (13.1ft)
Built-in Job Light
(HR2460F, HR2470F/FT only) Standard Equipment Quick Change Drill Chuck (HR2470T/FT only), Depth Gauge, Side Grip (Tool does not come with bit.)
Items of standard equipment and specifications may differ by country or area.
Makita Corporation
3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan Hi-Spec 2kg Rotary Hammers
PRINTED IN JAPAN Z15211-2 2007-07
High
24mm Combination Hammers
3 MODE
Durability
HR2470/ F
780 2.6 LED Job Light
W kg (HR2470F only)
Quick Change Chuck
Inner Housing
Seal Ring
HR2470T/ FT LED Job Light
780 2.8
(HR2470FT only)
W kg
Armature with Quick Change Drill Chuck
• Added Durability to Impact Bolt Rotation Hammering with Rotation Hammering
• Large Seal Ring eliminates grease leakage Chisel rotates full 360
degrees with 40
from matching surface between Inner Housing and Gear Housing. Photo : HR2460F different locking
positions.
• Varnish on armature protects from dust and wire-breakage.
Rotation Reversing System Using Brush Holder Unit
Features the following advantages:
• Protects Carbon Brush from foreign dusts and debris.
• Life of Carbon Brush is 2.7 times long as 24mm Rotary Hammers
2 MODE
the existing models.
• Same speed and torque even in reverse rotation
• Saves time and labor for repair thanks
to simplified wiring.
HR2460/ F
780 2.5 LED Job Light
W kg (HR2460F only)
Hammering
Reinforcing bar
Impact Bolt Striker Air
1
Rubberized Grip
Provides more control
and comfort. 22mm Rotary Hammer
2 MODE
Idling
LED Job Light
Striker Air
2 Illuminates the working spot.
(HR2460F, HR2470F/FT only)
HR2230
O-Ring catches Striker
One-Touch Sliding Chuck Torque Limiter No Hammering when Idling 1 Lock-On Button Bumper
for Easy Bit Changes :: When drill bit hits against Ensures machine's long life. for Continuous Operation Protects the surface of workpiece
reinforcements,
2 Variable Speed
and machine. 710 2.4
Torque Limiter operates to stop. W kg
Tool does not come with bit.
