XTD-200K Rev 7

200 Watt Ku-Band
Antenna Mount
High Power Amplifier
The XTD-200K is a compact, antenna mountable, traveling

FEATURES wave tube amplifier designed for low cost installation and
• Rugged 34 lb. antenna long life. Intended for outdoor operation, the self contained
mount package XTD-200K eliminates the need for a separate amplifier shel-
ter. In addition, the distance between the amplifier and the
• Extended frequency band antenna feed horn can be short, thus eliminating long wave-
available guide runs and their associated RF losses.
RF filters, cooling, and monitor & control (M&C) systems are
• Simple low cost all self contained within the package. A high frequency res-
installation onant conversion power supply is used that accepts a wide
range of prime power (100 to 260 VAC). A remote external
• RS-232/422/485 M&C controller is available to operate the HPA from a user selected
location. Depending upon user requirements, these high
interface
power amplifiers can be configured for single thread, redun-
• 1:1, 1:2, 1:N redundancy dant, or phase combined configurations.
Mounting brackets are supplied to mount the high power
amplifier to most popular antennas.
TECHNOLOGY
3550 Bassett Street • Santa Clara • CA 95054 • Tel: (408) 213-3000 • Fax: (408) 213-3001
www.xicomtech.com • email [email protected]
PERFORMANCE SPECIFICATION
Parameters XTD-200K
FREQUENCY RANGE standard, 13.75 to 14.5 GHz
extended frequency coverage available (12.75 to 14.5 GHz)
OUTPUT POWER
Traveling Wave Tube 200 Watts
Rated Power @ Amplifier Flange 175 Watts
GAIN
Large Signal (minimum) 40 dB (70 dB w/optional IPA)
Small Signal (minimum) 46 dB (75 dB w/optional IPA)
Gain Flatness (maximum) ± 1 dB
Maximum SSG Variation Over
Any Narrow Band 1.0 dB per 80 MHz
Full Band 2.5 dB/750 MHz
Slope (maximum) ± 0.04 dB/MHz
Stability, 24 hr. (maximum) ± 0.25 dB
Stability, Temperature (maximum) ± 2.0 dB over temperature range at any frequency
INTERMODULATION (maximum) -18 dBc

with two equal carriers @ 4 dB total output backoff from rated power
HARMONIC OUTPUT (maximum) -60 dBc
AM/PM Conversion (maximum) 2.5 deg/dB at 6 dB below rated output power
NOISE POWER (maximum)
Transmit Band -70 dBW/4 kHz
Receive Band -150 dBW/4 kHz

10.95 to 12.75 GHz
GROUP DELAY (maximum)
Bandwidth Any 80 MHz
Linear 0.01 nS/MHz
Parabolic 0.005 nS/MHz2
Ripple 0.5 nS/Pk-Pk
RESIDUAL AM NOISE (maximum) -50 dBc to 10 kHz

-20 (1.5 + logf ) dBc 10 to 500 kHz
-85 dBc above 500 kHz
PHASE NOISE (maximum) 12 dB below IESS phase noise profile

AC fundamental -50 dBc, Sum of all spurs -47 dBc
VSWR
Input (maximum) 1.3:1
Output (maximum) 2.2:1
XTD-200K
TECHNOLOGY
BLOCK DIAGRAM
OUTLINE DRAWING
XTD-200K
TECHNOLOGY
PRIME POWER Headquarters
100-260 VAC
Comtech Xicom Technology, Inc.
47 to 63 Hz, Single Phase 3550 Bassett Street
850 VA Typical Santa Clara, CA 95054
0.95 Minimum Prime Power Factor
USA
Phone: +1-408-213-3000
ENVIRONMENT Fax: +1-408-213-3001
Nonoperating Temperature Range -50°C to +70°C
Operating Temperature Range -40°C to +60°C email: [email protected]
(-40°C to +50°C with reverse air flow option) Web: www.xicomtech.com
Humidity Up to 100% Condensing
Altitude 10,000 feet MSL maximum
(2°C/1000 feet derating) ..........
Shock and Vibration Normal Transportation
Cooling Forced Air
Europe Sales Office
Comtech Xicom Technology Europe, LTD
INTERFACE 4 Portland Business Center
Type Function Manor House Lane
Local Control Prime Power ON/OFF Local/Remote
Datchet
Power Supply ON/OFF HV ON/OFF
Berkshire SL3 9EG
Local Status Tri-Color LED
United Kingdom
Fault Red Standby: Continuous Amber
Phone: +011 44 (0) 1753 549 999
HV ON: Green FTD: Flashing Amber
Fax: +011 44 (0) 1753 549 997
Remote Control HV ON/OFF RF Inhibit (HV OFF) Heater Standby
RF Attenuation Fault Reset
(w/preamp) email: [email protected]
Remote Status HV ON Heater/Beam Hours Filament Time Delay Web: www.xicomtech.com
RF Output Power Fault Identification Helix Current
Reflected Power TWT Temperature Helix Voltage
..........
Form C Dry Summary Fault
Contact Closure
RF Monitor Port -37 dB Coupling Value (Approx.)
Asia Sales Office
Comtech Xicom Technology
OPTIONS 150 Cecil Street
#08-02
• Remote External Controller
• Extended Frequency Coverage Singapore 069543
• 1:1, 1:2, 1:N Redundancy
• Variable Phase Combined Phone: +011 65 6325 1953
• Integrated Linearizer
• Variable Gain IPA Fax: +011 65 6325 1950
• Block Upconverter
email: [email protected]
Web: www.xicomtech.com
Document # XTD-200K Rev 7, 10/18/2011

© 2011
Note: Technical specifications are subject to change without notice. Please
TECHNOLOGY
contact Xicom Technology before using this information for system design.

XTD-200K Rev 7

Uploaded by

Copyright:

Available Formats

XTD-200K Rev 7

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

XTD-200K Rev 7

Uploaded by

Copyright:

Available Formats

200 Watt Ku-Band

The XTD-200K is a compact, antenna mountable, traveling

Traveling Wave Tube 200 Watts

Rated Power @ Amplifier Flange 175 Watts

Large Signal (minimum) 40 dB (70 dB w/optional IPA)

Small Signal (minimum) 46 dB (75 dB w/optional IPA)

Gain Flatness (maximum) ± 1 dB

Maximum SSG Variation Over

Any Narrow Band 1.0 dB per 80 MHz

Full Band 2.5 dB/750 MHz

Slope (maximum) ± 0.04 dB/MHz

Stability, 24 hr. (maximum) ± 0.25 dB

Stability, Temperature (maximum) ± 2.0 dB over temperature range at any frequency

INTERMODULATION (maximum) -18 dBc

HARMONIC OUTPUT (maximum) -60 dBc

AM/PM Conversion (maximum) 2.5 deg/dB at 6 dB below rated output power

NOISE POWER (maximum)

Transmit Band -70 dBW/4 kHz

Receive Band -150 dBW/4 kHz

GROUP DELAY (maximum)

Bandwidth Any 80 MHz

Linear 0.01 nS/MHz

Parabolic 0.005 nS/MHz2

Ripple 0.5 nS/Pk-Pk

RESIDUAL AM NOISE (maximum) -50 dBc to 10 kHz

PHASE NOISE (maximum) 12 dB below IESS phase noise profile

Input (maximum) 1.3:1

Output (maximum) 2.2:1

Document # XTD-200K Rev 7, 10/18/2011

You might also like