S2 A Proposed One-Storey Residential Building: at Intersection

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

200 W = 1.20m (max) 200 200 W = 1.

20m (max) 200


CHB "t"

CHB WALL (INTERIOR)

CHB HOR. REINF. (SEE


SCHED. OF REINF.)
2 - 12MM Ø TOP 2 - 12MM Ø TOP
CHB VERT. REINF. (SEE & BOTTOM BARS & BOTTOM BARS
SCHED. OF REINF.)
WINDOW 10MM Ø VERTICAL BARS
DOWEL BARS TO MATCH OPENING SPACED @ 400MM O.C.
HORIZONTAL REINFORCEMENT CHB WALL CHB WALL SLAB ON GRADE

100
400
ZOCALLO WALL

100
DOOR
R.C. COLUMN AS PER

VARIES
OPENING GRAVEL BED
SCHEDULE

DOWEL LENGTH
VARIES
1-16MM Ø VERT. BARS CHB WALL (EXTERIOR) 150MM THICK
200

EXTERIOR CHB WALL


16MM Ø VERT. 16MM Ø VERT.
BARS BARS
CHB "t"

CHB "t"

200
100 100 FOOTING TIE BEAM

DOWEL BARS TO MATCH


HORIZONTAL REINFORCEMENT

400 400
TYPICAL DOOR OPENING TYPICAL WINDOW OPENING TYPICAL WALL TO TIE BEAM DETAILS
WALL REINFORCING AT R.C. COLUMN WITH LINTEL BEAM WITH LINTEL BEAM
INTERSECTION WITH INTERIOR WALL

Ø12x1000mm LONG DIAGONALS AT


MID-DEPTH OF SLAB AT EACH CORNER.

1-Ø12 TOP &

400
BOT. BARS

RET. WALL/CHB WALL

40mm. CLEAR 75 mm
SEE SPOT DETAILS A
MAXIMUM POLYURETHANE SEALANT
BARS SHALL
BE ADEQUATELY
SLAB REINF.
DEVELOPED AND IN TWO WAY FLR. LVL.

400
BENT WITHIN THE SLAB EXTEND
WALL BOUNDARY BARS UP TO

250
ELEMENTS BEAM SUPPORT

ADDITIONAL TRIMMER BARS(SHOWN AS


NOTE: DOTTED LINES), AT SIDES OF OPENING
SEE SHEARWALL OMIT TRIMMER BARS WHERE EQUAL TO THE NUMBER OF BARS 400
SCHEDULE OPENING IS FRAMED BY BEAMS. TERMINATED BY THE OPENING.

NOTES: COMPACTED GRAVEL SUBGRADE COMPACTED


BEDDING (TYP.) TO 95% OF MAXIMUM
1. PROVIDE THESE ADDITIONAL BARS FOR ALL OPENINGS DRY DENSITY @ OPTIMUM
PLUS BARS (SHOWN AS DOTTED LINES) PARALLEL TO SIDE OF OPENING VAPOR BARRIER
WHEN REQUIRED MOISTURE CONTENT (MAX.
EQUAL TO THE NUMBER OF INTERRUPTED BARS BY THE OPENING. DEPTH OF COMPRESSED
FILL = (200mm PER LAYER).
2. SEE ARCHITECTURAL & MECHANICAL PLANS FOR SLAB
AT INTERSECTION OPENING LOCATION.
VERIFY HEIGHT

3. THE ADDITIONAL BARS ARE REQUIRED TO EXTEND FROM SUPPORT


TO SUPPORT ON ALL FOUR SIDES OF A TWO-WAY SLAB.
THE PRIMARY REINFORCING BARS IS REQUIRED TO EXTEND FROM SLAB-ON-GRADE EXPANSION
SUPPORT TO SUPPORT ON ONE-WAY SLABS.
JOINT DETAIL
SLAB OPENING DETAIL

SEE SHEARWALL
SCHEDULE
BARS SHALL
BE ADEQUATELY SAW-CUT GROOVE 8MM
DEVELOPED AND WIDE TO BE FILLED WITH
BENT WITHIN THE POLYURETHANE SEALANT
WALL BOUNDARY ZOCALLO WALL SAME THICKNESS SAW-CUT GROOVE 8MM WIDE
ELEMENTS AND REINFORCEMENT AS MASONRY 65MM DEEP TO BE FILLED WITH SLAB REINF.
WALL POLYURETHANE SEALANT
AT CORNER FLR. LVL.
20MM MIN.

SLAB
DOWEL TO MATCH SLAB REINF.

"t"
CONC. COVER
DIAMETER
DOWELS

CHB VERT. BARS


30 BAR

300 FLR. LVL.


20MM MIN.

SLAB
DEV'T HOOK FOR SHEAR RESISTING HORIZONTAL

100
(TYP.) CONSTRUCTION JOINT

"t"
CONC. COVER

100
BAR INTO THE SHEARWALLS CONFINEMENT ZONES
200

FIN. FLR. LVL.


250

COMPACTED GRAVEL SUBGRADE COMPACTED


BEDDING (TYP.) TO 95% OF MAXIMUM
VAPOR BARRIER DRY DENSITY @ OPTIMUM
COMPACTED GRAVEL SUBGRADE COMPACTED MOISTURE CONTENT (MAX.
BEDDING (TYP.) TO 95% OF MAXIMUM WHEN REQUIRED
6-Ø10 BARS (AS SHOWN) DEPTH OF COMPRESSED
VAPOR BARRIER DRY DENSITY @ OPTIMUM FILL = (200mm PER LAYER).
WHEN REQUIRED MOISTURE CONTENT (MAX.
Ø10 BOT. BARS @ 300 O.C. DEPTH OF COMPRESSED
400 FILL = (200mm PER LAYER).

SLAB-ON-GRADE CONSTRUCTION
INTERIOR CHB WALL ELEVATION SLAB-ON-GRADE CONTRACTION JOINT DETAIL
WF2 - Wall Footing 2
JOINT DETAIL

CIVIL ENGINEER PROJECT TITLE: APPROVED BY: SHEET NO.:

ARIEL JOSEPH L. PLOMEDA


A PROPOSED ONE-STOREY RESIDENTIAL BUILDING &
PRC #: DATE: JOY L. PLOMEDA S2
TIN:
LOCATION: DAMO-ONG, JANIUAY, ILOILO CITY OWNER
PTR #: PLACE:

You might also like