Scribd
Upload
40 views6 pages

1M Check

This document contains the results of a steel code checking analysis for a railing with a length of 1 meter. It provides details on the load combinations and factors considered, section properties, material properties, moment magnification factors, and factored forces and moments.

Uploaded by

Hsunami
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
40 views6 pages

1M Check

This document contains the results of a steel code checking analysis for a railing with a length of 1 meter. It provides details on the load combinations and factors considered, section properties, material properties, moment magnification factors, and factored forces and moments.

Uploaded by

Hsunami
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Client
Author User File Name RAILING 1.0M LENGTH R1.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2019
==========================================================================================

+============================================================+
| MIDAS(Modeling, Integrated Design & Analysis Software) |
| midas Gen - Design & checking system for windows |
+============================================================+
| Steel Member Applicable Code Checking |
| Based On Eurocode3:05, Eurocode3, AISC(15th)-LRFD16, |
| AISC(15th)-ASD16, AISC(14th)-LRFD10, |
| AISC(14th)-ASD10, AISC(13th)-LRFD05, |
| AISC(13th)-ASD05, AISC-LRFD2K, AISC-LRFD93, |
| AISC-ASD89, CSA-S16-01, BS5950-90 |
| |
| |
| |
| |
| (c)SINCE 1989 |
+============================================================+
| MIDAS Information Technology Co.,Ltd. (MIDAS IT) |
| MIDAS IT Design Development Team |
+============================================================+
| HomePage : www.MidasUser.com |
+============================================================+
| Gen 2019 |
+============================================================+

*. DEFINITION OF LOAD COMBINATIONS WITH SCALING UP FACTORS.


--------------------------------------------------------------------------------------
LCB C Loadcase Name(Factor) + Loadcase Name(Factor) + Loadcase Name(Factor)
--------------------------------------------------------------------------------------
1 1 SW( 1.400)
2 1 SW( 1.200) + LL( 1.600)
3 2 SW( 1.000)
4 2 SW( 1.000) + LL( 1.000)
--------------------------------------------------------------------------------------

Modeling, Integrated Design & Analysis Software Print Date/Time : 03/28/2024 09:37
http://www.MidasUser.com
Gen 2019 -1/6-
midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Client
Author User File Name RAILING 1.0M LENGTH R1.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2019
==========================================================================================

*. PROJECT :
*. MEMBER NO = 99, ELEMENT TYPE = Beam
*. LOADCOMB NO = 2, MATERIAL NO = 1, SECTION NO = 1
*. UNIT SYSTEM : kN, m

*. SECTION PROPERTIES : Designation = PIPE50X3.0MM


Shape = P - Section. (Built-up)
Outer Dia. = 0.050, Wall Thick = 0.003

Area = 4.42965e-004, Asy = 2.21482e-004, Asz = 2.21482e-004


Ybar = 2.50000e-002, Zbar = 2.50000e-002, Qyb = 5.54500e-004, Qzb = 5.54500e-004
Syy = 4.91248e-006, Szz = 4.91248e-006, Zyy = 6.63600e-006, Zzz = 6.63600e-006
Iyy = 1.22812e-007, Izz = 1.22812e-007, Iyz = 0.00000e+000
ry = 1.66508e-002, rz = 1.66508e-002
J = 2.45624e-007, Cwp = 1.00000e+028

*. DESIGN PARAMETERS FOR STRENGTH EVALUATION :


Ly = 3.00000e-001, Lz = 5.00000e-001, Lu = 5.00000e-001
Ky = 1.00000e+000, Kz = 1.00000e+000

*. MATERIAL PROPERTIES :
Fy = 2.05000e+005, Es = 2.00000e+008, MATERIAL NAME = A304

======================================================================================
[[[*]]] COMPUTE MOMENT MAGNIFICATION FACTORS AND MAGNIFIED MOMENTS.
======================================================================================

( ). Factored force/moments caused by unit load case.


*.Load combination ID = 2
-------------------------------------------------------------------------------
Load Case Pa Myi Myj Mzi Mzj
-------------------------------------------------------------------------------
DL -0.11 -1.63e-004 6.00e-005 0.00 0.00
LL 0.00 0.00 0.00 -1.11 9.84e-003
DL+LL -0.11 -1.63e-004 6.00e-005 -1.11 9.84e-003
OTHER CASES 0.00 0.00 0.00 0.00 0.00
-------------------------------------------------------------------------------
TOTAL -0.11 -1.63e-004 6.00e-005 -1.11 9.84e-003
-------------------------------------------------------------------------------
*.Member end moments caused by gravity load(DL+LL).
My1G = 6.00e-005, My2G = 1.63e-004
Mz1G = 9.84e-003, Mz2G = 1.11

( ). Compute coefficient assuming no lateral translation of the frame (Cmy, Cmz)


[ AISC(15th) Specification C2.1.1b. (C2-4) ]
-. Cmy = 0.850 (User defined or default value)
-. Cmz = 0.850 (User defined or default value)

Modeling, Integrated Design & Analysis Software Print Date/Time : 03/28/2024 09:37
http://www.MidasUser.com
Gen 2019 -2/6-
midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Client
Author User File Name RAILING 1.0M LENGTH R1.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2019
==========================================================================================

( ). Compute moment magnification factors(B1y,B1z).


-. Pu = Pu(DL+LL) + Pu(WL(EL)) = 0.11 kN.
-. About major(Local-y) axis.
SLENy = Ky*Ly/ry = 18.02
Lambda = (SLENy/pi)*SQRT(Fy/Es) = 0.1836
Pey = (Area*Fy)/Lambda^2 = 2693.57 kN.
B1y = Cmy / (1-Pu/Pey) = 0.85
B1y < 1.0 ---> B1y = 1.00
-. About minor(Local-z) axis.
SLENz = Kz*Lz/rz = 30.03
Lambda = (SLENz/pi)*SQRT(Fy/Es) = 0.3060
Pez = (Area*Fy)/Lambda^2 = 969.68 kN.
B1z = Cmz / (1-Pu/Pez) = 0.85
B1z < 1.0 ---> B1z = 1.00

( ). Magnification factors for sidesway moments(B2y,B2z).


-. B2y = 1.00 (Default value)
-. B2z = 1.00 (Default value)

( ). Given factored axial forces and moments at <I>.


----------------------------------------------------------------
Load Case Pa My Mz
----------------------------------------------------------------
DL -0.11 -1.63e-004 0.00
LL 0.00 0.00 -1.11
DL+LL -0.11 -1.63e-004 -1.11
OTHER CASES 0.00 0.00 0.00
----------------------------------------------------------------
TOTAL -0.11 -1.63e-004 -1.11
----------------------------------------------------------------

( ). Compute magnified moments.


-. Muy = B1y*My(DL+LL) + B2y*My(OTHERS) = -1.63e-004 kN-m.
-. Muz = B1z*Mz(DL+LL) + B2z*Mz(OTHERS) = -1.11 kN-m.

======================================================================================
[[[*]]] CHECK AXIAL STRENGTH.
======================================================================================

( ). Check slenderness ratio of axial compression member (KL/r).


[ AISC(15th) Specification E2. ]
-. KL/r = 30.0 < 200.0 ---> O.K.

( ). Check diameter-thickness ratio of pipe (DTR).


[ AISC(15th) Specification B4. <Table B4.1a> ]
-. Lambda_r = 0.11*Es/Fy = 107.32
-. DTR = D/tw = 16.67 < Lambda_r ---> NON-SLENDER SECTION !

Modeling, Integrated Design & Analysis Software Print Date/Time : 03/28/2024 09:37
http://www.MidasUser.com
Gen 2019 -3/6-
midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Client
Author User File Name RAILING 1.0M LENGTH R1.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2019
==========================================================================================

( ). Calculate Flexural Buckling Stress (Fcr1).


[AISC(15th) Specification E3]
pi^2 * E
-. Fe = ----------- = 2189078.2562 KPa.
(Lc/r)^2
-. Lc/r = 30.029
-. 4.71 * SQRT[Es/Fy] = 147.116
-. Fy/Fe = 0.0936
-. When Lc/r < 4.71 * SQRT[Es/Fy] or Fy/Fe < 2.25
-. Fcr1 = (0.658)^(Fy/Fe) * Fy = 197120.2821 KPa.

( ). Torsional and flexural-torsional buckling stress (Fcr2)


[ AISC(15th) Specification E4.(a) (E4-2) ]
-. Doubly symmetric shape
-. Gs = 7.7221e+007 KPa.
-. Kx = 1.00 (Conservatively taken value).
-. L = 0.500 m.
-. Fe = [Pi^2*E*Cwp/(Lcx)^2 + Gs*J]/(Iyy+Izz) = 3.2145e+044 KPa.

-. Lc/r = 30.029
-. 4.71 * SQRT[Es/Fy] = 147.116
-. Fy/Fe = 0.0000

-. When Lc/r < 4.71 * SQRT[Es/Fy] or Fy/Fe < 2.25


-. Fcr2 = (0.658)^(Fy/Fe) * Fy = 205000.0000 KPa.

( ). Calculate axial compressive strength (phiPn).


[ AISC(15th) Specification E1. ]
-. Fcr = 197120.2821 KPa.
-. Resistance factor for compression : phi = 0.90
-. phiPn = phi*Area*Fcr = 78.59 kN.

( ). Check ratio of axial strength (Pu/phiPn).


Pu 0.11
-. ------- = --------------- = 0.001 < 1.000 ---> O.K.
phiPn 78.59

======================================================================================
[[[*]]] CHECK FLEXURAL STRENGTH OF CIRCULAR TUBES.
======================================================================================

( ). Calculate limiting width-thickness ratio of pipe for flexure.


[ AISC(15th) Specification B4. <Table B4.1b> ]
-. Lambda_p = 0.07*Es/Fy = 68.29
-. Lambda_r = 0.31*Es/Fy = 302.44

( ). Check width-thickness ratio of pipe (DTR).


[ AISC(15th) Specification B4. <Table B4.1b> ]
-. DTR = 16.67 < Lambda_p ---> COMPACT.

Modeling, Integrated Design & Analysis Software Print Date/Time : 03/28/2024 09:37
http://www.MidasUser.com
Gen 2019 -4/6-
midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Client
Author User File Name RAILING 1.0M LENGTH R1.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2019
==========================================================================================

--------------------------------------------------------------------------
[*] Check Yielding (Y).
--------------------------------------------------------------------------

( ). Calculate nominal flexural strength for Yielding (Y).


[ AISC(15th) Specification F8.1 (F8-1) ]
-. Mn = Mp = Fy*Z = 1.36 kN-m.

--------------------------------------------------------------------------
[*] Check Local Buckling (LB).
--------------------------------------------------------------------------

( ). Calculate nominal flexural strength for Local buckling (LB).


[ AISC(15th) Specification F8.2 (a) ]
-. For compact sections, local buckling is not applied.

( ). Compute flexural strength (phiMny, phiMnz).


[ AISC(15th) Specification F8. ]
-. Mn = Mn1 = 1.36 kN-m.
-. Resistance factor for flexure : phi = 0.90
-. phiMny, phiMnz = phi*Mn = 1.22 kN-m.

( ). Check ratio of flexural strength.


Muy 1.63e-004
-. -------- = --------------- =1.335e-004 < 1.000 ---> O.K.
phiMny 1.22
Muz 1.11
-. -------- = --------------- = 0.905 < 1.000 ---> O.K.
phiMnz 1.22

======================================================================================
[[[*]]] CHECK INTERACTION OF COMBINED STRENGTH.
======================================================================================

( ). Check interaction ratio of combined strength.


[ AISC(15th) Specification H1.1(b) ]
-. Pr/Pc < 0.20 ---> Formula(H1-1b)
Pr [ | Mry |^2 | Mrz |^2 ]
-. ComRat = ------ + SQRT [ |-----| + |-----| ]
2*Pc [ | Mcy | | Mcz | ]
=6.829e-004 + SQRT[1.335e-004^2 + 0.905^2 ]
= 0.905 < 1.000 ---> O.K.

======================================================================================
[[[*]]] CHECK SHEAR STRENGTH.
======================================================================================

Modeling, Integrated Design & Analysis Software Print Date/Time : 03/28/2024 09:37
http://www.MidasUser.com
Gen 2019 -5/6-
midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Client
Author User File Name RAILING 1.0M LENGTH R1.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2019
==========================================================================================

( ). Calculate shear strength in local-y direction (phiVny).


[ AISC(15th) Specification G5. (G5-1) ]
[ 0.78*Es ]
-. Fcr = MIN [ -------------, 0.6*Fy ]= 123000.0000 KPa.
[ (D/t)^(3/2) ]
-. Ag = 0.0004 m^2.
-. Vn = Fcr*Ag/2 = 27.2423 kN.
-. Resistance factor for shear : phi = 0.90
-. phiVny = phi*Vn = 24.52 kN.

( ). Check ratio of shear strength (Vu/phiVn).


( LCB = 2, POS = 1/2 )
-. Applied shear force : Vuy = 2.66 kN.
Vuy 2.66
-. -------- = --------------- = 0.109 < 1.000 ---> O.K.
phiVny 24.52

( ). Calculate shear strength in local-z direction (phiVnz).


[ AISC(15th) Specification G5. (G5-1) ]
[ 0.78*Es ]
-. Fcr = MIN [ -------------, 0.6*Fy ]= 123000.0000 KPa.
[ (D/t)^(3/2) ]
-. Ag = 0.0004 m^2.
-. Vn = Fcr*Ag/2 = 27.2423 kN.
-. Resistance factor for shear : phi = 0.90
-. phiVnz = phi*Vn = 24.52 kN.

( ). Check ratio of shear strength (Vu/phiVn).


( LCB = 1, POS = J )
-. Applied shear force : Vuz = 2.47e-003 kN.
Vuz 2.47e-003
-. -------- = --------------- =1.007e-004 < 1.000 ---> O.K.
phiVnz 24.52

Modeling, Integrated Design & Analysis Software Print Date/Time : 03/28/2024 09:37
http://www.MidasUser.com
Gen 2019 -6/6-

You might also like