'

v.

Complete Guide to

•i.w HUk.
r

BOSTON
PUBLIC
LIBRARY
 %
<N;£*
L tf»
«*'

Complete Guide to
Wfood Carving
 —

Complete Guide to
Wfood Carving
-» — *-

E. J. Tangerman

S Sterling Publishing Co. Inc. New York

 on page 1
Fig. 1. Medium relief on the surface of a log. This
seems like in-the-round carving. Carved by Bogosav
Zivkovic, it is now in a gallery in Yugoslavia.

The material in this compendium has been excerpted from

the following books by E. J. Tangerman, copyrighted and
published by Sterling Publishing Co., Inc.:
"Capturing Personality in Woodcarving" © 1981; "Carving
Birds in Wood" © 1984: "Carving Faces and Figures in Wood"
© 1980; "Carving Flora and Fables in Wood" © 1981;
"Carving Religious Motifs in Wood" © 1980; "Carving the
Unusual" © 1982; "Carving Wooden Animals" © 1980; "Relief
Woodcarving" © 1981; and "Tangerman 's Basic Whittling
and Woodcarving" © 1983.

Second Printing, 1985

Library of Congress Cataloging in Publication Data

Tangerman. E. J. (Elmer John). 1907-

Complete guide to woodcarving.

Includes index.
1. —
Wood-carving Technique. I. Title.
TT199.7.T345 1984 731.4'62 84-2756
ISBN 0-8069-5532-5
ISBN 0-8069-7922-4 (pbk.)

Additional material and arrangements © 1984 by

Sterling Publishing Co.. Inc.
Two Park Avenue. New York. N.Y. 10016
Distributed in Australia byOak Tree Press Co.. Ltd.
P.O. Box K514 Haymarket, Sydney 2000, NSW.
Distributed in the United Kingdom by Blandford Press
Link House, West Street. Poole. Dorset BH15 ILL. England
Distributed in Canada by Oak Tree Press Ltd.
% Canadian Manda Group. P.O. Box 920, Station U
Toronto. Ontario, Canada M8Z 5P9
Manufactured in the United States of America
All rights reserved
Library of Congress Catalog Card No.: 00-00000
Sterling ISBN 0-8069-5532-5 Trade 5532-5
Paper 7922-4
 Table of Contents

1. Before You Carve 7

2. Something About Tools 10
3. Sharp Tools Are Vital 24
4. The Right Size 28
5. What Wood to Use 32
6. Some Finishing Suggestions 44
7. Small Pieces 58
8. Carving Animals 65
9. Why Not Carve Flowers? 126
10. Carving Fabulous Creatures 141
11. Portraying Buildings 156
12. Carving Models 163
13. Carving Faces and Heads 172
14. Carving the Human Figure 189
15. Portraits 216
16. Why Not Carve a Mask? 222
17. Relief Carving 231
18. How to Carve Lettering 287
19. You Can Whittle Ivory 296
Appendix I 313
Appendix II 335
Index 347
 Digitized by the Internet Archive
in 2012

http://archive.org/details/completeguidetowOOtang
 Parti

Before You Carve

In Papeete, a New York hotel designer met —

packaged, all-alike products which many
with a Tahitian woodcarver to negotiate a of us have spent our working lifetimes help-
price for thirty tikis (Polynesian wood im- —
ing to make has risen a tremendous craft
ages). The first, they agreed, would cost movement, the desire to do one's own
2,000 Tahitian francs. "And for the next thing. As a result, what was once dismissed
twenty-nine tikis?" asked the designer. as primitive, folk, or naive art is coming to
"They will be more than 3,000 francs each," be recognized, because of its strength and
the carver said. "But why?" "Because only originality, as fully comparable with the
the first one is fun." often slavish and more rigid productions of
Neil Morgan told the story in Saturday academic art.

Review. Sharing that carver's sentiments, I My effort in this volume is to capture not
have spent whatever time I have had avail- only examples of American folk art but
able for fifty years, seeking out what for me those typical of faraway places, to give you
were new ideas for carvings, simple or com- a source for new and different ideas upon
plex. I have less interest in the familiar and which to build. This volume is devoted to
traditional European patterns, and much subjects quite familiar to most primitive
more in the things that primitive, and often carvers but less familiar to Americans the —
self-taught, carvers make purely for the world of mammals, birds and fishes, and
love of it. Somehow, such carvings are less even a saurian or two. Ancient man re-
rigid, less standardized, and far more imag- spected, feared and admired the inhabi-
inative — verve and of life. I bought
full of tants of that world; the development of
those carvings I could afford and that were cities and highways has tended to take us

for sale, and photographed or sketched out of it, even to destroy it, at an accelerat-
others. Retirement has made it possible for ing rate.
me to visit many of the less well-known I have tried to maintain logical groupings
parts of the world where carving is still of the designs presented here. The first few
respected and admired. sections include carvings that can be made
with the knife alone, while most of the re-
Prepackaged vs. hand carvings mainder can be done with relatively few
In recent years relatively high incomes and inexpensive tools. This grading is
and early retirement have provided many based upon my own experience in carving
people with leisure time as well as the fi- them; indeed, many of my own designs
nances to do with it what they want. Out of and carvings are scattered through the
this and an increasing disaffection with pre- book. I have provided such patterns as are

BEFORE YOU CARVE

 usually homemade and cherished, not for
their number or variety but for their neces-
sity. His "shop" is portable. In fact, only in
Europe and America have all the devices for
saving time been introduced, and in both
places we also have duplicating machines,
profilers and plastic-and-sawdust moulded
fakes.

How to carve more than shavings

When my son was learning to whittle, he
would say, "Now I'm going to make a dog."
After he had by mistake cut off a leg or two,
he would settle for a fish, but the final ad-
mission would be, "I guess it's going to be
another knife!" "Knife" was a euphemism
for the pointed stick that country-store
whittlers are always shown making. Wade
Martin, when complimented on the latest
of his excellent country carvings, would say
shyly, "I'd ruther be whittlin' somethiti' than
justbe whittlin' whittlin's!"
Fig. 2. Carving a horse's head with a chisel.
There should and can be more than just
shavings for an end product in carving.
What's more, the end product should vary;
necessary, and detailed instructions where constant output of the same thing is too
difficulty might be encountered, plus tips, much like Detroit and automobiles. That is
shortcuts and suggestions. There are also why I have spent as much time as I could
answers to the basic questions of the neo- spare this past half century hunting up new
phyte, to make this volume complete in designs to carve. In recent years, many of
itself. I have also included examples of re- these have been from faraway places, be-
cent original work of other Americans who cause the nearby ones are described in my
are more concerned with the enjoyment to own and other books. am still amazed at
I

be gotten from carving than with possible how good and free many primitive designs
income from it, and who whittle or carve as are, and how well they are executed, usu-
an avocation or leisure-time pursuit. They ally without the tools and equipment we
understand the Tahitian carver's reluctance consider necessary. You do not need a fancy
to turn himself into a production machine. shop to be a good woodcarver which is —
If you are also reluctant, this book was writ- one of its attractions for me.
ten for you. This book includes extensive summaries
All this tends to obscure the fact that of basic information on tools, sharpening,
woodcarving and whittling can be and are finishing in color or natural wood, and
being done with very limited numbers of changing drawing size. It has some simple,
—
tools and no other equipment what- but different, projects for beginning whit-
soever. The carver in Bali or Easter Island, tlers and carvers, then some more ad-
in both of which woodcarving is the only vanced ones, first for whittling with the
industry, rarely has more than four or five knife alone, then for carving with a variety
tools and probably uses a shaped club for a of tools. I have added Appendix II on
mallet and his knees for a vise. His tools are sharpening. The sections on knives and

8 BEFORE YOU CARVE

chisels are as up-to-date and complete as I difficulty, the easiest and so on. I have
first

can make them. Wood and finish-

selection shown some more detail than
projects in
ing are included piece by piece, but there is others, depending upon the number of
also a complete section on wood and its rough spots I encountered. Some pieces are
characteristics. All in all, I have tried to shown in step-by-step photos; where I felt
provide here a complete handbook for ex- they would be useful I have provided pat-
perienced as well as beginning carvers. terns. I have avoided specialized language
May your tools stay sharp and your wood and specialized tools, and tried to select
and your ideas be unchecked! examples that cover a wide range of sub-
jects.

Carving personality
Call someone an artist and the layman What to carve
will ask, "Oil or watercolor?" He forgets that In Kowloon one day, I asked a salesman
there were nine Muses, and the so-called in a carved-ivory shop what he carved.
fine arts include sculpture, poetry, prose, "Elephants," he said.
and dance, among others. Use the word "Horses are selling better," I offered.
"portrait" and your listener will ask, "Of "Have you ever tried to carve one?"
whom?" Even Webster's supports this view He shook his head. "No," he replied, "I

with the definition, "a pictorial representa- only carve elephants."

tion of a person." The use of that word for "a Indeed, there are whittlers who make
picture of an object" is now called obsolete. only old boots or wooden chains, and
There's a similar problem with the word carvers who make only decoys, signs, or
"image." furniture with traditional motifs. I've met
What we are seeking to capture is a professional cabinetmakers who never
personality, whether it be of a person, some tried carving at all until they retired.
other animal, or of an inanimate object. This book is not for any of the above. It is

What this book deals with are individual an effort to assemble a number of attractive
likenesses, representations of specific ani- and unusual ideas in materials, subjects,
mals, flora and inanimate objects so that techniques and treatments that I have
they are distinct and recognizable. found refreshing alternatives to typical
We have a chapter or two on depicting woodcarving and predetermined commis-
the general shape of things other than peo- sions. Finish is indicated piece-by-piece,
ple,then progress to attaining likenesses of and I have also provided traceable patterns
such diverse subjects as a house, a barn, for a number of them. Because many of my
other models, a hobby, a dog or two, and carvings are unusual, I have already sold

ultimately portraits of people. Included are some, and could have sold more.
such ideas as how to copy a statue in mini- Many of the designs are not American,
ature and how to make masks of animals because some of the most unusual of carv-
and people. ings are foreign in origin. Most are, how-
In short, I've tried to explain how to carve ever, folk art rather than formal art, because
a likeness of just about anything. This is a the latter usually follows traditional pat-
frequent to any woodcarver,
challenge terns available from many sources, and
whether he be amateur or professional, mostly utilitarian in application. These de-
neophyte or skilled. Many of the examples signs are largely for fun and "for a change."
here described were commissions, because Go to it!

many customers want likenesses, if they

can get them, particularly of something
near and dear to them.
I have tried to arrange the text in order of

CARVING PERSONALITY
 — —

Something about Tools • . .

Ancient man carved the materials he had should be pen, spear or an equivalent. Be
with whatever tools he could devise. His sure blades open and close easily, yet do not
incentives were undoubtedly to placate the wobble, and do open out straight and
gods or worship them, to make a tool easier firmly.
to hold and to make an image for himself or
his children. Wood was abundant in most Fixed-blade knives
areas and could be cut by stone, so the Ifyou find carving a particular material or
stone knife and chisel found early use, fol- subject preferable, you can branch out and
lowed by the axe and the adze when some- get specially shaped fixed-blade knives to
one discovered how to make and bind on a suit what you're doing. These are easier
handle. The point is, that ancient man got —
and safer to use at home the blade won't
along with relatively few tools. So can you, —
snap shut on your finger but they aren't
until you know what you need. as portable. However, I know tool enthusi-
asts who have made their own knives from
The carver's pocketknife old saw-blades or straight razors and have
The most universal tool is the knife, par- special cases to carrythem in, just as I carry
ticularly the pocketknife, because it is so a roll with a number of chisels. Mine in-
portable and adaptable. A good one can cut cludes sharpening aids, and so should
a wide variety of materials, certainly those yours. Have at least one narrow and thin
mentioned in this book. Because man is so blade to get into concavities and tight cor-
inventive, he has developed an extraordi- ners, and one wide, heavy blade for rough-
nary number of variations on the knife, ing. I also find that a blade with a concave
each with its own special purpose and ad- cutting edge (which I call a hook), originally
vantages. You can buy any number of blade developed for leatherworking, is helpful in
and handle shapes, even blades with blank carving details. Blades should be short
handles you can carve to fit your hand. But not over IV2 in (3.8 cm) long for most work
it is better to start with a good pocketknife, kept sharp, and oiled to avoid rust.
with a maximum of two or three carbon- Many sources are eager to sell you a set of
steel blades (stainless won't hold an edge as carving tools, a mixture of types sup-
well) and no belt clips, can openers or cork- posedly put together by an "expert" that
screws to chafe your palm. Because the includes some you may never use, as was
knife will change position in your hand for the case with the 9-tool set I bought origi-
various cuts, it should have an essentially nally. Further, you don't have to buy the
smooth and uniform handle, comfortable finest tools available; buy cheap ones until
to grip. Blades should include at least one you find out what you really need, then
with a sabre point, usually the big one supplement with better quality. With a little
known as a B-clip The other one or two care, you'll find that cheap tools work al-

io SOMETHING ABOUT TOOLS

 MASTER BLAM TANG RIVET LINIM4 f CASE
JNAU fclAOl

X
HAN&U covl « *
j
. Vhf
^-OPENING SLOT f BACK SPKIH« PIVOT
TERMIN0106Y

HOOK BLADE.

TO]
SPEV CARVtA'i CHIP-CAKVIN6

KNIFE-BLADE SHAPES

Fig. 3. Knives for woodcarving.

most as well as expensive ones. They do for sharp point (sabre or B-clip) and a smaller
me. one with a stubbier tip (pen) is the basic
answer. It can have three blades, but
How to choose knives shouldn't have more than that or the knife
If you are just starting to carve, you can't becomes too clumsy. I usually carry two
beat a and a piece of pine or
knife —
knives one with pen, spear, and B-clip,
bass wood. The great convenience of the the other with pen and B-clip. The three-
pocketknife or clasp knife is that you can bladed knife is larger and has wider blades,
take it with you and set up shop whenever so will take heavier cuts; the small blade
you're so inclined. A knife with a fixed handles the delicate and hard-to-get-at
handle is safer for cutting (the blade won't spots and shallow concavities. The small
snap shut on your finger) but a nuisance to blade is more likely to break and harder to
carry; its edge must be protected against all control, as well as slower, but the big blades
things hard or soft. Its handle is bigger and get in their own way on occasion.
more comfortable, but you need a sheath to
carry it. The knife should be of good quality Grain
and have a carbon-steel blade, rather than Wood has grain and tends to splinter and
stainless. It will rust if you don't keep it split along it. It is much easier to cut with the
lightly oiled, but it will also hold an edge grain than across it, of course (those long
longer, which is important unless you long curling chips are cut with the grain), but a
to carry a hone and a lap with you as well. tree is a living thing and its grain may not be
As to blade shape and size, you'll find straight, or it may veer around damage or a
that you seldom need a blade longer than knot. The
first thing you must learn is to

IV2 in (4 cm); a longer blade will bend and keep the grain in mind at all times. If you
your hand is too far back to control it as cut with it, it's easy; if you cut squarely
well. A knife with one long blade with a across it, it's harder work but no problem

HOW TO CHOOSE TOOLS 11

 Hand nray be
*" turntd ov«r

POINTING CUT PARING CUT DRAW CUT SLICING CUT

No control -h<znce danqer. Good cut control- wdkk thumb! Poor control- tends to Close control - mdy tend
Forca from arm mascles Force from hand clenching follow arain. Arm -force to follow cjram Arm force

THUHB PUSH
Shortcuts- ROCKING CUT CHAMFtRor CURL CUf STABor DRILL CUT HOLLOW CUT
cjrea+er pressure Chip carving -qood Close control - must cut u) ith 5<zries of hand pushaj, Tip cuts concave.

Q\osq. confrol- across gram- Arm force qrain. Arm rotation r fore? Danger of blade closing Watchcjrain!.'!
Arm force
Fig. 4. Typical knife cuts done with one hand.

Fig. 5. Typical knives for woodcarving

include: A, a penknife with pen and B-
clip blades, and B, a slightly larger one
with pen, spear, and cut-off pen. Both are
German-made. Below them is C, an
inexpensive fixed-blade knife, and to the
right is a Swedish sloyd, D. The others
are specialized shapes: E and F are used
for chip carving; G is a German fixed-
blade knife.

12 SOMETHING ABOUT TOOLS

with but watch out if you cut into
splitting; like that used by someone peeling a potato:
the grain, because even the thin wedge of a the knife caught in the curve of the four
knife blade may cause splitting and will fingers, the thumb on the work, and the cut
certainly cause some roughness. The prob- made by closing the hand. That gives the
lem varies with the wood: basswood and greatest control because it is finger rather
white pine offer fewer problems than ash or than arm muscle that does the work. (While
mahogany, teak less than walnut. You will you're learning this cut, be careful of your
learn about grain quickly and soon appreci- thumb.) Other frequent cuts are made with
ate the necessity for cutting in the opposite the thumb or the forefinger extended along
direction on the into-grain side of even a the heel of the blade to provide added force
slightly diagonal groove. just behind the cut itself. Or the knife may
be gripped like a dagger and drawn or
—
pushed to make a slice this is an arm-
How to cut with the knife muscle cut, so control is poorer. Another
The standard cartoon of a whittler type of cut is that in which the point of the
shows him paring off big chips with bold knife is pushed into the wood, then the
strokes going away from himself. That is knife is rocked or rotated, in the first case to
very safe but produces only chips. The make a triangular incision and in the sec-
most important cut for the knife is exactly ond to make a cone-shaped depression.

,TANG

SKEW FND
FIRMER •- FLVT CHIStL

SHANK SHAPES

FIRMER
FLAT 600«-
\^y
SCROLL .t
WvElNeR
QUICK FIOTH V.« PAR1IN6 MACARONI
WlCAL CUTTING-EDGE SHAPES (SWEEPS)

Fig. 6. Chisel shapes.

HOW TO CUT WITH THE KNIFE 13

 Fig. 7. Typical chisel
shapes: A, 1-in (25.4-mm)
No. 9 spade gouge; B, Vi-
in (12.7-mm) No. 10
gouge; C, Vi-in (6.3-mm)
V-tool; D, veiner; E, Vi-in
(6.3-mm) No. 7 gouge; F,
Vi-in (12.7-mm) firmer; G,
5
/s-in (16-mm) bullnose
firmer.

A, 1-in (25.4-mm) skew

Fig. 8. Shorter tools include:
firmer with homemade spade shank; B, 2Vi-in (6-cm) No. 5
spade gouge; C, Vi-in (12.7-mm) bullnose No. 7 gouge; D,
IVi-in (3-cm) No. 5 gouge.

Some cuts are better done by using the

thumb or forefinger of the other hand to
push and guide the blade. This is very help-
ful with harder woods and ivory because
the actual cutting force can be so exactly
controlled. The cut, in any case, is very
short because the hand itself will be grip-
ping or resting on the work.

Chisels
Woodcarving tools have a long history
and, thus, a vocabulary all their own. The
straight chisel, like a carpenter's chisel but
lighter, is called a firmer. It is sharpened
from both sides so it doesn't dig in. If the
edge is at an angle to the blade length it is
called a skew, and is used for getting into
corners, much as a knife would be (I use the
knife). The rounded chisels are called
gouges, as in carpentry, but come in a wide
range of widths and curvatures or sweeps
from almost flat to U-shaped. The very U-
shaped ones are called fluters, particularly
in small sizes. One of the most useful of
gouges is a very small half-round one called
Fig. 9. Special shapes:
A, 1-in (25.4-mm) long-bent
No. 9 gouge; B, %-in (19-mm) spade V-tool; C, a veiner, because it's used to carve veins,
short-bent No. 5 gouge. hair and any other very small grooves. Its
14 SOMETHING ABOUT TOOLS
alternate is the V-tool (or parting tool, from There are also dog-leg tools, in which a dou-
wood-turning), also used for grooving. ble bend offsets the cutting edge from the
This is essentially two firmers put together line of the shai|k. (Fig. 6)
in a vee; it is sharpen because of
difficult to Carving tools may be driven by the hands
this, but it cuts two sides
at once. There are alone on small work in soft woods. On
also more specialized tools such as the hand-held work, the palm tools are easy
macaroni, which cuts a 3-sided groove with because they require only one hand. But
a flat bottom and square corners, and a they are very slow in material removal (as is
fluteroni, which cuts a similar groove with a pocketknife), though they work well on
rounded corners. These are very difficult to ivoryand bone. If the piece can be held or
sharpen and of almost no use to amateur secured in any way, the long-handled tools
carvers. are preferable, since one hand can supply
You may have a choice of handle on the push while the other guides and restrains
chisels. Usual ones are round or octagonal, the tool. The method I use is to hold the
tapering towards the cutting edge, the bet- chisel in one hand and drive it with a mallet
ter ones with brass ferrules at the tang end of suitable weight for the work being done.
Round ones are usually
to inhibit splitting. This way, I get more precise control of the
maple, ash, beech or boxwood. The oc- cut with less danger of splitting a problem —
tagonal ones may be dogwood (preferred in with hand pushing because it is difficult to
Germany). Octagonal handles are less control arm-muscle force accurately.
likely to turn in your hand or roll off a
bench. There are now plastic handles also, Mallets and adzes
but I prefer the octagonal wood ones with Mallets can be designed to your specifica-
ferrules. (You can, incidentally, turn your tions, or bought ready-made. I prefer the
own handles and use short sections of pipe traditional potato-masher type, and in re-
for ferrules.) Some tools, particularly short cent years have used those with plastic or
ones, are available with palm-fitting
handles, like an engraver's burin. I prefer
the longer handle because it gives more
clearance for the mallet and less chance for
barked knuckles.
The rear of a chisel ends in a tang, a
pointed end that goes into a hole in the
handle as far as its collar will allow, while a
ring on the handle prevents it from splitting
under the wedging action of the tang. Ob-
viously, larger chisels must have tapered
shanks to end in a tang, which leads to the Student Professional Old English rVim.ttVe Cooper's

spade or fishtail design where the blade is MALLETS

wider than the shank. This is also done on
many smaller tools because it gives greater
clearance in carving and lightens the tool.
Also, because straight tools are of limited
usewhen entering certain areas, tools are
made with bent shanks, ranging from a
very short and half-circular bend called a
knuckle, through a short bend (spoon) and
on to a long bend. Some tools are made
with similar bends backwards, and are
ADZES
called back-bent tools, but are of lesser value. Fig. 10. Mallets and adzes.

CHISELS, MALLETS AND ADZES 15

 —

is always increased danger, and with some

NEEDlE RASP !»•* it is advisable to wear goggles and mask,

and to work in an area where noise, dust

and possible vapors (from such woods as
»| TI*AT» RASP RlFFlERSh«pfs II II cocobola or rosewood) will not affect oth-
ers.These power tools remind me too much
of mass production, so I shy away from
using them unless I have a large block with
a great deal of roughing to be done or a
piece in which the contour permits me to
GRAVER or BURIN cut out and save a smaller section. Rotary
tools tend to chew the wood away, and
Fig. 11. Rasps and burin.
small burrs tend to burn the surface.

rubber faces to reduce shock in my arthritic

shoulders. Other carvers prefer babbitt- Vises and benches
faced mallets or even copper or brass ones, For conventional amateur work,
but these tend to split tool handles, as an particularly with chisels, you may want to
ordinary hammer would. Further, their di- have some form of holding device. I have
ameter is small, so more attention must be used a machinist's vise, opening about 4V2
paid to hitting the handle end squarely. in (11 cm), for years, and a long-leg car-
In addition to these specialized carving penter's vise for larger pieces. In recent
tools, there are also a great number of aux- years, I have also used the carver's screw

used by specialty carvers. These

iliary tools which screws through a bench or table into
include various kinds of saws, such as sabre the base of the workpiece and holds it with
and scroll saws, rasps of various sizes a tightened wingnut. Mine are hand-made
(much used for decoy carving in soft by a friend from lag bolts or threaded steel
woods), riffler files in various shapes to rod. If the piece is relatively large, no
smooth tight corners, scrapers, hand clamping will be necessary as its own
routers and the usual carpenter's tools, in- weight will hold it. Panels can be held by
cluding planes and chisels. Carpenter's nailing through scrap areas, by holding
cheaper and heav-
chisels, incidentally, are with a benchplate (a square of plywood
ierthan equivalent woodcarving tools and, with a stopboard), or just placing them on a
thus, good for roughing. The hand axe, section of discarded ribbed-rubber door-
shingling hatchet and adze are also used, mat.
particularly on and rougher work,
larger You can, of course, have a carver's bench,
like wooden Indians and totem poles. Indi- a 4-legged stand or even a stand of the type
ans of the American northwest coast, Af- sketched here, but they take up room and
ricans and Italians use adzes for most carv- begin to require a shop or studio. I do most
ing. (Fig. 10) of my carving seated next to the fireplace in
my living room, with the work on my knees
Power tools or lying on a card table. When clamping is
Americans, who are accustomed to mecha- needed, I adjourn to my cellar workbench
nizing everything, have added a whole se- or to a picnic tableon the terrace, both of
ries of power tools to this list, including which can take clamps, vises or carver's
chain saws, band saws, circular saws, Sand- screws, as well as any amount of shock
ers of various types —
including hand-held from mallet blows.
ones that take cutters or burrs as well as The "proper" way to carve is to stand at a
—
grinding shapes and even pneumatic or high bench or stand that is heavy enough so
electric hammers. With power tools, there it doesn't shift under the mallet blows.

16 SOMETHING ABOUT TOOLS

Some sculptors have four-legged stands
that areweighted with a rock towards the f^> CARVER'S BENCH
bottom, with the top adjustable for height, MieMmericd WaxJcarycr.?
»u.t-/'±
possibly even incorporating a lockable lazy
Susan so it can be rotated. Panel carvers,
like those who work on cuckoo-clock
Two carver's screws
frames, have sloping tables with 2-in (5-cm)
tops and pins to index and hold the work.
When work on
I a trestle table on the ter- <f\ screws
(3V3Sh«rj
race, abasement bench, and on a card table,
I sit down whenever possible. The main

thing is to have a stable surface that will

absorb mallet blows, with some sort of ad-
jacent surface on which your tools may be
placed. For any given job, you rarely need
more than ten or a dozen tools. You can
have whatever sort of bench or stand that
suits your ego, and as many tools as you
like, but a solid surface and good light, plus

some air, suit me best.

Fig. 12. Carver's bench.
Personally, I don't need a studio.
(6.4 cm) for flat gouges. European tools are
Tool sizes and names sized in millimetres: 1, 2, 3, 4, 5, 6, 7, 8, 10,
Carving tools are sized by the width of 12, 16, 20, 25, 30, 35 and so on (1 mm =
the cutting edge, in inches from Vi6 in (1.6 0.039 in).

mm) to % in (9.5 mm) in sixteenths, on up Gouges are usually numbered also by the
to 1 in (25.4 mm) in eighths, and in larger "London" system that measures arc or ra-
steps to the maximum, usually about T-h in dius of the sweep. A firmer is No. 1, a skew
No. 2, a flat gouge No. 3 and a U-shaped
one No. 11 or 12, with the other arcs in
between.
Some suppliers use other numbers for
the special tools, from this series or their

Opp

-*«3S^SSSSSTO$£
CARVER'S SCRtV

Fig. 13. Two methods of securing your carving.

BENCHES 17
 —

own catalogue numbers. Charles M. angle of the tool as you cut so it doesn't run
Sayers, who taught panel carving, sug- in and stick or run out and slip. You start
gested four tools with which to start: Yi-in cutting at an edge and work towards the
(13-mm), or 3
/s-
5
to /s-in (9.5- to 16-mm V-tool middle; you cut to an edge, the chisel will
if

or parting tool [No. 39]); 5/s-in (16-mm) No. break out and tear the wood.
5 straight gouge; 1-in (25.4-mm) No. 3, or As cutting begins, necessary to ad-
it is
3
%-in (22-mm) straight gouge; and a /s-in just the angle of the tool so it cuts through
(9.5-mm) No. 7 straight gouge. For relief the wood at the desired level too high an —
carving, he added a 3/s-in (9.5-mm) No. 5 angle will cause it to cut deeper and deeper,
straight gouge. (See Figs. 7, 8, 9) too shallow an angle will cause it to run out.
H. M. Sutter, who has taught panel carv- This is particularly important with the
ing for over 30 years, starts his students high-sweep or U-shaped gouges. If the cut
often teachers themselves —
with five tools: is too deep, the edges of the gouge can get
3
/8-in (9.5-mm) No. 3 and 5/8-in (16-mm) No. below the wood surface and cause edge
5 straight gouges (these two preferably fish- tearing of fibres.
tail); %-in (9.5-mm) No. 9 straight gouge; In relief cutting, it is important to outline
V32-in (.79-mm) No. 11 veiner and a 3/s-in the desired shape by "setting in" —driving
(9.5-mm) No. 41 parting or V-tool, plus an the firmer or gouge into the wood to the
all-purpose carver's knife. Note that neither desired depth along the line, so that cuts
suggests fancy shapes or skew chisels, at made to remove background wood will
Begin small, then buy with the
least to start. stop at the cut line instead of splitting or
guidance of an experienced carver or — running into the design. When a chisel is
you're likely to end up with heavy pattern- driven vertically into wood, it obviously
makers' chisels or worse. must wedge the fibres aside, so it will cause
To carve the harder materials included in crushing and splintering of fibres along the
this book, try small chisels, particularly the edge of the outline. This can be avoided by
veiner and V-tool. I find engraver's burins cutting a groove just outside the outline
(solid chisels) of little help, though en- with a veiner, fluter or V-tool, so the edge of
graver's palm tools can work well. Riffler the groove touches the line. Then, when
files will help on occasion, as will power the firmer or gouge is driven in along the
grinders; Eskimo and German ivory carvers line, the groove provides relief for the tool
are both using these now. Also of help will wedge at the surface. As a matter of fact, in
be a chamois-skin or leather pillow filled shallow-relief carving, particularly in green
with sand. The work can be nestled in it wood, it is often possible to get the required
with less danger of rolling and slipping. depth of background (called "bosting")
Further, most of the hard materials are diffi- with a deep fluter alone, leaving a desirable
cult to hold in a vise or clamp because they small arc at the bottom edge of the upstand-
are rounded in shape and brittle. ing portion.
Your constant challenge will come from
Chisel vs. knife the grain of the wood. In any diagonal cut,
I FIND chisels easier to learn to use than the for example, one edge of the gouge will cut
knife. The cutting edge is narrower and less cleanly, the other will drag and tear the
versatile and it is pushed directly instead of wood slightly because it is cutting into the
being used in an arc by finger or arm power. grain. You'll learn how to cope with this
If you use a mallet, you must obviously and soon will be adjusting automatically for
learn to watch the chisel edge, not the head it. The other major point is to keep your

of the mallet. You must learn to take it easy tools razor-sharp, particularly for cutting
and not try to remove all the waste wood on soft woods — so you'll have to learn how to
the first pass. You must learn to adjust the sharpen.

18 SOMETHING ABOUT TOOLS

 LEFT-INDEX DRAW CUT"
5havina f detailing. Gives
c\os« control with more force

LEFT-THUMB ASSIST
Close control -more force

5 heft, precise cots or r/vivinq

6UILL0TINL CUT
Adds force, at blade tip.

Left inAt*-nn«er-ortnurnbpush

LEFT INDEX-FINGER ASSIST

Shaving cuts. Work must be
clamped or held by left hand

Fig. 14. Two-hand knife cuts.

\^

Heavy & straight cuts Light ©.curving cats Side cut* & \Mbol cuts
Heel of b»ck hand pushes handle end Back. ha*vd prtjtes forward I steers Backhand presacs
Near hand a« ides, prevents evtrcuts&l.pi Wear K*nd re strains, rests onwork Kieif nana pulls, r<st» on work

Mallet Firftittp in wattin^out b»ek- Rat" qouqe rrmovi) wast*

1 ereunds. Essential Kmi q*m wood. Repeat cycle to qet
end. in outlining Uw-nslirfsubjed) desired depth.
"Pais acrost-enin cut
Mallet 01 rtwxl
stops cVi'ip over- runs
side fa side

ir»in

Bosti'nq or
^ Grounding
=S
Stop
z.
cut
How to relieve

a stickino, cjouqe

Fig. 15. How to handle chisels.

KNIVES AND CHISELS 19

 Fi'r*w«r |>
f\<ntf
hrntr
MO!

Outlining Sctting-\n Groundina 2r\A J«t-in

Mm
Fig. 16. Setting-in is an extended stop cut.

Some general hints shapes has some advantages in rounding

When you are using either knife or chisel, convex surfaces and attaining flatness, but
try to avoid wedging out the chip; you may tends to drag at the heel in any hollow
break the tool or split the wood. Obviously, cutting. No blade should be longer than
tools are not to be used for cutting news- about V/z in (3.81 cm). Be sure the pivots are
paper clippings, paring nails, or peeling tight and the springs strong, so the blade

electrical insulation; all these destrov the opens and stays open, without wobbling.
cutting edge. The old professionals laid Beware of excrescences like corkscrews and
their chisels out with the edges towards clevises (for belt hooks); they will cause
themselves, so they could select the right sore palms and blisters.

chisel easily I find this hard to do because it As you progress, add fixed-blade knives
requires reversal of the tool when you pick for protracted use —avoid the straight blade
it up and when you lay it down. Some and rounded tip of some such knives. Or
carvers put distinguishing marks on han- add a chuck handle with several shapes of
dles for rapid identification of frequently blades, but be certain the handle fits your

used tools. hand well and the chuck can be screwed up

Leave a light film of oil on the tools after tightly on sturdy blades. The thin blades
—
use it will reduce rusting. This is par- are useful only for extremely delicate work.
ticularly true of pocketknifes: sweat can be Be conscious all the time that the knife
very corrosive. Keep tools very sharp. Store has a fairly long cutting edge, and never get
them out of reach of the curious, old and anything in front of that edge unless you
young, and keep the edges protected if you intend to cut it. This is meant particularly to
carry them about. apply to the hand holding the work and to
If you nick yourself, protect the cut, be- the cutting-hand thumb on paring cuts.
cause you may find you'll repeat the nick- You can't whittle and talk or watch tele-
ing. This is particularly true of the ball of vision.
the thumb when you make small carvings Beware of sticking the blade tip into the
with paring cuts.It may be advisable to use wood and exerting pressure; the blade may
a fingerstall initially; stationery stores sell close on your fingers. For the same reason,
rubber ones that are used by people who always hold the body of the knife in your
sort papers. fingertips when and make
closing a blade,
the final closure with the palm of your
Starting to whittle hand. Never have two blades open at once.
If you are starting to whittle, and intend On a folding blade, there is a boss that
to make hand-size items in soft wood, use a prevents a finger from slipping onto the
first-class pocketknife with carbon-steel cutting edge; many of the special knives are
blades, one pen and one B-clip. A third not thus protected.
blade can be a spear, a cutoff pen or a sheep- It is obvious that a blade should not be
foot. The straight-cutting edge of the latter hammered, or used for miscellaneous cut-

20 SOMETHING ABOUT TOOLS

ting, like paper or fingernails, or for skin- force than those with the grain, so there is
ning electric wire. Also, it should not be increased chance of error. Also, when
sharpened on a wheel unless it is nicked or across-grain cuts and with-grain cuts are
chipped; then it should be cooled twice as alternated, the difference in force required
often as you consider necessary. Cutting and the an across-grain chip tends
fact that
newly sanded areas or scraping a surface tocrumble must always be kept in mind.
takes off a newly honed edge faster than a The "hollow cut" provides a good example
half day of cutting. of this.
When the blade enters the grain,tends it

Chips to tear and split the wood ahead of it,

while
Chip size should be adjusted to the wood on the exiting portions it cuts smoothly;
and the design. It is a delight to cut big thus a conical cut is best made with four
chips in soft wood, but they tend to be hard quarter cuts, each with the grain, rather
to control, so you may cut beyond your than one continuous one. A pointed blade
intended lines or generate a split. It is ad- can be used directly as a drill by simply
visable to make a stop cut across the grain rotating it, but the same danger of tearing

before you attempt to make a cut to that exists in that case. In general, when it is

point with the grain. The harder the wood necessary to whittle across the grain or
or the greater its tendency to split, the around knots or other likely grain vari-
smaller the chips should be. Also, chip size ations, it is advisable to make very light cuts
should be reduced as you approach finish- and observe the action of the blade con-
ing dimensions. stantly to determine when cutting direction
Rough all areas before any one is fin- should be changed. (In this kind of situa-
ished; this way a gash or nick can still be tion, the woodcarver reaches for a riffler

corrected. Chips should be cut out, not file.)

wedged out; wedging may break the blade you keep your knife sharp and cut ac-
If

tip and will certainly bruise or dent the curatelyand cleanly, sanding should not be
wood fibres against which the knife is necessary. With occasional exceptions, a
pressed. whittled piece is the better for having the
slight planes left by the knife; they catch the

Stop cuts light and show formed

that the piece is not
plastic. Further, sanding tends to smear the
In cutting a slot or a V-groove, it is ad-
surface, and, particularly on harder woods,
visable to make the end stop cuts first, then
will dull the clean gloss surface left by the
cut down the center with the knife tip, be-
tool. If you must sand, use worn fine sand-
fore cutting the two sides in towards the
center. This gives better control of groove paper sparingly.
shape. It is important to cut with the grain
whenever possible because any angling cut The whittler needs
will be clean on the side running out of the only one tool
grain, but tends to tear and run in on the "Whittling" means to work with one tool
side entering the grain. Thus, grain should to pare away wood, so it could be applied,
always be considered when laying out a for example, to a totem pole made with a
design and when its outlines are being shingling hatchet or to a figure carved with
carved. (In some woods, cuts with the grain an adze, or even an axe handle shaped with
in one direction may cause trouble which a spokeshave. But the common under-
can be avoided by reversing the cutting di- standing is that whittling is done with a
rection.) knife, to produce a one-piece object usually
When possible, cuts across-grain should small enough to be held in the hand. Most
be made first. Across-grain cuts take more whittlers saw out the blank, and sand it

chips and stop cuts 21

Fig. 17. —
This one-piece daisy is a variation of the old whittling trick the fan. It is cut across grain so that
the petals can later be split and spread. In this case, the petals were not interlocked, but held in place with
thread.

when finished, so they have actually used carving concave surfaces and shaping de-
at least three tools, but they only count the tails.

knife. There are many strokes or methods of

If your idea is to produce likenesses, cutting suited to particular purposes; you'll
you'll want more than a knife before you're learn them you go, as I did, but here are
as
through, because a knife, although it is the some pointers: A pushing cut with the arm,
most versatile tool, creates problems in as you'd make when cutting a point on a

22 SOMETHING ABOUT TOOLS

 —

stick, is safebut not very effective, except are also the primary tool for in-the-round
for roughing, because it is hard to control; a roughing; the gouge cuts a trench and does
draw cut, in which you hold the knife like a not normally cause splitting at the edges, as
stiletto and draw it towards you, is good for a firmer may if in deep. The gouge is very
outlining, but tends to run with the grain, versatile in such shaping. The firmer is pri-
This tendency can be reduced by holding marily a finishing tool, used to obtain a flat
the knife the opposite way, with index fin- surface or a curved surface without tool
ger extended along the blade heel and the marks and scallops. The rough shape of the
knife sloped in the direction of the cut, subject is obtained with
gouges; final
rather than vertical. I find that I often use modelling of convex surfaces is done with a
either thumb on the back of the
or a finger firmer.
blade to apply greater force to a cut, and use Particularly on backgrounds, it may be
a thumb or forefinger of the opposite hand desirable to texture the surface — this breaks
on the heel to combine force and control on up impinging light and makes that surface
precise cuts. look darker and more remote. There are
many ways to texture, but I usually do it

Relief carvings with a small fluter, cutting random scal-

"Setting-in" is really an extended stop cut, lops.The East Indian carvers almost uni-
and applies particularly to relief carving, formly use pattern stamps, which crush the
This procedure makes it possible to cut surface into star or other patterns. Such
away the background. After the design is stamps can be made of spikes by grinding
drawn on a panel, the first step is to outline off the points and filing on a star or other
itwith a small V-groove just outside the design, or leather-working stamps can be
outer limits of the design all around. This used. The same techniques can be used for
cuts the surface fibres and provides a guide, texturing parts of a modelled carving — to
Then appropriate firmers and gouges are suggest clothing, for example. Hair and
driven vertically into the wood all along the beards and fur require more specific atten-
V-groove to make an extended stop cut. tion, and instructions have been provided
This is usually easier with a mallet, and the in the chapters where such attention is
chisel should be driven in only a short needed.
depth avoid crushing the fibres
initially to In my opinion, and faster to
it is easier
on each side or starting an incipient split or use chisels than knives for most carving,
breakout. About Vs in (3.2 mm) is safe in although the knife is my favorite tool and I
hard woods, double that in pine or rely on it in a pinch. The skilled carver can
bass wood. When setting in around a pro- accomplish miracles with sweep cuts
jection or other thin section be very care- swinging free on any surface. It goes almost
ful — slope the chisel away from the section, without saying that you should learn to
The background is cut away up to the set- watch the chisel cutting edge, not the han-
ting-in, and the procedure repeated until die top, when using a mallet, and that you
the desired depth of background is should not try to cut off all the wood on the
reached. first pass. On cross-grain cutting, start at an

The usual tool for hosting or grounding edge and work in; do not work towards the
(cutting away) the background is a rela- edge or you will split it off. Keep your tools
tively flat gouge, because it does not catch very sharp, particularly on soft woods, do
or stick at the corners as a firmer does, not pry out chips or you will break the tool,
(Some carvers intentionally round the cor- and do not use chisels to open paint cans or
ners of the cutting edge on firmers to avoid strip insulation; that is what screwdrivers
this,but such a bullnosed tool cannot cut are for. Protect the edges, particularly when
square and flat surfaces so well.) Gouges tools are stored.

RELIEF CARVINGS 23
 Sharp Tools Are Vital

Hand methods Whetting, honing and stropping

The necessity for keeping tools sharp turns There are three additional steps to sharp-
off more embryo carvers than anything ening, and these should be your primary
else.People don't like to take the time to concern. They are whetting, honing and
sharpen tools, so they do not learn to do it stropping. The first two are really fine-
properly, or they leave it until there are a grinding operations, but done on a flat
number of tools to be sharpened. I can sym- stone by hand rather than on a wheel under
pathize with all this because I hate sharpen- power.
ing, myself, and I do not do it well. The Whetting is done on "Washita," a yellow-
edge of a cutting tool is really a microscopic ish or greyish natural stone; honing, on
saw backed by two wedges, the first just "Arkansas," a white, very hard, uniform
behind the edge and the second extending and fine-grained white stone, or their man-
back at the accepted included angle of 30 ufactured equivalents. Some makers now
degrees, more or less. I say "more or less" have the two (whetting and honing grains)
because a thinner angle and sharper edge on opposite sides of the same piece.
work better on softer woods, and a blunter "Slips," the small shaped stones for honing
angle is necessary to hold the edge when the burr off the insides of gouges and V-
hard woods are cut or a mallet is used. tools, are also made of "Arkansas," or
The objective is to reduce the number of should be —beware of the coarse reddish
microscopic feathery teeth and to reduce "slips" that are sometimes offered. In day-
their length, then to keep them as nearly to-day carving, honing is a frequent opera-
aligned as possible. This is done by a series tion, one that pros do subconsciously while
of sharpening steps, particularly when planning the next cut; whetting is much
sharpening is done by hand. The first step less frequent unless the wood is very hard
is the rough grinding of the edge to an or abrasive.
approximate angle; this is usually done by The final operation is stropping the —
the manufacturer on a production basis and same operation a barber does with a
need not be repeated by the user unless the straight razor. Properly done, it is two oper-
tool is broken or badlv nicked. In fact, it is ations (about three strokes each), one on
inadvisable for the user to sharpen a tool on rough leather with an oily surface contain-
a conventional grinding wheel under any ing a somewhat rough or other fine abra-
circumstances, because he is almost certain sive, the other on a smooth leather surface
to burn the edge, thus removing the tem- containing only a little oil. All the opera-
per. If you must grind, have a water-cooled tions on stones are done by pushing the
wheel, or wet and cool the tool at least twice tool edge towards the abrasive as you would
as often as you think necessary. in cutting; stropping is done by pulling the

24 SHARP TOOLS ARE VITAL

 Ra icve 1 corit, rs Rou nd c o rnc«j

fSSk) rrrnuis
Slight roundinq Onfiro^riix bulLost. 4 sparf
NO WO YES
mini poiWt of Y, T lat<jouo«s, alis firmer to avoid
KEEP EDGE SQUARE reduces drag flexibility diqq'mg connars

INMER BEVEL on GOUGE STONINGA FIRMER- & kGOVGt

After whetting, honaa very j^adg<z-fiVs1(foH on strop) Roll ^ pull aloncj

slight bcv«| on inner face

to avoid digging in i"to

Fig. 18. Tricks in sharpening.
langtrwn edge life.

edge backwards. This aligns the tiny feather the angle behind the cutting edge is less
edges on the blade. than it should be, reducing drag. It is also
Nowadays, most tools are sold ground claimed to make the cutting edge stay sharp
and whetted, and with a proper included longer, which may be true on soft woods
angle, generally speaking. (It will be worth- but I doubt it on hard ones; my experience
while for you to eventually experiment is that it may make the edge turn or nick. I

with an included angle, particularly if you should point out, in all fairness, that these
get into carving very hard woods, bone, are matters of opinion, and "experts" differ.

ivory and stone, as I do frequently.) Knives I have tried to sketch the motions used in

are ground so that the blade itself has the sharpening tools, both to maintain their
proper angle; firmers have an included an- edges and to keep from wearing hollows in
gle of 30 degrees, 15 each side of center; and the stones. (Many stones become chan-
gouges have a straight interior and 30-de- nelled from excessive center wear and this
gree bevel ground on the outside. (Beware of may result in dullness in the center of the
patternmaker's chisels with the bevel on the cutting edge on a firmer as well as rounding
—
inside they tend to dig in and are very or "bullnosing" of the outer corners, which
difficult to resharpen by hand.) All that you we will discuss a bit later.)
should have to do is a little honing and Stones should be kept lubricated with
stropping. thin machine oil, or even a 50:50 mixture of
Some by the way, swear by a
carvers, machine oil and kerosene. This coating
hollow-ground edge, one that repeats the should be wiped off and replaced when it
curvature of small-diameter grinding
a turns grey and gummy from included
wheel, the sort of edge that is exaggerated metal particles. Periodically, also, natural
in a straight razor. They claim that this stones should be washed with benzine or
makes honing and whetting easier because gasoline, or boiled in water containing a

SHARPENING TOOLS 25
 WHE.TTING
& HONING

LINl ,f llfcHT

C STROPPING

WHITTIN6. HONING * STROPPINS A GOUGE

INNER BEVEL
F FIRMER WHITTtNt, HONING FIRMER 4TROPMN0
G 0F\
I
USE Of SUP ON
TIP
SHORT- BINT 60064

HONING INNER BEVEL

I
IN GOOG6

HONE OFF SHARP \l

SLOT IN STROP

h' V-TOOl OUT

1 SIDE BEVEL
IHNIR BEVEL
CORNER RELIEF V TIP HOOK m V/-TQ01 REMOVAL 0rF CENTER

Fig. 19. Sharpening methods.

soda. This lifts out soaked-in oil and

little Testing sharpness
grit.The manufactured stones are different To SHARPEN A knife, I use a rotary or figure-
in structure, and can be cleaned just by eight motion (A), (Fig.19), bearing down a

warming them in an oven, then wiping bitharder as the edge is moving forward
them off; the heating causes the oil to exude and lifting the handle a bit for part of the
and bring the grit with it. time to be sure I touch up the tip, which

26 SHARP TOOLS ARE VITAL

usually dulls first. Unless the knife is very or rounded at the outside corners. This en-
dull, afew swirls on the hone should do it, sures cleaner cuts. However, some carvers
followed by stropping. (Some of the time, prefer to ease the corners a little to reduce
unless the wood is very soft, I even skip the their tendency to catch along an inner an-
strop.) gle. I don't; them square, unless I
I like
Sharpness can be tested by trying the make a real rounded bullnose to use the
edge on a fingernail or on paper it should — firmer as a flat gouge. Note the corner-relief
stick on the former and slice the latter when trick in (I) — it may help,
drawn across (B), and any variation in the The parting or V-tool is a special problem
sticking or cutting rate will show dull or in —
sharpening which is why many neo-
nicked spots. Test sharpness on a piece
tip phyte carvers do not or cannot use it well,
of soft wood. Then the blade is drawn for a Inevitably, the lower point of the "V" will be
stroke or two over each side of the strop, slightly thicker than the side walls, both
which for knife-stropping is usually on two because of the shape itself and because a
sides of a paddle. Watch how a barber turns slight curvature will be left inside in man-
the razor over heel-first at the end of a ufacture. Thus, when the tool is sharp-
stroke — it saves a second or two. ened, there is a tendency for a small tit to
Carving chisels are sharpened in much form at the V-bottom (J). Either one side or
the same way, particularly the firmer (D). the other will have a small indentation near
However, because the gouge edge is the bottom because of manufacturing inac-
rounded, must be rolled as it goes over
it curacies or because you have been a bit too
the stone, so all parts of the edge are stoned enthusiastic with a right-angle slip or stone
uniformly. This is tricky. Some
do it carvers on the inside. If the edge is square and
by sliding the tool sidewise (E), others do it sharp, as it should be, the tit can be re-
by a more difficult straight push along the moved by a bit of honing outside (J) as well
stone, rotating the gouge as it moves for- as inside —
and you will have one of the
ward. Too much roll will bullnose or round most versatile chisels in your kit.
the corners; too little will leave them dull so All this is merely an outline of the intri-
they tear the wood. Dullness in an area may cacies of sharpening, but it should help to
be seen as a line of light (F), a reflection keep you from the habit of idle whacking or
from a flat surface, along the edge. mistreatment of a tool while carving. It also
Because all sharpening is done from the helps to explain why so many carvers, hy-
outer side, a wire edge or burr forms on the perconscious of time as Americans are,
inside; it can be felt with the fingernail. It have gone to mechanical sharpening, whet-
must be removed by passing a slip through ting and honing on sanding belts or buffing
(G), adjusting the passes so the entire inner wheels, or even shaped wheels. There is
edge is covered. The same operation is danger that these methods will result in
done in stropping with a piece of folded bullnosed tools, but many carvers do not
leather (H). Some carvers believe in making mind slight radii at inner edges and on flat
a very small bevel on the inside as well (G), surfaces of carvings, although they do take
to relieve drag.The tool can be tested with a away some of the crispness of the carving,
fingernail as with the knife or by trying it on There are a number of tricks to sharpen-
a piece of soft wood. ing. Several are shown in Fig. 18. In addi-
Note the sketches in (E); the edge of a tool tion, makers of stones, such as Norton, fre-
should be square, not hollow in the middle quently provided detailed instructions.

(More on sharpening tools in the appendix)

SHARPENING METHODS 27
 The Right Size

What should a carving be?

size customed to the soft curves in the faces and
In most cases, there is no real reason why a figures of people we know, not hard lines.
carving must be of a particular size, unless A sculptor uses a live model or good pic-
it is part of an assembly. Size is usually tures of his subject; even a tyro must do the
dictatedby other factors, like the available same if his design is to be believable. You
wood, convenience in carving, or the size of must do your homework!
the tools available. A miniature can be So: Be sure you haven't selected a size
harder to carve than a larger piece, simply your tools, or
that has details too small for
because your tools are too large, or the your skill, and does not include ele-
that it

amount of detail you plan to include is too ments that your hand, and your eye, cannot
great for the grain or texture of the wood. execute. Be sure the wood you have chosen
Further, a miniature is hard and dangerous is sufficiently dense and fine-grained for

to handle, as well as fragile. Similarly, a the detail you plan to include, and that the
piece that is overly large adds to the prob- grain is not so prominent that it will over-
lems of handling and removal of excess power the detail, or distort the appearance
—
wood you may find it difficult to hold the of the entire design. And, at least initially,
work as well as find a place to display it don't make hard to
the piece so big that it is

when completed. handle or requires excessive waste removal

The patterns in this book can be enlarged before you can actually carve. Particularly
as desired by any of the several methods in 3D carving, you may have to spend half
described here (see Figs. 20, 21, 22); only in your time getting unwanted wood out of
rare instances is it practical to reduce size the way before you can begin the interest-
and retain all the detail shown. As a general —
ing part of the work the actual shaping of
rule, it is advisable to reduce, rather than the form. I must, in all fairness, point out
increase, detail; it is a tendency, particularly that the more nearly the design fits the
for whittlers, to include so much detail that available wood, the less waste you have to
it tends to overpower the subject itself. remove (and, in a sense, the less wood you
What you are seeking is an image of a bear, waste). Also, if you plan to sell the carving,
not a texture that suggests a bearskin coat; a larger carving generally commands a
or a rhinoceros, not a complex pattern of higher price, even though it may require
plates and wrinkles. A carving should be less work. This thinking even affects inex-
readily identifiable, unless you intend it as perienced carvers, who will quote a lower
a puzzle. If a portrait of a person includes price for a work of smaller size and find to —
too much prominent detail, we are imme- their chagrin that the time and effort in-
diately conscious of it, because we are ac- volved are much the same.

28 THE RIGHT SIZE

 .

'/&'
square?) y^ squares

Fig. 20.

Fig. 21.

Plastic er cardboard

square

METHOD «f SQUARES
To double size, place a

^8 qrid oxeroriqinal &

copy square by square

ond ^"qnd. For triple

Ordinal

POlNT-to- POINT
un.us* *qr. ,
c.
„
^ ^^ Uwhhall WaU me-ftlWlO
Three methods of enlarging.
METHOD
To double j|Z«.,doubta Unqih of each, pr

of (dimensions whentransferred from

JftSlOOdr
original to copy, all measured Trom
v« fere, nee side & bottomlines. Connect

located points & faif-in linas.

?
Rubber band©
ink mark tyof
pin- pencil distdno
How to make for triple iiil.
the drawing fit the wood 'riqina i
Copy
Very often, the design you want to use
doesn't quite fit the wood, usually because
the design is too small. It may be sensible to
design the piece to fit the wood, rather than
RUBBER-BAND ENLARGING
seek out or assemble a suitable blank. If Approximate locations & blank vi.es
to
you use commercial wood, the thickness is tan be. obtained tlnis way. Shown is jX.

often a controlling factor. easy to

It may be Fig. 22.

get the necessary profile dimensions, but

the associated thickness may necessitate Imust mention other factors in selecting
the gluing of several 1- or 2-in (2.5- or 5-cm) size: What is to be done with the piece

pieces (nowadays usually 34 or IV2 in [1.9 or when completed? Is it destined for a par-
3.8 cm] as planed) to get the needed third ticular location, or is it going to take up
dimension more houseroom and be in the way if large?
Another factor in selecting size is to con- What sizes of tools have you? How steady is
sider whether you plan to use tools or just a your hand and how good your eye?
knife. Whittling is most comfortable with In these mechanized days, it is easy to
hand-sized pieces, of course, while wood- make direct (same-size) copies on a Xerox-
carving is easier on larger ones, even heroic type machine, but the old photostat ma-
sizes, because the work need not be an- chine, which was capable of enlarging or
chored so securely if it is large. reducing is less widely available except in

SIZING 29
 For transferring dimensions

Fig. 23.

PROPORTIONING DIVIDERS

Both these devices cante r^ade

{rom strips o* purchased &,&*c ad-

justable for various ratios.

Fig. 24.
PANTOGRAPH

art studios, which also often have photo- block with the pencil and stretch the band
graphic enlargers. If you can take, or have as you draw to keep the ink line aligned
taken, a negative or positive of the drawing, with the lines of the sketch. (This is much
you can either have a print made of proper more difficult to describe than it is to do.)
size, or put the negative in an enlarger and (Fig. 22)
sketch the outlines to size, either on a sheet For triple size, the ink mark should be at

of paper or directly on the wood. Or you one-third the distance from tack to pencil,
can make a rephotograph and project it and so on. For any enlargement, in fact, all
onto the wood. For three-dimensional carv- you need is the ratio. Thus, for V/i scale,
ings, this is really all you need: a guide to divide the rubber-band length by 3 and put
saw away waste wood. the ink mark at 2; for 2Vi scale, divide the
But let's say none of the above is avail- band length by 4Vi and put the ink mark at
able, and you have a two-view sketch that 2. This method is in fact a crude pan-

must be made double size. For a rough tograph, which most of us do not have.
shape, the simplest method is to take a If higher accuracy is necessary, you can

rubber or elastic band that is a couple of make a pantograph, or buy one. To be

inches longer than the combined width of useful,it should be made quite accurately. I

the wider sketch and the wood on which it have found it easier to transfer dimensions
is to be traced. (If you haven't one band that by one of two methods.
long, link several together.) Tie a pencil at
one end of the band and make a small loop Enlarging by squares
for a thumbtack at the other. Mark with ink and point-to-point
a line one-half the distance from the tack to The traditional method of enlarging is by
the pencil. Then tape the sketch towards the method of squares. Draw a grid of Vs-in
the left edge of a large breadboard or other (3.2 mm) squares on transparent paper,
flat surface that can take a thumbtack. Put larger than the original sketch you have.
the piece of wood beside it on the right. Set Draw a similar grid on the wood blank or on
the thumbtack into the baseboard at the a plain sheet of paper, butmake the squares
left, mark on the band is just
so the ink as much larger as you need, that is, for
short of the closest line on the sketch. Now double size use Vi-in (6.4 mm) squares, for
stretch the band so the ink mark aligns with triple size %-in (9.6 mm) squares. Now lay
a point on the sketch, and move the wood the transparent grid over the sketch and
blank until the pencil point is on the corre- copy the design on the block square by
sponding point on its surface. Draw on the square. Save the grid, by the way; it can be

30 THE RIGHT SIZE

 —
used over and over even on good sil- If the subject is large or animate and you
houette photographs of a subject and is — want to make a reduced sketch, a series of
particularly useful in laying out relief carv- photographs from the four points of the
ings, where precise outlines are necessary. compass is helpful. Or you can make or
(Fig. 20) procure proportioning dividers which
I lose my place when using that system, sculptors use. These are simply double-en-
and I have some competence at drawing, so ded dividers which can be set so that a
I use the point-to-point method. (Fig. 21) I dimension measured at one end will be re-
provide a base and side line on the original, duced or enlarged by the desired percent-
either by drawing or by taping an L-shaped age at the other. (Fig. 23)
cardboard or paper square on it as For a rough approximation blank
of
sketched. Then I draw a similar square pair shape, the simplest method is to use a pan-
of lines on the wood or a sheet of paper. tograph (Fig. 24). Pantographs are now
Prominent elements of the original are lo- commercially available, but are difficult to
cated on the copy by measuring their loca- use except from flat surface to flat surface,
tion with relation to the two faces of the and they are of course limited in capacity.
square, and transferring these dimensions, They can be used to reduce size by inter-
multiplied by the desired enlargement, to changing stylus and pencil. The rubber-
the board or other copy. Thus, if an ear on band method is cheaper and simpler, but
an animal is 3 in (7.6 cm) up from the base less accurate.

and 2 in (5.1 cm) in from the side, and the If the original is three-dimensional and
copy is to be V/i times the original, the there is no time to take photos, you must
dimensions are transferred as 4'/2 in (11.4 use the proportioning dividers or calipers
cm) up and 3 in (7.6 cm) in from the side. in transferring dimensions. (They can, by

Locate as many such key points as you con- the way, also be used in the point-to-point
sider necessary, then sketch in the enlarged method to avoid the computation if the en-
outline, as a child does in following the largement is some odd ratio.)
numbered dots in the comic pages. This
method I find to be accurate and faster for
me— simple arithmetic is my dish.

ENLARGING METHODS 31
 —

What Wood to Use

When early man developed his first crude heaviest twice the weight of the lightest.
cutting edges he found wood to be an And none of these is lauan or lauanda, now
amenable and plentiful material and soon the usual surface veneer of "mahogany"
discovered differences in the characteris- plywood, or primavera, a white wood
tics of the various species available. There which when stained looks like good ma-
was so much work involved in his shap- hogany. The best mahogany is still that
ing of increasingly sophisticated things from Honduras, which is fine-grained al-
whether they were tools, idols or toys that — though relatively soft. Cuban mahogany is
he had to learn which wood was good and dense and varies in hardness; South Amer-
which was not, depending upon the final ican varieties tend to be grainy and splinter
purpose of the piece. easily; Philippine commonly available is

In rural and remote areas this is still true coarse and the poorest of the lot.

to an extent, although in general we buy So much for mahogany, which is so fa-

lumber from far away for local structures miliar because of its long record of use as a
and usage and although the relative impor- furniture wood. The best wood to start with
tance of wood as a material has been greatly is probably basswood, known in some
reduced. Thus, the typical modern whittler areas as bee tree, but similar to European
or woodcarver must in most cases use what linden, followed fairly closely in popularity
is whether or not it is ideal
readily available, by American white pine (which tends to
for his purposes. In other words, most of us split) and imported Indonesian jelutong.

carve lumber rather than trees and are lim- These tend to be soft, readily carved and
ited towoods that are commercial locally. sanded, and straight-grained with few
Furthermore, even in remote areas, a per- knots or other areas of difficulty. Carvings
wood may be discarded
fectly suitable local made from them will have little distinction
in favor ofsomething that must be bought inmost cases. Because of their lifeless color
even sight unseen from a catalogue; the and lack of any distinctive grain, they need
resulting work is, therefore, limited by the tobe tinted with stains, acrylic or oil paints,
particular block bought. although the common tendency to stain
One example that leaps to mind
"ma- is them a standard color or paint them with
hogany," a word used to describe an in- solid colors is unfortunate. Of the so-called
creasingly divergent group of imported and white pines, ponderosa is good ifyou avoid
expensive woods. There are mahoganies the strongly colored pieces. Sugar pine
from Africa, Mexico, Cuba, Central and (commonly called "white pine") is a bit
South America, and the Philippines. I have more porous. Avoid yellow pine, which is
six samples from the Philippines, all pre- hard, often knotty, and resinous.
sumably mahogany, that vary from almost Among other soft woods are poplar,
white to a darkish red-brown, with the which bruises easily and tends to grip tools,

32 WHAT WOOD TO USE

Fig. 25 (right). Cedar tends to crush unless tools are very sharp,
but this panel was worth the effort. The panel itself is a 1 x 5M>
x 10-in (2.5 x 14 x 25.4-cm) piece of Western red cedar, from a
log blasted to a dark grey in the Mount St. Helens eruption in
1981. Inlaid are three pieces of Virginia cedar, natural in color
but 8,500 years old, plus or minus 500 years, according to a
carbon-14 test. About the third oldest piece of wood known, the
tree was found in a marl pit in Ohio several years ago.

Fig. 26 (above). Wood that is bad for the

cabinetmaker may be good for the carver. This piece
of spalted (partially dry-rotted) curly broadleaf
maple makes a very intriguing stylized nighthawk
that is 2V4 x 4 x 9 in (6.4 x 10.2 x 22.9 cm).

Black walnut, the best American

Fig. 27 (right).
carving wood, will support a great deal of detail but
tends to be dark, as this snapshot of a coat of arms I
recently carved shows.

so hard to cut smoothly; cedar (Fig. 25)

is

which is also easy to cut but bruises and has

a distinctive reddish color; willow, which
has a tendency to split; cypress, which does
not wear well; and alder, from the West
Coast, usually carved green because the
carving is easier and the wood does not viously mentioned, tend to check and are
check as it dries, at least in small pieces. subject to insect attack and warpage, but
Slightly harder are butternut and, quite re- they will support more detail and under-
cently, paulownia, which are light tan with cutting, take a better finish and have a grain
darker grain. that does not interfere with carving and a
color that makes painting unnecessary.
Whittlers' woods Among them are pear, pecan, cherry, apple
Many whittlers have always used local and black walnut. Cherry and black walnut
woods, particularly the fruit and nut good, the latter
(Fig. 27) are particularly
woods. All are harder than those pre- probably being the best American carving

WHITTLERS' WOODS 33
wood. It has a fine, tough grain and good
color and finishes beautifully, but may turn
quite dark
a
if

disadvantage
oiled. (This
as the
may be as much of
whiteness of
WfcWfE^ A
basswood or holly.)
Old-time whittlers used whatever they
had: willow for whistles, fruit woods for
small figures, ash or hickory for tool han-
dles, and so on. Nowadays, most whittlers
begin with woods such as white pine,
basswood and jelutong (a recent import
from Indonesia) that are fairly soft and
readily available at the local lumberyard.

Local availability
The woodcarver, unlike the whittler,
tends to use harder woods like cherry and
black walnut, even oak and maple, or im-
ports like mahogany, which will support
more detail, take a better finish, and have
some grain to give them variety. All of these
are much harder to cut than pine or Fig. 28. One of the distinctive African woods is
basswood, but that is not particularly im- vermilion or amboina. It is a brilliant dark red in
color. I carved this panel, about 12 x 19 in (30.5 x
portant when you use chisels.
48.3 cm), in vermilion to go outside a door on a
There is also considerable variety in the modern brown-stained house. The wood is
woods used, because of their local avail- spectacular when finished, but tends to splinter
ability as trees. Thus, red alder and myrtle when carved to such detail as this.
are carved on the West Coast, ironwood
and osage orange (both dense and quite
hard but prone to splitting) in the South-
west, buckeye and basswood in the North-
east, walnut in the Central States, tupelo stringy but can be carved quite successfully.
(cottonwood) and cypress among others in Eastern white oak is inherently strong and
the South. Eastern mountaineers use holly will take detail, but should be carved with
and fruit and nut woods like pecan. South tools. Swamp or red oak has a very promi-
of the border, Mexican carvers work an end- nent grain and coarse structure: avoid it.
less variety of woods because Mexico has Dogwood is very dense and hard and can
more varieties of wood than any other stand shock without spitting, but it is diffi-
country, some 2,800. cult to carve. Holly, our whitest wood, is

There are many woods used for carving hard and tends to check, but it holds detail
in the areas where they grow, like buckeye, well. You may know or have heard of oth-

cypress, cottonwood, poplar (gum), ers; the best advice I can give is to try them.

chestnut, willow, birch, maple, butternut I have carved macadamia from Hawaii, ker-

and myrtle. Maple is much harder than the osene, garamut and kwila from the
others, but takes a good finish and sup- Trobriand Islands just for tryouts.
ports detail. Look out for warping and split-
ting with chestnut. Hickory, sycamore, Imported woods
beech and magnolia are hard to cut and Among the imports, rosewood, which
good primarily for shallow carving. Ash is comes from many Latin-American coun-

34 WHAT WOOD TO USE

 Fig. 30.Bovine group for a Nativity scene was
whittled from white pine and antiqued with sal-
ammoniac stain. The bull is 3 in (8 cm) long. Better
quality figures can be carved from pecan or holly
and not tinted.

expensive wood of all, a delicate pink-white

to red in color. If you can afford it —
and find
—
it it is interesting to work. But, in the end,

the choice must return to what you can get

and the effect you want to create.
Fig. 29.This pillar from Bali was exhibited at the Many woods are now imported in
New York World's Fair in 1939. It is teak, with the lumber that will cut into carving-size blocks
carving of Siva on top made of blinding wood (also
called blind-my-eyes in Australia because of its
or panels. They tend, however, to be rela-
poisonous tendencies). tively expensive, particularly in recent
years. Among them, my favorite, par-
ticularly for panels, is teak (Fig. 29), from
Thailand or Burma, which will support de-
tries as well as Africa, varies widely in color tail, does not warp appreciably, and is im-

from rosy red to brown; I have a Mexican pervious to water, rot and insect attack. It
piece that includes suggestions of purple can be carved easily with chisels and mal-
and green. It is hard, but not as hard as let, but does often contain silica, which

cocobola or lignum vitae. These woods are takes the edge off tools despite the decep-
very expensive, and should not be used for tive smoothness of cutting created by the oil
casual carvings. Most of the African woods, in the wood. This is true also of some kinds
like beef, bubinga, zebra, thuya and the of rosewood, which (like mahogany) can
like, tend to split and are a nuisance to come from many sources and vary widely
carve. This is true of purpleheart, green- in color and characteristics. I have pieces
heart (from Brazil), and vermilion (Fig. 28) ranging from red to dark reddish-brown
as well, but these three woods have dis- and even containing purple, green and
tinctive colors and therefore make fine pen- yellow. Chinese teak is not brown, but red
dants, for example. There are dozens of and harsh-grained, which is why the Chi-
other woods, some with extremely elabo- nese enamelled it black and most Amer-
rate "figure" (that may interfere with your icans think of teak as a shiny black wood,
carving) like harewood and satinwood, for just as they assume that all black African
example. Then there is pink ivory, the most carvings are ebony.

IMPORTED WOODS 35
 ~ cn -

Fig. 31. Grinling Gibbons

was the most famous of
English carvers and the
great worker in lime. His
floral swags have been
popular for 400 years.

Lime (Fig. 31) and boxwood, both used to split and splinter, among other things.
extensively in Europe (and boxwood in Lacewood, satinwood and sandalwood are
China), are not readily available in the U.S. scarce nowadays, but can be useful. There
Both are hard and good cutting wood. Eu- are also such woods as zebrawood, beau-
ropean linden is like our bass wood. English tiful in grain but as hard to carve as Amer-

sycamore harewood when cut and

(called ican redwood or cypress because of vari-
stained in a particular way) carves well, and ation in hardness between winter and
is white like our holly and available in wider summer wood.
boards. There are also available such woods Popular among sculptors are such woods
as English and Austrian oak, both more as ebony (Fig. 32), cocobolo, and lignum
dense and finer-grained than American vitae, allvery hard but capable of fine fin-
oaks, hence much used in religious carv- ishing. (The latter two are called "iron-
ing. English walnut has too much "figure" wood" locally in Mexico because they sink
for good carving usually; Italian walnut has in water, and may also be called guayacan.)
a fine texture, close grain and cuts like En- Ebony is really another general term, be-
glish oak. Others surface occasionally, but cause the wood comes from Africa, India,
Europe has fewer woods than we do, par- Indonesia (particularly the Celebes now —
ticularly if the 2,800 varieties growing in Sulawesi), Ceylon (now Sri Lanka) and
Mexico are included. South and Central America. It varies in
Many woods have been imported from color and marking from solid black (Gabon
Africa in recent years, mostly for veneers or and New Guinea) to dark brown with black
specialty uses like pool cues and arrows. striping (macassar from Sulawesi and cala-
Others have been imported from Central mander from Sri Lanka), and black with
and South America. All are expensive, hard lighter striping (striped or swirled ebony
to find and finance in suitably sized pieces, from New Guinea). All these woods, as
and tend to be more trouble than they are well as rosewood and mahogany, can create
worth unless you are after a special color, lung-inflammatory dust when sanded.
graining or other effect. I have carved most I have mentioned pink ivorywood from

of them in making up fish and dinosaur Africa which is the world's most expensive
mobiles each with 16 or more units of a wood, something like $300 a pound at this
different wood, but have found thev tend writing. It has been described, apoc-

36 WHAT WOOD TO USE

 ebony is becoming very scarce because it is being
Fig. 32 (left). Real
carved up much faster than it can grow. Bali, for example, must
import it from a rapidly diminishing supply in the Celebes
(Sulawesi), largely because so much was used on carvings like this
one, about 4 feet (1.2 m) tall.

Fig. 33 (above). These two lengths of Mexican "bianco" about 2 in

(5.1 cm) in diameter, I carved in the images of the old Aztec gods. It
is very much like white pine.

ryphally, I think, as the private wood of the much information on available woods.
Zulu kings; anyone else found with it was Considering, however, that there are some-
beheaded. It varies from pinkish white to thing like 7,000 species of wood in the
dark pink, is relatively hard and tends to world, identifying the odd foreign piece is

split, and in my opinion is more a curiosity almost hopeless.

than a useful carving wood. I have a couple Basically, the easiest way to determine
of pieces and use it on occasion for jewelry. what wood to use initially is to try it with
If you have a particular interest in identi- the tools you intend to use. Many carvers
fying various species, beware of such coun- and whittlers simply buy wood at the local
tries as Mexico. One day in Oaxaca, I visited yard, or even send away for blanks to round
half a dozen one-man carpenter shops up and shape, because that's easier and less
within blocks of each other. In several I "messy" and requires no extra tools.
found woods and got samples with
exotic Finally, start with familiar and easy
their localnames written on. Each car- woods and work up to the others. The ex-
penter had a different name for the same otic woods make wonderful carvings, but
wood, and there is no publication that be- take much in sweat, blood and tears. I have
gins to identify them. There are good guide indicated, piece by piece, my choice of
books in the United States, as well as the wood —or that of other carvers
through- —
International Wood Collectors Society (cur- out this book. Also, regardless of wood,
rent address, Drawer B, Main St.,Chau- avoid a blank with knots, flaws or checks if
mont, N.Y. 13622) that publishes a monthly you can. Knots take the edge off tools and
Bulletin (retitled World of Wood) containing may fall out later. Both knots and flaws re-

IMPORTED WOODS 37
 Fig. 34 (left). Windswept, carved in a section of
branch distorted by a vine. It is about 15 in (38 cm)
tall, with actual carving only around the face.

quire some Checks have a

skill at finishing.

disconcerting way of opening and closing

with humidity changes, and filling a check
to hide it may cause pressure that will crack
the piece later.

"Bad" wood can be beautiful

Most cabinetmakers reject or repair any
flawed or abnormal section of wood. Wood-
carvers, however, can often capitalize on
flaws such as knots and dry rot, or holes,
lines and other deformities caused by in-
sects or worms, to say nothing of unusual
root or driftwood shapes. Some years ago, I

carved animals in a low-relief spiral around

a section of apple-tree trunk, exploiting nat-
ural projections, and got amuch more dra-
matic effect than if I'd cut them away. I have
since carved sections of trunks distorted by
vines or other interferences, done a "bug
tree" with designs around worm holes and
rotted spots,and made cups and bowls of
apple burls and sculptures of roots and
cypress knees. I even have one client who
intentionally selected boards with knots for
panels!
Study with an unusual shape or
a piece
some intriguing defect; the result may be
much more than salvage. I have selected
several examples. One is a statuette from a
vine-distorted branch (Fig. 34), another a
lion with mane created by insect infestation
of a South American tree (Fig. 35), and the
third is a toad (Fig. 36) carved in dry-rotted,
curly broadleaf maple, along with two
cypress knees converted into statuettes
(Figs. 37 and 38).
Pieces of bough like the lion's head are
sold in Latin-American markets; they are
found by Indians who sometimes carve

Lion head carved on a scrap of Chilean

Fig. 35 (left).
or Peruvian wood from
a native market. Natives say
such abnormal growth is caused by insects or
fungus infection.

38 WHAT WOOD TO USE

Fig. 36 (right).Toad atop a columnar base, all of
spalted curly broadleaf maple. The toad is about 2
in (5.1 cm) high, on a spectacularly patterned 3V4 x
4 x 5-in (8.3 x 10 x 13-cm) base. Eyes are glass.

Fig. 37 (above). Madonna and Child carved in a

cypress knee, about 15 in (38 cm) tall, with
hammered-copper base strap. Again, the only
carving is at the top. Knees have brown inner bark
atop white growth wood, so contrast is marked.

Fig. 38 (right). Centaur and oread carved from a

cypress knee. The figure is about 8 in (20 cm) tall.

'BAD WOOD" 39
them into Indian heads, with American from apparently sound to noticeably soft-
Sioux headdresses from the distorted ened and crumbly. If the wood is dried, the
areas, and other designs, depending upon decay stops; but the fungi can remain dor-
shape. In a sense, this is the same idea as mant for years. Thus, if the wood again
that of American carvers of driftwood, dia- achieves a moisture content of 20 percent or
mond willow and rotted wood. so, the fungi may develop again and con-
The toad in Fig. 36 was suggested by the tinue the process. This dry rot cannot occur
shape of the piece I was given, and by the except in the presence of moisture; thus, it

beauty of the wood itself. The top had a is really wet rot.
slope like a seated frog or toad, but the
patterning of the wood definitely sug- You can carve
gested a warty toad rather than a smooth thick bark
frog; the greyed creamy color also sup- The essential here is a tree that produces a
ported this choice. While Americans collect fairly thick bark, such as the catalpa, black

frogs in many materials, and abhor toads, cottonwood or ponderosa pine. There are
Orientals consider toads lucky. I have a also harder and denser barks, like that of
toad carved cryptomeria (Japanese
in the pochote in Mexico, which is dense
"cedar" finished by sandblasting to make enough to use as patterns for casting pre-
growth rings stand out), a netsuke in ivory cious metals, or show a village facade in
—
from Japan these were once used as thong miniature. I first encountered such work
buttons on purse strings and a red-stone — many years ago in Mexico, and found the
toad from China, atop a stamp with my carving of ponderosa pine bark more re-
name in Chinese characters and the symbol cently there. (Figs. 39, 40)
with which I sign carvings. Ponderosa is carved by the Tarahumara
This kind of wood is often so beautiful in Indians, a primitive tribe living in the state
itself that carving detracts rather then of Chihuahua, Mexico, whose idea of sport
helps. I felt this was true of the maple block includes running down a deer for food.
used for the toad carving, so most of the Their pine carvings are crude, though they
surface uncarved and serves as a pillar or
is do make quite good guitars and violins! I
base. I finished the toad with satin varnish, got some of the bark and found I could
and the base with gloss to stress its ap- make complete carving in 20 min-
a fairly
pearance. The varnish also reinforces the utes or a half hour because the bark is so
areas of the wood crumble at a
that tend to soft. It is laminated and quite brittle, but is
touch. I from
originally carved bulging eyes more satisfactory for an exercise wood than
the wood, but replaced them with small balsa, for example, and far less expensive
grey-pearl-finished glass pendants for because it's free. Catalpa bark is similar, but
more gleam. Black-enamel spots were pochote is dense, dark red with a greyed
painted on for pupils, and then the pen- exterior, and is not at all brittle nor noticea-
dants set in so only oval shapes are visible. bly laminar when carved. Also, it tends to
These pendants, incidentally, can be found be in "domes" rather than strips, and has an
at any notions store, and cost less by the inherent design that frames a carving.
dozen than would one set of glass eyes. Bark can be finished with sprayed matte
Dry-rotted wood, incidentally, is wood or satin varnish to increase surface strength
that has been infected by decay fungi to an and combat the tendency to crumble.
extent sufficient to cause discoloration, Nebraska carvers, who cut faces in the solid
creating in the better pieces a marbled ap- wood of a slab beneath catalpa bark, use a
pearance on smooth surfaces. Because de- heavy and shiny multi-coat, plastic-based
terioration of the cell structure by the fungi finish to contrast with the rough bark exte-
is progressive, condition of the wood varies rior.

40 WHAT WOOD TO USE

Fig. 39. At left is a profile, in
the middle the Pope wearing
a fan-dancer headdress, as he
did during part of his visit to
Mexico, and at right a frontal
face. All were carved in pine
bark by the author in 1979,
during a Mexican visit.

Fig. 40 (right).Female figure, with headdress, and

triple god faces carved in ponderosa-pine bark by a
Tarahumara woman, about 1979. The taller figure is
13 in (33 cm) long.

Try carving nuts, pits and gourds

Various nuts are carved all over the
world, because they provide a basic shape
and a woody texture. One of the first things
I learned to carve was a peach pit, but it was

many years later that I realized it was also

possible to carve plum and apricot pits, co-
conut shell and hard-shelled gourds. In re-
cent years, I have also seen carved avocado
pits (Israel), olive pits (China), nutmeg and
walnut shell (Mexico), hickory nuts and
butternuts (USA) and many kinds of hard
seeds used for beads, particularly in the
Pacific Islands.
Perhaps the most unusual carved nuts
come from an area in Ecuador. They are
from a palm, the tagua, which grows there
and in Colombia. These nuts are slightly
smaller and flatter than hen's eggs, with
brown skins and hard white meat so — cover —a pity—but the designs can be done
hard, in fact, that it is called vegetable ivory in holly or other dense woods.
and even carves like the real thing. Designs My general experience with carving
range from pipes to chess sets and elabo- nuts, pits and gourds has shown all of them
rate assemblies such as the skeleton in Fig. to be brittle and hard. Chips tend to break
41. The nut is not available commercially, away rather than cut, and carving is a slow
except as carved, as nearly as I can dis- process that requires frequent resharpen-

BARK, NUTS, PITS AND GOURDS 41

Fig. 41. Tagua-nut skeleton from Ecuador is an assembly of 16
pieces, including a turned base. The scythe blade is also tagua,
the handle a wood dowel. The carving, about 8 in (20 cm) tall, is

made for the Day of the Dead, November 1, like the American
Halloween the night before.

Fig. 42 (left). Peach-

pit assemblies from
Chile involve at least
ten shapes of
familiar animals and
birds. Here are a
rabbit and a swan, of
pieces glued
together and tinted.

ing of tools. But finished pieces will take a

good finish and can usually be stained or
painted.
The carved gourds of Peru are par-
ticularly noted for intricacy of detail in the
shallow carved and painted surfaces, usu-
ally in brown and black only. The tagua
nuts are often in full color, painted expertly
with oils, and the heads are accurate like-
nesses. The 2-in (5.1-cm) long "olive" pits
that formerly came from China were far
more intricate, however — I found one
carved as a sampan, with window shutters
Fig. 43. Older tagua carvings tended to be
opened and showed images
that actually
unpainted, as shown by these examples. Two of the
behind them, all from a shell wall under Vs five are heads of Jesus and two are Atahualpa, last
Inca emperor. The fifth, at right, is a Spaniard.

42 WHAT WOOD TO USE

in (3.2 mm) thick! These were undoubtedly glued together from sections of peach pits.
the work of ivory carvers. And pendants and buttons sawed from
Work like almost unknown to
this is hickory nuts have been around for years.
Americans, even tourists, because these Start with them or with peach or nectarine
pieces are produced in small quantities and pits, which are readily available. A knife is
are not generally available in tourist shops. really all the equipment you need for

The assembly of parts made from separate peach-pit carving, plus a little imagination
nuts or other materials is also very unusual. to see what the surface convolutions sug-
In Mexico, walnut and coconut-shell seg- gest.
ments are assembled into various animals
as decorative units, some of which can be
opened to reveal scenes assembled from
paper and wood, painted. In Chile I
bits of
found about ten varieties of animal shapes

Figs. 44, 45 (right and below). Gourds are carved in

various Latin-American countries, but the most
elaborate come from Peru. Carving is surface
scratching, like scrimshaw, but deeper and done in
browns and blacks. This one, with a girl's head, is
about 7 in (18 cm) tall.

UaV\t-colof«d background filled with -ftrn-lika patterns

(More on nuts, pits and gourds in Appendix I)

NUTS, PITS AND GOURDS 43

 Some Finishing Suggestions

How about surface texture?

Woodcarvers are given to repeating the
old, old saying that many carvings are
ruined in the finishing. That is true, of
course, because many carvers use whatever
finish they have available or have used be-
fore, and their taste may be regrettably bad.
Cheap carvings, particularly from under-
developed countries, were frequently dou-
sed with shellac or cheap varnish, and
some American carvings were (and are) fin-
ished the same way, making them shine
like cheap furniture. This has encouraged
purists to use no finish whatsoever, or sim-
ply oil and wax, although this combination
is at times unsuitable as well, depending

upon wood, exposure, humidity and occa-

sional other factors, including insect in-
festation.
Some primitive carvers have felt their
way into much more specialized finishes of
many kinds, ranging from natural dyes to a
"secret" formulaused by a few carvers in "Mother and Child" is in
Fig. 46. Stylized
Haitiand which gives a head or bust a mahogany, about 12 in (30 cm) high, sandpapered
smooth and antiqued.
smooth but slightly dusty surface exactly
matching the complexion of some native
women. What many of these carvers are
actually striving for is not a finish, but a perhaps because the sculptor is more adept
texture that somehow simulates or suggests with sandpaper and riffler files than with
the natural. sharp-edged tools, or because the wood
Quality wood sculptures commonly have proves recalcitrant. The textured surface
one of two surface textures, either smooth may also be added after the carving, simply
and polished, which emphasizes the fig- as an allover pattern of small scallops that
ure, color and grain of the wood; or tool catch the light without having any rela-
marks, planes or surface patterns to em- tionship to the strokes actually used in cut-
phasize the carving or the figure itself. The ting and shaping.
low-gloss finish is by far the most common, Occasionally, artists break these patterns

44 SOME FINISHING SUGGESTIONS

Fig. 47 (below and This "Deer Dancer" was
right).
^n+(«rs 5tpariTc (jlued in
surface-textured with gouge
lines over a blocky (

silhouette. Texturing changes angle in stress areas.

The only untextured areas are the antlers, rattles,
and feet. The piece is 16 in (40 cm) tall.

F«a1ur«s sulfated, (j

but not detailed

fWacas-^oai-d
rattles- in ha

Surface skafxd,
then channelled
at skeickd

and strive for a surface that will have a

dramatic look or feel or create a particular
response of the figure to light, just as artists
in other media apply pigments with a pal-
ette knife or leave the tool marks or finger-
marks showing on a clay model. Some
carvers actually develop a surface finish
that eventually becomes a sort of personal
trademark and others simply drift into col-
oring their work out of simple frustration.
The pictured figures from Mexico, Bali, monious shape, the result being reminis-
New Guinea and Haiti illustrate the point. cent of many Balinese carvings.
"Mars," in carving the Haitian mother and In contrast, "Old Man of the Sea" ampli-
child (Fig. 46), relied upon the silhouette fied the erosion of a piece of driftwood into
for strength and design, so finished his a pattern of fillets which simultaneously
piece smooth, with many of the lines fading produces the effect of hair and frames the
into the body of the piece. He did not detail face (Fig. 48). More than half the area is thus
the features, the digits, or the musculature. textured, so light tends to bring out the
He was striving for a smooth, flowing, har- smooth surface of the face within a greyed

SURFACE TEXTURE 45
 23' high

"Old Man of the Sea" was carved in a

Fig. 48 (left).
greyed piece of driftwood. Hair and beard were
textured with V-grooves blunted at the bottom to
resemble fluter cuts.

Figs. 49, 50.Two versions of the Virgin of Soledad

(Mexico) are alike in the overall patterns in robe Fig. 50.

and skirt although one was textured with punches,

the other with knife cuts.
—
duced with stamps one a %-in (9.6-mm)
circle and others a %- and Vfc-in (9.6- and 3.2-
mm) straight line. The wood, like pine, is
soft and preserves the stamp pattern
clearly. The figure, overall, is only 8V2 in
or softer aureole of hair and beard. Pig- (21.6 cm) high. In the other figure, the pat-
ments have been rubbed in to add a bit of tern is incised.
color to lips, cheeks, teeth and eyes, but The two dancers, carved in Mexico City a
their effect is only to tint the grey wood score of years before acquired them, repre-
I

slightly. sent two of the traditional tribal dances of

The two Mexican Virgins of Soledad Mexico: one is the deer dance of Sonora
(Figs. 49 and 50) are much more primitive (Fig. 47), the other the feather or plume
than the preceding two figures. They have dance of Oaxaca (Fig. 51). Both dancers are
obviously been copied from earlier models, in animated poses, and the carver has con-
but have been stylized and interpreted as tributed to their animation by giving them
well. Crown, face, hands and flower are slightly blurred outlines and avoiding
modelled, but the rest of the figure is pri- sharp detail. As a result, they appear to be
marily silhouette. The robe surface, how- caught in motion, particularly the plume
ever, is textured to suggest the opulent em- dancer. The figures were rather carefully
broidery of the cloth robe. In one example, shaped, then the majority of each surface
the irregular pattern is painstakingly pro- —
was textured the deer dancer with parallel

46 SOME FINISHING SUGGESTIONS

 turtle*) ihtpad A
tKtp-m«rKcd

Cap«-b«<:k detention
donf with iNm

Fig. 51. "Feather Dancer" was carved by the same

and in mahogany. Face and hands
artist as Fig. 47,
are not detailed, and all but the cape and feet are
covered with small scallops.

channelling by a small gouge, the plume headdress, cape and apron, with the apron
dancer with scallops produced by a larger, practically blended into the lines of the
flatter gouge. Neither face is detailed, al- body. The cape, however, in real life or-
though the deer dancer's has a nose shape nately embroidered, is smoothed and pat-
and a fortuitous placement of channels to terned with stain. The headdress is reg-
suggest the mouth and eyes, both on the ularly patterned with larger gouge scallops
dancer and on the deer. Texturing covers to suggest rows of feathers, but has an es-
most of the body surfaces of the dancers, sentially smooth surface, while that of the
except for the feet (which are presumably real-life headdress is much rougher.
solidly supporting the figure), and a few This particular carver, by the way, used a
other details. In the deer dancer, these are finishing technique that preserved, but
the ears and horns of the deer head (this is partially obliterated, the lines of his carv-
an assumption on my part because I had to ing. He apparently poured melted beeswax
replace missing parts) and the gourd rattles over the entire surface, so that it congealed
(maracas) in the hands. The gouge lines are and collected in all the hollows. Over the
not all parallel, but in some cases suggest years, this clouded and collected dust, so it

lines of movement or of stress, as across the was necessary to scrape off larger ac-
shoulders and the chest. cumulations, then alternately heat and
The plume dancer wears the familiar wipe to get rid of most of it. No solvent

SURFACE TEXTURE 47
Figs. 52, 53.These trays suggest the variety of forms and treatments in woodenware. From Takamatsu they
are sanded smooth to show the fairly prominent grain. The circular tray (left) has an iris tinted with real
gold, the floral group on the square tray (right) is untinted. They are finished in clear lacquer, without
stain.

available would dissolve this hard wax as — effect of aging (we have done it by sand-
chemists who use hydrofluoric acid know, blasting), and has recently been "dis-
because they store it in beeswax bottles. covered" by tyro carvers. Another texturing
There are a number of other surface tex- technique is pyrography, used commonly
tures, like lining for hair, cross-hatching for by bird carvers to simulate the veining of
roughness, and so on. They are worthy of a feathers. A pyrographic needle can make
little thought and may give your work more the equivalent of veiner cuts with a dark-
real "polish" than can gloss varnish. brown surface burned on, and can be quite
There are many other aspects of textur-
ing, of course, including effects obtained by
utilizing the figure or grain of the wood
itself. In most cases, the carver positions his
work, or modifies his design, to take advan-
tage of surface irregularities or imperfec-
tions, like knots or color changes, or selects
the piece of wood because its shape sug-
gests the ultimate carving. In other cases,
the carver must adapt his design to the
shape of the available wood, so he makes a
virtue of necessity.
The Japanese have long used the grain in
stillanother way. They carve turtles,
badgers, frogs, toads, goldfish and drag-
ons in cryptomeria with alternating hard
(dark) and soft (lighter) stripes in the grain,
and then erode the soft wood so that the
surface has a series of ridges. Fig. 54.This textured tray with two gingko leaves is
The same
the famous red-lacquered kind from Kamakura. It
technique has been used in this countrv on can be cleaned with a damp cloth, and withstands
pine, redwood and cypress to create the moisture. It is one of many designs.

48 SOME FINISHING SUGGESTIONS

 —

dramatic in suggesting feathers, fur or long

hair on light-colored wood figures.

How much modelling and texturing?

In India, and in China to a lesser degree, it
was customary to cover the entire surface of
a woodcarving with decoration, par-
ticularly if it was a panel in relief. In Italy,
the tendency was to cover as much as 80
percent of the surface, but in other coun-
tries, this might be reduced to 30 percent or
less. The Maori and the Balinese also kept
surfaces busy, while the Seri Indians of
Tiburon carve a profile of the subject and
rely on the inherent beauty of the wood and
a relatively high polish to create the desired
effect.
Throughout the world of carving, there
have always been these variations in
amount of detail in form and finish, in col-
oring, polishing, toning, mounting. A com-
mon present-day question is whether or Fig. 55. This rectangular apricot tray has faint
not carved figures, particularly in soft tinting of the design, and is finished in clear
woods, should be painted, and if so, to lacquer, without stain.

what degree. Exhibitions differentiate be-

tween painted and unpainted figures, and becomes a matter of what the individual
in decoy shows the pieces are as much likes, as always has been, plus the dictates
it

paintings as they are carvings. But this was of fashion, local or worldwide.
also true in Egypt and Greece, where most Actually, the density, grain, color and
carvings, even in stone, were painted origi- other characteristics of the wood; the sub-
nally. In Indonesia, statues have been pro- jectand proposed treatment; the skill of the
vided with seasonal or festival costumes carver and the eventual disposition of the
which are changed regularly, and some of piece must all be considered from the be-
the ancients in Europe did the same thing. ginning if a happy marriage of modelling,
In many countries, careful carving of a sur- texture and finish is to be attained. If the
facewas followed by lacquering in color to wood has a strong figure and dense struc-
make the surface smooth again. Thus pre- ture, it will combat any texturing or color-
cedents can be found for whatever any par- ing, unless the coloring is opaque.
decides to do; the weight, if
ticular carver Many people once thought teak is black,
anywhere, being on the side of coloring. because the Chinese, in particular, lac-
Only in sculpture has color been banned in quered it to destroy the grain, and possibly
favor of the natural texture of the wood to suggest ebony. Grain may also distort
and even there the surface may be textured modelling lines and even a silhouette. I
in areas, and inconspicuous and artful tint- once carved an Arab stallion head in ma-
ing may be done. hogany which the grain enhanced the
in
Thus it is difficult to lay down rules about arch of the neck, and shortly thereafter a
amount of modelling or detail, texturing madonna in pine who wore a perpetual
and finishing. Authorities disagree at every grin because of a grain line passing through
level, as do artists and clients. It eventually the modelled mouth. (She had to be tinted.)

MODELLING AND TEXTURING 49

 Similarly, texturing can overpower the moisture content is likely to change for any
basic design or enhance it, depending upon reason after completion, checking will be
how it is done The very rough coat of a bear
. encouraged by cut lines, and the finish will
can be simulated either with flat planes or not stop it. If a piece is likely to be handled,
with veiner lines, but some of the most details and weak areas are likely to be dam-
dramatic bears I've seen are smooth and aged; and if the wood is light-colored, they
finished with a low gloss. will certainly pick up soiling. On the other
The best decoys have exact feathering hand, a table top to be covered by glass can
carved and painted and veined with a be quite intricate, because it is likely to be
pvrographic needle, but most bird sculp- inspected at close range. A carving to serve
tures show no texture whatsoever and as a screen is a natural subject for openwork
avoid the problems of eyes (glass inserts in (piercing), and the openwork may actually
—
decoys) and legs usually metal in painted help reduce the tendency to warp by equal-
birds —by not showing either at all. The izing humidity rapidly on the two faces.
emphasis in one case is realism, in the other To sum up: There are no rigid conven-
it is suggestion. Take your pick. tions about modelling and texturing. It ap-
My tendency, as a mechanic and engi- pears to be more acceptable, however, to
neer, is to over-detail, to blur the profile and use both in moderation, particularly on
surface by excessive modelling and textur- small carvings. Remember always that tex-
ing. Other carvers I know are too depen- turing tends to subdue, rather than accen-
dent upon files, rasps and sandpaper, or tuate, a surface. Color is usually best as thin
upon single-coat gloss finishes reminiscent tints which are more suggestive of the color
of cabinetmaking. Their efforts are directed than realistic and show the wood beneath.
towards obtaining precision one mark of a — Further, color is in most cases effective pri-
—
good piece of furniture and art, strength marily on soft and colorless woods with no
and individuality may be sacrificed in the decided grain, or where it is necessary to
process. (I am not making a case for the overcome the effect of grain, or if the fact
slapdash wood butcher, but simply warn- that it is a carving rather than a moulding or
ing that exactness can be overdone.) a cast form is unimportant.
There is little point in putting a great deal The shape and
possibilities of silhouette
of detail into a carving that will be displayed pierced carving on flat-panel design should
some distance from the viewer, even not be neglected. Beautiful hardwoods
though detail is easier as the piece becomes should be permitted to be themselves un-
larger.There is no point in carving detail less the carved object must serve some util-
and deep modelling into wood that is too itarian purpose. Finishes usually are better
soft or too inclined to split, then have to if a low gloss is obtained rather than a high

support it. If the wood is still green or its one, and carved surfaces should not be
sanded before finishing unless the risk to
carved lines is justified; it should then be
r done with care. Finally, and perhaps most
important, all of the factors of modelling,
texturing and finishing should be kept in
mind when the design is selected or
created.

Fig. 56.By piercing and silhouetting, this toreador

and bull from Ecuador looks deeper than it is.

50 SOME FINISHING SUGGESTIONS

RESTING CANE.L5

Turned pannier*
^
qjued in -*x

juirfac« is
Metal
reiner <«X-
tured.

5 implr, cheap, factory

vcriion at Ifft, hand-
Figs. 57, 58.Camels in olive wood detailed at riant,
from blanked on a
Israel are which i» a 2-nump
bandsaw and largely sanded to Bactrian.
shape, hand carving being limited
largely to head, hoof and saddle
details. Evon the chain links are
sawed from a double-drilled block, modity. Also, when you with milled
start
sanded and assembled by splitting
lumber instead of a log or branch, there is
and reglueing each alternate link.
less inspiration, less likelihood that the
wood suggest a design worthy of
itself will

Machine-roughed carvings it out. The process

taking the time to "feel"
Many people have taken to power equip- of waste removal becomes more mechanical
ment for roughing, and even for finishing, because the design is fixed. The product is

what were once hand carvings, often not "sudden sculpture," often crude in details
because of economic necessity but because and finish.
we have been imbued all our working lives In Oberammergau, West Germany, a tra-
with the importance of time. Many ama- ditional woodcarving town, carvers strug-
teurs who try woodcarving find it to be gle against continually rising costs by pro-
hard and painstaking work, so use machin- filing most duplicates of larger work, and
ery, as do many professionals, who find abandoning familiar pieces which do not
that hand work can be a low-priced com- lend themselves to machine roughing or

ROUGHING 51
are too easily duplicated in plastics or Fig. 65 (below).
Market woman of Bali
moulded compositions. isvery graceful and
In Israel, which gains a high percentage has a flower-pattern
of itsincome from the tourist business, cen- texturing around the
hips. Note irregular
tral "factories" rough out small figures like
base.
the camels shown here (Figs. 57, 58) then
hand-finish them. They are sold in shops in
the souk of Jerusalem, for example, some
even equipped with the stage dressing of a
lathe or other machines, a few hand tools
and shavings on the floor. The proprietor
—
may or more likely may not be a carver. —
But carvings are somewhat cheaper in the
factories themselves, where I got these.
The traditional wood in Israel is olive,
which is slow-growing, hard, an attractive
yellow and brown, and highly figured. It is
fairly common because some olive groves
are being replaced by housing, but it isby
no means plentiful or self-replacing, and
there is very little other wood in the area.
However, among the emigres who come to
Israel are artists and craftsmen from many 3i£
other countries, and these are trying to con- Fig. 59 (above). Girl in

tinue and develop their particular skills. costume is of

feast
ebony and wears a
There are rationalizations for machine flower headdress.
roughing beyond the time saving. The long Note natural foot
legs of many animals are an onerous carv- positions. Base is
important.
ing chore, so production time and the dan-
ger of breakage can both be vastly reduced
by sawing out silhouette blanks. The Israeli
camels are an excellent example, because
not only are the silhouettes band-sawed but
also the wood between the legs. Panniers,
saddle components and lead chains are
made separately and put on, the gross-
linked wooden lead chains being ridicu-
lously proportioned, but strongly tradi-
tional. Also, much of the forming is done
on a sander or with a rasp, and the eyes are
formed complete with a special cutter.
Study the differences in detailing and tex-
turing of the two resting camels to see how
much can be done by machine. The simple
version sells for a pittance; the elaborately
detailed handmade one costs six times as
much.

Fig. 61. (left) This panel has been varnished,

antiqued with teak stain and waxed.

52 SOME FINISHING SUGGESTIONS

Base or no base which? —
Whether or not a carving should have a
base is superficially a matter of taste or cir-
cumstance. The human figure, like most
mobile devices, tends to terminate in rather
unstable bottom surfaces; if it is to stand
firmly, it requires a base. Also, we have
been trained to expect a base for any three-
dimensional figure, just as we expect a
frame for any picture. Thus the abstract
sculptor finds a piece of beautiful and exotic
wood upon which to mount his most recent
glob,and the modern puts a pin in a block
tosupport his assemblage of scrap iron.
To the whittler a base can be a problem,
because it requires him to bore holes to
separate the legs and to chew away wood timately textures it. Of 50 small figures of
across grain in order to create a surface people on my plate rail, 42 have bases.
which he must then texture in one way or I have mixed emotions about bases, as

another. The base will give his standing the foregoing remarks may indicate. On
figure stability, but it often also detracts —
good carvings meaning that they take
because of its size or rigid shape. On the —
some time, effort and skill I tend to in-
other hand, a base provides the woodcarver clude a base, but it may or may not be of the
with a means of holding the piece during same wood as the original. Thus, for exam-
carving. It offers him a choice between ple, my squash player has a separate base or
screw and vise, and gives him the
carver's can grow out of one. (Fig. 62, above)
freedom to suggest rough or smooth
Sketch (below) and photo (above) of
Figs. 62, 63.
ground, rocks, sea, or however he ul- "Squash Player," 6 in (15 cm) high over the base.
Designed from frontal photo.

(Also see page 207.)

To mount, drill

SQUASH -
Rf\CQUET PLMER nah oq anv-wlutb a « SttLw
BASE OR NO BASE? 53
 From the owner's standpoint, the base original block. That is faulty. If there is a
makes life much simpler. It suggests the base, it should look can and does
like it

amount of space that must be allotted to the support the figure, but not be so obtrusive
carving, gives evidence of one-piece con- that the figure dare not move off it. A larger
struction in the cases where that is of im- base may give more solidity and save wood
portance, reduces the likelihood of injury and time if added later; but often a figure is
to a leg, contrasts with the supporting sur- more dramatic if an elbow or foot projects
face, even gives a convenient place for a over the base (however, increasing the risk
labeland/or the carver's signature. But a of damage when displayed).
massive base may check and split the carv-
ing, which of itself would adjust to humid- Let the wood show
ity changes. Finishing is so much a matter of personal
A base can,
and should, be considered as preference that I hesitate to make sugges-
either a help or a hindrance, depending tions. mention, project by project through
I

upon the carving. If contact between figure this book, how I finish my own pieces and,
and base is minimal, as in the squash when I know, how other carvers finish
player, an integral base is a constant nui- theirs. This, and general observation
sance during carving, but a base is essential through the years, have led me to some
for display, so it can be added later. general conclusions.
For some figures, a base of contrasting or The cabinetmaker strives to attain
typical
exotic wood can enhance the value of the a high gloss on his pieces by sanding in
carving. A rosewood base, for example, many steps and applying many coats of
suggests that what's above is worthwhile. finish. So do some sculptors. But many pro-
In a figure, the grain normally should be fessional woodcarvers try to achieve in-
vertical and adding a horizontal-grained stead a soft glow, unless the carving is in-
base may provide a pleasing contrast. But, corporated in a piece of furniture or there is
in general, the thick, squared-off base for a some special reason for high gloss like a —
light and lithe figure is anathema; the base carving of a supposedly wet seal.
should also be light and thin, or very tall, With the rise of plastic, the tendency has
not just a block. If it is integral and massive, been to avoid sanding to a high polish and
itshould be hollowed out somewhat under- to avoid using fillers; instead, some tool
neath to inhibit checking and rocking. marks are left and the texture of the wood
Balinese carvers often use a triangular preserved so the piece looks hand-
itself is

base which provides one corner for each made. This is particularly true of the harder
foot and a third for the base of a net, or a woods. For white pine and basswood, for
background stump, or a larger area to sup- example, the skilled carver applies thin
port the buttocks of a seated figure and a tints of color to give variety without de-
narrow one extended feet. An oval or a
for stroying the feeling of the wood. He does
circle or a free-form shape can be as effec- not apply a dark stain in the vain effort to
tive. The base can contribute rather than make wood look like what it is not.
the
confine. My own method for soft wood without
The sides of the base can help as well, if visible grain is with matte or satin
to spray
properly treated. They can suggest the ter- varnish to inhibit end-grain absorption of
rain or carry a simple design anything to— color. Then I apply tints lightly and wipe
avoid a flat and uninteresting block, unless them down immediately so the color re-
the carving is of itself so interesting that the mains in cut areas but is removed from
block will not be noticed. higher surfaces and planes, thus suggest-
Lastly, there is the matter of base size. ing the color but not denying the handwork
The conventional base is the size of the or the wood. To prevent color from soaking

54 SOME FINISHING SUGGESTIONS

Figs. 64, 65. The Scandinavian Kubbestol, or block stool, has been made for centuries. This one is more
elaborate than usual, with most surfaces carved. It is ash, about 14 x 33 in (36 x 84 cm), and weighs 24 lb
(11 kg). Seat is red Naugahyde® atop plywood. Back view (right) points up benefits of antiquing with dark
stain, painted on interstices and lines and then rubbed away. This provides surface contrast and emphasizes
the patterns, along with the shape of the log itself and darker streaks in the grain.

in and over-coloring cross-grain areas, I will weather quite well. The only problem is
flat-spray varnish first. Then I use oil pig- that they do tend to fill in the carved areas
ments thinned with flat varnish or drier, but and will eventually almost obliterate the
acrylics can be thinned and used the same carving as well as make the surface look
way. grey. My solution to that has been to use
I also use colors or stains to get an "an- teak for outdoor pieces whenever possi-
tique" or darkening effect in cut areas of any ble — it can be maintained with semiannual
carving as well as to darken backgrounds, coats of oil alone.
thus making the carving appear deeper It is dye or stain soft-
also possible to
than it is. Some of these stains include wax, wood pieces; I have done both with pleas-
and thus are really single-coat finishes, but ing results. I recently dyed the small birds
I usually use either a good furniture wax or of a mobile with cloth dyes in the absence of
neutral Kiwi® shoe polish to provide final anything else; the colors were vivid at least.
finish on interior pieces. For exterior ones, I also have a series of German sal-am-
there are both gloss and satin varnishes that moniac-based stains called "Beiz," de-

LET THE WOOD SHOW 55

 —

veloped particularly for wood. These in- Danish finish and tung-oil finish to be bet-
clude wax, so color and polish are applied ter than boiled linseed, though more ex-
in a single operation, as with some Amer- pensive; they're all that's needed on teak,
ican oil-and-wax stains. With the latter, and for example, even for constant exposure.
contrary to instructions on the can, it is Teak will retain its color and finish with
usually preferable to give the piece a coat or such oiling semiannually. (Kiwi® shoe po-
two of flat (satin) spray varnish before stain- lish is the "wax finish" used in such diver-
ing; this prevents the stain from over-soak- gent places as Bali and Sri Lanka.)
ing in end grain and causing overemphasis
there.
"Antiquing"
There are, of course, a host of special
Panel carvings can often be improved by
situations that require special finishing.
antiquing, the application of a slightly
Objects to be handled a great deal must be
darker stain and immediate rub-off, so the
protected more than those which are not
darker color is retained only in crevices.
handled at all; this usually means varnish.
This is what happens anyway as a panel
Objects like bowls or ladles to be used with
food should not be varnished. Some carvers
—
ages dirt collects in crevices and darkens
them, thus giving the panel color contrast
use lacquers; I use a salad oil that will not
and greater apparent depth. If you plan to
turn rancid. Such carvings as coats of arms
antique, give the panel a couple of coats of
or basswood doors finished to resemble
spray matte varnish first; it helps seal the
bronze require special finishing, such as
pores and prevents instant absorption of
gold leaf and antiquing.
the darker stain in cross-grain areas.
For hardwood carvings, I prefer not to
There are a great many ways to finish
use fillers or much of the other parapher-
carvings, of course. Outdoor signs, and
nalia and procedure of cabinetmaking
panels, usually in pine, basswood or possi-
unless the carving is on a piece of furniture
bly oak, should be painted in most cases,
and must have a similar high gloss. There
but may be "antiqued" on an instant basis
are two schools of thought on this, and all
by beating with chains, scorching slightly
the variations between. Some sculptors like
with a blowtorch or sandblasting to take off
a high gloss on their work, so they sand and
sharp edges. (Some carvers start with old
polish and fill and varnish or shellac, and
boards to get authenticity; in that case the
rub downwith steel wool just as furniture
poorer the finish the more authentic. Poor
makers do. (There is now a plastic foam
finish goes with splintered ends and rotten
impregnated with grit, to replace steel
wool.) The opposite school, of which I am a
—
spots and poor carving. I've known of
carvers who buried their products for a
member, prefers texture, so uses sand-
paper sparingly if at all, preferring to let
week or two to give them antiquity —or
dealers who did it after them. an outdoor
) If
tool marks show. Also, the wood is left
panel is not painted, it should probably be
without fillers or coloring, unless it be an-
tiquing for depth, and finished with flat
marine-varnished which — means high
gloss; matte and satin finishes simply will
varnish and wax, oil and wax, or wax alone,
not hold up in the weather.
depending upon wood and subject. We
don't want a high polish, but a soft glow.
There are now also several kinds of one- Gold-leafing
coat finishes, but they tend to create too Outdoor signs, nameplates and liturgical
high a gloss for me. carvings are quite common in relief carv-
You can obtain good results in a natural ing, and may require gilding or gold-leafing
finish on hardwoods simply by oiling and of anything from lettering to the entire sur-
waxing. I have found processed oils such as face. Gilding is actually just another kind of

56 SOME FINISHING SUGGESTIONS

Fig. 66. A mahogany table leaf is the base for this quotation from Goethe. The leaf is 12 x 36
150-year-old
in (30 x 91 cm) and was handmade, so the end lobes are not exactly alike. Also the edges slope into
roundness, and the whole had a fine patina. The lettering is Old English from the tomb of Richard II.
Finish is matte varnish and natural shoe polish.

comes in loose sheets separated by thin

lacquering, and the technique is detailed on paper. Imitation gold must be protected or
the container. Bronzing, coppering and sil- it will tarnish, particularly out of doors.
vering are similar. All can be applied in Real gold comes in packets of 25 leaves,
many with spray cans with a spray-
tints — each 3Vi in square (21 sq cm) totalling 284
can result. I have done better with rub-on sq in (1,832 sq cm). It is actually quite hard
compounds, particularly for various shades to find. It can range from \3Vi to 23 karats in
of gold. These are apparently gilt in a wax, purity; real gold is 24 K but has a tendency
so careful application with the fingertips to split when worked. Woodcarvers use 22
and rubbing in improves the finish. Paints, to 23 K gold leaf. Real gold leaf comes either
brush or spray, tend to pile up in crevices in loose or transfer sheets, the latter held to
and show brush marks. They are not dura- the backing tissues by jeweller's rouge. The
ble when exposed to the weather and some- transfer gold is easier to use because it is

how look synthetic. If used, they must be applied just like a decal, the tissue peeled
covered with some sort of finish, such as a off after it is applied. It avoids a great deal of
polyurethane varnish. fussing with brushes and specialized trans-
The ultimate in such work is to apply fer devices, but is somewhat less econom-
gold leaf, which is ridiculously expensive ical because parts of sheets may be lost or
today. Real gold leaf is about one three- incorrectly applied.
hundredth as thick as a human hair! There If you plan to use real gold leaf, the carv-
is, of course, imitation gold leaf just as there ing should be suited to it. This means se-
is silver leaf, also an imitation. Imitation lecting a wood that is not too coarse in
gold is readily available in paint and hobby grain —basswood is ideal —and without un-
stores, comes in packets containing 5.2 dercuts or extremely complex or difficult-
sq ft m) as 25 leaves, each 5V2 in
(.468 sq to-reach areas. The gold may bridge over
(14 cm) square. The imitation gold is thicker such areas or not adhere properly. (See Ap-
than the real thing, harder to pick up, han- pendix II for further details on gold-leaf-
dle and cover an area with, and usually ing)

"ANTIQUING" AND GOLD-LEAFING 57

 Rirtll

Small Pieces

Whittling gnomes the-air one under 4 in (10.2 cm) tall. The

just
These three Oriental gnomes are blanks are sawed out of 1-in (2.5-cm) wood,
adapted from a little figure I saw in Tokyo as and will also serve here to amplify the in-
a decoration in a jeweller's showcase. They structions on handling the knife.
are caricatures, of course, and quite simple All the little men have stylized bulbous
in shape as well as adaptable to a number of noses, slanted eyes and no mouths or ears.
poses. All can be pine or basswood, and The procedure is shown in Figs. 67-73.
painted. The seated and bent-over figures
are each 3 lA in (8.3 cm) long, the nose-in-

GROUND WATCHER SKY WATCHER

MUSICIAN ORIENTAL GNOMES
White p>n«- painted
Fig. 67.

58 SMALL PIECES
 Fig. 68. Fig. 69.

Figs. 67-73. Grains for the Oriental Gnomes run grain first. Draw the knife along the bottom of the
with the beards. (68) After the blanks are sawed and arm from
of the seated figure, so slices can be cut
roughed to shape, point the hat and beard by the coatup to them. (70) Some cuts are best made
paring cuts where possible, and thumb-push cuts by pushing the knife edge, rather than paring;
otherwise. (69) Make outline or stop cuts across however, they are difficult to control. So the left

Fig. 70. Fig. 71.

hand is used to provide thumb force behind the of cutting the arm free is shown on the seated
blade. (71) For the paring cut, wear a thumb stall to figure. If outlining is done thoroughly and cleanly,
protect the ball of the thumb. (72) The stooping the modelling of arm, umbrella and nose is rapid.
figure is completed, and details on the other figure Eyes are formed by cutting slits with the knife;
have been sketched but not cut. (73) The procedure pupils will be painted black spots.

Fig. 72. Fig. 73.

WHITTLING GNOMES 59
Neckerchief slides and the like
Probably the most popular whittling
project among Boy Scouts has been the
neckerchief slide. The designs can also be
used for pendants, pins and bolos, and
many can be carved extensively or simply
be painted silhouettes, depending upon
the maker. The primary shape is provided
by the silhouette itself, and modelling is
minimal, so the designs are very practical
for beginning whittlers.
I have sketched about 40 of H. M. Sutter's

designs, and pictured They are

others.
from 54- to %-
basically silhouettes jigsawed
in (6.4- to 9.5-mm) pine or basswood, al-
though they can be made of harder woods,
and thicker if more modelling is desired, as
on the Indian chief head or the thunder-
bird.Most of the designs are variants of a
few basic shapes. Most versatile is the Fig. 74.Neckerchief slide. Slides can be derived
shield, which from a defensive weapon be- from shield blanks, but can, of course, be cut out
came the principal basis for heraldry. Fam- directly to shape.

ily escutcheons or coats of arms can be

carved on a shield background, but it can
NAPKIN RINGS
also be used as a blank for arrowheads,
masks, and can be turned sidewise or up-
side down provide a blank for animals,
to
birds and fish. It can be rounded as a plain
boss also.
The arrow is a popular slide design; it can
be interpreted in a variety of ways, depend-
ing upon the skill of the individual. The
hiker sole or shoe sole is similar in that the
shape itself is can be whittled as a
simple. It

sole with a date and/or location. However, it

Fig. 75. Seven napkin ring designs.

Girdfft elephant
Kenya Lion

Original 7iqur«j

crude <S block/

60 SMALL PIECES
 ^

qroova £ —
CANOE >W*'
Round
d

lop K botto m,trtm «nis

ARROW WV
H^ar^fcaWnqmaYbe
Chp-
carwo'

CROSS fclfctf
CANOE PADDLE &
ARROWHEAD THREE VARIANTS
Scallop surface to
Suc^«»T stone f lakmo

Chip- i
- r<arv«d

43-

HIKER50LE-WW
THUNDERBIRD
A favorite Indian de-
Siqn &wid«(y varied

SHIELDS VARIANTS-*' V**' I

OWL- VW'
DOUBLE CARRICK BEND*
5QUARE KNOVUW %*iW)f COVERED WAGON
Fig. 76. Some typical bolo patterns.

can also be carved into several quite com- The owl and covered wagon are just for
plex shapes, like the lobster, fish and duck. fun; both aresomewhat more complex. The
The same is true of the canoe paddle, which thunderbird is one of the most used and
with a little interpretation becomes a snow- most significant of Western Indian designs,
shoe, fiddle or tennis racket. often changed in detail to suit the whim of

SLIDES AND INSIGNIA 61

 the maker. It is used on rugs, pins, baskets,
beaded items, costumes and jewelry.
The square knot is the most useful knot,
and so is very familiar in Scouting and else-
where. This is a more complex carving be-
cause it involves a good deal of precise
modelling. Even more complicated is the
double carrick bend, a more complex knot
used for joining two hawsers. Similar in
difficulty are the intertwined six-point star
and the crossed links.
The problem on all of these designs is to
use soft wood and carve it without splitting
off sections with the grain. It is very easy,
for example, to accidentally split off the
Fig. 77. feathering or points of the arrow or the
ends of the canoe, the head of the thunder-
bird, or the arms of the cross, and easier still
to break out sections that are chip-carved.
If made into neckerchief slides as Mr.

Sutter did it, a second piece of wood with a

34-in (19.1-mm) hole drilled in it is simply
glued edgewise on the back. It is also possi-
ble, of course, to whittle the slide in a
thicker block, so the hole is integral. The
same designs can be used for bolos, al-
though in this case it is necessary to have
the "finding" to fasten on the back, or to
make To make a pin, a "finding" with a
it.

flat-backed pin can be glued on, or one

made by gluing a safety pin into a slot. In
Fig. 78.
any case, the piece should be brightly
painted unless it is in a fine wood.

Belt buckles, plain and fancy

Belt buckles are an easy, utilitarian way
to display both beautiful wood and good
carving. Structureand design can suit your
fancy, ranging from simple line patterns to

;R|^ * A elaborate modelling, appliques or inlays of

metal or stone on both exhibited front and
important back ends. You can also inset
small shaped pieces, such as gears or ani-
mals, in a plastic set into a well of wood . My
childhood crony John Phillip, late of Whit-
tier, California, and Harrison Neustadt, of

Sunrise, Florida, have each made dozens of

buckles for gift or sale. Mr. Neustadt has
Fig. 79. even designed jigs for bending and insert-

62 SMALL PIECES
ing the findings into the wood without
splitting. He usually makes the buckle of
wood alone, while Mr. Phillip backs the
wood with a metal frame to which the find-
ings are soldered.
The basic ingredient is an interesting
piece of wood cut to a blank of the desired
shape —round, oval, square, rectangular,
petiolate or free form. should be lA to 3/s in
It

(6.4 to 9.5 mm) thick and a bit wider than

the standard belt widths of 1, \Yi or 2 in
(2.54, 4 or 5.1 cm). If buckle length is more
than about 2 in (5.1 cm), the shape should
be slightly curved to fit the abdomen. If
the blank is circular, it can be turned and
ridged or otherwise machine-shaped be-
fore carving.
John Phillip's favorite fastening is based Fig. 80.

on a clip, or combined hook, that can be

stainless steel, brass or even a coat hanger
or similar stiff iron wire. The bent form
should be strong enough to resist midriff
expansion after a heavy meal, so that any-
thing attached need only support itself. The
loop end (see Appendix I, pages 313-315) is
made to fit the desired belt width, and the
hook engages in the belt holes. The belt,
incidentally, is usually the kind that comes
with snaps for easy buckle interchange. Fig. 81.
You can also cut an undistinguished buckle
off a standard belt and rivet one of these in
its place because the new assembly adds a

couple of inches.
Least complicated is stapling the clip to
the back of the blank. You can make suitable
staples by bending brads into U's after
sharpening both ends. The brads should
not be long enough to go through the blank
and in brittle or very hard wood, or in cross-
grain pieces, they should be driven into
predrilled holes. A more secure design in-
volves routing or grooving a slot of the de-
sired shape into the wood, then glueing the
clip in securely. However, Mr. Phillip usu-
ally solders the clip onto a plate of thin
stainless, brass or copper of the blank
shape and contour, roughens the face of the
backing and glues on the wood. The back-
ing plate should not be more than Vu> in (1.6 Fig. 82.

BELT BUCKLES 63
 Fig. 83. The owl is tinted and has inlaid eyes.

and boiled linseed oil, applied with an old

sock. He says that his earliest pieces have
improved with age and now have a lovely
patina.
If you want to inlay metal or stone inserts
in the face of the buckle, set them securely
so they do not catch clothing. Mr. Phillip
does it by placing the insert where he wants
it, clamping it, then scratching around it

with a sharp scriber. He reinforces the

scribed line with a series of sharp center-
punch holes, then routs the socket in his
drill press with a small bit running at high

speed. In this way he can shape areas that a

knife would chip and break out. He drills
only as deep as the insert, of course. The
cavity is filled with Goodyear Pliobond®
cement, enough so that the adhesive will
mm) thick or the buckle will be overweight. seep out around the edges when the insert
You can use a very thin plate and leave it is seated. Next, he sprinkles fine-sanding

sufficiently oversize to crimp it around the dust from the wood (be sure it is the same
wood as a jeweller sets a gem into a bezel, wood) all around the edge and mixes it with
but this is normally unnecessary because the adhesive. Then he taps the insert all
there is little on the facing.
stress over with a small mallet or hammer, if it is —
Mr. Neustadt uses no backing. His find- —
metal to fill any gaps or small breakouts.
ings are just the C-shaped clip and a pin, He folds a small piece of waxed paper over
both forced by a jig into predrilled holes. the glued assembly to prevent sticking, on
The findings have grooves near the ends, so top of which is laid a block of hard wood,
glue will hold them in place. sawed to the same radius as the buckle top,
Finish can suit your taste. I usually use a with a gap to clear any projecting surface.
spray coat or two of matte varnish, followed He then sets three small clamps at ends and
by waxing. Mr. Neustadt has been using his center and allows at least 48 hours drying
own mixture for 20 years on all of his craft- time. When the assembly is dry, he re-
work, including furniture, bowls and plat- moves block and paper, sands and fine-files
ters. It is a 50-50 mixture of polyurethane the surface, then paraffin-buffs.

(More on small pieces will be found in Appendix I starting on page 313)

64 SMALL PIECES
 8

Carving Animals

on a theme
Variations craftsman. It is the innovator who wins
Throughout history and in every field or prizes at art shows and exhibits, the crafts-
profession, there have been two schools of man who wins ribbons at fairs.

thought, one stressing innovation, the Famous artists have said repeatedly that
other improvement. One worships there is no shortcut to art; it takes an enor-

creativity, newness, difference in short,— mous amount of practice, of trial and error.
strives to produce or do something that has Only when the basics are mastered can the
not been produced or done before. The artist strike out on his own successfully.

other worships perfection, accuracy, intri- There are many ways in which to be origi-
cacy — in short, strives to make a familiar nal, in which to vary even a familiar design;
thing better. One
concerned with ideas
is not innovation must be total in concept.
all

and dreams, while the other is concerned There may be newness in pose, in detail, in
with reality. overall silhouette, in arrangement or con-
There have been, and always will be, trast, in texture, even in finish, for innova-

both kinds of craftsmen, both kinds of art- tion is largely the meeting of a challenge
ists. Few of us are at the poles of this dif- adjusted to the abilities of the individual. It

ference, but most of us lean strongly one

way or the other. We have the whittler who
strives to carve a longer or more complex
chain, or the carver who tries to make a
more lifelike or anatomically correct bird, or
the sculptor who strives for a perfect copy
ofan ancient Greek figure. On the other
hand, we have the whittler who creates
new and sometimes amorphous forms of
animals, the carver who refuses to dupli-
cate his own or another's work even if he
feels thatcan be improved, and the sculp-
it

tor who creates forms that are sometimes

not even understandable from their titles.
He is marching to Thoreau's different
drummer, and the idea of sameness appalls
him. Paradoxically, this difference may be
the vital factor in making the individual Fig. 84. Lounging jaguar 8 in (20.3 cm) long, orange
with brown markings, is a compound of a shaped
famous as compared with commercially branch of copal with tail and legs tacked on. Head
successful, a sculptor as compared with a is carved from the branch, but ears are tacked on.

CARVING ANIMALS 65
 BULL h«xico Granadillo +4" lone
Fig. 86.

POLAR BEAR u.s.a. v*—« 5"jen

9

Fig. 87.

CRANES & SNAKE, meu.

Fig. 85.

is a branching out, an effort to achieve

something that is a definite step ahead for
the carver concerned, an attempt to convert a
mental picture into a physical one.
Most of us cannot hope to visualize the
bird-and-flower compositions of the Bal-
inese; our traditions and instincts do not
seem to lead us in that direction. The cranes
and snake pictured here (Fig. 85) are a sim-
Fig. 88.
ple example, in which the fragile bird legs

—
are reinforced quite frankly with fo-— For contrast, study the Zapotec Indian
liage, and the heads with crest and snake, (Mexico) effort to reproduce the national
without robbing a particle from the overall symbol: an eagle on a cactus with a snake in
effect. The entire composition is fitted to its mouth. (Fig. 88) The carver was not very

the available wood but without being inhib- skilled, but he achieved something which
ited by it; there is no blocky and angular became part of a national exhibit. One
look. The composition flows upwards from worked almost entirely (except for the
the base in lines that are not at all reminis- snake) from a single block, while the other
cent of the original block. was content to carve the bird, then mount it

66 CARVING ANIMALS
 —

on sawn assembly reminiscent of cactus.

a
Yet both are strong and original.
The bull (Fig. 86) is in granadillo, made
by a Zapotec from wood given him by a
visitorfrom northern Mexico, and the polar
bear (Fig. 87) is in sycamore chosen for the
color and figure by an American carver.
Each depicts its subject fairly accurately, but
distinguishing characteristics of the animal
and the innate coloring of the wood are
emphasized. Contrast these in turn with
the African animals on napkin rings (Fig.
75) which are basically true to life, but
adapted for a different purpose. These ani-
mals are miniatures, relatively speaking,
and the silhouette is the important element Fig. 89. Dog is carved from a bent branch, with

in recognition. However, the carver legs, tail and ear added. It is from Oaxaca, Mexico.
avoided the ungainly effect of the over-tall
giraffe by eliminating the troublesome legs. fronts against a common background, or
There can be much originality in a amorphous human or animal figures that
frankly comic figure that brings a smile to can be arranged in various ways on a base,
the observer, as in the American goat and are examples. One possibility of this sort is
the Japanese owl (Figs. 90, 91) with attached to provide flat elements with magnetic-tape
and rolling eyes. These, like the napkin
rings, are made for sale, hence are simple in Fig. 90.
design, but they are different from run-of-
the-mill objects. Another example of the
Owl h»J 1C(>4-
same thing is the Noah's ark from Israel
r»te («T set
(Fig. 92), which, like the owl, is assembled
from unit carvings. This design has the ad-
vantage that the stylized ship can be as-
sumed to have no deck, so that the body of
each animal is either within the cabin or
below the bulwarks. The carvings are only
COMIC GOAT uu c
Joe Roth rock, ifkr Bob HorbiMi
the heads and necks of the animals, and
they can be arranged as you wish about the
composition, but the effect is unique and
different. The same idea could be carried
out in a fully 3-dimensional ark, with ani-
mals on both sides. The reed roof could
yield to a single-piece one of textured or
grooved wood, and so on, so that every ark
could be an individual composition.
This suggests another idea that is rela-
tively uncommon, that of using the same
elements in a variety of arrangements, or
betterstill —
allowing the ultimate owner to
vary the composition at will, as children COMIC OUL Japan C.dar
build with blocks. A series of building Fig. 91. Plastic inserted tits hive rellinq pupils

CARVING ANIMALS 67
 U

NOAH'S ARK A. Kle.n, Jerusalem * rat I

This unit dark'* 1_

Fig. 92

or other "tacky" backs, and set them against

a cloth-covered, sheet-iron plate or a felted Wh.t« be
board (not illustrated). & eye rim

There are many ways in which some indi-

viduality may be expressed. The large-
sized birds are two of my own examples.
(Figs. 94, 95) When I originally carved a
"bug tree" I decided to crown it with a large
cardinal. So I carved a fat, stubby bird from
a wild-cherry log and put him atop an as- laqsamfy*

—
semblage of more than 150 bugs although ar\qlddown
4spla^«d^ -"

Black winq
ft fell-

SCARLET TANAGER
Fig. 94. A heroic (2f fall) cancaiur-e

Fig. 93 (left). Fantastic dragon assembled from

whittled pieces in Yucatan is about 18 in (45.7 cm)
long and ingeniously put together from pieces of
approximate shape.

68 CARVING ANIMALS
the cardinal is a seed eater, not a bug eater.
Some of my neighborhood "birders" were
upset. After ten years, when the cardinal
dry rot and the ministra- 6Uck mask
had succumbed to
tions of friendly woodpeckers, I replaced
him with a scarlet tanager, although I
haven't seen one in my neighborhood in
the more than 40 years I've lived here. My
point is that you can cut loose and do as you
like. You, after all, are the carver, the artist,
and you have some license. Also, the bird Foot(bdJ<) ,

is about 6*fc
need not be anatomically accurate unless it
is being produced as a portrait. The car-

dinal was happily fat, the tanager has

Both in chtrry
dowel-rod legs and no depiction of feath-
ers. To anyone who criticizes, I can say that
the tanager at least eats bugs, but I don't CARDINAL
like him as well as his predecessor.
Another heroic (22" fall) caricature
Another example of the same sort of Fig. 95.

thing is the angelfish (Fig. 97) I chose for a

pendant and earring motif in the rare and Take the loaves and fishes (Fig. 96). Both
beautiful pink ivory wood. Because the loaf shapes and fish shapes are generally
wood has so much color and figure, I known and accepted. But the man who laid
elected to make the pieces across grain, the mosaic in Tabgha, Israel, long ago dis-
despite the long trailing ends of the dorsal torted the fish and showed only the ends of
and ventral fins. As it turned out, the wood three loaves in a basket, to depict the whole
simply cannot support such long thin sec-
tions, and even a minor bump of the pen-
dant against something hard, or something
pressed against it, breaks off the fin ends.
Thus I have drawn an alternate design,
which ties the trailing edges into the tail. It
is not as accurate anatomically, but it is

much more durable. This wood, by the

way, is extremely rare still.
Another example of a fish design will
reinforce my point about the permissibility
LOAVES & FISHES
of varying a design as it occurs in nature. Fig. 96.
Modified from -the mosaic it Tabqha

Eye is a double curl of qilt

wire, -formed in place

'Tail curves to one fact,

fins to other

Fig. 97. ANGELFISH PENDANT & EARRING z^n^*^^, simpler

CARVING ANIMALS 69
 STYLIZED DEER » one

Fig. 98. (above). Various ways of treating a stylized Biblical miracle of the loaves and fishes. The
deer. Fig. 99 (below). Granadillo stylized bird and fish are not very realistic, although still rec-
deer, each about 10 in (25.4 cm) high from Guerrero,
Mexico.
ognizable. Ihave adapted the group for a
barrette or pendant and modified it still
further. This can be done, and, again, it is
artistic license.
As a final example of variations, consider
the doe and fawn (ayelet in Hebrew). I felt

when I saw it in Israel that the legs were too

heavy, and had probably been
that they
made that way because the material was
stone. With the heavy legs, it is possible to
saw such a figure completely from wood by
sawing through the nose, then gluing
at

and filling the kerf later. However, the

hooves were more nearly equine, as you
can see from my copy of the original. So I
modified the design to make the hooves
more delicate, then went on to make eight
further adaptations. All have a common an-
cestor, but they become less recognizable as
they change. Three possibilities are shown
here (Fig. 98) as my variations; you can
certainly produce your own with a little

70 CARVING ANIMALS
thought. You will not have the same inhibi- with little fear of the nit-picking criticism
tions or freedoms as I do, so your designs that any carver of the human form is likely
will inevitably be different. That is not nec- to get. We usually cannot distinguish indi-
essarily bad. The point is that you can and viduals within an animal species, and in
should vary designs to suit your purposes fact we do not know
anatomical details.
or inclinations, and have no compunction This is borne out by general animal and bird
about doing so. Sometimes, you'll improve —
books in which sketches often widely dis-
the original idea in the process. agree.
I have carved many kinds and many
"Different" subjects, poses, poses of animals in recent years, some
small, some large, but most of them not the
textures and finishes
familiar domestic animals nor the familiar
Animals, birds and fish offer a tremendous
variety of designs. There are so many spe-
poses. These form a mixed grouping,

cies, so many shapes, sizes, surface tex-

which includes work done at various times,
tures, poses. The possibilities for new for various reasons, and in a variety of

poses, techniques, surface textures, and woods. Most effective in terms of observer
finishes are far greater than they are in carv-
comments has been the pair of long-tailed
weasels. (Fig. 101).
ing figures of people. (We are one very
limited species of animal ourselves, al-
The stylized Pekingese (Fig. 102) and the
toucan caricature (Fig. 103) were both made
though we tend to forget it.) What's more,
the typical observer has far less intimate
from the butts of timbers discarded as scrap
knowledge of animal anatomy than he does by a nearby piano company. The weasels
of human anatomy, so he is less inclined to
were a serious effort at animal portraiture,
be critical of minor errors, or even of the and the musculature and poses were care-
fully checked with available references. The
exaggerations of caricature. All in all, this is
Pekingese, on the other hand, exploits the
a rich field for the carver.
texture of the surface and the great plume of
There are specialized books on carving
tail as well as the pug nose that charac-
decoys, eagles and birds, but they are de-
voted to copying the living bird (or animal) terizes the breed. Because the grain is ver-

precisely; in fact there are major awards for

tical —that is, across the animal's body in-
producing a decoy that looks as much like a stead of along it —fluting with a gouge
flat

stuffed bird as possible. There is, however,

was relatively easy and did not generate the
an entire field beyond this, that of carving
birds and animals which are unmistakable,
but are not slavish copies of living ones.
Take as a case in point the photo of four
totally different treatments of the turtle
(Fig. 100). In this section are other exam-
ples, together with a variety of other ideas
in animal and bird carving. My hope is that
they will stimulate your imagination to try
still others. You can go as far as you like,

into great detail, or total stylization, free-

form, caricature, and unusual finishes,

Fig. 100. Four variations of the lowly turtle, ranging

from caricature to serious sculpture: the upper right
figure is from the Galapagos Islands, the other
three are from Mexico.

CARVING ANIMALS 71
 Fig. 101. Two long-tailed weasels in mahogany. The
weasel on all fours twists around the standing one.
The polished finish suggests the slick coat of the
animal. 4 x 10 x 10 in (9 x 25 x 25 cm).

splinters that normally occur when ma-

hogany is tail has more
textured. Also, the
strength than would have with the grain
it

lengthwise. The result is a piece that makes

an excellent and durable doorstop, if
nothing more.
The toucan is a composite or assemblage
which resulted from buying a toucan upper
mandible from a Cuna Indian in the San
Bias Islands off Panama. The body was
carved in scale with the mandible, which

Of^ZC\

PEKINGESE
Mahogany 4»7^*H'
Grjm vertical Finish
is o,ouq» fluting

Fig. 102.

T0R0 TOUCAN Fig. 103.

Walrvut.tmW Z\<*W

Bltck
Yellowish

61

72 CARVING ANIMALS
 4

was glued over a stub. Also, the walnut

body was tinted with oils to suggest the
garish colors of the bird and to carry out the
tones in the actual mandible. This is a car-
icature, of course, as is the perplexed pen-
guin (Fig. 104).
The bear (Fig. 105) is a reversible piece,
combining a stylized animal on one side
with a caricatured troll on the other, so the
exposed face can match the observer's
mood. The bear design is taken from a
smaller Swiss original I saw in Brienz many
years ago, and I designed the troll to fit the
same silhouette. (This can be done with
various silhouette carvings. It converts PERPLEXED PENGUIN J«iuton<3, tinted
them really into double-sided free-stand- Fig. 104.
ing panels, thus avoiding the often dull rear
view of a conventional in-the-round carv-

BEAR & TROLL

Silhouette of bear isuiedfor
troll on reverse of a 4*4^* 1

butternut block. (5ome

Scandinavians surest that
the \ro\\ legend is based
on a bear seen dimly.)

Fig. 105.

CARVING ANIMALS 73
 ing.) This piece is in butternut, a wood easy
Ear holes drilled to carve, capable of taking the limited de-
Eyas inlaid bone, tail, and with a pleasing natural color.
Wood centers
$eak bone Somewhat similar in nature but consider-
ably smaller are the pieces whittled by oth-
ers (Figs. 106-109). They include four car-
icatured birds in granadillo wood, made in
Mexico, with copper wire legs and bone
eyes and beak inset. The eyes are unusual
•Wire flattened
in that they are drilled rings with black
wood centers, inlaid in the wood of the
Fig. 106. OWL (6ranadifo wood) head. Granadillo wood (also called gra-
nadito) is a mixture of dark brown and light
Ev«s X beak
y«s E bca inlaid as in owl tan, so pleasing effects can be obtained by
A,
proper selection of the piece of wood and
carving the bird so that contrasts are ob-
tained on wings and/or tail.
The puffin poses (Fig. 110) I originally
made in ivory, but they can be made in
wood just as readily and lend themselves to
tinting. These are fairly accurate depic-
tions, but the bird looks much like a car-

l
n/
cs dre black crescents
BOAT-TAILED GRACKLE
Fig. 107.

Details as on owl
FROG
Pass or pine with

green- qray finish

C&d holder by
Fred C lark

Fig. 111.
Lea leno/fh
,to suit
s \
SWAN FLAMINGO KINGFISHER
Fig. 108. Fig. 109.

Vellow

PUFFIN Fig. 110.

74 CARVING ANIMALS
 Fig. 112.

Background pierced
between figures-

WOODCHUCK GROUP (for 5</houettes)

icature anyway The woodchucks (Fig. 112)

were a silhouette group for the top of a
breadboard, but can be done as a three-
dimensional group, as a flat plaque or a
silhouette carving, as you wish. The frog
(Fig. Ill) is a place-card holder if so desired,
because his sawn mouth can hold a card or
a message. (Fred Clark carved it.) STYLIZED
All of these figures can be laid out on BALD EAGLE
suitable blocks or boards and sawed out on
Female at nest
the band saw, with details cut by coping
Fig. 113.
saw. This saves enormous time in carving.
The larger pieces are best done with chisels,
the smaller ones with the knife. I have used
a variety of finishes on my carvings in this
group, each suited, in my opinion, to the
particular subject. The weasels are var-
nished and waxed to a sheen, suggesting
the smooth coat and sinuousness of the
animal. The toucan is toned to contrast
with the basic dark brown of the walnut.
The Pekingese is textured with a gouge on
all areas except the face and paw fronts. The

bear is spray-varnished and antiqued with

a darker stain in crevices. The frog is tinted
green on top and lighter greenish-grey be-
neath, with oils or acrylics. The puffins are
finished with oils, and the other birds left
natural.
One of the most enduring of carved bird
forms is the eagle, because of its association
with the United States and because the bird
itself is so impressive. I include three exam-
ples of eagle carvings in this group (Figs.
Fig. 114.
113-115),because they are somewhat dif-
ferent from the norm and might not other-
DETAILED EA6LE
wise be available.
I was also intrigued by a truly giant Stoopina mata

CARVING ANIMALS 75
VV
B«ck
WW V
Eyes iluc
forward

Crojj-hatth
was designed exceptionally
also for the rearing stallion
distorted but very dramatic pose (Fig.
well. This
from
goes
Bali, a
117).

In sharp contrast is my ramshorn snail (Fig.

119), which was an experiment in making
carvings that can be placed on the floor. The
weasels and the Pekingese are also "floor
pieces."
At one time, not so recently it was the
fashion for both sexes to wear neck chains
with pendants; the more bizarre the pen-
dant the better. Pendants are also used for
chain pulls on light fixtures, curtain pulls,
or just for decoration. A duck, frog and
rabbit inwood are pictured (Fig. 118). Such
designs can be carved from scraps of exotic
woods and are interesting alternatives to
standard or heroic figures. Blanks can be
carried about conveniently and carved with
the knife in almost any surroundings.

Fathering detailed, prominent

AMERICAN (BALD) EAGLE

rooster 35 in (88 cm) high included in the
Yugoslav naive art shown in the United
States in 1977 (Fig. 116). In this case, the
carver overemphasized the feathering for
effect, and even provided stumpy legs and Leqs 8 f«t.t oversiie
feet,seemingly a characteristic of Yugoslav not textured
peasant carvings of humans. The result is
quite a dramatic bird.
Other examples of stylized, and perhaps
caricatured, animals include three which,
as far as I am aware, are not native to the
countries where the carving was made. The
BIG ROOSTER
Mate Genera lie' (Yugoslavia) 1975 35"
lion from the Philippines (Fig. 120) is proba-
bly a result of tourist interest in lions, but it Fig. 116.

76 CARVING ANIMALS
 Fig. 120. Stylized lion has exaggerated musculature
and mane. It is about 18 in (46 cm) long.

Mexico Ordinal onyx

REARING STALLION Ui
Original 21 hiqh, in a white hardwood

Fig. 117.

CHESS KNIGHT

"£=^ Fig. 120.

PENDANTS 5«ft stone or wood

Fig. 118.

Fig. 119 RAMSHORN SNAIL

Europe - KlaKo^jnv ,

4*1*11" in 4*10*12' block '

Core of spiral

i » depressed

CARVING ANIMALS 77
 Ears are (juairtVrs of
A hole, with
t^ % fumed balls ,<^lu«^ on
hollow to
seat head

Accordion is Notc^rd in
inserted wtdqe
turned nojt

Eye* are -g deep

<5ouq? narfchas,-
burr 15 lid

Arm unit 2 V notched douqh

out

Assembly on a V<\ dowel

C0HP05\Tt BEAK i s »«i

t&rs qlued on

F«.Wat40°
stained, +hen
shallow-qreo>«d
for toes
Jf

Hcadisal^ball-
with snout- held in
socket by a
rubber band
Leg unit 314" notched douqhnut

5tamed «ll over, with

& tai tip liqhter,
underbody I

COMPOSITE FOX Israel £yes carved m .stained

head. Leeji qlued on &
Fig. 121.
tail set in drilled Ko\r

COMPOSITE HEDGEHOG Israel

Random qouqe cuts in stained surface

Head is a 1% ball-wiTh nose-
set in body socket Lyes inset
expanded by
wetting jewels

Cut»w«Y
j hows astembl

Fig. 122. Composite of animals.

78 CARVING ANIMALS
 F«&th«r pattern 'u rnidf
with y^ semi- circle stamp
or qoo<(«.. 0jckC|round
(Sunk.yg") is stippled witti
punch or v«in«r. Details
4rt vo'ncr or V-too| lines,

IBEX H A N SA ( 5acred Goose) Sri Unka Gaflsnwn

By a Russian «mi<jre in lsra« I
Surrounded by p«1als of- the lotu* (P*la-Pttt\a). A traditional dwi'o.n,
Fig. 123. carved ma pre-Wn«d pi«cc of %" hard, whit* wood.

One finds pieces in Israel like the bear, a time. (This is not the way the original was
hedgehog and fox made by a German im- made. It bears all the signs of being hand-
migrant and the ibex (Figs. 120-123) in cow textured.)
bone, made by a Russian emigre. (The lat-
ter has produced a number of other pieces
in the same material, some quite complex, woo
but his market is limited because tourists Goose & swan
tend to buy souvenirs rather than art. Bone are other variants

is not nearly as susceptible to machine pro-

duction as is wood.)
The German emigre has designed his
pieces so that most of the heavy work is
done on a lathe. The hansa carving (Fig.
124) from Sri Lanka (formerly Ceylon), can
also be turned in a lathe, including the shal-
low V of the outer border and moulding
circles, always difficult to hand carve. Then
the background can be bosted (sunken)
with a small router, leaving the carving of
the two-headed bird and the leaves as the
hand work. It it also possible to do some
BIS & DUCK
Neck variations m<i l«q knqths
portions of the feather-texturing with a
stamp that makes several of the small arcs at Fig. 125.

CARVING ANIMALS 79
 This is true of the very blocky cat card-
holder which is square in cross-
(Fig. 126)
section and obviously sawed to shape, then
sanded. Carving is minimal, because not
even the features are outlined, but the sil-
houette, plus the slight narrowing at the
nose, creates an unmistakable cat, even
though its tail is the full width of the body
and no modelling is done. Such a piece can
be turned out by the dozen on a band saw,
and be finished with a sander and staining.
Sometimes, detailed modelling is neces-
sary to a design, as in the Celtic bird brooch
where the various levels are sepa-
(Fig. 127),
rated by texturing and modelling, and im-
—
portant elements are emphasized in this
CAT CARD HOLDE.K case by textural lack. Incidentally, this par-
Styl'uad, stainad bUckor mahogany ticular design emphasizes another point:
Fig. 126. You don't have to stick to the letter of the
original design if you are changing me-
The ibis and the duck (Fig. 125) are inter- dium. The original was a small cast-brass
esting because of another shortcut. Body brooch; mine was a 6-in (15-cm) bird carved
shape is the same, but various species are in low relief on vermilion wood, where it
suggested by altering neck and leg lengths was the subject of view, not primarily a
and positions. This standardization makes decoration. So I intensified some elements.
preparation of blanks quite simple. Also, vermilion takes a high polish from the
Because some animals are so familiar in cutting tool, so some texturing and model-
general outline, it is possible to conven- ling was necessary to make the carving
tionalize or even alter or distort that outline stand out. I could, of course, have sanded
slightly and produce a recognizable an-
still the whole thing and blurred the lines.
imal. It is, perhaps, a form of caricature. Contrast the Celtic bird with the animal

Fig. 127.

Gouqe dots
in trench

Vermilion -EJT-^

CELTIC BIRD BROOCH-a modification CELTIC CARDINAL

80 CARVING ANIMALS
 Fig. 128.
ANIMAL PANELS
Shower-Curtain designs in Ckiapas,!i«x.

panels (Fig. 128). These are obviously Vamer doi»tls

adapted to —
incising mere carving of the
outlines —
on a flat surface or to shallow
bosting and roughing of the background,
so the elements stand out. Wavy lines un-
der some of the animals could be incised in
either case,and color could be used or the
background roughened to increase the con-
trast. Note that the veiner, which makes

these fine lines, is an essential adjunct to

either knife or chisels. In fact, these designs
offer so many possibilities in interpretation
Ebony Bah
that copied them from a shower curtain in
I

—
Mexico and haven't attempted to carve
OWL
them as yet. The panels and the cardinal
(Fig. 95), incidentally, provide an answer to
that perennial question of tyro carvers,
"Where can I get new ideas?"
Another example of careful use of textur-
ing to obtain a pleasing effect is the owl Fig. 129.

from Bali (Fig. 129). It is, of course, a styl-

Fig. 130. bU/\K Bali primitive Painted black, wkite lin«dott«d)

CARVING ANIMALS 81
 —

COW SKELETON
nsertad hornji 'tail -Cops
Fig. 131.

ized owl, so its "feathers" are simply out-

lines. The "rays" around the eyes are used
to add emphasis to the eyes and bill as well
as to give the "ears" shape. However, a large
part of the body unmarked except for
is

occasional pairs of veiner lines to empha-

size the curvature. The boar (Fig. 130) con-
trasts with it in that it is much more true to
life; it has wrinkles and bends and even

some white lines painted on it for wrinkles,

aseemingly unnecessary addition as far as I
am concerned.
Modelling is obviously necessary for the
cow and dog skeletons (Figs. 131, 132)
which all in reality. The
aren't skeletons at
ridges in spine and
and the slots in legs
ribs
suggest a skeleton, which is belied by the
complete head. These two, by the way,
were made by Indians in the village of San
Martin Tilcajete, Oaxaca, Mexico, who are
Fig. 132 (above).
primarily farmers and adobe makers. These
Indians have become well known, how-
ever, for their carvings of similarly designed
human skeletons, popular in Mexico to cel-
ebrate the Day Dead, November 1.
of the
Painting such figures would be rather ab-
surd, even though they are carved in copal,
a soft and very white wood.
A stylization somewhat akin to these is
the armadillo, from the same town (Fig.
135). Here the carver used knife cross-
hatching to suggest the scaly coat of the
Fig. 133.
animal, but again used no color. A very
elaborate and imaginative sculpture from
CEREMONIAL this town is the two-headed monkey, which
DRUMS is about 10 in (25 cm) high (Fig. 134). I am at
a total loss to explain thesymbolism, and
(Hollowed loo,s)
the carver had nothing to say; he felt it was
5. Pacific strong enough to live without explanations.

82 CARVING ANIMALS
 By Aqostino Cruz, in copal

STYLIZED ARMADILLO
Oaxaca (opal, with k.n>fe arooving

Fig. 135.

Gouac cut*

?-Ht(\DED
MONKEY
as scales

rljh ~
Guerrero, M<?x.
S«.rpant
Fig. 134. Fig. 136.

Strangely, he provided scales on the 133). The carving is simple and strong, and
monkey body with random crisscross lines, only resembles people by coincidence. Ac-
as well as on the bell of the trumpet-shaped tually, these faces represent spirits, and are
object the monkey is holding, and drilled highly colored in consequence.
holes at dog head and slots in
the base of the Another example of this is the little fish
the bell of the trumpet. The result is a con- from Guerrero, Mexico (Fig. 136). It is deco-
versation piece, if nothing more and one — rated with gouge cuts, but also has stylized
that was snapped up by a Mexico City col- color to suggest the trout that inspired it.

lector. The ultimate in present-day stylizing and

Some carvings almost cry out for strong use of color is the bebek, or dragon duck,
lines and color. Examples are the cere- from Bali, a ritual object carved with a hid-
monial drums from the South Pacific (Fig. den compartment in its back for prayers to

GIANT DOME TORTOISE

6AIAPAG05 ISLANDS, ECUADOR

Fig. 137

CARVING ANIMALS 83
 Red in mouth & around h«ad for KiqKligKts

Hidden compartment on back

>/ing

Fig. 138

L\qm qrtan or b rO'*"

| ,
MS 1

color black as shown,

witV qold hlo^liqUts ld n_
BEBEK (DRAGON DUCK) w, n^u

the gods (Fig. 138). It is made in parts and ily adaptable for any purposes you may
carved in very great detail, then highly col- have.
ored and gilded. There is no likelihood that First, there are those odd scraps of wood,
it will not be noticed regardless of location, too small to be useful and too big or of too-
because the original is life-size! Designed good wood to throw away. An enterprising
for religious purposes, it has become a spot Indian in Michoacan evidently had some,
of color in American and other homes far as well as imagination and a band saw or
from Bali, largely because it contrasts in scroll saw. The wood is a hard and dense
boldness with most moderate present-day red-colored one, unknown to me. From
decoration. It also contrasts sharply with those scraps he made a number of amusing
most modern Balinese figure carving, birds and animals, none more than 2 in tall.
which relies on flowing lines for its effects. They sold very rapidly in a smart shop a
long way from Michoacan. (Fig. 139)
I don't usually buy waste wood; I use it.

Birds are in style The swan is a case in point. Ted Haag, in

Preparing the book, "Carving Birds in Tualatin, Ore., enjoys sending me odd bits
Wood" (Sterling, 1984) apparently stimu- of diseased or spalted (partially dry-rotted)
lated my bird buds or heightened my dor- wood with an implicit challenge that I re-
mant birdwatching, because I've since cycle them. The latest example is the swan
found and made a number of birds, all new (Fig. 140), whose body is spalted curly
to me, some species dating back a thousand broadleaf maple, and whose head and neck
years and more. Most are Mexican, but are my own knotty and off-color scrap of
some are not, and they embody ideas read- walnut growth wood. The shape of the

84 CARVING ANIMALS
Fig. 139 (right). Five birds,two
rabbits and a fox were obviously
made from scraps of hardwood. They
are Mexican tourist items, so as much
as possible of the "carving" has been
done with a saw, but designs are one-
of-a-kind to fit the scrap and quite
imaginative.

Fig. 140 (below, left). Assembled and

carved from otherwise useless wood,
this swan has considerable "color"
from the figure of its walnut growth-
wood head and neck and the feather-
like coloration of the spalted curly
broadleaf-maple body and tail. The
spalted (partially dry-rotted) maple
block has been "stabilized" by
soaking in paraffin, so neck and tail

pieces had to be nailed in place.

Here are the

Fig. 141 (below, right).
rough-sawed walnut head and neck,
and the body block of maple,
together with another thin section of
spalted maple.

3V4 x 5 x 7-in maple intrigued me, but it anyhow — with finishing nails supplement-
was weeks before I saw the swan in it. The ing the glue and such finish as I could ob-
maple, incidentally, was so near rotted that tain over wax, which is a finish in itself.
Ted "stabilized" it by soaking it in hot paraf- Mexican examples come from Apaseo el
fin, which gives it body and makes it cut Alto, Guanajuato, where I visited a family
easily, but utterly defies glue and finish "carving factory," Tonala, Jalisco, which has
when you make an assembly. I made one recently produced a number of very color-

CARVING BIRDS 85
Fig. 142. Korean wedding drake
(see "Carving Birds in Wood" for
details). This was probably the
inspiration for the swan, which
has now been equipped with a
double gilt tassel.

Figs. 143, 144 (below). These

miniature birds are from designs
in ceramic of the Acoma, New
Mexico, pueblo. They are
finished with black-painted lines,
but could be done with carved
lines. Note the reversed head of
the bobwhite and the tricky eye
designation.

OWL Acoma, tm. BOBWHITE

Fig. 145.The drawings for the

large ceramic bird in Fig. 148.

517UZED KINGFISHER
/lefual \anqth~/C="
White <C/> black S brow»i

Owl and flying-bird pendants are carved

Fig. 147.
from cowbone, bleached and buffed, and look like
ivory at a fraction of the price. Fig. 146. EAGLE -5ty i.-z«M'

86 CARVING ANIMALS
 Fig. 148. One of a series of
large (16-in-long) ceramic
birds, this stylized
kingfisher particularly
appealed to me as a
woodcarving design.
Compare it with a picture of
an actual kingfisher in a
guide book to learn the
elements of caricaturing
other, more common birds.

recognizable by species,
ful stylized birds uncovered three birds which are not part of
and two very ancient examples in pottery the family's regular production of carousel
that I copied in wood — the originals are in horses of all sizes from 4 in to 4 ft tall. As
the Rockefeller Wing of the Metropolitan nearly as I could discover, all were experi-
Museum of Art in New York City. The two, mental designs, and one of a kind, prac-
interestingly, were both ducks, indicating tically speaking, although I did find two
that the current rage for decoys has ancient similar ducks, both only slightly stylized.
ancestry Incidentally, do not dismiss pot- The dove (Fig. 150) has an inflated body and
tery as a source of carving patterns; the tiny small head, a stylized wing and an ex-
V/i-in owl and bobwhite (Figs. 143, 144), as
well as the stylized kingfisher (Figs. 145,
148),were also originally in pottery, the first
two in New Mexico and the third in Mexico.
OlnwcGZoo-JdOBC.)
These three are the only ones for which I
Afaho<$arvv-7x8y2.
have suggested color, although the Olmec
OriQi'nal i * ceramic
and Colima ducks undoubtedly once had
color too over their pottery.
Mexicans are adept at substituting cow
bone for ivory in such pieces as the owl and
bird pendants (Fig. 147). The owl pictured is
VA in tall, the flying bird twice that in
length. Bone can be bleached and polished
by buffing until it looks very much like
ivory, and can be carved with similar detail.
In a visit to a "factory" in Apaseo el Alto, I

DUCK" 7" Jong

Criole or sabinc wood

Fig. 149.
These pieces (except frog) from Apaseo el Alto, Gfo. Fig. 150.

CARVING BIRDS 87
Fig. 151 (left). I thought this Olmeo river duck, Fig. 152.This puff-cheeked and ball-bodied
originally a ceramic jar with a hole in the top of the duckling is from Colima and dated the second or
head, was quite an interesting design so I copied it third century A.D. Note the stub tail and the merely
in available Honduras mahogany 7 in tall. The suggested feet, plus a bell-shaped mouth. The
original is dated 1200 to 900 B.C.— so this is a 3,000- original was a container with a hole in the top of
year-old decorative decoy. the head.

tended trefoil tail. The eagle (Fig. 146) has road runner an obvious conces-
(Fig. 153),
completely stylized feathering and a sion to ease of quantity manufacture from
lengthened head which contributes to his sawed planks, because his body is 5 x 13 in
morose or doleful look. but only TVi in thick. The eye is a double
Also apparently from Michoacan is the inlay of ebony within a lighter-colored

Fig. 153. Also a Mexican tourist item is this life-size road runner. Eyes are inlaid and decoration is
a series of cuts with a circular saw on crest, wings and tail. A base replaces the normally difficult
creation of feet and legs.

88 CARVING ANIMALS
 SW7\l\|-3*x9>/0' Ebony ins«rt These slabs become iai I

An assembly of Scrap.

FRONT
^ ->

_/

Fig. 154

Fig. 155. Potential "factory" designs are these three birds from Apaseo el Alto, Mexico, the dove
in a local mahogany, and the other two in woods unknown to me.

Inlaid

RUNNER
€Cl\<zs)

Fig. 156.

CARVING BIRDS 89
 Figs. 157, 158 (left and
ibelow). Stylized armadillo
sfrom Mexico. Tail is
•inserted, as is typical.

wood, and the decoration on crest, wings

and tail is a series of grooves cut with a
circular saw. However, he is in a good wood
and well polished.
The swan (Fig. 154) is an example of ser-
endipity: the unusual shape of the body
ARMADILLO (Mexico)
block suggested the design. In a sense, he
is also a variation of the blocky Korean wed-
ding ducks (Fig. 142), which I have
of
made — and sold — more than a dozen, and
can be adorned with a similar double tassel
at the base of his bill —
or so my wife has
decided.
All of these birds are stylized to a greater
or lesser degree, of course; neither the Indi-
ans nor I seem particularly interested in
carving from although they have better
life,

opportunities than I do to study their sub-

jects. Also, in sharp contrast to their ten-
dency to paint animal carvings, the painted
bird is a rarity except for cheap miniature
decoys produced for the American market.

Caricaturing and stylizing animals

The basic rule of caricature, as opposed
to crudity, is that the designer empha-
sizes — —
subtly true characteristics and pe-
culiarities of a particular subject. It is much
the same with stylizing; you formalize and
simplify the distinguishing characteristics
Fig. 159. Three pieces in soft stone, the alpaca (left)
without destroying the overall semblance
— —
and llama in soapstone from Chile and the pony
of the original. Stylizing, however, stresses in red feldspar (Brazil). All three are polished; none

general shape and form at the expense of has rough or hard edges.

detail, while caricature highlights notable

features of a given subject and, thus adds stocky body and some suggestion of a dif-
detail. In either case, you must be familiar ference in attitude from that of a giraffe.
with the subject. Lengthening the long The figures shown here come from many
neck of a giraffe is not enough; the head and places and are done in many different
stance must be a giraffe's as well. A pig's ways. Some are from Latin America, where
snout and tail must be accompanied by the life is still comparatively simple, where the

90 CARVING ANIMALS
Fig. 160.Monolithic and stylized, this life-size duck Fig. 161. Heraldic lionby Domingo Fernandez
was shop in Java. The body is fine-lined all over,
in a Rimachi, self-taught Indian carver of Cuzco, Peru.
with a few ruffled wing and tail feathers projecting. Wood is cedar, and the piece is about 18 in (46 cm)
Eyes are carved, not glass, and the entire bird is tall,a decorative boss. Note that the mane is
tinted in soft colors. elaborately detailed although stylized, and that six
front-leg claws are shown instead of eight.
carver is still quite familiar with nature and
unaffected by the artificiality and sophis-

tication that warps our sense of humor.

Some are meticulously detailed, such as the
wood armadillo in Figs. 158, 159 (compared
with Fig. 135), while others, like the alpaca
in Fig. 160, are virtually stripped of it. The
heraldic lion from Peru (Fig. 161) still re-
tains a great deal of realism, though the
shapes have been simplified and for-
malized. By comparison, T. E. Haag's Cat
and the Fiddle and Adder and Eve (Figs. 164,
165) retain only the barest suggestion of the
original subject —but it is there nev-
ertheless.

Fig. 162. Owl from Guerrero

is in strongly grained
granadillo, and has inserted
beak and double-insert eyes
that characterize pieces from
this area. "Ears" have drilled
holes and the claws are
delineated, though feathers
are not even suggested.

STYLIZING ANIMALS 91
 —

The owl and cat caricatures in Figs. 162, the suggestion of a smile —a smile, but not a
163 have painted-on comic features. The horse laugh. Remember: Something must
other animals in Fig. 166, from Argen-
all be left to the observer's imagination, some-
tina, also have painted eyes and pupils thing that will repay his observation by stir-
black for a male, red for a female and a — ring an emotion (usually humor). The stir-
silhouette effect enhanced by using a ring should not be done with a club, as is so
thicker block for the body. The cat even has often the case.
Bull and fawn (Figs. 167 and 168), from
Spain, show excellent stylizing. The bull
breathes power, the fawn airiness. Both rely
Vtont in5«rts on simple sawn silhouettes convey their
to
characteristics; the bull is thick, with horns
ready, while the fawn is carved thin and
leaping. Very little shaping has been done
on the fawn, and none on the bull. And
both abandon rigid reliance on wood. You'll
notice that the fawn's tail is a bit of rough
cord, frayed, and that the bull has inserted
silver-strip horns and tail. Now compare
these to the penguin in Fig. 169, which uses
CAT CARICATURE Fig. 163.
sharp contrast for its effectiveness. The
simple form is painted to simulate the

Fig. 165(above and right). "Adder and Eve" and

"Cat and the Fiddle," by T. E. Haag, Tualatin,
Oregon. Though extremely stylized, subjects are
still identifiable because basic elements such as
bosom and bottom, fiddle-string ends and ears are
emphasized.

92 CARVING ANIMALS
Fig. 166. Three
Argentinian animal
caricatures have the same
painted-in eyes, the cat's
with blue lids! They are
assembled sawed pieces,
but could readily be
modelled.

Fig. 167 (above). Stylized bull from Spain is in a

dark, grainy wood. It is dVi in (17 cm) overall, with
inserted silver horns and flat tail. There is no
detailing.

Fig. 168 (left). Spanish fawn is in olive wood, so

grain is very prominent. It is quite stylized, but
very whimsical, having a bit of cord for a tail and
prominent downcast eyes.

STYLIZED
PENGUIN
TE.HaagUS
Maple
Figs. 169 (above, left
to right). Penguin by Ted
Haag is a simple form,
with no detailing except
Black
the black painting to
simulate the darker
feathering. It is 4 in (10
cm) high.

STYLIZING ANIMALS 93
 Fig. 170. This
spreadwing bird in
ironwood has only a
suggestion of
feathering and a
streamlined body.

darker feathers; again, there is no detailing, as well as real animals. They are very defi-
not even an eye. nitely stylized, particularly in the fantastic
The Seri-Indian-carved birds and fish in waves and ground growth, but also include
ironwood (Figs. 170, 171) are unusual and much more detail than anyone would use
compelling because they are readily identi- nowadays, even the Japanese. It is hard to
fiable. The shapes are realistic, but only a —
avoid over-detailing take it from an ex-
minimum of detail is included so that form engineer!
and the beauty of the polished wood be- With a little experience and effort, you
come most important. can do your own stylized carvings and have
What is considered over-detailing in one fun at them. The primary requirement is to
country is often the essence of stylizing in study your subject to find out what is dif-
another. Americans think 30 to 50 percent ferent or dominant about it, and then to
of a surface is enough carving, the Italians combine those elements in a pleasing de-
go to 80 percent or thereabouts, and the —
sign with smooth, long curves and lines.
East Indians go to 100 percent. Consider the The little variations are eliminated, and
Japanese temple carvings in Figs. 172, 173. geometric shapes can then be substituted.
They are 200 years old and include fanciful

Fig. 171. A 12-in (30-cm) Sailfish in

ironwood emphasizes the dorsal
fin, which shows ribbing.

94 CARVING ANIMALS
 and below). Extremely elaborate stylizing is evident in these two sections of temple
Figs. 172, 173 (above
carving in Honso, Akita, Japan. Done about 200 years ago, it includes dragons in stylized waves and a
tortoise amid mushrooms and reeds, all originally tinted. Photographs are by Donald P. Berger, an
American teaching in Tokyo.

Why not a cat? Mexico, a caricature in Sri Lanka, and a

Cats are a neglected carving subject, for stylized-cat cardholder in Israel.
some reason. Pasht, the cat-headed god- The infrequent cat carvings in foreign
dess holding a sistrum, was familiar in an- countries are understandable; in many
cient Egypt and the cat was also a frequent countries cats are scarce as well. In Haiti, as
element in sculpture there. But, although a gruesome example, my landlady had two
cats are quite familiar pets in the United cats which she kept caged; earlier ones had
States, one rarely sees a carving of one. I disappeared by way of poor and meat-
know of only one carver who frequently starved neighbors. Here there are many
carves kittens, Hope Brown of Brasstown, cats, cat shows and even cat-owners' maga-
N.C., and she does a very good job of it. In zines, but few cat carvings, possibly be-
years of travel to foreign countries, I recall cause most cat lovers are women and most
seeing only a few cat carvings, one or two in carvers are men. Probably more important

WHY NOT A CAT? 95

 Fig. 174 (left). This cat with hanging tail
was carved by a skilled Mexican for sale
in a West Coast art shop. The shaping and
tinting were exceptional. Horsehair was
used for whiskers.

from the
Fig. 175 (above). Sitting cats
Southern Highlands. The one on the right
is abetter-proportioned, more-natural
pose. Both are in cherry, whittled and
sanded.

Fig. 177 (below).

This 6-in kitten in
walnut was an early effort of mine — at
least 40 years ago. It is just passable.

Fig. 178. This kitten face

provides agood indication of
the triangular head shape and
relatively low eye location.

3 SILHOUETTES
96 CARVING ANIMALS
 is the fact that a cat is very difficult to carve
well, although this argument breaks down
in the face of the number of carvings of
other members of the cat tribe: lions, leop-
ards, jaguars, tigers, mountain lions. All
offer the same basic problems in carving, so
why the big cats in greater profusion? This
is understandable in countries where lions
are almost worshipped, as in Africa, or jag-
uars, as in parts of Mexico.
The fact is that if you can carve a good cat,
you can carve any of the others. The lion
has a larger nose, a bigger head, and heav-
ier forelegs than any of the others. The
leopard has a longer nose, as does the
puma. Our domestic cat carries its tail high
when prowling; all the other cats carry
theirs low — but these are minor differences
Fig. 180.This caricature was turned out in quantity in shape, just as are the male lion's mane
some years back in Sri Lanka (Ceylon). The tail and
and the leopard's spots.
ears were carved separately and inserted, as were
moonstone eyes and nose, although the cat is only The cat's hind legs appear to be longer
about 2 in tall. Also see Fig. 163. than the forelegs and are much heavier in
musculature. The fur is usually thick
enough to hide and round the skeletal
shape, yet fine enough that it cannot be
suggested successfully except in very large
carvings. On
any small carving it is best to
consider the cat's shape as a series of curves
and its fur is best depicted by a smooth,
even glossy, surface. Body lines at best are
indistinct, and there is danger that they will
be overemphasized as most carvers over-
emphasize the wrinkles on a human face.
The cat head is quite round in back, but
from the front it has a distinctly triangular
shape, with the point of the chin and the
ears forming the angles. The ears are quite
frc>™ pert usually, but are not pointed at the tips;

life they are actually delicately rounded. Also,

the front of the jaw is quite narrow, al-
though the face itself is very blunt when
viewed from the side. Study the sketch of a
cat head (Fig. 181) and the frontal view of
the kitten-pin silhouette (Fig. 179). Note
that the eyes are not high on the head and
Fig. 181. Cat head sketched from life. Note the
blunt face, low and forward-faced eyes, perky ears, around to the side as they are in rabbits and
receding lower jaw. The mature cat has feeler hairs
in its eyebrows as well as around the mouth. Hair
—
deer those animals have to expect attack
direction is also suggested here, in case you are
from the sides, rear and even above. A cat
carving a head large enough for such detail. does not, so its eyes are almost centered on

CARVING CATS 97
 —

carver of one cat pictured did, and he added

another fillip: he projected the tail below
the foot line, so his cat can be displayed
only by being placed on the edge of a
shelf —
which makes it look very natural
(Fig. 174). The Mexicans also use horsehair
on their jaguar heads, plus horse teeth on
larger mask sizes. The result is considerable
realism. My suggestion is that you study a
cat when opportunity offers; note the dif-
ferences in the way and a dog sit,
a cat
stand, lie down. Study the head shape
and go to it!

Dogs and horses are popular

Many people who have pets or favorite
animals are interested in having likenesses,
not of the breed or species, but of their
particular animal, particularly if that favor-
ite is getting old. And animals are as indi-

vidual as humans when you study them;

each varies a little from the norm, and the
owner or admirer is very conscious of those
variations.
I remember two of my early attempts at
likenesses of animals almost 50 years ago.
One was an Arabian mare, the other a bull-
dog, and I pictured them in my first book,
Whittling and Woodcarving (Dover), in 1936.
In each case the owner provided profile
pictures or the equivalent, but I learned that
KITTEN5 5uck« Y « Ho P « >rovn
Bi it requires several photographs, and prefer-
ably a chance to study the animal, if you are
Fig. 182.Hope Brown's curled-up kittens from the
going to get a likeness that will satisfy the
Campbell Folk School are sketched here for
comparison with the Siamese cat head in Fig. 178, proud admirer. What's more, an animal
the Siamese in Fig. 174, and the sleeper in Fig. 177. anatomy book will provide you with some
basic understanding of skeleton and mus-
the skull (as human eyes are) from the culature that photographs often obscure be-
front,and they also face front and are only cause of the lighting or the animal's pelt.
about an eye-width apart. I have reproduced these early likenesses

The final problem in depicting a cat are here. "Honey Girl" (Fig. 183) was in ma-
those long whiskers. I have tried to suggest hogany and mounted on walnut. Note how
them by incised lines on the upper lip (Fig. the grain helped show the swell of the neck.
178), but this is a subterfuge at best. The "Bill" (Fig. 184) was also in mahogany and
Mexicans have done better. They actually similarly mounted. Both had leather addi-
drill small holes in the upper lip and insert tions, the harness finished with silver
individual horsehairs. They can also thus buckle and snaffle, and the collar a section
suggest the feeler hairs projecting from a of an actual dog collar with brass nameplate
cat's eyebrows. That's what the skilled and chain. I think the leather harness

98 CARVING ANIMALS
 .

Fig. 183. I carved this

mahogany-on-walnut
portrait of Honey Girl,
a prize-winning Arab
mare, almost 50 years
ago. Harness is cut
from thin leather and
fittings are silver.

Fig. 184. Bill was an

aging bulldog. I carved
him from mahogany
and, again, used a
walnut base for
mounting. Collar is a
section of a real one
chained to the brass
plaque with a screweye.
The head is about 3 in
(8 cm) tall.
 Fig. 185. Fig. 186.

MAMSELLE ' Fimale lom^-haircd St Bernard- Bass wood

Figs. 185-187. Mamselle, a female St. Bernard, was carved in basswood and painted with oils. Some knife
lines were and some paint rubbed thin to retain the idea of wood. Fig. 185 shows one of a series of
left
photos I took to try to get the lifted foot and tail the owner wanted. Dog was carved integrally with base,
which was then appliqued on a rosewood base block.

added something, but the dog collar was a examples of

In this section are additional
overpowering, and I'm fairly certain that
bit dogs, which are the most popular subjects.
if either carving is still extant, the leather The female St. Bernard (Figs. 185-187) is in
trim has rotted away. No trim, or a carved the round, and desk-size, 6 in (15 cm) long,
harness or collar from the solid, would have finished with oils, while the setter panel
been better. Both were, however, finished (Figs. 188, 189) is natural-finish except for
with low gloss, of which I'm proud. the darkened or antiqued background. The

100 CARVING ANIMALS

Figs. 188, 189. Walnut panel of Ludi, a seven-
year-old Irish Setter, is 3/4 x 11 x 12 in (1.9 x
28 x 30 cm) overall. It was carved by Hugh
Minton, Jr., of Aiken, South Carolina. Much
of the carving and all of the texturing was
done with palm tools; background was then
antiqued with walnut stain to make the head
stand out.

Fig. 188.

Fig. 189.

setter was carved by a student who pre- had adapt that from a magazine picture
to
viously had used the knife almost ex- of another dog. Also, he had normal ears,
clusively, while this carving was done not lopped ones, and he carried both ears
mostly with palm gouges. and tail down because of his concern over
Although a St. Bernard and a schnauzer the photography. I decided on myrtle wood
(Figs. 190-196) should be relatively alike in because of its grey-white color, very much
difficulty,hence in time to carve, I found like that of the dog, instead of painted
the schnauzer twice as difficult. One factor white pine or basswood, so that added
was size, another the wood, and hence the complications. As completed, the carving
texture and finish. I had photographs of required only a slight tinting around the
both dogs, and each pattern had to be a jowls to get the characteristic head colora-
composite of elements in several pho- tion and likeness, and is much more real-
tographs. But the schnauzer, cowed by the istic and natural than the St. Bernard por-
camera, never did strike the basic "show" trait.

pose of the breed that his mistress wanted; I

CARVING DOGS 101

Figs. 190-193. Rarely will one photograph
depict exactly the personality and
peculiarities of a particular animal. The
one above shows body shape and proper
ear pose. Myrtle wood gave coloration
quite close to the dog's, while touching up
nose tip with black, eyes with brown and
eyebrows and face hair with gray (below)
created a recognizable and individual
portrait. White pigment was also tipped
Fig. 191.
on feathery hairs of lower legs.

Fig. 192. Fig. 193.

Getting a likeness the muzzle, a definite goatee line around

In any likeness of a pet, you must be con- the mouth, a forward and alert pitch of the
scious not only of the visual distinctions to ears, a straight back and multiple-curved
your untrained eye, but also to the real or hind-leg line, etc.

imagined distinctions that the owner sees, These elements are essential to a likeness
particularly those he or she considers im- because the client sees his animal ideally.
portant. Thus a schnauzer is supposed to You, as a stranger, will rarely see all these
have a hollow under his belly that accentu- things together, and are even less likely to
ates his chest curvature, coloration around capture them in photographs. Also, photos

102 CARVING ANIMALS

 Figs. 194-196. Here is another recognizable study of
the dog, this one a caricature rather than a likeness.
Eyes, eyebrows and nose are emphasized; face hair
is only suggested. Because this is low relief rather

than in-the-round, some contours must be

accentuated and others played down as seen in the
next two stages of carving. Note knot in center of
forehead and check running down nose from it.
Both were filled with glue and sawdust, then
sanded and tinted to match adjacent wood.

Fig. 195. Fig. 196.

are two-dimensional; you have a third di- fluter and took almost a day and a half. The
mension to recreate, usually by trial and eyes, set deeply behind shaggy brows, and
error. In this case, the block was half of the the feathery character of the lower legs, also
original 7-in-diameter (17.5-cm) tree trunk, took extra time to achieve.
so I had to guess at the proper thickness to I mention all these things to draw the

saw the blank. contrast between a likeness and a simple

The schnauzer has amore complex head depiction. It is reinforced by the low-relief
shape than the St. Bernard, and the dif- head of the same dog I carved from the
ference in wood is also a delaying factor. But remainder of the slab of myrtle about 6 x—
the major expenditure of extra time was in 6 x 1 in (15 x 15 x 2.5 cm) at its thickest
the meticulous texturing of the dog's pelt, (Fig. 196). This head was laid out by eye
which was done with small veiner and alone (no laborious squares or point-to-

CARVING DOGS 103

 point), sawed to a rough silhouette, and
shaped with a V^-in (12.7-mm) flat gouge
while held to the bench with a carver's
screw. The rough shape of the head was
achieved in about an hour, and the head
was finished with smaller gouges and a V-
tool in a few hours more, or less than a
fourth of the time required for the scaled
likeness.
Perhaps to anyone except the owner, the
head is as dramatic and interesting as the
full dog, even though its proportions are

not exact. The left eye, for example, is set

too deeply, texturing is rough and only sug-
gestive, and the mouth and nose are not
detailed. These examples emphasize the
differences between a quick study and a
portrait.

Fig. 197. Fig. 200. The Bonkura horse is made in various

materials and sizes in northern India; it is a
stylization of an old time warrior's horse or a
trader's horse, according to different stories.

PRANCING HORSE
Ctaryy -Jack Hall

Figs. 198, 199. A horse in cherry by the skilled Jack Hall

and one by a Mexican Indian. Note contrasts in
proportions. (See Fig. 204)
(Circus horses can be found in Appendix I.)

104 CARVING ANIMALS

Fig. 201. Two running horses by Eric Zimmerman in curly buckeye wood.

Fig. 202. Mexican cari-

cature, 4 in (10 cm) and
Chinese horse 2 in (5 cm).

Fig. 203.
RECLINING HORSES
CARVING HORSES 105
Fig. 204.Cherry prancing horse Fig. 205. Small size breadboard in cherry with stylized horse
sketched in Fig. 198, an original by the motif. By the author.
late Jack Hall.

^
>*e

\4'

fdfn sing behind tf)<? plough- Vl'j&F d'<

Fig. 206. Commemorative relief panel in walnut, based — in part—on an old silhouette.

A dinosaur mobile you. Ichose dinosaurs as an unlikely sub-

Mobiles can be interesting whittling proj- ject, because they varied so in shape and
ects for a number of reasons. They are flexi- size and because relatively little is known
ble in number of elements, size and about them.
composition. Elements may be alike or dif- Wood can be selected for color and fig-
ferent, and need not all be of one wood. A ure, because dinosaur colors are not known
mobile can offer an opportunity to work, anyway. I also disregarded relative time and
compare and display a variety of woods. size of species, so they are not in scale and
Further, the number of elements is up to species may have lived millennia apart.

106 CARVING ANIMALS

 Eaq-Uyinq dinosaur

PROTOCERATOPS&EGG,
SABRE-TOOTH TIGER EARLY TAPIR (?) /^/
IC dowel

5TEG05AURUS TRACHODON*
1

DIPLODOCUS
( La rq est- 50 tons)

Nam whi-ffletreff-Ucq'd, 3" long

ErVfOPS
(Music wire retains natural curve -fronr\ coil)

UNITS FOR A DiNOSMJR MOBILE (Abo*)

3" wkifirietree-2re^<J

-t'u/hiffUVret-Zrcq'd

NEANDERTHAL
MAN TYRANN05AURU5
Some of the figures were carved in the
round, but some were flattened to catch
vagrant breezes and because only thin
Fig. 207. GLYPT0DONT
scraps were available.
I used vermilion for the stegosaurus, test these woods comparison with the
in
jelutong for the man, rosewood for the teak of the triceratops, the maple dowel that
pteranodon, mansonia for the sabre-tooth gives a starting shape for the egg, and pur-
tiger, and an unknown wood from a Viet- pleheart for the big diplodocus, largest of
namese crate for the trachodon. This was to the dinosaurs.

A DINOSAUR MOBILE 107

 UNITS FOR ADDITIONS ARMS
Th«se designs arcadapW from »kffch«s

in "National Geographic" miqazint for

August 1378, which show more details

5TRUTH10H1MUS so,ooo,ooo v , PLATE0SAURU5 awo»^

Flat-qouqe scallops

Spurs

ANKYL05AURU5 135.000,000. rs. TARB05AURU5 135.000,000, rs.

" 45, 000, 000 yry

195,000, 000 yrs.,//' \\ |

f1EGAL05AURUS CORYH05AURU5

SIRUTHIOMIIiUS (Running alternate)

IGUANODON W5.ooo.ooo
yrs.

ARCHEOPTLRYX uo,.*™^
(Olcitsl Known Wrd)
ANAT05AURU5 45,000.000^.
Fig. 208.

108 CARVING ANIMALS

 Purpleheart, by the way, is extremely Begin assembly from the bottom. The
hard —somewhat ebony, but not as
like brit- general principleis to pair off two elements

tle —and has occasional checks and faults. of approximately equal weight, one tall and
These secrete a black dust which must be one wide, and differing in color if possible.
cleaned out before gluing or filling. The The wide one must clear the support thread
wood itself an ordinary brown, but
is for the tall one, or be hung below it. Leave
lengthy exposure to the sun turns it lav- the threads long and double-knot or slip-
ender. Heating it in the oven can turn it knot them at the whiffletree, because single
anything from lavender to a dark purple, knots will promptly loosen and come free.
with thinner sections darkening first. Man- Considering that the whiffletrees are rela-
sonia, by contrast, is a tannish-brown wood tively heavy compared with the figures,
that splits and splinters easily, somewhat they will actually make balance easier. This
like some mahoganies, but it finishes very is important, because even the usual postal

well. scale will not read accurately enough to get

Figures were finished without sanding, exact weights of the elements and it is pref-
because the small planes left by the knife erable to have the whiffletree hang almost
will reflect light. Figures were sprayed with horizontal to keep the threads it supports at
Krylon® matte varnish to keep them clean, maximum distance apart. Knot a thread
but finish, at least of harder woods, can over the center of the whiffletree and move
simply be wax if you prefer. To suspend it until the elements below it balance, then
them, I drilled small holes at the center of glue it in place.
gravity and glued in eyes bent from straight Assemble the second short whiffletree in
pins. The proper point for suspension can the same way. If your mobile is to be wide,
easily be determined by a little trial and you'll tend to balance two elements against
error with a pin. Monofilament nylon two. be long, you'll tend to balance
If it is to
makes a good suspension thread, but must two elements against a single one on the
be double-knotted and glued to keep the medium-length whiffletrees. Other whiffle-
knots tight. Initial length of the nylon tree assemblies are made just as the first
should be about a foot, to allow for later one was. A particularly heavy element may
adjustment. have to hang alone, or be balanced by a
At this point, you must decide whether light element hung from the center of a
you prefer a wide mobile or a long one, and smaller whiffletree supporting two others. I
cut whiffletrees (balance beams) to suit. I did this with the man, the pteranodon, and
wanted one that was longer than its width, the diplodocus. This also serves to fill in
so my top whiffletree was 10 in (25 cm) long, otherwise open areas of the mobile and
eye to eye. Piano wire makes good make it look busier in motion.
whiffletrees, because comes off the
it coil Hang the rough-assembled mobile from
with a good natural curve and because
it is a ceiling hook or a projecting arm. I use a
polished; this tends to delay corrosion. It is dowel stuck under books on a bookshelf at
also, of course, much stiffer than other wire shoulder level, a convenient height, and
of similar diameter. I used No. 18 wire check elements for interference, as well as
(0.041-in [1 mm] diameter) for the long the general "look" of the mobile. Usually,
whiffletree and No. 10 (0.024 in [0.6mm] ) interference can be corrected by raising or
for the smaller ones, but any similar sizes lowering one of the two elements that col-
will do. The wire may have to be sawed, lide. You may want to shorten all suspen-

then should be filed smooth on the ends sions to make the mobile more compact.
and bent with gooseneck pliers. Eyes This is a matter of taste, location and
should be small and closed tight, or you —
strength of likely breezes the longer the
will be plagued with nylon threads slipping threads, the more likely they are to tangle if
out during adjustment and assembly. the wind is fresh. My mobile is about 14 in

A DINOSAUR MOBILE 109

 nUK JL '
Oajaca. Copal, pairitd ytllow

FISH Fig. 209. Primitive art of Mexico.

5P00N

FISH ASHTRAY

LIUN " Oaxaca. Copal Painted ydlow, with black in« I

(35 cm) wide by 2 ft (61 cm) deep. You may additional elements in my
mobile. Just
even have to change the length of a about that time, there was an extensive
whiffletree, particularly if you have many story in the National Geographic about recent
elements in the mobile. When everything is dinosaur discoveries. So I added two more
adjusted, glue the knots and spray the as- arms to the mobile (one long whiffletree) to
sembly with varnish to inhibit rusting of accommodate an additional nine elements.
whiffletrees. Also trim off loose ends of the These were in additional woods: ankylo-
nylon threads. saurus in Virginia cedar 8,000 years old,
After about a year, I felt that I wanted iguanodon in maple, plateosaurus in red-

no CARVING ANIMALS
 LnOLL I (Bast taper* to back & is l«ft unpolished)

wood, megalosaurus shedua, archaeop-

in
teryx in pecan, anatosaurus in walnut, tar-
bosaurus in chinkapin, corythosaurus in
basswood, and struthiomimus in Port Or-
ford cedar. (In the original group, tra-
QUAIL HEAD chodon was in pine, tyrannosaurus in
cherry and protoceratops in oak.) I have
sketched a running struthiomimus in case
you want a long and narrow element, but
his legs can be a real problem to carve un-
Fig. 210. Primitive
art of Mexico. less you select a hard and largely nonsplit-
ting wood for the figure. Assembly of this
group is similar to the preceding one, ex-
cept that in these figures I used tiny
silver eyebolts instead of bent pins.

PELICAN (6»«|eftrouqh)

Fig. 211. Primitive art of Mexico.

SKIN DIVER
PRIMITIVE ART OF MEXICO 111
 —

Struthiomimus, by the way, apparently from Indian portraits through religious fig-

lived off eggs laid by other dinosaurs, so ures to animals, particularly the llama. Both
what he is clutching is such an egg, which in-the-round and relief work are done, and
was simply a long oval. mahogany is the preferred material. The
Mobiles can be quite simple. To make a exact duplication of design and availability
"hostess present" in Mexico, I found a A x l
in several sizes suggests profiler roughing
1 x 15-in (0.63 x 2.5 x 38-cm) slat of pine for quantity production, but sellers insist
on the and whittled five birds from
street, this is not true.
it, entirely freehand and of no particular Shown here are typical animal designs.
species. They were suspended from white Surprisingly, there are no birds. Included
sewing thread through holes drilled with a are a typical pair of primitive carvings an —
knifeblade tip. The whiffletrees were thin —
anteater and an armadillo from the Ama-
copper wire from a nearby electric-motor zon basin in Peru. Drawings of three an-
repair shop. Birds and their suspending cient house posts —
over 1,000 years old
threads were dyed in bright colors red, — from lea and Paracas, Peru, offer very
blue, green, brown and gold in the dye — sharp contrast to the more refined mod-
vats at a weaving plant across the street. ern pieces.
The llama is the traditional beast of bur-
den, and the source of wool for cloth and
Animals of South America
meat for food. There are three species, the
Folk carvings in wood tend to result from
llama, the alpaca, and the guanaco. An-
a happy pairing of forests and skill; either
other familiar figure is, of course, the bull.
alone is not enough. Thus, in all of South
All of these designs appear to be the
America, there is little folk carving except in
products of woodcarving tools, except pos-
the Andes Mountains of western Bolivia,
sibly the Amazon animals and the bull, and
southern Ecuador, and northern Peru
they show gouge marks. The Amazon ani-
(which was also southern Ecuador until
Peru won it, as south Tyrol was once part of
Austria). Carvings from this high terrain, BULL SEAL
regardless of country of origin, are well- Slight Iff t tilt of head (from

formed and smoothly finished; they are not r«ar) As sKownat right. All

primitive but are obviously made by skilled lines round «d. Base left

carvers to familiar patterns attractive to rouqn.

tourists. Subject matter is wide-ranging,

ortS AIL FISH

(Rests on fins, tail)

Fig. 212. Primitive art of Mexico

112 CARVING ANIMALS

 Fig. 213.Two llamas flank
an alpaca. The figure at
the left is from Bolivia,
the other two from Peru.
Woods and facial details
are the principal
differences. The llama on
the left is carved with the
base integral, and its legs
are foreshortened. Detail
is avoided on all three.

mals are painted, then carved, so the natu- (Also see Fig. 159.)
ral color of the wood is recovered a tech-—
nique that I have seen previously in Fiji and
among Australian Bushmen. It is, of
course,now in use in the United States and
elsewhere for routing name signs in lami-
nated or "sandwich" plastics. It offers ideas
for carvers as well

LLAMA Ecuador

Fig. 214. South American designs.

INDIAN & LLiXMA HLADS ?„» uw)
ANIMALS OF SOUTH AMERICA 113
 yBSiSaB

PENGUIN SKIER
Cross-hatched ar«s d«
w 4 if^o>,

2113^ ANTEATER
Doth from Amazon Jur\qU, Peru

ARMADILLO

Black- painted surfact

South
Fig. 215.
cut aw/ay tor decoration American designs.

GIANT DOME TORTOISE

6AIAPA&05 ISLANDS, ECUADOR

114 CARVING ANIMALS

 SHOEHORN 01 IV? Wiood JOINTED FISH
Hol« for corii vt
dri'lltc) before sw-
ing into picas

PARAKEET
rower-carved with deep

V'qrooves in pine. Cutter

allowed Jo iin^e edqej

rBored IV *3^deep

ATHENA'S (MS
Olive wood

By Spyros Kokkinakes, Hydra

Fig. 216. Greek peasant carvings.

Greek peasant carvings Israel, where the same statement is even

With its considerable tradition in sculp- truer, there is a great deal of carving. The
ture, one would assume that woodcarving practical answer is probably that the Israelis
would be common in modern Greece as have built the craft, while the Greeks have
well. Actually, even carving in stone is un- lost it.

common, and practically all of that is copied The jointed fish suggests a number of
from classical models. The explanation that possibilities for other designs,although it
Greeks give is that wood is scarce, but in does involve the problem of small-diameter

GREEK CARVINGS 115

drilling almost its total length, and
for
small-diameter drills are also correspond-
ingly short. The holes can be drilled by
brazing a shank on the drill bit, or by drill-
ing to available depth, then cutting off sec-
tions until the bottoms of the holes are
reached, making certain that drill "pits" are
left in the stub to provide guides for the
next drilling step. Assembly cords are glued
into the heads. The principle can of course
be applied to articulate snakes, lizards, and
some birds.
The parakeet is modern design,
a quite
and much of the work can be done with
power tools if desired. The shape is rela-
tively simple, and the decoration entirely V-
grooves, stained or singed by a rotary
power cutter for an "antique" effect. A piece
like thiscan be quite crude and still be
effective.
The owl designs, made in olive wood on
the island of Hydra, are unusually good, in
my opinion. Owls were sacred to the god-
dess Athena, so owl motifs appear in a vari-
ety of Greek products, from pottery to
wearing apparel, but these are free-stand-
ing figures. One of the virtues of the design
is that the carver avoided excruciating de-

tail —
every feather is not delineated; the
lines suggest only general areas and direc-
tions.

Carve your own trout

A friend ASKED me to do a leaping trout for
his fishing club. We agreed on walnut,
partly because had an air-dried log 7 in
I

(17.5 cm) in diameter and relatively free of

checks. I would use a largely vertical pose.
So far, so good. But what about the
water? Anyone who has ever caught a trout rough out portion of the
Figs. 217, 218 (top). First
fish above splash level with a carpenter's saw,
knows that when he leaps there is more allowing added thickness for twist in upper body.
spray than water around him, and any Portions near base are split out and shaped with a 1-
woodcarver knows that spray and clouds in (2.5-cm) gouge and flat chisel. Upper body is
then rough-shaped with lVi-in (3.2-cm) carpenter's
are the most difficult elements to portray in gouge and lVi-in (3.8-cm) low-sweep spade gouge,
carved wood. This time I couldn't evade the with block held by carver's screw on a bench edge.
problem by mounting the fish, because we Rough outlines of fins are put in with fluter and Vi-
and Vi-in (6.3- and 12.7-mm) deep gouges. Note
both wanted an action pose. early shaping of wave and tail areas.
The best answer was to stylize the water
in one way or another. The Japanese have

116 CARVING ANIMALS

 Templates of stiff cardboard guide in body
Fig. 219. Fig. 220. Tail elements are now shaped and fins
shaping and in positioning of elements. defined and fluted. A double row of wavelets in an
irregular pattern was developed, with minor
undercutting. One-fourth- and 5/s-in (6.3- and 16-
cm) low-sweep gouges, veiner, V-tool and several
done this for some hundreds of years in
medium-sweep gouges of various widths were used
their temple carvings. They depict water as to attain variety in wavelet shape.
a sinuous, stylized wave, with small and
elaborate curls along its upper surface to
suggest spray.
In my carving, the fish had to appear
'
V**/
practically free of the water and yet be sup-
ported by it, so I designed him as if he'd
just delivered a mighty tailslap to the sur-
face to free himself of the snagged hook.
The carving is shown in the step-by-step
photographs (Figs. 217-221).

Butterfly mobiles and ornaments

Butterflies have long been a staple of dec-
orative design (several are on stamps), but
they are uncommon in woodcarving, prob-
ably because they are so fragile and so
wasteful of wood if sculpted from a single
piece. However, they do provide an un-
usual opportunity to display attractive

Fig. 221 (right). Wavelets rise higher in back, since a

trout hitting the surface would cause such a pattern.
White growth wood in back was carefully retained
to suggest spray. Right ventral fin did not project
sufficiently and was replaced by a separate fin.

CARVE YOUR OWN TROUT 117

118 CARVING ANIMALS
wood grain or figure, exotic colors, and
growth-wood and saw-cut variations be-
cause of the large and relatively flat wing
areas.
Among the attractive woodcarvings you
can make are single-butterfly curtain or
drape decorations and three-unit mobiles.
Other uses which suggest themselves are
adhesive- or magnetic-backed units, pins,
pendants, or desk ornaments, because
these designs can be almost any size.
Fig. 223. The "look" of a butterfly can be changed
I began with two fairly large swallowtails considerably by adjusting the angle at which wings
(Fig. 223) in purpleheart, principally be- are set into the body. Note wing veining and shaped
wing-edge holes. The higher the wing angle,
cause I wanted to experiment with vari- however, the more difficult is the balancing.
ations in tone and wing position. My wood
was 4
/4-in (25 mm) finished, so I could get
four wings from each blank, because wing
thickness is less than Vs in (3 mm). In this features are the antennae, which can be
species, the wings are visibly distinct from simulated with piano wire, often left with
the body, so I arranged grain to permit the natural curve of the coil,and with the
whittling Vs-in (3-mm) pegs at wing termini outer end formed into a small loop. They
to fit into corresponding holes in the sepa- may from small clubs at the base, or
project
rate body. Also, this species has some white simply from the head itself. The thorax car-
near the outer edges of the wings, so I organs of locomotion, including
ries all the
drilled holes of suitable sizes, then shaped six legs and the four wings. It is actually
them with a long-pointed penknife blade. segmented into three parts, but these are
Wings were thinned along the edges to not visible unless the insect is dissected.
make them appear thinner and more deli- The abdomen has nine segments and can
cate than they really are. The latter proved be simulated as a cone, although it varies in
easier by rotary sanding than by carving exact shape from species to species. Also,
because purpleheart is hard and resistant to the body itself can be small or large with
shaving. Veins in wings were made with relation to the wings. (If you want to be a
parallel knife cuts. purist, there are butterfly guides available.)
The color in the wood can be brought out But normally, bodies as drawn here are bet-
by heating, and it is possible to control the ter than observers will expect. Wings can be
depth of color in several ways. Wings separate pieces, or in most species can be
placed in a small electric toaster oven will combined because of the slight overlap. The
darken along edges and openings and in upper wing laps over the lower midway of
thinner sections first. Other zonal effects their length.
can be obtained by careful heating with a The principal aim is to display the vari-
propane torch, but this is tricky because the eties of wood anyway, so the wings are the
surface burns easily. Oven heating can also crucial elements. I have tried to provide
—
be used again carefully. here the major variations in shape and size,
A butterfly's body is extremely complex and a variety of the possibilities in handling
in actuality, but it can be simplified into them. The monarch is such a distinctive
three major parts, the head, thorax and and well-known butterfly that I made mine
abdomen, the abdomen normally being of pine and dark-stained the pattern over a
about the length of the other two put to- lighter-colored background. In the case of
gether. On the head, the principal visible multiple stains, it is advisable to give the

BUTTERFLIES 119
 —

wood a coat or two of flat (matte or satin) color, particularly if exotic woods are used.
varnish before the stains are applied, to It is possible also to make butterflies simply
reduce the tendency of the stain to soak in of two wings glued together at an angle
and run. The same is true if you decide to with no body at all. The wings can be thin
paint butterflies in their approximate natu- slices of burl or other figured areas, and
ral colors. Over varnish, color where you backed with a pin. However you make
don't want it can be removed by wiping or them, butterflies are very pleasing.
scratching.
Because the wings are heavy compared Making a design your own
with the body, you may have problems with Years ago, I was fascinated by the study
any support for hanging. Balancing the in- of gravestone rubbings that showed how a
sect fore and aft is difficult unless the wings had gone from
skilled itinerant stone carver
are mounted relatively flat. The bent-pin town town westward from New En-
to
method sketched is neat if you can find a gland. His designs and techniques were
precise center of balance and put the pins readily recognizable from those of both his
well out on the wings; otherwise it is easier contemporaries and his imitators. The
to make a 4-point suspension, with a hole same thing is true of familiar woodcarving
in each wing, so the insect can be posed at designs; they may be "standard" but, un-
the desired angle front and back as well as less they are turned out on a duplicator,
side to side. Whiffletrees (balance beams) there will be slight but identifiable vari-
for the mobile are made of No. 18 or No. 20 ations piece to piece. This is true whether it

piano wire for the longer one, No. 10 for the is all the work of one carver or that of several
shorter. Each whiffletree need be only long in turn. have seen copies of my designs
I

enough to clear half the width of the but- that are better than my originals because
terfly to be suspended at the higher level. If the carver has more skill or took more
monofilament nylon is used for suspen- pains. I have also seen copies that are so
sion, it is advisable to double-knot and glue painstaking that they have somehow lost
when balance is achieved; nylon will loosen verve and fire. Making a given design over
and slip if you don't. and over should obviously lead to improve-
were made
All parts for these butterflies ment, but sometimes it leads only to
by hand, but wings can be band- or jig- change because the individual is not capa-
sawed, of course, and Vs-in (3-mm) wing ble of further improvement or becomes
thickness obtained by planing or sanding. bored with the repetition.
The best tool for shaping holes and veining To illustrate facets of this question, I have
I found to be a knife with hook blade. It is selected two groups of designs (Figs. 224
stiff enough to work any wood and is read- and 225), one with Indian variations on a
ily interchangeable with a standard blade bird profile, the other showing variations in
for normal knife cutting. the design of an American eagle for the top
If be used singly, you
butterflies are to or splat of a wooden clock-case.
may want add
These can simply be
to legs. The and don't
bird designs are symbolic,
copper wire put through straight holes in to my knowledge attempt to depict any par-
the thorax. If the butterfly is to stand, glue ticular species. They are shown in a 1916
the legs in position and splay them out to book, Evolution of the Bird in Decorative Art,
support it. If it is to hang on a curtain or by Kenneth M. Chapman; all are suitable
drape, sharpen the two forward leg tips so for incising, inlaying, or similar applica-
they will penetrate the material, and bend tions. They show how can far stvlizing
them into tiny hooks. You will find that stray from the near-exact reproduction of
many variations are possible in wing posi- the decoy-carver.
tion and angle of suspension, as well as in The second group of sketches depicts re-

120 CARVING ANIMALS

search by Sheldon Hoch of White Plains. tographs of the originals. These were
New York. He has carved mahogany copies shown in the Bulletin of the National Asso-
of these eagles from his own or others' pho- ciation of Watch & Clock Collectors (Feb.,
'81, pp. 20-9) in which Mr. Hoch explained
his project of "Hunting for Birds and Beasts
in Connecticut Shelf Clocks." They are all
from the American Empire period, running
through Andrew Jackson's presidency
(1829-37). Most clocks of that period had
wooden Terry-type movements and hand-
carved cases with splats depicting eagles,
acanthus leaves, pineapples, paws and var-
ied birds and beasts. Such clocks were
turned out by the hundreds by a number of
makers using duplicating machinery for the
works, and sold for about $8. You can imag-
ine how much the carver got for a splat; it

behooved him and work fast.

to cut corners
None ever took time to sign his name.
First designs of this period were appar-
ently baskets of fruit and horns of plenty
(cornucopias), which were on short-case
clocks. Eagles came later, usually on long-
case clocks, and were more prevalent on
eight-day wood-movement and 30-hour
long-pendulum clocks. Each maker had his
own design, almost a trademark, probably
made by one or two carvers. One or two

"17

Fig. 224. American Indian bird profiles.

MAKING A DESIGN YOUR OWN 121

 b&l Bartholomew JO'lv ior\q-p«ndulum

Chauncey k«s 30-Kr lonq cas« Raze

^. Marsh-Gilbert frddy.

(vUy Wkifrnq Mofe differences

Cly Terry & Son 8"d ay. 55 lerry^

Vniutsal tajlc- many 3<9 -fir clocks

Silas Hoadley 5D-h. Note shield

PuWcr\ Barley - One. of a kind ?

Hopkins & Alfred Rare Fig. 225. American eagles.

makers had more than one design, and There are relatively few left-facing eagles.
some occasionally had unique ones. As (I seem to recall that left-facing was thought
wood-movement clocks lost out to brass- to be unpatriotic by some purists.) Right-
movement ones, some makers went to in- facing ones are essentially alike, suggesting
creasingly unique, often one-of-a-kind cas- a common ancestor or source design. In
ings with splats to match, featuring coats of fact, some of the carving conventions, for
arms, stylized birds and beasts or what- feathers to name one, are repeated. Some
have-you (sometimes to order). designs have crests, others do not.

122 CARVING ANIMALS

 NEWEL- POST CAPS (On sections of re-cycled c<?dar utility poles)

x BEAM ENDS

Mountain Goat

Fig. 227. These unusual and powerful woodcarvings include panels in pioneer and Indian motifs, newel
posts (recycled cedar utility poles) with animal-motif caps and beam-ends with animal heads. These are
true folk art, made by tyros of Timberline Lodge, Mt. Hood, Oregon. All motifs are readily adaptable to
smaller carvings. Such work calls for bold and deep cutting, with very limited detail.

MAKING A DESIGN YOUR OWN 123

Fig. 228.The tail and hockey stick on this beaver award plaque are inserted in holes in the body, which in
turn is mounted on brass skates set into the 6 x 12-in (15 x 30-cm) base. Body is not in the round, but
flattened on the sides to reduce bulk and fit available wood. Lower body is textured and tail cross-hatched.
Stocking cap pompon, edge of cap and pullover sweater are tinted with oils.

How to suit a client's needs tion was a silhouette panel of the "business
Mention has been made of the infinite vari- end" or head of a hockey stick (Fig. 229A),
ety of designs that can be based upon a —
about actual size 7 in (18 cm) wide. Upon
particular animal or bird. Here's a case in it was carved a beaver and the suggestion of

point. Ithas to do with an unlikely ani- a dam, as well as the name of the man and
mal — the beaver. My experience with it de- the season. It was in /4-in (19-mm) ma-
3

rives from the fact that a particular client hogany, natural finish, and was made so it
has sons who are members of a hockey club could be a wall plaque, or a stand-up or lie-
having the unusual name of Beaver Dam. flat desk ornament.

She has had need at one time or another for The next request was for Christmas tree
Christmas tree decorations, pendants and decorations. I made a number, including a
awards with some tie-in to the group. On series of miniature skates of various eras,
occasion, she has given me carte blanche to miniature shoe skates and typical skaters;
provide what is necessary. Here are some of but of most interest here were a hockey
my designs, which may suggest ideas if you goalie (C), a player (D), and two other
have a similar need. Many other designs beavers. These were 3 or 4 in (7 or 10 cm)
and func-
are possible, of course, their form tall, the teak beavers textured with a veiner
tion depending upon the animal and the and finished in natural color, the hockey
need. players tinted to suggest the colors of the
The beaver is not a particularly pre- club.
possessing animal, but he is appealing in A further request, a year later but also for
thathe goes his own way and lives a some- short-term delivery, was for a somewhat
what distinctive life. He is also rather easy more ornate award, this time for a single
to caricature because of his distinctive tail volunteer coach who had led the team to
and bulky shape. the championship and also conducted
The first request I had was for awards for them on an 8-day, hockey-playing visit to
two volunteer hockey coaches and they — Finland. The championship was to be men-
had to be produced in 24 hours! My solu- tioned prominently, the Finnish visit some-

124 CARVING ANIMALS

 Award pUque for a tiock«y coack

of +hc Beavers." Makooary

Low- relief, ant r^uad

i

R.D. SMITH
1976-77 /%"*

Stick inserted
h w»«J

^ HOCKEY MOTHERj
PENDANT BEAVER GOALIE

Tail,skates & stick,

separate
Backs & \eqs of bea^es arc v«ir\«.f-"texfured

BEAVER HOCKEY PLAYER SHY BEAVER (CdncaWr)

Fig. 229.

what less so, because some members of the beaver was carved with cap and turtleneck
team had been unable to make the trip. My sweater. On one upper arm was a miniature
solution was a larger beaver in mahogany, Finnish flag. Flag and cap were lightly
mounted on brass skates of the latest tinted with oils in appropriate colors. On
hockey style, on a Mexican mahogany the base was incised the single word
base. Base dimensions were 6 x 12 in (15 x "Champions" and the date. The base edge
30 cm), and the beaver was about 10 in (25 was carved with a random pattern suggest-
cm) tall, with separate tail inserted. The ing the logs of a dam.

CARVING ANIMALS 125

 Why Not Carve Flowers?
The answer to that question is that, president, and carvers in Bali, Japan,
sooner or later, everybody does. Foliage China, Africa and other faraway places still
and fanciful figures —especially gods and incorporate foliage, gods and heroes, as
heroes —were popular subjects for ancient well as fanciful creatures into their work.
carvers.The Egyptians, for example, were One reason is that foliage, with fabulous
partial tothe lotus and creatures—
to like figures interspersed, is an interesting and
the Sphinx — that combined the attributes of infinitely variable way of decorating a sur-
various species; the Greeks favored the face or tying together elements of an in-the-
acanthus and their gods; Europeans carved round composition, or even for providing
the oak, the grape, folk heroes like William such utilitarian service as supporting other-
Tell or Charlemagne, the griffin, and the wise fragile parts of a figure. Another rea-
dragon; China and Japan carved unicorns, son is that foliage and fable are part of the
dragons, vines, and water lilies; the Nor- basic fabric of our past; both are pastoral
semen doted on strange animals and gods; and rural in feeling, rather than sophisti-
the Germans and Dutch were masters of cated and urban.
high-relief forest scenes. In this section, I have tried to assemble
The situation hasn't changed much. examples of a wide variety of floral and
American carvers try Paul Bunyan, Babe fabulous subjects, while consciously avoid-
Ruth, Abraham Lincoln, or the current ing the trite and familiar examples available

FLOV/trw "Trick" or\z-piac<z "techniques-

rVi-dnllctr .

Soak & Shaw d

split to petals-U
for fine
thin carls
';v
blade
._ pcfels *'* r
f°
(
motion flat ones

Petal
r while tn«y dry
shape & numbar, & '
For "mu.nr\i -
shave up 8 down
ar\q I* forward or backward
h> make thin carls
Suited to tht species

On<z-pi«CG fan fyp* ^ Solid Type

Fig. 230. Simple flowers made from single pieces of wood. These require wood that can be split or shaved.

126 WHY NOT CARVE FLOWERS?

 Violet Daisy Chrysanthemum Tulip

Fig. 231

elsewhere. They offer fascinating pos- cessity, entirely imaginary. For typical de-
sibilities, among them the pragmatic one signs I have provided step-by-step pho-
that exact portraiture —either of foliage or of tographs, with hints for the solution of
mythical heroes — is not required because knotty problems. For most, there are front
we don't observe foliage that closely, and and side patterns; suggestions for your
authentic portraits of the ancient gods and own designs, for finishing, for wood, tool
heroes do not exist. Even a tyro can achieve selection, and for size, are all included as
creditable results. well.The tedious research has been done,
Many of the pieces shown here are my leaving theway open for pleasant, fascinat-
own originals, sometimes adapted from ing and rewarding carving.
traditional sources, and sometimes, of ne-

... low-nzlief 6 \n-tke-round formal Various woodj

Kan dart or
pin badcs
Forqet-m«-nof 6 cowjW
5traridad cappxe

*,>«twjst«d«
Can be reversed*
' iuspendod rrom sTam-
Wood
Daisy
Composite (W metal Two Dc si'qns -% me blank
Fig. 232.Pendants carved from colorful hardwoods. The lily is in vermilion, the other two from the same
blank of purpleheart.

FLOWERS 127
 —

As would be expected, we have mecha-

Special tools?
nized woodcarving as far as possible. Cir-
Floral and foliage elements tradi-
cular saws and band saws help shape
have been the basis of much formal
tionally
blanks; routers cutaway backgrounds; cop-
woodcarving design. Because foliage has so
ing saws, power drills and sanders are also
many concave and similarly formed sur-
used. Carvers of totem poles and wooden
faces, specialized woodcarving tools were
Indians and other heroic figures have
developed long ago. Simple flowers and
fruits can be shaped in the round or in high
—
adopted the chain saw with a great gain in
speed of cutting but a great potential for
relief with the knife alone, of course, but
making the user deaf and driving his or her
such forms as oak, grape and acanthus
neighbors insane. Carvers of small objects
leaves, bunches of grapes, vines, and com-
and/or very hard materials use hand grind-
plex flowers take shape much faster with
ers or flexible-shaft machines with shaped
chisels.
cutters, and claim extraordinary results
For most work, a blade length of IV2 in (4
with them. Some have even adopted dental
cm) or less is advisable; longer blades tend
to bend, catch near the heel, and are diffi-
drills. My experience is that they are hard to
control,chew rather than cut the wood, and
cult to control when you cut with the tip.
throw dust and chips over a considerable
The wider the blade, the straighter and
area, so the user needs safety glasses. I
more stable your cuts, but the greater the
have even met a few carvers who use pneu-
difficulty in cutting concave areas and in
matic or electric hammers with fitted chis-
tight places. If you are delighted by heavy
els. Like the profiler and duplicator, such
chips and big cuts, you'll break the narrow
equipment is primarily commercial. It may
blades. I should warn you that you should
save time and effort in some instances, but
cut out chips, not try to wedge them out
hand finishing is usually required anyway
that's likely to break both wood and knife.
if the surfaces are to have any quality.
It is, of course, possible to make your
You don't need nearly as many tools as
own special knives as many whittlers do.
you or a tool salesman may think.
They're usually special-purpose to get into
particular spots and for the repetitive carv-
ing of a particular shape. Such knives are Simple flowers
made from slivers of safety-razor blades Grinling Gibbons, the Englishman, was
bound into dowel handles, reground noted for his swags of flowers and leaves in
straight razors, or other pieces of good and high relief, and many a carver before his
tempered steel. The principal cautions here time and since has used flower motifs, par-
are to grind very slowly to avoid burning ticularly the rose and the acanthus leaf.

the cutting edge, and to bind the blade Most of these were used in essentially for-
securely into the handle. A blade that wob- mal carving, and usually were carved in
bles or tends to snap closed is likely to cut rather high relief. However, many whittlers
you wood.
rather than the have also made flowers, some of them as
A Band-Aid® or tape on the middle joint one-piece "tricks" — variations of the puff of
of your index finger will be helpful; it pre- curled shavings or the fan. In recent years,
vents blisters if you haven't built up a callus the flower produced by multiple shavings
there. When you whittle, you must keep has been particularly popular as a demon-
your mind on what you're doing; you can't stration and low-priced commodity at
watch TV or converse. Many whittlers have woodcarving shows.
remarked that they only cut themselves To make a curled-petal flower, the only
when demonstrating or teaching, because requirements are wood that shaves well
they talk when they should be intent on with the grain (like white pine or
carving. Learn to be careful with the knife. basswood), a sharp knife, and a good eye.

128 WHY NOT CARVE FLOWERS?

 Figs. 233, 234. Exercise #1, "the eternal knot," requires cutting across grain and top
rounding. (See pages 131,132.)

You may prefer soak the wood in ad-

to several longerand heavier chips along the
vance, so that the shaving will not split stem to suggest leaves. The flower can be
ahead of the knife. All you do is whittle the colored by spraying or dipping it in dye or
stick roughly circular, then make thin shav- vegetable coloring.
ings around and around you have
it until Flowers can also be made by sawing or
the desired number of petals. The individ- cutting a cross-grained blank in soft wood,
ual petal normally should be started on the particularly white pine, and whittling a pe-
side rather than the end of the stick so that tal shape both sides of center, then soaking
the petal end is round, and the cuts should the blank and splitting out a series of thin
be ended at a fixed point set by the first row petals (as shown in Figs. 230-232). The pe-
cut around. tals can be spread and held in a regular fan
Such a flower can be carved double, or pattern, or, with a little more difficulty, al-
"mum" shape, by running shavings from ternated in direction. If they are held in
both directions, but you must take care that position until the wood dries, they will stay
the cuts from above and below are kept Vt in that way, or they can be held more securely
(6.4 mm) or so apart so petals are not split by interlacing them with a colored thread
off. It is also possible to carve miniature near the outer edge.
Christmas trees in this fashion by making a If the blank is for a flower like a daisy,

series of collars of shavings, each one with which has the bloom at right angles to the
progressively shorter shavings. (That's the stem, the stem itself must be carved across
way we Boy Scouts made "fuzz sticks"
also grain or added later, either ofwhich is a
to act as core tinder when we started a fire.) nuisance. However, if the flower is formed
Once formed, it can be
the flower is parallel to the main stem, as in the violet
trimmed to a special shape with scissors, if (Fig. 231), the stem itself can easily be
desired; then the core on the top is cut off carved later. Again, the petals can be
and the stub shaped into a dome like a shaped by knife or scissors and the flower
daisy eye, and the bottom is thinned into a head tinted as desired.
fairly thick stem. It is also possible to cut Flowers like the tulip can be carved from

SIMPLE FLOWERS 129

 Figs. 235, 236. Exercise #2, a diaper pattern, allows for individual variation.

the solid blank by drilling a core hole in the Somewhat more elaborate and difficult is
end of a stick (of any wood) so that the flat the carving of flowers for pendants and
sides are fairly thin, then sawing down in pulls. These can be in the round, of course,
the middle of the flat sides almost to the or they can be in low relief like those shown
base of the core hole. Each corner can then (Fig. 232) —
either single flowers or groups
be whittled into a petal with a projecting depending upon the shape desired. I've
point (Fig. 230), and the leaves and stem usually made such flowers in brilliantly col-
carved below the bulbous head. ored woods like vermilion, purpleheart, or

Figs. 237, 238. Exercise #3, a stylized tulip, requires a more careful cutting of lines.

130 WHY NOT CARVE FLOWERS?

 £xgrcisg*4~ Costing
(ThisporTion may t« botfcd, HiuS
climinatina ctrcli)

Figs. 239, 240. Exercise #4, a floral pattern, requires bosting or grounding out.

in a white wood like holly. Flowers are chal-

lenging enough so that they deserve a good
How to start carving with flowers
H. M. (Mack) Sutter, of Portland, Ore-
wood, although they can be made in softer
gon, has taught panel carving as well as
woods if they are to be painted. It's fun to
whittling for more than 40 years, and has
suit the pattern to the available scrap, as I
developed what is proving to be a highly
did in the case of the purpleheart carvings
successful and rapid method of learning.
(Fig. 232); the blank was over Vi in (12.7 mm)
The first lesson, surprisingly, is not par-
thick, so I could really make two different
ticularly easy; it requires a great many dif-
pendants from the same basic blank.

Figs. 241, 242. Exercise #5, a stylized lily, incorporates more intricate detail.

SIMPLE FLOWERS 131

 Figs. 243, 244. Exercise #6, the dogwood, involves texturing and long, fragile stems.

ferent types of cuts. It is called the Eternal the way I learned —except that I had no
Knot, and the student must work in all di- book for reference until several years later.
rections, so that he or she learns about grain The virtue of this method is that the indi-
immediately. vidual is immediately challenged and never
His designs are carved in basswood bored by repetition and tedious detail.
/4 x 7 x 8V2 inches (1.9 x 17.5 x 21 cm) with a
3
The second panel is the ancient diaper or
beginner's set of short chisels and no mallet. allover pattern, for which Mr. Sutter pro-
Tools include a firmer, a V-tool, and 3 or 4 vides only a basic outline. Each individual
small gauges plus a knife. can work out his or her own detail design;
It is quite possible for a deft beginner to Mack says that no students have ever made
teach himself by this method; it is actually exactly the same design. These designs are

Figs. 245, 246. Exercise #7 is a flower group combining previous problems and veining.

132 WHY NOT CARVE FLOWERS?

 V^ A'uiqn '
) 'v^ — < 'iiium
1

Figs. 247, 248. Exercise #8 is a traditional pattern of the kind used for door panels.

large and open, so they are basically not Mack figures that the basic course should
difficult to carve in soft wood and can be consist of about ten 2-hour lessons. How-
done with hand pressure alone. Also, the ever, when a student has tools he can con-
opportunity to vary the design in the sec- tinue carving between lessons, of course,
ond project provides the individual with so more material is required. Thus Exercise
the opportunity to adjust the intricacy to No. 3, the tulip pattern, is expected to be
his own natural ability; he can make some- completed as well. (Figs. 236 and 238 are
thing as simple as mounded diamonds or as adapted from designs in "The Book of
complex as the pattern in Fig. 250. Neither Wood Carving," by Charles Marshall
design requires the setting-in or back- Sayers, recently reprinted by Dover Pub-
grounding that takes added competence, lications, Inc., New York. Exercise No. 8 is
yet either can be shown with pride when adapted from Sayers' Design No. 8. They
completed. are reproduced here by special permis-
sion.)

Two artifical roses on a store-bought birthday cake inspired me to copy them on a panel (Fig. 250,
Fig. 249 (left).
appropriately, of rosewood, about 1 x 6 x 12 in (2.5 x 15 x 30 cm). Elements were drawn on it, then
right). It is,
the background was routed Vi in (12.7 mm) deep and the units were modelled. Background was scalloped with a
flat gouge.

CARVING FLOWERS 133

 Figs. 251, 253. The dogwood pattern used
on this salad bowl and the napkin rings
were copied from the actual flower and
dogwood. The pieces are in
leaf of the
myrtle,which has strong color variations.
The bowl was finished with a gloss
varnish outside, vegetable oil inside; the
rings were gloss-varnished.

DOGWOOD MOTIF on d saw bowi

The intermediate series of lessons begins Advanced classes usually undertake in-
with Exercise No. 4, the flower group, and dividual projects that require specific ad-
this is the only required panel, because to vice and instruction, or may broaden out
learn setting-in and bosting, or grounding into general carving.
(cutting away the background), takes some
time. However, those who complete No. 4 Variety in florals
may go on to projects of their own or select Flowers and foliage are a traditional part
from No. 5 the lily, No. 6 the dogwood, No. of, or decoration on, many other works:

7 a circular flower group, and No. 8 a reg- plaques, coats of arms, doors, frames,
ular design involving precise curves. nameplates, boxes, bowls, vases, even han-
Again, the middle of No. 8 can be any of dles, chairs and seats. They have been
many patterns. carved as decorations on robes, dresses and

Fig. 254. T. E.
Haag, of Tualatin,
Oregon, carved
this grape design
into a cherry-wood
shelf.

134 WHY NOT CARVE FLOWERS?

Fig. 255. Decorative plaques often incorporate
do coats of arms). This walnut plate was
foliage (as
made by Gunther Goetz, of Denton, Texas.

hats of 3D figures. All this is undoubtedly

because foliage is so adaptable to space re-
quirements and can be made into a non-
obtrusive background. It can also convey a
concept, such as the oak leaf or acorn for
strength, wheat or corn for life, the lily or
rose for many religious concepts. Flowers
and foliage also have been stylized, as in
the Tudor or Luther rose, the acanthus, and
the papyrus. Vines have been combined
with other motifs to produce openwork
screens for all sorts of purposes.
Because they tend to be fragile when
carved, flowers and foliage are usually
carved in than in the round. In
relief rather
recent years, much
it has been done in
of
low relief to avoid problems of undercut-
ting and fragility, because foliage is often an
integral part of the decoration of utilitarian
objects. It is particularly adaptable to filling
and closing a circle or other geometric
shape, without elaborate and mathematical
pre-layout. Thus a design can be carved on
the circumference of a bowl, plate, and
gourd, with no worry about whether or not
the design will "meet itself coming back";
an extra leaf or twist in a stem or vine will
compensate. Further, the usual design can
itself be expanded or contracted slightly as

you go by making flowers a bit wider or

narrower, adding leaves and the like. A
geometric or other exact pattern will be dif-
ficult to accommodate to the changing cur-

vatures of a bowl or vase, but a floral design

can simply be pulled in or expanded a little
to compensate for changing contours. In
fact, the possibilities and variations are so
great that I shall try to cover the ground by
illustrated examples rather than verbal de-
scription.

Floral polyglot panels

Some years ago, I carved a number of
Fig. 256. Polyglot panel of English sycamore depicts
polyglot panels in teak, grouping animals 62 flowers and five birds selected for familiarity
in one, birds in another, "bugs" in still an- and distinctive silhouette (see Fig. 257).

VARIETY IN FLORALS 135

 Identification:
Flower and Bird Panel
34 Wild rose
1. Blue vervain 35. Ladv-slipper
2. Wild sunflower (vellow)
3. Columbine, or 36 Forget-me-not
4-o'clock 37 Thistle
4 Frangipani 38 Nightshade
5 Oueen Anne's lace 39. Water arum
6. Jack-in-the-Pulpit 40 Bluebell
7. Oxeye Dai-\ 41 Fringed gentian
8. Heliconia 42. Bottle gentian
9. Purple coneflower 43. Buttercup
10. Common plantain 44 Rose mallow
11. Trumpet creeper 45 Anthurium
12. Shooting star, or 46. Coral trumpet
American cowslip (floweret)
13. Jewelweed 4" Whiteviolet
14. Morning glory 48. Bluet or innocence
1? Tulip 49. Bird-of-paradise
16 Day lily 50 Marsh marigold
17 Purple virgin's- 51 Pitcher plant
bower (clematis) 52. Hibiscus
18. Evening primrose 53 Daffodil
19 Dandebon 54. Indian pipe
20. Dayflower 55. Plantain (water
21. Lousewort reed)
22. Oswego tea, or bee 56. Water lily
balm 57. Indian pink
23. American lotus (a 58. Wild ginger
water lily) 59. Cow or yellow
24 Black-eved susan pond-lily
25. Angels-trumpet 60. Wild geranium
(small tree) 61. Cattail
26 Lil\ -of-the-valley 62. Moss pink
27 Wood anemone Birds
28. Atamasco lilv A. Ruby-throated
2m Iris hummingbird
30 Painted tnllmm B. House wren
31 Flowering dogwood C. Cardinal
32. Skunk cabbage D. Robin
33. Clover E Saw- whet owl

Fig. 257. Polyglot panel of English sycamore is 1 x 10Vi x l7Vi (2.5 x

27 x 44 cm).

136 WHY NOT CARVE FLOWERS?

 .

other, and so on. These all evolved from my "Golden Mean" calls for a width 60 percent
so-called "bug tree," which was a polyglot of height), which, with a reasonable self-
group of insects, worms and spiders carved border all around, left a 9 x 16-in (23 x 40-
in heroic size on the 12-ft (3.6-m) trunk of an cm) working area. The panel thickness was
apple tree they had conspired to kill. Units 1 in (2.5 cm). I decided on a background

were placed where they fitted and as whim depth of only 54 in (3.2 mm), with limited
dictated, without regard to relative scale or modelling of elements. Birds and flowers
viewing aspect. This stele, or column, was drawn from field guides were laid out di-
in reality a carved panel wrapped around a rectly on the wood. I tried to select birds
tree. and flowers that are familiar and have dis-
This panel (Fig. 257) is a lineal descen- tinctive silhouettes, and I altered scale to
dant —a commission for one panel featur- make the subject fit and
the space. Layout
ing flowers and birds. I had available a carving were done simultaneously from
plank 12 in (30 cm) wide, of English syc- one corner. Slight overlaps are advisable to
amore (harewood) which is very white and avoid gaps and the stringy look of straight
dense, with a crossfire figure in fiddle pat- stems, of course, and care must be taken
tern, enough to give the wood interest not to "carve oneself into a corner." As my
without being obtrusive. It is amenable to panel worked out, it included 62 flowers
both chisel and knife, does not split or and five birds
crumble, and will support a great deal of Because the carving was relatively shal-
detail. (It is customarily a veneer, used as an low and the wood so white, I darkened the
alternate to American holly, and as the cli- background with a light-tan, German, sal-
ent was English, the wood was a happy ammoniac stain to make the elements stand
choice.) out. This was preceded by a spray coat of
Panel width was about 10Vi in (26 cm), so I matte varnish to avoid overabsorption of
selected a length of 1756 in (44 cm the — stain in cross-grain areas. The carved sur-

Fig. 258. Fig. 259.

FLORAL POLYGLOT PANELS 137

 Fig. 260. Fig. 261.

face was also coated with the same stain, cial verses written by the client about the
but in small areas at a time, so the stain treeand the growing child, so it had to be
could be wiped off again at once, leaving personal and whimsical in feeling.
high spots almost white, with darker lines. Obviously, it was impractical to depict
You probably won't want to make an ex- every needle, or even every little branch.
actly similar panel. The designs are flexible, As in making a portrait of a person, it was
so you can make another arrangement or advisable to idealize, not caricature, the
use them individually. subject a little. Thus
was helpful to fill out
it

a few scrawny branches and to remove in-

Portrait of a pine terferences around the tree or in the back-
Trees, clouds and splashing water can ground, as well as to picture it from the side
be the nemesis of a woodcarver because all that is usually seen. It was also essential to
have feathery, ill-defined edges, and a carv- retain the identifiable shape of the trunk
ing tends to make them look rigid and and larger branches as well as major ele-
blocky. Therefore, it was with some trep- ments of the surrounding terrain. Yet one
idation that I undertook this panel portrait can justifiably add a little animal life or
of a particular pine tree. It was planted al- slightly move a bush or the like in the inter-
most 40 years ago by the client's son, and est of a better composition — that's "artistic
both have since grown taller and older, al- license."
though the pine had suffered from the I began by taking photographs
a series of
breaking of an upper fork that had stripped of the tree to get the overall shape and the
branches down one side; hence it was effect of perspective on the eye of the
somewhat misshapen. The finished panel viewer from the usual viewing point as well
was to be accompanied by some very spe- as from others. These turned out to be less

138 WHY NOT CARVE FLOWERS?

helpful than I had anticipated, because a the tree. Setting-inmust be done carefully
picture taken against the sky even on a— to avoid breaking of narrow cross-grain sec-
snowy and dark day loses con-
relatively — tions. One way reduce this likelihood is
to
siderable detail because of the contrast. I to set in the second side of a narrow section
could, however, determine general shape by driving in the chisel at an angle away
and composition and lay the tree out on a 2 from the opposite side, then later correct-
x 12 x 19-in (5 x 30 x 47.5-cm) Oregon- ing the cut to vertical. Also, depth must be
pine panel, then go to the site and sketch in severely limited in such cuts, at least ini-
added detail. I made no preliminary sketch tially. (As you get deeper, the danger of

because there was no need for that kind of a breakout is reduced.) I selected a ground
record or guide, and I used pine because it depth of Vi in (12.7 mm) as most practical.
was relatively soft and because it was the For setting in, I lined in with a veiner, and
same material as the subject. The step-by- set in with a Vi-in (6.3-mm) firmer, Vi6-in
step pictures tell the rest of the story (Figs. (1.6-mm) flat gouge (No. 3), Vi-in (6.3-mm)
258-261). medium gouge (No. 5), plus knife and hook
Of the seven pictures taken, one photo knife. Grounding required the same tools,
was helpful to attain general shape, includ- plus a %-in (9.6-mm) deep gouge (No. 7).
ing the masses of needles and the slight
curve of the trunk as well as the disfigure-
(Fig. Grounding could be left quite
260)
ment where the fork had broken years ago.
rough and cleaned up as modelling pro-
However, the needle masses obscured the
ceeded. To suggest the needle structure, I
actual branch positions. The brush around
used parallel cuts with the veiner, or vees
the tree base and a neighbor's shed beyond
with the knife, depending upon the size of
the fence, as well as the trees in the back-
the area. Each branch was first modelled to
ground, were out of the final composi-
left
a general shape, and the branch itself sug-
tion primarily confusing factors, al-
as
gested by cutting a vee on each side of it,
though the fence and an adjacent bush and
usually with the knife to avoid breakouts. A
small hemlock were included. (Fig. 261)
V-tool might have been used, but it would
have caused trouble because of narrow sec-
(Fig. 258)The tree was drawn directly on
tions and cross-grain cuts. Even the veiner
the block by the point-to-point method.
caused some trouble, although it was razor-
Fortunately, the carving was to be exactly
sharp. As carving progressed, I modified
three times the size of the key photo, so
the original sketch here and there to sug-
transfer ofdimensions was relatively easy,
gest branches on the face that had been
although detailed. Some branches could be
stripped. Also note that the branches are
placed by eye, others modified slightly in
quite visible at the top of the tree but are
the interest of better composition. It is also
obscured lower downbecause of the point
important to remember that extremely
of view of an observer. Needles are not con-
small openings between branches and else-
tinuous lines in one direction; they vary
where should be avoided when possible
across a branch to suggest multiplicity. The
because of the difficulty in carving them.
lines are also carried down the set-in sides
The fence is cross-grain and difficult, but
to the ground, to break the solid look of the
unavoidable. The sketch was modified by
edge as much as possible.
direct observation of the tree, then blocking
outlines were inked in.
(Fig. 261) A bird to scale on a tree of this size
and grounding-out are
(Fig. 259) Setting-in would be almost invisible, and a bird flying
extremely tedious and painstaking in this in the sky would be both a nuisance and
case, but essential to retain the character of somewhat trite, so I carved a slightly over-

PORTRAIT OF A PINE 139

sized bird alighting on an upper left-hand also elected to leave tool marks on the back-
branch. As carving progressed, I also ground in a somewhat haphazard pattern,
added a squirrel sitting on the fence and a although they were principally vertical to
raccoon peering around the base, although reduce tearing of edges. These were cut
the raccoon is essentially a night animal, at with the deep gouge as far as possible,
least in my suburban area. Light sanding was done in some areas, par-
As carving was completed, was neces-
it ticularly on branches and on rough por-
sary to reduce the prominence of some tions of the background. Then the entire
branches and leaf structures, and to em- panel was given two coats of spray matte
phasize others, as well as to clean up the varnish, "antiqued" with teak stain, and
ground after set-in sides were textured. I waxed.

140 WHY NOT CARVE FLOWERS?

 10

Carving Fabulous Creatures

The unicorn for ladies created the legend. Gradually, a complete

The unicorn has always been popular, myth was built up about the animal and the
especially with females, probably because horn, and it became a popular medieval
of thewell-known legend which claims that symbol. The story grew that the horn came
when it meets a virgin, it will put its head in from a creature described as essentially a
her lap and become tame and powerless. It horse with antelope legs and cloven
has also become associated with power, pu- hooves, a tail like a lion, and a goatee, plus a
rity, spiritual force and divine creativity. It very luxuriant mane. The horn was of var-
is depicted in the famous French tapestry, ied length, but twisted upon itself (as is that
the Virgin and the Unicorn, as well as in and was considered to have
of the narwhal),
others. magical powers in medicine and aphro-
The unicorn (or monoceros) is an excellent disiacs. Royal jewelry, sceptres, even
example of how mythsare born. The an- thrones, were fashioned from it, and pieces
had the boats and the
cestors of the Vikings were ground into a very marketable
nerve to hunt in northern waters far from powder to be added to potions.
land, and they encountered narwhal The unicorn was depicted in various
herds. They carried the tusks home, and works of art, including tapestries, and was
some tusks found their way into central incorporated in the British royal coat of
Europe through trade. But the Norsemen arms. Popular playing cards depicted a
either didn't tell the origin of the tusks, or wild man, or hairy man of the forest, riding

Fig. 262.

CARVING FABULOUS CREATURES 141

 Fig. 263.

Fig. 264.

a unicorn, thus combining two legends. cultures. A unicorn-like animal, more

The myth was brought to America and car- leonine but with a single horn and its ruff
ried over into our folk art and tales as late as forming an aureole around its head, occurs
—
the last century and is used in popular in Chinese folklore, notably the Chi-Lin. It
designs even today. was supposed to appear only at the birth of
Like the legend of the biblical flood, uni- a great sage.
corns also appear in the literature of other When I was commissioned to carve a

142 CARVING FABULOUS CREATURES

 Fig. 265.

small unicorn, my client andagreed upon

I back and tail areas, then the rounded-mane
a couchant pose (lying down with the head shape was scroll-sawed. It immediately be-
raised). Preferably, the figure was to be came obvious that the centerline of the
carved in a light-colored wood, with the mane had to be a spiral to meet the back at
head turned back rather than an action pose the foreshoulders, and that the animal had
(see Fig. 262). I selected Port Orford cedar, to lie on its far side if the forelegs were to be
partly because I had a block of it that mea- side by side. If the body was to be relatively
sured 3Vi x 6 x 10% in (9 x 15 x 26.5 cm) vertical, the forequarters had to be twisted
and was relatively free of visible knots. I forward, or the legs—at least the right fore-
planned on a separate and contrasting horn leg —
had to extend towards the front rather
and a luxuriant mane. The front legs would than being brought to the left.
be side by side, and the animal would ap-
pear to be resting on a ledge. This would (Fig. 264) It seemed advisable to shape the
permit a base that could be clamped during head first and to resolve the body pose
carving. So much for sketches and plan- thereafter, because the nose had to be at the
ning! As it turned out, the block tapered front of the block to allow sufficient depth
from 3% in (9.5 cm) to 2> h in (9 cm), from
x
for the rest of the figure. Therefore, the
one end to the other, and was short of the head was rough-formed with a %-in (19-
height needed for the head. mm) flat gouge, the neck curve worked out,
and the front line of the shoulders estab-
—
Carving the unicorn step by step lished. The head was sawed to approximate
(Fig. 263) The sketch was transferred to the thickness and taper, so ear positions could
block and the block was rough-sawed to be established as well. It turned out that a
silhouette. The slab that was cut away from knot ran exactly through the center of the
the back was glued at the head to increase goatee, so this was left attached to the body
the height there to 7% in (19 cm). Wood was wood of the shoulder as long as possible to
chiselled away behind the head and the support it.

THE UNICORN 143

 Fig. 266.

(Fig. 265) About this time,it became appar- tucked under the chest, would of necessity
ent that the head pose was complex, so it not cross as far as I had originally drawn it.
was worked out in detail, including the The new position was easy to estimate by
mane, neck garland, throat, and ear and using the dimensions of the visible left fore-
horn locations. Reference to horse pho- leg as a guide.
tographs gave head details but no example
of a head turned back. I remembered two
sets of Chinese horses I had, each with one
horse with its head reversed. Neither
turrted out to be particularly helpful, be-
cause the Chinese had simply swivelled the
head 180°, and in the case of the ivory head,
the carver had depicted the mane running
straight down so it ended between the fore-
legs! Also, wanted to avoid a prosaic, flat
I

base, and suggest instead a sylvan ledge.

to
I had already tilted the sketch on the block

to make the base thicker at the front of the

animal.

(Fig. 266) A reasonable spiral for the cen-

terline of the mane was drawn, and a tech-
nique for the —
mane worked out primarily
large curls at both sides of the centerline
and in an irregular pattern. Also, the body
was to lie vertical, with the right fore-
shoulder somewhat advanced, as it would
be naturally, and the right leg, even though Fig. 267.

144 CARVING FABULOUS CREATURES

(Figs.267 and 268) Once these decisions
were made, blocking out of the rest of the
figure was relatively easy. The tail was
carved, and the legs defined. The base was
rounded to make the hooves stand out, and
textured with a flat gouge. The neck decora-
tion, instead of being a simulation of a deco-
rated leather collar, was made
to resemble
woven miniature with a heart
flowers,
hanging over the breastbone. For the horn,
an available scrap of walrus tusk was
ground into a spiral shape, then sanded
and scraped to a dull sheen. Fortunately,
the ivory had a slight curve, which helps
the effect. The entire piece was sprayed
with three coats of matte varnish, then the
neck garland and areas of the belly and
under the legs were tinted slightly darker,
and, finally, the whole piece was waxed.

Fig. 268.

Fig. 269. The finished unicorn.

THE UNICORN 145

 Chinese dragon with elaborate tendrils about
Fig. 270.
head, multi-frond tail and tongue, partial scaling on
back and foot tops. This is a good relief pattern.

be with three toes forward and one in back

like a chicken or with four toes forward like
a cat, although in both cases the toes should
be long. The back ridge can be nonexis-
—
tent in which case your dragon may look
more like a dinosaur; it can be a simple sine
curve or a notched ridge (like my winged
dragon in Figs. 273, 274); or it can have a
wave pattern as the long dinosaur's back
ridge does (Fig. 272). Such decisions you

Carving a dragon must make because they are a function of

Dragons, like unicorns, are a perennial what use you plan to make of the beast and
favorite, but can be quite difficult to carve,
how much time and skill you have. I have
depending upon their complexity. The leg- even seen dragons with back ridges consist-
endary dragon, Chinese
particularly the ing of spaced spikes carved from the solid!
(If I undertook that one, I would carve the
variety, has all sorts of excrescences around
the head. It may have wavy tendrils around spikes separately them in
and set drilled

the mouth and/or ears, a spiky backbone holes; they would be stronger and better,

line, hair or whatever on the backs of its

and so would my nerves.)
legs, and some sort of addition to, or multi-
Here are five variations of the dragon
ple forking of its tail. Because dragons are theme, preceding points. A
illustrating the
classical Chinese dragon design is modified
largely imaginary (except for the Komodo
for relief carving on a walnut box top. Note
dragon), you can simplify the design some-
what to make it less fragile to carve, but in the tendrils around the head and the multi-

any case I would suggest a harder wood to ple-forked tail. I also reduced the labor con-

repay the effort involved as well as to pro- siderably by showing scales only along the
vide greater strength in thin sections. If you back. This, too, makes the design less com-
must have tendrils and elaborate poses, I
plex, as is the second (Fig. 271).

would suggest carving your dragon as a

relief panel; the background will then pro-
videsome support for fragile elements both
during and after carving.
It is also possible to vary the backbone
pattern and the foot pattern. Our general
concept of a dragon is a lizardlike animal,
so it would have clawed feet that can either

Fig. 271 (right).Derived from a clay figure in an

ancient Chinese tomb recently opened, this stylized
dragon is very simple in design and a good project for
the whittler or carver with moderate skill or time. The
only detailing is in the head. A good size is 6 x 6 in
(15.2 x 15.2 cm), from a 2-in (5.1-cm) blank. This
carving is by Hugh C. Minton.

146 CARVING FABULOUS CREATURES

Fig. 272. Completed
sinuous elongated
dragon. It makes an
excellent over-door
decoration, and the
texturing gives a
realistic scale effect at
that distance.

Longest of the dragons is a 27-in (68.6- wood —because that what I had. Given
is

cm) snakelike pose in walnut (Fig. 272), thicker wood, the wings could be extended
with undulating body and loop-the-loop more, but would be fragile.
tail. He has no scales, but scales are sug- If I were to make this particular carving

gested by the texturing, which is done by again, I would make the back ridge like that
scalloping the body surface with a flat on the elongated dragon; its slightly greater
gouge. The effect is almost as good as elaboration would go well there. This
scales, and takes less than half the time. dragon, 16 in (40.6 cm) long, took 33V2
The and most elaborate of my drag-
final hours, of which 15 were spent carving
ons is a winged variety (Figs. 273, 274) with scales (including the difficult areas under
looped tail and folded wings so he would fit the body and in the tail loop), as compared
the piece of walnut I had available. I have, with 21 hours spent for the elongated
incidentally, frequently compressed the dragon, of which only 5 hours were scaling.
third dimension of subjects to stay within Whether or not your dragon has scales is
the limitations of commercially available a decision you will have to make based on
wood. The two latter in-the-round drag- the amount of effort you want to put into
ons, for example, are carved in 2 3/4-in (7-cm) the carving. The answer, of course, lies in

Fig. 273. The winged dragon requires a more complex blank. It can be bandsawed, but then must be drilled
and shaped under the belly and the tail and inside the curve of the tail. Some of the complexity could be
avoided by eliminating the integral base. It is walnut, 3 x 5 x 16 in (7.6 x 12.7 x 40.6 cm) long. If thicker
wood were available, the wings could be spread more widely.

DRAGONS 147
 WINGED DRAGON ^p,,,

Three Back-ri

DnU pupils 6. betw««n t«eth

"LONG" DRAGON
HeadiTa,! Only

Aftf r r«ar l«qs

reduce SlUof

Fig. 274.

the areas difficult of access. It would be far require use of a small V-tool to extend the
easier to scale the long dragon despite his ends of each scale until they meet the pre-
double-whirled tail. The winged dragon ceding loops. Once the stop cuts are made,
has an integral base, so it is difficult to reach the scales are shaped individually by shav-
his chest and belly, as well as the inner ing off the inner end of each, so the
curve of his looped tail. The difficulty is, as rounded ends of scales in the preceding
always, that texturing must be done over all row apparently stand above it. I do this
visible areas, and the eye can see where no with a Vfe-in (3.2-mm) firmer so I can work
tool will go. around the loop, except where I cannot
The scale pattern of itself is simple. I reach with it and I must use a knife. The
create the rounded-end scales with half- knife and V-tool may be necessary to rough-
round gouges of three sizes, 3/i6, 5/i6 and % in shape scale outlines in such areas as the
(4.8, 7.9 and 9.5 mm), so scale size can be inner part of the top of the tail loop. (If the
graduated down towards the tail and figure is carved without an integral base,
underbelly and on the upper legs. (Large there is more clearance for tools, but the
fluters, which have a U-shaped cross sec- piece is harder to hold while shaping and
tion, would make longer scales faster, but I there is constant danger of breaking off
have none sufficiently large.) If the gouges legs.)
are set in so the ends of one meet the tops of One problem with making a patterned
the two below it, the gouge itself completes texture, such as scales, is that extra scales
the setting-in, but the scales will be very must be added on the outside of a curve, if
closeand inflexible in pattern, so going the added spacing between rows is exces-
around curves and the like will be compli- sive. This can be done easily by forking the
cated. scale pattern at the sides. This is easier to do
I prefer to make the scales slightly longer, than it is to describe. Another problem is
so the loops of onerow stand away from the presented by the necessity of bringing the
loops of the preceding one. This will often scale pattern up to an edge, such as the

148 CARVING FABULOUS CREATURES

Fig. 275. The winged dragon includes a special knife, Vi-
selection of tools for carving the scaled,
and and 12.7-mm) firmers, gouges ranging from Vi in (19.1 mm) flat to Vi-in fluter and
Vi-in (6.4-
long-bent half-round (to get scale pattern in otherwise inaccessible places) and V-tool. The longer
dragon, because it is not scaled, goes much faster and requires fewer tools.

Fig.276 (left). A comparison of heads and skin textures of the major dragons. Both are in walnut, the
winged one somewhat more detailed in head and body. Fig. 277 (right). Both larger dragons were made
from pieces of walnut plank about 2% in (7 cm) thick, so bandsawing of the blank made sense and saved
time. The only complicated parts of the long dragon are the head and looped tail.

DRAGONS 149
ridged back; every other line of scales will
require a half scale there. This can be han-
dled by using a shorter gouge of the same
radius if one is available, or by simulating
the half curve with a V-tool — which is often
easier and quicker.
The third problem is with grain on such
surfaces as the looped tail; one must be

constantly aware of the grain direction to

avoid splitting off a scale during shaping of
the base. The fourth problem is that any
gouge tends to break out the wood inside
Fig. 278. Spines on the long-dragon backbone are
wavy, produced by drilling spaced small holes
across the ridge and sawing in to them, then cutting
away one side in a long curve.

Fig. 279 (left). The mouth is formed by drilling between the teeth with a tongue visible between.
The tongue could be extended at the front. Fig. 280 (right). The double loop of the tail can be
confusing. I made it as simple as possible by showing the loops parallel on top and making the
entire crossings underneath. The ridge is also carried down onto the tail-tip wedge ultimately.

Fig. 281. A large gouge is the fastest way to clear off excess wood around head and tail, and will
be useful as well in removing the wood on the far side of the upraised left foreleg. Don't forget
the curvature of the tail!

150 CARVING FABULOUS CREATURES

 1

Fig. 282. Sawing is an alternative to gouging away wood around head and tail, and will be useful
as well in removing the wood on the far side of the upraised left foreleg. Once again, don't forget
the curvature of the tail!

Fig. 283. Graduated scaling done with three sizes of gouge covers the body, tail and upper legs. (This took
two days!)Lower legs and toes are covered with cross-hatching rather than scales; it goes quite well with
the more exact design elsewhere. Claws are delineated and long. Difficult areas to scale are the inside of the
tail loop, under the belly and bottom of the tail, and the inside of the raised foreleg; they are visible but
hard to reach with tools. Note that the wings are treated to look leathery, like bat wings.

during setting-in, particularly if the set-in is ward angle (with the handle ahead of the
across grain. The problem is accentuated by cutting edge). This relieves the stress on the
driving in the gouge at a backward angle, or entrapped wood.
even by driving it in straight. It is easier to When scales are cut, there may be tiny
bullnose the gouge-cutting edge slightly splinters here and there. Cut them off as
(so the ends of the arc are slightly behind you go, and clean up the job; they will be
the center), then drive it in at a slight for- hard to find later.

DRAGONS 151
 Fig. 284. Heracles vs.
the Nemean Lion, a
walnut statuette 4x7
x 10 in (11x 18 x 24
cm) tall, including
base.

Assembling a statuette ments, such as the proper contact between

Most complex of the classical statuettes the giant's foot and Odysseus, makes full

I've made, the confrontation between Od- carving of the small figures relatively easy,
ysseus (Ulysses) and Polyphemus, a permits insertion of the soldier's arm in the
Cyclops, illustrates several additional giant'shand so that he appears to be
points in design and carving. It is not one squirming, and the like. In a solid carving,
piece, but an assembly of several. The two all of these decisions must be made in the
small figures are individual carvings (Figs. original design and wood must be allowed
287, 288), asis the spear in the hand of one for them thereafter. Also, sawing and carv-
ofthem. The giant figure is built up as well, ing are complex because of obstructions
the arms giving the necessary shoulder and grain problems. If the carving is com-
width while saving wood thickness by al- missioned, carving in parts saves time and
most half, reducing carving time and cost, —
wood and the client's money. Overall
and making it possible to alter arm position effect is not harmed, and only the careful
in final assembly. Even the base is in two observer will note that the work is not a
sections of 1-in (2.5-cm) walnut, one across single unit.
grain of the other to combat any tendency The original Greek myth had it that
to warp, utilizing wood that had a bevelled Odysseus and his men were captured on
—
edge the natural surface of the trunk from their way home from Troy by Polyphemus,
which the plan was cut. Incidentally, the chief of the Cyclops, the one-eyed giants.
added base-piece made it possible to pose Polyphemus imprisoned the Greeks in his
the spear thrower more accurately and cave. In any case of man versus giant, the
dominantly. ostensible hero dwarfed. To counter this
is

Assembling a carving has a number of to some degree at least, I gave Odysseus a

advantages: It permits last-minute adjust- breastplate and greaves which were slightly

152 CARVING FABULOUS CREATURES

 Upper-body major lines have to be defined
Fig. 285. Fig. 286. Joined figures are tested on base. They
soarm positions can be established. Clearances will be pinned and glued to base at point of contact.
between limbs are quite close.

whitened (pigment rubbed in and wiped extended straight forward but slightly to
off), the only "color" on the carving, so that the right; this again is natural. Also, his left
the observer's eye would be attracted to the foot is forward to balance his throwing arm
smaller figure. and give maximum force to the throw.
The Cyclops is about to push Odysseus Polyphemus' single eye can be a prob-
over with a contemptuous kick. This adds lem.It is centered in the brow, but does it

action, difficult in such carvings because of protrude or is it recessed as ours are? What
the diminutive size. Figures in a composi- happens occupied by our
to the facial areas
tion should not just pose; rather, they eyes? What of the point where eye and nose
should be under stress, suggesting that meet? Obviously, the eye is not shaped, but
some action is taking place, or about to take symmetrical, and normal eye sockets must
place. The carving should, in effect, tell a not even be suggested although the cheek
story. Initially, the angle of Odysseus' spear shape must be retained. I decided to bulge
was not exactly correct (if the Cyclops' one the eye and use what would normally be
eye is and I didn't want solid
the target) eyebrows to provide an underemphasis,
contact between the figures (which would leaving a flat area below them that rounded
throw off Odysseus' cast), so poses could be up into the cheek; the nose is normal, as is

adjusted during assembly. the hairline, when this is done.

Note that the Cyclops' feet are in line There are no particular problems in carv-
with each other and with the center of his ing these figures. The two small ones,
body. This is important. When a man which are only about 3 in (7.5 cm) high, are
stands on one foot, his body shifts sidewise easy, except for Odysseus' strained back-
to center over the support, and even the ward position. The other figure can be
upraised foot will tend to center as a result. carved with his arms in any desired posi-
Note also that Odysseus' left arm is not tion because the arm will be cut through at

STATUETTES 153
Fig. 287. Ulysses fighting Polyphemus is a statuette in walnut about 6 x 8 x IOV2 (15 x 20 x 27 cm). The
giant's arms, the two smaller figures and the base are separate pieces which have to be assembled.

the elbow anyway to allow his upper arm to pads on the arms and on the body as well.
go in of the hole in the giant's hand
one side Both sets of shoulder pads should, by the
while his forearm goes in the other. It is way, be cut too large initially and not cut to
obvious that Odysseus' feet should be flat size until the arms are applied, so the pec-
on the bottom mounting.
to provide secure toral and deltoid muscles can be faired in as
I increase security of such mounts by insert- they should be. I made the arms alike in
ing a steel pin made from a finishing nail in silhouette, so they could be sawed together
each, and the same for the giant. These from the scrap triangle behind the head of
supplement gluing. A pin could also be the Cyclops, then cut into two half-thick-
used between Odysseus' chest and the ness sections. (Allow extra wood around
giant's toe, but a spot of glue is probably the hands also, because the right fist must
enough. be larger than the left to allow for gripping
Because the arms are made separately, the Greek soldier.) And don't forget that the
they can be set wide at the elbows to make arms are a pair— a right and a left and —
Polyphemus appear very brawny and carve them accordingly.
wide. This is done by sloping the shoulder After the arms and body are rough-

154 CARVING FABULOUS CREATURES

shaped, cut through the arm of the Greek
soldier and insert the parts, then try the
giant's arms in various positions. (Note that
I drew them in one position and placed

—
them slightly differently Figs. 287 and
288.) Check the bevels on the shoulder
pads to be sure they are flat and mate prop-
erly, remembering that there are natural
clefts at the inner edge of the pectoral and
deltoid muscles which can mask the joining
line. The shoulders for a burly person
should be about three head-widths, so the
space from head to bevel on the body and
bevel to outer edge of the shoulder should
each be about half a head. This can, of
course, be adjusted after assembly, but it is
preferable to get them approximately right
beforehand.
When you are satisfied with the arm Fig. 288. The planned base was a section of 1-in
(25.4-mm) walnut with one edge tapered as it came
poses, make sure that you've done what from the tree. It seemed better to place Ulysses on a
carving you can in the tight area under the slight rise, both to reduce foot contact with Cyclops

arms, then glue and pin the arms in place. and to aim spear, so a cross-grain block was added.

Be certain that the arms are neither too high

nor too low on the body, and that the right
arm is slightly higher than the left, because On a composition such as this one, I find
the arm is raised, bulging the pectoral and that a combination of carving with chisels
deltoid muscles on that side. Final forming for the heavy cuts and whittling the details
of the arms and shoulders can then be done is fastest and easiest. Small gouges and
(be sure to have a good anatomy text at veiners are, of course, essential in putting
hand). in hair, shaping eyes and ears and the like.

STATUETTES 155
 Portraying Buildings

Buildings, either homes or historic struc- excellent practice in two directions—one of

tures, have a special appeal for most of us. carving in perspective, the other in achiev-
What's more, they can be depicted rela- ing surface textures that appear realistic.

tively easily in a panel carving —

if one starts The house I chose is set on a slight emi-
with the right view. If you have a pho- nence well back from the road. I took sev-
tograph or a detailed sketch of the building eral photographs of it and selected one
facade, that can serve for a low-relief pat- taken from the left-hand front corner. Be-
tern. What's more, a photograph usually cause the house is set high, the camera lens
incorporates the necessary perspective so was at the level of the house basement or
that difficult and tedious task is avoided. below it, so all perspective is above center;
The photo or sketch can be enlarged to the the ground line is practically horizontal,
desired size by photostat or point-to-point while the roof lines are in high perspective.
drawing to get the basic outline, which is Note how the windows in the end gable are
what you need to start. sloped, while first-floor windows are al-
With a head-on view, perspective prob- most level with the base.
lems are minimized and outlines are usu- The house originally had a fireplace in
ally square. If the building is set in bare every room, so it has five chimneys, three
surroundings, you want to add a tree or of which are visible. The walls are laid up
two, some shrubbery, etc., and to strip it of roughly in courses, odd sections of stone
such unsightly excrescences as TV anten- being set in to maintain the lines. (Actually,
nae, telephone and electric lines, and even relatively flat stone surfaces are achieved on
such difficult elements as porch railings, if interior and exterior courses, with rubble
they contribute little to the design. All such filling between them.) The big trees in the
elements are difficult to carve. Greenery is foreground at each side are maples, while
not easy either, but it can be conven- the shrubbery is mostly evergreens, two
tionalized or stylized. trimmed vertical yews flanking the front
To carve a structure in perspective is door. Chimneys are brick.
somewhat more difficult, of course, be- —
Tools are indicated step by step at least
cause lines that otherwise would be hori- the ones I used. The wood was Oregon
zontal, angle to vanishing points at either sugar pine, 2 x 12 x 18 in (5 x 30 x 46 cm).
side of center —and the vanishing points I decided to make the drawing directly on

may be out far enough that drawing some the wood, and enlarged the photograph by
of the lines will be difficult, let alone carv- the point-to-point method, including win-
ing them so they look right. I have in this in- dow and door locations. I had no later use
stance, however, undertaken such a plaque for the drawing, so I did not make it on
as a step-by-step project, to illustrate the paper first; you may prefer to have a draw-
method. A carving like this will provide ing of exact size for reference. It is conve-

156 PORTRAYING BUILDINGS

Fig. 289. Historic Broadstairs in Ghent, New York, is 250 years old with walls of Yonkers traprock
nearly 2 ft (.61 m) with a close-up, provided the basic pattern and detail of rear
thick. This photo,
shed and far-side porch. Flanking trees were stylized and modified to obscure less of the
building; they soften the house ends and amplify the illusion of perspective. Base planting was
modified slightly for clarity. Front-step railing was eliminated; if added, railing could be formed
of music wire set into drilled holes.

nient, by the way, to enlarge from the pho- grounding-out. The depth of carving is
tograph in direct ratio. I had a 3 x 5-in (7.5 somewhat arbitrary. I decided in this in-
x 12.5-cm) print and enlarged it exactly stance to lower the background 1 in (2.5 cm)
three times. I left framing branches on both and to self-frame the carving. Setting in the
sides, stylizing them to soften the edges of lines is not too vital because any crushing of
the carving. the upper fibres will be cut away anyhow,
including the edges of the foliage swags.
Step-by-step carving (Foliageswags are stylized from those in
of a house "portrait" the photo to reduce the obscuring of the
(Fig. 291) The sketch should be strength- house and to permit convenient carving of
ened on the outer outlines to guide in the the background.) Only major outlines are

Fig. 290. This plaque portrait

of the historic house is 2 x
12 x 19-in (5 x 30 x 48-cm)
Oregon sugar pine.
Background is lowered 1 in
(2.5 cm), while house ends
are Vi in (12.7 mm) below the
surface at left and almost Vi
in (19.5 mm) at right. Finish
ismatte varnish followed by
antiquing with teak oil stain.

HOUSES 157
 Fig. 291.

necessary at this juncture. To permit the ing was done with Vs-, Vi-, and 1-in (3.2-,
house corner itself to be at the surface, 6.3-, and 25.4-mm) flat gouges, 54-in (6.3-

small blocks were glued on at the eave and mm) round gouge and Vs-, Vi-, and Vi-in
for the corner bush at the base. These sim- (3.2-, 6.3-, and 12.7-mm) firmers. Depth

plify carving and give a desirable projection was checked with a machinist's 6-in (15-cm)
to the near point of the finished piece. Bost- scale with a slider that could be set to 1 in
(2.5 cm). Any pin with a 1-in (2.5-cm) mark
on it will do, but the scale is convenient.

(Fig. 292) A photo flattens perspective, so if

relief is tobe unusually high, the sketch

must be modified from the photo, depend-
ing upon the depth of relief. (If the house
were in the round, all dimensions would be
true to scale instead of foreshortened; this
would be nearly true of very high relief as
well.) When carving the sloping side and
front, the dimensions of windows and
other details must be carried in from the
surface vertically, so carved around each to
I

get the desired slope to the wall about Vi —

in/8 in (1.3/20 cm), or Vie in/1 in (1.6 mm/25.4
mm). If the depth at the edges were to be
increased to several times that, the widths
of windows and other details would have to
be increased from those in the photograph
to gain a realistic effect. Some care must be
used in setting-in to maintain vertical sides.
To maintain a constant slope on the end
wall, begin by carving the desired slope on
the portion of the wall between first- and
Fig. 292.

158 PORTRAYING BUILDINGS

Fig. 293.

second-floor windows, which is unob- house itself. Eaves can be shaped and chim-
structed, then work outward from this neys cut back to shape, then scored to sug-
base. Tools must be kept very sharp, and gest bricks. (I actually carved vees with a
can be the same as those for grounding-out, knife to outline bricks, which is perhaps
plus a knife for tight corners. excessive detail.) A V-tool can be used for
(Fig. 293) Once the general wall surface is some of this, but it is likely to tear wood
carved, window surfaces can be cut back to across grain unless unusually sharp at
it is

the same slope. Remember to allow wood the tip. Window mullions are not projec-
for the projecting sill and capital on each tions, but V-grooves. You can show sash
window, as well as for the eaves of the outlines, but such detail is unnecessary.

Fig. 294.

HOUSES 159
 Fig. 295.

(Fig. 294) The frontis roughed in the same which in actuality are alike in size and posi-
manner as the end wall was. It is more tion. In this case, the photograph is the best
complex than the side, particularly at the guide for perspective. Once wall and win-
outer end, where contouring is deep and dow slopes are attained, details can be
windows are small and close together. carved, including various capitals on col-
Also, the central pillar of the front door and umns and mouldings. The far-right win-
the decorative windows over it make it im- dow has been antiqued; compare the effect.
possible to get a continuous surface except Note dentate moulding under the eaves
at the eave. Immediately cut down the level and over the door. Texturing of the yew is
of the windows at far right for tool clear- done with a V-tool, cutting out small chips.
ance, unless you have short-bent tools. Al- Maple leaves are an approximation of 5-
low extra width at a major projection like lobed leaves, much larger than scale. The
the front door to get later slope and mould- wall is textured, as are the porch steps and
ings depictedon it, as well as a small porch other elements. The carving was not
and simulated steps in front. abandoned
(I sanded. It was given two coats of spray
the stair rail as unnecessary and not par- matte varnish to seal end-grain areas and
ticularly attractive.) I worked out varying avoid stain buildup there. Then a teak oil
textures for the nearby trees and for the stain was painted over the surface and im-
bushes, actually carving stylized maple mediately wiped off with a cloth, so it is
leaves on the tree areas and using gouged retained largely in depressions. Final sur-
surfaces with enhancing lines on the facing was to polish with neutral shoe po-
bushes, all done with fluter and veiner. The lish.
flared capitals on the windows can be
carved originally. Doors and entrances
Doors have always been symbolic as well
(Fig. 295) Note the difference in the widths as functional: they bar the world or invite it

of the left and right windows caused by to enter, but in either case they are the focus
perspective, also the difference in the of the building and, as result, have received
heights of the yews flanking the porch, special attention from architects, builders,

160 PORTRAYING BUILDINGS

and owners. Carved doors, usually highly
individualized, are familiar, particularly on
public buildings — flat surfaces invite deco-
ration.
Both foliage and fanciful beasts have
been common motifs in design, alone or
mixed with geometric patterns, scenic pan-
els, busts or other significant elements for

highlights. The doors pictured here are

only a sampling of what can be done, but
they range from the blocky carving of styl-
ized animals in Fiji (Fig. 296) through a very
appropriate grape pattern in Peru (Fig. 298),
to the many variations possible in Moorish
distortion of the Arab alphabet to obtain a
scroll pattern of a holy phrase (Fig. 299).

Fig. 296 (above).

The double doors of a winery in Pisco, Peru, are also an
Figs. 297, 298.
advertisement for its product. They show the juice of the grape entering the
characteristically shaped aging jars.

Fig. 298
(right).

ENTRANCES 161
 Fig. 299. Traditional leaf patterns are combined with Arabic letters on a Moorish carved door in
Toledo, Spain.

162 PORTRAYING BUILDINGS

 —

Carving Models

I suppose every boy at heart is a model

Model boats and panels
builder, as is every grown craftsman. Al-
Inevitably, some carvings, particularly
most every whittler is a model builder in a
models, almost demand components of
sense, for what is an in-the-round figure, a
other materials. This project is such a case,
decoy, a windmill? All are models. And a
a proposed gift for the owner of a 28- ft (8.5-
model builder must be a whittler as well,
m) cruiser.
It could have been a scale model,
because the knife is the most versatile of
an in-the-round carving, a panel, or almost
tools and wood the most versatile of mate-
anything else. The model would not just be
rials, be it only for patterns for metals or
a woodcarver's job; it would have too many
plastics. Of course, any model store these
metal fittings and a fibreglass hull. An in-
days has a variety of kits with plastic and
the-round carving would be, in effect, a
metal parts for model ships, planes, boats,
model devoid of some of the fittings, and
—
autos whatever will appeal to the person
likely to be somewhat static as well. My
without the skill or the desire to make his
solution was a panel of the boat at high
own from scratch. Somebody, however,
speed, coming almost head-on, so prac-
whittled the originals.
tically none of the deck fittings and similar
The secret of good model making is ac-
hardware are visible. However, this intro-
curacy and attention to detail. You must get
duces the problems of bow waves and
a likeness, even though it is mechanical or
wake, which for such a boat are mostly
geometric. Two other points that I must
foam, and of a distorted perspective.
mention about models are that they tax
When the project was first discussed, I
your ingenuity and that you will be able to
saw the boat and took a number of pho-
use up not only many otherwise too-small
tographs, both of it and of an oil painting
wood scraps, but also some of those odd
which included it. All were static to me.
bits of metal and other materials that you've
However, we did find a catalogue that pro-
been saving for so long. I find myself using
vided deck cross sections and a 2 x 2 /2-in (5 1

little bits of ivory, brass, bronze, aluminum;

x 6.4-cm) color photograph that suggested
for instance, I used a found wedding ring
the present pose. I enlarged the silhouette
for a crown, a tiny silver cross in a steeple,
by the point-to-point method to fit a piece
an odd-shaped bit of metal for the central
of butternut I had, assuming that, when the
figure in a fountain, and so on. Models
time came, I'd be able to solve the problem
provide an excuse to paw through all sorts
of the waves, and that either music wire
of out-of-the-way stores, and they provide a
(tempered steel) or silver wire would form
great opportunity to show off your inge-
the visible portions of the rails. Whether or
nuity. And it's something to talk about
not the windscreen would be plastic like the
—
modestly, of course when the model is
original was also a moot question.
displayed.

CARVING MODELS 163

Fig. 300. Photo taken for details, note the many fittings, which would clutter up a woodcarving.
Only the horns (whittled maple dowel, silvered) and rails are included in the carving. (Photo
courtesy Bertram Yacht Company. Miami, Florida.)

The accompanying step-by-step pictures 30 x 46 cm), with abit of the scrap glued on
(Figs.302-307) show my solutions, some of to extend the top of the hull where it
them compromises. I tried the waves in bulges, thus effectively increasing the
various forms and techniques, and ul- panel depth to 254 in (5.7 cm).
timately simply stylized them. I added a
front block to make the boat project still (Fig. 303) An hour's roughing withand!4-

more from the background, and I decided '/2-in and 12.7-mm) firmers and a 1-in
(6.3-

upon music wire rather than silver because (2.5-cm) flat spade gouge, produced this
and resistance to ca-
of its greater stiffness blank. Background was lowered V-A in (3
sual mistreatment. Teak or walnut would cm) on a tentative basis, and left with gouge
have been a better wood, particularly for marks plainly visible. Fortunately, grain
—
the figures except their color would prob- was largely parallel with the surface, so
ably have been too dark. Pine or basswood only in one or two spots (upper left, for
would have been too soft, at least in my example) was it necessary to change the
opinion. There is no tinting or color. direction of the cut.

(Fig. 304) Experimental cutting was done to

Step-by-step carving of the cruiser create some sort of wave form, because the
(Fig. 302) A point-to-point sketch was made spray actually resulting from the passage of
of a 2 x 2V2-in (5 x 6.5-cm) catalogue pic- a cruiser at speed is impossible to convert to
ture to provide this pattern; pictures I could solid lines. Original form was a deckled
take were of necessity only details. The irregular surface (left), but this looks more
panel is butternut, l A x
3
12 x 18 in (4.5 x and more like a mushroom or a sponge

164 CARVING MODELS

Fig. 301.Bertram 28-ft (8.5-m) cruiser before a storm, a VA x 12 x 18-in (4 x 30 x 46-cm) medium-relief
plaque in butternut with music-wire rails. Finish is varnish, spray matte or satin, with Kiwi' 5 shoe polish
(neutral on hull and people, brown on background and sea).

Fig. 302.

.J

Fig. 303.

CRUISER 165
 Fig. 304.

now. Tools are Vs- and Vi-in (3.2- and 6.3- ing on the windscreen (which determines
mm) gouges and a veiner. its location and slope exactly), then sloped
other surfaces in accordance. She is in par-
(Fig. 305) The later wave form on the right is
tial profile, which adds complications, par-
a simple series of loops suggesting the solid
ticularly in carving the face so close to the
waves created, with little effort to
part of the
background, but the male is full-faced,
simulate spray. The hull shape was also re-
which makes only the ears a problem. Fig-
fined and the decision made to retain the
ures were done with knives.
glued-on portion, at least for the time
A power cruiser is extensively decorated
being.
with chrome-plated gadgetry: vents, fun-
(Fig. 306) Getting the proper slope and an-
nels, chocks, mooring lights, rails and stair-
gle to the superstructure an exercise in
is
ways all over the place. In this "pose," most

forced perspective. This is not an in-the- of the deck appurtenances are fortunately
round carving, so the third dimension must not visible, but the rails are, and in forced

be foreshortened. In this case, the super- perspective at that. With an action picture
(Fig. 300) as a guide, the railings could be
structure cannot be carried all the way back
to the background at the left (as viewed)
distorted to suit. I began with the simple

because this would not allow enough wood ones at the stern, and left the main rail until
for the female figure, and the forward slope
last. Almost all of the metal work here is
of the front of the boat must be faked as
#18 music wire (0.041 in [1 mm] diameter),
well. This can be done by eye, using the
which is stiff and difficult to cut, but will
right front (as viewed) of the superstructure
stay in position once it has been placed. The

as the high point. It was finished with burgee is copper mounted on a straight
firmer and flat gouge. pin, which in turn is bent around the rail
and glued with "magic" glue, as are the
(Fig. 307) How close the left-hand edge of joints of the supports. To reduce bulk, the
the superstructure can come to the back- wire is flattened before being formed into
ground depends upon the female figure on the loops on the supports.
that side. I carved her practically against the The background was too light and pat-
background and with her right hand rest- terned, and the block glued on the front

166 CARVING MODELS

Fig. 305.

Fig. 307.

CRUISER 167
 Fig. 308. Iceboat (with red-and-white Manhasset
Yacht Club burgee) and Dyer Dink® 10, a sailing
dinghy. The iceboat, tallest of the models, has
aluminum runners and is sloop-rigged (has two
sails). They are of sen wood.

Designs for the 22 yacht-club burgees, or

identifying flags, were taken from a piece of
fabric, but are also available in yachting
books. They were sawed from Vi-in (6.4-
mm) plywood, varnished, then painted
with oils in the three American-flag colors
of red, white and blue (or two of these
three). To give them a little flair, each has a
stub mast of gilded Vi-in (6.4-mm) dowel
nailed to its inner edge.
was visible, so I "antiqued" some areas with Of the ship models, one, about 4 in (10
teak stain, and accented the background cm) long, was carved as a double-sided low-
darkness with brown Kiwi® shoe polish, relief silhouette in mahogany; the others
using neutral Kiwi on the rest. This pro- are assemblies with separately carved
vides the low gloss I prefer. If the dark hulls, masts and spars of split bamboo from
polish is applied and then wiped off before a discarded window shade. Sails are of ex-
it dries, it will create darker edges and lines
otic veneer woods carrying identifying
to generate the "antique" effect. The twin symbols made with oil paints, while rud-
horns are whittled from dowel rod and sil- ders and centerboards or —
dagger
vered. The only other decorations are the —
boards were whittled from birch tongue-
twin white chevrons on the burgee, which depressors and inserted in whittled ma-
otherwise is a natural copper color. (The hogany hulls. Tillers were whittled from
club burgee is dark red and white anyway, toothpicks. Tallest of the boat models is
so copper is close, and is less artificial about 7 in (18 cm). Most elaborate is the
against the background brown.) Mako 17-ft (5.2-m) outboard in Fig. 309,
with a plastic windscreen, a music-wire
Model boats and burgees rail, seats cut from dowels set on brads and

as Christmas-tree decorations a whittled outboard engine with a rotating

A PROFESSIONAL MAY BE ASKED to Carve aluminum prop. It is about 4 in (10 cm) long.
some rather unusual things which some-— All burgees and boats in Figs. 308-310
times involve more painting, modelmaking have miniature screw eyes at balance
or cabinetmaking than actual carving. points, while the sailing models are sus-
These Christmas-tree decorations, for a pended from wire hangers through holes
family very much concerned with sailing, in the tops of the sails, as near balance point
are a case in point. They are really individ- as possible, so that they will hang in sailing
ual and
mobiles, offer ideas for other position. Sailboats were sprayed with matte
carvers who want to do something dif- varnish after assembly to protect them in
ferent. the event of moisture or mishap.

168 CARVING MODELS

 Fig. 309. Mako 17 (left), Blue Jay (lerado sails), Laser International (jungle aspen sail) and Cape
Dory 14 (commonly used for frostbite sailing in the winter, with striped sail — which is tinted
veneer).

Fig. 310. Burgees are uniform in size, 2Vt x 4 in (7 x 10 cm), with Vi-in (6.4-mm) gilded dowels
for stub masts, but differ —
widely in coloration as would be expected. They are more painted
than carved. Colors are red, white and blue pigments mixed with gloss marine varnish, two coats
for opacity. Identification names were lettered on the lower edges.

BOATS AND BURGEES 169

 "
:£" .::•" -S 5

• ::: * .:." :
.:s"

Fig. 311. Before World War II, I photographed this model of the 1746 shop of "Thos. Shaw,
Cabinet Maker & Turner." It was complete with working lathe (belt-driven), stain-mixing and
painting area, tools, fireplace and products.

Figs. 312, 313.Miniature toilet and wash basin for the bathroom of a dollhouse, which I made to
standard 1:12 scale and painted white. Toilet seat and cover are hinged.

170 CARVING MODELS

Fig. 314. Fireplace of the shop model in Fig. 311.

Fig. 315. Miniature furniture in the same model shop.

(More on models and miniatures in Appendix I).

MINIATURES 171
 — —

Carving Faces and Heads

The human figure probably what we

is First: likeness
know most and think we know
intimately The first step in achieving a likeness is to
best. Other things around us animals, — attain a general similarity. You must be able
flowers, man-made and other inanimate to carve a pig before you attempt to carve a
—
objects impinge upon us and we know particular one. For centuries primitive
them after a fashion. We give them human carvers have carved the familiar objects
attributes and describe human attributes around them, and the more gifted or
with them interchangeably. Other ele- trained among them have gone on to carve
—
ments heat, cold, rain, distance, moun- the personality of particular individuals
tains, water, fire, etc. — affect our well- portraits. This is a fundamental urge all

being, so we interpret or represent them in carvers have: to carve a recognizable like-

various ways, but basically we relate every- ness.
thing else to ourselves. This is particularly This is not easy. It involves careful study
true of primitive artists. of the individual to see how that individual
It follows that the most interesting sub- differs from the norm, particularly in the
ject for a whittler or a woodcarver is the face and head. It is relatively easy to dupli-
human figure. Many of the carvings pic- cate bulging muscles, a flat or bald head, a
tured in this book are primitive, but they crippled limb, but harder to emphasize the
are basic as well. They show much more smaller, and more important, variations. If
graphically than words the many ap- you fail, you have a caricature at best, but
proaches and attempted solutions to the more likely a cartoon.
problem we know best, yet never solve The layman is most critical of an attempt
ourselves. This author tries to provide an- to carve a human, because he is best
swers, both by supplying basic proportions schooled in the differences between indi-
and techniques, as well as by showing how vidual people. But it is just as important, if

woodcarvers all over the world have solved you are carving an animate or inanimate
the problem, or have tried to solve it. subject, to be able to see how that individ-
We who have always had trouble carving ual subject varies from what the observer
the human form can take heart from the expects,and to stress those variations
knowledge that we are not alone. A few of enough so that you have a likeness. Regret-
us, gifted with a second sight, are able to tably, a great many carvings of such sub-
carve the human form or face with little jects are inaccurate, and hence
lose what I
difficulty. For the rest, it is a slow and pain- might term a sympathetic treatment. You
ful process. But that is no reason to aban- can put a trunk on a post and call it an
don the effort; the way to make a good elephant, or add a forked tongue to a grub
human body, or a good human face, is to and call it a snake, and perhaps get away
make one after another until they approach with it. But the keen observer sees the dif-
what our inner eye sees. ference and rates your carving accordingly.

172 CARVING FACES AND HEADS

Fig. 316. Four versions of a popular subject, Don Quixote. Compare the simplification, streamlining, and
lack of detail of the stylized version (lower right) with the detail of the others, which also put more stress
on texturing.

How to carve a face —and head ure can be misproportioned, awkwardly

"How do I carve A face?" is probably the posed, or otherwise distorted and we are
most common question asked by woodcar- not particularly conscious of it, but we are
vers intent upon improving their work. Un- immediately conscious of any error in a
like some other operations in the art, there face, however small. What's more, we have
is no simple answer here. This question memorized an endless number of stereo-
leads to a question in reply: "What kind of a types for races, for nationalities, for ages,
face do you want to carve?" and particularly for specific individuals. We
We all use the face as the most important have a catalogue of images for historical
recognition feature among humans. We es- figures based largely upon the face for —
tablish race, mood, background, experi- Jesus, Washington, Churchill, Lincoln,
ence, state of health among strangers and Jefferson, Napoleon, Franklin, and an
identity among friends. We worry about endless number of other people all —
the "face we present to the world." We from some particular portrait or traditional
know a great deal about the face, which we description.
normally look at first and longest when we The individual may, in point of fact, have
meet someone, so we set a higher standard differedmarkedly from the accepted facial
for its proper reproduction. A carved fig- image, but both his face (and his age!) are

CARVING FACES AND HEADS 173

 Contemporary Spanish caricature
Fig. 317 (left).
of Don Quixote(left), with somewhat stylized

eyes and nose. Formal head (Fig. 318, above) of

the same subject is rough-finished and tinted,
and also from Spain. Hair and beard variations
are suggested by gouge cuts rather than the fine
veiner lining of the first piece.

5ANCH0 PANZA&U5T s P .-,„ ^„„t

Figs. 319, 320. This head of Sancho Panza is a companion-piece to the Don Quixote caricature
(Fig. 317),and contrasts sharply with it in that it is stubby where Don Quixote is attenuated.
Similarities in eye treatment identify them as products of the same sculptor.

174 CARVING FACES AND HEADS

now by convention. You can vary his
fixed centered vertically —a very common mis-
body structure and even his clothing with take is to place them too high. Each eye is a
some impunity and few are likely to notice, fifth to a quarter of the width of the head,
but change the face even slightly and even and they are normally about an eye-width
your friends will dismiss the carving as apart. The tip of the nose is about halfway
faulty. from the center line of the eye to the chin,
There is, for most and pain-
of us, a long and the mouth center one-third of the dis-
ful process before the achievement of good tance from nose tip to chin. Mouth width is
faces. No formula will help us beyond the V/i to 2 times eye width, lip thickness (at

initial stages. One can memorize facial pro- center) a fifth of the distancefrom nose to
portions and a series of steps in carving and chin. The ears are roughly as long as the
still not produce memorable faces for a very nose and aligned with it front to back. They
long time. This may be, in fact, one area in are just behind the center of the skull.
which there is no alternative for appren- The most common mistake in face carv-
ticeship; that is, for long and painful prac- ing is have the cheeks too far forward.
to
tice. You must carve a thousand faces, as The angle formed by nose tip and cheek-
Michelangelo said, to carve one good face. bone is roughly 90° and the nose projects
Initially, it is important to understand from the egg shape of the head when
your goal and the steps towards it. What viewed in profile. The chin also projects
kind of face do you want to carve? Is it to be from the same viewpoint, but not as
grotesque, caricature, formal face, or por- —
much only the classic witch has chin and
trait? (see Fig. 316) Is be in the round or
it to nose tip aligned vertically, and even vertical
in low relief? If you are shooting
at formal alignment of brow and chin is rare (and
faces or portraits, endless carving of car- makes for a very pugnacious face).
icatures, for example, will be of little help. All of these ratios are averages, of course;
And once you abandon the profile depic- any face varies from them. That's what
tion to carve faces at various angles, low- makes us individuals. The face is not sym-
relief carving can be most difficult of all, metrical, even if it looks that way; the small
because actual proportion must be replaced differences from side to side account for the
by a simulation of proportion in the third abnormal look of a mirror image. Also,
dimension. The smooth, well-rounded hairdos, beards, jowls and fleshiness tend
cheek may actually become almost angular to obliterate the egg shape, so the basic
in cross section, and eyes and mouth are no proportions are merely takeoff points for
longer uniform. The Egyptians, for exam- carving. (The Spanish caricature carver cap-
ple, spent centuries learning how to carve a italized by making Don Quixote's
on this
relief head other than in profile. face much longer than an egg shape and
making Sancho Panza's almost pear-
The head is an egg —
shaped see Figs. 317, 319 and 320.)
The head is roughly like an egg set on its To me, there are two vital elements in
point on the neck which is half a head long making an in-the-round head in repose.
in front for a male, thinner and longer for a One is the eye size, shape and positioning;
female. The neck is like a tree growing out the other the profile, which includes brow,
of the shoulders and leaning forward, so mouth and chin. The profile is particularly
that the head is set forward, more so in the important in portraiture because it estab-
female than in the male. The face forget- — lishes the basic structure of the face to a
ting for the moment any receding hair- considerable degree. (Typical profiles be-
line — is the length of the hand and about longing to certain races or even tribes are
two-thirds as wide as it is high. A most being obliterated by intermarriage, par-
important fact is that the eyes are almost ticularly in the United States, so that chil-

THE HEAD IS AN EGG 175

 dren today often show decidedly mixed from below so that you create a new sloping
profiles. In countries where there has been flat about a fourth the width of a side.

a considerable period of such inter- Notch the corner at the eye line (Step II),
marriage, Mexico and Latin America for ex- cutting from both above and below. Also
ample, many mestizos are a mixture of mark notch-outs for the ears, the bottom
Spanish or other European blood and one one in line with the bottom of the nose, the
or more Indian tribes, and their precise ori- upper above the eye by an eye width. (It is
gins are almost impossible to establish visu- convenient at this point to draw in a "refer-
ally) ence eye" on the eye line, about a third of
The basic face, whatever its eyes and pro- the block width in length and shaped like
file, is distorted by expression. Surprise the oval of the complete eye, not just of the
shoots the eyebrows up, anger pulls them "open" part between the lids: Step II in
together and down, joy widens the mouth sketch.)
and lifts its outer ends, thus partially clos- Begin to round up the head on top,
ing the lower eyelids, while pique and de- notching over the ears to make this easier,
spair draw mouth corners down (tending and splitting off the wood above the eye
to narrow the mouth). The face is also af- notch to flatten the brow (Step III). Also
fected by age: vast networks of wrinkles, notch below the ears and rough-form the
crow's-feet at eye corners, deep lines neck. Draw in eyebrow lines on the brow as
around the mouth, hollowing of cheeks, arcs meeting at the center of the eye notch
bulging of the nose, possibly greater promi- and rising to Vh. eye widths over the eye line
nence of the chin from loss of teeth, sagging at each side.
jowls. It is also affected by corpulence the — Markin a nose triangle with its apex in
fat face is wider in the jowls and has few line with the top of the eyebrow arcs (so
wrinkles. These are refinements of face there is some width of nose at the eye line).
carving, but are essential if the face is to be Cut V-notches along the nose line to meet
representative and alive, rather than static perpendicular notches cut in along the eye-
and frozen. Try a single head, starting with brow line (also Step III). Mark in the mouth
the nose at one corner of a squared stick. line again, and extend the lines on each side
This automatically leaves wood for the ears of the nose to the lower edge of the jaw. Cut
and gives a reasonable slope to the cheeks, a small notch to denote the mouth-center
an idea which the Mayans used on cornice line, then cut away the sharp point of the
ends a thousand years ago. chin and round the chin and mouth area to
notches extending down from the nose.
Carve a step-by-step head Now begin to rough-shape the eye (Step
Start with a squared block. Mark off IV),remembering that the eyeballs and lids
from one corner, both ways, a line down are about an eye width apart and that each
from the top IV2 times the width of the eye about a fifth of the finished width of
is

block; i.e., if the block is 1 in (25.4mm) the head. Making these shapes involves
square, put the line VA in (38.1 mm) down deepening the grooves between eye and
from the top. This is the chin line (Step I, nose, and carving grooves between brow
top left, Halve the distance
in Fig. 323). and eye, and eye and cheek.
from this line to the top and put in the eye This completes rough-forming, and
line. Now, a third of the wav down from you're ready for the shaping of Step V.
nose to chin, put in the mouth line. (Some Form the eyeball more accurately and slope
authorities make this two-fifths of the wav; the line below the brow. (Here we're carv-
the difference is not too vital.) Now cut in ing an inset eye. Many people have eyes
perpendicularly across the corner at the with folds or laps in this area, but let's leave
chin and nose lines, and notch out wood that for a later head.) Rough-form the

176 CARVING FACES AND HEADS

 —

nostrils and fair off the cheeks next to them.

Draw in a hairline to suit your fancy, then
the ears and nose, and carve the shapes.
Remember that there is a bulge along the
brow line, particularly in males, so slope
back from just above the eyebrow line to the
hairline.
Now you're ready for Step VI, finishing.
Final-shape the ears and put in whatever
convolutions you wish. Do the same for the
nose and nostrils, as well as for the lips and
chin. Normally the lower lip is shorter and
fuller than the upper, and there is a definite
groove between lower lip and chin the —
chin is a fat oval bump, actually Open the
eyes by drawing in lid lines and hollowing
out very carefully —between them. Drill
pupil holes and suggest the outline of the
corneas by shallow V-notching. These latter
steps determine the personality of the face,
so they must be done carefully. Suggestions
and ideas for carving the features are given
in this chapter, including sketches. Study
them! And good luck.

—
Carving the eyes fine points
The eyes are normally just above the me-
dian line of the head, but setting them at the
median line is fairly accurate. There is an
eye width between normal eyes, two eye
widths between the pupil centers. There is
one open-eye width between the eye and
eyebrow, and the eyebrow is highest and
widest over the outer third of the eye. Eyes
may be larger, or smaller, open wider or
less, be wide apart or close. The forehead
ends in the outer rim of the orbital (brow)
circle.

must be considered in
All of these factors
laying out and carving eyes. Some other
factors are sketched. These include: The
upper lid normally covers the upper edge of
the cornea; the lower lid is at its lower rim or
below. (When the eye looks down, the up-
per lid lowers with it; the lower lid does not.
When the eye looks up, the space between
the lids is increased and usually the eye-
brow is lifted as well.) The upper lid ex-
tends over or outside the lower at the outer Fig. 321. Step-by-step carving of a head.

HEADS AND FACES 177

 edge, and the lower outer corner of the the eyeball is nearer the surface of the face at

upper lid extends below the center of the the outer edges.
globe of the eye. Now lay out the lines for the upper and
The canthus major, the eye muscle next to lower lids. The upper lid is normally up

the nose, must be shown if eye shape is to above center a bit more than the lower lid is
be right. So must the bulge of the cornea below it, and the canthus major muscle at the
and the bulge of the upper lid over it. Eye- inner edge points slightly downwards to-
cavity position and shape are very impor- wards the nose; this is actually a slight ex-
tant; whether eyes bulge or are recessed, tension of the eye oval. Cut along the eyelid
whether the line where brow meets nose is lines and bost or ground out wood between
above or below the eye center, and the exact them, retaining the curvature of the ball
shape of the folds below the upper eye- (which isn't a ball but a long oval, as we see
brow, all are important if a likeness is to be it). If you want to be accurate, carve the

obtained. cornea as a slightly raised circle extending

Most of the motion in the eyelids is made slightly under the upper lid. It is a circular
by the upper lid. In fact, a closed eye looks shallow dome about a third of the width of
as if the upper lid had come down to cover the visible eye.
the eyeball, an effect accentuated by the The upper lid has a slight hump over it.

upper lashes, which cover the lower. Also, the upper lid extends just beyond the
Lowering the upper lid therefore creates a lower at the outer edge. In small figures the
brooding or sleepy look; raising can sug-
it pupil can be just a hole drilled (again very
gest, successively, attention, or alarm and carefully to avoid splitting off wood above
fright. In this last emotion, the cornea may and below) deep enough to appear black in
practically disappear upwards. normal light. Final shaping of the lids is the
A wink is not just a closed eye, unless the last operation, with perhaps a slight accent-
winker is an expert. The normal person ing of the cornea edge by V-grooving.
winks by pulling up the cheek muscle be- There are many simpler ways to make
low, so the whole side of the face, including eyes, beginning with the rough V-notch
the mouth, is pulled up. The crease be- and painted dot of quick caricatures. I have
tween cheek and eye is intensified and the sketched a number of conventions (Figs.
lower lid pushed up. Wrinkles radiate from 321, 322); suit yourself, depending upon
the eye corners. figure size and your abilities. Ifyou really
I begin an eye by shaping the oval of the want to be meticulous, don't drill the pupil
eyeball, taking care to make it large enough but carve it out, leaving a tiny regular or
to include the lids and allowing for any arcuate triangle at the top to simulate the
bulge between eye and brow or anything "glint."
— —
abnormal like a puff beneath it. The
eyes may actually slope upwards or down-
wards slightly at their outer corners, and Carving the nose and profile
they may be slightly above or slightly below When statues, ancient or modern, are
the normal eye line. (For rough purposes, damaged, always the nose that bears
it is

the eye line is the center of the skull; actu- the brunt of The same can be said for
it.

ally, for most of us the eyes are just a bit prizefighters and caricatures. The nose is
above that, the skull center line running often considered to be a major factor in
along the center of the lower lid.) Once the determining race and disposition. Nose
eyeball shaped, be sure the eyeballs are
is shape is inherited, so we have Roman
roughly parallel with each other, because noses, Semitic noses, retrousse noses . . .

the eyeballs are basically in line from the you name it. Actually, much of the lore
side. The brow and the cheek slope back, so about noses is untrue. They have certain

178 CARVING FACES AND HEADS

 ^
Wdutt
N I he eye, from tne
> side, it« circle, with

/
I cemu

er, cornea,
l.ddoonoT.
pwjectinq.

rVtrestupperliclcov-
lower
/•

^Jwmu ^ |€ ^ lW
P/p/l>
r.
dcWU
"^
<32S^ (ZS2?
Upper lid erches unifbrm-
ly ever tV| € cy« globe,
cluding 1he projedino.
in-

amta
2^?- Bulging Deep-set HtejV* Lo*
Ey«-fo Id peculiarities. Top often
Armrican, bottom Scots or Irish Variovo cya-a/ea ih*pes 8 location*

Oval' incised »r mound Htxmd Loicinqe Outline Mounded Upper lid onkf half hounds Round Round

<0>!0
Veiner iris Veiner lash Gouqed iris Lidded blank lrii?\ pupil Glirinn iris

Fig. 321. Typical eye conventions: upper line simple, lower line more complex. Sculptured t\Z^

3/ 4/ S/61 I- SfrWeW. **•«»«,

>M»m 4-P.ctrauue
£ Blurt 6-CMId

Nose profiles

l-Kaehmiri. 2- Nordic 3-fentral

African. 4-0>inese. 5-Laafte-Amer.
Widiin 7-flelay 8'6uthman(4u»tt)
I Z 3 4 5 6 7 6
Profile variation* Racial pro-files (After MaWina Hoffman)

Average" profiles- woman, man, child, oldster (After Vvm Rimmer, 1876) Child, woman Xmaiyamt ancestry

^Zfc.^ r^caW S^le 5,m P W DAM ™*««* Notebe^onuppu

Noses- simple (cuiceture) 1b formed Ears- simple to detailed & formed MoutHs* simple (h>ft to full-formed

Fig. 322. Profiles and facial variations.

EYES AND NOSE 179

 Fig. 324. This street orchestra was commonly produced in the Tyrol of Austria about 50 years ago.
The figures are tinted and stand about 6 in (15 cm) high.

physical shapes, but to translate that into the shape and structure of the skull. If the
disposition and the like is folly. skull is rounded in front, the nose tends to
Be that as may, the nose is a key element
it be wide and flat, the forehead receding,
in carving a face, and the shape it is given and the mouth and chin profile both reced-
can be vital. Actually, the nose, forehead ing and longer than the norm. If the skull is
and chin are interrelated, and are based on squared off, the forehead and chin tend to

180 CARVING FACES AND HEADS

line up in profile and we get the classic raises the nose tip above its base, making
relationship of eyes at mid-head, with nose the septum more prominent. Also, there is
tip halfway down to the chin, and mouth considerable variation in how the nose joins
centerline one-third to two-fifths of the dis- the brow. In some individuals, the brows
tance from nose to chin. meet in a V over the nose; in some there is a
The effect of all this is to make the nose transverse wrinkle at the joining; in others,
very important in portraiture more so — the nose actually runs up above the brow
than perhaps it deserves to be. But it is a line or joins it without the declivity that
very visible feature, particularly in profile, most of us have.
so all the details must be right, including The swell of puffy eyes, the shape of the
the ridge line and overall height, as well as lips and chin and the cheek profile are all
the spread of the nostrils, their shape and much more visible in the silhouette than in
inclination, themeeting of nose and brow, the frontal view. So are many of the more
its and so on. Miss
projection from the face, subtle distinctions of race, sex and age. If
the nose and you miss the portrait, and no the correct profile achieved in a carving,
is

mistake. As a matter of fact, make the nose much of the frontal forming of lips, chin
genteel and you have a poor caricature, so and nose is simplified. Thus it pays to study
the rules work both ways. the various profiles in which I have tried to
Nose width is primarily a frontal ele- show the variations, and perhaps have
ment, but it does influence nose shape and overemphasized them slightly (Fig. 322).
projection. A wide nose is usually flat, tilt- The nose itself can be a simple tapered
ing the nostrils andmaking the flesh out- wedge in quick studies, but can be very
side them appear wider than from the detailed in faces expressing a particular
front. A retrousse nose makes the nostril emotion, or in a portrait. Even more impor-
openings more visible from the front and tant, however, in portraiture or emotion is

This bass viol player is in jelutong and is a caricature of a friend. Personalizing

Fig. 325.
inanimate objects is a common form of a caricature and can be quite challenging.

HEADS—STEP-BY-STEP 181
 Fig. 326. Fig. 327.

Fig. 328. Fig. 329.

Figs. 326-329.These male and female heads of Bolivian Indians offer interesting contrasts despite
having the same basic look. Note the wider eyebrows and thicker lips of the woman, and the
prominent Adam's apple and stronger neck of the male, for example.

182 CARVING FACES AND HEADS

 —

the mouth, which actually is the biggest establishes the thinning of the head bulge
single element in expression. changed It is behind the ears, which in turn has to do
in shape to express an emotion, and the rest with the shaping of the back of the head. It
of the face must accommodate itself. Also, must always be kept in mind, even when
we have come to associate full lips with you carve a bushy-haired and bearded
sensuousness, thin lips with severity, re- head.
straint, even parsimony.

The mucous portions of a full mouth may Carving portrait faces

occupy as much as two-fifths of the total —
To make a portrait or a caricature —of an
distance from nose base to chin, par- individual, you must identify and cata-
ticularly in female faces. The female is cus- logue the features that are unusual or ab-
tomarily carved with thicker lips than the normal, even if only slightly so. This is
male, perhaps because we have become ac- relatively easy with some individuals
customed to artificial widening if the lips witness the distinctive hair styles and
are too thin. (Paradoxically, the brutish moustaches of Hitler and Charlie Chaplin,
male face also has thicker, more protruding the big ears of Clark Gable, the craggy face
The hearty laugh is
lips.) supposed to show and mole of Lincoln, the square jaw and
—
teeth which adds a carving problem. mouth of Washington (caused, I am told, by
There are an endless number of details poorly fitted false teeth made of wood), the
about carving the mouth, including the bushy hair and youthful face of Kennedy,
amount of cupid's bow in the upper lip, the the toothy grin of Carter, the specially
comparative "pouting" fullness of the lower shaped and prominent noses of Durante,
lip, the groove from upper-lip center to sep- Nixon, and Hope. Only when a face is near
tum, whether or not to carve a bead along the norm —as in the case of Gerald Ford — is

the top of the upper lip. (It is very rare in there a problem.
nature, but even the Egyptians knew it en- The men I mentioned above are public
hanced the face of Queen Nefertiti.) I al- figuresand have been cartooned so often
ways seem to have trouble with the subtle that the eccentricities of their faces are well
curves at the end of the mouth, and be- known. The cartoonist and the caricaturist
tween it and the chin, because a slight accentuate these eccentricities, of course,
change alters the expression so much. but often so does the portraitist, although
his accentuation is more subtle. Indeed, the
Shaping the ears and jaws line between portrait and caricature may be

The ears, once the amount of projection —

very hazy one may be produced when the
has been established, are basically also a other is intended. I have a life-size portrait
matter of the silhouette. Many carvers give of myself in oil that my wife has never hung
them a fairly standardized shape, with a because the artist crossed that hazy line into
few token gouge lines to suggest the con- caricature — at least in her opinion.

volutions inside. I have drawn, and usually Some of us seem to have been born with
carve, a somewhat more exact shape, be- the ability to distinguish and depict subtle
cause it is quite visible in the full head. differences in countenances. This is true of
Also, the jaw line comes up tomeet the most portrait artists; the rest of us can ap-
middle of the ear lobe. It can be quite prom- proach portraiture only with much effort,
inent in a square-jawed male, almost indis- time and difficulty. Also, the portrait artist

tinguishable in a soft-faced female, and seems to get some of the personality, the
shape varies widely with individuals. But it inner feelings, of his subject into his ren-
does establish the beginning of the neck, dering. It may be a special position of the
and the position of the Adam's apple in head, a quirk of an eyebrow or the lips, a
male necks with prominent ones. It also "look" around the eyes. This is especially

EARS, JAWS AND FACES 183

 7/

The faceless, highly stylized girl (left) is, surprisingly, from Ecuador,
Figs. 330, 331. as is
"Madonna and Child," a simple treatment that is carved both left- and right-handed to be
mounted in pairs.

difficult to accomplish in wood because the frontal flash photos are almost useless be-
material is solid and opaque, while flesh cause they flatten shadows.)
may vary subtly in tint or tone, even, occa- Portraitists have told me that they look
sionally, in translucence. Also, it is difficult for and record, either mentally or by quick
in sculpture to reproduce the eye, to dis- sketches, the slight abnormalities we've
tinguish between pupil and iris, as well as been talking about, and then exaggerate
to show the paleness of the eyeball around them slightly in producing the portrait. It
the iris, and the color and density of the can be a lengthy process of trial and error,
eyelashes. which is difficult when the base material is
Another difficulty is to express the fleet- wood. Even the meticulous transfer of
ing expression caused by muscle move- physical dimensions may not work, par-
ment and the interrelationship of muscle, ticularly if the wood
has grain or imperfec-
bone and skin. This is particularly hard tions, or is difficult to carve. This suggests
when the subject is a child or a fleshy adult, walnut or mahogany, or teak if you can get
because of the absence of the lines and it, all of which have enough inherent color

wrinkles that personalize a mature face. In to create an initial disadvantage. Maple and
my own limited efforts at portraiture these holly are better for color, but much more
elements have caused extreme difficulty, so difficult to work. Pine or basswood are
it is with complete bewilderment that I scarcely worth the time for anything but a
watch portraitists capture a likeness. They quick caricature supported by tinting. And
have an inner "eye" which I do not, appar- texturing —
the development of tiny flat
ently, possess. I have had some success in planes or an overall roughened surface,
working from photographs, which "freeze" which delights the sculptor in clay and
an expression, particularly when they in- gives his work a personal touch — is doubly
clude strong light and shadow. (The usual difficult in wood because such effects are

184 CARVING FACES AND HEADS

usually obtained by appliqueing more base because they're so much faster and more
material upon an already well-sculptured convenient in producing concavities and
likeness, and the woodcarver can't put ma- fine lines.
terial back that he has already cut away All Not all so-called caricatures are cari-

in all, if you attempt portraiture, I wish you catures, of course; some are simply crude
luck. You'll need that, as well as skill and and some result from mistakes; some are
—
patience both for yourself and your sub- simple and some quite sophisticated; some
ject — because a fairly sure way of losing any are original, while many are copies of tradi-
likeness you may have achieved is to fiddle tional patterns. The
line between realism
with it in the absence of the subject. and defined and caricature is
caricature is ill

often an unintended result. The carver is

Carving caricatures seeking to achieve more than a frozen,
Caricatures have undoubtedly brought sticklike figure, or to suggest an emotion or
pleasure and enjoyment to more people idea that goes beyond physical charac-
than formal carvings, whether it be to the teristics. He must do this by providing ex-

carver or to the recipient. Until very re- pression, or by exaggerating a pose or

cently, caricature has not been recognized physical characteristic, which is what an
as an art form because it violates a great artist does when he achieves a portrait that
many of the principles of formal art. Now it is somewhat beyond a photograph of the
is an acknowledged folk art. Items can be subject. Overexaggeration makes a likeness
made rapidly, thus popular prices for
sell at into a caricature, but where the line be-
the most part, and the quality does not have tween them is,no one can say exactly.
to meet some traditional standard. While Caricature and "Western-style" carvings
we tend and whittling
to think of caricature come to having a standard for-
closest
as knife products, caricaturists in Europe mula —most
use a series of notches and
are much more likely to use chisels be- — surfaces to suggest facial contours. The
cause they have learned to carve that way. competent caricaturist tends to develop his
And American caricaturists with consider- own style, often based upon his own coun-
able experience supplement the knife with tenance, and tends to repeat the head in the
small gouges, like the veiner and the fluter, same position and with the same expres-

Fig. 332. Caricature of Don Quixote is not a direct copy of Spanish

versions. This one is from Ecuador and has a flow and unity that
many caricatures often lack.

CARICATURES 185
 South American versions of cowboys: "gaucho" in Argentina, "huaso" in Chile. They are
Fig. 333.
unpretentious and powerful, and often primitive in design.

186 CARVING FACES AND HEADS

sion until it becomes a stereotype. Further, Ecuador is by far the most prolific pro-
a great many such faces are not caricatures ducer of these carvings, with a wide range
as much as three-dimensional cartoons or, of both three-dimensional figures and pan-
more properly, grotesques they rely for — els, as well as a wide range of subject mat-

their humor upon a gross distortion of one ter, from religious figures to animals, par-

facial feature, usually the nose. Such a face ticularly the llama. Mahogany seems to be
can be carved rapidly, with little practice, the preferred wood. There is evidence of a
and its deficiencies in detail are compen- kind of mass production: the same figure
sated for by judicious touching up with will be available in several sizes, with larger
paint or ink. To the serious carver, such a sizes showing more detail. Exact duplica-
face eventually becomes trite. He seeks ex- tion of form and detail suggests profiler
pression, likeness, normalcy, and comes to roughing, although sellers insist this is not
realize, as a sculptor friend remarked, so.
"Caricature is a cop-out." But it doesn't have Peruvian carvings are less regular and
to be. include a number of individual pieces made
It is possible to personalize an object in by Amazon Indians and other remote
order to create a character from a particular tribes. There is less of the Spanish and
calling or to suggest a personal charac- church influence in the work there, and still
teristic. Thus, an identifiable caricatured less in Bolivia, where favorite subjects ap-
human be put on the body of an
face can pear to be the Indians themselves, although
animal or drawn within the outlines of an the technique and finish suggest consider-
object such as a kettle, a pot, a bottle, or able training and direction atop inherent
whatever. One example of this kind of car- The Argentine figures, on the other
skill.

icature is the bass-fiddle player I carved in hand, lean heavily to gauchos and horses,
jelutong (Fig. 325). In point of fact, the pos- but each figure differs in pose and other
sibilities in caricature are almost endless details from its fellows. In Chile, there is
and there is little reason to repeat the same relatively little woodcarving, probably be-
one, unless it is done simply for commercial cause much of the country is treeless or
reasons. nearly so. The emphasis appears to be on
the carving of other materials, except on
South American heads Easter Island, which is Chilean only by
InSouth America, as on other continents, agreement and treaty.
there are concentrations of woodcarvers. Most interesting of the carvings shown
The contiguous
largest, at present, is in a here, at least to me, are the Bolivian Indian
three-country southern Ecuador,
area: busts (Fig. 326). They have similarly "fierce"
northern Peru (which not too long ago was faces, but they are precise in facial detail,
southern Ecuador), and western Bolivia. and I have tried to point out in my sketches
This is a high-altitude, wooded region. some of the elements that distinguish the
Carvings, regardless of the country of ori- feminine head and face from the masculine
gin, are generally similar in type and sub- one. They are superficially alike, but the
ject, well formed and
rounded, well subtle differences between the sexes are
smoothly finished (in contrast, for example, quite clear upon close inspection. How
with those of Argentina, which tend to be many times have you carved a face that
angular, rougher in finish and stained a somehow was of the wrong sex? (The cop-
fairly uniform black). These are not primi- out is of course to put on a moustache or
tive carvings —
they are obviously made by beard, or to rely upon the difference in
skilled carvers to familiar patterns and are hairdo to distinguish between them, but
designed for sale to tourists. that's not sure-fire either.)

SOUTH AMERICAN HEADS 187

 Fig. 334. Stylized gypsy
seer was carved almost
entirely with 3/4-in (19-
mm) No. 6 gouge and
finished with wax only. A
later commission
(foreground) included a
l 3/4-in (4.4 cm) crystal
ball.

Carving for a crystal ball crystal-gazing concept would be empha-

Periodically, I interesting to make
find it sized. The objective was to feature the ball
a composite carving, combining wood with and allow it to catch the maximum amount
some other object or material to provide a of light. Any
frontal panel seemed to en-
striking contrast. Thus, I have used a gold close it much, as did any composition in
too
wedding ring to make a king's crown, an which the hands of the figure hovered over
actual fishing fly caught in a trout's jaw, real it. My ultimate choice was a side view with

chain or cord and so on. The idea is merely the ball cupped in the gypsy's hands, the
a variation of the familiar inlaying with entire figure of the gypsy thus becoming a
shell,metal or other woods for contrast. In silhouette and a support for the ball (Fig.
example, however, my inten-
this particular 334). This effect was accentuated by the de-
tion was to provide some form of display cision not to detail the figure and, further,
mounting for a 4-in (10-cm) crystal ball I to cover with a scalloped texture pro-
it

have owned for over 40 years. duced with a relatively flat %-in (19-mm)
The original thought was merely to carve gouge. I had a block of well-seasoned ma-
a pedestal covered with cabalistic symbols, ple 4V4 x 16!/2 x 16V4 in (11 x 42 x 42 cm).
primarily a pillar with the ball at the top. It The final decision was simply drawn on
seemed more interesting, however, to carve the block and sawed out on a band saw.
a gypsy woman with the ball, so that the

188 CARVING FACES AND HEADS

 —

14

Carving the Human Figure

Carving a famous nude of the sea. She saved shipwreck,

his life in a
Certainly one of the best-known nudes in but had to leave him on shore, where an-
the world is the Little Mermaid who sits other girl found him and revived him. Al-
forlornly on a boulder in the harbor of though the mermaid sacrificed her tongue,
Copenhagen, Denmark. I had seen a great her 300-year life, and her tail to become an
many pictures of her, but when I decided to earthling, the prince eventually married
carve a miniature, all I could find imme- the other girl, and the mermaid became a
diately was a color photo I had taken years mere spirit of the air.
before. I projected that to a 6-in (15-cm) The story I read has her changing directly
height and copied it for my basic pattern, from tail to legs and feet, but the sculptor
deciding to develop the figure as I carved. I shows her with attenuated feet and fins up
guessed that a 6-in (15-cm) figure would be and down shin and calf, so I made her the
a bit under 4 in (10 cm) through, even same way. You may recall, also, that some
posed at the angle of my available pho- years back vandals beheaded her. The
tograph, and I had a piece of mahogany 4 x Danish government found the original
10 x 10 in (10 x 25 x 25 cm), slightly plaster model and replaced the head, com-
checked on the top, and therefore dis- plete with downcast mouth and sad eyes
carded by a nearby piano maker. By the but no tears. Mermaids cannot cry.
time I had the figure roughed out, I had also
found an additional photograph (Fig. 336)
through the Danish Information Service in
New York. They helped but were frontal
views, so the Mermaid's back had to be
largely improvised.
The procedure outlined by the step-by-
step photographs previously can, however,
be applied to any copy from a photograph
or painting, and most will be far less exact-
ing. As you will note, my version is a bit
more plump and buxom than Edvard
Eriksen's original (see Fig. 335) and makes
her look a little older. The original mer-
maid, according to the story by Hans Chris-
tian Andersen, was a 16-year-old who fell in
love at first sight with an earthly prince
Fig. 335. A sketch of the famous bronze by Edvard
when she made her first trip to the surface Eriksen.

CARVING THE HUMAN FIGURE 189

 Fig. 336.The Little Mermaid, made by Danish sculptor Edvard Eriksen, is the
symbolic statue of Copenhagen. She sits on her stone at the entrance to Copenhagen
Harbor. (Photo copyright Royal Danish Ministry for Foreign Affairs.)

(Fig. 337)Lay out the silhouette on a planed the head; then the profile is roughed to

side, using a template or carbon paper, and shape with a (25-mm) flat gouge or
1-in
reinforce the lines with a soft-tip pen. If equivalent. Roughing should be about Vs in
possible, lay out the back as well. If you (3.2 mm) outside guidelines at crucial
have a band saw, you can now saw out the points. The parallel-faced base can be
shape. I used a carpenter's crosscut saw clamped in a vise for this.
and ripsaw, sawing straight lines to salvage
the wood at upper corners. A coping saw (Fig. 338) A double template will prove
can be used, but it is extremely slow and helpful in the next few steps. The interior
somewhat inaccurate on a 4-in (10-cm) template or pattern will provide the base
thickness. Shorter cuts can be made about line of the figure itself and makes early

190 CARVING THE HUMAN FIGURE

 accurate as you can because the next steps
will destroyyour outline of the figure as
well as much of the flat faces, which are
reference surfaces.

(Fig. 340) The view (if one is available)

side
could now be copied on the blank and the
side silhouette sawed out. But I had only a
front view and didn't trust my side
sketches implicitly, particularly because the
mermaid is at an angle to the faces of the
boulder (as was my photo and the
original
silhouette). Therefore, I started with her
left leg almost parallel to the boulder front
Fig. 337.
face, and cut back the front of the block at an
checking easy. The outer template is of little angle which would place her toe Va in
use until final-shaping of the silhouette. (6 mm) in from the block edge, and her left
Plastic, cardboard, or paper can be used; I knee about 3A in (19 mm).
used notepaper in this instance because
these templates have short-term functions.
(Fig. 341) Lay out the knee positions and cut
back the face of the block to expose the right
(Fig. 339) Bring the silhouette fairly accu- knee. You will need V-tool, '/4-in (6-mm)
rately to shape. The safe way to do this is to and Vs-in (3-mm) firmers; the 1-in (2.5-cm)
draw lines across with a square at critical gouge is too big. Now begin to form the
points, and to then cut guidelines with a legs, shaping the lower legs and allowing
deep Vi-in (6.3-mm) gouge or a fluter. wood for the fins. (Unlike the usual mer-
Check these guidelines with the square to maid, she does not have a tail; instead, her
be sure that they are square with the outer feet are overlong and she has fins extending
faces and of uniform depth across the block; from the shinbone, back of the calf, and the
they generally tend to be high in the mid- heel.) Locating and shaping the feet and
dle. (I have left one or two gouge lines to knees will provide the approximate location
show what I mean.) Now, with the 1-in of the buttocks, and shaping the leg gives
(25.4-mm) gouge, fair the surfaces to just the point of contact of left elbow and thigh.
outside the guidelines, using the channels
and the square to check for accuracy. Do not
detail the face or fingertip silhouettes; leave
wood there in case you need it later. Be as

CARVING A FAMOUS NUDE 191

 When this is approximated, the arm can be
laid out and roughed. Corners of the boul-
der have been rounded in front merely for
convenience and comfort in handling.

(Fig. 342) Set in the outline of the left arm

and cut away wood above and below, slop-
ing the shoulder back at the same time.
Remember not to cut out wood high on the
chest; you must leave wood for the left
breast, which projects forward of the arm.
Also, the right knee is in back of the left,
and the line of the knee fronts will establish
the line of the shoulders and buttocks fairly
Fig. 340. accurately, because her torso is not twisted.
To locate a given point on the blank, place
the template accurately over such surface as
you can, and stick a straight pin through
the desired spot into the wood. In cutting
the arm, leave a little extra wood where
possible for shaping. It is easy to cut away
wood, but difficult to put it back.

(Fig. 343) Establish the lines of the breast

bottoms and the cutout between right arm
and body. Shape the breasts and cut away
between them and the left arm. Also bring
the right shoulder back so that it is behind
the left one, a little less than parallel to the
knee fronts. Begin the cutout between right
arm and body. This must be done very care-
fully, or you'll be short of wood for the right
Fig. 341.
or left arm.

(Fig. 344) Begin to cut the stomach well

JMM I back, particularly on the right side. The
mermaid is not sitting erect, but is slumped
over in which accounts for the slightly
grief,
forward hunch of the shoulders and the
exceptional hollowing of the stomach. It

will also account later for a rounding of the

middle of the back. It may be of assistance at
this point to rough out the shape of the
hollow between right arm and body and to
begin to define the face as a reference. Note
that I have merely indicated the nose,
which makes quick relocation of the tem-
plate possible. Once the line of the nose is
established (front to back), the back of the
Fig. 342. head can be cut away to the shoulder in

192 CARVING THE HUMAN FIGURE

preparation for locating the neck. Also cut
away wood above the breasts and prepare
to locate the right hand by cutting back at
the wrist. In this pose, the mermaid is not
resting on her right hand —
the heel of the
hand is actually slightly raised so that her
weight is essentially on her right buttock
(which will be lower than the left because
she is sitting on her feet, which extend to
the left).

(Fig. 345) By sighting from the side, locate

the rough line of the back and begin to
remove wood there. Don't go too far ini-
tially: remember that the curved back and

the weight on the right buttock will cause it

to bulge slightly. However, the buttocks
should be in line with the knees. Also, if Fig. 343.

you haven't done so previously, shape the

legs and feet, allowing for the fins, and
round off the boulder behind them to the
general shape. Don't chamfer it yet, be-
cause we are still in doubt about the precise
position of the right buttock. The same goes
for the back of the head, because that de-
pends upon where the front of the head
ultimately will be. Also, begin to shape the
left arm and to hole through just above
the elbow, which will establish the line
(depth in from the front) of that side of
the stomach.
Fig. 344.
(Fig. 346) Now time to establish the
it is

lines of the back and the right arm. Begin by

creating the hollow on the left side behind
the elbow, then round the back, remember-
ing that her back is a curve from top to
bottom because her pose is one of utter
dejection. Also, work in from the right side
around and behind the hand so that you
can establish that buttocks line. Lay out the
rough banjo-shape of the back, and round
the buttocks and waist to agree with the left
side. I found at this point that I had esti-
mated the top of the back of the rock almost
Va in (6 mm) too high, because the right
buttock was obviously too shallow and was
not enough below the left to make the pose

Fig. 345.

CARVING A FAMOUS NUDE 193

Fig. 346.

natural. When the top was lowered, the left

foot gained needed thickness as well.

(Fig. 347) With the general shape of the back

worked out, draw in the line of the spine.
Basically, it is a curve from the base to the
waist, then bends
almost straight up.
to rise
Also round the back of the right shoulder
and continue to shape the back and right
buttock, working carefully on the latter so
that it is in line (with respect to both height
and position) with the right knee. It will
help, at this point, to remove the wood be-
hind the left arm, down to the level of the
thigh. The right thigh, by the way, is almost
horizontal on top, front to back, rather than
rising as the left one does. It is also sensible,
at this point, hollow out between the
to
thighs under the left arm, a tricky job that
requires small tools like fluter, veiner, and a
small firmer or flat gouge, preferably V\t> in
(1.6 mm), or a long-tipped knife blade. The
left wrist is actually free of the right thigh,
but I would not cut it loose yet.

(Fig. 348) Now shape the right arm, par-

ticularly at the shoulder, to establish the
line of the upper chest and breasts. This
will, in turn,provide the base of the neck
and the general location of the head, which
is turned to the right so that the line of the

nose is about midway between right nipple

and right shoulder. You can also begin to
rough out the head, rounding it on top and
establishing the general hairline, so the face
can be positioned below You will proba-
it.

bly find, as I did, that the upper back should

be thinned and rounded more, and that the
breasts are too large and too far forward.
Also, there must be a crease across the
stomach because of her stooped position.

(Fig. Shape the cloth below her left

349)
hand and the hand itself. The hand should
hang, half-closed, from the wrist, with the
cloth caught between thumb and first finger
and trailing from the fingertips. Cut a deep
vee beneath the wrist to lift the hand from
the right knee. (This can be sawed through
with a thin blade, but will be stronger if left

Fig. 349.
solid in back.)Shape the face, chin, and
neck and carve the face, remembering that
her mouth should curve down at the cor-
ners to show dejection. Be sure the line of
the right shoulder is low enough as it joins
the hairline so a bit of the neck shows on the
right. You probably have to thin the
will
neck. I did all of this work with knives, one
of which had a concave edge.

(Fig. 350) Finish the right hand and lift it

from the rock by undercutting. The heel of

the hand should be up almost Vi in (6 mm)
so the fingertips can turn down and in. To
Fig. 350.
reduce the blocky effect of the base, round
the front corners, put in a notch on the
front, and lower the right rear top of the changes to make. I spent two hours, for
rock. To get a coarse, open texture such as a example, thinning down and shaping the
rock would have, I sanded it with a rotary right arm and shoulder, another two hours
sander to fair in knife cuts at the same time, removing and other imperfec-
fine burrs
then finished with fairly coarse paper near tions elsewhere. The
figure was finished
the figure. The figure itself is not sanded, so with spray matte (satin) varnish and clear
that the small planes left by the knife will shoe polish. I made a number of changes
catch the light. This also increases the con- and found that I could mask
thereafter,
trast between girl and rock. them completely by rubbing in a bit of poly-
A final word: Once the figure is finished, ester varnish in the shaved spots, wiping it
set it aside for a day, then look at it again, off,then applying new coats of shoe polish
closely. You will find a number of fine over the area.
 |

ti ikti
\
»
«

Fig. 352. This immense carving of Paul Bunyan, at Bangor, Maine, is 31 ft (9 m) tall. Peavey and ax
heads are steel; base is built up of native stone. Paul Bunyan is the legendary lumberjack. Stories
have it that Paul weighed 50 lbs (22.5 kg) at birth, and soon outgrew houses and had to sleep out-
of-doors. Another legend claims that rocking his cradle caused the high tides on Penobscot Bay,
and that the Maine lakes are in the footprints of Paul and Babe, the blue ox. (Maine Department of
Commerce and Industry photo.)

196 CARVING THE HUMAN FIGURE

Human proportions or woodcarver who is familiar with propor-
The typical whittled human
figure tion will turn out a better figure, as a sculp-
turned out in the United States today is a tormust.
male, often fairly mature and fully clothed, There are certain basic proportions for
usually in ill-fitting garments at that. He has the figure, some of them dating back to
three wrinkles at each elbow and knee, a Greece and Rome, including: an arm span
sagging seat, and a smirk. A major part of equal to the height, the foot the same
the reason for this is that most whittlers length as the head, and the face the same
haven't taken the time to learn the propor- length as the hand. We also have developed
tions of the human figure, and it is difficult, a basic guide of measuring the body in
anyhow, to work as the sculptor in clay "heads": the average male is 7Vi heads tall, 2
does: making the figure in proper propor- heads wide just below the shoulders, 1V2
tion, developing the musculature, then ap- heads wide at the hips, with arms 3 heads
plying clothing or draperies. Such a proce- long below the armpit, and fingertips to
dure is difficult when one is working from elbow equalling 2 heads. The average
the outside in. Nevertheless, any whittler female is somewhat shorter, with narrower
shoulders and a broader, shallower pelvis,

«• Squared off

Bnoh insrrtrd

Fig. 353.

Lonq pllne »,
Jimptt Xirloce,

Fig. 354.

Figs. 353, 354. Three old Danish caricatures of country people include a seated couple and a chimmey
sweep. Such figures were formerly carved by farmers as a wintertime occupation, and were usually colored
with dull tints.

HUMAN PROPORTIONS 197

 Fig. 355. Fig. 356.

Figs. 355, 356. Michelangelo made his males 8 heads high, but his females TVi heads tall.
(From "Bridgman's Complete Guide to Drawing from Life.")

hence wider hips. The narrower shoulders The male body averages 1?A heads for the
combine with shorter and straighter collar- neck and trunk (Vi head for the neck, or
bones to make the neck longer and more less), and 3 3A heads for the legs and feet.

graceful, but put more slope in the shoul- The feet are a head long and half a head
ders. Also, the female neck tends to have a wide. From the ground to the crotch is
greater forward angle, so there is a greater roughly half the height, as is the distance
tendency to look round-shouldered, par- from the pit of the throat to the tip of the
ticularly in older women. The female has a outstretched middle finger. Upper and
shorter upper arm, hence a higher elbow lower legs are equal in length. The dis-
location and shorter overall arm length. tances from the sole to the top of the

198 CARVING THE HUMAN FIGURE

 Figs. 357, 358. Companion mahogany busts from the Philippines each about 8V2 in (21 cm tall),
show how the female curves are gentler than the male from shoulder to nipple.

kneecap, from the kneecap to the point of center of the figure is the top of the hip-
the iliac (farthest forward part of the thigh bone. It moves down steadily as the child
bone), and from the pit of the throat to the matures, until it is with the pubic bone
level
lower line of the rectus abdominus (front ab- in an adult male and slightly above it in the
dominal muscle) are equal. Roughly speak- female (because of her shorter leg length).
ing, the body can be divided into three The child of one to two years is about 4
parts: neck to hips, hips to knee, and knee heads high, at three years is 5 heads high
to sole. The distance from the sole to just and at six years, 5Vi heads. The child of
below the knee is a quarter of the height, three is about half the adult height, of ten,
and the distance from top of head to pit of about three-quarters adult height. The gain
throat multiplied by 5Vi is the total height. in height is about one head between ages 1
In the male figure, the elbow is at the top of and 4, 4 and 9, and 9 and 14 and re- —
the hipbone and the fingertips are halfway member that the head
growing larger as
is

between crotch and knee. The female torso well. The small child's head is almost
is proportionally as long as the male, but round; lengthens in proportion as the
it

the breastbone is shorter, so the abdomen is skull enlarges. Lack of knowledge of these
deeper and the legs are likely to be shorter. relationships is the reason so many primi-
However, in females the leg length varies so tives carve a good Madonna but a very ma-
greatly that it is difficult to estimate the ture Child.
standing height of a woman who is sitting While only the stoop is commonly recog-
or kneeling. nized, both male and female figures change
Proportions of the figure vary widely with age and posture. The female figure
with age, of course. At birth the center of tends to become broader and thicker
the figure is above the navel; at two years through the abdomen and hips as a result of
the navel is the center; but at three the childbearing. Both sexes tend to develop a

HUMAN PROPORTIONS 199

 This modern Balinese nude is
Fig. 359 (left).
surprisingly stumpy. Note the oversized head. Fig.
360 (above). Another modern Balinese nude, again
with a head that is out of proportion with the body.
It is, however, more graceful than the nude on the

left.

"pot" as well as the stoop, with advancing ian ones. Most of them show the subject
age. Women become noticeably round- with a smile or a grin, in many cases self-
shouldered as a result of added flesh be- deprecating because of the smiler's dilapi-
tween the shoulders. Compression of car- dated condition. We have developed a style
tilage between the spine segments and be- similar to the Scandinavian in our so-called
tween joints reduces overall height, and "Western," "mountain," or "Ozark" car-
loss of muscle tone causes general sagging. icatures. The cowboys and In-
subjects are
The early-adult balance of the forward pro- dians, tramps or workmen, but the stump
jection of the chest with the rearward pro- or over-thin figure, the ill-fitting clothes
jection of the buttocks is lost, allowing the and the V-notch wrinkles are characteristic.
chest to be less prominent and the buttocks Better figures have strong planes, light or
more so. no tinting,and some emotion expressed in
Scandinavian carvers have for many faces which are generated with relatively
years produced angular, blocky figures that few cuts.
are very well done. (Fig. 353) They are al-
most formulaic: three creases at elbow and
knee, saggy breeches, wrinkled coats, Torsos
slightly battered hats. Tyrolean carvers pro- In terms of planes, the male torso is a
duce rounded, chubby figures. African rough trapezoid from the line of the shoul-
carvers produced lampoons of the white ders to the nipples, almost at right angles to
men and women who bought them; these The abdominal plane
the sides of the body.
tended to attenuation, as do modern Hait- extends downwards from the nipples as a

200 CARVING THE HUMAN FIGURE

rough triangle sloping inward to the navel, largely a series of harmonious curves, while
where it meets a plane rising from the the muscular male torso is much more diffi-
crotch to the navel. In back, the line of the A slight change in pose alters
cult to carve.
shoulders forms the base of a triangle that muscle location and size, and smoothing
extends downwards and inward to the the muscle curves tends to make a male
waist, where
meets a wider trapezoidal
it torso look effeminate. The female torso is

plane rising from the buttocks. The front affected by change of position also, but the
planes tend to have a convex curve, the surface effects are not nearly so evident.
back ones a slightly concave one, which is These comments, of course, are intended
divided centrally by the groove denoting to apply to formal and properly propor-
the backbone. tioned, as well as somewhat idealized,
The female figure is basically similar in youthful figures; older people are rarely
structure, except that the plane of the depicted in the nude anyway.
shoulder extends farther outward to the Artists me that it is
tell not possible to
nipples and meets the planes of the side in a sculpt the human figure without a live
gentler curve. (Figs. 355 and 356) The model and some training in anatomy, but
frontal planes are divided by the groove of this is not necessarily true. It is possible to
the breastbone. Note that the breasts are set create creditablenudes without formal
atan outward angle to the front of the torso training, although working with models is
because of the curvature of the breastbone a distinct help in locating muscle positions
and rib cage. In the female, also, the upper- and the like. (One difficulty is that many
back plane slopes outward more to the models are nowhere near ideal in their pro-
lower line of the shoulders, then inward to portions.)
the waist, giving greater curvature to the Nudes made as panels are quite difficult
backbone and a greater stoop to the shoul- because the third dimension must be flat-
ders. While the male neck is short and thick tened, and there is the ever present pos-
and rises firmly from the square shoulders, sibility that the figure will look flat as a
the female neck is longer, more slender and consequence. Meticulous care must be
more graceful, and rises at a greater forward taken to produce continuous curves on sur-
angle. Thus, in both sexes, the line of neck faces. Also, the method of mounting is very
to head is not vertical, but slopes forward. important, unless the figure is a silhouette.
Also, the neck is not simply a cylinder. It
tapers like a tree growing from the shoul-
ders, more so in the male than in the female Musculature is vital
because of his normally greater shoulder- in a male figure
muscle development and heavier neck When Jupiter and his brothers rose up
muscles. In addition, the male has the against their father, Saturn, and overthrew
Adam's apple at the top. The female figure him, the Titans, a race of giants, were on the
also commonly has a considerably greater wrong side. Therefore, Atlas, a Titan leader
outward slope to the planes of the lower who surpassed all men in bulk, was con-
back, caused by the thicker thighs and more demned to support the heavens on his
rounded abdomen, which creates a larger shoulders forevermore, or so goes the
diameter at the buttocks and proportionally Greek myth. But Atlas also grew fabulous
wider hips. golden apples, so Hercules took over the
Greek and Roman artists glorified the support job on one occasion while Atlas
male nude, but European artists since that picked him some apples, and on another,
time have preferred the female and consid- Perseus came for some. When Atlas re-
ered it the ultimate in artistic achievement. fused him, Perseus showed him the
Instincts aside, I find the female torso Gorgon head, which he was still carrying,

torsos and muscles 201

 Fig. 361. Sir Walter Raleigh is in cypress and stands
24 ft (7 m) tall, including the 5-ft (2-m) welded-steel
base. Arms are pegged and glued in place, and
entire figure is coated with transparent plasric-base
coatings. It is now on Roanoke Island, North
Carolina. (Photo by J. Foster Scott, Dare City Tourist Bureau.)

roughness of the man. I carved the figure

progressively, from the top down, as the
photographs illustrate (Figs. 363-372), to
minimize the risk of breakage. Also, carv-
ing the head and arms to form helps in
proportioning the lower torso and legs
later. The blank can, however, be band-

sawed completely, because the wood be-

tween the legs provides the necessary early
strength.
A major job with this piece is the forming
of the sphere, because small inaccuracies in
its roundness will be painfully evident
later. Therefore, an accurate template of the
desired size should be used made —and
frequently. Also, frequent checks should be
made to ensure that the sphere, head, and
arms are in proper relationship. One ten-
dency will be to make Atlas have an over-
long neck, for example, or to give him
and Atlas turned to stone, becoming the shoulders that are too wide. Both are
present Mount Atlas in Greece. caused by doing too much body-shaping
I found this nude male to be much more before the finished size of the sphere is

than the female ones. After all, if a

difficult attained, so that when the sphere is ul-
female has enough softly rounded curves timately rounded, the body will no longer
and is overlarge of bust and buttocks, that is be in the required pressure contact. Beware
acceptable, but a male must show muscles, if you plan to have relief elements on the

particularly a male in the strained position sphere itself, because they may distort its
of Atlas, and muscle bulges change radi- shape so much that it looks grotesque. I
cally with each change of pose. It is advisa- chose the safe way and did the sphere deco-
ble to have at hand some standard text on ration with a V-tool and knife as a final
anatomy or any reliable source in which carving operation. I showed a series of con-

muscles are delineated. The familiar statue stellations, each with stars indicated with
of Atlas in Naples shows him as a some- silver wire. I held the figure on my knees,
what streamlined figure, not at all bulky, both to do the incising and to make the
and with no strain evident in muscles or holes for the silver-wire inlay.
face. If he is to embody the myth properly, In any carving of this sort, it is advisable
he must be modified. to stop periodically, as any good sculptor
I chose walnut for the wood, partly be- does, for an overall inspection. For exam-
cause of its color and partly because I ple, on one carving I discovered I was care-
wanted tool marks to show, at least to a fully carving a six-fingered hand. Your eye
degree. They emphasize the strength and will pick up such errors if you give it the

202 CARVING THE HUMAN FIGURE

Fig. 362. Atlas is in walnut, roughly 4 x 4 x 10 in (10 x 10 x 25 cm) including base. Familiar
constellations are incised on the spherical firmament, with 150 stars picked out by silver wire inserts in
three diameters to correspond roughly with star magnitude.

chance. Beware of concentrating too long

on one little area.
When was completed, I felt
this figure
should suggest a rocky-
that the base surface
area, so several parts of the surface were
layered like shale. Also, the original base
seemed to be too thin for the subject size —
had been dictated by the wood available.
Thus, another section of walnut was added
to increase overall height from 8 to 10 in (20
to 25 cm).
The blank was held in a wood vise for the
heavier shaping, most of it done with Vi-m
(12.7-mm) flat gouge and firmer, and with a
light mallet. Details of face and musculature
were done with smaller chisels and finally

Because the figure is small, the blank can

Fig. 363 (left).
be sawed on bandsaw. Sawed-off pieces are replaced
a
temporarily to avoid destroying sawing guides. If
necessary, they can be held in place with glue or with
toothpicks in holes drilled in waste wood.

TORSOS AND MUSCLES 203

Fig. 364. Relationship of head, neck, arms and Fig. 365. If the firmament is to be spherical, make a
hands is crucial, so begin final shaping with them. cardboard template of the desired size and use it
Avoid making the neck too long and shoulders too frequently. One side of the template should be cut
thick. away at an angle from the end of the arc to provide
clearance for checking near shoulders and head.

Fig.366 (below). With head, shoulders and arms

shaped, the torso can now be defined. Legs are not Fig. 367 (below). Back and front of figure must
separated, however, until all heavy cutting is done; obviously be worked together to be sure the torso is
nor are feet detailed. This avoids danger of splitting in proportion. Here again, templates may make
near base from stress at the top. frequent replacement of cutaway lines unnecessary.

204 CARVING THE HUMAN FIGURE

Fig. 368.The legs can now be separated and Fig. 369. Shaping of shoulder and buttock muscle
shaped. Base is lowered to reveal feet and permit bulges important in achieving general body
is

shaping of ankles. If sex organs are to be shown, contours. Points of elbows and knees are formed
leave wood for them. and wrist and ankle bones located.

Fig. 370 (below). When contouring is complete,

musculature can be put in as well as final details of Fig. 371 (below). Musculature is as important in
face and extremities. Base has been slabbed and back as in front. Note difference in buttock heights,
figure given a preliminary varnish coat to check and stress lines in thigh muscles. Detail of base
light effects. slabbing is also evident.

TORSOS AND MUSCLES 205

 Fig. 372. Right-side view shows heavy thighs, legs and
shoulders. The hands are not particularly stressed; they
are merely balancing a load pressing down on
shoulders and body. Star holes were drilled and plugs
of silver wire driven in, glued, then filed smooth.
About 150 stars are shown, in three wire diameters.

tied pieces are similarly stiff and are mis-

proportioned as well, so they are more
caricature than statuette. Often the whittler
has had no training in human proportion,
had no suitable model available, was lim-
ited by a particular block shape, or was
timid about cutting elements free. These
may be excuses of the sculptor as well; the
old Greeks often carved action figures with
arms, feet or legs supported by unnatural
columns, bushes, or just lumps of material.
There are subjects which can readily be
spoiled if any of the preceding things are
—
done or mis-done. Sports figures are an
excellent case in point, because the best
poses involve an instantaneous freeze of a
moment of supreme stress. The game of
with a knife. A statuette of this size is small squash offers a good example because the
enough to be held in the hand for finishing, players are constantly in motion, and at
and can be turned readily for comparative about twice the speed of tennis. The player
viewing during the course of the carving, is frequently only slightly in contact with
so it presents relatively few problems, ex- the playing surface, and his arms and legs
cept for those involved with depicting are spread. Also, the racket represents a
stress in muscles and face. difficult sculptural element. (The finished
figure can be seen on page 53, Fig. 63.)
Action figures Thus, was with some misgivings that I
it

Many sculptures are undistinguished and undertook a commission of and for a

stiff, and so formal as to be almost un- squash player, to be executed in mahogany.
natural. Even higher percentages of whit- I had available an action snapshot that was

Corona
jLo! Uotth SW

Draio'U

Draco CtW>n) Car\c«r (.Crab) Arias (.Ram)

were selected largely to fit the surface, though they do include the Pole Star and
Fig. 373. Constellations
immediately surrounding figures in proper relationship.

206 CARVING THE HUMAN FIGURE

 Fig. 374. Rough blanking (left) was done with a straight saw and chisels. Because the figure was
small and easy to hold, whittling was the simplest method of fabrication.

Figs. 375, 376. Rough blocking locates shoulders, hips, and limb position. Face, shoulders, feet,
and hands are detailed, the right hand being shaped after the hole for the racket is drilled (right).

taken from dead front, which of itself is far across grain that it would be too fragile

rather difficult to find. (Squash courts have to withstand ordinary dusting. Thus, this
side walls, so most photos are taken from figure is held to its base with a steel pin
above, foreshortening the figure.) Because running up through the ankle at an angle
the player was obviously in contact with the designed to provide maximum support,
floor only on the ball of one foot, with his and the racket was separately made and
body tilted well to the side in a turn, it inserted.
seemed inadvisable to make figure and A major problem was to provide a match-
base integral. By making the base separate, ing side view, because the legs are spread
I could gain both strength and contrast with much wider than the frontal view suggests,
the figure itself. Also, the racket projects so and the elbow positions are not obvious

ACTION FIGURES 207

 Fig. 377. Statuette is 4x 7 x lOVi in. (10 x 18 x 27 cm) in walnut, over a rosewood base, and was
executed from photographs of all four sides enlarged to carving size and converted to patterns.
Photos of the original bronze statue, 10 ft (3 cm) high, that resides outside the United Nations
building in New York City, provided a major guide to musculature.

either, nor is the twist in the back which deal of roughing. By the same token, the
makes the right shoulder appear narrower figure was difficult to hold in any conven-
than the left in the front view. (This will not tional way while cutting was done, and I
be a problem for those who elect to dupli- found it necessary to whittle much of it.

cate this figure; I mention it for those who Also, I made the figure somewhat heavier
elect to depict some other sportsman in in build than the drawing, because the cli-
some other pose.) ent, asquash player, is sturdy in contrast to
Because there was no base, the entire sil- the thin and willowy Pakistanis who are the
houette could be sawed out to avoid a great champions in this sport. It was obviously

208 CARVING THE HUMAN FIGURE

Fig. 378. Action poses give and movement to figures
life
and carry them out of the and mediocre "portrait"
stiff
pose. Sports pages are full of photographs that can be
converted into such carvings. Carve the figure in low
relief, letting the background support the fragile elements
like outstretched arms and legs. (Right) Here is Peggy
—
Fleming performing a back spiral cut across grain.
Checks were prevented from spreading by a vertically
grained 3A-in (19.5-mm) backboard that also sets the
plaque out from the wall. The 7-in (18-cm) circle on 1 x
9V2 x ll 3/4-in (2.5 x 24 x 30-cm) Oregon pine suggests a
spotlight.

(More Action Figures will be found in Appendix I)

necessary to work carefully on the feet and

arms because of the grain, and to be con-
stantly aware of having wood available for
the shirt and collar.

The racket is difficult, no matter how it is

made. I elected to make it of some other

wood than mahogany, to increase the
strength. I used maple, stained to approxi-
mate the color of the mahogany. The string-
ing could have been done in several ways.
The all-wood method is to thin the area
within the rim, then to groove it with a
veiner so that the string pattern is inverted.
(Only a Balinese would attempt actual carv-
ing of the strings.) Another method would
be to form the racket and drill its rim for
stringing with monofilament nylon or fine
copper wire. However, I hit upon the idea
of sawing the hollowed rim lengthwise
with a fine-bladed jeweller's saw, then in-
serting a piece of aluminum fly-screen and
gluing the assembly. After the glue set, the
edge of the screen was ground away to leave
an edge that looks very much like that of a
strung racket.

with the thumb thrust between the

Fig. 379 (right). Figa, a fist
second and third fingers, is a good luck symbol in Brazil,
usually worn as a pendant. This one is 10 in (25 cm) tall,
thrust upward, and emerges from the hat of a typical farmer.
The hand has no creases.

ACTION FIGURES 209

Hands "Hands are one part of the anatomy which
Better known than any subject in the must be brought to life as you work them,
Western World, except the Nativity, is Al- otherwise they will look like a pair of
brecht Diirer's (1471-1528) famous "Praying gloves. Take a careful look at your own
Hands." The hands have been copied com- hands while you carve this pattern. Note
mercially in drawings, sketches, and paint- the difference in thickness in the fingers
ings in various media; as plastic, plaster, between the joints ... try to get the
china, wood composition, and wood pan- wrinkles at you see them in
the joints as
els or wall decorations —
perhaps even in your own hands." Mr. Lohs has carved this
brass and cast iron at various times. But, subject numerous times, improvising a dif-
paradoxically, Diirer himself never incor- ferent background each time (Diirer's
porated them in any of his famous wood- sketch had no background). The hands can,
cuts! The Betende Hande was only a sketch. of course, be carved without a background;
Hands are extremely difficult to carve these are practically in-the-round, anyway.
well, and this 475-year-old design will pro- They were carved in maple, but can be
vide excellent practice. Martin Lohs, Cin- carved just as readily in pine or basswood.
cinnati, who made the copy-sketch and The work was stained to add character and
panel pictured (Figs. 380, 381), says of them: shading.

210 CARVING THE HUMAN FIGURE

 l^fc .' Ny X ~*^^fl

VII. ^^
Figs. 382-389. The Stations of the Cross, designed and executed by Eleanor Bruegel of Broomall,
Pennsylvania, at the suggestion of Mons. Richard J. Simons, pastor of St. Anastasia Church, Newtown
Square, Pa.

HANDS 211
Figs. 390-395. Stations of the Cross (continued). The stations are I. Jesus before Pilate, who washes his
hands. II. Jesus takes up the Cross. III. Jesus falls for the first time. IV. Jesus meets His Mother. V. Jesus
helped by Simon of Cyrene. VI. Veronica wipes Jesus' face. VII. Jesus falls a second time. VIII. Jesus meets
the women of Jerusalem. IX. Jesus falls a third time. X. Jesus stripped of His garments. XI. Jesus nailed to
the Cross. XII. Jesus dies on the Cross. XIII. Jesus taken down from the Cross. XIV. Jesus laid in the tomb.

212 CARVING THE HUMAN FIGURE

Humans stylized
Stylizing the human figure can take
many forms beyond the shift from realism
to some single or "accepted" treatment that
the word may seem to suggest. Thus a styl-
ized figure can become symbolic, near-ab-
stract or so formalized that the connection
with the human figure is almost indiscerni-
ble. Compare the three figures by T. E.
Haag, for example. The low-relief panel of
the running girl (Fig. 397) is almost realistic,
except for omission of detail in face and
feet, while the standing figure (Fig. 398) is
recognizable only by the lines of hair and
buttocks in a general human outline. Fig.
396 has a human face and general, blocky
human shape, but otherwise is a geometric
design. Fig. 397.
My effort here is to point out that styliz-
ing not a rigid thing, but a broad spec-
is Fig. 398.

trum of possibilities. The only requirement

is that the changes from realism be based on

a style or form that attracts the eye. Simple

distortion of a figure is not stylizing; there
must be a discernible plan or reason, or the
work itself will simply be crude.

Figs. 396-398. These three

stylizations by T. E. Haag show a
wide range of stylization. The
figure of the girl (above) merely
omits details in face, feet and
musculature, and possibly extends
the legs to attain flow. The pedestal
figure (right), on the other hand,
suggests the curves of the human
body and uses the hairline and
buttocks as part of the design, but
is otherwise barely recognizable.
The third figure has a human face
and shape that suggests a blocky
male, but is otherwise composed
largely of geometric designs.

Fig. 396.

HUMANS STYLIZED 213

Fig. 399.

Her work has been widely copied by oth-

Children can be angels ers—including me—but the copies, as
Ruth Hawkins is a very modest, unassum- usual, lose a little of thepiquancy and dash
ing mountain carver who sells her work Ruth is
of the original. not concerned about
through the Campbell Folk School at Brass- one admirer asserts, "If she knew
copies; as
town, North Carolina. Many other carvers you were copying one of her figures, she'd
do the same thing, but most of them follow probably offer to help."
patterns provided by the school; she fol- I have attempted to sketch about half of

lows her own, which are unique both in her designs, and have pictured some that I
design and technique. All of her designs copied as well as two of her originals. When
are children or child angels. All are whittled I finish this, I'm going to try again (I just

3
(she uses only a knife) from holly Vs to /i6 in haven't quite gotten the faces right, to say
(3.2 to 4.7 mm) thick. And all are low relief, nothing of the hair and hands). And I hope
meticulously detailed in contrast to the someday to get my hands on one design
usual Campbell in-the-round figures. They that is totally unique —a satanic
imp in little

are in theory Christmas-tree silhouette or- mahogany or some other dark wood, which
naments, but are usually snapped up by I suspect Ruth carved once when her own

collectors for year-round display. kids were belying her images of them!

Fig. 400.

214 CARVING THE HUMAN FIGURE

Fig. 401 (above). Eight copies ofRuth Hawkins' figures by the author, whittled from Vs-in (3.2-mm) holly
and finished by waxing. Surfaces are thinned and contoured behind faces, hands and so on to avoid a
"thick" look. Fig. 400 (opposite page). Ruth Hawkins carved the light and winsome figures at upper right
and lower left; I carved the comparatively crude copy at upper left, a student the one at lower right.

CHILDREN CAN BE ANGELS 215

 Portraits

Portraits are probably the most exacting bottom — all three are defects that cannot be
task for a carver, particularly self-portraits, corrected. His modelling around the
because we don't see ourselves as "others mouth and chin is very good, and the slight
see us," to quote Robert Burns. The expres- conventionalizing of the ears is also good. I

sion we get, even if taken from a pho- would have softened the eyelids and bulges
tograph, may not be the one that our below the eyes with wrinkle lines and dril-
friends see most often, and our view of led shallow holes to suggest pupil and iris.
ourselves is always a mirror image, hence When the face form is generally correct,
reversed. the liningand texturing can be done. Note
The self-portrait pictured here (Figs. 405, that Mr. Minton has achieved a facial tex-
406) is particularly interesting to me be- ture that is smooth, yet still shows tool
cause it is the first attempt at a likeness of a lines, a very suitable treatment. The
person by the carver, Hugh C. Minton, Jr., wrinkles from the nostrils are also well han-
of Aiken, South Carolina. It is in buckeye dled, but the crow's-feet near the eyes are
(somewhat like basswood in reaction to too wide, hence too prominent. This is

tools) and is a miniature, the blank being

Fig. 402.
only 3 x 3 x 5 in (7.5 x 7.5 x 12.5 cm).
Height of the head from chin to top is only 3
in (7.5 cm). It was done with only knives
and palm tools. No sandpaper was used
before finishing with Deft®. The self-por-
trait was made from same-size photo-

graphic prints as a pattern, as shown (Figs.

402-404), and no templates or preliminary
claymodelling were used. It is a better like-
ness than the photographs suggest.
In achieving such a likeness, the first step
is to get the general silhouette, working
from the side and front views. Then the
head is rounded and modelling is begun by
shaping around the nose, then the mouth
and eyes. A great deal of attention must be
paid to the exact shape of the nose and how
it joins the rest of the face. Mr. Minton got

the bridge of the nose a bit too thin and the

angle between cheek and nose is too acute.
Also, the nostrils are a bit small, top to

216 PORTRAITS
Figs. 405, 406.The finished self-portrait, undeniably a wood carving. Eye treatment would be enhanced by
delineating pupils and iris and softening the upper-lid line, but facial contours in general capture the
subject's personality and make the bust easily recognizable.

Fig. 403. Fig. 404.

Figs. 402-404. —
Three photos of the subject both sides and dead front. Photos need to be enlarged or
reduced to the exact size of the planned carving to provide precise guidance. Note hairline, crow's feet at
—
eye corners, Adam's apple, deep lines at sides of nose and mouth and deep-sunken eyes all distinctive
featural elements.

PORTRAITS 217
most important, because overemphasized Because of perspective and possible
wrinkles convert a portrait into a caricature shifts in pose, such as a lowering or
slight
if one isn't careful. In addition, many raising of the mallet, the patterns should be
carvers make the mistake of cutting away aligned, compared and adjusted before
the eyebrows and the usual bulge beneath being traced on the wood.
them. Mr. Minton has handled them and If you are starting with a
squared-up
the center of the brow very well, not lacing block, the views may be transferred with
the forehead with worry lines as so many carbon paper; but if you start, as I did, with
carvers do. The hairline is suggested but a log, it is necessary first to produce
not emphasized; I would have softened it squared surfaces at the top and on three
still more by texturing along the edges. I sides, at least (for the area of the carving
would also have textured the eyebrows only), so that the pattern can be traced. It is

slightly, so the treatment of moustache, also advisable to square up the base at this
eyebrows and hair would be similar. point, so it can be used as a starting point
The flow of the neck into the base is quite for measurement; the top will
vertical
smooth, and the base itself is relieved in promptly be cut up. Squaring up will also
front, then chamfered geometrically, thus reveal checks and flaws that may interfere
contrasting with the rounded contours of with the carving. Small cracks can be rein-
the head. forced immediately with thinned glue (like
Elmer's®, half and half with water), so they
The self-made man won't cause breaks during roughing out.
A woodcarving of a carver is quite rare. I Also, as you rough, any cracks revealed
recallonly two among the thousands of should be glued and/or filled before they
designs I've seen. This is surprising, be- cause trouble.
cause the carver can be his own model and As usual, carving should begin at the top,
the material is a natural. Thus, I decided to with the base used for holding the piece.
make Self-Made Man from a section of 6-in (On this particular log, the spongy growth-
(15.2-cm) walnut log and to follow the wood made clamping in a woodworking
methods used by such eminent painters as vise quite simple and flexible.) Waste wood
Maxfield Parrish, Norman Rockwell and can be cut away around the head and the
Andy Warhol: I took photographs from mallet of the figure with a crosscut saw and
three sides to provide patterns. Further, I flat chisel, then the back and far side are

decided to add a fillip: I'd have me carving shaped.

myself, with some of the log remaining to This work can be expedited by copying
show the source. the drawing on heavy paper or cardboard
The first step is photographs.
to take the and cutting out templates for front and
When the pose is selected, the photogra- side; I actually made my original sketches
pher should focus on a level with the center on heavy stock (Figs. 409, 410) and, using
of the subject and squarely to one side; this these as templates, roughed the silhouettes
reduces distortion. Pictures from the front with a coping saw. Mr. Minton (see above)
and other side should be taken at the same did not; he sculptured from the block with
focus. Then the negatives or transparencies only the tools. In the latter case, it is impor-
can be projected on paper at the desired tant to check dimensions frequently with a
size, and the pattern traced. (It is also possi- scale or calipers, and to stand off and look
ble to make photographic enlargements or the head over from all angles regularly as
reductions to the desired size, but there is you progress.
usually a little distortion that makes tracing Cut out the upper portion of the front,
and adjustment of the various views neces- between the arm and head, and shape the
sary anyway.) head and the mallet for reference points for

218 PORTRAITS
 Fig. 407. Fig. 408.

Fig. 409. Fig. 410.

Figs. 407, 408. Two of the three photos taken 90° apart that
were the basis for the pattern. The
photo without sleeves was show forearm musculature. The finished pattern is also the source
to
of front and side working patterns. The templates (Figs. 409, 410) can be cut from light but sturdy
cardboard or plastic.

PORTRAITS 219
 Fig. 411. Fig. 412.

Fig. 413. Fig. 414.

Figs. 411-414. First cuts aremade at the top with hand saw and heavy chisels to clear the head and
right arm; then the open area under the arm is roughed out. Removal of the waste wood between
the arms is the next step, followed by a rough-shaping of the figure. The finished work is shown
below right.

220 PORTRAITS
the rest of the carving. The body and arms makes carving of the face easier, but does
can then be shaped. In carving the arms, be add an element that is foreign and may
certain you retain proper lengths and pro- cause dusting troubles later. If your figure is
portions for the forearm and upper arm; to include a cigar, the mouth and left cheek

obviously the carving will be more lifelike if must be slightly distorted for it. The cigar

the two arms match in actual length and the should be made separately and inserted in
fists are the same size. Legs can also be a drilled hole; otherwise it is across grain
rough-shaped at this point, and final deci- and will cause both carving and mainte-
sions made about how much of the carver's nance difficulties.
body is to project from the log. I chose to experiment with a different

At this point, I got my nerve up to try the method of depicting hair, because mine is
difficult portions of the carving —the right cut quite short and the usual veiner lines
hand and the head, really the face—be- would suggest I put a thin
greater length.
cause if these two are not well done, the rest layer of Elmer's glue in the major hair areas
of the carving won't matter. and sifted walnut sawdust on top of it until
The hand is less important, but
left no more would stick. Then I added glue
should be done next. This hand grips the and more dust where needed. It worked
chisel, which must be straight when out quite realistically, taking a slightly
viewed from its side, so it is essential to darker tone when finished!
position the chisel on the leg and in the A friend who, like several observers,
hand before the hand is finally shaped, oth- missed the fact that the carver is carving
erwise you may have insufficient finger himself, suggested the extension of the
thickness on one side or the other. Also, it is right leg. This was a happy thought, be-
difficult to produce a believable chip at the cause it not only suggests that the figure is

chisel end, particularly if the chisel is cut- emerging from the log but also breaks the
ting at a slant into the grain, as it is in this rigid line of the log edge. This edge can
pose. Further, the head must be tilted so show chisel marks all around if you prefer; I
that the eyes are watching, or appear to be showed them in front only, where he is
watching, the cutting edge of the chisel —so obviously working, leaving the back of the
chisel shape and position are quite impor- figure quite rough in shape. (After all, how
tant. (Ifound it necessary to vary a bit from would he reach his back with the tools?)
my sketch at this point; you may, as well.) Finish was several coats of spray matte
Remember that, as you carve, you must varnish (satin) followed by two coats of
leave wood for such things as the collar on wax. I had originally intended to remove
the shirt, the eyeglasses and the hair, un- the growth wood as a final operation, but
less you plan to add them later. Shape the decided to leave it, complete with nicks and
shirt and legs, using the photographs to wormholes, to strengthen the impression
locate the wrinkles in their proper places. of a figure emerging from a log. As you
Finish the face, carving the glasses in probably know, the lighter growth-wood
place and the hair (such as it is). The darkens when varnish is applied, so it is not
glasses, if you wear them, can be made disconcertingly light in the piece.
separately from wire and installed; this

PORTRAITS 221
 16

Why Not Carve a Mask?

A man's face is much more than his for- such emotions as rage, fear, disdain, hap-
tune; it is the best visible clue to who and piness, and devotion. Slight errors usually
what he and the focus of every other
is, don't matter on a mask; they may even
man's (and woman's) eye. Thus, it is not all help. Proportions are usually not exact; the
surprising that we ascribe certain charac- real challenge is to cut loose from diffident
teristics to certain faces, identify famous or scraping into bold, strong cuts and lines, so
infamous personages by real or fancied fa- shadows can do their work. Further, most
cial characterics, or imagine specific faces masks cover only the front of the face, so
for our particular idols and gods. there is no problem with locating ears,
African masks that come from a broad shaping the head, or even depicting hair.
band across the center of the continent are The primitive wearer uses his own ears or
perhaps the best known in the United covers the head and ears with a cloth or
States, as a result of tourist and decorator other drape, headdress, or wig.
purchases. These include the most elabo- Eyes, on the other hand, are often very
rate abstract ones, but strikingly unusual on masks— reflecting mv initial re-
detailed
masks of a similar type are also carved in marks about how other people always
Perhaps the finest and truest-to-life
Haiti. watch the face (and particularly the eyes) as
masks were the more than 100 designs of a clue towhat we are thinking. The mask
the Japanese Noh masks. Because of our wearer may see through slits or holes in the
mixed heritage, most Americans now think mask eyes or, if the shape is different,
of masks only as something associated with through slits cut in convenient areas. Be-
children and Halloween. cause a mask tends to be slightly larger than
All sorts of materials have been used for the face to allow for wall thickness, holes or
masks but wood was and is the "old reli- slits in the irises of the mask eyes will be
able." It is strong, relatively permanent, misplaced, so actual viewing slits may be
light and stable, takes detail and finishes cut in the crease beneath the lower lid or,

well, and is not abrasive on the face if well more commonly, in the crease between eye-
finished inside. The usual woods are brow and eye. Also, nostrils are pierced to
straight-grained and relatively soft, like our make breathing within the mask a bit easier.
white pine and basswood, and even balsa In the case of grotesques or animal masks,
and ash. placing sight holes may be extremely
It is strange that so few American carvers difficult.
have made masks, because they provide Because a mask is often a caricature, sides
excellent training in face carving, par- do not have to balance; eyes and cheeks can
ticularly caricature. Furthermore, if they are be higher or lower, the mouth can be
not copies, they require the carver to study —
twisted things that would not be done in a
features and expressions, so he can depict formal portrait. Also, because a great many

222 WHY NOT CARVE A MASK?

masks are painted, slight miscuts or flaws
can be corrected with gesso, plastic wood,
or whatever. The primary need is to make
bold, slashing cuts, even if they are slightly
wrong, rather than to spend an eternity
nibbling away to copy precisely some for-
mal original. The masks shown here were
selected largely with that idea in mind.
Figs. 415, 416 (top left and above). Two versions of a
demon mask, from Mexico. Mask top lefthas
Whether or not a mask is to be worn, it articulated jaw, while the one above is about 18 in
should be hollowed out. This not only per- (46cm) high and extends down over wearer's chest.
Both have viewing slits between eye bulge and
mits piercing of the eyes, nose and mouth,
brow.
but is also makes the mask much lighter

and less prone to checking and warping.

The hollowing is best done after rough-
carving of the features; the mass of wood
inside provides a convenient means of an-
choring the mask during roughing, and the
rough outside shaping later provides a con-
venient guide for obtaining fairly uniform
wall thickness. Hollowing is done with
fairlylarge gouges, working alternately
from top and bottom with the grain. It is
advisable to hollow inside the nose, even if
the mask is not to be worn, and to follow
the cheek and brow contours to a degree.
Generally speaking, mask-making is a
gouge or adze job, not a knife job, the adze
having a gouge-shaped blade for the

Fig. 417 (right). Some masks are realistic. This one

is the face of Benito Juarez, a hero to all Mexicans.
It was made near Oaxaca and is neither painted nor

tinted. It is of balsa!

MASKS 223
 JAPANLSE NOH MASK
(Old priest, with movable jaw)
(This is a larq«r-than- life sue. If it is to be worn, r«duce scale)

roughing work in particular. Lines of the Noh masks—yes!

face, beard, tattoo marks, and hollowed The Japanese are reputedly the most ac-
areas are difficult with just the knife. Grain complished makers of masks in the world,
normally runs with the line of the nose, and and the Noh mask is considered their
complex elements which project very far, finest.Thus, when I learned that a book
such as horns, a pointed nose or chin, or had been published on how to make a half-
ears on animal masks, are carved separately dozen different types of Noh mask, I sent to
and added, for both economy in wood and Japan for a copy. This particular mask of an
strength. old priest (Fig. 419) intrigued me most in
If wood is not
equivalent to a half-log the book, so I decided to make it.

available, theblank can be built up in lami- Step-by-step photographs and diagrams

nated layers. This also reduces wood cost were plentiful in the book, and the basic
and hollowing labor. Laminations cause no dimensions were provided. The text was, of
problems in a mask which is to be painted course, in Japanese, and it turned out that
anyway. With modern 2-in (5-cm) planks, a the dimensions given were neither in En-
simple way to gain thickness is to glue on a glish nor metric, but in some sort of ratio.

rough-formed nose blank, as well as brows As went along, I also found

I that two dif-
and a chin tip if it suits the design. ferent masks had been used for the pho-

224 WHY NOT CARVE A MASK?

 tographs, and they differed slightly in
wrinkles and decoration. I discovered then
that Confucius' remark about one picture
being worth a thousand words is not liter-
ally true; there were times, in fact, when I'd
have settled for the reverse.
This particular mask is normally made of
a soft wood and finished with a glossy coat
of off-white enamel, with tinting around
the mouth and cheeks. I decided instead to
make mine of myrtle and leave the natural
finish. I also wanted it to fit me. I had half of
an 8V2-in (21-cm) log, which was thus 4 /4 in !

(11 cm) at the center. Rough measurements

of my face indicated that I needed a width of

7% in (19.7 cm) and a depth of 3 3/4 in (9.5
cm), allowing for '/2-in (12.7-mm) walls. I
decided to leave the additional width and
depth and simply hollow the mask a bit
deeper. The log half was also a bit longer
than the original, but one does not waste
myrtle, so I added to the forehead.
None of these enlargements caused trou-
ble,but I did find that when got to the
I

hollowing, I could have decreased the

width by VA in (3 cm), even for my wide
face, with other dimensions correspond-
ingly smaller. Therefore, I've put no dimen-
Fig. 419. Old priest, a wearable Japanese Noh mask
in myrtle, with movable lower jaw. sions on my sketches; you can fit your own
face —remembering that you'll probably

Figs. 420 (left) and 421

(right). Japanese masks
illustrate the craftsmanship
of that country's mask
makers. Here are an old
man and a demon,
Obechima Note
(right). that
they extend back to the
ears. (Masks on this page courtesy
Metropolitan Museum of Art,
New York City.)

MASKS 225
overestimate as I did. If you photostat the
Step-by-step carving
outside dimensions to A
3
in (19 mm) or 1 in
Lay out a vertical centerline on both
(25 mm) wider than the width of your face at
front and back of the piece. Lay out the
the cheekbone level, you should come out all
basic mask shape on the flat back, using the
right. All templates and sketches must be in
template on both sides of the centerline.
proportion to the basic half-outline you use
Fig. 422 shows the layout, and how you can
first. (See Fig. 424 below.)
saw off the corners with a straight saw to

Fig. 422

226 WHY NOT CARVE A MASK?

 Fig. 426.

^^m

Fig. 425.

shorten the heavy chisel work. When con-

tour is achieved, cut off the outer edges of
the front of the piece,
block, so you have a
you started with a
rough
if

half-log shape.
Then lay out the cross lines for the low
1
1 r J
spots below the brow, the nose and the lips,
and begin to cut away the wood until you
have achieved almost the desired depth
(Fig. 423). Shape the face profile until the
along the centerline,
profile template fits
then re-establish the basic vertical cen-
terline (Fig. 424).
Begin to hollow around the eyes and
nose, leaving the eyeball and cheek at their *_J^H
original level (Fig. 425). Note that the nose
template goes across at the nostril line, and
that the wood is not cut away above the
Fig. 427.
nostrils nor at the outer edges. However,
the wood is cut away at the outer edges
beyond the lip template, which is almost an off the sides of the mouth and chin and
extended half-circle. It is also cut away out- locate the mouth template and draw
side the chin template. As you cut, refer to around it (Fig. 427).
the photograph showing the templates in At this stage, decided to rough-hollow
I

place (Fig. 426). At this point you can round the interior, using straight and short-bent

MASKS 227
 Fig. 428
(left).

Fig. 429
(right).

gouges. If you are holding the piece in a

vise, be sure to leave plenty of wood at the
outer edges to avoid breaking the side walls
of the mask. You can also locate the eye and
nostril positions and cut deeper at those
points to simplify the next steps and make
drilling and sawing easier (Fig. 428).
Now return to the face of the mask and
achieve a rough face shape by defining the
nostrils and shaping the eyeballs and
cheeks. When this is completed, lay out the
lines of the face and the eye slots according
to the face pattern (Fig. 418). The decorative
lines around the face are essentially V-slots,
but they may be finished in various ways,
according to what I could make out of the
Japanese book. They may be with
V-slots
the sides faired so the areas between have a
convex shape; they may simply be V-
grooves with sharp edges; or one side of the
V-groove may be eased or faired so they
Fig. 430.
become the equivalent of teeth on a ratchet.
This is what I did, starting at the center of railroad yard; study the full-face sketch
the brow and on the lower edge of the carefully beforeyou work on this area. The
groove (which becomes the upper edge at two short wrinkles at the center of the brow,
the sides of the eyes). Where the grooves by the way, are better as simple V-grooves,
meet at the sides of the eyes is roughly deep at the center and fading away to
equivalent to switches in an old-fashioned nothing as they move outward (Fig. 430).

228 WHY NOT CARVE A MASK?

 Fig. 431.

It is also possible, at this point, to cut the

lower jaw free. This is done with a scroll
saw, and the cut is at right angles to the
plane of the mask. Note that the cut enters
at the points of the mouth outline, but
passes above center to provide a fuller
lower lip. This can be seen clearly in the side
view of the mask (Fig. 431). Note also in this
view how the cheeks and brows are faired
into the lines, the chin shape, and the three
decorative V-grooves on each side of the
jaw.
Now complete the shaping of the
nostrils, cheeks, and eyes. Drill and saw
out the eye slots and make any adjustments
necessary at the back to thin the wood be-
hind eyes and nostril holes. Note that there
is groove on the upper eyelid that
a fine
suggests lashes, and a shallow groove over
each eye near the bridge of the nose to
accentuate the Oriental eye. (This is not
sketched, to reduce complexity.) The eye-
Fig. 432.
ball shape is also strongly accented by
grooves at top and bottom that flow into the which no human ever has, flanked by two
wrinkle rings at the sides. upper teeth, all quite wide. These are
It is also possible now shape the lips
to shown clearly on the back and bottom pho-
and teeth, the latter from the wood behind tos of the sequence (Figs. 433, 434). The
the lips (Fig. 432). For some reason, the holes for the jaw ties and side fastening
priest has a single, centered lower tooth, may also be drilled at this point.

MASKS 229
 behind them. This can be made from a
toothpick or splinter of pine.
The rosettes at each side of the forehead
are about V/i in (4 cm) in diameter. They are
made from fibres of coarse cord or light
rope, sisal or hemp, sewn into a disc and
trimmed to shape. The disc should be quite
thick, so it bunches, and is simply tacked in
place. Coarse cord (I used a handmade
Mexican 3-strand cord) for the ties, and to
hold the jaws together, seems correct and
looks good. (If you hang the mask, tack the
support cords in place near the top, or the
mask may hang out at the top.)
Before these finishing steps, you may
want to round the mask at top and bottom
in back; it fits the face of the wearer better
that way and looks less rigid when hung.
Also, pressure on the back lower edge of
the chin forces the mouth closed. You will
also want to clean up the inside of the mask
and thin it down so it fits your face comfort-
ably. I finished simply with oil and wax, but
the proper Noh mask has a wax-like surface
Fig. 433.
produced by filler and several coats of a
thick paint-like enamel. Color is slightly
off-white all over, with a faint tinge of red
Essential work on the mask is now com-
around the lips.
plete, but it will need some cleaning up and
shaping, as well as decoration. The
—
moustache is painted on vertical stripes of
black —but the beard Three small
is real.

holes are drilled about % in (9.6 mm) deep

at the center base of the lower lip, and ten in
line below the point of the chin, to take the
beard hairs. The latter are set in a groove
about Vi6 in (1.6 mm) deep, which makes
alignment easier and will conceal peg ends
later.

Horsehair is a good beard material; I used

white hair from an old violin bow. Heavy
thread or nylon filament could also be
used, but I found 15 strands of horsehair
per hole just about right. Suit length to your
own fancy; I liked it about 9 in (22.5 cm)
long, with ragged lower ends (Fig. 419). If
you wet the ends of the horsehairs with a
plastic cement, they will cling together and
enter the hole quite easily There they are
anchored and spread with a driven-in plug Fig. 434.

230 WHY NOT CARVE A MASK?

 17

Relief Carving

For over fifty years, I have been fasci- show the tremendous range and pos-
nated by the infinite possibilities of relief sibilities in this form. Also included are the
carving, ranging from geometric patterns basics of wood, tools, sharpening and fin-

on and full-fledged scenes. A

to portraits ishing, as well as patterns and hints piece
relief carving need not be a flat, rectangular by piece.
panel; can be a silhouette with or without
it

pierced elements that allow light or the What wood is best?

background to show through in parts. It Generally speaking, the gamut of
can be wrapped around a non-planar shape woods has been used in relief carving,
such as a cylinder, a ball, a log or even a sometimes because a wood was readily
shape as irregular as a wooden shoe. It can available or easily carved, sometimes be-
incorporate inlays, utilize the grain or "fig- cause it was the right color, texture, pattern,
ure" of the wood, suggest a texture, be a had some significance or even rarity. Panels
simple study of a small subject or a complex in churches have usually been carved in
treatment of an involved one. It is almost as local woods such as walnut, pine,
flexible as in-the-round carving, since the basswood, maple, butternut, cherry and
third dimension can suit the wood and the apple in the United States; oak, lime,
subject, with the added advantage of let- linden, apple and deal (fir or pine) in Eu-
ting you hold elements together, provide a rope; and in Egypt, sycamore and cedar,
scene or background and protect the piece Panels carved for furniture have varied with
against undue wear or damage. It can be fashion. Cherry wasn't used until 1675, ma-
traditional ormodern, realistic or abstract, hogany didn't appear in Europe in any
even "inside-out" as an intaglio or a mould, quantity until 1720, and teak came into use
And itcan be painted or stained, but usu- much more recently.
ally does not need to be, thus retaining the In the United States, the familiar woods
natural warmth of the wood. In short, relief for relief carving are black walnut, ma-
carving can almost any story you want it
tell hogany, cherry and other fruit woods; for
to, from a mere feeling to the setting of an signs or painted outdoor units, basswood
entire scene, or even several scenes one and white pine are the usual choices. I have
within the other. carved all of these, as well as teak, butter-
Some of the sections of this book have nut, maple, pear, pecan, ash, vermilion,
contained relief carvings, but none have yet purpleheart, ebony and others. But for
been devoted expressly to relief itself. Here, practical purposes, including available
then, is a wide variety of relief-carved proj- sizes and ease of working, I prefer pine,
ects, graded and not repeated
for difficulty basswood, cherry, walnut and teak. Use
elsewhere. They include my own work and walnut, mahogany, cherry and teak for re-
thatof selected carvers around the world, to lief work not to be painted. For exterior

RELIEF CARVING 231

work, teak is superior because it does not years old in which the center of the back
rot or warp, and is not prone to insect attack. was hollowed appreciably to counteract
Many of the exotic woods suitable for warpage, just as old-time in-the-round fig-
veneering are hard to carve because they ures were split and hollowed out to avoid
split, have irregular grain or create other checking.
problems. The typical relief carving is a
panel. Thus, wood should be straight- Thin tools/speed setting-in
grained, so backgrounding and modelling Thin-bladed tools are better and more
can both be done well, without too much convenient to use on small panels. They
"figure," grain or knots, which compete make setting-in, particularly around
with the carving, and without too much curves, quicker and easier by reducing the
tendency to warp, splinter and split. It —
wedging action hence the crushing and
should also be dense enough to support splitting of fibres —
and the number of
detail, and preferably hard enough not to steps. And, small tools are less clumsy for
be worn away by cleaning and polishing intricate work. Such tools work just as well
through the years. as heavier chisels for grounding out, but are
The wood will some-
color of a particular not as safe for digging or prying which we—
times suggest itsyou plan to carve in
use. If shouldn't do anyway. Nor will they stand
a wood with which you have no experience, mallet pounding as well as the heavier chis-
try a sample before getting started on the els, though they can be used with a soft- or

general project. Depending upon your ex- plastic-faced mallet. They are lighter,
perience with a wood, you may want to cheaper and less fatiguing to hold, par-
simplify the proposed design, or alter the ticularly when compared to some Amer-
arrangement to put a knot or flaw in an ican tools, which are much too thick in
unimportant spot. smaller sizes.
For any larger panels these days, it is H. M. Sutter has recently found a com-
usually necessary to assemble the panel mercial company willing to make his style
from milled boards. On darker woods with- of tool, so beginner sets are now available.
out conspicuous grain walnut, —ma- Each consists of six tools: a firmer A in (6.4 l

—
hogany, teak the joining lines can be mm) wide, and gouges of Vu>-, Vs-, 3/ie-, A- l

made to disappear almost entirely. They and 5

/i6-in (1.6-, 3.2-, 5-, 6.4- and 8-mm)
must, however, have smooth-planed edges width, No. 7 sweep. The second set has
all

for good joints, and should preferably be No. 7 %- to %-in (9.5- to 16-mm) gouges and
dowelled, glued and clamped to assure a %-in (16-mm) firmer.
tightness. The wood should also be rela- He rounds off the heel on each gouge and
tively thick; Vi- and 1-in (13- and 25.4-mm) increases the length of the bevel on the
panels of pine, walnut and mahogany tend firmer to make true thin blades, which al-
to warp and move with the weather re- low for deeper cuts without crushing. He
gardless of finish. If you anticipate or en- also reports that such tools have made a
counter appreciable warpage, brace the considerable difference in the quality of the
back of the panel with screwed-on battens work done by his students, as well as the
across grain, or with angle irons or alumi- complexity they can handle. The pine-cone
num have used the latter in a
angles. I design was a real challenge, even for an
number of instances, even to assemble a advanced student, but can now be done
walnut mailbox of ^-in (13-mm) wood, with relative ease. The same is true for the
carved on surfaces and edges. It has held more difficult orchid design. Large curves
for ten years, completely exposed (with are cut with an all-purpose knife or with
marine-varnish finish). I have also seen larger chisels if they are available. Students
thick relief carvings a hundred or more have also found that this kind of tool is

232 RELIEF CARVING

 PANEL MTFERN5
Suited to "thin" tools

KM. Suiter

Figs. 435

by T.E.
Fig. 436 (right). Panel
Haag with textured background
which clarifies the silky
smoothness of the figure itself.

quite satisfactory for carving in-the-round as-j S*2 *S-3 *S>4 «5 F,r-meh
pieces.
Several of Mr. Sutter's patterns and fin-
X. X X. 'A' ?V 'Mr"

ished pieces are pictured here. My students

at Brasstown, North Carolina, usually
skilled as whittlers but newly introduced to
have done the designs shown there
chisels,
n nnq
Set*!!? 'Writs'*
nn
and here quite successfully.

Fig. 437 (right). Sutter's thin tools; and all-purpose

knife.

RELIEF CARVING 233

 and below). Three
Figs. 438, 439 (left
pine cones are a good subject
for thin-blade tools because of the
overlapping seeds. Such designs
should be trenched, with trenching
sloping up to the surface all around, so
needles can be cut into the surface
with a V-tool. A groove can replace a
raised rib here with no loss of realism.

234 RELIEF CARVING

 Figs. 440, 441 (aboveand left). This simple
head can be raised above a background,
trenched or silhouetted. Modelling is shallow
but precise; thus, the project is more difficult
than it appears to be. This is a good exercise in
using the V-tool.

——

Fig. 442.Head of a carousel horse is difficult to

carve accurately in relief because of its twist.
Although the eye is correctly positioned for in-
the-round carving, it appears high and too far
forward here.

RELIEF CARVING 235

 »

V'lPJJP "MM'

Figs. 443, 444(above and right). The rose is a

complex project requiring fairly deep grounding,
perhaps Yi in (13 mm) or more, to get petals well
shaped. Note random-cut gouge background.

Figs. 445, 446 (below and right). Most difficult of

the group is this double orchid, which requires
as much as V* in (19 mm) of grounding to achieve
the various levels and get the crenellations in the
petals.
Fig. 447. For this polyglot
pencil designs selected from
a textbook were sketched on
the wood to form a compact
group. When the depth of
the board was covered at one
end, grounding-out was
begun, followed by
modelling of individual
designs. Note that overlaps
are left undecided until
actual modelling is done,
and that carving is not
completely laid out and then
completely grounded, as the
texts instruct. It's more fun
this way!

Carve a polyglot panel

An overall panel normally involves elab- as lettuce heads and parsley, if you prefer,
orate tracery of foliage or a grouping to tie and pictures or the objects themselves are
the elements together. A polyglot panel, readily available. There are at least again as
however, requires nothing but step-by-step many fruits and vegetables as the 63 I

carving of single subjects; the only prob- used —such familiar ones as lemon, or-
lems are with making the elements ap- ange, honeydew melon, parsnip and celery
proach or overlay each other. It does not are not included.
require lengthy planning, sketching and Here, the client selected panel wood and
designing, because the design develops as shape. She liked the growth- wood color
you carve. (I design or draw only one set of contrast and the sloping bevelled edge that
subjects ahead of my carving.) You can resulted from the natural shape of the tree.
trace or otherwise copy all the elements Wood is black walnut, 1 x 7 3A x 16 5/s in
without change of scale, providing there (2.54 x 20 x 42 cm) which is not par-
are enough potential subjects in the theme ticularly inclined to split, able to support
you select. And your selection of subjects considerable detail, and finishes well.
and theme will also determine the level of My source for almost all of the 63 designs
difficulty you encounter. Further, this kind was a handbook of fruits and vegetables
of carving provides a great deal of training from the local library. I altered scale in some
in grounding out, shaping forms, and in cases because a watermelon and peppers
texturing. The results are often unique. create rather sharp size contrasts, and I
In my first polyglot, I was immediately used sliced sections in others because the
faced with legs and antennae in profusion. whole fruit or vegetable would repeat a
Fortunately, scale was large. This fruit and shape and be monotonous. A peach, a
vegetable panel (Fig. 447) is an easier way to plum, and an apricot are basically alike ex-
start. The individual designs are familiar to —
cept for color and color is not available in a
allof us, with many distinctive shapes. You panel like this unless you use a light wood
can avoid difficult forms or texturing, such and tint it. Also, the interior of some fruits

RELIEF CARVING 237

 Fig. 448. Black walnut, 1 x 73/4 x 16 5/s in (2.54 x 20 x 42 cm), was cut across the tree so there is
growth wood along both edges. It was selected as the basis for this polyglot fruit-and-vegetable
panel, which depicts 63 varieties. The rounded contour of the tree perimeter was originally
planned to be left in its inner-bark, dark-brown condition. However, condiments were drawn
there and whittled out with a penknife, through the bark into the growth wood beneath, into a
sort of reversed scrimshaw.

is much more interesting than the exterior All through the panel, I overlapped
from a design standpoint. drawings of subjects, and then decided
It unnecessary to lower the back-
is which was to appear above the other when I
ground more than about Vs in (3.2 mm) in a was carving. In most instances, this deci-
small panel of this type. You don't have to sion is surprisingly easy because one sub-
undercut, either. There can be a border or ject has the overlap portion near the sur-
frame if you wish, the entire panel can be face, while the other will curve away. The
trenched, or the edges cut away. I trenched principal problem is to keep the back-
at the sides because of the squared edges, ground areas small and irregularly shaped,
and cut the border away at the top. Initially, and to select subjects of contrasting shape
I had planned to leave pristine the irregular and texture to go side by side. With a whole
top edge created by the natural curvature of guide to pick from, that task is easy.
the tree, but I ultimately put condiments Tools required can be few and simple. I
—parsley, pepper,
there dill and cin- used a hook or pull knife, a V-tool, two
namon—and carved them in intaglio to veiners (one very small), Vs-in (3.2-mm)
leave the dark grooved surface and add to and Vi-in (3.2- and 6.4-mm) flat
firmer, Vs-
the contrast with the rest of the panel. gouges, and a i4-in (6.4-mm) half-round
One virtue of this sort of design is that gouge. Larger half-round or semi-half-
you can make such alterations as they occur round gouges could be used to form
to you. It is not even necessary to balance rounded shapes like those of currants,
the two sides of the panel unless you wish grapes and cranberries, but I shaped them
to do so. I created a rough balance by put- with a hook knife and left them slightly
ting the head lettuce on one side and the irregular. (A pro would use the gouge of
cauliflower on the other, and balancing the proper size and shape to speed the work.)
long diagonal line of the sugar beet at one Practically all of the setting-in was done
top corner with that of the asparagus at the with the Vs-'m (3.2-mm) firmer, and ground-
other. The fairly large and complex bunch ing with the same tool in two steps: one
of grapes was placed near the center to roughing, one finishing. A light mallet con-
dominate the composition. trolled depth of setting-in and roughing,

238 RELIEF CARVING

 —

while smoothing the ground was done by

hand. When setting in, allow at least Vi in
(6.4 mm) of solid wood in a filament such as
a root, or to slope the tool away. If a section
is to be narrower than that, it should be

roughed wider, then shaved in finishing,

particularly across grain. Very small and
delicate filaments such as stems are best cut
with the knife. Then, splitting and shatter-
ing of thin filaments won't be too much of a
problem. Background need not be entirely
smooth, but corners should be cleaned out
as you go, so the finished work is crisp.

Texturing is largely a matter of V-tool and

veiner work, either as lines or scallops.
Heavy shaping can be done with the chis-
els, fine shaping with the knife. I found that

—
a pocketknife my favorite tool— was un-
necessary. Except for veining, designs on
the bevelled edge were carved in intaglio
entirely with the knife. The peppercorn
shapes were "drilled" by rotating a Vs-in
(3.2-mm) half-round gouge. It is important
in such work to avoid destroying the edge
Fig. 449. Small oak picture frame from Italy shows
of the carving, which removes the patina floridand deep-relief formal style of the past
or in this case, the dark veined surface. century. It combines several motifs and is made to
appear even heavier with black stain.
Finish was two coats of sprayed matte
varnish to seal the surface, followed by a
coat of walnut color Minwax®,
special makes the carving appear deeper and sets
brushed and wiped off the surfaces in the
in off the designs.Sandpaper was not used,
dark areas, and carefully painted into the except for a worn piece of very-fine grade
background and lines in the light areas to rubbed over the top surfaces before var-
avoid darkening them. This "antiquing" nishing to add a little gloss.

Fig. 450. Detailfrom a jflfiutp ' J\ I

massive door in the
Cathedral of Seville
exemplifies high-
relief style of former \jS\ Hi
centuries.Note that female
figures and floral swags
between them are practically
in-the-round.

1 |H JH pipl
RELIEF CARVING 239
>

High relief, bas-relief,

mezzo-relievo and intaglio
Relief carving was classified by the Ital-
ians: High relief or alto-relievo carries projec-
tion from the background to half or more of
the natural thickness of the subject. Some
parts may be undercut or completely free of
the background. In low relief, basso-relievo

or bas-relief, the projection isand no

slight
parts are undercut or detached. Less com-
monly defined are half relief (mezzo-relievo)
and the very flat relief of medals and coins
called stiacciato. Hollow relief, also called
cavo-relievo, intaglio-relevato, coelanglyphic
sculpture or simply trench carving, is that
in which the background is not cut away;
the figure or object being carved is outlined
by a deep groove but has no elements
higher than the background. This tech-
nique is effective for coats of arms, mono-
grams, initials, lettering and other carving
on a flat surface, particularly if it may be

Figs. 451, 452 (above and

right). Nereid (water
fairy) follows the
curvature of the log.
Effect is similar to that of
appliqueing a figure on a
contrasting background, Fig. 453.Another piece by T. E. Haag
except that the carving is of Tualatin,Oregon, in which a
integral and less textured background clarifies the silky
contrived in appearance. smoothness of the figure itself.
Color contrast between
heart and growth wood
creates acameo effect.
(See page 241).

240 RELIEF CARVING

 Figs.454-456 (above and below). Araucano and Araucana (male and female) busts in mahogany-
wood are modern high-relief silhouettes carved in Chile, where woodcarving is
like rauli
infrequent (possibly because of wood scarcity). Heads and chests are correct in the third
dimension, while back halves of bodies are flattened. Each is about 6 in (15 cm) tall.

ARAUCANA
Chile
Raul wood
i

Fig. 455. Fig. 456.

damaged by bumping or abrasion. This is are cookie and butter moulds. When a pat-
not to be confused with intaglio, which is tern is pressed into sand to create a mould
most easily described as reversed relief. for metal, the mould itself is an intaglio.
In intaglio carving, the design is hol- This is not a cameo, which is normally lim-
lowed out so that material pressed or ited to a head or bust carved in multilayered
poured into it comes out as an image in stone or shell so that the carving is in one

relief. The most familiar objects in intaglio color, the background in another. However,

RELIEF CARVING 241

 Fig. 457. Relief carving need not be on a
planar surface. This is a willow-wood shoe
from the Netherlands that I carved in
polyglot fashion. Motifs pictured are familiar
children's toys.

a head or bust carved through a surface foreground figures cut free of the back-
layer of one color into a differing color be- ground; they may be in the round them-
neath, so that not only color change but selves but are still part of a relief carving.
reversal of the depths is attained, is an in- I have done relief carving on trees, bowls,

taglio and a cameo. napkin rings and even on wooden shoes.

A figure becomes in the round only when These are, in a sense, three-dimensional, as
the third dimension is correct. A dog or is a mobile made up of relief silhouettes. It

horse carved in silhouette but flattened in is possible to have two relief carvings on

body thickness is still relief carving, as is opposite sides of the same silhouetted
pierced carving, regardless of whether it piece of wood, with either the same or dif-
contains in-the-round elements. The same ferent subjects. It is also possible to inlay
is true of high relief, which often contains relief carvings, particularly very shallowly

Jkwd
OPERATING
LINKAGES
Low*r-j«w \tvtn to-

tdtc ryt rollers of

dowal rod

\J
Ll
™
WING

Liver reverses
movement & jm-
TONGUE

plifieVit 2:1

Fig. 458. Northwest Coast Indians are skilled at relief carving on totem poles.

242 RELIEF CARVING

 f

Figs. 459, 460. Articulated totem pole 17 in (43.2 cm) high and "sleeps" normally (left), but eagle's
wings can lift and alleyes and mouths open when a back lever is moved (right). The miniature
pole is basswood, a quarter of a log, painted with oils.

carved ones, with metal, stone, plastic or

shell, or with other woods. Some peoples
particularly skilled at relief carving, like the
Figs. 461, 462. Making a small totem pole. Step 1
New Zealand Maori and American North- (below Block out the eagle with a saw. The
left).

west Coast Indians, inlay many of their core of the log is towards the front, thus providing a
natural shape for beaks. Step 2 (below right). Eagle
carvings with shell as a matter of custom.
is blocked out with wing stubs instead of wings.
So do some furniture makers, particularly —
Raven shape has been drawn below it the eagle
in France. will stand on the raven's head.

Fig. 461
(left).

Fig. 462
(right).

A TOTEM POLE 243

 —

Fig. 463. Step 3. Raven

and bear are largely
shaped, eyes have been
located and raven wings
defined. This is done
with chisels and mallet
it's faster. Fig. 464 (right).
Step Eye holes are
4.
drilled in, claws and
mouths defined, and
shaping mostly done.

Fig. 464.

Fig. 463.

Fig. 465.

Fig. 465.Step 5 (above left). A deep slot sawed and

chiselled out in the back will accommodate the
levers and operating bars as well as make it
possible to hollow heads for the eye rollers shown
with it here. Fig. 466. Step 6 (right).Lower jaws are
cut away and slots cut through to meet the ones in
back. Also, slots are cut through the extended
shoulders of the eagle so the wings can be fitted in.

244 RELIEF CARVING

 Fig. 467. Step 7. At top
are the cutaway sections
of lower jaw which serve
as patterns for their
replacements (below)
which have levers. Note
wing shape.

Fig. 468. Step 8.Eye roller and jaw

elements are fitted individually, with brads
used as axles. Also, thin sections of wood
are formed into tongues held loosely in the
mouth roofs by tacks, so they will drop
when the mouths open.

Fig. 469. Step 9.Now a vertical bar is set in place to

tiethe operating mechanism together. Levers may
—
be pinned or wired to it see Fig. 458.

A TOTEM POLE 245

Fig. 470. Step 10. Work with the motion to
free up and get maximum stroke, so
it

eyes roll and mouths open as far as

possible. When all are operating freely,
saw and
off the axle brads (in a vise)
insert them securely flush with the
surface. Mount the assembly on a
—
stabilizing base and you are ready for
painting.

Fig. 471. Standard totem pole is a series of in-the-round

—
animals one atop another like this one in a Vancouver,
British Columbia, Park. Some, however, may be high relief
with no back carving (note that this one is backed by a pine
tree).

246 RELIEF CARVING

Fig. 472. Patterns for miniature totem poles pictures in Fig. 473
(right).Miniature totem poles such as these are primarily tourist
items, through they may be faithful copies. The left one is about
12 in (30 cm) tall and painted, and shows two birds sandwiching
a human figure. Totem pole at right is about 6 in (15 cm) tall and Fig. 473.
unpainted. A shaman is atop a frog atop a beaver; it is
particularly interesting because it is carved in black cottonwood
bark rather than the usual cedar.

A TOTEM POLE 247

 &mT wiThe

Dual h«ad (.*«al «m<caing

ftem shamap'i mouth) uin
low rslnf 4n<j vjhi+«,4»4r«
fuh & b'«*4,di'mi,«tc Hinds
Ktvt rod * nq<fi Gracn band
Dtlownoic{ iido of ictl fjc« R#4
outlm«i onfto'Ki«5,«fC- «5 Itctnfy1

SHAMAN'S DANCE MASK (Aia.ka)

< +v
lat« l 3 '
Century Painted, qrcen, '«d & whitt

Figs. 474, 475 (above and left). I made this tinted

miniature of a shaman's dance mask from the

The original
late 19th century. was so elaborate
that was probably carried rather than worn. It
it

depicted animals and was used to assure success

in the hunt.

Figs. 476, 477. A traditional Northwest Indian this aremade there by Ainu carvers for less than
carving is thisblack bear with a salmon in its they could be made in Alaska. Design can be
mouth. Now imported from Japan, bears like either in-the-round or relief.

248 RELIEF CARVING

 GREASfcOlL BOWLHAIDA

Rear- Wir?< abalone inserts

Figs. 478, 479 (above and left). The Haida were

noted for carvings with abalone inserts. This
modern one, by an Indian woman, is about a foot
(30 cm) long and is an oil or grease bowl in which—
a wick burning in whale oil provides a house with
light and some heat.

Fig. 479.

Figs. 480, 481 (above and right). This miniature of a Tlingit oil bowl was made by J. O. Rowan of Ketchikan,
Alaska. It is a sea otter on its back, with paint spots replacing the shell inserts used on full-sized carvings.
Stylizing makes it practically a shaped panel.

NORTHWEST INDIAN CARVINGS 249

 Most modern relief carving is low relief
and made in relatively small pieces ex-
hibited at or near eye level. Low-relief carv-
ing, however, is particularly susceptible to
light intensityand direction, so such work
as apediment high above eye level or a boat
counter well below may require special cor-
rection. Also, the third dimension in any
relief carving is not simply a flattened ver-
sion of the actual or in-the-round dimen-
sion — it often must incorporate a difference
in shape. A rounded surface may have to be
carved somewhat angular to produce an
edge that creates a difference in light reflec-
tion. A given line may have to be shorter or
longer than a matching one on the opposite
side of center, since elements that would
normally be at different depths must be at
WASGOo, hONSTER about the same depth. Thus, differentials
C»nb« parv«l or in-tht- round T\o ure
| must be optical.
Fig. 482.
Effects must be created by texturing, by
making a simple groove different on either
side, by flattening or even gouging a sur-
face and even by tinting and "antiquing"
(my own word for darkening deeper lines
and areas). Tinting or painting on relief
carvings, however, is not done nearly as
often as it is on the in-the-round figures,
possibly because the latter are often the
adult equivalent of toys while relief carv-
ings are more nearly decoration.

Fig. 485.

Fig. 483.
CHARMS
Eskimo or Indan

(Black Cottonwood Biry

DOLPHIN or KlUtRWHMt Shown actual jue.

Figs. 482-485. Indian and Eskimo motifs and charms.

250 RELIEF CARVING

Fig. 486. Moor-
ish carved panel
from door in
Toledo, Spain.

Economy may result from mounting a ple group. And therein often lies basic trou-
carved or uncarved silhouette against a ble, because creating an artistic composi-
contrasting background that may be glass, tion or scene requires at least a little

plastic or textile rather than wood. knowledge of art.

Geometric patterns, bust portraits and Elements should not be in the same
all

groups are essentially in one plane, so

floral pose, or of the same elements should
size;
perspective is not a problem; nor is com- not touch, but should either be clearly sepa-
position, except in the case of the floral rate or overlap; a line or shape in a frontal
group. It is relatively easy to carve any of element should not be immediately next to
these in relief. But too many neophytes a similar line or shape in the background.
promptly decide to make a scene or multi- Eliminate extraneous details as scale is

RELIEF CARVING 251

Fig. 487.Alonso Berruguete's life-size head of John the Baptist projects from this walnut panel in
the Cathedral of Toledo.

reduced. Look around you and you'll see distance, cats don't have whiskers, birds
that at a relatively short distance the nails in don't have feathers and men have no lines
a fence and the veins in leaves disappear. At in their faces. If you put such details in, you
greater distance, the fence palings or rails create a sort of cartoon or caricature rather
begin to blur and the leaves themselves than a picture.
merge into a green tree silhouette. At a little It is also unnecessary to show every

252 RELIEF CARVING

 Fig. 488. A surprising coincidence: The figure at left
is from Haiti, that at right from Costa Rica. Both are
two-sided reliefs, and only the heads are in-the-
round.

branch of a tree, every number on a license

Fig. 489. Mahogany panel from
plate or house, every pane in a window or Ecuador is \V/i in (29 cm) tall, V* in (19
every shingle on a roof, particularly if it is mm) thick. Fig. 490. The stylized head
back a bit in the composition. You don't from Ecuador (below) is turned 90°, so
hair is both frame and support.
have to fill every part of the picture with
objects. In nature there are open skies, clear
fields —
and smooth water you'll find the
hard way that adding waves, individual
leaves and clouds is very difficult in wood-
carving. Suggest a telephone or power line;
don't try to carve the wires unless you need
them support a flock of birds. Leave out
to
elements of the background that are unes-
sential to the story you're trying to tell or to
identification of the scene.
Your eye does the same thing you don't —
notice detail unless you study a scene very
closely. A painter can grey or blur such
elements, suggest them with a blob of color.
But you cannot to the same degree, so it is
often better to leave them out entirely. Even
on a head portrait, it is not necessary to
Fig. 490.
carve away the background all the way to
the edge or to some rigid mechanical shape;

RELIEF CARVING 253

 Fig. 492.Russian bowl is lacquer-finished,
then decorated in relief with gouge cuts
through to the base wood.

the panel itself provides that. Framing, too,

is often unnecessary, as an unframed carv-
ing can suggest that a scene goes beyond
the limits of the wood.
You must learn about vanishing points
and how to achieve the effect of distance on
a flat surface just as a painter must. If you
don't, your people and buildings will look
likepostage stamps poorly stuck against a
background, and a continuous line of any-
thing —road, people, train, cars, flying
birds — will look very wrong. Things in
nature are not rigid and unchanging unless
Fig. 491 (above). This "mask" from Easter they're dead. There is always some vari-
Island is actually a flat panel for wall
ation between like objects, animate or in-
hanging. It illustrates the strength of stylized
modern and shapes, incorporating
surfaces animate. There is also perspective that af-
pierced carving and simple V-groove fects size and shape; for example, an animal
texturing. It is about 14 in (36 cm) tall.
standing at an angle to you will appear to
lose size at the farthest portion of its body.

Fig. 493 (left). Attenuated

silhouette figures such as
these from Israel are actually
relief carvings — third
dimension is negligible.

254 RELIEF CARVING

 various photographs of the subject or scene
and have a jury of friends pick the best one.
Then you can project the negative and trace
the parts you want or have an enlargement
made to your intended size (if it is within
reason) to serve as both a pattern and a
guide. All in all, I find the polyglot panel
(see Fig. 448) much easier to plan and carve,
because even scale is abandoned.

Depth of grounding
When laying out a panel, use pencil
rather than pen unless the wood is dark and
you are sure all lines will be cut away. I have
had cleanup problems with soft-tip pen
lines, particularly in coloron light woods
where the ink may penetrate and stain. On
most panels, it is not necessary to sink the
background very deeply. I have one in
Fig. 494. This seems like in-the-round carving ebony in which the background is so shal-
but is actuallymedium relief on the surface of
low that it is by its
really distinguished only
a log. By Bogosav Zivkovic, now in a gallery in
Svetozarevo, Yugoslavia. surface pattern. Depth
grounding (cut-
of
ting down the background) is, of course, a
matter of choice. The deeper you go, the
more modelling you can do (and the more
like in-the-round carving it is); but you will
It is very easy to design a panel so that an also encounter proportionately more
object in the background looks too large undercutting and lateral-view problems. It
compared one nearer your eye, to at-
to is easier, and much faster, to learn some-

tempt to put an essentially tall object in a thing about perspective and panel carving
wide frame or to have a free-form object in a before you attempt a piece like The Last
rigid panel (or vice versa). Supper for your church and find, when
There such a thing as deliberate distor-
is you've finished, that the minister or priest
tion for emphasis, but it is a weak defense decides it will hang best in some dimly lit
for a beginner. You've got to learn first how alcove.
to do it right, something many "modern On small panels, I often do not sink the
artists" have never learned. background more than V& in (3.2 mm); on
One good way to incorporate perspective larger pieces I may ground to a depth of Yz
and composition into a carving is to take in (13 mm) or more. Several factors will

Firmer \
Firmer"
f\'yrf\€f

)u1 lining Setting -\n Groundma 2r\& Jct-in 5attinq-in narrow j«cti'&»\s

STEPS GROUNDING Fig. 495.

GROUNDING 255
 —

determine a practical grounding depth

namely, how many elements are overlap-
ping, how much detail is involved and how
much modelling is necessary. If there are
several planes of depth, it is best to ground
a deeper in most cases (at least until
little

you learn how to make one object appear in

front of another). Also, there is the matter
of panel thickness; if it is relatively thin, say
1 in (2.54 cm) or less, it is inadvisable to
ground deeply. If extensive modelling is to
be done on a bust, for example, or on some
other fairly complex figure, it may be ad-
visable to ground as deeply as 1 in (2.54 cm).
Also, when you ground, the difference in
top and bottom surface areas may cause the
panel to warp slightly during carving.
Grounding is done this way: First, out-
line the area to be lowered with a V-tool or
veiner. This cuts surface fibres and reduces
the likelihood of splintering at the surface.
Then drive in suitable gouges and firmers
verticallyalong the notch to limit the cut
area. I usually use small ones, such as Vs
and A in (3.2 and 6.4 mm) wide.
l

If grounding is shallow, the setting-in or

vertical cuttingcan be done in a single step,
but usually it is best to take it in several
steps to avoid crushing and breakage from
the tool heel's wedging action. It is possible
to set in Vu> to Vs in (1.6 to 3.2 mm)
per step,
depending upon wood density, hardness,
tendency to split and width of sections be-
tween set-in areas (a little experimenting is
advisable here).
After the line is set in, cut down the area
to be grounded with a flat gouge along the
cut lines, then set in deeper and so on. —
Final depth can be measured with a pin
gauge, a mark on a rule or scale or the like,
but I find that in most cases my eye is accu-
rate enough. This is true particularly when
Fig. 496.Medium relief on the surface of a log. This the background is to be textured or an-
seems like in-the-round carving. Carved by Bogosav
Zivkovic, it is now in a gallery in Yugoslavia. tiqued, in which case slight variations in
depth from grounded area to grounded
area are unimportant. It is also possible, if
areas are relatively large and simple in out-
line, to rout the wood out. This assures a
fairly uniform depth but may create burned

256 RELIEF CARVING

even without sanding and reflective fin-
ishes. This is true particularly in hard
woods you cut with sharp tools rather
if

than dull ones or rasps, rotary grinding

burrs or other primarily abrasive wood re-
movers. To reduce glare and highlights
where you don't want them, you must tex-
ture the area. This can be done exactly as
—
you would on the background with a pat-
tern or random cutting of shallow veiner or
V-tool lines, or by stamping with very small
and overall patterns. Any of these textures
breaks up impinging light rays and reduces
reflections.
A few more pointers: If your tool slips or
something else goes wrong, repair the spot
at once before you lose the chip or magnify

the error. Use a good grade of glue with the

cutout chip, with another whittled to
proper shape (be sure it's also proper in
grain and color) or even with mixed glue
and sawdust as a filler. Then work some-
where else for a while, admittedly a hard Fig. 499. Krishna and Raddha (Hindu god and
thing to do. I use Elmer's Glue-all® for most consort) are depicted here in fret-sawed bamboo.
carvings but find a plastic cement better for Parts are carefully cut and glued to a backing, and
some are even broken at proper points to flatten the
outside work. Also, Elmer's works fine for
natural curve of the stem and heighten the three-
appliqueing pieces of wood or building up dimensional effect. Figures are about 12 in (30 cm)
tall; from Sri Lanka.
a blank and, in such cases, can be cut 50-50
with water. It then penetrates deeper, dries
faster and saves glue by covering more sur-
face more easily. In any case, sand or cut
away any glue spillage because it is likely to
affect the finish later on.

Fig. 500. A panel like this

delights Sri Lankans
and me. It is 6V2 x 12 in
(17 x 30 cm) and
combines a bullock and
an elephant, face to face
to a greater degree than
expected because they
share a face and an eye.

HINTS ABOUT PROCEDURES 259

 — —

and the other faired out onto the adjacent

surface will make the edge behind the ver-
tical wall appear to be higher than the adja-
cent surfaces. Cheeks can be given the ap-
pearance of being behind a nose by making
the nostril lines sharply vertical and the
nose outline above them more vertical than
the curves of the cheeks. The same thing
applies to brow and ear lines, beard lines
and on faces, as well as to scenes.
hairlines
One panel I saw recently included three
houses, each looking as if it had been pas-
ted atop a crudely shaped mound. The
problem was that the carver had a vertical V-
cut along the bottom of the house so that it
projected from, rather than rested on, the
Fig. 501. Moonstone is familiar as the base step to ground. The perspective was also wrong.
Buddhist temples, and depicts the seven steps to These things must be learned through ex-
Nirvana. In stone, it is usually a half-circle. This
one, in wood, is a complete circle 14 in (36 cm) in perimentation; you can't carve a good Last
—
diameter, but shows only five steps it lacks a ring Supper on the first try.
of sacred geese and another floral ring. Carving is
excellent and crisp, particularly on the animals.

Far-Eastern reliefs
India, Sri Lanka, Kashmir, Nepal and
Tibet all have a tradition of woodcarving

you want particular thickness only in

If
that spans centuries. What survives from

some areas, buy wood in a thickness neces- the old days is very competent and ornate,

sary for the panel and glue scraps on top in and is usually religious in tone. The mod-
the areas that must be thicker. I've done this
for a coat-of-arms on a panel, the bulge of a
hull and for a special element on the front
corner of a house. The same technique can
be used to take care of a rotted, discolored
or worm-eaten area. Just cut out the rot or
knot and replace it with a selected piece of
the same wood carefully fitted to the hole.
It may prove better to have an irregular

shape than a regular one, since masking

such a line is often easier. Be sure any large
filled area has the same color and grain (or

figure) as the wood around it. And don't

sand the area until you're done, if then
imbedded grains of sand can play havoc
with the edge of a woodcarving tool.
Fig. 502. Teak box about 4 x 6 in (10 x 15 cm) is
It is also important to experiment with V- probably from Sri Lanka; it has the familiar
cuts or others when defining the edge of elephant motif on the lid and even more familiar
something. A V-cut that makes an accurate lotus and floral designs on its sides. Backgrounds,
typical of East Indian work, are stippled all over
vee with the surface will simply be a defi- —
probably with a punch and figures are stylized to
ning line, but a V-cut with one side vertical a considerable degree. (See Fig. 503.)

260 RELIEF CARVING

ern work is turned out largely in "factories" carvings may
be framed or unframed, geo-
for the tourist trade, and the carvers are not metric shapes, free forms or silhouettes,
hobbyists nor artists, but craftsmen earning non-planar or pierced work, in a bewilder-
a living. In most instances, there is one ing variety of woods. Carving is of good
artist-designer and several carvers, often quality, as are designs, and although it may
in shops with practically none of the also have pieces from other factories for
amenities such as power saws, grinders or sale, a particular factory is likely to be spe-
even electric power and light. The factory is cialized.
primarily a place to work and a sales outlet. In Sri Lanka, panels are carved in the
Tools, too, are limited in number; many are Kandy area, ebony 3-D figures in Galle,
homemade strictly for the particular work a masks of nux vomica in one particular south-
carver does. There may be an antique vise coast village, and so on. I could have traded
or two, and nothing but the floor for a a pocketknife in any factory for a really
bench, but there are also helpers to do good carving; one carving school up a dirt
preparation, sanding, finishing, polishing road outside Sigiryia, Sri Lanka, had a
and other onerous chores. cheap set of six American tools kept care-
In contrast to the United States, where a fully in its originalcardboard box. This
high percentage of carving is in-the-round school had no power, so used gas-pressure
and small enough to be held in the hand for lamps at night for its 15 or so apprentices,
whittling, many of the carvings made in who were schoolboys aged 12 to 20, who
this area are in relief. This ranges from very went to school in the morning and then
shallow, to quite-high-relief copies of old came to apprentice in afternoons and eve-
work (particularly in India, where some nings for eight long years. They should be
copies are claimed to be antique frag- good!
ments). What's more, the variety is marked;

\i.

Edq« of
front'
~
I
Edge of top panel
-^ Elements are modelled

*- Hinged joint
Fig. 503.
^Note that flovoer
has 7 petals

- Background stippled
with punch or v/eineK

Lotuspelal bands on -fop rim

EAST INDIAN MOTIFS on a feak bOX

FAR-EASTERN MOTIFS 261

Figs. 504, 505 (above and right). Two bird panels by
T. E. Haag wide range of scenic
illustrate the
depiction possible in low relief. (Above): A detailed
duck against a textured background. (Right): Three
stylized flying swans against a patterned
background. One is framed, the other has unusual
outlining with latitude and longitude lines, bowed
and spaced to give the flat panel a global effect.

Fig. 506. This Nepalese scene is in sisso, an antiqued light wood, and depicts village and city
with adjacent countryside. Dominant is a stupa (temple) with "paper" prayer streamers from its
peak, surrounded by typical multi-storey brick and stucco buildings. Stylized rural area in
foreground and at left includes rice paddies. Size is % x 6V2 x 11 in (2.2 x 17 x 28 cm).

262 RELIEF CARVING

 Fig. 507.

Figs. 507-509 (above, right and below). From far-off

Tibet comes this octagonal triple folding tray in
walnut. The 7-in (18-cm) sides fold down (below) to
reveal carved-tray inner surfaces, plus a tilting tray
in the middle. Motifs are floral.

Fig. 508.

Fig. 509.

FAR-EASTERN MOTIFS 263

 Fig. 511.

Fig. 510. A carver works on a mask —of nux vomica

(a wood with poisonous berries used in
like balsa,
medicines) in a factory in Sri Lanka, while his
partner tests the edge on his chisel. Carvers are
pieceworkers, with nothing beyond a circular saw,
flat table and bench, and a tool or two apiece.

Figs. 511, 512 (rightand above). The lotus has deep

religious significance to Hindus and Buddhists
alike, and is a frequent design motif. Here is an 8-
in (20-cm) disk from Sri Lanka that features this
design.

Fig. 512.

264 RELIEF CARVING

 Fig. 513 (left). Head-size mask, depicting the fire
demon featured in Kandy dances in Sri Lanka. A
mask such as this takes about a week to complete,
including carving and elaborate enamelling. Side
projections are removable and plugged into the
semi-cylinder face.

Figs. 514, 515 (rightand below). Another

delight to Sri Lankans is this variation of the
Chinese puzzle box, with elephant and lotus-
blossom border on its cover. It looks like a 6
x 9-in (15 x 2-cm) light-colored book, but
then backbone is pushed down and back,
allowing central panel to slide to the side,
Fig. 514.
revealing the Vi-in (19-mm) "secret
compartment."
BOX COVER
S«cr«V pincl in maho^wy
book-itafad t>uuk Sri Untfe

FAR-EASTERN MOTIFS 265

Animals in relief

Figs. 516, 517. Simple animal forms

are silhouetted atop these small
bread or cheese boards from
Holland. Details such as nostrils,
eyes and mane separations are done
with a veiner and small gouge, the
bottom scallops with a gouge.

B0f\RD5
ands.

ocs

Fig. 518.
Actual sue of boar<\ %*^*\0'i

'2 qouqt jcallops

Fig. 519. f~~\ i<~\ ^>, fZT\ <-r7\ /TT>>

266 RELIEF CARVING

 X?

*v A<+

Fig. 521.
Fig. 520.

Figs. 520-522. These three figures from a

kubbstol (block stool) were made by the
author from an ash log. It is an example of
extreme foreshortening, because background
depth is only V\ in (6 mm), while the subjects
are 10 in (25 cm) or more tall. It is essential to
create the visual effect of depth to separate
the warriors from their horses and saddles.
Designs of this sort require a great deal of cut
and try. Staining the lines and background
helps to create depth.

Fig. 522.

ANIMALS IN RELIEF 267

Door panels

Fig. 523. Flower panel is 1-in (2.54-cm) teak, tree panel comprises two glued pieces lVi in (3.2 cm)
thick, and fish panel is Vt x 9 3/s in (1.9 x 24 cm) wide.

268 RELIEF CARVING

 panels are %-in (19-mm) teak 9 3/s in
Fig. 524. All three of these (24 cm) wide. Insect panel is most
complex of the group because of antennae and legs.

DOOR PANELS 269

 —

From clouds to sheep

step-by-step
This panel in pine is relatively simple to
carve compared to the door panels and will
help you learn to handle firmers and
gouges. The design is modified from a
poster and provides a smile as well as a
carving. My blank was 2 x 12 x 14Vi in (5.1
x 30.5 x 36.8 cm) and I laid out the com-
position directly on it. Now follow the carv-
ing, step by step.

Fig. 525. Step 1. Lay out the design to suit the

available wood. I showed single sheep in various
poses, some groups, and added a lamb or two as an
afterthought. They are posed on a hillside, with
clouds floating down so low that three are actually
below the horizon; they repeat the general shape of
sheep immediately below them. The original layout
was in pencil; I tried not to overload the
composition, and to vary poses. Shallow low-relief
carving of the sheep has here been started as a test.

Fig. 526. Step 2. It may be advisable to alter poses of individual animals to improve the balance. In this

closeup of the lower right-hand corner are two such changes, one lowering the head of the ewe at left
towards the lying-down lamb, and the other to attain a more compact grouping at center, leaving a larger
area of open grass. Legs must be sloped back towards the feet so they apparently are behind an irregular
pattern of grass spears. Units have been outlined with soft-tip pen.

270 RELIEF CARVING

 Fig. 527. Step 3. I decided to leave a border
and slope in from it ground and sky.
to the
My testing indicated that a depth of only Va in
(3.2 mm) for the grass area was enough to set
out the sheep, permitting the easy solution of
setting the hill fold at left back an additional
Vs in (3.2 mm) and making total depth of the
grounding at the top Vs in (9.5 mm). This was
worth the time of setup for routing, as was
the Vt in (6.4 mm). Note that routing is only
approximate around the nebulous cloud
shape, which is best determined as it is
carved. Shapes are important only to avoid
crowding and to suggest the transition to
sheep at the bottom.

Fig. 528. Step 4.The remainder of the

meadow is grounded out and left with
vertically gouged scallop marks to suggest a
grassy field. Clouds are carved in swooping
billows, with very little undercutting.
Individual sheep are modelled slightly, and
pelt textured with irregular gouge scallops to
suggest a fairly short coat of wool and avoid
flatness which would reflect light. The grass
is a tint of green, of course, darker in the

distance, sky a light blue, and the sheep

white with black eyes and slight antiquing
with grey to bring out modelling. The
general effect, however, is attained by not
overdetailing the sheep.

STEP-BY-STEP PANEL 271

 Fig. 529. Clouds become sheep in this pine
panel, 2 x 12 x UVz in (5.1 x 30.5 x 36.8
cm), painted with oils.

Fig. 530. Tool Note: Very few tools are required for the cloud-sheep composition. Here are those I
used (except for the router): left to right are a Vi-in (6.4-mm) V-tool; Vi-in (12.7-mm) wide gouge,
Vi-in (12.7-mm) radius; Vi-in (12.7-mm)-wide gouge; 3/8-in (9.5-mm) radius; Vi-in (12.7-mm)-wide
gouge; W-in (6.4-mm) radius; %-in (9.5-mm)-wide gouge, and a whittling knife. The knife took
care of details around the head, like the eyes and mouth, and was useful in general modelling.
Even the clouds were left unsanded. Colors were oil pigments in varnish, and the finished job
was given a spray coat of satin varnish to reduce the gloss. Then I made a sketch on paper for the
record.

272 RELIEF CARVING

Relief combined There are several books on canoeing with
with stylized wilderness pictures of two people in a canoe, as well as
WOODCARVINGS OF SPECIFIC SCENES and pictures of this particular canoe, so a rough
people can be challenging to any carver, sketch could be made. Once this was fin-
because they usually involve foliage, may ished, the client made several criticisms: I

include water and clouds, and can be ex- had seated him too far forward; I had
pected to achieve at least approximate like- changed the point of view from that in the
nesses. The usual in-the-round treatment pictures, raising it slightly so more of the
of such a subject tends to be a caricature, legs of both people were visible; I'd made
and a very stiff one at that. A relief panel the paddles too short; instead of the flat

offers better prospects, but can be difficult shoreline I'd drawn, there should've been a
as well. Thus, it is advisable to make a series curved one, with a bluff and rocks, and
of compromises, possibly arriving at an un- over the bluff a tangle in which birch, an
usual solution or depiction. apple and an oak could be distinguished at
This panel (Fig. 531) will serve as an ex- designated points; there were no pines,
ample. It was a commission, a birthday and at the left, there should've been an
present for the lady of the carving from her edge with an overhang. There should also
husband. was to depict them in their
It have been a slight bow wave and a small
canoe, not on Long Island Sound where wake as well, he suggested.
they commonly paddle, butan island in
at These alterations were put on the sketch,
northern Maine. No pictures were available which was then adapted to a piece of old
of the island, the canoe or its occupants, but mahogany % x 12 x 19 in (1.9 x 30 x 48
the canoe is a standard Grumman® 17 and cm). I arbitrarily decided to lower the
the occupants are friends, so there was a ground Vi in (13 mm) around the canoe,
starting point. leaving wood for the bow wave and wake,

jN for
'
;##^

Fig. 531. Mahogany panel, }A x 12 x 19 in (1.9 x 30 x 48 cm), is made from a century-old table leaf, so
patina is preserved in framing and brush on the shore at top.

RELIEF CARVING 273

as well as for the eddy where the visible when the center of interest should be the
paddle enters the water. Only the lower canoe. So the bush area was simply stylized
portion was grounded, initially. with irregular lines, although portions of
Water can be difficult to depict if you try — the boles of the three special trees were
to be too specific. It is much easier to suggest made visible in suitable locations and iden-
wavelets by leaving the background rough tified by branching and bark texture. The
and texturing with a small-diameter flat
it birch, for example, could be carved so that
gouge, say a (13-mm) No. 4 or 5. The
'/2-in the dark patches indicating one-time small
curvature of the canoe was shaped to clear branches could be left while the patina is
the visible paddle, show the precise posi- cut away to lighten the rest. On the oak,
tion of bow wave and wake, and to get a there are vertical lines simulating bark
proper meeting line between canoe and markings and high-up branching. On the
water. Bad meeting lines, between such ob- apple, there a shorter trunk and a visible
is

jects as a house and the ground in front of crotch. This worked out quite well, and
it, are a common error in low-relief panels. saved a great deal of time, energy and likely
Here, the curvature of the canoe itself disappointment.
makes the solution obvious. The canoe sur- The finished piece was given a spray coat
face brought down to the water; there is
is of satin varnish as a sealant, followed by
no step between. two coats of Kiwi® neutral shoe polish.
When rough shaping of figures and ca- (Conventional waxes tend to load open-
noe were completed, it was possible to go grain woods like mahogany and eventually
back and do the shoreline, indenting it ir- create grey speckles, unless the entire sur-
regularly and establishing the rocks along face is filled.)

the shore to match the client's description.

Again, the rocks had to be sloped on their High permits realistic scenes
relief
lower surfaces so that they met the water High-relief carving was, until perhaps
without too much step, and cut back near 100 years ago, quite commonly done in Eu-
the male figure to help him stand out. Some rope and Japan, and, by extension, in the
visible shoreline (where the sand itself United States. It was the common form of
meets the water) was also included to estab- carved decoration in palaces and mansions,
lish perspective. To get the effect of an over- churches, temples and monasteries. Panels
hang and erosion, the "vertical" portion of were incorporated in heavy furniture, such
the bank was sharply indented along the as chests and cabinets, applied in over-
top. This idea was enhanced by showing a mantels, door frames and ceilings, even on
side view of the overhang at the left-hand walls. Much of the private decoration was
upper end. This takes some juggling, and composed of bucolic scenes involving peo-
requires that you stand back and look at the ple and animals with a background of trees
entire panel frequently as you work. and shrubbery, but in churches and monas-
Because the panel was old mahogany it — teries it covered a wide range of religious
had been the center of a small table for over subjects, from depictions of saints to the
a hundred years —
the surface had a dark Stations of the Cross.
and attractive patina, which had to be sacri- High-relief carvings usually incorporate
ficed for the water area and the principal a number of figures, often carved in the
subject. By trenching in at the edges, I round, to depict a scene against a foreshor-
could leave a darker border or frame on tened background that serves as the equiv-
three sides, along with a V-tooled, border- alent of a stage setting (and which may
I had carved along the top.
defining line include medium and/or low relief, as many
seemed rather absurd to attempt carv-
It museum dioramas do). Forced perspective
ing a Maine wilderness atop the island is commonly employed.

274 RELIEF CARVING

 HL 'iMiMflh
^fak^
Wbm

r y

^Hmli J ^^F

Figs. 532, 533. Philippine women, in mahogany and 2 in (5 cm) thick, are almost half-relief. Each
has an integral-carved earring. Because of the depth, modelling is relatively easy.

The most famous English carver, Grin- appear florid and overdone by modern
ling Gibbons, who commonly carved swags standards.
of flowers and fruit, was, in fact, criticized Ken Evans, Oregon, owns
of Portland,
(and still is) for occasionally carving his the unsigned carving (Fig. 535) and has
subject in the round and appliqueing it to a made extensive inquiries about it. It is prob-
panel. This permitted him to work from ably a copy of the painting made in Austria
both back and front, and lessened the prob- by Franz DeFregger (1835-1921), but the
lem of how much undercutting was neces- painter was originally a carver who didn't
—
sary a problem which still plagues any- study painting until he was 25 years old,
one who undertakes a high-relief carving. and the painting was made nine years later
His favorite material was limewood, al- inMunich. Did DeFregger make the carv-
though he also worked in other woods, ing, then copy it later in oils, or did some
bronze and stone, and his work has never
been surpassed in Europe. Some of his
swags, in St. Paul's, London, and other En-
glish buildings, tremble at the slightest
vibration —and have been trembling for al-
most 300 years.
The vulnerability of high-relief carving
(both during and after carving) may be one
of the factors that led to its decline.Others
are: changing tastes in decoration, reduced
availability of thick wood, and greater con-
sciousness of time. In high-relief carving, a
relatively enormous amount of wood must
Fig. 534. Toreador and bull from Ecuador, was
be cut away, unless frontal figures are appli-
pierced and silhouetted, and looks deeper than it is.
qued. Also, the completed work is fragile, a The 10-in long (25-cm) panel only Vi in (12.7 mm)
is
real dust-catcher, and has a tendency to thick.

RELIEF CARVING 275

unknown make the carving? Nobody shallow, with backgrounds sunk as little as
knows, which minor argument
is at least a V» in (3.2mm) on small plaques and Yi in
in favor of signing carvings something — (12.7 mm) or 1 in (25.4 mm) on larger ones.
that European carver-craftsmen did not do The illusion of greater depth is obtained by
often, because their work was often copied darkening or texturing the background, by
from paintings. pierce-carving, or by silhouetting the sub-
The subject of both painting and carving ject so that there or no background of
is little

comes from an actual occurrence in 1809. the wood itself. This makes modelling and
Josef Speckbacher, the central figure, was a forced perspective extremely important; so
leader under the Tyrolean patriot, Andreas important, in fact, that many carvers make
Hoffer. He was meeting with others at an mistakes and their panels have a "wooden"
inn when some of his men discovered that look (forgive the pun). Others are ex-
his eight-year-old son, Anderl, was actively tremely intricate, containing so much de-
participating in the fight for Tyrolean free- tail, plus efforts to undercut, that they be-
dom against the French and Bavarians, ob- come fussy and overdetailed, losing their
viously without the advice or consent of his strength in more ways than one.
father. In the picture, a Schutze (marksman) Here I have attempted combine a great
to
of the Freedom Fighters is returning the many widely differing subjects and tech-
son to his father (Fig. 537). Note, in the niques to provide a sort of index of low and
carving, the almost free-standing figures, medium relief, and of modelling, and to
the complexity of the wall decorations, the show how and where they differ from in-
detail in the "wall painting" of the Madonna the-round, which is quite similar to high-
and Child and the fully carved
(Fig. 536) relief carving. Consider, for example, the
little wagon at upper right. Which was first, two silhouette panels in mahogany from
painting or carving? And who
carved the the Philippines (Figs. 532, 533), typical of
panel? The carving is 4 x 24 x 20 in (10 x the technique commonly in use there. Each
61 x 51 cm), and weighs 37 lbs (16.6 kg) is 10 x 13 in (25.4 x 33 cm), but carved
with its wide and elaborate frame (not from 2-in (5-cm) wood. This thickness, com-
shown). The wood is cembra pine. The bined with the silhouetting and modelling,
carvershows textures on the deer horn and makes the carvings appear almost in-the-
wrinkles on the faces, as well as defining round, except for a flat back. The carver
hair and other details. actually achieves considerable depth in
This is an excellent example of the use of modelling the face around the eyes and
high relief to tell a story, rather than being neck, which gives the face a natural look.
limited to the depiction of an individual or Further, he carved the earrings free, using
group, as a three-dimensional single figure the old "chain trick" to achieve an effect.
normally shows a familiar subject, and
is. It The high modelling of medium relief is
the carver was therefore able to base his obtained in the woman-and-child panel
work on —even his
fact if "fact" is only a (Fig. 489) and the bullfighter panel from
painting —and he wasn't forced to stylize Ecuador (Fig. 534), as well as in the series of
because his knowledge did not extend to Indians and other figures from the Pa-
precise details. tzcuaro area of Mexico (Fig. 538). The Mex-
ican carver was not nearly so skilled in tech-
Lower relief and modelling nique, but these figures have a crude
Ifhigh-relief carving is accompanied by strength, nonetheless. The carver let his
problems in deciding how much undercut- imagination run free. Some of the full fig-
ting is necessary, lower-relief carving ures are 6 ft tall (1.8 m); all are at least 1 in
brings similar problems in modelling. (25.4 mm) thick, in soft wood. Sharply con-
Most present-day relief carving is quite trasting in size is the small head of a girl

from Ecuador (Fig. 490), with its somewhat

276 RELIEF CARVING
Figs. 535-537. The above unsigned carving is 4 in (10 cm) thick, roughly 20 x 24 in (50 x 60 cm),
and includes every detail of the painting from which it was taken. Close-up (below right) of
marksman and boy shows how the illusion of depth was obtained. Note the free-standing figures
and perspective size-reduction. Other close-up shows detail of antlers and the low-relief
miniature of the Madonna and Child.

sd
- ,<^--
\
L c^&
^
fePesg

Fig. 536. Fig. 537.

RELIEF CARVING 277

 DANCERt CAMPESINOt QUIXOTE* MAROl GR^S fARMER

Fig. 538. Sketches of primitive Mexican figures from Patzcuaro.

stylized face (accented nose and eyebrow thickness is reduced, so that planes and
outline), which is actually in the round in apparent relative elevations become in-
wood 1 in (25.4 mm) thick, framed by the creasingly important. Familiar handlings of
hair at the top and brought to a pointed and thisproblem are depicted in the little In-
thin tress below to provide delicate, bal- dian-head pendant from Peru (Fig. 539)
anced support on the base. and the copy of an antique candle sconce
In all modelling is not
of these carvings, from Spain (Fig. 542). Ruth Hawkins in
much of a problem because the third di- Brasstown, North Carolina, contrasted her
mension is deep. The difficulties increase as two angels in holly (Fig. 540) by mounting

278 RELIEF CARVING

 Integral
eyelet

Front One Face

Bottom
Fig. 539. Indian-head pendant from Peru is triangular in cross-
section.

Fig. 540. These angels, carved in low

relief in holly, would be lost as
nlaid ivocy mates eyeball,
silhouettes unless placed against a
«amng contrasting background.

Fig. 541. Maya profile, contrasted here with one

from Haiti, was carved in ebony, with very low
relief.

them on a strongly patterned cross section

of branch, which ties the composition to-
gether and silhouettes the figures.
In working out a design on a surface, or
in carving shaped objects and plaques, it
may be enough to use very little modelling,
leaving much of the surface flat and un-
SCONCE
Spain- Antique
disturbed. An excellent case in point is a
tabletop which, Gilt finish
if carved at all, should have
minimum-depth surface carving, so the
stability of objects placed upon it will not be
imperiled. Also, fewer crevices are thereby
provided for the accumulation of dust and
dirt. (This, of course, is less important if the

carving is to be covered with glass, but

some compromise must be arrived at be-
tween the amount of wood surface there is
to support the glass and its thickness.) The
design should be worked out so that any Fig. 542. The copy of an antique candle sconce was carved
complex or deep carving is away from the in soft wood. Note the exaggerated nose and brow lines.

RELIEF CARVING 279

Figs. 543, 544. Head of Tarahumara Indian
(left), in cedar, was trench-carved and is self-
bordered. The study of Benito Juarez (right),
is in mahogany and has various V-grooves
detailing general features.

Fig. 544.

areas where stability is needed. A flat tab- modelled? Should it be trenched, leaving
letop saw in Bali had large and flat floral
I the background high around it, self-
designs at the points where service and framed, or have the background bosted
salad plates, saucers and centerpiece would away? Should the lowered visual effect of
normally be placed, while the rest of the shallow relief carving be compensated for
surface was actually deep-relief and pierce-
carved.
It is not always necessary to work over an
entire surface and to blend lines and
all

model all contours; it may, in fact, be better

on occasion not to do so. One factor is the
grain of the wood. If it is strong and lovely
of itself, carving should be subordinated or
even omitted. Any effort to subdue a strong
grain with even stronger carving usually
ends in confusion for both carver and
viewer.
Again, if the wood is old and has a desir-
able patina, minimal carving will help to
preserve the patina. If it is a chair back — or,

—
worse still, a chair seat minimal carving
will be appreciated by any sitter.
In addition to the questions raised in the
preceding paragraphs, there are those hav-
ing to do with technique. Should the de- Fig. 545. This head of an American Indian was
sign have crisp, sharp edges, or should it be trench-carved by Ted Haag.

280 RELIEF CARVING

by darkening the background or the lines of protects the carving itself. Framing is often
the carving itself as a scrimshander does? confining and more trouble than it is worth.
How much should line width be varied, The answers to others of the preceding
groove-angle changed? Should surface tex- questions, and perhaps additional ones,
turing be used, and if so, should it be with will become apparent by study of the shal-
veiner, V-tool or knife? Cross-hatched or low-carved panels. I carved the Tarahumara
gouge-scalloped? Indian (Fig. 543) from memory in Mexico,
Many of the answers to these questions in a piece of cedar, using only a
depend upon personal taste, and find my- I pocketknife. The high-set cheekbones are
self varying from panel to panel, often sim- suggested by shallow hollowing beneath
ply to see what effect I can get. Any modell- them, the deep-set eyes by sharp brow
ing or texturing breaks up impinging light lines above, the strong jaw and thick lips by
and changes the apparent tone of what the the hollowing around them. It is less effec-
observer sees. Thus, gouge-scalloping, tive than the Indian by T. E. Haag (Fig.
cross-hatching or parallel-lining will make a 545), which uses deepened relief. The head
surface appear darker because the reflected of Juarez in mahogany (Fig. 544), also
light isn't beamed as it is from a flat surface, carved in Mexico, but from a Covarrubias
Textured areas tend to sink back, an effect sketch, is about 4 x 6 in (10 x 15 cm) and
which can be enhanced by "antiquing" almost the equivalent of a pen-and-ink
them —going over them with a slightly sketch. Sharp edges define the nose and
darker stain and immediately wiping most eyes, the collar and hairdo. Tilted V-
of it away, except in the deepest areas. (This grooves raise the lapels above the jacket
is actually an "instant patina" —
because and project the lips forward from the lower
true patina ismerely the accumulation of cheek, as well as the hair in front of the
dirt, grease, dust and such over a long forehead. The trench groove around the
period of time, and it is naturally heavier in head is also tilted to give a wider outside
the grooves and hollows.) edge and visually sets the portrait ahead of
I find that irregular grooving tends to the background,
create the effect of slightly wavy hair; reg- The next example is a breadboard in
ular and precise grooving suggests hair cherry, carved for a music teacher (Fig.
drawn tight to the scalp; fine veiner lines 546). The masks a hanging hole,
central clef
suggest fine hair (except on small figures, and the silhouette of the grand piano on the
when no lines suggests even finer hair); and left is matched by a series of children's

coarser lines suggest a pelt or coarse hair, as heads on the right. To separate the figures
in a lion's mane. Tilting a V-tool away from from the background, and to control the
one edge, thus lengthening the other side visible grain to a degree, the background is
of the groove, tends to make the sharper lowered and textured with roughly parallel
side rise visually above the wider one. As shallow gouge cuts. Another breadboard
the depth of relief is reduced, the effect of (Fig. 547), also of cherry, shows two skate
even slight variations in surface level and dancers, slightly more modelled. Both ex-
modelling becomes greater, so hollow amples approach outlining rather than re-
cheeks and the like can be obtained with lief carving at all.
very shallow shaping. Also, with very shal- The essential in any work like this is a
low relief, crisp edges will stand out, steady and sure hand, as well as a clear and
rounded edges will disappear (an argu- clean design, because every line will show
ment against sandpaper also). Trenching in the finished piece. When used on wood,
does not take away from the carving see — it becomes more difficult because of the
the Indian and Juarez (Figs. 543, 544). It wood grain. Also, because wood is likely to
saves a lot of fussing over background and be dark, the filler color should be a white oil

RELIEF CARVING 281

 Figs. 546, 547. Two breadboards, in cherry, are 7 x 11 in (17.5 x 27.5 cm). The one at left was carved for a
music teacher, the other for a skate dancer.

paint, which is applied in the lines as far as which requires the carver to think —and
possible, then allowed to dry and sanded carve —in reverse. It is particularly valuable
off. The problem with wood is that it has as training for carving smooth hollows or
surface pores, so the pigment may fill them concavities with gouges; a knife is almost
as well as the carved lines, and may tend to useless as a tool for such work. A power
weaken the design. rotary tool can be used, but it tends to leave
a rough surface onto which the moulded
Intaglio carving is "inside-out" material will stick, as well as to create unin-
Nearly a century ago, it was quite com- tentional undercuts and make what should
mon to mould designs in relief on the sur- be straight lines irregular.
face of butter, cookies, cakes and gelatine Older cookie and butter moulds had sim-
desserts. This was done with moulds of ple geometric patterns, and were usually
wood which had the design in reverse; the flat boards which were pressed against the

high spots of the moulded design were the material to be moulded; but as time went
low spots of the mould, and vice versa. In on, all sorts of elaborate designs were pro-
industry, similar moulds were used for rub- duced, including coats of arms, initials, and
ber, plaster, celluloid (somewhat similar to even scenes. For cookie dough, in par-
modern plastics), and other materials. Such ticular, designs were ultimately carved into
designs were achieved by intaglio carving, a roller similar to a rolling pin, which made

Fig. 548. Springerle

cookie-roller with
patterns.

282 RELIEF CARVING

 =3

6r

Fig. 549. Springerle cookie-roller patterns.

the impression more uniform. These rollers and V-tool. Short-bent gouges are helpful
decorate springerle, a lightly spiced German but not essential for spherical cuts. Best of
Christmas cookie. all, designs really don't have to be too pre-
Designs are carved, largely in single cuts, cise, and
so you can learn to swing the tool
with small, deep gouges, and detailed with cut from various angles to accommodate
the veiner (itself a very small, deep gouge) grain. Also, the designs can be put on a flat

INTAGLIO CARVING 283

 board rather than on a roller, or used indi-
vidually for decorative panels.
Preferred woods are light-colored ones
with dense grain, like maple or birch. Pine
can be used, but the grain tends to rise if the
piece gets damp (important only if you plan
to make cookies or moulded butter pats).
Tools must be very sharp to avoid tearing at
cut edges, and sanding should be avoided.
If the panels are purely decorative, any

wood can be used as long as it isn't too

inclined to The carving in such a panel
split.

can be made more prominent and deco-

rative by "antiquing" with a slightly darker
stain. If you plan to do this, first apply a

thin coat of matte or satin varnish so the

Fig. 550. The Maoris of New Zealand are stain doesn't penetrate cross-grain areas
particularly adept at low relief carving. This panel
in pine by Austin Brasell shows motifs that are
unduly and cause undesirable dark areas. If

usually background or secondary to a principal the surface is sealed, stain can be applied
figure depicting an ancestor. White spots are paua and wiped off the surface before it dries, so
shell; size is % x 15 3A x 15 3/4 in (1.9 x 40 x 40 cm).
shading of the color is possible.

Fig. 551. (below) Typical Maori's motifs.

THE RAPARAPA (end of barge boa m)

AtAVM MASK
Brt™ 4 mJk 4«u-r«Xi0t
i M n'i'*"if «KIS<4 l*WJ
by«l4»«'«hrt«.t4»rt
1o*qi* 'i4drj..'i<
loof, H* jkif Ran (yf. J

NOTCH PAmUMS&WJ
>,p '-ir-ti Tfi*-(I M -"'

Almond {fV^fr^^M-^l

r>aq»*-fc.oth(i.erto»i«)A '

ROTORUA MASK U
. ii..«-,m-«!
-I J" H 0«rUfP«i f
MASKS ^«(<i •« DT9 * A ' lin«A

^m Redman)
FfOm muStiCnj POURANGAWUu.i Cort-»S S- X
Not* r«du«d
Flying from rtiwaikl on PANEL (fadmar,)
detail On f.sk-
tn« macj.cb>rd (n\&«»'»?) Roforui stylt-sw
hook a1 Top
PllWR-7i.il PllAAR-B«lH Note KnucWtd fm«trj.Wj knucklo Soodqcd
SPIRALS
MY/59
Black 15 sneJI (Sourtt of ouTtripKf tales) djf<itj ^ folk*)
TATTOOtD HfAO

LIZARD -an unusual form (itandj vertical) PlE RC t"V\MAIA moval-nok bird moult,

284 RELIEF CARVING

 10U-RELIEF D

5TYLIZED FIOVIEI

BOY NfTSUKF om-b.^

HORSE

TURTL
FROG orTOAD-3 Forms

Fig. 552. Low-relief designs for trays. Amphibians are a favorite gift between Japanese families,
wishing long life and good luck. On earlier trays the carving may be tinted and even be partially
gold-leafed.

Much more elaborate designs can be work.) Note, incidentally, that ridges are
carved this way. You've undoubtedly seen difficult because of the problems of smooth-
some, such as the "gingerbread men" from ing the surfaces around them. The small
Williamsburg, Virginia. Incised lettering, lines suggesting feathers on a bird or veins
trade-marks, logotypes, even inverted por- in a leaf are all incised (cut in). This makes
traits, such as those carved in shell in Italy, leaf veins stand out in a cookie as they do in
are also possible. (For shell, a rotary tool real life, but the feather divisions will stand
with grinding wheels does the heavy out rather than being depressed. Optically,

LOW RELIEF CARVING 285

 f

Fig. 553. A three-dimensional copy of a detail of Picasso's "Dora Marr Seated." This is a low-relief carving
in walnut, Vtx 11 x 12 in (1.9 x 28 x 30 cm). David Peters was the carver.

this is not unpleasant, and therefore course, be formed by a series of small cuts
nothing to worry about; but if you do tend with a somewhat flatter gouge. It doesn't
to worry, such elements as feathers can, of affect the taste of the cookie.

286 RELIEF CARVING

 18

How to Carve Lettering

Lettering on a carving may have one or easiest form is V-groove incising, par-
more purposes. It can be just a signature ticularly if the wood and the tool sharpness
and/or date, a title, a dedication, or the permit use of the veiner or V-tool, or you are
major subject of the carving itself. If you working in end grain. You can go all out and
carve a likeness, you will almost certainly do raised lettering as a continuous cursive
want to add a title. The Arabic alphabet is strip, as if a ribbon had been laid on the

cursive (script) and flowing, thus lends it- surface to form the letters. If you undertake
self toendless variations and is easy to in- that, be prepared for trouble, and expect no
corporate in a design, but our Roman al- sympathy from me. It is my firm belief that
phabet is rigid and much more difficult to much lettering on carvings, particularly ti-
use. Once it consisted only of capitals, and tles, is unnecessary and looks crude, even

before that simply incised strokes, but the if the carving itself is well done. If you must

addition of lower-case letters for ease of have elegant lettering, have it engraved or
reading, and of the running-hand, cursive etched on a brass or silver appliqued plate.
or script forms for easier handwriting, tre- Even the simplest lettering is difficult to
mendously complicated the job of the carve. The difficulties include line width,
carver. Today we have vertical letters and spacing and depth, and increase with
sloping letters and many alphabets
(italics), smaller size and more complex letter forms,
have weighted lines and curves and lines to such as serifs and swashes, as well as if the
end each basic stroke. These letter termi- letters must project rather than be incised,
nals are called serifs and are a major prob- because the eye picks up very small vari-
lem in relief carving, particularly across ations in the curve, spacing or width of a
grain. Also, letterers add flourishes called line. Further, calligraphy —
the design and
swashes to the tails of letters —as some pen- execution of ornamental lettering —
is rising

men do —or make elaborate tails and loops in public favor, so many people are more
called uncials. conscious of letter forms.
All this does not mean that any lettering It is a paradox that the typewriter and

you do must be elaborate —or boring. You most other forms of commercial type place
can vary the designs to suit your purpose, each letter in a block of uniform width and
as long as the letters are recognizable and height, while the calligrapher and the
legible, and you can finish them in many handsetter consider a great many spacing
ways. The effect of raised lettering can be variations essential. Small wonder that
achieved by stamping or otherwise textur- carvers go to templates and routers to pro-
ing the background around it; letters can be duce passable lettering!
outlined (if they are large enough), inlaid or There are an endless number of rules that
even carved with channels or grooves in the the sign painter and the hand typesetter, as
wider verticals of capital letters. But the well as the calligrapher, follow. Some of the

HOW TO CARVE LETTERING 287

fffi»
mam
: .. I £^a
Fig. 554. Fig. 555. Fig. 556.

Fig. 554. Gothic letters in relief, Spanish, 14th or Fig. 555. Incised letters from the Forum at Rome.
15th century. Fig. 556.Elizabethan lettering from an incised
inscription at North Walsham, Norfolk, England.

English sycamore
Fig. 557 (left). Panel in
(harewood), about 12 x 16 in (30 x 41 cm), has
incised lettering combined with a trenched low-
relief of a bird impaled on which also
a thorn,
provides an initial letter C. Thorn grows from a
Celtic interlaced potted-tree design forming the left
border. The alphabet is Celtic, with some additions
to make it understandable today.

288 HOW TO CARVE LETTERING

 Fig. 558 (right). Serifed and weighted
letters provide a pattern for clay
impressions. Letters must have sloping
sides to pull from the clay. Wood is white
pine, and overall size is 2 x 7V2 in (5.1 x
19 cm).

simpler ones are: The lettersand require i 1 that the carving might well be meaningless
only Vi m and w
space, while the letters to most people, and the legend itself should
require Wr, a punctuation mark requires Vi, be included. This suggested that the plaque
with a single space between words and at take the form of an illuminated manuscript,
least a double space between sentences. with the bird as the ornamental initial. It
Letters that are very boxy, like capital H, seemed advisable to include some other
need V2 space between, but rounded ones decoration for the "page" as well, so the
like O, P and Q can be crowded closer to idea of including a side band combined
adjacent letters. Letters like o and c actually with the thorn branch was born. For-
look smaller in a line of type than do many tunately, the ancient Celts were fond of de-
others, so they can be made slightly taller. signs of vines growing from pots, so the
A letter like t, particularly a capital T, can be branch could simply be an extension. It
crowded slightly closer to adjacent letters could also incorporate some of the complex
like o or a because of the projecting crossbar patterns the Celts used in the bird itself, so I
on top. This is also true of the letter f on its braided the extended tail.
right side. Interline spacing can vary
widely, from one-half the total line width to Pick a simple alphabet
more than twice the line width, but line Pick a simple alphabet, at least initially.
spacing should be widened as line length or Gothic and flowery lettering is not de-
letter weight increases, for ease of reading. signed for the carver but for the penman
There are many other rules, some of and and most woods won't take
illustrator,
which will vary with the particular alphabet the detail, even if your eyes and tools will.
being used. For example, in the large And incise your lettering, unless you have
plaque pictured (Fig. 554), the t, 1, and f are endless time and patience. Incised letters
special forms requiring a full space in can be tinted easily for legibility, by simply
width. My best suggestion for the beginner putting on a stop coat of varnish and flow-
at carving letters is to use a simple sans serif ing a paint or stain into the lettering then
alphabet. Gothic, script, italic and archaic wiping off the excess as a scrimshander
alphabets are much
harder to carve well. does on ivory. (If the surface of the piece is
There are occasions when all these sug- tinted by the coloring, it can be lightly
gestions must be abandoned, as in design- sanded to clean it up, but you can't do that
ing and carving the legend of the bird with raised lettering!)
(Fig. 557). This is the old Celtic story, so it Because thin plastic sheet can be molded
seemed appropriate to design it with an to almost any form and will pick up even
alphabet from The Book of Kelts, and to use a surface roughness and grain lines, some
decorative band from that book as well. carvers have had commissions to produce
My first idea was a simple carving of the patterns for such work. These patterns are
bird suspended from a thorn, the whole often in woods that will display a decided
composition "white on white" except for a grain, like oak, particularly with a little
vermilion drop of blood. Then I realized sandblasting after carving. Sign carvers

PICK A SIMPLE ALPHABET 289

 Fig. 559. Simple incised and serifed
lettering, with weighted verticals, forms
the first line of this desk block. Second

IDJO NOTMDNG and third lines are simple incising. All

lines are filled with pigment, after which
the surface is sanded and then matte-
varnished.
. . . and nothing will be left undone
(CHincjc proverb)

also make use of this characteristic of wood, tally or diagonally, but the calligrapher in-
sandblasting their lettering after comple- terlocks them in one way or another, even if
tion to give it a weathered look. It is also he or she must modify the letter form to do
quite common to batter the sign a bit with a it.

chain or other flexible but hard object to add

to the weathering, as well as to do some Lettering an award panel
scorching with a blowtorch (which inciden- Awards of one kind or another lend them-
removes burrs and feather edges, and
tally selves particularly to woodcarving, and can
makes sanding unnecessary). range from a simple shaped plaque for a
The "MDA 7" shown here (Fig. 558) is in background to something that includes
this category.It was produced in white pine likenesses. Almost always, however, unless
with raised and serifed lettering to serve as the award incorporates an engraved plate,
a pattern in clay or Plasticine®. Because it some lettering will be required, and some
was to be applied directly to the material, research will be necessary.
which had to read correctly, the pattern had This example (Fig. 561) is one of the more
to be in reverse and also had to have slightly elaborate panels I've done, presented to a
sloping sides so it could be withdrawn after man on his 55th birthday. The client sug-
it was pressed into the material. gested the general form: an indication of
Another problem that you may face on the subject's college background, indicated
occasion is to produce a monogram. This is by initial letters and mascots, and his pro-
usually composed of three letters, but may fessional life to date.
be two or four, or even more in the case of a The first step in designing such a panel is
company or an individual who carries a to do the research. In this case, I had to find
"Junior" or "III," for example. The simplest out the shape of the Princeton letter P, the
approach is to make the letter of the Chris- Columbia letter C, and the New York Uni-
tian name dominant, with the other two versity letter forms as well as its symbol. All
laced over it. Because so many letters in the involved telephone calls to the college of-
English alphabet have vertical and horizon- fices. decided to
To simplify the design, I

tal lines, this is relatively easy. A dominant use only the heads of the Princeton tiger
circular letter like c or o can enclose the and the Columbia lion, and only the torch
others, or one with a space at top and/or from the circa-1952 NYU symbol, an Olym-
bottom, like m, n, or w, can do the same. pic runner carrying a torch. (NYU and Pru-
Sometimes one letter can serve to com- dential now use stylized symbols, but the
plete another, as in the initials AGA, in torch I carved, as well as the Prudential
which the G can tie together the two A's, Insurance Rock of Gibraltar, are both older
one over the other, by forming the crossbars —
designs and were in use at the time my
as it cuts through both. Of course, modern subject was there.)
printers avoid the entire problem by put- An essential in the design of an award,
ting the letters in order, vertically, horizon- unless the overall shape is to be symbolic, is

290 HOW TO CARVE LETTERING

Fig. 560 (above). Lettering was incised with a V-tool on this maple panel, which was then sprayed with two
coats of matte varnish. The varnish acted as a stop when stain was put over the surface and then wiped off.

Fig. 561 (below). Finished panel, showing elements glued in their proper locations. All but Goldilocks are
mahogany; she is pine. Finish is matte varnish and wax. (See Figs. 629, 630, page 318.)

SIGMUND WW.S.ACER
OCTOBER *6,t»25-

AN AWARD PANEL 291

 1®4&m®mm 1234567890
ahrfipfigilriCmprstmtiuxyx
Fig. 562. Engraver's Old English.

Fig. 563. So-called Modern initials.

ABCDEFGHIJKLMNOPQRSTU
VWXYZ& 1234567890$
abcdefghijklmnopqrstuvwxyz
Fig. 564. Caslon Old-Style alphabet, the basis for
numerous modern type faces.

ABCDEFGMUJKIMNOP
QRSTUVWXYZ&
abedefghijhlmnopqrstuv
tvxyz 1234567890$
Fig. 565. Ultra-Bodoni Italic; note slant and extra-fat
letters.

ABCDEFGHIJKLMNOPQRSTUV
WXYZ& 1234567890$
abcdefghijklmnopqrstuvwxyz
Fig. 566. Sans Serif, which must be carefully spaced
between letters for ease in reading.

292 HOW TO CARVE LETTERING

the shape and size of the plaque, because the college initials, which conform to their
other elements must be fitted to it. I had in style. Incising serifs is troublesome, par-
mind a rectangle of fairly conventional pro- ticularly when the lettering is only A in
l
(6.4
portions, and was fortunate to have saved mm) tall. Also, all lettering was done in
the top of a small stand. It was glued up of 1- capitals, to get maximum size for carving,
in (2.54-cm) maple, 13 x IT'/z in (33 x 45 Letter carving was done with the V-tool and
cm), with rounded corners and fluted a light mallet; this gives much better control
edges, so it required only top sanding to be than carving by hand. It was necessary in
ready for use. I planned to incise the letter- some instances, such as periods and short
ing with a V-tool, and trials on the back of lines running with the grain, to make stop
the top showed that it could be carved with cuts with the knife, and in a few instances
a good, clean line, providing, as always, the to finish an angular meeting point with the
V-toolwas sharp. knife, but, in general, lettering could be
The next step was to lay out the plaque done quite rapidly by this method,
and size the elements. The principal em- When lettering was completed, the panel
ployer of the subject turned out to be Bear, was fine-sanded to remove burrs, then
Stearns & which immediately sug-
Co., given two good sprayed coats of satin var-
gested another symbol in rebus form — nish. This provides both a surface finish
back view of the three bears and their vis- and a stop for the "antiquing." It is very
itor, Goldilocks. In an animal anatomy important that the lettering be fully var-
book, I found a head-on view of a Malay nished, or the stain will run into the grain at

tiger and a practically tail-on view of a bear, the sides and discolor the surface. (I had
My family crest is a lion head with tongue this problem in one or two places, which
out, and this seemed appropriate to the later required scraping of the surface in
occasion because the subject had attended those areas and respraying.) I used, inci-
Columbia, but was forced to leave after a dentally, a German Beiz sal-ammoniac,
few months (as a result of his father's water-based stain, walnut in color,
death), so did not earn his intended law Once all done, the emblems, sepa-
this is
degree there. (Hence the lightning bolt rately spray-varnished, are glued in place,
and the displaced final letters of LLB.) the assembly given a third coat of varnish,
To lay out the bear group involved draw- then two coats of wax or clear shoe polish,
ing silhouettes of the bear pose in three Sign it, add ring hangers on the back, and
sizes and shuffling them one over the other it's ready to go.

to get a shape that fit the space and still

emphasized the "bear sterns." Goldilocks
was sized to fit. A lettered panel %
To get contrast with the maple, I decided A valued client phoned in desperation.
to make parts of the units three-dimen- Her son was in a dramatic production at his
sional. This would avoid a confusing welter school, and the cast wanted to reward the
of incised lines and lend some depth to the three teachers who had helped with prepa-
panel. Also, I could use a contrasting color rations for it. The play was "Godspell." Only
of wood — in this case mahogany scraps two days were available in which to pro-
who wouldn't really
except for Goldilocks, duce the awards, and the budget was lim-
have been appropriate in a dark wood. She ited, so elaborate designs were out and re-
is of pine. The heads, bear group,
torch and ligious motifs were considered inappropri-
Goldilocks were blanked out with a coping ate for the recipients,
saw, then whittled. My suggestion was that we award let-
Lettering was laid out as simple unserifed tered plaques that could be hung or placed
letters, except for the subject's name and on a table as desired. I had incising in mind

A LETTERED PANEL 293

 Fig. 567. Three steps in carving plaques.
Bottom, as routed. Middle, largely set-in
f (note tab end, which provides a clamping
surface during routing). Top, as carved.

Fig. 568. After antiquing, the four plaques in

maple, 3A x 3 x 13 in (1.9 x 7.6 x 33.0 cm).

as being rapid and simple, but the client and background. The roll and
levelling the
wanted raised lettering. I had some pieces the curl were done by hand, as was textur-
of maple from which I could squeeze out ing of the background with a small gouge
three % x 3 x 12-in (1.9 x 7.6 x 30.5-cm) cutting random scallops. (I use a plastic-
blanks, so I designed a sort of scroll with 2- headed light mallet for setting-in and much
in (5.1-cm) block capital letters. This left of thiswork; I can control the tools better
room for a roll at the left but merely a curled this way than with the thrust of an arthritic
edge at the right, particularly after a second shoulder.) The numerals '82 were placed
telephone call that increased the number of one above the other in the space created by
panels to four and used the last suitable the final L, and the surface matte-var-
piece of maple. nished. Then walnut stain was brushed on
I decided to make the letters Va in (6.4 and immediately wiped out, to create an
mm) deep and to rout the backgrounds as —
antiquing effect and we were done.
much as possible. This was followed by set- The plaques were a great success. In fact,
ting-in around the letters with small chisels the director of the show, another teacher

294 HOW TO CARVE LETTERING

who had been rewarded with a pair of tick- created by the Then the client had a
first L.

ets to a Broadway show, expressed regret —

further idea could make a small pendant
I

that she had not gotten one. My client, who with the word "Godspell" on it as well? The
is very fast on her feet, explained that a result was a holly carving with curved top
special plaque was being made then
. . . and the word "Godspell" angled across it
confessed to me what she had done. At the and "1982" incised in the upper right-hand
same time, she asked if I couldn't make corner. They were received with acclaim.
another plaque as well as a remembrance End of commission.
for her son, who had starred in the school Simple lettering can solve many prob-
production. lems. I would suggest, however, that it be
There was no maple of proper size, but I done in a fairly hard and dense wood to
found a piece of cherry and one of oak, and reduce the problems of splitting. Incising
made slightly more elaborate plaques, the letters with a V-tool is faster, but raised
one for the son including a star in the space letters are more dramatic.

SIMPLE LETTERING 295

 19

You Can Whittle Ivory

That you can find it

is, if clude some of the core material. This is

Man has revered ivory as a symbol of slightly yellow, with a honeycomb or peb-
opulence, purity and innocence for over bly pattern, because that's where the blood
15,000 years. Ivory is still perhaps the finest vessels and nerves were. (The polar bear is
carving material for miniatures, but it is mounted on the jaw end of such core mate-
unlikely to remain that much longer, for rial, which is quite dark there.)
now all of its sources are numbered among Elephant ivory also tends to separate as it

the endangered species. grows older, just as some woods do, par-
All ivory is essentially like your own ticularly if the carving is kept in a thor-
teeth. has an outer layer of very hard
It oughly dry place. Large blocks of elephant
enamel, then a much thicker layer of den- ivory are sensitive to sudden heat changes.
tine, and finally a core of much softer mate- A high-intensity lamp too close to the
rial that looks like slightly discolored clot- block, too much concentration with a
ted cheese pressed solid. Usual practice is power burr or a grinder, or even sudden
to chip or grind off the enamel, both to change from a cool storage room to a warm
remove surface defects and discoloration room may cause cracking. (Also, carving
and to expose the softer and whiter den- ivory with power tools may cause burning,
tine. This is not necessary, however wit- — and is likely to cause a smell like that of old
ness the low-relief animal poses I carved in bones burning.)
the enamel layer. Enamel is harder to carve The usual way to work ivory is to saw a
than dentine, but a design of any depth blank, then to shape it as much as possible
goes through it anyway. with drills, files and sanding sticks. But
Ivory has so little grain that this is unim- surface designs must be put in with an
portant. It has very little tendency to split, edged tool. For lines, an engraver's burin
although old ivory does tend to separate in will work, as well as a V-tool or veiner if the
layers as it dries out. Thus, for example, my piece can be securely held. (If the tool slips,
carvings of the polar bear and puffins (Figs. you'll find that your hand is much softer
569, 570) are mounted on the butts of wal- than ivory.) A hand vise or a sandbag may
rus tusks; partially separated portions of be helpful, depending upon shape. But I
the dentine layer I sawed through and split find a pocketknife works very well, or a
off.On a conventional walrus tusk, the den- hook blade, such as is used for leather. The
tine layer will be perhaps /s in (9.5 mm)3
included angle of the edge should be in-
thick at the base and go clear through near creased, however; sharpening must be fre-
the tip. Larger pieces, like the walrus (Fig. quent. Even then, chips are appallingly
571) are carved of cross-slices, so will in- small.

296 YOU CAN WHITTLE IVORY

 POLAR BEAK
Fig. 570.

SKscitd f iqurt*b«|ow
Insert wory kcjs art in mr panal

^\fvft\WM-\im J.
panels or
d
ARCTIC lay«rs

of «rving

PUFFINS- lvo,y

For habitat mount LLAI lOnLLL Frames a 3-pan«l scene m»ide China Ivory

Fig. 569 Fig. 571.

PLAYFUL WALRU5
(from Shishmar<zf)
Ivory

OWL CHARM FROG BIRO CHAPnM KJNAMRTESGULL

Note: All pieces above are walrus ivory Fig. 573.

CARVING IVORY 297

 Polishing must be done very carefully to quently. Files, rasps, abrasives, saws and
avoid scratching and dulling the surface as drills are much more and
often necessary,
well as blurring sharp edges. Ivory is such modern rotary tools like hand grinders and
an intense white that blurred edges tend to flexible-shaft tools are much faster. The
disappear, leaving nothing visible but an bone carvings pictured here were done
amorphous blob. Very fine sandpaper or with a flexible-shaft tool.
emery paper, preferably worn, can be used Eskimos carve whalebone upon occa-
for rough smoothing, but for finishing, sion, and various kinds of stone, prin-
something like jeweller's rouge and a cloth cipally greenstone, a form of soapstone (on
is better. The final polishing, at least among the East Coast, gray soapstone was more
the Eskimos, with paste silver polish.
is common), and Alaskan jade. Whalebone
you will probably find
After polishing, and soapstone can be whittled easily, but
that your carved lines are not visible at a tend to be brittle. Coastal people of India,
short distance. The Japanese and Chinese Africa, and the Americas have all carved
speed up the normal antiquing process (de- shell, as well as using pieces of it as inlays in
position of dirt in crevices) by coating the wood one tribe in Mexico even
carvings;
carving with strong tea or bathing it in makes mosaics by careful placing of aba-
smoke, then wiping it off. A light-colored lone shell in a pitch base. The composition
wood do the same thing, but be
stain will is inlaid in wood and may be a cross, or

sure to work only small areas and wipe off even a miniature violin or guitar.
the surface fast! This leaves darker tones in My intent in mentioning all these mate-
the crevices. It is also possible to draw in rials is merely to suggest options.
lines with India ink or to fill grooves with
ink or pigment. This has a tendency, how- Bone is cheaper than ivory
ever, to give the carving a harsh look. A Animal-bone carving is relatively little
lighter-colored ink of the transparent kind known in the United States, although it has
will work better to define detail carving or been done for centuries by primitive peo-
important lines, but even this must be used ples elsewhere in the world. The Balinese
with care. In scrimshaw, of course, which is are particularly adept at it, carving cow
really a form of etching, the technique was shoulder and leg bones into intricate, usu-
to smoke or otherwise darken the surface, ally Hindu, designs. Other South Pacific
then scratch the design in with a knife peoples have carved bone some of it —
point, sharpened nail or awl, fill in with human, regrettably. Mexicans in and
ink, then sand or scrape off the surface around Guanajuato make a variety of bone
discoloration, leaving the lines filled. This carvings from cow bone, ranging from stat-
is possible because ivory does not absorb
uettes to small finger rings and pins. It is
the ink, as wood would, so it has no ten- likely that American carvers will be doing
dency to blur or spread. But beware the more carving of bone as the controls on
mistaken line! The ink will reveal all lines ivory increase, or the supply itself dimin-
and depressions. ishes because the animals that provide it are
hunted to extinction. Even the Eskimos in
Bone, stone, shell and nuts Alaska, who still have access to walrus tusk
Once possessed of tools, man carved (at inflated prices), are carving whalebone
anything that came to hand, from stone on occasion.
and shell to bone, horn, nuts and bark. The Such bone as I have carved cow and —
principal problem with most of these mate- —
sheep is harder than most woods but
rials is that they are harder and more brittle softer than ivory. It can be whittled with a
than wood, so tools must have a greater knife, or carved with chisels if it can be held
included angle and be sharpened more fre- (beware of hand-holding when you use

298 YOU CAN WHITTLE IVORY

 Indian Oc«an trochuso* top
Fig. 574. .stall. Iridescent. V-arooveci

nciia & Africa

V'cuts in whalebone

WHALE
Alaska jade
Fig. 576.

Fig. 578

"•Chas Kokuluk

I IUjia Ua ~6reen soapstone FISHERMAN" Green 5oapsW

Fig. 580. This fishpin, an example of power carving

of buffalo bones, is by Ruth Brunstetter. Shaping is

somewhat restricted by cutters available, but the

material takes well to polishing.

BONE, STONE, SHELLS, ETC. 299

Fig. 581. Greenstone, a form of soapstone and relatively soft, is found in Alaska and has been worked there
by both Eskimos and Indians. The musk ox at the right and the bear at the left are probably handmade, but
the Eskimo with a fish (middle) is probably a product of a "factory" in Seattle, which imports the stone and
exports "native art" for tourists in Alaska.

chisels — they may Bone is also more

slip). wood with a pocketknife or simple wood-
open-grained than ivory and more brittle, carving chisels (except that edge angle
so it is a natural candidate for rasps and files should be increased), while the hardest can
and power grinders. It can be polished like be cut only with diamond.
ivory, and painted or tinted. I have whittled soapstone, pipestone and

onyx. It is a slow process involving fre-

Carve stone and shell quent sharpening of the knife. Pipestone,
Many kinds of stone have been carved incidentally, one of a variety of stones that
is

by man, ranging from the soft ones such as are softer when first mined and harden

soapstone, onyx and alabaster through with exposure to air. It is dense and fine-
harder ones such as pipestone, jade, mar- grained, and will support a great amount of
ble and granite on to very hard ones that detail.
include emerald, ruby and sapphire. The The Turks seem to have a practical mo-
soft stones can be carved or whittled like nopoly on another and quite different pipe

Figs. 582-584 (above and on facing page). A

man's bracelet (wood with bone appliques), a pin and a carved
eagle, all in buffalo bone by Ruth Hyde Park, New York. Mrs. Brunstetter, an artist, took up
T. Brunstetter,
the mounting of animal skeletons some years back, and now has an extensive collection. This bone is from
a friend who has a small buffalo herd in New York State.

300 YOU CAN WHITTLE IVORY

mineral, meerschaum, because they control
its source — Asia Minor. It is anhydrous
magnesium silicate, soft, porous, fine-
grained and but light enough to
clay-like,
float in water, and
carved into the finest
is

and most expensive pipes and cigarholders

in the world.
Shell is an animal product rather than a
mineral, but it carves quite similarly and
also has a similar brittleness and lamina-
tion. I am
speaking primarily of marine
shells. The horn is boiled or otherwise
heated, then carved while hot; it is brittle
when cold and dry. Heat was obviously
involved in the Indian shaped pieces, such
as the lion (Fig. 600) decorated later by
Fig. 583.
scratching so that the torn surface of the cut
shows almost white against the darker
horn. In Mexico and India, small in-the-
round pieces like pendants are carved from
the thicker horn at the tip. The American
Northwest Coast Indians shaped moun-
tain-sheep horn into spoons, some with
elaborately carved handles. It's enjoyable
if you can find the horn.

Fig. 584.

BONE, STONE, SHELLS, ETC. 301

 Figs. 585, 586 (above and
right). Soapstone and pipestone pieces
by Charlie Reed, a Cherokee. The
pipestone piece above is only 1 in (2.54
cm) long but contains nine units, in
which can be seen a large frog
swallowing a human head with a
smaller frog atop it. The soapstone
piece (right) is lYt in (3.8 cm) wide and
has a number of figures. Shown here Fig. 586.

is a face and body with upraised arm,

which on the back is also the thumb of
a hand. Also shown are a bird head, a
turtle and a crab-like figure along the
bottom.

Fig. 587 (right). Simple red pipestone

carving by S. Toomi, a Cherokee, is about
2 in (5.1 cm) long and shows an Indian
girl bathing beneath a waterfall.

302 YOU CAN WHITTLE IVORY

 Figs. 588-590 (above, right and below). Two Turkish
meerschaum pipes purchased in Jerusalem. The
white head of the chieftain at right is much more
detailed, and the meerschaum is much higher
grade, so it cost five times what the other one did.

Fig. 589.

5 HE IK HEADS rw cUm S Tu^s

I |cec5cndum hydrous magnesium ulicaU, na
)
Bottom enoraving
soft whita clay-like mineral
(
from Asia Minor. It is

bo liqht if will float

Fig. 590.

STONES AND MEERSCHAUM 303

Fig. 591. Cameo shell with a finished
cameo ready to be cut out.

Fig. 593. Two shell figures from Italy. The larger appears
tobe the core of a conch shell; the small head of a girl is
from a cameo-shell core.

Fig. 592. Pendant and cross from Mexico, with shell

fragments set in a black base and polished. Wood in
pieces like this is primarily a backing. Fragments
are cut with coping saw and files.

Alaskan jadeite whale and Billiken

Fig. 594 (right).
bolo slide. The Billiken has a gold nugget in his
navel; rubbing it is supposed to bring good luck.
The small bird at right is of wood.

304 YOU CAN WHITTLE IVORY

Figs. 595, 596 (aboveand below). Tiny fish, frogs, a cat and other pieces carved from semi-
precious stones by Indians in Brazil. The largest is less than an inch (2.54 cm) long.

• ^«S
m •
t

w-i
•Jtt *yA>^
^'*'NLX»* STCCU

STONE, SHELL, ETC. 305

 9BBM

9*u >#&

l
!W5v^

Fig. 597. Two birds and a fish carved from semi-precious stones by Indians in Mexico. The
central bird is about 5/s in (16 mm) long; the fish at right is a fire opal.

Fig. 598 (right). Tiny onyx fruits

and vegetables are on unusual
Indian product near Puebla,
Mexico. Here are bananas,
pineapple, sugar cane, avocado,
apple, pepper and other
examples, shown full size. They
are tinted with dyes.

This double
Fig. 599 (left).
walrus head is in soapstone,
with walrus-ivory tusks. It was
carved in Alaska back in the
Fifties.

306 YOU CAN WHITTLE IVORY

 Fig. 600. Carved and shaped horn lion is typical of fine Indian work in this specialized field. It is

about 10 in (25 cm) long and dark brown, with lighter scratched decoration.

with basket made from separate cow-horn

Fig. 601. Girl figure tip, and horn showing house,
fence and mountain, both from Patagonian Chile.

HORN 307
 Drilled hole length v

Actual jucC Jnl^ran^nqed double doors open to show man inside.'

Oars & rudder assumed^'" 1

3«paraTe wood base

SAMPAN ow a ine Ivory

Figs. 602, 603 (above and below). Chinese

ivory carvings tend to be extremely detailed.
This is complete sampan, with a detailed
a
structure and even passengers, it is about 4 in
(10 cm) long, with W-in (6.4-mm) shutters that
open and close!

308 YOU CAN WHITTLE IVORY

Fig. 604.This walrus tusk, about 15 in (38 cm) long,
was given to me by a friend for experimentation. I
carved 14 animals on it with pocketknife, hook
knife, veiner and V-tool, cutting through the
dentine in each case because I didn't know it
should be taken off initially.

and below). Devil head carved

Figs. 605, 606 (right
from horn in Patagonia, Chile. It has a chain for
hanging.

HORN AND IVORY 309

 Fig. 607 (above). Polar bear and puffins mounted on the butts of an old walrus tusk, which was
laminated and, thus, permitted a front section to be sawed out. The blackish porous central
mound is where the blood vessels meet the solid tusk; the thin upper area meets the walrus'
upper jaw. Puffins are painted with oils to proper colors. Fig. 608 (below). Two cormorant
carvings by Alaskan Eskimos. The taller one is mastodon ivory, and the smaller ones are from
King Island and mounted on a whale vertebra.

310 YOU CAN WHITTLE IVORY

 Fig. 609 (right). Eagle pendant
and earrings for the U.S.
Bicentennial (1976) — again,
whittled.

Fig. 610 (left). Flying goose, from a

laminate of walrus tusk 3 in (7.6 cm)
long, is mounted on music wire
inserted into a California-ironwood
base. The cattail at the base of the wire
is also walrus ivory.

Musk ox and 2-in

Fig. 611 (right).
(5.1-cm)duck were blanks sawed
out by an Eskimo who deserted
them for the pipeline. I found the
blanks in an Anchorage shop and
whittled them on the way home.

IVORY 311
 From St. Lawrence Island, Alaska, comes this ivory assembly, with
Fig. 612 (above, left to right).
a 2-in (5.1-cm) Eskimo drawing a red-tinted sledge of walrus meat. Both are mounted on a piece of
fossil ivory 6 in (15 cm) long.

Fig. 613. —
The Japanese have long produced netsuke small pieces of wood or ivory once used to
pull the drawcords on purses men carried in their kimono sashes. Though many are now made
primarily for well-heeled American collectors, they are delightful miniature in-the-round
subjects. These are ivory.

312 YOU CAN WHITTLE IVORY

 Appendix I

Belt buckles

Fig. 614. Varied buckle-back arrangements by John Phillip include soldered clips on stainless (top
left)and brass (lower left). At upper right is a clip secured with staples made of 1-in (2.54-cm)
bent brads. At lower right, the clip has been glued into a groove. (Neither of these has a backing
of metal.) At top center is a two-part clip, while at bottom center the backing of thin stainless has
been crimped like a bezel around the wood front. Here, a separate pin and clip are soldered to
the backing.

Phillip

0. 1/ "
Bend tip back 90H
]

l 5olcter IS
MP|
Bend up ^\ to clear bdt
fe h
UrfrrZ"Wt,24"*rri

N«us1adt
F^R
jC\\p is beltvndth ft" inside, /^i wire

(J
Pin is /i'lonq wift rounded
°] top. #wi« Fig. 615 (left) How to make belt clips

~=" Fig. 616 (above) John Phillip's formed clips to

Note qroovts To hold c^lue
fit 1-, IV2- and and 5-cm) belts.
2-in (2.54-, 3.8-
Fig. 615. Joints are soldered.

BELT BUCKLES 313

 Fig. 617. Top buckle is VA x 3% in (4.4 x 9.6
cm), curved, of South American walnut relief-
carved with a buck's head. Upper-left buckle
is redwood burl VA x 2Vi in (4.4 x 6.4 cm),

with chamfering only. One at upper right is

California walnut burl, 2Vt x 3 in (5.7 x 7.6
cm), with inlaid masks of walrus ivory, hand-
carved in relief. At lower left is Australian
gum, turned and carved to fit a lady's 1-in
(2.54-cm) belt. Lower right buckle is
California walnut, 2Vi x 3 in (5.7 x 7.6 cm),
with Indian sun design of darkened grooves
and gold-stone insert.

Fig. 618. An elaborate clip, hinged

in a soldered-on socket to give
The pin is
greater flexibility.
soldered on separately. Face is
walnut, incised with a simple
initial.

314 APPENDIX I
 Fig. 619 (left). "His" and
"Hers" matching buckles of
walnut, curved, with inlaid
stainless initials. By John
Phillip.

Fig. 620. This walnut facing is carved with a trenched

low-relief prairie dog I copied from a photograph.

Fig. 621. More walnut buckles by John Philip. Inserts are brass for upper one and
steer head, stainless for fish.

BELT BUCKLES 315

 Small pieces
to

r
Fig. 622. These silhouette pins of 3/i6-in (4.8-mm)
boxwood are deeply carved and finished in clear
lacquer with a shine. They are relatively
inexpensive and quite modern in styling. These
and other pieces on these two pages were made
in Japan.

Fig. 623.Japanese or scarlet maple provides the

material and the design for this 2%-in (7-cm)
turned box, with all-over design on top. It is
from Miyajime.

minimalized
Fig. 624 (right). Torii, or gate, against a
scenic background adorns the face of this rice-serving
paddle of a wood like our basswood. This carving is on
a 4 x 5V2 in (10.2 x 14.0 cm) surface, and overall height
is about a foot (30.5 cm). The mountains and buildings

are merely suggested, while the torii is detailed. No

color or shading is used.

316 APPENDIX I
 Fig. 625 (left).The short-handled tea scoops,
used toput loose tea into pots, and other small
pieces may be stained and carved afterward so
the base color of the wood contrasts with the
stain, or they may simply be clear-lacquered.
The lion-head spoon at left and the larger tea
scoop at right have no finish, while the tea
scoop and butter spreader at bottom are red-
lacquered in the traditional way.

Fig. 626. These pendants include a 2Vi-in (6.4-

cm) disc of a stylized thistle (tinted), another
with a pert girl face and flower, the third an
excellent stylization of a Samurai bust (double-
sided) with separately carved legs hinged inside
the "waist,"and a small hammer suggesting the
lucky god, Daikoku. Fig. 627.The frog and turtle are significant to
the Japanese, the horse to the Chinese. Here are
small, lucky pieces, the frog and turtle at left
only about Vi in (12.7 mm) long, thonged for
attachment, plus a stained cryptomeria frog at
top and a blocky one on its own base below. The
boxwood horse is about 2 in (5.1 cm) long, and is
Chinese.

SMALL PIECES 317

 ^

DU5DNG BIRD <—

BEAR Charles Church
CUB

Ethel HoqsT

LAMBS Hape 6 ro wn

DUCKLING Hop. Brown HOUNDS Jack Hall

Fig. 628. Simplicity in animal carvings, typical of the John C. Campbell Folk School, Brasstown, North
Carolina.

Templates can be cut from heavy paper to

Fig. 629 (left). Finished emblems. These were glued to a
Fig. 630.
size elements and test their locations in an applique maple panel carrying incised lettering to identify them
carving. This was particularly important in posing the (Fig. 561).
three bears and Goldilocks, and in checking that the
torch was not too large in an award panel (Fig. 561).

318 APPENDIX 1
Figs. 631, 632. Farrier's shop and
below, sculptor's house and
travelling magic show —three of a
number of models made from
hollow tree trunks by my grandson
Robin at age 14-16. Scale is less
than 1:12.

Fig. 631.

Fig. 632.

SMALL PIECES 319

 Fig. 633. The Sands barn after re-erection. It is 24 x 41 ft (7
x 12.5 m) and 16 ft (2 m) high at the eaves, with a 45° roof

pitch. Of the Dutch type, it was built about 1690.

5HINGLING

SPLITTING SHINGLE5

Figs. 634, 635. A 9-in model of the barn above, carved in

a left-over portion of a support timber, showing
shingling, froe-splitting of shingling (left) and shingle-
shaping with a drawknife (right). Figures are V* in tall.
Trim is pieces of the original pine, hardware hammered
SHAVING SHINGLES from soft iron wire. Shingles are Vt x 3/g in-pieces of
cedar carbon-dated at 8,500 years old, plus or minus 500.

320 APPENDIX I
Skate history decorates
a Christmas tree
The particular group shown below was a
commission from a lady who is a skate
dancer, who has four sons who play
hockey, and who wanted something decid-
edly different for Christmas-tree decora-
tions. The people were made in basswood,
jelutong, or Alaska red cedar and tinted (Tai 8ab\!oni& & PAIR SKATING
Randy Gardner U5.
with one pair of skates is
oils; of mahogany, '6 K\
the other of cherry; all were finished with

flat varnish. Skate runners —

and in the case
of modern skates, the entire skates —are cut
from thin metal and shaped by filing. I used
aluminum for most, but brass shim stock
for two tiny pairs, just for variety.

PAIR SKATING
(Inna Rodnma & Aleksandr
Zait s «v, USSR, 1976 cWpiona)

Fig. 636.

wears vintage costume

Fig. 638 (right). Frisian girl
and Wichers de Salis skates, an old type with strap-
on wood body and inserted metal blades. Figure in
tinted basswood, about 5Vi in (14 cm) tall.

ACTION FIGURES 321

 Fig. 639. Frisian
boys in historic
costumes, each of
tinted one-piece
cedar. Skates had
strapped-on wood
bodies and
inserted blades.

Figs. 640, 641.Crossed hockey sticks with puck (left) are 4 in (10 cm) long; puck is 5/s-in (16-mm)
dowel. Sticks are varnished and trimmed, with tape-wound handles. At right, for contrast, are
—
crossed "shinney" sticks whittled from twigs, with miniature soup can for puck the poor-boy
version of hockey.

Fig. 642. Four pairs of graduated-size miniature

hockey skates and a pair of ladies' dancing skates,
the longest about VA in (4 cm), whittled from
basswood and tinted. Drilled holes in upper shoe
cuffs are laced with thread-braided laces, which
provide a method of hanging as well.

322 APPENDIX I
Fig. 643. Ladies' skates circa 1910 came high above the ankle. Beside them is a pair of
all-wood skates, the commonest homemade farm variety both here and abroad for
centuries.

Fig. 645. Three pairs of miniature skates about 2 in

cm) long include two of bone, showing earliest
(6
single lacing and later multiple-type. At center are
antique adjustable-sledrunner beginners' skates
with wood body and metal runners.

Fig. 644. The Hollandse (Dutch) skates at left

were among the fancier varieties, with ankle
thong and double toe-stirrup. These are
cherry.

SMALL PIECES 323

 OLD BOOT CU5A- many sKdpas)
Fig. 647.

Fig. 646. First skates after the bone ones were

simply blocks of wood held on with thongs.
The wearer pushed himself along the ice
with a pronged pole (center). Legend has it
that an error led to the first skates with a
metal plate on the edge, which reduced wear
and friction and made skating as we know it

possible.

Figs. 648, 649. A rather elaborate skate used well into this century is the Frisian (left), with wood
body and metal runner. Straps formed a sort of sandal when laced on. These are mahogany, with
gilt beads. Shoe horns at right in the shape of shoe soles are of maple, with incised lettering.
About 6 in (15 cm) long, they are mementos for a skaters' committee.

324 APPENDIX I
Figs. 650-652. Here are whittled boots in various sizes, two with mice peering through
holes in the soles. The small ones and the loafers at top and above were made into
pendants.

SMALL PIECES 325

 Fig. 653 (left).This Frisian girl of about 1880
wears Wichers de Salis skates (runners inset
aluminum). She is about 8 in (20 cm) high and
has a fluted skirt. Skate details are whittled.

Fig. 654 (above). Frisian boy of the same

period, wearing Doorlooper (rink) skates of
aluminum, has suffered a mishap. He is about
6 in (15 cm) tall and is hung from the upper
hand. His jacket buttons are copper nails.

Fig. 655. Frisian boy (at left), companion to the

girl, wears Outerkirk skates of aluminum and
has copper tacks for buttons. He is 8 in (20 cm)
tall. All three of these carvings have been

enlarged from mobile elements on preceding

pages.

326 APPENDIX I
Figs. 656, 657. Girl and boy are enlarged from
a skating print of about 1860 set in Central
Park, New York. She 9 in (23 cm) tall, he 10
is

in (25 cm). His cap tassel is whittled separately

and inserted for strength. Skates are
aluminum.

Fig. 658 (right). Formal skating couple are also

enlarged from an old skating print. Man's coat
buttons are round-headed brass nails; lady's
muff is appliqued to get desired grain. Overall
height of the pair is 12 in (30 cm).

SMALL PIECES 327

 —

Circus wagons and carousel horses Models were carefully scaled from the orig-
A number of carvers have been making inals or from photographs over a 25-year
models of circus wagons and carousel period, largely as the hobby of one man,
horses in recent years, recalling the golden with the assistance of four others at various
age of the circuses in America from 1870 to times. It includes five bands; 53 band-
about 1915. In 1880, there were more than wagons, tableaux and cage wagons; 400
50 circuses on the road, each trying to draft, riding and driving horses; 90 ponies,
outdo its rivals in the splendor of its parade, mules and donkeys; 30 elephants, 33 cam-
which was relied upon to attract crowds to els, 14 zebras, 80 animals in cages, 60 lead

the circus grounds. Larger circuses had ex- animals, 20 clowns, 83 musicians, 170
tremely ornate and elaborate wagons, spec- riders, and over 130 other personnel. Wag-
tacles and regalia for the parade, at least one ons are hand-carved and painted; no two
wagon reputedly costing $40,000 alone in horses are alike. Pictured here are the Old-
those years before inflation. Woman-in-a-Shoe tableau wagon and the
Biggest and most elaborate of the circus- African crocodiles in a tank-cage wagon,
parade models is that at Shelburne Mu- both drawn by buckskin horses, and a
seum in Vermont, which incorporates over group of the carousel horses which are part
300 ft (91 m) of 1-in (2.5 cm) scale models, of the same display. The parade is housed
the equivalent of a 2-mile (3-km) parade in a 500-ft (152 m) arcuate building built for
which no circus could ever mount alone. it in 1965.

Fig. 659. Carousel horses.

328 APPENDIX I
Fig. 660. Wagon with "Old Woman in a Shoe" tableau.

Fig. 661. Circus wagon carrying crocodile tank.

CIRCUS WAGONS AND CAROUSEL HORSES 329

New Guinea pieces are unique
The Trobriand Islands lie perhaps 100 drums, and many small objects that we
miles (160.9 km) north of the eastern tip of would start on a band saw. Also, the carvers
Papua New Guinea, and are part of that usually work with very hard woods like
relatively new republic. They are visited ebony (black, macassar and striped), kwila
infrequently by tourists because they are off (a light tan wood) and garamut (red-

the beaten track, so the natives have not brown).

been strongly influenced by the white man. The carving here is distinctly different
They live as they always have, almost nude from the more familiar work along the
and in grass-thatched shacks, but they pro- Sepik River in Papua New Guinea proper,
duce some of the finest and most original which is more primitive and tends much
wood carvings available. These are made more to the large, somewhat grotesque de-
without power equipment of any sort, and piction of the human face (masks and
include circular bowls, long hollowed-out shields) and utilizes a great deal of color.

DANCE DRUH- Z7"U 9 >ollow. GaramuTO ***** UmW++mm»ym*l*

Fig. 662.

Fig. 663. Elaborate drum of garamut wood is 4 x 26V2 in (10.2 x 67.3 cm), plus the projecting
handle, which is integral. The drumhead is edged by a braided grass collar. Handle
lizard skin
and with varicolored tassels and inlaid nacre on the
collar at right are patterns of incised lines,
collar. The pattern near the head is a pair of snakes in low relief, surrounding circles, two with
nacre inlays, the other two with cat-eye opercula inlays. The maker said the hardest job was
boring the wood end to end.

330 APPENDIX I
Black M*
Lmes white
&«« color <jnj

Fig. 664. Trobriand Island pieces.

Fig. 665. Seagoing canoes are quite large and fitted with outriggers and a woven reed sail. The
formal ones have carved prows (above) backed by a double-eared shield. This prow is IV2 x 8 x
24 in (3.8 x 20.3 x 61.0 cm).

NEW GUINEA PIECES 331

 Fig. 667 (left). The two pigs, one circular in cross section, the
other flat, are of ebony with scroll-carved decoration. The
smaller is about 3Vi in (8.9 cm) long.

332 APPENDIX I
Fig. 668(above left). The two statuettes are ebony, one-piece and I6V2 and 20 in (42.0 and 50.8 cm)
tall.That at left shows two men riding a snake, with a squirrel on top. The second shows three
women graduated in height, stylized, each holding what may be a loop of cloth. There are nacre
inlays where the hands meet the cloth. Fig. 669 (above right). The walking stick at right is ebony,
carved with a series of back-to-back mythical figures. The cane at left is from Palu, Celebes
(Suawesi) and is of macassar ebony, with a dragon's head.

Fig. 670.The two outer pendants, 2V2

x 4V2 in (6.4 x 11.4 cm) and 3Vi x
5Vz in (8.9x 14.0 cm), are variations
of thePapua New Guinea coat of
arms showing the fish eagle and
drum. Both have nacre inlays. The
smaller center pendant has a head
surrounded by tracery. All three are
ebony and are under Vfc in (3.2 mm) at
the edges.

NEW GUINEA PIECES 333

 Fig. 671. Many small objects are
made, usually from ebony scraps.
These two are fanciful, that at left
being a 5V2-in (14.0-cm) female figure
with elaborate headdress. It is
triangular in cross-section, about 3/s
in (9.5 mm) on a side. The larger
figure is a mythical animal with
nacre-inlay eyes.

Fig. 672 (left). with pierced portions is a familiar way to decorate flat surfaces.
Intricate scrollwork
The salad but hard wood, the comb and the lime spatulas or spoons in
set is in a light-colored
ebony. Pieces range from 12 to 16 in (30.5 to 40.6 cm) and are V« in (4.7 mm) thick at most. The
lime spatulas and comb are used on the island; the salad set was made to sell to tourists. Fig. 673.
Coconut shells are made into lime carriers like the two end ones, or small baskets like the one in
the middle. The end ones are scrimshawed and tinted, the middle one only incised.

334 APPENDIX I
 Appendix II

Woodworkers' Conversion Tables

Imperial Metric Woodworkers' Metric Imperial Woodworkers'

inches millimetres parlance millimetres inches parlance
(mm) (mm)

T2 0.8 1 1 0.039 TT
i

"i~6
1.6 n 2
3
0.078
0.118 1
1
i

6
1

8 3.2 3 8
5
_3_
6 1
4.8 5 4 0.157 32
3
1

4 6.4 6i 5 0.196 1 6

h 7.9 8 6 0.236 1

4
I 9.5 '2 7 0.275 4
5
-Z-
6 t
11.1 11 8 0.314 1 6

y 12.7 12i 9 0.353 3

a
14.3 14i 10 0.393 3
1^ 8
3
I 15.9 16 20 0.787 1

1 6
i

T6
i
17.5 171 30 1.181 1A
3
4 19.1 19 40 1.574 1*
13
1 6 20.6 201 50 1.968 1-^
i 22.2 22 60 2.362 2|
5
1

1 6 23.8 24 70 2.755 2f
25i
1 25.4 80
90
3.148
3.542
H
3-2-
2 50.8 51
3 76.2 76 100 3.936 3-^
J 6
1

4 101.4 1011 150 5.904 5H

5 127.0 127
1521
200 7.872 n
6 152.4 300 11.808 n+i
7 177.5 1771 400 15.744 15*
8 203.2 203 500 19.680
9
10
228.6
254.0
2281
254
600
700
23.616
27.552
mA
19-ri

27
11 279.5 2791 800 31.488 311
12 304.8 305 900 35.424 35^
18 457.2 457 1,000 39.360 39|
24 609.6 6091
36 914.4 9141

Note: The imperial and metric sizes given for tools and joint parts, etc., cannot work out
exactly, but providing you work to one or the other there is no difficulty. In the timber
trade it is accepted that 1 in =
25 mm.

APPENDIX II 335
Make your own D-adzes of the modern D-adze, one of several
Carvers in Egypt, almost 5,000 years ago, shapes still in use by carvers in his area. His
are shown in an ancient wall decoration discussion led me to make a couple of D-
reproduced by The Metropolitan Museum adzes, which I have found to be excellent
of Art, New York, already using the chisel, tools, easy to control and rapid in chip re-

mallet and adze. The was like a small

mallet moval. The American Northwest Coast and
bat, and the pounding surface was the butt Arctic Indians use them for carving totem
of the handle, or the chisel was used alone if poles, bowls, spoons, ladles and the like.

the wood was soft enough to permit it. They also use the elbow-type (regular) adze
What is most interesting, however, is the as well, but the D-adze has been favored for
use of the adze, which is relatively un- many years because it is easier to master
known to most American carvers. and control. Blades are made from old mill
In various forms (see sketches), the adze files and rasps, smaller sizes from 6-in (15
was the basic woodcarving tool, not only of cm) files and larger ones from 10-in (25 cm)
the Egyptians, but also of the Africans, and 12-in (30 cm) files. But let Wahnadagee
American West Coast Indians, Eskimos, tell the story:
Polynesians and New Guinea carvers, "Handles can be plain, or quite ornamen-
among others. It is also familiar among Ital- tal, shown in the sketches, and should be
as
ians, but not among the Germans and Eng- made of a hard, shock-resisting wood like
lish. Some years ago, when attempted to
I rock maple. A channel is cut on the striking
buy an adze for demonstration purposes, face (the vertical bar of the D) to fit the
the suppliers in New York were out of stock blade, a section of old mill file or rasp —for
(although several forms of the tool were smaller adzes from 6-in files and larger
shown in their catalogues) and unworried ones from 10- or 12-in ones. The file is
about it, because their specialists felt that bolted in so it has light bearing at the bot-
the adze was much too dangerous a tool for tom towards the direction of impact. Such a
"amateurs." tool just can't be beat for totem carving or
Early adzes had heads of the hardest milling and sculpting of cedar wood in gen-
stone available, and it should be pointed eral. With a little practice, it can do all the
out that they had many applications other shaping of something even as small as a
than carving wood. They were also used for spoon up to the point of final detail. I have
tilling the ground and for squaring timbers; one that is metal except for the grip and is a
the former need disappeared with the de- real work-horse.
velopment of the plow and the latter with Whileuse a hand axe for some rough-
I

the ready availability of planed lumber. ing, I prefer the D-adze because you face
When bronze, and then steel, became avail- the surface you're working on, rather than
able for blades, the adze became a much viewing it from one side. Also, I've always
more productive tool, although it should be made my own tools, many of them from old
pointed out that even in the early days, saw steel. I now have many tools, but I still
work with the adze was often primarily the prefer the old ones, as well as the old ways
—
removal of charcoal the interior shape of a for curing and preparing native woods such
canoe, for example, was roughed out by as cedar. (I make sewn-leather sheaths for
burning. Some adzes had interchangeable all cutting edges for the sake of safety as
blades, others were double-bladed. John well as for edge preservation.)
E. Hendricks (whose Indian name is D-adzes are easy to make to suit the user.
Wahnadagee) of Bellingham, Washington, The only question that may trouble some
wrote to explain to me the making and use makers is how to drill holes in a file or rasp. I

336 APPENDIX II
 Potlatch hone rifHjs

Cord trapping Spirit-helper cr«t-

Split dorsal fry Blow hole;

JO] /UU^

Fluked

Wtalf cr«t^

Fig. 673.
N.W INDIAN CARVING KNIVES

have two methods: On small files, I put a The temper is tested with a file at the
plumber's-torch flame on the exact spot to cutting edge; it should file about like a good
be drilled, and hold it there until the spot axe does. One doesn't want a flint-hard
turns bright red —about 30 seconds. Then I edge, which is likely to shatter or break off.
let it cool in air (don't quench it in water or If the blade is too soft, it can be re-tempered
you'll hardenagain). It will then be soft
it before sharpening. I do that, on the few
enough with HSS bits. If the file is
to drill occasions when it is necessary, with the
smaller, or a fragment for a knife or firmer, I plumber's torch, heating the cutting edge
wrap a wet cloth around the knife end be- untilit is bright red and quenching in bear's

fore heating. [A setup for controlling an- grease or old cylinder oil. (If old cylinder oil
nealing is sketched — Author.] is used —which is more readily available
I anneal larger files or rasps in my trash- than bear grease for most of us —
be sure it is
burner stove, putting the piece to be an- free of gasoline by pretesting a small quan-
nealed on top of the ashes and building my tity of it for flare-up.) Actually, in this case,
regular morning woodfire on top of it. I the blade is slightly case-hardened.
take the annealed piece out the next morn- Some
tribes do not bolt the blade, but
ing before I re-start the fire, and drill as bind on as on the knife pictured. This is
it

before. This is followed by grinding off the somewhat harder to do than bolting, and in
serrations or file pattern, and cutting the my opinion not worth the trouble. It is also
blade to desired length.

Annual hole areas,

I in can or waTar
Sub merge )+j

V ^r Fig. 674.

5IHPLE FILE-ANNEALING SET-UP flf^ rWehir^

D-ADZES 337
possible to install a screw-clamp arrange- To secure a blade into the handle, grind a
ment, but that is usually bulky and clumsy. slot in the handle end, then put epoxy glue

With the bolt method, the holes in file and (I use Elmer's®) into that slot and the slot

handle can be matched, and the only prob- sawed in the handle, assemble in position,
lem is some wear on bolt holes after a lot of and bind temporarily with cord. When the
hard use. By the way, the bolts should be of glue has set, replace the cord with a
the countersunk type, so they don't project rawhide, bearhide, or fishline wrapping.
from the face of the blade. Coat the wrapping with a mixture of two-
I make blades for carving knives from thirds spar varnish and one-third turpen-
worn-out carpenter's handsaws, partic- tine or equivalent. This preservative pre-
ularly Craftsman® (Sears) or Disston 15
vents fraying or chafing. (In the old days,
brands. To use such steel, remove the han- the preservative was a special pitch.) I pre-
dle, then clamp the blade in a wide-jaw fer to sharpen such blades from one side
machinist's vise so about a 3-4-in. (19 mm) only; this lengthens edge life and the tool
width of the blade is between the jaws. cuts more like a draw-shave.
Start at the front or outer end of the saw. The beads and colors on knives and
Now, beat along the blade at the top of the adzes have definite traditional meanings.
vise with a heavy ballpeen hammer. This Black is the decorative color for tools, which
will start abreak along the vise line. Move are not ceremonial. Ceremonial colors are
the saw along a vise width and reclamp, related to the spirit language.Red denotes
then hammer it to continue the crack. The blood, the life and fish.
giver for animals
resulting strip can be ground or broken into Blue denotes the Great Spirit and the Sky
desired lengths and shaped by grinding. People, the Thunderbird's house and other
The toothed-edge strip, by the way, can be spiritual things. Dark blue denotes bravery
made into short saws for rough-shaping and courage; the voice of horror is in its
soapstone (steatite), bone or other carving tone. Green, yellow and brown honor our
materials. The steel can also be formed into Mother the Earth; they suggest gracious
so-called "crooked knives" by beating a sec- giving to sustain life and the rhythm and
tion carefully on and over an iron rod, pipe beauty of growing things. They suggest an-
or mandrel. nual renewal, the chain of life.

338 APPENDIX II
 Handle Wnq\h as desired
Branchvrvq \irnb

Thumb recesi
REGIMR' ADZ & SHEWH
Sewed Wathijj-
Fit WW &
recess to hand

Flat-head bolt* -
&blade
recessed nufj;
5«tma
recess also

Fig. 675. j PLAIN PUGET SOUND

NORTHWEST COAST INDIAN D-ADZES

Sharpening methods eter, with edges of various curvatures and

I will describe one new power-sharpening V's to fit his tools. Some of the plastic discs
method in some detail — that of H. M. Sut- are made very thin to fit inside small
ter, Portland, Oregon, who is an expert on veiners and fluters, so they tend to bend.
the subject. His equipment is relatively in- These are supported near their centers by
expensive and mostly homemade. (You can thin plywood discs. Leather discs are made
buy setups from several makers.) The first of old belting glued together and shaped
and primary machine is a belt grinder with harness tools.
which takes a 1 x 42-in (2.5 x 106.7-cm) Wheels are coated with a very thin mix-
belt and is available from a number of com- ture of tin oxide in kerosene. An alternative
panies, including Sears or Montgomery is to mix the powder with water to which a

Ward. A series of backing blocks is added few drops of detergent have been added.
justabove the table, the shape conforming Another is to use the very fine abrasive
to the sweep or curvature of the tool being used in polishing eyeglasses, or to use very
ground. For rough grinding, Mr. Sutter fine rouge or some other abrasive oxide.
uses a 60-grit belt. He finish-shapes with a Both sides of the cutting edge should be
150-grit, and does final whetting with a 320- polished to a mirror finish it reduces —
grit or crocus cloth. He feels that this pro- drag. The final operation is further polish-
duces a better and straighter edge than ing with a cloth-buffing wheel and tripoli
most people can obtain on handstones. wax. In normal carving of soft woods, the
He produces the micro-bevel on the in- buffing operation will usually keep the tool
side of gouges with a slip, by hand, and sharp. Incidentally, a fine-grit 6-in (15.2-cm)
finishes it with a leather or plastic wheel wheel on slow-speed mandrel will
this
and tin oxide. These wheels are mounted grind straight edges on firmers and V-tools
on a ball-bearing arbor mounted vertically without the danger of burning created by
and operated at 250-300 rpm. He has an the typical high-speed modern grinder it —
assortment of wheels 6 in (15.2 cm) in diam- acts like an old-fashioned grindstone.

D-ADZES 339
 Fig. 676. Commercial belt sander adapted to
include a short arbor that will take a buffing
wheel. It is, in effect, an extension of the belt-
driving pulley.

The necessity resharpening and the

for pensive, easy to use and even to make,
danger of edge-nicking can be reduced by because the components are available in
proper tool care. Keep tools on the bench or hardware stores.
workplace side by side with their sharp To begin with, threaded stock is avail-

edges towards you so you can select your able, usually in 2-ft (61-cm) lengths, from
next tool easily. Store them in slots so their stores such as Sears. They also sell lag
sharpened edges touch nothing, and when screws of various sizes. If you have the tools
you carry then, put them in a roll that available, you can drill and tap the end of a
covers but does not touch the ends. It is piece of threaded stock to take a A- or 5/i6-in
l

advisable to strop each tool after you have (6.3- or 8-mm) lag screw with the head cut
carried them in a roll — in fact, some pros off and the shank threaded. Even simpler is
strop each tool before they use it, as a bar- to get a long lag screw of the desired diame-
ber does; a tool can lose feather-edge align- ter, cut off the head and thread the shank.

ment just from sitting. Keeping tools from Either of these designs can be equipped
rusting goes without saying, but I will say it with spacers cut from pipe ( 3/s- or Vi-in [9.6-
anyway. or 12.7-mm] diameter) washers and double
nuts. The double nuts are necessary to
screw the screw into the wood blank, but
Make carver's screws after that only a single one is needed.
Through all my years of woodcarving, I Beyond that, all you need do is to drill a
have never used a carver's screw; clamps or hole of suitable diameter in your bench or
a wood vise have always served my pur- other work table, and you're ready to go.
poses. Besides, carver's screws are not It is even simpler, in the absence of
stocked by some suppliers and are now threading tools, to buy a lag screw of suit-
very expensive, at least for this one-time able length (about 4 in [10 cm] for the usual
machinist. However, my boyhood friend, 2-in [5-cm]-thick bench top), and simply
John Phillip, now of Whittier, California, use it directly as a carver's screw. If it is too
presented me with several screws of his long, washers can be added beneath the
own design recently. They are simple, inex- bench top.

340 APPENDIX II
 and 679 (below). Leather and plastic wheels (above) are homemade and
Figs. 677, 678 (above)
used on an arbor made by connecting an old washing-machine motor to a pulley-driven shaft, as
shown below. Discs are shaped to fit the interiors of various gouges and the V-tool.

Fig. 679.

SHARPENING METHODS 341

 An adjustable open-end wrench tightens base on small carvings. (As a matter of fact,
and loosens either lag screw or single nut I have seen small German carvings with
on the designs first mentioned. It is possi- integral bases —
say, of a deer or a dog in
ble, of course, to be more elaborate and to —
woodland in which a stump is carved be-
make a wing nut like those commonly sup- neath the animal's body. It is there to cover
plied with a carver's screw, or you may find what would otherwise be a hole from the
a conventional wing nut with suitable carver's screw.) Also, the carver's screw
thread. An alternative is to drill two op- should be inserted in a drilled pilot hole to
posed flats of a hexagonal nut and drive in reduce the danger of splitting, and the
short pins to make a wing nut of sorts, but I screw itself should be large enough to avoid
find it more secure to tighten the screw being bent when it is driven in or under
with a wrench so it will withstand fairly stress of carving. I have found that by drill-
strong blows at the upper end of a blank. ing the hole for the screw near the outer
The depth a carver's screw is driven into corner of the bench enables me to work
the blank depends upon the height of the around the piece well enough so that fre-
blank and the amount of force you expect to quent adjustments of the screw are not re-
exert at the top. Too short a screw will pull, quired. A short carver's screw can also be
especially in soft woods like pine or bass. used to hold a panel for relief carving.
Too long a screw may project through the

Fig. 680. Mr. Phillip made this knife from a cut-off high-speed-steel lathe tool bit. It is
unusual in thatit is sharpened on both sides and on the end, so it can be used as a

chisel. It is similar to a tool the Chinese make for carving ivory.

342 APPENDIX II
Fig. 681.Small carver's screws can be made from lag bolts either by cutting off the head
and rethreading the shank for standard hex nuts (top and bottom) or by using the lag
screw without change. Pipe spacers (top) should be flanked by washers to increase
bearing surface.

Fig. 682.Threaded stock, in this case V2-in (12.7-mm), can be drilled and tapped for Vt-
in-(6.3-mm)-diameter lag screws with heads cut off and shanks threaded. It may also be
possible to get wing nuts to fit. The screw shown was cut in half to make two.

CARVER'S SCREWS 343

More on gold-leafing
Suppliers of gold leaf can provide a sim- A gold-leafed surface is basically ultra-
ple procedure, or it can be done as ex- smooth, though it may sometimes be desir-
plained to me by Gardner Wood, who has able to have a textured surface. Mr. Wood
gold-leafed many temple carvings over the achieves the latter by using a product called
past fifteen or more years. Liquid Steel, basically an epoxy containing
Gardner Wood advises beginning with a powdered steel, which can be brushed on
relatively dense wood, such as basswood, the wood surface before gold-leafing. This
that requires no filler (oak is obviously a bad creates a black surface that can be raked,
choice). If filling is necessary, use a lacquer combed or otherwise textured as desired. It

sealer like Prime®, following the directions is lightly sanded when dry. Because of the
on the can. When it dries, sand lightly with texturing, it is obvious that the application
very fine or worn sandpaper to get rid of would cause bridging and holes
of gold leaf
any raised wood fibres. Then cover the sur- that would show the black surface. To avoid
face with gold size, available from the gold- this, sprayed with
the textured surface is

leaf supplier and most paint stores. It is a bronze or another tone. Then gold leaf is
slow-drying, oil-base size (one brand is applied, rubbed in and burnished. It will
Swift's®), and should be brushed on in a leave some voids because of the texturing,
thin coat and left overnight. The surface is but these create an antiqued look.
ready for application of the leaf when Gold leaf alone tends to be flat and uni-
—
tacky when a dry finger touched to it form, so it may be desirable to antique it to
comes away with a pinging sound, and bring out depths and shadows. There is
without picking up any size. (The surface heavy paste called Rub'n Buff®
available a
will stay in this state for a day or more (American Art Clay Co., Inc., PO Box
under normal conditions.) The gold leaf is 68163, Indianapolis, Indiana 46286) avail-
simply laid over this tacky surface and able in many art-supply stores in 18 tones of
pressed down with dry fingertips. Transfer brass, bronze, copper and gold. The paste
sheets have a blank corner, so the sheet can will stick to any surface, and can be applied
be picked up without touching the gold. by rubbing or by thinning with turpentine
When rubbed down, the transfer tissue can and using a brush in difficult areas. Various
then be readilv lifted off. Inevitablv, some tones can be applied one over the other to
gold will be wasted, and some missed areas get special effects. It is particularly effective
will have to be filled in. To prevent gold over textured areas, and the more the sur-
adhesion in unwanted areas, dust them face is rubbed the better it gets. The virtue
with a little talcum powder; to remove it, of such texturing is that the surface color
just use an ordinary ink eraser. can range from a yellow gold to a green in
When covered, the surface must be bur- recessed areas. As before, the treated sur-
nished to remove jeweller's rouge that held face should be protected with a good poly-
the gold to the transfer sheet and to seal it. urethane varnish if subjected to frequent
This is best done with balls of combed cot- handling or other unusual wear. Other-
ton rubbed over the surface in a circular wise, gold leaf will stand years of at-
polishing motion. If done properly, the sur- mospheric wear, requiring only occasional
face will immediately show a higher gloss. washing with water and a mild soap to re-
Following burnishing, any areas that are move smog and grime deposits.
likely to be abraded —
such as the shank of a On old gunstocks you will find a form of
candlestick or the pushing surface on a inlay that could be more widely used be-
door —should be protected. A finish like cause it is relatively simple to do. It can be
McClosky® Heirloom varnish will do the done with silver, brass or copper flat wire or
job nicely. strip, or combinations, and usually takes

344 APPENDIX II
 Fig. 683. Horse and elephant are of teak, decorated with brass inserts. The horse, for example, is
Vt x 3 x 3 in(1.9 x 7.6 x 7.6 cm), and wire inserts are Vm x Vk-in (.40 x .79-mm) ribbon. Even
the larger spots are made from bits of the same wire, curled up.

M, •

Fig 684. Camel and two bullocks are also of teak with brass inserts. Pieces such as these, as well as those in
Fig. 683, were made in India years ago, but are probably too costly to produce at today's tourist prices.

GOLD-LEAFING 345
 —

cyma curves or scrolls

the form of long a V-shaped groove as wide at the top as the
sometimes with added accents produced metal is thick. The metal ribbon is then cut
by endwise inlay of "spots" of round wire. off, formed to shape and driven in progres-
In India, it was common to decorate small sively, using a light hammer and a dowel.
stylized figures of horses, elephants and The wire should be just about level with the
the like with brass inlay in this way (Figs. surface, so light sanding will smoothe it at
142and 143), and examination indicates that surface level. If the wire buckles during
the brass was formed to desired shapes, driving, cut out and replace the buckled
simply driven into a wood such as teak, portion, since flattening out buckled ribbon
then sanded off until the crushed fibres of and attempting to redrive it usually results
wood at and any projecting
the surface in failure and added complication from en-
brass were removed. The entering edge of largement of the trench.
the brass was slightly wedge-shaped for In woods such as walnut and teak, the
penetration. sides of the trench will close in and grip the
The conventional method of inserting sil- wire with no problems; but you can use
ver and gold is more considerate of the thinned glue in the slot to make sure, or
wood. The desired design is laid out on the rough the side of the wire ribbon slightly
surface or transferred to it but final
after all with a file. Make sure that any two pieces of
sanding has been done (so metal dust wire that butt together are a good joint,
sanded off later will not penetrate surface because any gap will be very visible when
crevices). Then a narrow trench is pro- the work is finished. It may be helpful to file
duced along the lines of the design by driv- the end of the ribbon at a slight angle in
ing in a thin blade sharpened from both such a case, so the upper portion actually
sides like a firmer.These can be made from wedges in place as it is driven down. Once
any thin tempered steel, such as straight the wire is in place, the surface is final-
X-acto® chisel blades. Blade widths can sanded, metal filings brushed and dusted
vary from A in (6.4 mm) down to Vi6 in (1.6
l
away and the piece is ready for finishing.
mm), the latter for following curves. These And any finish will include some moisture
blades should be driven into a depth corre- that will cause the sides of the trench to
sponding with wire or strip width and leave swell back and grip the insert tightly.

346 APPENDIX II
 Anteater, 114 Bolivia, 113
Antiquing, 55, 55, 56 Bolo patterns, 60, 61
Apple (wood), 33 Bone, animal, 298-300,
Argentina, 91, 93, 186 299-301
INDEX "Arkansas, "24 Book of Kells, The, 289
(Numbers in italics refer to Armadillo, 82, 83, 90, 91,114 Bosting, 23
illustrations) Ash, (wood), 13, 34 Bowls, 134, 249, 254
Ashtray, fish, 110 Boxes, 265, 316
Action figures, 206-209, Atlas, 201-206, 203-206 Boxwood, 36
207-209, 321 Austria, 180 Brasell, Austin, 284

Adzes, 15, 16, 336-338, 339 Award plaque, 124, 124-125 Brazil, 90, 209, 305

Africa, 35, 222 Axe, hand, 16 Breadboards, 266, 282

Alabaster, 300 Bronzing, 57
Alaskan jade, 298, 299, 304 Back-bent tools, 15 Brooch, 80, 80
Alder, 33, 34 "Bad wood," 38 Brown, Hope, 95, 98
Alpacas, 90, 113 Bali, 8, 35, 37, 45, 66, 77, 81, Bruegel, Eleanor, 211-212
Alphabets, see Lettering 84, 200, 298 Brunstetter, Ruth T., 299, 300
Alto-relievo, 240 Bark, thick, carving, 40, 41 Bubinga, 35
Amboina, 34 Base, 53-54, 52, 53 Buckeye, 34
Andersen, Hans Christian, Bas-relief, 240 Buildings, see Doors; House
189 Basso-relievo,240 Bulls, 35, 66, 67, 92, 93

Angels, children as, 214, Bass viol player, 181 Bunyan, Paul, 196
214-215 Basswood, 13, 32, 34, 54 Burgees, 168, 169
Angling cut, 21 Bears, 66, 67, 73-74, 73, 78, Burins, 16, 18
Animal bone, 298-300, 79, 248, 297 Busts, 199, 241
299-301 Beaver award plaque, 124, Butterfly mobiles and
Animals, carving, 65-125 124-125 ornaments, 117-120,
birds, see Birds Bebek (dragon duck), 83-84, 118-119
butterfly mobiles and 84 Butternut, 33, 34, 74
ornaments, 117-120, Beech, 34
118,119 Beef wood, 35
caricaturing, 71, 72-73, 72, Bee tree, 32 Cabinet maker's shop model,
73, 90-93, 91, 93, 97, Belt buckles, 62-64, 63-64, 170, 171
105 313-315 Calipers, 31
cats, 95-98, 96-98, 334 Belt sander, 340 Camels, 51, 91, 93, 345
dinosaur mobile, 106-112, Benches, 16-17, 17 Cameo, 242, 304
107-108 Berruguete, Alonso, John the Candle sconce, 279
dogs, 67, 71-72, 72, Baptist, 252 Canoe, 331
98-104, 99-103 "Bill," 98, 99 Card holders, 74, 75, 80, 80
fish, see Fish Birch, 34 Caricatures
gold-leafing, 345 Birds animal, 71, 72-73, 72, 73,
horses, 77, 98, 99, 104-106, designs, 121, 122 90-93, 91, 93, 97, 105
110, 345 panels, 262 human, 181, 185, 185, 187,
in ivory, 296, 297, 310, 311 varieties of, 33, 68-69, 68, 297
miniature, 35, 84, 85, 86, 69, 70, 71, 72-73, 73, Carousel horses, 328, 328
87, 317, 318, 332 74-76, 74-76, 84-90, Carver's bench, 16-17, 27
in owndesign, 120-122, 84-90, 94, 94,111, 297, Carver's screws, 340, 342, 343
121, 122 306 Carving personality, 9
panels of, 81, 81, 106, 123, see also specific bird Carving tools, see Tools
262 Black bear, 248 Catalpa, 40
in relief, 106, 266, 267 Black cottonwood, 40 Cats, 91-92, 93, 95-98,
of South America, 112-114, Black walnut, 33-34, 33 96-98, 334
112-114 Blinding wood, (blind-my- card holder, 80, 80
in stone, 305, 306 eyes), 35 Cavo-relievo 240
,

stylizing, 90-95, 92, 94 Block stool, 55, 267 Cedar, 33, 33

to suit clientneeds, Boar, 81, 82 Celtic birds, 80, 80
124-125, 124-125 Boat(s) Centaur and oread, 39
variations in, 65-84, 65-84 models, 168-169, 269 Chair, 55
see also specific animal panel, 163-168, 164-167 Chamfer, 22

INDEX 347
Chapman, Kenneth M., Dance mask, miniature, 248 Faces and heads, carving,
Evolution of the Bird in Dancers, 46-47, 47 172-188
Decorative Art, 120 Decoys, 71 caricatures, 173, 174, 185,
Charms, 250, 297 Deer, 70 185, 187
Checks, wood, 37-38
in "Deer Dancer," 45 ears, 183
Cherry wood, 33, 34 DeFregger, Franz, 275-276 eves, 178-179
Chess knight, 77 Denmark, 197 face, 173, 175
Chestnut, 34 Designs, original, 120-122, and facial variations, 177
Child angels, 214, 214-215 121, 122 head, 172, 175-176, 178
Chile, 42, 90, 186, 241, 307, Devil head, 309 jaws, 183
309 Dinosaur mobile, 106-112, nose and profile, 177,
China, 105, 146, 265, 308, 317 107-108 179-183
Chips, 21 Disk, 264 portrait, 183-185
Chisels, 14-15, 16, 18 Dog-leg tools, 15 South American heads,
shapes, 13, 14 Dogs, 67, 71-72, 72, 98-104, 186, 187
sharpening, 27 99-103 Fawn, 92, 93
using, 19 skeleton, 82, 82 "Feather Dancer," 46-47, 47
vs. knives, 18-20, 19 Dogwood, 34 Figa, 209
Christmas tree decorations, Doors, 160-162, 161, 162, 251 Fiji, 161
124, 168-169, 169 relief carving on, 239, Finishing pieces, 44-57
Circus wagons, 328, 329 268-269 with antiquing, 55, 55, 56
Clark, Fred, 74, 75 Doorstop, 72 with a base, 53-54, 52, 53
Clasp knife, 11 Doves, 87, 87, 89 with gold-leafing, 56-57,
Clouds and sheep panel, Dragon duck, 83-84, 84 344-346, 345
270, 270-272 Dragons, 68, 146-151, with machine-roughing,
Cocobola, 35, 36 146-151 51-52, 51
Coconut shell, 41, 43 Draw cut, 12, 19 with modelling, 49-50, 50
Coelanglyphic sculpture, 240 Driftwood, 45, 46 and surface textures,
Comb, 334 Drill cut, 12 44-49, 44-48
Constellations, 206 Drums, 82, 83, 330 with texturing, 48-50, 50
Conversion tables, 335 Dry rot, 33, 38 with wood showing, 54-56
Cookie roller, 282-283, Ducklings, 88 Firmer chisel, 14, 14
282-283 Ducks, 90
79, 80, 86, 87, Fish, 69-70, 69, 83, 83, 94,
Coppering, 57 "Praying
Diirer, Albrecht, 94, 112, 116-117,
Costa Rica, 253 Hands," 210, 210 116-117,306
Cottonwood, 34 ashtray, 110
black, 40 jointed, 115-116, 115
bone, 87 Eagles, 66-67, 66, 75-76, 75, spoon, 120
skeleton, 82, 82 76, 86, 88, 121, 122, Fixed-blade knives, 10-11,
"Cowboys," South 122 12, 20
American, 186 Eaglets, 111 Flaws, in wood, 33, 37,
Crane, 66 Earrings, 69 38-40, 38, 39
Creatures Easter Island, 8, 254 Fleming, Peggy, 209
dragons, 68, 146-151, Ebonv, 36, 37, 332-334 Flowers, carving, 126-140
146-151 Ecuador, 41, 42, 50, 83, 113, door panel, 268-269
statuettes, 152-155, 114, 184, 253, 275 exercises in, 129-134,
152-155 Elephants, 345 131-134
unicorns, 141-145, 141-145 Elephant tusk, 296 pendants, 227
Cryptomeria, 40 English oak, 36 and pine tree, 138-140,
Crystal ball, in carving, 188, English sycamore, 36 137-138
188 English walnut, 36 and polyglot panels,
Curl cut, 12 Enlarging methods, 29, 135-138, 135-136
Cutting with knife, 12, 13-14, 30-31 in relief, 236,268
19, 20, 21 Eriksen, Edvard, 189, 190 simple, 126-127, 128-131
Cypress, 33, 34 Eskimos, 250, 298, 310, 311, tools for, 128
312 variety in, 134-135,
D-adzes, 336-338, 339 Eternal knot, 129, 132 234-235
Daisy, 22 Evans, Ken, 275 whittling, 22, 128
Dance drum, 330 Fluteroni chisel, 15

348 INDEX
Forness, Bruce T., 37 Hedgehog, 78, 79 Jade, Alaskan, 298, 299, 304
Fox, 78, 79, 84, 85, 110 Hendricks, John E., 336 Jaguar, 65
Frogs, 39, 40, 74, 75, 297, 317 Hercules vs. the Nemean Japan, 40, 48, 67, 95,
Frame, picture, 239 Lion, 152-153 224-226, 248, 285, 312,
Fruitwoods, 33, 34 Hickory, 34 316, 317
Furniture, miniature, 170, 171 Hickory nuts, 41, 43 Jelutong, 32, 34
Galapagos Islands, 71, 83 High relief,239, 240, 241, Jewelry, 69, 316
Garamut, 34 242, 274-276, 275, see also Pendants
Gibbons, Grinling, 274-276 Juarez, Benito, 223, 280, 281
36, 128,
275 Hoch, Sheldon, 121 "Justice," 257

Gilding, 56-57 Hoffer, Andreas, 276

Giraffe, 91, 93 Holland, 266
Kashimir, 260
Gnomes, whittling, 58, Hollow cut, 12
Kerosene, 34
58-59 Hollow relief, 240-241
Kittens, 98
Goat, 67, 67 Hollv, 34
Knife cuts, 12, 19,20,21
Goetz, Gunther, 135 "Honey Girl," 98, 99
Knives
Gold-leafing, 56-57, 57, Honing, 24, 25, 26
vs. chisels, 18-20, 19
344-346, 345 Horn, 307
cutting with, 13-14
Gouges, 14, 14, 17, 18, 23 Horses, 77, 98, 99, 104-106,
types of, 10-11,12, 12,337,
Gourds, carving, 41-43, 43 110, 317, 345
342
Grain, cutting with, 11, 13, 21 head, 8
for whittling, 20-21
Granadillo wood, 74 House, carving "portrait" of,
Knots, in wood, 37, 38
Greek peasant carvings, 156-160, 157-160
Kokkinakes, Spyros, 115
115-116,115 House posts, 114
Krishna, 259
Greenheart, 35 Human figure, carving,
Kubbestol, 55, 267
Greenstone, 298, 300 189-215
Kwila, 34
Grounding, 23, 255-257, 255 in action, 206-209,
Guillotine cut, 19 207-209, 321
Gum, 34 children as angels, 214, Lacewood, 36
Gypsy seer, 188 214-215 Lacquer, 55
Haag, T. E., 84, 134 hands, 210-212, 210-212 Lettering, 287-295, 290

Adder and Eve, 91, 92 male musculature, an award panel, 290, 292,
Cat and the Fiddle, 91, 92 201-206, 203-206 293
relief carvings, 233, 240,
proportions of, 197-200, on plaques, 293-295, 294
262, 280, 281
198 and selecting an alphabet,
stvlized animals, 91, 92,
stvlized, 213, 213 288, 289-290, 289, 292

92, 93, 94
torso, 198, 200-201 Lignum vitae, 35, 36
Hutchings, Roy, 337 Lime, 36, 36
stvlized human figures,
213
Linden, 36
Haiti, 45, 253, 279 Ibex, 79, 79
Lions, 76, 77, 91, 92, 220, 307
Half head, 38
relief, 240, 241 Ibis, 79, 80
Little Mermaid, 189, 290
Hand axe, 16 India, 104, 260
Hand routers, 16
miniature, 189-195,
Insect panel, 269
Hands, 210 292-295
Insignias, 61
Hansa, 79, 79 Intaglio carving, 241-242,
Llamas, 90, 91, 92, 223
Hard woods, 33, 54 Log, carved, 255, 256
282-286, 282-283
see also specific wood Lohs, Martin, 210
Intaglio-relevato, 240
Harewood, 35, 36 International Wood Low relief, 227, 240, 250, 262,
Hatchet, shingling, 16 284-286
Collectors Society, 37
Hawkins, Ruth, 214, 214-215 Ironwood, 34, 36, 94
Headdress, 41 Israel, 52, 68, 70, 78, 79, 234 Macadamia, 34
Heads, 41, 309 Italy, 304 Macaroni chisel, 15
caricatures, 173, 174, 185 Ivorv, whittling Machine-roughing, 51-52, 52
carving, 172, 175-176, 178, animals, 296, 297, 310, 311 Madonna and Child, 39, 184
182 miscellaneous examples of, Magnolia, 34
relief carving of, 235, 275, 308-312 Mahogany, 13, 32, 34, 36
279, 280 types of, 296 Mallets, 15-16, 25
see also Faces and heads, working with, 296, 298 Maple, 34
carving Ivorywood, pink, 35, 36-37 Martin, Wade, 8

INDEX 349
Masks, 222-230 Neustadt, Harrison, 62-63, Pelicans, 111
African, 222 64,323 Pendants, 69, 76, 77, 86, 87,
Japanese, 224-226, Newel posts, 123 127,279,304,311,317,
224-225 New Guinea, 45, 330, 333
Mexican, 223 330-334 Penguins, 73, 73, 92, 93, 94,
miniature dance, 248 New Zealand, 284 224
relief carving, 254, 264, 265 Nighthawk, 33 Penknife, 22, 22
step-bv-step carving, Noah's ark, 67, 68 Personality of carver, 9
226-230, 226-230 Noh masks, 224-226, Peru, 43, 91, 113, 114, 161, 279
tools for, 223-224 224-225 Philippines, 76, 77, 199, 275
Meerschaum, 301, 303 Nudes Phillip, John
Mexico, 37, 40, 41, 46, 66, 67, Atlas, 201-206, 203-206 belt buckles, 62, 63-64,
70, 71, 77, 81-90, 96, female, 200, 233 323, 325
105, 110-112, 223, 298, Little Mermaid, 189-195, knife, 342
304, 306 191-195 Picasso, Pablo, "Dora Marr
Mezzo-relievo, 240 male, 202 Seated," 286
Michelangelo, 198 relief carving, 240 Picture frame, 239
Miniatures Nuts, carving, 41-43, 42, 298 Piercing, 50, 50, 242
animals, 35, 84, 85, 86, 87, Pig, 332
Oak
317, 318, 332 Pine
Austrian, 36
carving, 28 ponderosa, 40
Eastern white, 34
dance mask, 248 sugar, 32
English, 36
furniture, 170, 171 white, 13, 32, 34, 54
red, 34
of Little Mermaid, 189-195, yellow, 32
Oil bowl, 249
191-195 Pine cone panel, 234
Oiling, 55
oil bowl, 249 Pine tree panel, 137-138,
"Old Man of the Sea," 45-46,
totem pole, 243-247 138-140
46
see also Models; Small Pink ivorywood, 35, 36-37
Olive pits, 41, 42
pieces; specific piece Pins, 326'
Olive wood, 52
Minton, Hugh, Jr., 101, 101 Pipe, 303
Onyx, 300, 306
Minton, Hugh C,
146 Pipestone, 300, 302
Osage orange, 34
self-portrait, 216-218, Pits, carving,41-43, 42
Owls, 67, 67, 81-82, 81, 86,
216-217 Place card holder, 74, 75, 80,
87,91,91,111,115,116
Mobiles 80
butterfly, 118, 119 Panels, 33, 34, 52 Planes, 16
dinosaur, 106-112, 107-108 of animals, 80, 81, 106, 123, Plaques
Modelling, 49-50, 50 262 award, 124, 124-125
and low relief, 275, boat, 163-168, 164-167 floral, 235
276-282, 277-280, 282 of clouds and sheep, 270, letters on, 293-295, 294
Models, 319, 320 270-272 Pochote, 34
boat, 168-169, 169 door, 251, 268-269 Pocketknife, 10, 11, 22, 20
of cabinet maker's shop, floral, 135-138, 135-136, Pointing cut, 22
170, 171 236, 268-269 Polyglot panels
of carousel horses, 328, 328 insect, 269 floral, 135-138, 235-236
of circus wagons, 328, 329 lettered, 293-295, 294 relief carving, 237-239,
Monkey, 82-83, 83 pine tree, 137-138, 237, 238
Moonstone, 260 138-140, 234 Ponderosa pine, 32, 40
Moorish carved door, 161, polyglot, 135-138, 135-136, Poplar, 32-33, 34
162, 251 237-239, 237, 238 Portraits, 183-185, 216
Morgan, Neil, 7 of scenes and people, and self-portraits, 216-220,
Motifs, 123, 250, 284 273-274, 273 216-217 ,219-220
Myrtle wood, 34, 101 Pantographs, 30, 31 Power tools, 16, 18

Panza, Sancho, 174, 175 Praying girl, 258

Napkin rings, 60, 67, 134 Parakeet, 115, 116 Prepackaged hand carvings,
Neckerchief slides, 60-62, Paring cut, 12 7-8
60, 61 Paulownia, 33 Proportioning dividers, 30, 31
Nepal, 260, 262 Peach pits, 41, 42, 43 Purpleheart, 35, 109
Nereid, 240 Pear (wood), 33 Puzzle box, 265
Netsuke, 312 Pecan (wood), 33, 34 Pyrography, 48-49

350 INDEX
Quail 222 Saws, 16 South American
Quixote, Don, 173, 174, 175, Savers, Charles M., 18 animals, 112-114, 212-214
185 The Book of Wood Carving, "cowboys," 186
133 heads, 186, 187
Scrapers, 16 see also specific country
Rabbits, 42, 84, 85
Seal, 112 Spain, 93, 162, 252, 279
Raddha, 259
Seeds, carving, 41 Speckbacher, Josef, 276
Raleigh, Sir Walter, 202
Self-portraits Spoons, 110, 317, 332
Red alder, 34 Tangerman,
of E. J. "Squash plaver," 53
Red oak, 34 218-221, 219-220 Sri Lanka, 79, 97, 258, 259,
Reed, Charlie, 302
of Hugh C. Minton, 260, 261, 264, 265, 347
Relief carving, 231-286
216-218, 216-217 Stab cut, 12
animals, 106, 266-267
Serifs, 287 Stains, 55-56
clouds and sheep panel,
"Setting-in,"23, 232 Stations of the Cross, The,
270, 270-272
Sharpening tools, 24-27, 25, 222-222
door panels, 268-269
26, 339-340, 340, 341 Statue, 348
Far-Eastern, 258, 260-261,
Shavings, 8 Statuettes, 152-155, 152-155,
259-265
Sheep and clouds panel, 270, 208, 333
flowers, 236
270-272 Stiacciato, 240
grounding in, 255-257, 255
Shellac, 44, 55 Stones, carving, 298, 300-301
half relief, 240, 241
Shells, carving, 41, 43, 298, animals, 305, 306
high relief, 240, 241,
299, 300-301, 304 Stones, for sharpening tools,
274-276, 275
Shingling hatchet, 16 24, 25-26
hints on, 257-260
Shoe, wooden, 242 Stool, 55, 267
hollow relief, 240-241
Shoe horn, 115 Stop cuts, 29, 20, 21
and inlaying, 242-243
Silhouetting, 50, 50, 254, 275, Street orchestra, 280
intaglio, 241-242, 282-286,
276 Stropping, 24, 26
282-283
Silvering, 57 Stylizing
lower relief, and
Simons, Richard J., 211 animals, 90-95, 92, 94
modelling, 275,
Sisso, 262 human figure, 213, 223
276-282, 277-280, 282
Siva, 35 Sugar pine, 32
low relief, 127, 240, 250,
Size of piece, 28-31 Surface textures, 44-49,
262, 284-286
and enlarging methods, 44-48
miscellaneous examples of,
29, 30-31 Sutter, H. M.
233-236, 248-257, 277
miniatures, 28 designs for neckerchief
painting on, 250
and reducing methods, 31 slides, 60, 62, 62
polyglot panels, 237-239,
Skates and skaters, 322-324, flower carving lessons,
237, 238
326-327 229-233,131-134
of scenes, and people,
Skeletons, 42, 82 tool sharpening method,
273-274, 273
Skew chisel, 14, 14 339
and "setting in," 23, 232
Skin diver, III tools, 18, 232-233, 233
232-233
tools for, 18, 23,
on totem pole, 242-247
Skowhegan Indian, 348 Swamp oak, 34
Slicing cut, 12 Swans, 42, 84-85, 85, 89, 90
wood for, 231-232
"Slips," 24 Swashes, 287
Riffler file, 16, 18
Small pieces Swedish sloyd, 22
Rimachi, Domingo
gnomes, 58-59
58, Sycamore, 34, 36
Fernandez, 91
miscellaneous, 316-319
Road runner, 88, 88, 89, 90
neckerchief slides, 60-62, Tagua nuts, 42, 42
Rocking cut, 12
60, 61 Tahiti, 7
Rooster, 76, 76
skates and skaters, Tangerman, E. J.
Rosewood, 34-35, 36
322-324, 326-327 Carving Birds in Wood, 84
Rowan, J. 0.,249
see also Miniatures; specific self-portrait, 218-221,
Russian bowl, 254
piece 219-220
Snail, 76, 77 Whittling and Woodcarving,
Salad bowl, 234 Snake, 66 98
Salad set, 334 Soapstone, 298, 299, 300, Teak, 13, 35, 35, 55
Sandalwood, 36 302, 306 Temple carvings, 94, 95
Sanding, 21-22, 44, 55 Soft woods, 32-33, 54-56 Textures, surface, 44-49,
Satinwood, 35, 36 see also specific wood 44-48

INDEX 351
 1

~7-/&'W

Texturing, 48-50, 50 Trolls, 73-74* 7 gnomes, 58, 58-59

Thumb push, 12 Trout, 116-117, 116-117 ivory, 296-298, 297,
Thuva, 35 Tupelo, 34 308-312
Tibet, 260, 263 Turkey, 300-301, 303 mistakes, 8
Tiki, 7 Turtles, 71, 71, 83, 114 neckerchief slides, 60-62,
Tlingit oil bowl, 249 60, 61
Toad, 39, 40, 74, 75, 297, 317 and sanding, 21-22
Tools, 10-23 Ulvsses and Cyclops, and size of piece, 29
adzes, 15, 16, 336-338, 339 154-155^ 155 skates and skaters,
auxiliary, 16 Ulysses and Polyphemus, 321-327; 322, 325, 326,
and benches, 16-17, 17 152-154, 154 327
care of, 20 Uncials, 287 and stop cuts, 20, 21
carver's screws, 340, 342, Unicorn, 141-145, 141-145 tools for, 20-21
343 wood for, 33-34
for carving flowers, 128 Willow, 33, 34
Varnish, 40, 44, 54, 55, 56
for carving masks, 223-224 Windswept, 38
Veiner chisel, 18
chisels, 13, 14-15, 14, 16, Winerv doors, 161, 161
Veiner gouge, 14, 14
27 Wood,' 32-41
Veneers, 36
chisels vs. knives, 18-20, "bad," 38
Vermilion, 34, 35, 80
19 and bark, 40, 42
Virgin of Soledad, 46, 46
choosing, 11 checks in, 37-38
Vises, 16-17, 17
and cutting with grain, 11, dry-rotted, 33, 40
V-tool, 14, 15, 18, 27
13 with flaws, 33, 37, 38-40,
gouges, 14, 14, 17, 18, 23 38, 39
hints on using, 20 Wahnadagee, 336 and gourds, 41-43, 43
knives, 10-11, 11, 12, 18, 20 Walking stick, 333 grain, cutting with, 11, 13,
mallets, 15-16, 15 Walnut, 13 21
nicking self with, 20 black, 33-34, 33 hard, 33, 54
pocketknife, 10, 11, 11 English, 36 imported, 35-37
power, 10, 11, 11, 16, 18 Italian,36 knots in, 37
for relief carving, 23, shell, 41, 43 local availability of, 34
232-233 Walrus, 297, 306 and nuts, 41-43, 42, 298
sharpening, 24-27, 25, 26, Walrus tusk, 296, 297, 310, and pits, 41-43, 42
339-340, 340, 341 311 for relief carving, 231-232
sizes, 17-18 "Washita," 24 and seeds, 41
and vises, 16-17, 17 Waxing, 55 soft, 32-33, 54-56
for whittling, 20-21 Weasels, 75, 76 what to start with, 37
see also specific tool West Germany, 51-52 for whittling, 33-34
Toomi, S., 302 Whale, 299 see also specific wood
Toreador and bull, 50, 275, Whalebone, 298, 299 Woodchucks, 75, 75
276 Whetting, 24, 25, 26 Wooden shoe, 242
Tortoise, 71, 71, 83, 114 White oak, 34
Totem poles, 242, 246 White pine, 13, 32, 34, 54 Yellow pine, 32
miniature, 243-247 Whittling, 20-22 Yugoslavia, 76, 255, 256
Trays, 48, 49, 263, 285 and bases, 53
Trench carving, 240-241, 281 and chips, 21 Zebrawood, 35, 36
Trobriand Islands, 330, cutting methods, 22-23 Zimmerman, Eric, 105
330-334 flowers, 22, 128 Zivkovic, Bogosav, 255, 256

352 INDEX
 BOSTON PUBLIC LIBRARY

9999 00616 767 8 \

,«^

Boston Public Library

IT199.7
WEST ROXI Ti"
BRANCH LIB
8b012003-56
WRx

The Date Due Card in the pocket in-

dicates the date on or before which
this book should be returned to the
Library.
Please do not remove cards from this
pocket.
 $12.95
higher in Canada

Complete Guide to
Wbod Carving
With 50 years of experience behind him, E. J.
Tangerman, the famous dean of
master woodcarvers, has taken the finest projects from nine volumes of his work to
create this all-encompassing guide for the woodcarver.

A how-to book from start to finish, the compendium begins with tools and wood
selection,and continues with hundreds of projects and designs ideas of —
astounding variety. What you can produce by following the hundreds of hints and
almost 700 drawings and photographs in this volume are carvings that you will be
proud to call your own.

Coverage includes a vast range of projects and ideas:

a animals a plants n flowers
o buildings D faces and heads n human figures
a and much, much more
Continually citing inspiring examples and illustrations from the best craftsmen
from around the world, Tangerman discusses every aspect of the craft, from sizing

your working drawings to get the right filial result, to capturing personality. He
seeks out the unique character of an object and guides you in finishing your work
in a multitude of ways, such as gilding, roughing and antiquing. He includes relief
carving, and tells how to start with small pieces and work up to doors and statues.
Mr. Tangerman has produced an A-to-Z of woodcarving projects that every carver
will find indispensable.

Cover photo by Ron Roszkiewicz

Sterling Publishing Co. Inc. Ne-v York

s Distributed in the U.K. by Blandford Press

49725 07922
ll l
ISBN 0-fl0bT-7<122-M