Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    NVR 1000 and 3000 DNV Type Approval

    Uploaded by

    Balasaheb Adhalrao
    This certificate certifies that two VHF radio models, the NVR-1000 and NVR-3000, comply with regulations for marine equipment. The certificate provides details on the radio models, documentation, tests performed, and marking requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    NVR 1000 and 3000 DNV Type Approval

    Uploaded by

    Balasaheb Adhalrao
    28 views3 pages
    This certificate certifies that two VHF radio models, the NVR-1000 and NVR-3000, comply with regulations for marine equipment. The certificate provides details on the radio models, documentation, tests performed, and marking requirements.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This certificate certifies that two VHF radio models, the NVR-1000 and NVR-3000, comply with regulations for marine equipment. The certificate provides details on the radio models, documentation, tests performed, and marking requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    28 views3 pages

    NVR 1000 and 3000 DNV Type Approval

    Uploaded by

    Balasaheb Adhalrao
    This certificate certifies that two VHF radio models, the NVR-1000 and NVR-3000, comply with regulations for marine equipment. The certificate provides details on the radio models, documentation, tests performed, and marking requirements.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Certificate No:

    EC-TYPE EXAMINATION MEDB00006HT

    CERTIFICATE (MODULE B)
    Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED). This Certificate is
    issued by DNV GL SE based on the notification of the Federal Maritime and Hydrographic Agency of
    Germany.

    This is to certify:
    That the VHF radio installation capable of transmitting and receiving DSC and radiotelephony

    with type designation(s)


    NVR-1000, NVR-3000

    Issued to
    New Sunrise Co.,Ltd.
    Suzhou City, Jiangsu, China

    is found to comply with the requirements in the following Regulations/Standards:


    Regulation (EU) 2020/1170,
    item No. MED/5.1. SOLAS 74 as amended, Regulations IV/7, IV/14 & X/3, IMO Res. A.385(X),
    IMO Res. A.524(13), IMO Res. A.694(17), IMO Res. A.803(19), IMO Res. MSC.36(63), IMO
    Res. MSC.97(73), IMO MSC/Circ.862, IMO MSC.1/Circ.1460, IMO COMSAR Circ.32, ITU-R
    M.489-2 (10/95), ITU-R M.493-14 (09/15), ITU-R M.541-10 (10/15)

    Further details of the equipment and conditions for certification are given overleaf.

    This Certificate is valid until 2025-11-11.


    Issued at Hamburg on 2020-11-12
    for DNV GL SE
    DNV GL local station:
    Shanghai

    Approval Engineer:
    Gerhard Aulbert
    Harald Bluhm Notified Body
    No.: 0098 Head of Notified Body

    The mark of conformity may only be affixed to the above type approved equipment and a Manufacturer’s Declaration of Conformity issued when
    the production-surveillance module (D, E or F) of Annex B of the MED is fully complied with and controlled by a written inspection agreement
    with a Notified Body. The product liability rests with the manufacturer or his representative in accordance with Directive 2014/90/EU.
    This certificate is valid for equipment, which is conform to the approved type. The manufacturer shall inform DNV GL SE of any changes to the
    approved equipment. This certificate remains valid unless suspended, withdrawn, recalled or cancelled.
    Should the specified regulations or standards be amended during the validity of this certificate, the product is to be re-approved before being
    placed on board a vessel to which the amended regulations or standards apply.

    LEGAL DISCLAIMER: Unless otherwise stated in the applicable contract with the holder of this document, or following from mandatory law, the
    liability of DNV GL AS, its parent companies and subsidiaries as well as their officers, directors and employees (“DNV GL”) arising from or in
    connection with the services rendered for the purpose of the issuance of this document or reliance thereon, whether in contract or in tort
    (including negligence), shall be limited to direct losses and under any circumstance be limited to 300,000 USD.
    Form code: MED 201.DEU Revision: 2020-01 www.dnvgl.com Page 1 of 3

    © DNV GL 2014. DNV GL and the Horizon Graphic are trademarks of DNV GL AS.
    Job Id: 344.1-010479-1
    Certificate No: MEDB00006HT

    Product description

    The VHF radio capable of transmitting and receiving DSC and radiotelephony NVR-1000 is designed for
    marine mobile service which provides function of VHF radiotelephone and digital
    selective calling.

    VHF Radiotelephone Type: NVR-1000 Software version: 1.1x with


    Microphone Type: NVR-1030H and

    Optional:
    Thermal Printer Type: NPT-100
    VDR connection unit: Type: NVC100

    Or

    VHF Radiotelephone Type: NVR-3000 Software version: 1.x


    Handset Type: NHS-200

    Optional:
    1. Power Supply Unit PS-10 1
    2. VHF Antenna NVA100 2
    3. Thermal Printer NPT-100 1
    4. External Speaker NSK-100 1
    5. Microphone MC100 1
    6. Flush Mount Brackets NFB700

    Documentation:
    NVR-1000 Service Manual 20151102
    NVR-1000 User Manual 20151102
    NVR-3000 Operation and Installation Manual NVR-3000 OM.E 20201021-01

    Type Examination documentation

    Tests carried out


    IEC 60945:2002 incl. IEC 60945 Corr. 1: 2008,
    ETSI EN 301 925 V1.5.1
    ETSI EN 301 033 V1.3.5
    ETSI EN 300 338-1 V1.4.1 (2017-02),
    ETSI EN 300 338-2 V1.4.1 (2017-02),
    IEC 61162-1:2016,
    IEC 62923-1:2018,
    IEC 62923-2:2018.

    Marking of product

    According to IEC 60945, Sect.4.9:


    The product to be marked with following information, where practicable:
     Identification of the manufacturer,
     Equipment type number or model identification under which it was type tested,
     Serial number of the unit,
     Compass safe distance.
    Alternatively, the marking may be presented on a display at equipment start-up, and in case of fixed
    equipment compass safe distance may be given in the equipment manual. According to Article 10 of
    the Council Directive (MED):
     Wheel mark to be affixed visibly, legibly and indelibly to the product or to its data plate and,
    where relevant, embedded in its software. Where that is not possible or not warranted on

    Form code: MED 201.DEU Revision: 2020-01 www.dnvgl.com Page 2 of 3


    Job Id: 344.1-010479-1
    Certificate No: MEDB00006HT

    account of the nature of the product, it shall be affixed to the packaging and to the
    accompanying documents.
     Wheel mark to be affixed at the end of the production phase. For specific products,
    manufacturers may use an appropriate and reliable form of electronic tag instead of, or in
    addition to, the wheel mark.
    END OF CERTIFICATE

    Form code: MED 201.DEU Revision: 2020-01 www.dnvgl.com Page 3 of 3

    You might also like