Grow Light Guide
Grow Light Guide
Grow Light Guide
Seedlings need light for healthy growth. A sunny windowsill seldom provides vegetable crops with enough
direct sunlight to produce strong seedlings. Unless you are starting seedlings outdoors in a greenhouse, you
will most likely need to provide supplemental lighting in the form of grow lights. Manufacturers of grow lights
typically provide information about the “color temperature” and lumen output of the lamp in question. To
comparison shop and select a unit suitable for your needs, it can be helpful to understand these terms as well
as the basics of light and photosynthesis.
Why is the color temperature of a grow light important? Color affects plant growth in different ways. Blue light is
necessary for vegetative growth while red light is needed to promote flowering and fruit production. The color
temperature of a grow light helps you understand if the overall output of the grow light trends towards blue or
red.
In addition to color temperature, some manufacturers also provide a spectral power distribution (SPD) graph,
which shows how much light of each color the grow light produces. Since most grow lights do not produce
equal amounts of each color, an SPD can give you a more detailed picture of the color output than color
temperature alone. The following tool shows SPD curves for several makes/models of grow lights:
https://research.ng-london.org.uk/scientific/spd/?page=spd&ids=55
Many grow lights are labeled as "full spectrum," meaning they emit light across the full-color spectrum,
including not only blue and/or red light, but also enough green light for the overall output to look like natural
light to the human eye. While plants primarily use blue and red light, research suggests that some species
perform best with full spectrum light. Therefore, it can be helpful to choose a full spectrum light.
As a general recommendation, choose a full spectrum grow light with a color temperature in the blue
range (5,000 - 7,000K) to promote vegetative growth and choose a color temperature in the red range
(3,500 - 4,500K) to promote fruiting and flowering.
Manufacturers may provide two types of lumen measurements for a grow light. Initial lumens (also called initial
light output) indicate the output of the light before it has begun to age and lose operational efficiency. Mean
lumens (also sometimes called design lumens) provides a measurement of the average output of the light over
the duration of the rated life of the grow light.
As a general recommendation, use lumen output in combination with color temperature and consider it
a metric for comparing the relative output of different grow lights.
WATTAGE
What about Watts? Watts are a measurement of power consumption but are not necessarily indicative of either
light output or light color. High-efficiency lights will emit more light per watt of power used than less efficient
lights. Wattage is primarily relevant in determining the cost of operating the light and the compatibility between
the grow light and your power source.