HARCOURT BUTLER TECHNICAL UNIVERSITY

Kanpur-208002

Tender price: Rs. 6000+18%GST

TENDER NO. HBTU/LIBRARY/03_01
FOR
Supply of e-Books

Section I - Invitation For Bids

Introduction of the Project

Harcourt Butler Technical University (having two campuses namely East Campus EC
77.84 acres and at distance of 3 km. West Campus WC 248.63 acres), Kanpur here
in after referred as University for brevity, invites on line e-Tenders under two-Bid
system from reputed and registered suppliers/agencies to supply of e-books. Further
details of the notice inviting Tender alongwith their terms and conditions and other
documents can be seen/downloaded from the website https://etender.up.nic.in to
participate in the e-tendering process, the bidder has to register with the NIC portal
i.e. https://etender.up.nic.in.

Estimated cost of Tender: Approximately Rs. 40, 00,000.00 (Rs. Forty Lacs Only)
Including all taxes. Issuer of the RFP

1.2 The Registrar,

Harcourt Butler Technical University
Kanpur (U.P.) – 208002
Phone No. 0512-2534001-05
E-mail Id: [email protected]
Website: www.hbtu.ac.in

Any proposal received by University after the deadline for submission of proposals
mentioned in the Key Events & Dates as per section 1.4 will be summarily rejected.
University shall not be responsible for any delay, Technical fault or non-receipt of the
documents. No further correspondence on the subject will be entertained.

1.3 About the RFP Documents

a) This RFP provides information regarding the procurement, Scope of Work,

Technical requirements and other related information to the Bidder(s).
b) It details the General Terms & Conditions with respect to the Bid process
management to be adopted for the proposed Project.
c) The RFP contains the Agreement templates outlining the contractual and legal
terms & conditions applicable for the proposed engagement
d) As should be clear from the Scope of the proposed Project, University seeks a
specific proposal responsive to this RFP in every respect and detail, rather than a mere
compilation of materials and the Bidder are expected to examine all instructions, forms,
 terms, Project requirements and other information in the in the RFP documents. As
should be clear from the Scope of the proposed Project, University seeks a specific
proposal responsive to this RFP in every respect and detail, rather than a mere
compilation of materials and the Bidder are expected to examine all instructions, forms,
terms, Project requirements and other information in the RFP documents. Failure to
furnish all information required by the RFP documents or submission of a
proposal not substantially responsive to the RFP documents in every respect will be at
the Bidder’s risk and may result in rejection of the proposal and forfeiture of the Earnest
Money Deposit (EMD).

1.4 Key Events & Dates

RFP Document is available at Uttar Pradesh Government Tender Information

system’s website: https://etender.up.nic.in
Sr. No. Events Date and Time
1. Uploading/Publishing of Tender Document 08.03.2019, at 1700 hrs.
2. Downloading of Tender Document Starts From 08.03.2019, at 1700 hrs.
3. Pre-bid meeting 28.03.2019, at 1200 hrs.
4. Last date of bid submission 05.04.2019, at 1700 hrs.
5. Technical bid opening 06.04.2019, at 1200 hrs.
6. Seek Clarification starts 08.03.2019, at 1700 hrs.
7. Seek Clarification ends 27.03.2019, at 1700 hrs.
8. Earnest Money Deposit (EMD) INR Rs.40,500.00 (Rupees
Forty thousand five hundred
only) in the form of a Demand
Draft/Banker’s Cheque drawn
on any scheduled bank
payable at Kanpur, in favour of
Finance Controller HBTU,
Kanpur.

1.5 Amendment of RFP Document

At any time till one day before the deadline for submission of bids, the University
may, for any reason, whether at own initiative or in response to a clarification requested by a
prospective Bidder, modify the Bid Document by amendment. All the amendments made in
the document would be informed through the e-tender Portal https://etender.up.nic.in. All
such amendments shall be binding on all the Bidders. The Bidders are also advised to visit
the aforementioned website on regular basis for checking necessary updates. The University
also reserves the rights to amend the dates mentioned in the section 1.4 of the RFP for Bid
process.

1.6 Selection criteria and conditions of technical bid for empanelment of supply of
e-Books.
1. The firm should be having PAN (Permanent Account Number) allotted by the
Income Tax Department; document proof of the same has to be enclosed.
 2. The firm / Agency should be a member of the Good Office Committee (Government
of India) of the Federation of Publishers Association of India or any other National
Association and proof to this effect has to be enclosed along with the offer for
empanelment
3. The e-Books supplier(s) must have experience of supplying such library materials
for the last three years. Documentary proof of the same has to be enclosed.
4. Conditional tender shall not be accepted.
5. Tender should enclosed earnest money in the form of Bank Draft/Banker’s Cheque
worth Rs.40,500=00 (Rs. Forty thousand five hundred only) favouring Finance Controller,
HBTU, Kanpur, Payable at Kanpur. The tender without earnest money shall not be
entertained.
6. For supplying e-Books, tenderer shall have to provide 100% Bank Guarantee of the
amount to be advanced subscription of e-Books.
7. The supplier(s) whose tenders are approved shall appear in the university within
one week for execution of an agreement.
8. The university reserves the right to reject any or all the tender without assigning any
reason thereof.
9. Supporting documents must have signature of the supplier with office seal.

1.7 Final Evaluation of Bids-

The final selection of the supplier/agency will be based on maximum discount offered
on publisher’s price by supplier/agency who has successfully qualified technical bid.
 PROFORMA FOR TECHINICAL BID

e-Books SUPPLIERS/ VENDORS SHOULD FURNISH THE FOLLOWING INFORMATION

ALONG WITH DOCUMENTARY EVIDENCE OF QUALIFYING TO SUPPLY e-Books
TO,HARCOURT BUTLER TECHNICAL UNIVERSITY, KANPUR, UTTAR PRADESH
(PERPETUAL)

1. Name of the Supplier/ Vendor

2. Complete Postal Address with

Tel. No., Fax,e-mail

3. State about the Financial Status

(You may attach balance sheet
for the last three years.

4. PAN (Permanent Account Number)

Allotted by the income tax Department.

5. Enclose your valid registration with

the Good Office Committee of the Federation
of Publishers & Book Sellers Association
of India or with any other national body.

6. Experience/Clientage-
(The Prospective supplier has to enclose
Photocopies of the minimum 03 latest work orders
of the university libraries for the supply of e-Books
(Indian and Foreign); government publications;
Enlist the organization’s served during last three years).

Signature of the Supplier with office seal

 PROFORMA FOR FINANCIAL BID (BOQ)

e-Books Maximum discount offered for e-Books on publisher’s

price
As per Annexure - I

Signature of the Supplier with office seal

 GENERAL TERMS AND CONDITIONS

1. e-Books are to be supplied F.O.R. Harcourt Butler Technical University, Kanpur ,Uttar
Pradesh.
2. Details of the e-Books like title, Author, Name of publisher, year of publication,
Edition/volume number, and price etc. should be clearly mentioned for each e-Book in
the approval memo and the respective bill.
3. Only latest editions and Low Priced editions should be supplied unless otherwise
specified.
4. Indian edition of the foreign books available in the market should be supplied.
5. The e-Books available in dual currencies should be billed in the currency by which the
converted cost is the lowest in Indian rupees with supporting proof.
6. The supplier shall be responsible for continued and smooth supply of e-Books.
7. All the e-Books are to be supplied within time limit from the date of purchase order.
8. The Competent authority, reserve the right to extend the prescribed period.
9. Conversion rates of foreign currency into Indian currency will be decided according to the
date of the bill with the supporting proof.
10. The bill should be sent in triplicate (three copies) with publisher’s invoice as the price
proof. The following certificate(s) be recorded on the bill:
a. Certified that the authorized publishers’ prices have been charged.
b. Certified that the latest editions have been supplied and these are not
remaindered titles.
c. Recording the Pan number
11. List of e-Books is enclosed but a few e-Books may be added/ deleted, in/from the list as
per the requirement(s) of the University.
12. The e-Books supplier shall take the responsibility of delivering the ordered titles to the
HBTU Kanpur without any additional charges.
13. The e-Books supplier will be required to ensure timely supply.
14. The e-Books supplier will mention the Title, Author, Name of publisher, year of publication,
edition/volume number, and price etc. in the invoice, which may please be sent in
triplicate for payment.
15. In case of Print version of e-book is available free, the supplier shall make necessary
arrangements for its access in the central library, H.B.T.U., Kanpur.
16. Partial payment is to be made after the supply of e-Books satisfactorily; therefore, e-
Books supplier should start the supply with immediate effect. If supplied satisfactorily, the
payment for subsequent supply will be done as per decision of competent authority. In
case, advance payment is necessary 100% Bank guarantee shall be furnished by the e-
Books supplier for the advance amount.
17. Refund of the unsupplied titles has to be made by the e-Books supplier and to be settled
in the same financial year.
18. Penalty for delay: if e-Book are not delivered within the approved delivery period, the
University reserves the right to impose penalty ½% of the purchase order amount per
week subject to a maximum of 5% of the value of order, provided it is not cancelled.
19. All disputes subject to Kanpur jurisdiction.
Annexure – I

SL. TITLE AUTHOR PUBLISHER

1. Financial Accounting Khatri TMHI
2. Cost Management (Blr-U) Kumar TMHI
3. Cost Accounting (Blr-U) Kumar TMHI
4. Financial Statement Analysis Subramanyam, KR TMHI
5. Accounting Made Easy 2nd edition Rajesh Agarwal TMHI
6. Organizational Behaviour: Core concepts Kinicki, Angelo TMHI
7. Entrepreneurship: A small business approach Bamford, Charles TMHI
Strategic Management: Creating competitive
8. advantages Dess, Gregory TMHI
9. Essential of Contemporary management Jones, Gareth TMHI
10. Business Communication Sethi TMHI
11. Manegerial Economics and Financial Analysis A.R.Aryasri TMHI
12. Macroeconomics 3rd edition Dwivedi TMHI
13. Managerial economic G.S. Gupta TMHI
14. Managerial economics Geetika TMHI
15. Marketing Research G. C. Beri TMHI
16. Stoichiometry 5 edition Bhatt McGraw Hill

17. Mechanical Operations 1 edition Swain McGraw Hill

18. Principles of Process Control D. Patranabis McGraw Hill

19. Chemical Process Industry Safety 1 edition K. S. N. Raju McGraw Hill

20. Introduction to process engineering and design Thakore/Bhatt McGraw Hill

21. Design of Steel Structures Duggal McGraw Hill
22. Basic Structure Analysis 3rd edition Reddy McGraw Hill
Waste Water Treatment for Pollution Control &
23. Refuse Asolekar McGraw Hill
24. Reinforced Concrete Design 3rd edition Pillai, S. U. McGraw Hill
25. Building Drawing S.Y. Patki McGraw Hill
26. Environmental Engineering Basak, N. N. McGraw Hill
Introduction to Fluid Mechanics & Fluid
27. Machines S. K. Som McGraw Hill
28. Analysis and Design of FRP reinforced Singh McGraw Hill
29. Concrete Technology Gambhir, M. L. McGraw Hill

30. Construction project Management Chitkara, bc punmia McGraw Hill

31. Surveying II 4th edition Duggal, S. K. McGraw Hill

32. Surveying I 4th edition Duggal, S. K. McGraw Hill

33. Engineering Hydrology Shrivastava McGraw Hill
34. Prestressed Concrete KrishnaRAJU McGraw Hill
35. Flow in Open Channels, 4 edition K. Subramanya McGraw Hill
36. Build & Construction Materials Gambhir McGraw Hill
37. Hydraulic Machine 1st edition Subramany McGraw Hill
38. Environmental Studies Shashi Chawla McGraw Hill
39. Integrated Solid Waste Management G. Tchobanoglous McGraw Hill

40. Referigeration and Airconditioning Arora McGraw Hill

41. Gas Turbine 3E Ganesn McGraw Hill
Mechatronics: Principles, Concepts and
42. Applications Mahalik McGraw Hill
43. Basic and Applied Thermodynamics, 2 E Nag McGraw Hill

44. Heat and Mass Transfer 3/E Nag McGraw Hill

45. CAD/CAM: Prin & Appl 3 E Rao McGraw Hill
46. Fluid Mechanics & Hydraulic Machines Subramanya McGraw Hill
Non- Destructive Test and Evaluation of
47. Materials Prasad McGraw Hill
48. Vibration and Acoustics Sujatha McGraw Hill
49. Machine Drawing 2nd editon Ajeet singh McGraw Hill
Machine Tools Design and Numerical Control
50. 3/e Mehta, N. K. McGraw Hill
51. An introduction to the Mechanics of Solids Stephan H. Crandall McGraw Hill
52. Industrial Robotics Groover McGraw Hill
53. Power Plant Engineering Nag McGraw Hill
54. IC Engines Ganesan McGraw Hill
55. Mechanics of Materials Beer McGraw Hill

56 Engineering Thermodynamics Nag, P. K. McGraw Hill

57. Turbomachinery Dubey McGraw Hill
Reverse Engineering: Mechanisms, Structures, McGraw Hill
58. Systems & Materials Robert W. Messler Education
Clair Sawyer, Perry
Chemistry for Environmental Engineering and Mccarty, Gene McGraw Hill
59. Science Parkin Education
Fluid Mechanics (Fundamental and Yunus Cengel, John Tata Mcgraw
60. applications); 2nd edition Cimbala Hill
Heat and Mass Transfer: Fundamentals and Yunus Cengel and
61. Applications (SIE); 5th edition Afshin Ghajar McGraw Hill
 Walter L. Badger,
Julius T. Banchero, McGraw Hill
62. Introduction to Chemical Engineering Julius T. Bancheo Education
Introduction to Chemical Engineering J. M. Smith and H. McGraw Hill
63. Thermodynamics C. van Ness Education
McGraw Hill
64. Mass Transfer Operations Robert E. Treybal Education
Perry's Chemical Engineers' handbook, 9th Don Green and McGraw Hill
65. edition Marylee Z. Southard Education
Plant Design and Economics for Chemical Peters M. S. and Mc Graw
66. Engineers, 5th international edition Timmerhaus K. D. Hill,2004
Tata Mcgraw
67. Principles of industrial instrumentation Patranabis, D. Hill, 2008
McGraw Hill,
68. Process Heat Transfer, 1st edition Kern, D. Q. 2017
Process Modeling, Simulation and control for McGraw Hill
69. chemical engineering, 2nd edition Luyben W. L. Education, 2013
D. R., Coughnour McGraw Hill
70. Process System Analysis and Control and S. E. LeBlanc Education
Shreve's Chemical Process Industries,5th
71. edition Austin, G. T. McGraw Hill
Y. A. Cengel and M. McGraw Hill
72. Thermodynamics: An engineering approach A. Boles Education
Unit Operations of Chemical Engineering, 7th McCabe, W., Smith
73. edition J. and Harriott P. McGraw Hill
Waste Water Engineering (Treatment and
74. Reuse) Metcalf and Eddy McGraw Hill
Pearson
75. 3 D Printing James Floyd Kelly Education
Inderjit Chopra, Cambridge
76. Smart Structure Theory Jayanti Sirohi University Press
Mathivanan G. AIRWALK
77. Computer Programming and Numerical Method Maria Anu V Publications
Ramchandran S., AIRWALK
78. Strength of Materials George V. J. Publications
Fluid Mechanics - Hydraulic & Hydraulic Standard book
79. Machines Modi & Seth House
Laxmi
80. Fluid Mechanics and Hydraulic Machines R. K. Bansal Publication
81. Structural Analysis R. C. Hibbeler Pearson
Computer Aided Design of Chemical Process Narayanan
82. Equipment Bhattacharya NCBA; 2012
 Khanna
83. Analysis of Structure Vazirani & Ratwani Publication
Khanna
84. Irrigation engineering and Hydraulic Structure S. K. Garg Publication
Khanna
85. Environmental Engineering Vol-I S. K. Garg Publication
Khanna
86. Environmental Engineering Vol-II S. K. Garg Publication
Khanna
87. Elements of Petroleum Refinery Engineering O.P. Gupta Publishers

88. Petroleum Refining Technology Ram Prasad Khanna

Nem Chand &
89. Highway Engineering Khanna & Justo Bros
Nem Chand &
90. Airport Engineering Saxena and Arora Bros
Nem Chand &
91. Railway Engineering Saxena and Arora Bros
New Age
International
92. Basic and applied soil mechanics Gopal Ranjan & Rao Publishers
New Age
International
93. Geotechnical Engineering Venkat Ramaiha Publishers
Prentice Hall of
94. Foundation Engineering P. C. Verghese India
Wastewater Treatment: Concept & Design G. L. Kalra & R. A.
95. approach Christian Prentice Hall
Essentials of Soil Mechanics and Foundations,
96. Basic geotechnics McCarthy, D. F. Prentice Hall

97. Engineering Graphics With Autocad 2009 Bethune Prentice hall

Arnold; Chapman;
98. Introduction to Material Management Clive Prentice Hall
Control software for Mechnical System: Object- Auslander; Ridgely;
99. oriented design in a real time world Ringgenberg Prentice Hall
Engineering design and graphics with solid
100. works Bethune Prentice Hall
Industrial Ecology and Sustaianable
101. engineering Graedel; Allenby Prentice Hall
102. Mechnics of Materials Hibbler Prentice Hall
Design and Implementation of Intelligent
Manufacturing systmes: From Expert systems,
103. Neural Networks, to Fuzzy Logic Jamshidi Prentice Hall
104. Availability Engineering and Management for Lamb Prentice Hall
 Manufacturing plant performance

105. Statics and Strength of Materials Morrow; kokernak Prentice Hall

Prausnitz;
Molecular Thermodynamics of Fluid-Phase Lichtenthaler; De
106. Equilibria Azeved Prentice Hall
Automotive Service Management: Principles
107. into practice Rezin Prentice Hall
108. Advanced Strength and Applied Elasticity Ugural; Fenster Prentice Hall
109. Introduction to Engineering Experimentation Wheeler; Ganji Prentice Hall
110. Mechanics of Materials, SI edition Hibbeler, Russell Prentice Hall
111. Automotive Engines: Theory and Servicing Halderman Prentice Hall
Automotive Steering, Suspension and
112. Alignment Halderman Prentice Hall
113. Automotive Chassis Systems Halderman Prentice Hall
Automotive Fuel and Emissions Control
114. Systems Halderman; Linder Prentice Hall
A textbook of chemical engineering Prentice Hall of
115. thermodynamics K. V. Narayanan India
Prentice Hall
India Learning
116. Chemical Process Technology and Simulation Koyikal, S. Pvt Ltd. 2013
Prentice Hall of
117. Heat Transfer: Principles and Applications Dutta, B. K. India
Prentice Hall of
118. Industrial instrumentation and control Singh, S. K. India, 2016
Principles of Mass Transfer and Separation Prentice Hall of
119. Processes binay K. Dutta India
Prentice Hall
India Learning
120. Process Dynamics and Control Sarkar, P. K. Pvt Ltd.

121. Process simulation & control using ASPEN Amiya K. Jana PHI Learning
K. V. Narayanan, B. Prentice Hall of
122. Stoichiometry and process calculations Lakshmikutty India
Introduction to nanoscience and
123. nanotechnology; 1st edition Alain Nouailhat ISTE Ltd
Theory and Practice of industrial waste
124. treatment Nelson Nemerow Addison Wesley
Laxmi
125. Soil Mechanics and Foundation B. C. Punmia Publication
Laxmi
126. Wastewater Engineering B. C. Punmia Publication
IK international
publishing
127. Industrial Hygiene and Chemical safety M. H. Fulekar house
128. Theory of Structure S. Ramamurtham Dhanpat Rai
Charotar
Publishing
House

129. Docks and Harbours Engineering Rangwala

Blackie
Modern Dairy Technology, Vol. II Advances in Academic and
130. Milk Processing R. K. Robinson Professional
Asia Pacific
131. Leather Peter McGarry Holdings Pvt Ltd
Learning how to work with leather- include DIY JD-Biz
132. projects (how to series book 14) Dueep Jyot Singh Publishing

133. Handbag Designer 101 Emily Blumenthal Voyageur Press

Handbag Workshop: Design and sew the
134. perfect bag Anna M. Mazur Taunton Press
Wen Redmond's Digital Fiber Art: Combine
Photo & Fabric - create your own mixed-media
135. masterpiece Wen Redmond C&T Publishing

136. The Bag making Bible Lisa Lam David & Charles
Digital technology for Forensic footwear Matthew R. Benett
137. analysis and vertebrate Ichnology and Marcin Budka Springer
Bloomsbury
138. The sport shoe: A history from field to fashion Thomas turner Visual Arts
Mass customization and footwear: Myth,
salvation or Reality?: A comprehensive analysis
of the adoption of the mass customization Claudio Roberto
paradigm in footwear,.. Oriented shoe Boer and Sergio
139. enterprises research project 2007 Dulio Springer
Handbook of Footwear Design and Manufacture Woodhead
140. (Woodhead Publishing series in Textiles 141) A.Luximon Publishing
Paint and Surface Coatings (2nd edition) R. Lambourne & T. Woodhead
141. Theory and Practice A. Strivens Publishing

142. The Chemistry of Synthetic Dyes V8 K. Venkataraman Academic Press

Textile processing and properties; Preparation,
Dyeing, finishing and Performance (Textile Elsevier
143. Science and Technology Book 11) Ist Edition T.L Vigo Science
Aisa Pacific
Water, Sewage & Industrial Effluent Treatment Editorial Data Group Holding Pvt.
144. Plant & Equipment in India Ist edition Asia Ltd.
Advances in Dye Removal Technologies (green Sourav mondal,
chemistry and sustanable technology) 1st Mihir kumar,Purkait ,
145. edition2018 Shirshendu De. Springer
 I.K. international
Bioremedaition: current Research and publishing
146. Applications and Ashok K. Rathore House
Nanotechnology in Water and Wastewater Amimul Ahsan
Treatment: Theory and Applications (Micro and (Editor), Ahmad
147. Nano Technologies) Ist Edition Fauzi Ismail (Editor) Elsevier
Current developments in Biotechnology and Duu-Jong Lee and
Bioengineering: Biological Treatment of Patrick C.
148. Industrial Effluents Ist edition Hallenbeck Elsevier
Alexandru
Grumezescu Alina
149. Food Packeging and Preservation Maria Holban Elsevier
Waste management for the food industries,
150. academic press 2008 I.S. Arvanitoyannis Elsevier
Heterogenous Catalysis: fundamentals and
151. applications, 1st edition Julian R. H. Ross Elsevier
152. Food Science NN Potter Springer

153. Food analysis , 3rd edition Nielson, S. Suzanne Springer

Computional methods for flow and transport in
154. porous Media J.M. Crolet Springer
Nigel Horan (Editor),
Anaerobic Digestion Processes: Applications Abu Zahrim Yaser
and Effluent Treatment (Green Energy and (Editor), Newati wid
155. Technology) Ist ed. (Editor) Springer
introduction to modeling and anlysis of
156. Stochastic system V.G. Kulkarni Springer
Paine, Frank A. Springer
157. A Handbook of Food Packaging Paine, Heather Y. Publications
Kramer A., Springer
158. Texture measurement of Foods Szczesniak A. S. Publications
A step by step approach to the modelling of Lilian Maria,
159. chemical engineering process Ferrarescolona Springer
Springer Handbook of Nanotechnology, 4th
160. edition Bhusan, B. Springer
Statistics for chemical and process engineers: A
161. modern approach, 1st edition Yuri A. W. Shardt Springer
New Food Product Development: From
162. Concept to Marketplace, Third Edition Gordon W. Fuller CRC Press
EYK. Ng, Jen Hong
Tan, U. Rajendra
Acharya Jasjit S.
163. Humaen Eye Imaging and Modeling Suri CRC Press
Lactic Acid Bacteria: Microbiological and
164. Functional Aspects Seppo Salminen CRC Press
165. Food Packaging: Principles and Practice Robertson, G.L. CRC Press
Graham G. Stewart,
166. Handbook of Brewing Inge Russell CRC Press
 CRC Press,
Handbook of Fuit Science and Technology, D. K. Salunkhe and Taylor and
167. Production s. S. Kadam Francis Group
CRC Press,
Advances in Post harvest Fruit and Vegetable B. H. Wills-Ron and Taylor and
168. Technology J. B. Golding Francis Group
L. K. Wang, Y. T. CRC Press,
Waste Treatment in the Food Processing Hung and C. Taylor and
169. Industry Yapijakis Francis Group
170. Introduction to Composite Materials Design Ever J. Barbero CRC Press

171. Chemical Process Calculations K. Asokan CRC Press

N. Grey, M. Calvin,
172. Instrumental methods of analysis S. C. Bhatia CRC Press
G. Louis hornyak,
Joydeep Dutta,
Harry F. Tibbals and
173. Introduction to Nanoscience Anil K. Rao CRC Press
Modeling and Simulation of Chemical Process
174. Systems, 1st edition Nayef Ghasem CRC Press
Process modeling and simulation in chemical,
175. biochemical and environmental engineering A. K. verma CRC Press
Introduction to Numerical Programming: A
practical guide for scientists and engineers
176 using Python and C/C++ Titus A. Beu CRC Press
Ghasem Nayef
177. Computer methods in chemical engineering ghasem CRC Press
Rakshit Ameta,
178. Photocatalysis: Principles and applications Suresh C. Ameta CRC Press
Taylor and
179. Advanced soil mechanics B. M. Das Francis
Convetional and Advavced Food Processing Suvendu
180. Techniologies Bhattacharya Wiley Blackwel
181. Response surface methodology R.H.Myers Wiley
Numaerical Methods for Partial Differential
182. equations Vitoriano Ruas Wiley
Grey.S. Hoftman
183. Inflammatry Desease of Blood Vessels Cornelia M. Weyand Wiley
Enzymes Technologies: Metagenomics, Wu-Kuang Yeh ,
184. Evolution, Biocatalysis and Biosynthesis Hsiu- Chiung Yang Wiley
Light Scattering, Size exclusion
chromatography and Asymmetric Flow Field
Flow Fractionation: Powerful tools for the
characterization of Polymers, Proteins and
185. Nanoparticles Stepen Podzimek Wiley
186. Physical Properties of Macromolecules Laurence A. Belfiore Wiley
 Robert T. Mathers
Green Polymerization Methods: Renewable (Editor), Michael A.r.
187. starting materials, catalysis and waste reduction Meier (Editor) Wiley
Optimization of Polymer Nanocomposite
188. properties Vikas Mittal (Editor) Wiley
Poulos, H. G. and
189. Pile foundation Analysis and Design Davis John wiley
Ivana Kovacic,
190. Mechanical Vibration Dragin Radomirovic Wiley
Chemcial Engineering modeling, simulation and
191. similitude Tanare G. Dobre Wiley VCH

192. Chemical Process Simulation Asghar Husain Wiley Blackwell

John Wiley,
193. Chemical Reaction Engineering; 3rd edition Levenspiel, O. 2006
Distillation Design and Control using Aspen John Wiley and
194. Simulation Luyben William L. Sons
Douglas C.
195. Design and Analysis of Experiments; 8th edition Montomery Wiley, 2013
Felder, R. M. and John Wiley and
196. Elementary principles of chemical processes Rousseau, R. W. Sons
Modeling and Simulation using MATLAB-
197. simulink Shailendra Jain Wiley
Process modeling and simulation for chemical
198. engineers, theory and practise Simant ranan upreti Wiley publisher
D. F. Rudd and C. Joh wiley &
199. Strategy of process engineering, 1st edition C. Watson Sons
Principles of adsorption and adsorption John Wiley and
200. processes Douglas M. Ruthven Sons,1984
Chemical and Biomedical engineering
201. calculations using python, 1st edition Jeffrey J. Heys Wiley
John Wiley &
202. Convection Heat Transfer, 3rd edition Adrian Bejan sons
Robert J. Farrauto,
Catalytic Air Pollution Control: Commercial Ronald M. Heck,
203. Technology, 3rd edition Suresh T. Gulati Wiley
Chemical and Engineering Thermodynamics, John Wiley &
204. 3rd rev. edition Stanley I. Sandler sons
K. Roel Westerterp,
w. P. M. Van Swaaij,
Chemical Reactor Design and operation, 2nd A.A.C.M.
205. edition Beenackers Wiley Blackwell
 Society for
industrial and
Lee. A. Segel, Leah applied
206. A Primer on Mathematical Models in Biology Edelstien-Keshet Mathematics
Suzaan lenhart, Chapan And
207. Optimal Control Applied to Biological models John. T. Wokman HALL/CRC
American Water
Standard Methods for the Examination of Water works
208. and Wastewater, 23rd edition R. B. Baird (Editor) Association
Scott Wilfred
209. Standard methods of Chemical Analysis Welday Andesite Press
210. Molecular Spectroscopy Dogra Pearson india
211. Quantum chemistry and spectroscopy Engel Pearson
212. Fundalmentals of Physical Chemistry Ganguly Pearson india
213. Chemistry of Hazarduos Material Meyer PHI
Pearson
214. Basic concepts of inorganic chemistry Singh Eduication india
215. Basic concepts of organic chemistry Singh Pearson india

Pearson
216. Principles of chemistry : A Molecular Approach Tro Education Ltd
217. Laboratory Mannual of Enggineering Chemistry Patra Pearson Iandia
John Dean, Hollmes
, A David.A M
218. practical Skills in chemistry ,Jaones, J Weyers Pearson
Weiss;Greco;Rickar
219. Experiments iun general chemistry d Pearson
Peasrson
220. Essential organic chemistry, Globle Edition Bruice Education LTD
Pearson
221. Engineering Chemistry Maheswaramma Education
Lambert;
Gronert;shurvell;Lig
222. Oragnic Srtuctural Spectroscopy htner;Cooks Pearson
Pearson
223. Engineering Mechanics Babu Education India
Chapman, Steve; Pearson
Introduction of Materials Management, global Gatewood, Ann K; Education
224. edition Arnold, Tony K. Limited
Pearson
225. Mechanics Datta Education India
Pearson
226. Mechanical Behavior of Materials Dowling Education
 Goldstein; Poole;
227. Classical Mechanics Safko Pearson
Automation, Production Systems, and
228. Computer - integrated manufacturing Groover Pearson India
Work Systems: The methods, Measurement &
229. Management of Work Groover Pearson
230. Adaptive Filter Theory Haykin Pearson
Giesecke;
Mitchell;Spencer;
231. Engineering Graphics Hill; Dygdon;Novak Pearson
232. Engineering Vibrations Imman Pearson
Finite Element method with applicaations in Pearson
233. Engineering Desai, Eldho; Shah Educatrion
Pearson
234. Experimental Stress Analysis Jindal Education india
Pearson
235. Material Science and Metallurgy jindal Education India
Pearson
236. Strength of Materials Jindal Education India
Pearson
237. Machine Drawing Junnarkar Education India

238. Basic Mechanical Engineering Kumar Pearson India

239. Thermodynamics Kumar Pearson India

Finite Element Analysis: Theory and applicaton Pearson
240. with ANSYS, global edition Moaveni, Saeed Education
Pearson
241. Mechanics of Solids Mubeen Education india
Pearson
242. Material Science and Metallurgy Parashivamurthy Education India
Pearson
Introduction to Material Science for Engineers, Education
243. Global Edition Shackelford Limited
Pearson
244. Strength of Materials Raj; Ramasamy Education India

245. Thermodynamics Gupta Pearson india

246. Power Plant Engineering Hegde Pearson

247. Engineering Drawing Shah Pearson India

248. Engineering Mechanics Sharma Pearson India
249. Applied Mechanics for Engineering Technology Walker Pearson
Pearson
Reinforced Concrete: Mechanics and Design, Education
250. Global edition Wight Limited
251. Mechanical Vibration in SI units Rao, Singiresu S. Pearson
252. Statics and Mechanics of Materials in SI units Hibbeler, Russell c. Pearson
253. Basic Mechanical Engineering 2ed Pravin Kumar Pearson
Pearson
254. Machine Drawing with AutoCAD Pohit; Ghosh Education India

255. Industrial Engineering Kumar Pearson India

An introduction to compuational fluid dynamics:
256. The finite volume method H. Versteeg Pearson
Pearson
257. Chemical Process Control Stephanopolous, G. Education India
Elements of Chemical reaction Engineering; 4th Pearson
258. edition Fogler, H. S. Education, 2015
Hougen, O. A.,
Chemical Process Principles Part I: Material Watson, K. M. and CBS Publishers
259. and Energy Balances Ragatz, R. A. & Distributors
Distillery Wastewater Pollution and Ram Chandra and
260. Bioremediation Sangeeta Yadav CBS Publisher
K. V. Narayana, B.
261. Mass Transfer: Theory and Applications Lakshmikutty CBS Publishers
262. Petroleum Refining Technology Indra Deo Mall CBS

263. Chemical Engineering Thermodynamics Y.V.C. Rao University Press

Applied process design for chemical and
264. Petrochemical Plants Ludwig, E. E. Gulf Publisher
Dryden's Outlines of Chemical Technology; 3rd Rao, M. G. and WEP East-West
265. edition Sittig, M. Press
Electrochemical Water treatment methods: Mika Sillanpaa, Butterworth
266. Fundamentals, Methods Marina Shestakova Heinemann
Electrochemistry and Electrochemical Createspace
267. Engineering: An introduction Alan C. West Independent
Christopher M. A.
Electrochemistry: Principles, Methods and Brett, Ana Maria Oxford Science
268. Applications Oliveira Brett Publicaation
Getting started with Matlab: A quick introduction
269. for scientists and engineers Rudra Pratap Oxford
 Mathematical Methods in Chemical Engineering Arvind Varma,
270. (indian edition) Massimo Morbidelli Oxford
Himalaya
H. Jadhav & V. M. Publishing
271. Environmental Protection and Laws Bhosale House
World
Scienctific
Publishing
Fundamentals of Semiconductor Physics and R. Enderlein, N. J. Company
272. Devices Horing (1997)
Wei Cai, William D. Cambridge
273. Imperfection in Crystalline Solids Nix University Press
Marc Andre Meyers,
Krishan Kumar Cambridge
274. Mechanical Behaiour of Materials Chawla University Press
Cambridge
275. Light Emitting Diodes E. Fred Schubert University Press
Fundamentals of Materials for energy and David S. Ginley, Cambridge
276. Environmental sustainability David Cahen University Press
Electronic structure basic theory and practical Cambridge
277. methods Richard M. Martin University Press
Structrue of Materials An introduction to Marc De Graef, Cambridge
278. crystallography, Differaction and Symmetry Michael E. McHenry University Press
Fundamentals of Quantum Mechanics for Solid Cambridge
279. state Electronics and Optics C. L. Tang University Press
Magnetic Materials Fundamentals and Cambridge
280. Applications Nicola A. Spaldin University Press
Carbon Nanotube Science Synthesis, Cambridge
281. Properties and applications Peter J. F. Harris University Press
Cambridge
282. Magnetism and Magnetic Materials J.M. D. Coey University Press
Cambridge
283. Materials Science An intermediate text William F. Hosford University Press
Cambridge
284. Graphene Carbon in Two Dimensions Mikhail I. Katsnelson University Press
P. M. Chaikin, T. C. Cambridge
285. Principles of Condensed matter Physics Lubensky University Press
Cambridge
286. Nanostructures and Nanotechnology Dougla Natelson University Press
Cambridge
287. A first course in Digital Communication Nguyen/Shwedyk University Press
Cambridge
288. A foundation in Digital Communication Lapidoth University Press
 Cambridge
289. An Introduction to Statistical Signal Processing Gray/Davisson University Press
Cambridge
290. A life scientist guide to physical chemistry Roussel University Press
Anatomy of Gene regulation: A three Cambridge
291. dimensional sturctural analysis TSonis University Press
Cambridge
292. Biochemistry and Physiology of the neutrophil Edwards University Press
Cambridge
293. Biological Thermodynamics 2nd edition Haynie University Press
Cambridge
294. Chemical Genomics Fu University Press
G Protein - coupled receptors: Structure, Cambridge
295. signalling, Physiology Siehler-Milligan University Press
Label - Free biosensors: Techniques and Cambridge
296. applications Cooper University Press
Cambridge
297 Molecular Imaging with Reporter Genes Gambhir/Yaghoubi University Press
Principles and Techniques of Biochemistry and Cambridge
298. Molecular Biology Wilson/ Walker University Press
The molecular origins of Life: Assembling Cambridge
299. Pieces of the Puzzle Brack University Press
The PCR revolution: Basic Technologies and Cambridge
300. Applications Bustin University Press
Ratledge/Kristianse Cambridge
301. Basic Biotechnology n University Press
Cambridge
302. Biotechnology 5th edition Smith University Press
Cambridge
303. Gene cloning and manipulation Howe University Press
Bacterial Disease Mechanisms: An introduction Wilson/McNab/Hend Cambridge
304. to cellular Microbiology erson University Press
Cambridge
305. Bacterial Physiology and Metabolism Kim/ Gadd University Press
Allsopp/Seal/Gaylar Cambridge
306. Introduction to Biodeterioration 2nd edition de University Press
Heritage/ Cambridge
307. Introductory Microbiology Evans/Killington University Press
Heritage/ Cambridge
308. Microbiology in Action Evans/Killington University Press
Cambridge
309. Molecular Fungal Biology Oliver/Schweizer University Press
 Cambridge
310. Endothelial Biomedicine Aird University Press
Cambridge
311. General Techniques of Cell Culture Harrison/Rae University Press
Cambridge
312. Marrow Stromal Cell Culture Beresford/Owen University Press

Cambridge
313. The biological Basis of Cancer McKinnell et. al. University Press

Cambridge
314. A Guide to Experimental Algorithmics McGeoch University Press
A Guide to MATLAB: for Beginners and Hunt/Lipsman/Rose Cambridge
315. Experienced users nberg University Press

A Practical Handbook for Software Cambridge

316. Development Birrell/Ould University Press

Cambridge
317. Algorithmic Aspects of Machine Learning Moitra University Press

An Introduction to Support vector machines and Christianini/Shawe- Cambridge

318. other kernel - based learning methods Taylor University Press

Aspect - Oriented, Model - Driven Software Rashid/ Royer/ Cambridge

319. Product lines: The AMPLE way Rummler University Press

Cambridge
320. Brain - Computer interfacing: An introduction Rao University Press

Computational Complexity: A Conceptual Cambridge

321. Perspective Goldreich University Press

Computational logic and human thinking: How Cambridge

322. to be artificially intelligent Kowalski University Press

Cambridge
323. Concepts in Programming Languages Mitchell University Press
Cambridge
324. Digital Logic Design: A Rigorous Approach Even/Median University Press

Discrete Mathematics: An introduction for Cambridge

325. software engineers Piff University Press
 Cambridge
326. Fundamental of Computer Vision Snyder/Qi University Press

Fundamentals of OOP and data structures in Cambridge

327. JAVA Wiener/Pinson University Press

Human and Machine Hearing: Extracting Cambridge

328. Meaning from sound Lyon University Press

Cambridge
329. Introduction to Distributed Algorithms Tel University Press

Cambridge
330. Introduction to Parallel Computing Crech University Press
Knowledge Representation, Reasoning and the
design of intelligent agents: The answer - set Cambridge
331. programming approach Gelfond/Kahl University Press

Cambridge
332. Langurage, cognition and computational models Poibeau/Villavicen University Press

Mathematics of Digital Image: Creation, Cambridge

333. Compression, Restoration, Recognition Hoggar University Press
Mobile Robotics: Mathematics, Models and Cambridge
334. Methods Kelly University Press

Model - based software testing and analysis Cambridge

335. with C# Jacky et al University Press

Object oriented programming with Visual Basic. Cambridge

336. NET McMillan University Press

Programming in Visual Basic 2010: The very Cambridge

337. beginner's guide McKeown University Press

Cambridge
338. Randomized Algorithms Motwani - Raghavan University Press

Software Modelling and Design: UML, use Cambridge

339. cases, patterns and software architectures Gomaa University Press

Cambridge
340. Software Testing Singh University Press
 Cambridge
341. The Elements of JavaTM Style Vermeulen et al University Press

Cambridge
342. The elements of UMLTM 2.0 Style Ambler University Press
The object primer: Agile model-driven Cambridge
343. development with UML 2.0 3rd edition Ambler University Press

Cambridge
344. The Quest for Artificial Intelligence Nilsson University Press

Understanding machine learning: from theory to Shalev- Cambridge

345. algorithm Shwartz/Ben- David University Press
Gas Sensors Based on Conducting metal
oxides basic understanding, technology and Nicolae Barsan,
346. applications Klaus Schierbaum Elsevier

347. Food Process Engineering & Technology Zeki Berk Elsevier

PC Based instrumentaion and control Design
348. and analysis of experimants Mike Tooley Elsevier
Food processing Technology: Principles and
349. Practice P. J. Fellows Elsevier
Ram Sarup Singh,
Biomass, Biofuels, Biochemical: Advances in Reeta Rani
350. Enzymes Technology Singhania et al Elsevier

J. R. Backhurst, J.
H. Harker, J. F.
Chemical Engineering Vol. I; Coulson & Richardson, J. M. Elsevier India,
351. Richardson Coulson 2014
Elsevier
Chemical Engineering Vol. 2; Coulson & Science, 5th
352. Richardson Richardson, J. F. edition, 2014
Elsevier
Chemical Engineering Vol. 3; Coulson & J.F. Richardson and Butterworth-
353. Richardson D. G. Peacock Heinemann
Elsevier
Chemical Engineering Vol. 4; Coulson & Coulson & Butterworth-
354. Richardson; 2nd edition Richardson Heinemann
Elsevier
Chemical Engineering Vol. 5; Coulson & J.R. Backhurst & H. Butterworth-
355. Richardson; 2nd edition Harker Heinemann
Elsevier
Chemical Engineering Vol. 6; Coulson & Butterworth-
356. Richardson; 2nd edition R.K. Sinnot Heinemann
Microbial Enzymes in Bioconversions of
Biomass and (Biofuels and Biorefinery
357. Technologies Book 3) Vijay Kumar Gupta Springer
 Heldman , D.R. and
358. Food Process Engineering R.P.singh Springer
359. Lawrie's Meat Science 6th ed. R. A Lawrie Elesevier

360. Computer Application In food technology Paul Singh R. Elsevier

Practical Design, Construction and Operation of Elsevier
361. Food Facilities J. Peter Clark Science
Tilak
Nagodawithana, Elsevier
362. Enzymes in Food Processing Gerald Reed Science
Oxford
363. Electrical Properties of Materials Laszlo Solymer University Press
Safety and Hazards Management in chemical Atlantic
364. industries M. N. Vyas Publishers
Rishal
M. Subbu, D. K. Publication,
365. GATE way to chemical engineering Vol. 1 Sandilya 2018
Rishal
M. Subbu, D. K. Publication,
366. GATE way to chemical engineering Vol. 2 Sandilya 2018

Paramji S. Panesar,
Satwinder S. IK International
Enzymes in Food Processing: Fundamentals Marwaha, Harish Publishing
367. and Potential Applications Kumar House
Application of Alternative Food Preservation Antonio Bevilacqua,
Technologies to Enhance Food Safety and Maria Rosaria Bentham e-
368. Stability Corbo book
Handbook of Nutraceuticals and Functional Taylor & Francis
369. Foods Wildman REC Inc
370. A Textbook of Microbiology D.K. Maheshwari S. Chand
Young Je Yoo, Yan
371. Fundamentals of Enzyme Engineering Feng Springer
Suresh Kumar
Plant Biotechnology: Recent Advancement and Gahlawat, Raj
372. Developments Kumar salar, et al Springer
Deformation and Fracture Behaviour of Polymer Rellman, Wolfgang,
373. Materials Langer, Beate Springer
Rahaman,
Mostafizur, Khastgir,
Dipak, Aldalbahi, Ali
374. Carbon-containing polymer composties Kanakhir Springer
375. Fatigue of Materials S. Suresh University Press
Microbial Technology: Fermentation H. J. Peppler, D.
376. Technology Perlman Academic Press
 Distillation: fundamentals and principles, 1 st Andrzej gorak, Eva
377. edition Sorensen Academic Press
Nace
International
378. Coating Failure Analysis Jon Cavallo Co.
Hans Joachim, Vincentz
BASF Handbook - Basics of Coating Strietberger & Arthur Network GmbH
379. Technology Goldschmidt & Co. KG
Vincentz
U Poth, R. Schwalm Network GmbH
380. Acrylic Resins & M. Schwartz & Co. KG
Vincentz
Volkmar Stenzel & Network GmbH
381. Functional Coatings Nadine Rehfeld & Co. KG
Vincentz
Network GmbH
382. High Solid Binders Mircea Manea & Co. KG
Vincentz
Network GmbH
383. Nanotechnology Stefan Sepeur et.al. & Co. KG
Michael Dornbusch, Vincentz
Ulrich Christ & Rob Network GmbH
384. Epoxy Resins Rasing & Co. KG
Vincentz
Network GmbH
385. Pigment Processing Juan M. Oyarzun & Co. KG
Vincentz
Wernfried Heilen & Network GmbH
386. Silicone Resins and their Combinations Sescha Herworth & Co. KG
Vincentz
Powder Coatings Chemistry and Technology Network GmbH
387. (3rd revised edition) Emmanouil Spyrou & Co. KG
Vincentz
Guido Wilke & Network GmbH
388. Coatings for plastics Jurgen Ortmeier & Co. KG
Vincentz
Network GmbH
389. Understanding Additives Bodo Muller & Co. KG
Vincentz
Network GmbH
390. Additives for waterborne coatings Wernfried Heilen & Co. KG
Vincentz
Network GmbH
391. Automotive Coatings Formulation Ulrich Poth & Co. KG
Vincentz
Network GmbH
392. Radiation Curing Coatings and Printings Inks Patrick Glockener & Co. KG
 Vincentz
Manfred Schwartz & Network GmbH
393. Waterbased Acrylates for Decorative Coatings Roland Baumstark & Co. KG
Vincentz
Bodo Muller & Ulrich Network GmbH
394. Coatings Formulation 3rd revised edition Poth & Co. KG
Ashok K. Batra;
395. Power Harvesting via Smart Materials Almuatasim Alomari SPIE Press

396. Simulation Modeling and Analysis Averill M. Law SEM

Laxmi
397. Petrochemical Process Technology Indra Deo Mall Publications

398. Nanoscience and Nanotechnology B. K. Parthasarathy Isha Books

Absorption fundamental and applications, 1st R. Zarzycki, A.
399. edition Chacuk Pergamon
Anaerobes in biotechnology ( Advances in Rajni hatti -kaul,
biochemical engineering / biotechnology book gashaw mamo , & 1
400. 156) more Springer

401. Introduction of Food Processing Engineering P.G. Smith Springer

Rajeev K. Varshney,
402. Plant Genetics and Molecular Biology Manish K. Springer
Bioelectrosynthesis (Advances in Biochemical Falk Harnisch, Dirk
403. Engineering/Biotechnology Book 167) Holtmann Springer
Biothermodynamics: The Role of Urs Von Stocker,
Thermodynamics in biochemical Engineering Luuk A. M. Van der
404. 1st edition Wielen EPFL Press
GOPALAN, N. P. ,
AKILANDESWARI,
405. WEB TECHNOLOGY : A Developer J. PHI
THEORY OF COMPUTER SCIENCE : Mishra, K.L.P.,
AUTOMATA, LANGUAGES AND CHANDRASEKARA
406. COMPUTATION N, N. PHI
DESAI, SANDEEP ,
SRIVASTAVA,
407. SOFTWARE TESTING : A Practical Approach ABHISHEK PHI
SOFTWARE QUALITY AND TESTING : A
408. CONCISE STUDY KELKAR, S. A. PHI

409. SOFTWARE ENGINEERING JAMES, K. L. PHI

RAJARAMAN, V.,
PARALLEL COMPUTERS Architecture and MURTHY, RAM C.
410. Programming SIVA PHI
 NEURAL NETWORKS, FUZZY SYSTEMS AND RAJASEKARAN, S.,
EVOLUTIONARY ALGORITHMS : Synthesis PAI, G. A.
411. and Applications VIJAYALAKSHMI PHI

412. NETWORK SECURITY AND MANAGEMENT Singh, Brijendra PHI

BHARATI AKSHAR,
CHAITANYA
NATURAL LANGUAGE PROCESSING: A VINEET, SANGAL
413. PANINIAN PERSPECTIVE RAJEEV PHI

Bandyopadhyay,
414. Mobile Commerce Karabi PHI

KUMAR, S.
SWAPNA , LENINA,
415. MATLAB: Easy Way of Learning SVB PHI

SINGH, Y. KIRANI ,
416. MATLAB PROGRAMMING CHAUDHURI, B. B. PHI
INTRODUCTION TO THEORY OF
AUTOMATA, FORMAL LANGUAGES, AND
417. COMPUTATION GHOSH, DEBIDAS PHI
SASIKUMAR M.,
INTRODUCTION TO PARALLEL Shikhare, Dinesh,
418. PROCESSING Prakash, Ravi P. PHI

419. Introduction to INFORMATION TECHNOLOGY RAJARAMAN, V. PHI

INTRODUCTION TO FUZZY SETS AND
420. FUZZY LOGIC GANESH, M. PHI
SHINGHAL,
421. Introduction to FUZZY LOGIC RAJJAN PHI

INTRODUCTION TO DIGITAL COMPUTER RADHAKRISHNAN,

422. DESIGN, AN T., RAJARAMAN, V. PHI

FUNDAMENTALS OF COMPUTER GRAPHICS

423. AND MULTIMEDIA MUKHERJEE, D. P. PHI
FUNDAMENTALS OF OPEN SOURCE
424. SOFTWARE Rao, M.N. PHI
KUNDU,
425. Fundamentals of Computer Networks SUDAKSHINA PHI

DIGITAL IMAGE PROCESSING AND PAKHIRA, MALAY

426. PATTERN RECOGNITION K. PHI
427. DIGITAL IMAGE PROCESSING AND CHANDA, PHI
 ANALYSIS BHABATOSH,
MAJUMDER,
DWIJESH DUTTA

DIGITAL IMAGE PROCESSING : An

428. Algorithmic Approach Joshi, Madhuri A. PHI
NATARAJAN, R.
429. DIGITAL DESIGN ANANDA PHI
DAS GUPTA,
PRANAB KUMAR,
Developing Web Applications Using ASP.NET MONDAL,
430. and Oracle RAMPROSAD PHI
DESIGN METHODS AND ANALYSIS OF
431. ALGORITHMS BASU, S. K. PHI
PANNEERSELVAM,
432. DESIGN AND ANALYSIS OF ALGORITHMS R. PHI
KABAT, MANAS
433. DESIGN AND ANALYSIS OF ALGORITHMS RANJAN PHI

MOHAN, I.
434. DESIGN AND ANALYSIS OF ALGORITHMS CHANDRA PHI
PAKHIRA, MALAY
435. Database Management System K. PHI
DATA WAREHOUSING : Concepts,
436. Techniques, Products and Applications PRABHU, C.S.R. PHI
N.S. KUTTI, PH.D.,
(DEAKIN)|P.Y.
PADHYE, DR. ING.,
437. DATA STRUCTURES IN C++ (DRESDEN) PHI
NAIR,
ACHUTHSANKAR
438. Data Structures in C S. ,Mahalekshmi, T. PHI
KUSHWAHA,
DHARMENDER
DATA STRUCTURES A PROGRAMMING SINGH, MISRA,
439. APPROACH WITH C ARUN KUMAR PHI
GOPALAN, N. P. ,
440. DATA MINING : Techniques and Trends SIVASELVAN, B. PHI
McGraw Hill
441. IT TOOLS AND BUSINESS SYSTEMS ISRD GROUP Education
McGraw Hill
442. SOFTWARE TESTING LIMAYE Education
DATA STRUCTURES AND ALGORITHMS:
CONCEPTS, TECHNIQUES AND McGraw Hill
443. APPLICATIONS PAI Education

McGraw Hill
444. PROGRAMMING WITH C++, 3/E RAVICHANDRAN Education
 McGraw Hill
445. TEST YOUR SKILLS IN C, 2/E SELVI Education

McGraw Hill
446. An Introduction To Programming Through C++ Abhiram G. Ranade Education

Smruti Ranjan McGraw Hill

447. Computer Organisation & Architecture Sarangi Education

McGraw Hill
448. Introduction to Robotics, 2e S K Saha Education
McGraw Hill
449. SOFTWARE RELIABILITY ENGINEERING SUBBURAJ Education

Comprehensive Introduction to Object-Oriented McGraw Hill

450. Programming With Java, A Wu, C Education
CRYPTOGRAPHY AND NETWORK McGraw Hill
451. SECURITY KAHATE Education
McGraw Hill
452. NEXT GEN MOBILE COMMUNICATION KAPPAL, RISHI Education

McGraw Hill
453. WIRELESS COMMUNICATIONS JAGANNATHAM Education
McGraw Hill
454. SOFTWARE ENGINEERING NARANG, RAJESH Education
McGraw Hill
455. Software Testing RAJANI Education

McGraw Hill
456. Object-Oriented Design Using Java Skrien, Dale Education
McGraw Hill
457. Information Systems Essentials Haag, Stephen Education

Information Systems Solutions: A Project McGraw Hill

458. Approach Van Horn, Richard Education

McGraw Hill
459. Business Driven Information Systems Baltzan, Paige Education
McGraw Hill
460. INTRODUCTION TO DATABASE SYSTEMS BRESSAN Education

STRUCTURING DATA & BUILD ALGOR McGraw Hill

461. UPDATED CHAI/WHITE Education

INTRO TO DESIGN & ANALYSIS OF McGraw Hill

462. ALGORITHMS LEE Education
 McGraw Hill
463. OBJECT-ORIENTED TECHNOLOGY TSANG Education

McGraw Hill
464. Object-Oriented Software Engineering Schach, Stephen Education

McGraw Hill
465. COMPUTER PROGRAMMING BALAGURUSAMY Education

McGraw Hill
466. APPLIED MACHINE LEARNING GOPAL Education

McGraw Hill
467. WIRELESS COMM & NET MISRA Education

McGraw Hill
468. Data Structures using C Balagurusamy Education

McGraw Hill
469. Object Oriented Analysis & Des Jeya Mala Education
McGraw Hill
470. Algorithms Dasgupta Education

McGraw Hill
471. Programming in ANSI - C Balagurusamy Education

Pearson
472. Database Concepts, Global Edition Kroenke, David Education India

Database Processing: Fundamentals, Design, Pearson

473. and Implementation, Global Edition Kroenke;Auer Education India

Pearson
474. Cryptography and Network Security Kumar; Bose Education India

Pearson
475. Data Structures and Algorithms in Java Lafore Education India

Pearson
476. Object-Oriented Programming in C++ Lafore Education India

Applying UML and Patterns: An Introduction to

Object-Oriented Analysis and Design and Pearson
477. Iterative Development Larman Education India
 Pearson
478. Introducing HTML5 Lawson;Sharp Education India
Managing Software Requirements: A Use Case Pearson
479. Approach Leffingwell Education India

Introduction to the Design and Analysis of Pearson

480. Algorithms Levitin Education India

Pearson
481. Java Software Structures Lewis Education India

Program Development in Java: Abstraction, Pearson

482. Specification, and Object-Oriented Design Liskov;Guttag Education India

Artificial Intelligence: Structures and Strategies Pearson

483. for Complex Problem Solving Luger Education India

Pearson
484. Data Structures and Other Objects Using C++ Main;Savitch Education India

Pearson
485. Software Architect Bootcamp Malveau Education India

Pearson
486. Concepts of Database Management System Naik Education India
Pearson
487. Fundamentals of Database Systems Navathe;Elmasri Education India

Introduction to Programming Using Visual Basic Pearson

488. 2008, An Schneider Education India

Concepts of Programming Languages, Global Pearson

489. Edition Sebesta Education India

Pearson
490. Data Structures using C Sharma Education India

Pearson
491. Programming in C++ Sharma Education India

Pearson
492. Software Engineering Sommerville Education India
 Pearson
493. Wireless Communications & Networks Stallings Education India

Deven N. Shah,
494. Object Oriented Software Engineering G.P. Bherde Wiley

Theory of Computation: A Problem-Solving

495. Approach Kavi Mahesh Wiley

Basavaraj S.Anami,
496. Formal Languages and Automata Theory Karibasappa K.G. Wiley

Deven N. Shah,
497. Object Oriented Software Engineering G.P. Bherde Wiley