LS14250 Datasheet 09 2023

LS 14250
Primary Li-SOCI2 cell
High energy density 3.6 V ½ AA size bobbin cell
Saft’s LS 14250 cell is ideally suited for

long-term applications (typically from 5 to
20+ years), featuring low base
currents and periodic pulses.
Benefits
• High capacity and high energy
(1024 Wh/l and 480 Wh/kg)
• High voltage response, stable during
most of the lifetime of the application
• Wide operating temperature range
(-60°C / +85°C)
• Low self-discharge, compatible with
a long operating life (less than 1% per
year of storage, at +20°C, after 1 year)
Electrical characteristics1
• Superior resistance to corrosion
• Low magnetic signature Nominal capacity (under 14 mA, +20°C, 2.0 V cut-off)3 1.2 Ah
Key features Open circuit voltage (at +20°C) 3.67 Ah

• Bobbin construction Nominal voltage (under 0.1 mA, +20°C) 3.6 V
• Well controlled passivation
Nominal energy 4.32 Wh
• Hermetic construction with glass-to-
metal seal Pulse capability 4
Up to 100 mA
• Stainless steel can Maximum recommended continuous current
• Non-flammable electrolyte 35 mA
• RoHS and REACH compliance For battery sizing, consult Saft
• Manufactured in France, China, UK Operating conditions
Designed to meet all major quality, Operating temperature range5 -60°C / +85°C (-76°F / +185°F)
safety and environment standards
Storage temperatures (max recommended)6 +30°C (+86°F)
• Safety: UL 1642, IEC 60086-4
• IEC 60079-11 part 10.5 (T4 temperature Physical characteristics2
rating at +60°C) Diameter (max) 14.62 mm (0.57 in)
• Transport: UN 3090 and UN 3091
Height (max) 25.13 mm (0.99 in)
• Quality: ISO 9001, Saft Excellence
System, continuous evaluation program Typical weight 9 g (0.31 oz)
Typical Applications Li metal content approx. 0.3 g
• Utility Metering Termination suffix
• Internet of Things CN, CNR Radial tabs
• Tracking systems
• Alarms and security 2 PF, 3 PF, 3 PF RP, 4 PF Radial pins
• Connected sensors CNA Axial leads
• Medical devices
FL Flying leads
Other configurations upon request
1
Typical values relative to cells stored up to one year at + 30°C max.
2
Sleeved cell.
3
Dependent upon current drain, temperature, cut-off and cell orientation.
4
Under 100 mA / 0.1 second pulses, drained every 2 minutes at + 20°C from undischarged cells during 24 h, with 10 µA base current, yield
voltage readings above 3.0 V after initial stabilisation. The readings may vary according to the pulse characteristics, the temperature,
and the cell’s previous history. Fitting the cell with a capacitor may be recommended in severe conditions or for high pulse currents.
Consult Saft.
5
Operation above ambient temperature may lead to reduced capacity and lower voltage readings. Consult Saft.
6
For more severe conditions, consult Saft.
LS 14250
Primary Li-SOCI2 cell
LS 14250 Typical discharge profiles at 20°C under various rates

o 14.4 + 0.2 3.8 V
o 4.5 min 3.6 V
3.4 V
3.2 V
3.0 V
1.5 + 0.2 2.8 V
2.6 V
2.4 V
2.2 V
24.5 + 0.3 2.0 V

0.0 Ah 0.2 Ah 0.4 Ah 0.6 Ah 0.8 Ah 1.0 Ah 1.2 Ah 1.4 Ah
 100Ω/32mA  200Ω/17mA  400Ω/9mA  1.8kΩ/2mA  3.6kΩ/1mA  10kΩ/0.3 mA  36kΩ/0.1mA
LS 14250 voltage plateau vs current and temperature (at mid-discharge)

3.8 V
0.3 + 0.1 3.6 V
3.4 V
3.2 V
o 7 min
3.0 V
Dimensions in mm of cells made in France 2.8 V
2.6 V
2.4 V
2.2 V
Storage 2.0 V
0.1 mA 1.0 mA 10.0 mA 100.0 mA
• The storage area should be clean, cool
 -40°C  -20°C  +20°C  +55C  +70°C
(preferably not exceeding +30°C), dry
and ventilated.
LS 14250 Capacity vs current at various temperatures
Warning 1.4 Ah
• Fire, explosion and severe burn hazard. 1.2 Ah

• Do not recharge, short circuit, crush,
disassemble, heat above 100°C. 1.0 Ah
(212°F), incinerate, or expose

0.8 Ah
contents to water.
• Do not solder directly to the cell (use 0.6 Ah
tabbed cell versions instead).
• Do not remove the cells from their 0.4 Ah
original packing before use.

• Do not store the cells in bulk to avoid 0.2 Ah
accidental short circuiting. 0.0 Ah

• Do not mix new and used cells or cells 0.1 mA 1.0 mA 10.0 mA 100.0 mA
from different origins.  -40°C  -20°C  +20°C  +55C  +70°C

• Mind the polarities of the cell.
26, quai Charles Pasqua

92300 Levallois-Perret - France
Document N° 31072-2-0923
www.saft.com Edition: October 2023
Data in this document is subject to change without
Saft, a subsidiary of TotalEnergies
notice and becomes contractual only after written
S.A.S. au capital de 26 724 876 € confirmation.
R.C.S. Nanterre 481 480 465 Photo credits: © Saft

LS14250 Datasheet 09 2023

Uploaded by

Copyright:

Available Formats

LS14250 Datasheet 09 2023

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

LS14250 Datasheet 09 2023

Uploaded by

Copyright:

Available Formats

LS 14250

Primary Li-SOCI2 cell

High energy density 3.6 V ½ AA size bobbin cell

Saft’s LS 14250 cell is ideally suited for

Key features Open circuit voltage (at +20°C) 3.67 Ah

LS 14250 Typical discharge profiles at 20°C under various rates

o 4.5 min 3.6 V

1.5 + 0.2 2.8 V

24.5 + 0.3 2.0 V

 100Ω/32mA  200Ω/17mA  400Ω/9mA  1.8kΩ/2mA  3.6kΩ/1mA  10kΩ/0.3 mA  36kΩ/0.1mA

LS 14250 voltage plateau vs current and temperature (at mid-discharge)

Dimensions in mm of cells made in France 2.8 V

• Fire, explosion and severe burn hazard. 1.2 Ah

(212°F), incinerate, or expose

original packing before use.

accidental short circuiting. 0.0 Ah

from different origins.  -40°C  -20°C  +20°C  +55C  +70°C

26, quai Charles Pasqua

You might also like