BUA-40 Application

Surge Protection
Device BUA-40 Surge Protection Device was designed and manufactured,
complying standard GB/T 18802.11/EN 61643-11, Rated voltage 385V, Maximum
discharge current 40KA,High Energy Varistor, high effective for lightning protection.

Appearance Introduction

1 Brand
2 Type
3 Max. Discharge Current I max
1 7
4 Nominal Discharge Current I n
5 Voltage Protection Level U p 2
6 Max. Continuous Operating Voltage U cpv 3
7 Indicator 4 8
5

Surge Protection Device

8 Standard Code 9
6
9 Certificate Symbol

Type Instruction
BUA - 40 / 3 385V
Prewired Modular Complete Unit,
Consisting of A Base Part and Plug-in
Protection Modules
Product Max. discharge Rated
Plug-in Protection Module, Easily code current Pole Voltage
Installation and Maintainance
High Energy Varistor, Response Time Surge
Less Than 25 Nanosecond Protection 40KA 3P 385V
Device
Optional Remote Signalling
Contact(FM) for Monitoring Device
(Floating Changeover Contact)
Din Rail Mounting TH35-7.5/DIN35
Parameter
BUA-40 Surge Protection Device
Pole 1P/2P/3P/4P
Standard GB/T 18802.11/EN 61643-11
Electrical Characteristics
Category IEC/EN IEC II/EN2
Max Continuous Operational Voltage Uc 385V AC
Nominal Discharge Current In(8/20)μs 20KA
Maximum Discharge Current Imax(8/20)μs 40KA
Voltage Protection Level Up ≤1.8KV
Response Time ≤25ns
Control and Indication
Operating State/fault Indication Green/Red
Plug-in Protection Module
Remote Signalling Max. Working Voltage(V) 30V DC
Contact(Optional) Max. Working Current 1A
Connection and Installation
Hard cable mm2 4~25
Wire
Flexible cable mm2 4~16
Terminal Screws M5
Main Circuit 2.5
Torque(Nm)
Remote Contact 0.25
Degree of Protection IP20
Installation Environment
Operating Temperature Range (TU) -40°C~+80°C
For Mounting on TH35-7.5/DIN35
Relative Humidity 30%~90%

114
 Principal Drawing

Wiring Method

AC Isolator Switches
Dimensions(mm)

X:number of poles (1P/3P/4P) number of poles (2P)

46. 5
91.6

84.2
35

36
5.5 44.5
L=18.5+(X-1)*17.5
69

115