Cat 962M ®

Wheel Loader
2017

The new 962M Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet
your high expectations for reliability, productivity, fuel efficiency, and long service life.
Meets U.S. EPA Tier 4 Final and EU Stage IV emission standards.

Reliability Ease of Operation

• Cat C 7.1 ACER T ™ engine and automatic Cat Regeneration System
®
• Bes t-in-class operator environment provides unmatched comfor t,
of fers increased power densit y with a combination of proven visibilit y, and ef ficiency.
electronic, fuel and air sys tems. • S teering wheel (E-H joystick steering option).
• Utilizing rigorous component design and machine validation processes • Intuitive, ergonomic controls and touch screen multifunction
results in unmatched reliabilit y, durabilit y and high uptime. display keep operators focused on their work .
• Ride control sys tem with dual accumulators provides excellent ride
Durability qualit y and lowers cab vibrations.

• Tough countershaf t powershif t transmission and axles handle

ex treme applications. Safety
• Full flow hydraulic filtration system with additional loop filtration • E xcellent cab access with wide door, remote door opening option
improves hydraulic system robustness and component life. and stair-like steps.
• Floor to ceiling windshield, large mirrors with integrated spot mirrors
Productivity and rear vision camera provide industr y leading all-around visibilit y.

• Engine power increased by approximately 11% improves machine

per formance and response (compared to H Series). Serviceability
• Lock-up clutch torque conver ter, combined with lock-to-lock shif ting, • One-piece tilting hood with side and rear doors; hydraulic and
delivers smooth shif ts, fast acceleration and speed on grade. electrical ser vice centers make access fast and easy.
• Optimized Z-bar linkage provides high breakout force at ground • Safe, ground level access to fuel fill and daily maintenance points
level along with excellent – 0°/+5° parallelism for precise work means less ser vicing time is required.
tool control. • Optional, fully integrated Cat Autolube system provides full lube
• Easy-to-load Per formance Series Buckets feature a wider mouth system monitoring and diagnostic tes t visibilit y.
and cur ved side plates that improve material retention (fill factor)
and decrease cycle times.
• On-the-go disc-t ype front manual dif ferential locks (front and rear
Cat Connect Technology
fully automatic option). • Monitor, manage and enhance job site operations.
• Optional auxiliar y counter weight option of fers slightly higher • Cat L INK Technologies: VisionL ink ® enables owners to access data
payload capabilit y for loose aggregate rehandling.* wirelessly to monitor machine health, utilization and location.
• Cat DE TEC T Technologies: Integrated rear vision camera enhances
visibilit y behind machine to help operators work safely. Optional Cat
Fuel Efficiency Rear Object Detection increases operator awareness of the working
• Up to 10% more fuel ef ficient than K Series and up to 2 5% more fuel environment which enhances site safet y.
ef ficient than H Series loaders.* * • Cat PAY LOAD Technologies: Optional Cat Production
• Power dense ACER T engine burns less fuel by providing power and Measurement 2.0 brings simple and accurate on-the-go payload
torque when needed. scale allowing operators to deliver exact loads and work
• S tandard productive Economy Mode provides maximum fuel more ef ficiently. Advanced Productivit y subscription provides
savings with minimal productivit y impact . comprehensive actionable information to help you manage and
improve the productivit y and profi tabilit y of your operations.
* *Optional configurations and equipment may var y from region to region and
requires conformance to Caterpillar payload policy. Consult your dealer or
Caterpillar representative for details.
* *Actual results may var y based on factors such as, but not limited to, machine
configuration, operator technique, machine application, climate, etc.
Cat 962M Wheel Loader
®

Engine Operating Specifications

Engine Model Cat C7.1 ACERT S tatic Tipping L oad – Full 4 0 ° Turn –
11 70 9 kg 2 5, 814 lb
Maximum Power @ 2 ,10 0 rpm – SA E J19 9 5 2 0 2 kW 2 71 hp with Tire Deflection
Maximum Power @ 2 ,10 0 rpm – ISO 14 3 9 6 201 kW 2 6 9 hp S tatic Tipping L oad – Full 4 0 ° Turn –
12 471 kg 2 7, 4 9 4 lb
Maximum Power @ 2 ,10 0 rpm – ISO 14 3 9 6 (metric) 2 73 hp No Tire Deflection
Maximum Net Power @ 2,10 0 rpm – SAE J13 4 9 18 6 kW 2 5 0 hp Breakout Force 189 kN 42 ,4 89 lbf
Maximum Net Power @ 2,10 0 rpm – ISO 924 9 18 6 kW 2 5 0 hp • For a machine configuration as defined under “ Weight.”
Maximum Net Power @ 2,10 0 rpm – ISO 924 9 (metric) 2 5 3 hp • Full compliance to ISO 14 39 71:20 07 Sections 1 thru 6, which requires
2% verification bet ween calculations and testing.
Peak Gross Torque (1, 3 5 0 rpm) – SA E J19 9 5 124 9 N·m 921 lbf-f t
Peak Gross Torque (1, 3 5 0 rpm) – ISO 14 3 9 6 124 5 N·m 918 lbf-f t
Maximum Net Torque (1, 3 5 0 rpm) 1172 N·m 8 6 5 lbf-f t Service Refill Capacities
Displacement 7.0 L 42 8 in³ Fuel Tank 275 L 72 .6 gal
• The air conditioning system on this machine contains the fluorinated DEF Tank 16 L 4.2 gal
greenhouse gas refrigerant R13 4a (Global Warming Potential = 14 3 0). Cooling System 59 L 15.6 gal
The system contains 1.6 kg of refrigerant which has a CO 2 equivalent Crankcase 22 L 5.8 gal
of 2.2 8 8 metric tonnes. Transmission 43 L 11. 4 gal
Dif ferentials and F inal Drives – Front 43 L 11.4 gal
Weights Dif ferentials and F inal Drives – Rear 43 L 11.4 gal
Operating Weight 2 0 2 26 kg 4 4, 5 91 lb Hydraulic Tank 125 L 3 3.0 gal
• Weight based on a machine configuration with Michelin 2 3.5R2 5 X HA 2
L 3 radial tires, full fluids, operator, s tandard counter weight, cold s tar t,
roading fenders, Product Link™, manual dif f lock /open axles (front /rear),
Hydraulic System
power train guard, secondar y steering, sound suppression and a 3 . 3 m 3 Implement Pump Type Variable A xial Pis ton
(4. 3 yd3) general purpose bucket with BOCE. Implement System:
Maximum Pump Output (2 ,15 0 rpm) 2 8 6 L /min 76 gal/min
Maximum Operating Pressure 2 9 3 0 0 kPa 4, 2 5 0 psi
Bucket Capacities
Hydraulic Cycle Time – Total 8.9 Seconds
Bucket Range 2 .5 -9.2 m³ 3. 3 -12.0 yd³

Transmission Dimensions
Standard Lif t High Lift
For ward 1 6.9 km/h 4 .3 mph For ward 5 3 9.5 km/h 24.5 mph
Height to Top of Hood 2 69 4 mm 8'10 " 2 691 mm 8'10 "
For ward 2 12 km/h 7.5 mph Reverse 1 6.9 km/h 4 .3 mph
Height to Top of E xhaust Pipe 3 411 mm 11'2 " 3 4 0 8 mm 11'2 "
For ward 3 19.3 km / h 12.0 mph Reverse 2 12 km/h 7.5 mph
Height to Top of ROPS 3 4 47 mm 11'4" 3 4 4 4 mm 11'4"
For ward 4 2 5.7 km /h 16.0 mph Reverse 3 2 5.7 km/h 16.0 mph
Ground Clearance 3 6 4 mm 1'2 " 3 61 mm 1'2 "
• Maximum travel speed in standard vehicle with empt y bucket and
standard L 3 tires with 787 mm (31 in) roll radius. Center Line of Rear A xle to Edge
2147 mm 7'1" 2147 mm 7'1"
of Counter weight
Center Line of Rear A xle to Hitch 1675 mm 5'6 " 1675 mm 5'6"
Sound Wheelbase 3 3 5 0 mm 11'0 " 3 3 5 0 mm 11'0 "
With Cooling Fan Speed at Maximum Value: Overall Length (without bucket) 72 2 8 mm 2 3'9 " 72 2 8 mm 2 3'9 "
Operator Sound Pressure Level (ISO 6 3 9 6:2 0 0 8) 70 dB(A) Hinge Pin Height at Carr y Height 6 69 mm 2'2" 779 mm 2'7 "
E x terior Sound Power Level (ISO 6 3 95:2 0 0 8) 10 7 dB(A) Hinge Pin Height at Maximum Lif t 42 3 5 mm 13'11" 4 524 mm 14'10 "
E x terior Sound Pressure Level (SAE J8 8:2 013) 75 dB(A)* Lif t Arm Clearance at Maximum Lif t 3 47 7 mm 11'4" 3 6 31 mm 11'10 "
*Distance of 15 m (4 9.2 f t), moving for ward in second gear ratio. Rack Back at Maximum Lif t 5 9 degrees 5 9 degrees
With Cooling Fan Speed at 70% of Maximum Value* * Rack Back at Carr y Height 4 9 degrees 4 9 degrees
Operator Sound Pressure Level (ISO 6 3 9 6:2 0 0 8) 69 dB(A) Rack Back at Ground 3 7 degrees 3 7 degrees
E x terior Sound Power Level (ISO 6 3 95:2 0 0 8) 10 4 L WA*** Maximum W idth over Tires (loaded) 2 824 mm 9'3 " 2 824 mm 9'3 "
* *For machines in European Union countries and in countries that adopt Tread W idth 214 0 mm 7'0 " 214 0 mm 7'0 "
the “EU Directives.”
• All dimensions are approximate and based on Michelin 2 3.5R25 XHA 2 L 3
* * *European Union Directive “2 0 0 0/14 / EC” as amended by “2 0 05 / 8 8 / EC.” radial tires.

F or more complete infor mation on Cat product s, dealer ser v ices, and indus tr y solu tions, visit us on t he web at ww w.cat.com AE XQ1956-02
© 2 017 Caterpillar Replaces AE XQ195 6-01
All righ ts reser ved (N A m, Eur)
Materials and speci fications are subject to change wi thout notice. Featured machines in pho t os may include addit ional equipment .
See your Cat dealer for available options.

C AT, CAT E RPIL L A R , S A F E T Y.C AT.COM, t heir respec t ive logos, “Caterpillar Yellow ” and the “Power Edge” trade dress, as well as
corporate and product iden ti t y used herein, are t rademarks of Caterpillar and may no t be used wi thout permission.

V isionL ink is a trademark of Trimble Navigation L imited, regis tered in the Uni ted S tates and in ot her countries.