Scribd Logo
Upload

Welcome to Scribd!

  • 14 views

    Checking Design With Basic Model

    Uploaded by

    selvakumar s
    The document discusses analysis of reinforced concrete structures. It lists Indian standards related to concrete, steel, earthquakes and cranes. It then discusses using software to analyze the structure by modeling it with frame and shell elements and checking it under various load combinations and limit states.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Checking Design With Basic Model

    Uploaded by

    selvakumar s
    14 views2 pages
    The document discusses analysis of reinforced concrete structures. It lists Indian standards related to concrete, steel, earthquakes and cranes. It then discusses using software to analyze the structure by modeling it with frame and shell elements and checking it under various load combinations and limit states.

    Original Title

    CHECKING DESIGN WITH BASIC MODEL

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses analysis of reinforced concrete structures. It lists Indian standards related to concrete, steel, earthquakes and cranes. It then discusses using software to analyze the structure by modeling it with frame and shell elements and checking it under various load combinations and limit states.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    14 views2 pages

    Checking Design With Basic Model

    Uploaded by

    selvakumar s
    The document discusses analysis of reinforced concrete structures. It lists Indian standards related to concrete, steel, earthquakes and cranes. It then discusses using software to analyze the structure by modeling it with frame and shell elements and checking it under various load combinations and limit states.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    8.

    IS-13920 – 1993 Ductile detailing of reinforced concrete


    structures subjected to seismic forces – code of
    practice
    9. IS-2062 – 1999 Steel for General Structural Purposes.
    Specification.
    10. IS-800 – 1984 Code of practice for General Construction in
    Steel.(WSM)
    IS-800 – 2007 Code of practice for General Construction in
    Steel.(LSM)
    11. IS- 1893 -2002 Criteria for Earthquake resistant design of
    structures.
    12. IS-807 – 2006 Design ,manufacture, erection,testing of crane

    15 | P a g e
    and hoist
    13. IS- 3177 -1999 Overhead travelling crane and gantry other than
    steel work
    14. IS- 4137 -1985 Heavy duty electric overhead crane including
    special service machine
    15. IS- 8112 -1989 43 grade opc specification
    16. IS- 12269 -1999 53 grade opc specification
    17 IS 3443- 1980 Specification for crane rail section

    9.0 ANALYSIS OF THE STRUCTURE

    10.1 The analysis is based on Stiffness matrix method and is done using the engineering software
    STAAD Pro. This is a tried and tested 3D Structural analysis tool, which includes analysis of plane
    frames, space frames using truss, beam and plate / shell elements.
    10.2 Generally, all the structures are idealized as 3D-frames, using beam element for column, beams etc
    and plate/shell element for slabs and shear wall, if necessary.
    10.3 The structures are assumed to respond elastically to all the working loads. The deflections of
    structures will be sufficiently small and as such justify use of normally adopted methods of linear
    response.
    10.4 The structures shall be analyzed for individual load cases as described in 7.6.1 above, using state
    of the art software packages (STAAD etc) as required. Suitable load combinations shall be performed and
    the performance of the structures in various states of collapse and serviceability is checked accordingly.
    10.5 The entire superstructure is modeled using frame and shell elements as appropriate. Beams and
    columns are modeled as frame elements while RC walls are modeled as shell elements.
    10.6 Structures with slabs acting as horizontal diaphragms are analyzed as space frames and structures
    without slabs are analyzed as plane frames.
    10.7 Building with steel structures are analyzed as plane frame and R. C. C. structures are analyzed as
    space frame.

    16 | P a g e

    You might also like