0% found this document useful (0 votes)

903 views

Oracle Database Tips

This document provides tips for tuning the DB_BLOCK_BUFFERS parameter and finding the physical read hit ratio. It also describes how to determine how many additional buffers may be needed if the hit ratio is low, including using views like X$KCBCDH. The document notes that the NLS_LANG parameter can affect character set conversions during exports. It also explains how to check if a query is executing or rolling back using the V$TRANSACTION view.

Uploaded by

api-3831209

Available Formats

Download as DOC, PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

903 views

Oracle Database Tips

Uploaded by

api-3831209

Available Formats

Download as DOC, PDF, TXT or read online on Scribd

You are on page 1/ 97

Oracle database tips

Summary: DB_BLOCK_BUFFERS size tuning.

Find Memory/Physical read Hit ratio.

Select decode(name, 'physical reads', value)/

(decode(name, 'consistent gets',value) *
decode(name,'db block gets',value)) as hit_ratio
From v$sysstat
where name IN ('physical reads', 'consistent gets', 'db block gets');

if ratio > 95 you may decrease the buffer size in case required for other purpose
if hit_ratio between 70 and 94 then its OK
if hit_ratio 60 to 69 then one has to add more buffers
==================
suppose it is less than 70, then question arises as to how many buffers to add. In order to determ
only on SYS login and DB_BLOCK_LRU_EXTENDED_STATISTICS set to non-zero value in
Description:
Select 100*TRUNC(indx/100) + 1 || '-' || 100*(TRUNC(indx/100)+1 range,
SUM(count) additional_hits
FROM x$KCBRBH
GROUP BY TRUNC(indx/100);

suppose the result

range additional_hits
=========================
1-100 78002
101-200 105000
201-300 1005

in this case if you notice increasing the buffer size by 200 is sufficient, further increases will no
decrease, then perform above operation with X$KCBCDH view. For this, the init.ora prameter t
to true
Summary: How to find v
Ever spend so
values you ca
easily find th
Description: table. This tab
"TERRITOR
considered va
(Also shows
Summary: NLS_LANG parameter c
Description: While running an export o
character set of WE8ISO8
a warning message saying
possible character conver
NLS_LANG parm to Eng
the export worked proper
mind when running expor
something other than the
you could find that specia
mysteriously disappear fr
running the export will ne
NLS_LANG=English_Ca
NLS_LANG
Summary: "Query is executing..."?
Description: "Query is executing..." isn't
it? Who knows? This does, if
your query uses rollback
segments (updates, inserts,
etc.) Using the statement
below, you can find out if
your UPDATE (or whatever)
is proceeding or rolling back.

Step 1: Obtain the SID for

the session in question. There
are a few ways to obtain the
(proper) SID, but this may
work as well as any:
select sid, serial#, username,
terminal from v$session;
Look through the results to
find the SID you need. In this
example, the SID is 10.

Step 2: select taddr

from v$session
where sid = '10' ; In
this example, the result is
023ED71C

Step 3: Using the value of

taddr returned in step 2, do
this:
select used_ublk
from v$transaction
where
addr='023ED71C'
or, you can combine
steps 2 and 3 as
follows:
select used_ublk
from v$transaction
where addr=
(select TADDR from
v$session where
sid='10');

Step 4: Wait a few seconds,

and run STEP 3 again. if the
results show an increasing
number, the transaction is
proceeding. If the results
show a smaller number, then
a rollback is occurring.

Migrating
Summary: using
ODMA
Description: I'm
migrating
more than
242 oracle
7.3.4
databases to
Oracle 8.1.6
Using
ODMA
(Oracle Data
Migration
Asistant)
could find a
big error in
the Oracle
Note
76460.1
from
Metalink
(Checklist
for
Migrating
from
Oracle7 to
Oracle8.1 on
UNIX).
Step 13,
when you
have to
CONVERT
the database,
does not
work as
indicated,
so, what you
have to do
is:
1) startup
your db
2) backup
your control
file to trace
3) shutdown
your db
4) startup
nomount
5) recreate
your control
files using
script
generated in
step 2).
6) alter
database
open
7) continue
with Oracle
Checklist.
Believe me,
it works fine
!!! Hope this
could be
useful.
Email me if
any problem
comes up.
Summary: Migrating using ODMA
Description: I'm migrating more than 242 oracle 7.3.4
databases to Oracle 8.1.6
Using ODMA (Oracle Data Migration Asistant)
could find a big error in the Oracle Note 76460.1
from Metalink (Checklist for Migrating from
Oracle7 to Oracle8.1 on UNIX).
Step 13, when you have to CONVERT the
database, does not work as indicated, so, what you
have to do is:
1) startup your db
2) backup your control file to trace
3) shutdown your db
4) startup nomount
5) recreate your control files using script
generated in step 2).
6) alter database open
7) continue with Oracle Checklist.
Believe me, it works fine !!! Hope this could be
useful. Email me if any problem comes up.
Summary: Running SQLPLUS in NT scripts
Be aware, you can't setup an environment
variable SQLPLUS in an NT script. It will fail.
Oracle 8.1.6 has changed from plus80.exe to
sqlplus.exe. If you have an environment variable
set, i.e.
Description:
SQLPLUS=d:\oracle\ora81\bin\sqlplus.exe, the
batch job will fail.
Change the environment variable to anything
else other than SQLPLUS. i.e. set
SPLUS=d:\oracle\ora81\bin\sqlplus.exe
Summary: How to cleanup unused temporary segments
To cleanup or remove unused temporary
segments you can use the following SQL
statement on the temporary tablespace:

alter tablespace default storage

Description: (pctincrease )

use the pctincrease value you've already

specified for this tablespace. This SQL "wakes
up" the system monitor process, which removes
all unused temp. segments

How to load data from MS excel to an Oracle

Summary:
table?
Description: If your Excel sheet has a simple table format
then you can copy it as text file with tab
delimiters. Then create a simple ctl-file from
SQL*Loader just like that:

load data
infile ""
append
into table
fields terminated by ' ' (
)

The key is that in apostrophes you should

specify the tab character (ASCII code 9). Use
one of the text editors that support quoting
(usually with Ctrl+q combination keystroke).
After that you can issue:

sqlldr80 userid= control= log=

data=

That's all.
Some clarification.
Better use clause "...fields terminated by
X'09'..." in order to specify the tab character
explicitly.
You can also try saving the file from Excel in
text file CSV-format or TAB-delimited and
load with the SQL*Loader (Oracle Utilities) or
Borland DataPump (from Delphi or C++
distribut).

How do I restrict a query by "ROWNUM"

Summary:
range?
Description: If you try to use rownum to restrict a query by
a range that does not start with 1, you will
quickly find that it does not work. For
example:

SQL> SELECT * from TABLE1 WHERE

rownum BETWEEN 5 AND 10
no rows selected

The reason for this, is that rownum is a

pseudo-column produced AFTER the query
returns. Normally, it can only be used to
restrict a query to return a rownumber range
that starts with 1 (like rownum)

<5). However, there is a way to achieve this

using "in-line views".
For this complete tip, visit:
http://www.arrowsent.com/oratip/tip41.htm

For more of Ken's Oracle tips, visit his main

site at:
http://www.arrowsent.com/oratip/frames.htm

Tip #15: SQL scripts that compare schemas in two different instances for
differences. (Type: SQL)

So you have your application installed in three different instances (Development, Test,
Production). Or maybe that is six (conversion, demo, training), or eight? Well, how do
you keep all of that in sync? No matter how good your migration procedures, differences
between the instances somehow seem to always creep in. (How is it that something gets
into production, that has never been in development?)

This tip is a couple of SQL scripts that will use database links and the SQL MINUS
operator to compare the objects and table definitions in the same schema in two different
instances.

First, an example of using the two scripts will be shown, then the actual scripts
themselves. They can also be downloaded below.

The first script lists the objects that are not in both of the selected instances:

SQL> select db_link from user_db_links;

DB_LINK
------------------------------------
TESTLINK.WORLD

SQL> @objdiff
Object Owner: SHARED
First instance DB Link (Include @):
Second instance DB Link (Include @):@TESTLINK

OBJDIFF OBJECT DIFFERENCE REPORT Report

Date: 02/10/97

Page: 1
OWNER: SHARED
Objects in devl but not demo
Object Name Object Type Status
----------------------------------- ---------------
----------
TSU_SELECT_CAD_FN FUNCTION VALID
TSU_SELECT_FN FUNCTION VALID
FMU_PLS INDEX VALID
FMU_PRECIP INDEX VALID
SYSPIPE PACKAGE VALID
SYSPIPE PACKAGE BODY VALID
ABLE_FK_CONSTRAINTS PROCEDURE INVALID
WTRSHD_SEQ SEQUENCE VALID
ADMIN_CODE TABLE VALID
FMPT_FORM_HELP TABLE VALID
FMU_COUNTY_V VIEW VALID
FMU_TRUST_V VIEW VALID

12 rows selected.

OBJDIFF OBJECT DIFFERENCE REPORT Report

Date: 02/10/97

Page: 1
OWNER: SHARED
Objects in demo but not devl

Object Name Object Type Status

----------------------------------- ---------------
----------
PPR_LABEL_NM FUNCTION VALID
FMA_PEST_PEST_CD_I INDEX VALID
GEO_ADMIN_UNIT_SEQ SEQUENCE VALID
TR_FMA_STATUS TRIGGER INVALID
TR_INSERT_FMA_AREA TRIGGER INVALID
FMA_INS_FMA_AREA_TR TRIGGER VALID
RX_SUM_RPT_VIEW VIEW VALID

7 rows selected.
Notes: If no database link is entered, then the script uses the CURRENT instance. Also,
the title uses the instance name in each instances v$parameter table (Objects in
{instance_1_name} but not in {instance_2_name}.

The second script compares the actual table definitions in two instances:
SQL> @tabdiff
Table Owner: SHARED
First instance DB Link (Include @):
Second instance DB Link (Include @):@TESTLINK

TABDIFF SCHEMA DIFFERENCE REPORT Report

Date: 02/10/97

Page: 1
OWNER: SHARED
Differences between
devl and demo
Instance Table Column
DataType Len Pr Null?
-------- -------------------------
------------------------- -------- ---- ---- -----
demo FMU FMU_RESTR_BEG_DT_BAD
DATE 7 =0 Y
demo FMU FMU_RESTR_END_DT_BAD
DATE 7 =0 Y

2 rows selected.
And now listings of the actual scripts:
/**********************************************************
***************/
/* objdiff.sql - Lists the objects in a schema that are not
in both of */
/* two instances. Uses database links and
the SQL MINUS */
/* operator to make the comparison.
*/
/*
*/
/* Author: Ken Atkins ([email protected])
*/
/* http://www.arrowsent.com/oratip
*/
/*
*/
/* Written: 5/11/95
*/
/*
*/
/* You need to have a database link setup for any instance
that you want */
/* to make a comparison for.
*/
/*
*/
/* Please feel free to use and modify this script as long
it is not sold */
/* or included in any software without the prior permission
of the author*/
/* If you do make some good improvements, please send them
to me, and I */
/* can incorporate them in a future version and make them
available to */
/* others (giving you credit of course!).
*/
/*
*/
/**********************************************************
***************/
set pagesize 60
set linesize 80
set verify off
set feedback off
set pause off;
--define obj_owner = '&1'
--define inst_1 = '&2'
--define inst_2 = '&3'
accept obj_owner prompt 'Object Owner: '
accept inst_1 prompt 'First instance DB Link (Include @):'
accept inst_2 prompt 'Second instance DB Link (Include @):'

clear breaks
ttitle off
set heading off

column datetime noprint new_value datetime

column inst_code1 noprint new_value inst_code1
column inst_code2 noprint new_value inst_code2

select to_char(sysdate,'MM/DD/YY') datetime

ttitle left 'OBJDIFF'-

col 25 'OBJECT DIFFERENCE REPORT' -
col 53 'Report Date: ' datetime -
skip 1 col 60 'Page: ' sql.pno -
skip 1 col 10 'OWNER: ' obj_owner -
skip 1 center 'Objects in &inst_code1 but not &inst_code2'
-
skip 2

set null=0

column object_type format a15 heading 'Object Type';

column object_name format a35 heading 'Object Name';
column status format a10 heading 'Status';
column inst_code format a10 heading 'Instance';
select object_name, object_type, status
from all_objects&inst_1
where owner = UPPER('&obj_owner')
-- and object_type != 'SYNONYM'
MINUS
select object_name, object_type, status
from all_objects&inst_2
where owner = UPPER('&obj_owner')
-- and object_type != 'SYNONYM'
order by 2,3
/
set heading off;
set feedback off;
select '
' from dual
/
set heading on;
set feedback on;
ttitle left 'OBJDIFF'-
col 25 'OBJECT DIFFERENCE REPORT' -
col 53 'Report Date: ' datetime -
skip 1 col 60 'Page: ' sql.pno -
skip 1 col 10 'OWNER: ' obj_owner -
skip 1 center 'Objects in &inst_code2 but not &inst_code1'
-
skip 2

select object_name, object_type, status

from all_objects&inst_2
where owner = UPPER('&obj_owner')
and object_type != 'SYNONYM'
MINUS
select object_name, object_type, status
from all_objects&inst_1
where owner = UPPER('&obj_owner')
and object_type != 'SYNONYM'
order by 2,3
/
undefine datetime
undefine inst_code1
undefine inst_code2
undefine obj_owner
===============================================================
=
/**********************************************************
***************/
/* tabdiff.sql - Lists the differences in table definitions
in the tables*/
/* for a schema in two different instances.
Uses database*/
/* links and the SQL MINUS operator to make
the comparison.*/
/*
*/
/* Author: Ken Atkins ([email protected])
*/
/* http://www.arrowsent.com/oratip
*/
/*
*/
/* Written: 5/11/95
*/
/*
*/
/* You need to have a database link setup for any instance
that you want */
/* to make a comparison for.
*/
/*
*/
/* Please feel free to use and modify this script as long
it is not sold */
/* or included in any software without the prior permission
of the author*/
/* If you do make some good improvements, please send them
to me, and I */
/* can incorporate them in a future version and make them
available to */
/* others (giving you credit of course!).
*/
/*
*/
/**********************************************************
***************/
set pagesize 60
set linesize 105
set verify off
set feedback off
set pause off;

--define obj_owner = '&1'

--define inst_1 = '&2'
--define inst_2 = '&3'
accept obj_owner prompt 'Table Owner: '
accept inst_1 prompt 'First instance DB Link (Include @):'
accept inst_2 prompt 'Second instance DB Link (Include @):'

clear breaks
ttitle off
set heading off

column datetime noprint new_value datetime

column inst_code1 noprint new_value inst_code1
column inst_code2 noprint new_value inst_code2

select to_char(sysdate,'MM/DD/YY') datetime

from dual
/
select value inst_code1
from v$parameter&inst_1
where name = 'db_name'
/
select value inst_code2
from v$parameter&inst_2
where name = 'db_name'
/
set feedback on
set heading on
set newpage 0
ttitle left 'TABDIFF'-
col 25 'SCHEMA DIFFERENCE REPORT' -
col 53 'Report Date: ' datetime -
skip 1 col 60 'Page: ' sql.pno -
skip 1 col 10 'OWNER: ' obj_owner -
skip 1 center 'Differences between &inst_code1 and
&inst_code2' -
skip 2

column table_name format a25 heading 'Table';

column column_name format a25 heading 'Column';
column data_type format a8 heading 'DataType';
column data_length format 999 heading 'Len';
column data_precision format 999 heading 'Pr';
column nullable format a5 heading 'Null?';
column inst_code format a8 heading 'Instance';
(
select '&inst_code1' inst_code, table_name, column_name,
data_type, data_length, data_precision, nullable
from all_tab_columns&inst_1
where owner = UPPER('&obj_owner')
and table_name in (select table_name from
all_tables&inst_2
where owner = UPPER('&obj_owner'))
MINUS
select '&inst_code1' inst_code, table_name, column_name,
data_type, data_length, data_precision, nullable
from all_tab_columns&inst_2
where owner = UPPER('&obj_owner')
)
UNION
(
select '&inst_code2' inst_code, table_name, column_name,
data_type,
data_length, data_precision, nullable
from all_tab_columns&inst_2
where owner = UPPER('&obj_owner')
and table_name in (select table_name from
all_tables&inst_1
where owner = UPPER('&obj_owner'))
MINUS
select '&inst_code2' inst_code, table_name, column_name,
data_type,
data_length, data_precision, nullable
from all_tab_columns&inst_1
where owner = UPPER('&obj_owner')
)
order by 2, 3
/
undefine datetime
undefine inst_code1
undefine inst_code2
undefine obj_owner

Tip #12: SQL Script to show 'hit ratio' of currently running processes.
(Type: SQL)

Have you ever wondered why your server was running so slow? Who else is running
queries and why are they bogging the system down?? So you go round up a DBA and ask
them to monitor the database using one of those shnazzy DBA type tools. But DBAs are
not always had for the asking, and you do not have access to the tools, so what do you
do? This tip is a couple of simple SQL scripts which will show which Oracle processes
are currently running in an instance, and what the buffer hit ratio is for those processes
(low hit ratios are an indication of poorly tuned SQL, which can slow the WHOLE
instance down).

The first script shows the active processes and their current hit ratio.

/**********************************************************
***************/
/* listproc.sql - Lists currently running processes and
their hit ratios */
/*
*/
/* Author: Ken Atkins ([email protected])
*/
/* http://www.arrowsent.com/oratip
*/
/*
*/
/* You need select access to V$SESSION, V$PROCESS, and
V$SESS_IO */
/* to run this script.
*/
/*
*/
/* The columns returned by this script are:
*/
/ Oracle ID (schemaname) = The oracle 'schema' or
'user' that is */
/* running the SQL statement.
*/
/* System ID (username) = The system id that the
process is */
/* running under. Will be
the unix userid */
/* if Oracle running on unix.
*/
/* Program = The name of the program that is
running the SQL.*/
/* Physical Reads = The number of physical block
reads. */
/* Hit Ratio = The ratio of buffer to physical
block reads. */
/* be an indication of the
efficiency of the query*/
/* running. Anything under 90% is
bad. Very low */
/* hit ratios (< 10-20%) in a
process can slow */
/* down the whole system.
*/
/**********************************************************
***************/
column schemaname format a10 heading 'Oracle ID'
column username format a10 heading 'System ID'
column program format a32 heading 'Program'
column hit_ratio format 9.90 heading 'Hit Ratio'
column physical_reads format 9999999 heading 'Reads'
column sid format 99999
SELECT s.schemaname
, p.username
, s.program
,io.physical_reads
,(io.block_gets+io.consistent_gets)/
(io.block_gets+io.consistent_gets+io.physical_reads
) hit_ratio
FROM V$Session s
,V$Process p
,V$Sess_io io
WHERE s.paddr = p.addr
AND s.sid = io.sid
-- Only look at active processes
AND s.status = 'ACTIVE'
-- Need this predicate to prevent division by 0
AND (io.block_gets+io.consistent_gets+io.physical_reads)
> 0
/
An example of using the script:
SQL> @hitratio

Oracle ID System ID Program

Reads Hit Ratio
---------- ---------- --------------------------------
-------- ---------
SYS oracle7
1.00
SYS oracle7
10894 .83
SYS oracle7
18 .95
BDES490 oracle7 C:\ORAWIN\BIN\PLUS31.EXE
1.00
BDES490 oracle7 sqlplus@larabee (TNS interface)
3478 .83

The next script is a simpler version that just shows all of processes and their status, sid
and serial#. The sid and serial# are used in the ALTER SYSTEM KILL SESSION
command to kill oracle processes that are 'stuck'.

/**********************************************************
***************/
/* listproc.sql - Lists currently processes, status, sid &
serial# */
/*
*/
/* Author: Ken Atkins ([email protected])
*/
/* http://www.arrowsent.com/oratip
*/
/*
*/
/* You need select access to V$SESSION, V$PROCESS to run
this script */
/*
*/
/**********************************************************
***************/
column schemaname format a10 heading 'Oracle ID'
column username format a10 heading 'System ID'
column program format a30 heading 'Program'
column user_name format a15 heading 'User Name'
column sid format 99999
SELECT s.schemaname
,p.username
,s.program
,s.sid
,s.serial#
,s.status
FROM V$Session s
,V$Process p
where s.paddr = p.addr
/
An example of running the script:
SQL> @listproc

Oracle ID System ID Program SID

SERIAL# STATUS
---------- ---------- ------------------------------ ------
--------- --------
KATK490 C:\WINDOWS\SYSTEM32\OLE2.DLL 21
447 KILLED
SYS oracle7 1
1 ACTIVE
SYS oracle7 2
1 ACTIVE
SYS oracle7 3
1 ACTIVE
SYS oracle7 4
1 ACTIVE
SYS oracle7 5
1 ACTIVE
ORAPIPE orapipe ? @gamera (TNS interface) 9
8021 INACTIVE
BDES490 oracle7 C:\ORAWIN\BIN\CKRON10L.DLL 12
105 INACTIVE
JOJJ490 oracle7 C:\ORAWIN\BIN\R25DES.EXE 7
32691 INACTIVE
BDES490 oracle7 C:\ORAWIN\BIN\PLUS31.EXE 16
275 ACTIVE
ARJJ490 oracle7 C:\ORAWIN\BIN\CKRON10L.DLL 6
2029 INACTIVE
BHAR490 oracle7 C:\ORAWIN\BIN\PLUS31.EXE 10
2545 INACTIVE
BDES490 oracle7 sqlplus@larabee (TNS interface) 17
619 ACTIVE
MAJJ490 oracle7 C:\ORAWIN\BIN\CKRON10L.DLL 13
35 INACTIVE
BHAR490 oracle7 C:\ORAWIN\BIN\R25DES.EXE 14
39 INACTIVE
ARJJ490 oracle7 C:\ORAWIN\BIN\R25DES.EXE 8
9173 INACTIVE
MAJJ490 oracle7 C:\ORAWIN\BIN\R25DES.EXE 11
2273 INACTIVE
SHARED oracle7 C:\ORAWIN\BIN\PLUS31.EXE 15
67 INACTIVE
BDES490 oracle7 C:\ORAWIN\BIN\PLUS31.EXE 18
739 INACTIVE

Tip #11: Procedure to disable FK constraints TO a table. (Type: DBA)

So you have to reload the data in a table that is maintained in another system. But there
are these pesky Foreign Keys defined TO this table from other tables in your database.
Oh Well, Select the names of the FKs from the constraints table, enter the commands to
disable them, now load the data. What? You missed one? Disable it, reload. Now enable
all of the constraints again. Kind of tedious. This tip details a stored procedure that can
automatically disable or enable all of the FK constraints *TO* a specified table.

The following procedure uses the following steps to enable or disable all of the FK
constraints *TO* a specified table:

1. Finds the PK of the specified table.

2. Uses this PK to find all of the FKs that are linked to the PK.
3. Puts together an ALTER TABLE DISABLE CONSTRAINT command to disable
each FK.
4. Uses dynamic SQL to execute the commands.

PROMPT
PROMPT Creating Procedure able_fk_constraints
CREATE OR REPLACE PROCEDURE able_fk_constraints(
pTable IN VARCHAR2 ,
pAble IN VARCHAR2 )
IS
vPKName VARCHAR2(80);

-- This cursor returns the list of FK constraints linked to

the specified
-- PK constraint.
CURSOR curFK(pcPKName IN VARCHAR2) IS
SELECT constraint_name, table_name
FROM user_constraints
WHERE r_constraint_name = pcPKName;
-- These two variables are used for the dynamic SQL
nDDLCursor INTEGER;
nDDLReturn INTEGER;
BEGIN
/**********************************************************
*********************/
/* ABLE_FK_CONSTRAINTS - This procedure easily
enables/disables FK constraints */
/* pointing TO the specified table.
*/
/*
*/
/* Parameters: pTable - The name of the table to
dis/enable FK */
/* constraints to.
*/
/* pAble - One of: DISABLE or ENABLE
*/
/**********************************************************
*********************/

-- Get the name of the PK constraint for the specified

table.
BEGIN
SELECT constraint_name INTO vPKName
FROM user_constraints
WHERE table_name = pTable
AND constraint_type = 'P';
END;

-- Now get the FK constraints linked to the PK constraint

of the specified table.
FOR fk IN curFK(vPKName) LOOP

-- Use dynamic SQL to execute the ALTER TABLE command

and dis/enable the constraint
nDDLCursor := dbms_sql.open_cursor;
dbms_sql.parse(nDDLCursor,'ALTER TABLE '||
fk.table_name||' '
||pAble||' CONSTRAINT '||
fk.constraint_name, 1);
nDDLReturn := dbms_sql.execute(nDDLCursor);
dbms_sql.close_cursor(nDDLCursor);
END LOOP;
END ABLE_FK_CONSTRAINTS;
/
An example of using the script:
execute able_fk_constraints('MYTABLE','DISABLE');
truncate table mytable;
@load_mytable
execute able_fk_constraints('MYTABLE','ENABLE');
Of course, the procedure has to be installed in a schema
that has the ALTER TABLE system privelege, and
security to modify the specified table. Also, the data that
is loaded into the table may cause an existing FK
contraint to no longer be valid (like if an expected code
is no longer there). In this case, the ENABLE will bomb,
and the data will have to be fixed before the constraint
can be re-enabled. Tip #52: Getting Rid of "Input
truncated to # characters" (Type: SQL*Plus)
Are you getting the annoying message "Input truncated to # characters" whenever you
run a SQL script in SQL*Plus? This can be very annoying, especially if you are running
SQL scripts that produce reports or generate other SQL scripts. This tip will tell you how
to get rid of this message!

An Example of the Problem

Consider the following SQL*Plus report:

set pagesize 30
set linesize 40
set feedback off
ttitle CENTER 'Test Employee Report' skip 2
break on dname skip 1
spool tstrep.lst
SELECT d.dname, e.empno, e.ename
FROM Dept d, Emp e
WHERE d.deptno = e.deptno
ORDER BY d.dname, e.ename
/
spool off

If executed you might see:

Test Employee Report

DNAME EMPNO ENAME

-------------- ---------- ----------
ACCOUNTING 7782 CLARK
7839 KING
7934 MILLER

RESEARCH 7876 ADAMS

7902 FORD
7566 JONES
7788 SCOTT
7369 SMITH

SALES 7499 ALLEN

7698 BLAKE
7900 JAMES
7654 MARTIN
7844 TURNER
7521 WARD

Input truncated to 9 characters Problem Message!

As you can see, you have the unwanted message at the bottom of the report.

What Causes The Problem?

This problem is caused by having anything OTHER than a blank line at the bottom of
your SQL*Plus script! The last line of the script *must* be a blank line, that is a line
with a carriage return and NOTHING ELSE. For example:

Blank Line!

Tip #44: Ordering by a Hierarchy (Type: SQL)

Have you ever tried to order a hierarchical query? The results are not encouraging. The
ordering returned by Oracle is based on the hierarchy, and there is no easy way to order
WITHIN the hierarchy levels. So how do we get around this problem? Well, there is no
easy way to do it. However, with a little work, the solution presented in this tip will do it.
What Happens if I Order by

I will use the infamous EMP/DEPT tables to illustrate this technique. Using these tables,
you might use the following SQL for a standard hierarchical query:
SQL>
1 SELECT level, LPAD(' ',2*level-2)||emp.ename ename,
emp.empno, emp.mgr, emp.deptno
2 FROM Emp
3 CONNECT BY PRIOR emp.empno = emp.mgr
4* START WITH emp.empno = 7839
SQL> /

LEVEL ENAME EMPNO MGR DEPTNO

--------- -------------------- --------- --------- ---------
1 KING 7839 10
2 JONES 7566 7839 20
3 SCOTT 7788 7566 20
4 ADAMS 7876 7788 20
3 FORD 7902 7566 20
4 SMITH 7369 7902 20
2 BLAKE 7698 7839 30
3 ALLEN 7499 7698 30
3 WARD 7521 7698 30
3 MARTIN 7654 7698 30
3 TURNER 7844 7698 30
3 JAMES 7900 7698 30
2 CLARK 7782 7839 10
3 MILLER 7934 7782 10

Now let's say you want to order alphabetically within each level (i.e. BLAKE, CLARK,
JONES for level 2, and ALLEN, JAMES, MARTIN, TURNER, WARD for level 3 under
BLAKE). Here are some standard attempts at this:

SQL> l
1 SELECT level, LPAD(' ',2*level-2)||emp.ename ename,
emp.empno, emp.mgr, emp.deptno
2 FROM Emp
3 CONNECT BY PRIOR emp.empno = emp.mgr
4* START WITH emp.empno = 7839

LEVEL ENAME EMPNO MGR DEPTNO

--------- -------------------- --------- --------- ---------
4 ADAMS 7876 7788 20
4 SMITH 7369 7902 20
3 ALLEN 7499 7698 30
3 FORD 7902 7566 20
3 JAMES 7900 7698 30
3 MARTIN 7654 7698 30
3 MILLER 7934 7782 10
3 SCOTT 7788 7566 20
3 TURNER 7844 7698 30
3 WARD 7521 7698 30
2 BLAKE 7698 7839 30
2 CLARK 7782 7839 10
2 JONES 7566 7839 20
1 KING 7839 10

14 rows selected.

SQL> l
1 SELECT level, LPAD(' ',2*level-2)||emp.ename ename,
emp.empno, emp.mgr, emp.deptno
2 FROM Emp
3 CONNECT BY PRIOR emp.empno = emp.mgr
4 START WITH emp.empno = 7839
5* order by emp.ename
SQL> /

LEVEL ENAME EMPNO MGR DEPTNO

--------- -------------------- --------- --------- ---------
4 ADAMS 7876 7788 20
3 ALLEN 7499 7698 30
2 BLAKE 7698 7839 30
2 CLARK 7782 7839 10
3 FORD 7902 7566 20
3 JAMES 7900 7698 30
2 JONES 7566 7839 20
1 KING 7839 10
3 MARTIN 7654 7698 30
3 MILLER 7934 7782 10
3 SCOTT 7788 7566 20
4 SMITH 7369 7902 20
3 TURNER 7844 7698 30
3 WARD 7521 7698 30

14 rows selected.

LEVEL ENAME EMPNO MGR DEPTNO

--------- -------------------- --------- --------- ---------
1 KING 7839 10
2 BLAKE 7698 7839 30
2 CLARK 7782 7839 10
2 JONES 7566 7839 20
3 ALLEN 7499 7698 30
3 FORD 7902 7566 20
3 JAMES 7900 7698 30
3 MARTIN 7654 7698 30
3 MILLER 7934 7782 10
3 SCOTT 7788 7566 20
3 TURNER 7844 7698 30
3 WARD 7521 7698 30
4 ADAMS 7876 7788 20
4 SMITH 7369 7902 20

None of these give us what we want.

Use a Hierarchy Order Key

The only way I have found to truly resolve this problem is to add a hierarchy ordering
key column to the table with the hierarchy. This column needs to be populated
programmatically in such a way that you get the desired ordering. This key has to be the
concatenation of some sort of order key for EACH of the parent levels above the
hierarchy node. This will allow the hierarchy to be ordered within each level while
allowing the children to be placed directly underneath their parent. For example,
consider the EMP_HIER_ORDER column that I added to the standard emp table below:
EMPNO ENAME EMP_HIER_ORDER
--------- -------------------- -----------------------------
7369 SMITH 0008000700050012
7499 ALLEN 000800030002
7521 WARD 000800030014
7566 JONES 00080007
7654 MARTIN 000800030009
7698 BLAKE 00080003
7782 CLARK 00080004
7788 SCOTT 000800070011
7839 KING 0008
7844 TURNER 000800030013
7876 ADAMS 0008000700110001
7900 JAMES 000800030006
7902 FORD 000800070005
7934 MILLER 000800040010

Now if I order by EMP_HIER_ORDER I get:

SQL> l
1 SELECT level, LPAD(' ',2*level-2)||emp.ename ename,
emp.empno,
2 FROM Emp
3 CONNECT BY PRIOR emp.empno = emp.mgr
4 START WITH emp.empno = 7839
5 order by emp_hier_order
SQL> /

LEVEL ENAME EMPNO MGR EMP_HIER_ORDER

--------- -------------------- --------- ---------
-----------------
1 KING 7839 0008
2 BLAKE 7698 7839 00080003
3 ALLEN 7499 7698 000800030002
3 JAMES 7900 7698 000800030006
3 MARTIN 7654 7698 000800030009
3 TURNER 7844 7698 000800030013
3 WARD 7521 7698 000800030014
2 CLARK 7782 7839 00080004
3 MILLER 7934 7782 000800040010
2 JONES 7566 7839 00080007
3 FORD 7902 7566 000800070005
4 SMITH 7369 7902
0008000700050012
3 SCOTT 7788 7566 000800070011
4 ADAMS 7876 7788
0008000700110001

Which is exactly what I want. The first four characters of EMP_HIER_ORDER are used
for ordering the top level of the hierarchy ("0008"), the second four are used for ordering
the second level ("0003","0004","0007"), and the third four for the third level, etc.
NOTE: The above query used the hierarchical clauses (CONNECT BY, etc.) Using the
hierarchy ordering column you could construct a query that does not need it. For
instance:

SELECT length(emp_hier_order)/4 lvl, LPAD('

',(length(emp_hier_order)/2)-2)||emp.ename ename,
FROM Emp
order by emp_hier_order

Populating The Hierarchy Ordering Key

The main problem with this technique is that it requires that extra code be written and
executed to populate the hierarchy ordering key. I used the following stored procedure to
populate the EMP_HIER_ORDER key in the above example:

CREATE OR REPLACE PROCEDURE Update_Emp_Hier IS

-- Cursor to return the ordering key for emp

CURSOR emp_order_cur IS
SELECT empno
FROM Emp
ORDER BY ename;

-- Hierarchy query
CURSOR hier_cur IS
SELECT LEVEL lvl, empno
FROM Emp
START WITH emp.empno = 7839
CONNECT BY PRIOR emp.empno = emp.mgr;

TYPE vc_tabtype IS TABLE OF VARCHAR2(4) INDEX BY BINARY_INTEGER;

t_ordkey vc_tabtype;
t_key vc_tabtype;
v_hier_key VARCHAR2(30);
v_OrdCnt NUMBER := 0;
BEGIN
--
-- Load the ordering key into a PL/SQL table to save table
access
FOR e IN emp_order_cur LOOP
v_OrdCnt := v_OrdCnt + 1;
t_ordkey(e.empno) := LPAD(TO_CHAR(v_OrdCnt),4,'0');
END LOOP;

-- Now open the hierarchy query

FOR h IN hier_cur LOOP
-- Store the order key for the current level in the hierarchy
t_key(h.lvl) := t_ordkey(h.empno);

-- Build the full ordering key for the current record. This
will
-- consist of the current record's ordering key preceded in
order
-- by the ordering keys of every level above it in the
hierarchy.
v_hier_key := '';
FOR i IN 1..h.lvl LOOP
v_hier_key := v_hier_key||t_key(i);
END LOOP;

UPDATE Emp
SET emp_hier_order = v_hier_key
WHERE empno = h.empno;

END LOOP;
END;
/

This stored procedure can be called from the client that maintains the hierarchy, executed
either manually (i.e. when the user says they are done editing the hierarchy), or
automatically. But a better method would be to put a call to this procedure into a trigger
for the table. The following trigger definition would work:

CREATE OR REPLACE TRIGGER emphierorder

AFTER INSERT OR DELETE OR UPDATE OF mgr
ON Emp
BEGIN
update_emp_hier;
END;

This trigger would automatically maintain the hierarchy after any updates to the table
that would affect the hierarchy (i.e. updates to the MGR column).

Drawbacks to This Technique

Of course there are a few drawbacks to this technique:

1. You have to create and maintain a "denormalized" column.

2. You have to write and maintain the code that populates the column.
3. Since ANY update to the table causes ALL of the rows to be updated, there may
be some performance problems for large frequently updated hierarchies. (There
are ways to reduce this impact, but they are usually design specific, and out of the
scope of this tip).

Tip #42: A Single Hierarchy View for Multiple

Hierarchies (Type: SQL)
When you use hierarchical queries (queries using CONNECT BY and PRIOR), you
always have to specify the top of a particular hierarchy using the "START WITH"
syntax. This is often done by hard coding the PK of the top of the hierarchy in the
"START WITH" clause. However, if you have many hierarchies in the same table, you
might want to be able to have the same program use ANY of the hierarchies, and specify
which hierarchy (and thus, which "START WITH" key) at runtime. Wouldn't it be nice if
you could put the hierarchy query in a view, and simply specify the hierarchy to use at
runtime? Well, you can! This tip will show one technique for doing this.

Starting With A Standard Hierarchy Query

I will use the infamous EMP table to illustrate this technique. However, since the
standard emp table only has one hierarchy (starting with "KING"), I added a second
hierarchy. I also updated the DEPTNO for all of the standard records to have the same
DEPTNO (which I use to differentiate the two hierarchies). Using this tables, you might
use the following SQL for a standard hierarchical query:

SQL>
1 SELECT level, LPAD(' ',2*level-2)||emp.ename ename,
emp.empno, emp.mgr, emp.deptno
2 FROM Emp
3 CONNECT BY PRIOR emp.empno = emp.mgr
4* START WITH emp.empno = 7839
SQL> /

LEVEL ENAME EMPNO MGR DEPTNO

I placed a second hierarchy in the same table, this one starting with
"SONG":
SQL>
1 SELECT level, LPAD(' ',2*level-2)||emp.ename ename,
emp.empno, emp.mgr, emp.deptno
2 FROM Emp
3 CONNECT BY PRIOR emp.empno = emp.mgr
4* START WITH emp.empno = 6000
SQL> /

LEVEL ENAME EMPNO MGR DEPTNO

--------- -------------------- --------- --------- ---------
1 SONG 6000 40
2 GOMEZ 6001 6000 40
3 WILLIAMS 6002 6001 40
4 DIRKSEN 6003 6002 40
5 ATKINS 6004 6003 40
5 DESZELL 6005 6003 40
5 DEVITT 6006 6003 40
2 SMITH 6007 6000 40
3 GEORGE 6008 6007 40
3 JONES 6009 6007 40
4 MILLER 6010 6009 40
4 BAKER 6011 6009 40

Trying to Make The Query more Generic

Let's try leaving off the "START WITH" in a view in an attempt to make a generic
hierarchy view:
SQL> CREATE OR REPLACE VIEW Emp_Hier AS
2 SELECT level lvl, LPAD(' ',2*level-2)||emp.ename ename,
emp.empno, emp.mgr, emp.deptno
3 FROM Emp
4 CONNECT BY PRIOR emp.empno = emp.mgr
5 /
Now if we select from this view without any predicates, the query will still return, but it
will return the results of a hierarchy starting with EVERY record in the table. For
example:
SQL> SELECT lvl, ename, empno, mgr, deptno
2 FROM Emp_Hier
3 /
LEVEL ENAME EMPNO MGR DEPTNO
--------- -------------------- --------- --------- ---------
1 KING 7839 10
2 BLAKE 7698 7839 10
3 MARTIN 7654 7698 10
3 ALLEN 7499 7698 10
3 TURNER 7844 7698 10
3 JAMES 7900 7698 10
3 WARD 7521 7698 10
2 CLARK 7782 7839 10
3 MILLER 7934 7782 10
2 JONES 7566 7839 10
3 FORD 7902 7566 10
4 SMITH 7369 7902 10
5 Ken 999 7369 10
3 SCOTT 7788 7566 10
4 ADAMS 7876 7788 10
1 BLAKE 7698 7839 10
2 MARTIN 7654 7698 10
2 ALLEN 7499 7698 10
2 TURNER 7844 7698 10
2 JAMES 7900 7698 10
2 WARD 7521 7698 10
1 CLARK 7782 7839 10
2 MILLER 7934 7782 10
1 JONES 7566 7839 10
2 FORD 7902 7566 10
3 SMITH 7369 7902 10
4 Ken 999 7369 10
2 SCOTT 7788 7566 10
3 ADAMS 7876 7788 10
1 MARTIN 7654 7698 10
1 ALLEN 7499 7698 10
1 TURNER 7844 7698 10
1 JAMES 7900 7698 10
1 WARD 7521 7698 10
. . . . .
. . . . .
. . . . .
1 SONG 6000 40
2 GOMEZ 6001 6000 40
3 WILLIAMS 6002 6001 40
4 DIRKSEN 6003 6002 40
5 ATKINS 6004 6003 40
5 DESZELL 6005 6003 40
5 DEVITT 6006 6003 40
2 SMITH 6007 6000 40
3 GEORGE 6008 6007 40
3 JONES 6009 6007 40
4 MILLER 6010 6009 40
4 BAKER 6011 6009 40
1 GOMEZ 6001 6000 40
2 WILLIAMS 6002 6001 40
3 DIRKSEN 6003 6002 40
. . . . .
. . . . .
. . . . .
(NOTE: I did not display the complete results of this query)
Notice that the results start with the standard hierarchy (beginning with "KING"),
followed by another hierarchy starting with "BLAKE" (which is a child of "KING", and
should not have it's own hierarchy), followed by "CLARK", "JONES", etc. There are
even one level hierarchies for the records at the bottom of the tree (i.e. "MARTIN",
"ALLEN", etc.). Now this query is generic, and it will also pick up the 2nd complete
hierarchy (starting with "SONG"). You can use the DEPTNO column to select one or the
other of the hierarchies:
SQL> SELECT lvl, ename, empno, mgr, deptno
2 FROM Emp_Hier
3 WHERE deptno = 40
3 /

LEVEL ENAME EMPNO MGR DEPTNO

--------- -------------------- --------- --------- ---------

1 SONG 6000 40
2 GOMEZ 6001 6000 40
3 WILLIAMS 6002 6001 40
4 DIRKSEN 6003 6002 40
5 ATKINS 6004 6003 40
5 DESZELL 6005 6003 40
5 DEVITT 6006 6003 40
2 SMITH 6007 6000 40
3 GEORGE 6008 6007 40
3 JONES 6009 6007 40
4 MILLER 6010 6009 40
4 BAKER 6011 6009 40
1 GOMEZ 6001 6000 40
2 WILLIAMS 6002 6001 40
3 DIRKSEN 6003 6002 40
4 ATKINS 6004 6003 40
4 DESZELL 6005 6003 40
4 DEVITT 6006 6003 40
1 WILLIAMS 6002 6001 40
2 DIRKSEN 6003 6002 40
3 ATKINS 6004 6003 40
3 DESZELL 6005 6003 40
3 DEVITT 6006 6003 40
1 DIRKSEN 6003 6002 40
2 ATKINS 6004 6003 40
2 DESZELL 6005 6003 40
2 DEVITT 6006 6003 40
1 ATKINS 6004 6003 40
1 DESZELL 6005 6003 40
1 DEVITT 6006 6003 40
1 SMITH 6007 6000 40
2 GEORGE 6008 6007 40
2 JONES 6009 6007 40
3 MILLER 6010 6009 40
3 BAKER 6011 6009 40
1 GEORGE 6008 6007 40
1 JONES 6009 6007 40
2 MILLER 6010 6009 40
2 BAKER 6011 6009 40
1 MILLER 6010 6009 40
1 BAKER 6011 6009 40
This limits the query to one of the hierarchies, but it does not eliminate the spurious
hierarchies. Therefore, leaving off the START WITH predicate is fairly useless

Using a Database Function to Dynamically Determine the Top of the

Hierarchy

In order to add the "START WITH" back into the view, yet make the view dynamic, you
can create a database function that returns the top parent of a hierarchy given a key that
identifies the hierarchy (the deptno in this example). The following function does this for
our example:
CREATE OR REPLACE FUNCTION Get_Emp_Top(p_DeptNo IN NUMBER) RETURN
NUMBER IS
v_TopParent NUMBER;
BEGIN

SELECT empno INTO v_TopParent

FROM Emp
WHERE Deptno = p_Deptno
AND mgr IS NULL;

RETURN(v_TopParent);

END;
/
Now, we update the view, adding a START WITH clause that uses the function:
SQL> CREATE OR REPLACE VIEW Emp_Hier AS
2 SELECT level lvl, LPAD(' ',2*level-2)||emp.ename ename,
emp.empno, emp.mgr, emp.deptno
3 FROM Emp
4 CONNECT BY PRIOR emp.empno = emp.mgr
5 START WITH emp.empno = Get_Emp_Top(emp.deptno)
6 /

SQL> SELECT lvl, ename, empno, mgr, deptno

2 FROM Emp_Hier
3 /

LVL ENAME EMPNO MGR DEPTNO

--------- -------------------- --------- --------- ---------
1 KING 7839 10
2 BLAKE 7698 7839 10
3 MARTIN 7654 7698 10
3 ALLEN 7499 7698 10
3 TURNER 7844 7698 10
3 JAMES 7900 7698 10
3 WARD 7521 7698 10
2 CLARK 7782 7839 10
3 MILLER 7934 7782 10
2 JONES 7566 7839 10
3 FORD 7902 7566 10
4 SMITH 7369 7902 10
5 Ken 999 7369 10
3 SCOTT 7788 7566 10
4 ADAMS 7876 7788 10
1 SONG 6000 40
2 GOMEZ 6001 6000 40
3 WILLIAMS 6002 6001 40
4 DIRKSEN 6003 6002 40
5 ATKINS 6004 6003 40
5 DESZELL 6005 6003 40
5 DEVITT 6006 6003 40
2 SMITH 6007 6000 40
3 GEORGE 6008 6007 40
3 JONES 6009 6007 40
4 MILLER 6010 6009 40
4 BAKER 6011 6009 40

As you can see, we now have a view that will return ONLY the complete hierarchy of
both hierarchies we have defined. We can simply add a predicate to the SELECT from
the view to only display one of the hierarchies, thereby giving us the dynamic selection of
the hierarchy from the view:
SQL> SELECT lvl, ename, empno, mgr, deptno
2 FROM Emp_Hier
3 WHERE DEPTNO = 40
4 /

LVL ENAME EMPNO MGR DEPTNO

Putting a couple of Tips Together

In a previous tip (Tip #40), I detailed a method to allow joins to hierarchical queries. We
can combine that technique with the one from this tip to give us a very powerful view:
CREATE OR REPLACE VIEW emp_hier AS
SELECT emphier.emplevel, emphier.ename ind_ename, emphier.ename
,emphier.empno
,dept.deptno, dept.dname, dept.loc
,emp.ename mgr_ename
FROM Dept, Emp
,(select level emplevel, LPAD(' ',2*level-2)||ename ename,
empno, mgr, deptno
from Emp
connect by prior empno = mgr
start with empno = Get_Emp_Top(emp.deptno)
) emphier
WHERE emphier.deptno = dept.deptno
AND emphier.mgr = emp.empno (+)
Here is an example of using the view:
SQL> select ind_ename, mgr_ename, dname, loc
2 from emp_hier
3 where deptno = 40
4 /

IND_ENAME MGR_ENAME DNAME LOC

-------------------- ---------- -------------- -------------
SONG OPERATIONS BOSTON
GOMEZ SONG OPERATIONS BOSTON
WILLIAMS GOMEZ OPERATIONS BOSTON
DIRKSEN WILLIAMS OPERATIONS BOSTON
ATKINS DIRKSEN OPERATIONS BOSTON
DESZELL DIRKSEN OPERATIONS BOSTON
DEVITT DIRKSEN OPERATIONS BOSTON
SMITH SONG OPERATIONS BOSTON
GEORGE SMITH OPERATIONS BOSTON
JONES SMITH OPERATIONS BOSTON
MILLER JONES OPERATIONS BOSTON
BAKER JONES OPERATIONS BOSTON

Click [here] for a SQL script that creates and populates

the EMP table used in this example, then runs the
example queries. Tip #40: Using "Inline Views" to Join
to Hierarchical Queries (Type: SQL)
Have you ever tried to join to a hierarchical query (a query using CONNECT BY and
PRIOR) only to get this message:
ORA-01437: cannot have join with CONNECT BY
One of the limitations of hierarchical queries is that you cannot join to them. However,
there are often times you would like to join to them anyway. For instance, if the
hierarchy table only has surrogate keys, and you would like to display the real value.
This tip shows how you can use "Inline Views" (which are SELECTs in the FROM
clause) to join tables to a hierarchical query.

Starting With A Standard Hierarchy Query

LEVEL ENAME EMPNO MGR DEPTNO

--------- -------------------- --------- --------- ---------
1 KING 7839 10
2 BLAKE 7698 7839 30
3 MARTIN 7654 7698 30
3 ALLEN 7499 7698 30
3 TURNER 7844 7698 30
3 JAMES 7900 7698 30
3 WARD 7521 7698 30
2 CLARK 7782 7839 30
3 MILLER 7934 7782 10
2 JONES 7566 7839 20
3 FORD 7902 7566 20
4 SMITH 7369 7902 20
5 Ken 999 7369 20
3 SCOTT 7788 7566 20
4 ADAMS 7876 7788 20

Try to Join This Query To the DEPT Table

If you try to join this query to the DEPT table, it won't work:
SQL> l
1 select level, LPAD(' ',2*level-2)||ename ename, empno, mgr,
dept.deptno, dept.dname
2 from emp, dept
3 where emp.deptno = dept.deptno
4 connect by prior empno = mgr
5* start with empno = 7839
SQL> /
from emp, dept
*
ERROR at line 2:
ORA-01437: cannot have join with CONNECT BY

Place the Hierarchical Query in an "Inline View"

Since Oracle 7.3, we could actually use a complete SELECT statement as one of the
"tables" in a query. Using this technique, we can turn the hierarchical query into a "table"
and join it do the DEPT table:
SQL> l
1 SELECT emphier.emplevel, emphier.ename, emphier.empno,
dept.deptno, dept.dname
2 FROM Dept
3 ,(select level emplevel, LPAD(' ',2*level-2)||ename
ename, empno, mgr, deptno
4 from Emp
5 connect by prior empno = mgr
6 start with empno = 7839
7 ) emphier
8* WHERE emphier.deptno = dept.deptno
SQL> /

EMPLEVEL ENAME EMPNO DEPTNO DNAME

--------- -------------------- --------- --------- --------------
1 KING 7839 10 ACCOUNTING
2 BLAKE 7698 30 SALES
3 MARTIN 7654 30 SALES
3 ALLEN 7499 30 SALES
3 TURNER 7844 30 SALES
3 JAMES 7900 30 SALES
3 WARD 7521 30 SALES
2 CLARK 7782 30 SALES
3 MILLER 7934 10 ACCOUNTING
2 JONES 7566 20 RESEARCH
3 FORD 7902 20 RESEARCH
4 SMITH 7369 20 RESEARCH
5 Ken 999 20 RESEARCH
3 SCOTT 7788 20 RESEARCH
4 ADAMS 7876 20 RESEARCH

The SELECT statement inside the parentheses is treated just as if it were a view that you
are joining to. It is given an alias, "emphier", which is used to refer to it in the SELECT
clause (i.e. "emphier.ename"), and in the WHERE clause (i.e. "emphier.deptno"). Since it
is treated like a view, we can join it to the Dept table with the following predicate:
WHERE emphier.deptno = dept.deptno
This will allow you to display the department name ("DNAME") in your hierarchical
query.

Putting the Query into a View

Quite often, these hierarchical queries can be useful in many programs and reports. It is
often helpful to create a view that lists the hierarchy and joins to useful tables. Here is an
example of a view using the EMP/DEPT tables. This view allows you to list the
department name and location and the manager name in the query:
CREATE OR REPLACE VIEW emp_hier AS
SELECT emphier.emplevel, emphier.ename ind_ename, emphier.ename
,emphier.empno
,dept.deptno, dept.dname, dept.loc
,emp.ename mgr_ename
FROM Dept, Emp
,(select level emplevel, LPAD(' ',2*level-2)||ename ename,
empno, mgr, deptno
from Emp
connect by prior empno = mgr
start with empno = 7839
) emphier
WHERE emphier.deptno = dept.deptno
AND emphier.mgr = emp.empno (+)
Here is an example of using the view:
SQL> select ind_ename, mgr_ename, dname, loc
2 from emp_hier
3
SQL> /

IND_ENAME MGR_ENAME DNAME LOC

-------------------- ---------- -------------- -------------
KING ACCOUNTING NEW YORK
BLAKE KING SALES CHICAGO
MARTIN BLAKE SALES CHICAGO
ALLEN BLAKE SALES CHICAGO
TURNER BLAKE SALES CHICAGO
JAMES BLAKE SALES CHICAGO
WARD BLAKE SALES CHICAGO
CLARK KING SALES CHICAGO
MILLER CLARK ACCOUNTING NEW YORK
JONES KING RESEARCH DALLAS
FORD JONES RESEARCH DALLAS
SMITH FORD RESEARCH DALLAS
Ken SMITH RESEARCH DALLAS
SCOTT JONES RESEARCH DALLAS
ADAMS SCOTT RESEARCH DALLAS

Tip #38: Listing Records with the Highest Values using

SQL Only. (Type: SQL)
There are times where you want to simply return the rows with a certain number of the
highest (or lowest) values for a certain column. This type of functionality is easy to
implement in PL/SQL (just order by the column and grab the first n rows from the query),
but more difficult to do using SQL only. This tip shows you a method to do this in SQL.

Data Used for The Examples in this Tip

The following data (from the infamous EMP table) will be used for all of the examples in
this Tip:
SQL> desc emp
Name Null? Type
------------------------------- -------- ----
EMPNO NOT NULL NUMBER(4)
ENAME CHAR(10)
JOB CHAR(9)
MGR NUMBER(4)
HIREDATE DATE
SAL NUMBER(7,2)
COMM NUMBER(7,2)
DEPTNO NOT NULL NUMBER(2)

SQL> SELECT empno, sal FROM EMP;

EMPNO SAL
--------- ---------
41 4200
46 6800
99 9000
23 2000
11 4000
10 3500
51 4500
52 4500
53 8000
54 2900

10 rows selected.

ROWNUM does not work!

Many SQL begginers are tempted to try to use ROWNUM along with an ORDER BY to
limit the rows returned to the highest values. However, this does not work, becuase
Oracle sets the ROWNUM value before the query results are ordered! Consider the
following query:

SQL> SELECT empno, sal, rownum

2 FROM Emp
3 ORDER BY sal DESC
4
SQL> /

EMPNO SAL ROWNUM

--------- --------- ---------
99 9000 3
53 8000 9
46 6800 2
51 4500 7
52 4500 8
41 4200 1
11 4000 5
10 3500 6
54 2900 10
23 2000 4

Notice that the records are ordered by the SAL column, but not the ROWNUM column.
If you added a where clause to limit the query to the first three ROWNUMs, you would
get:

SQL> l
1 SELECT empno, sal, rownum
2 FROM Emp
3 WHERE ROWNUM < 4
4* ORDER BY sal DESC
SQL> /

EMPNO SAL ROWNUM

--------- --------- ---------
99 9000 3
46 6800 2
41 4200 1

Which does NOT return the three highest SALs!

Solution: Correlated SubQuery to Same Table

One solution for this problem is to use a correlated subquery to the same table. The
following select will return the correct rows:

SQL> l
1 SELECT empno, sal
2 FROM Emp e1
3 WHERE 3 > (SELECT COUNT(*) FROM Emp e2
4 WHERE e1.sal < e2.sal)
5* ORDER BY SAL desc
SQL> /

EMPNO SAL
--------- ---------
99 9000
53 8000
46 6800

For every row processed by the main query, the correlated subquery returns a count
(COUNT(*) ) of the number of rows with higher salaries (WHERE e1.sal < e2.sal). Then
the main query only returns rows that have fewer than three salaries that are higher
(WHERE 3 > ...). For example, for EMPNO=46, the salary is "6800". There is only 1
row with a higher salary (EMPNO=99), so the subquery returns "1", which is less than 3,
causing the "WHERE 3 > ..." to evaluate to TRUE, thereby returning the row.

A Problem With This Technique

However, there is a problem with this method. What if there are more than one row with
the same salary? Consider the following query, where we change it to return the first 4
rows:

SQL> l
1 SELECT empno, sal
2 FROM Emp e1
3 WHERE 4 > (SELECT COUNT(*) FROM Emp e2
4 WHERE e1.sal < e2.sal)
5* ORDER BY SAL desc
SQL> /

EMPNO SAL
--------- ---------
99 9000
53 8000
46 6800
51 4500
52 4500

Instead of returning 4 rows, it returned 5! This is because this technique returns ALL of
the rows with the highest 4 salaries, not the first 4 rows. This is a problem with this
technique, so you need to make sure that it is acceptible in your design before you use it.

An Alternative Technique which Lists Rank

If you want to use a join instead of a correlated subquery, you could use the following
select:

SQL> l
1 SELECT e1.deptno, e1.empno, e1.sal, COUNT(distinct e2.empno)
2 FROM Emp e1, Emp e2
3 WHERE e1.sal <= e2.sal
4 GROUP BY e1.deptno, e1.empno, e1.sal
5* ORDER BY COUNT(distinct e2.empno)
SQL> /

DEPTNO EMPNO SAL COUNT(DISTINCTE2.EMPNO)

--------- --------- --------- -----------------------
30 99 9000 1
50 53 8000 2
20 46 6800 3
40 51 4500 5
50 52 4500 5
20 41 4200 6
40 11 4000 7
40 10 3500 8
50 54 2900 9
30 23 2000 10

This select turns the correlated subquery into a self-join with a GROUP BY. This allows
us to change the count into a sort of RANK. However, the problem with equal salaries
remains (notice the two records with a "rank" of 5).

This rank can then be used to select the first three rows:

SQL> l
1 SELECT e1.deptno, e1.empno, e1.sal, COUNT(distinct e2.empno)
2 FROM Emp e1, Emp e2
3 WHERE e1.sal <= e2.sal
4 GROUP BY e1.deptno, e1.empno, e1.sal
5 HAVING COUNT(distinct e2.empno) < 4
6* ORDER BY COUNT(distinct e2.empno)
SQL> /

DEPTNO EMPNO SAL COUNT(DISTINCTE2.EMPNO)

--------- --------- --------- -----------------------
30 99 9000 1
50 53 8000 2
20 46 6800 3

One advantage of this method is that it can be easily used to return the record for just one
ranking. For example:
SQL> l
1 SELECT e1.deptno, e1.empno, e1.sal, COUNT(distinct e2.empno)
2 FROM Emp e1, Emp e2
3 WHERE e1.sal <= e2.sal
4 GROUP BY e1.deptno, e1.empno, e1.sal
5 HAVING COUNT(distinct e2.empno) = 7
6* ORDER BY COUNT(distinct e2.empno)
SQL> /

DEPTNO EMPNO SAL COUNT(DISTINCTE2.EMPNO)

--------- --------- --------- -----------------------
40 11 4000 7

Tip #32: Script to List Trigger Errors & Line Numbers (Type: PL/SQL)

When a trigger is created for a table, sometimes there are compilation errors (hey, were
not all perfect programmers). When you have errors, you can list the trigger's syntax
errors by using the SHOW ERRORS TRIGGER <Trigger_Name> command. However,
many times these messages are cryptic, and it can be difficult to match the error to the
specific line of code in the trigger. This tip shows a method that can be used to list the
errors, along with the trigger source, and indicating which line of source has each error.

My thanks to Tim Onions, a Principal Technical Consultant at AT&T in the UK for asking
if it was possible to do this, and spurring me on to attempting it. He also reviewed the
script and made improvement suggestions. Also, thanks to Jurij Modic of the Republic of
Slovenia Ministry of Finance for pointing out a major flaw in the original tip.

The Stanard SHOW_ERRORS command

Here is an example of using the SHOW ERRORS command for triggers:

KATKINS> CREATE OR REPLACE TRIGGER Test_Trigger
2 before insert or update of price on items
3 for each row
4 BEGIN
5 -- If extended amout is greater than $10,000 set the
status
6 -- to pending approval, else approve the item.
7 IF (new.price*new.amount) > 10000 THEN
8 :new.status = 'P';
9 ELSE
10 :new.status := 'A';
11 END IF;
12 END;
/

Warning: Trigger created with compilation errors.

KATKINS> show errors trigger Test_Trigger

LINE/COL
ERROR
---------
------------------------------------------------------------

5/17 PLS-00103: Encountered the symbol "=" when

expecting one of the following:
:= . ( @ % ; indicator
The symbol ":= was inserted before "=" to
continue.
The errors go into USER_ERRORS, just like stored procedure errors:
DES2OWNER> l
1 SELECT line, text FROM User_Errors
2 WHERE name = 'PVNT_DUP_ENT_ER_TR'
3* order by sequence
DES2OWNER> /
>

LINE
TEXT

----------
------------------------------------------------------------

5 PLS-00103: Encountered the symbol "=" when

expecting one of the following:
:= . ( @ % ; indicator
The symbol ":= was inserted before "=" to
continue.

DES2OWNER>

Merging the errors with the source.

As you can see, it is fairly easy to select from this table to see the errors. But I wanted to
do something more. I want to list the code of the trigger along with the arrows, and have
the listing point to the line in the code with the error, just like I did for packages,
procedures, & Functions in Tip #3.

The PL/SQL source for packages, procedures, & functions is stored in USER_SOURCE.
However, the source of the trigger is NOT stored in USER_SOURCE. Instead, it is stored
in the TRIGGER_BODY column of USER_TRIGGER. Since TRIGGER_BODY is a
LONG column, it is difficult to work with directly (i.e. you cannot use SUBSTR and
INSTR on it). Because of this, I wrote a stored procedure that parses it into lines, gives
the lines line numbers, then matches those lines to the value in the LINE column of
USER_ERRORS. Then, using DBMS_OUTPUT to display the results, I can get the
output of this program to look very similar to the stored programs error output I got in
Tip #3.

Here is the procedure:

/**********************************************************************
**/
/* LIST_TRIG_ERR - A procedure that uses DBMS_OUTPUT to list the
*/
/* compilation errors of a trigger, along with the
*/
/* trigger's source. Also indicates the source line
*/
/* with the error.
*/
/*
*/
/* Inputs: p_Trigger = The trigger name.
*/
/*
*/
/* Author: Ken Atkins
([email protected]) */
/* Principal Consultant - ARIS Corporation
*/
/*
*/
/* Please feel free to use and modify this script as long as it is not
*/
/* sold or included in any software without the prior permission of
*/
/* the author. If you do make good improvements, please send them to
*/
/* me and I will incorporate them in a future version of the script
*/
/* (giving you credit of course!).
*/
/*
*/
/* Modifications:
*/
/*---------------------------------------------------------------------
-*/
/* Ver Date By Change
*/
/* --- --------- --------------
----------------------------------------*/
/* 1.0 05-MAR-98 Ken Atkins Written.
*/
/**********************************************************************
**/
CREATE OR REPLACE PROCEDURE LIST_TRIG_ERR(p_Trigger IN VARCHAR2) AS
v_Trig LONG;
b_Continue BOOLEAN := True;
v_NumLines NUMBER := 0;
v_Line VARCHAR2(240);
v_NxtChr NUMBER := 0;
v_LstChr NUMBER := 0;
TYPE LineTabTyp IS TABLE OF VARCHAR2(240)
INDEX by BINARY_INTEGER;
t_Lines LineTabTyp;
CURSOR err_cur IS SELECT line, text
FROM User_Errors
WHERE name = p_Trigger
AND text not like '%Statement ignored%';
i NUMBER;
v_Prefix CHAR(10);
v_DDLCursor NUMBER;
v_DDLReturn NUMBER;
BEGIN
--
-- Fetch the trigger code into a variable that will be used to parse
it.
--
BEGIN
SELECT trigger_body INTO v_Trig
FROM User_Triggers
WHERE Trigger_Name = p_Trigger;
EXCEPTION
WHEN NO_DATA_FOUND THEN
Raise_Application_Error(-20001,'Trigger does not exist: '||
p_Trigger);
END;

--
-- Use DBMS_SQL to execute the command that places the errors into
USER_ERRORS
--
v_DDLCursor := dbms_sql.open_cursor;
DBMS_SQL.Parse(v_DDLCursor,'ALTER TRIGGER '||p_Trigger||' COMPILE
DEBUG',1);
v_DDLReturn := dbms_sql.execute(v_DDLCursor);
DBMS_SQL.Close_Cursor(v_DDLCursor);

--
-- Now loop through the lines in the trigger code and parse it into
separate
-- record in a PL/SQL table.
--
WHILE b_Continue LOOP
v_NumLines := v_NumLines + 1;
v_NxtChr := INSTR(v_Trig, CHR(10),1,v_NumLines);
v_Line := SUBSTR(v_Trig, v_LstChr+1, (v_NxtChr-v_LstChr));
t_Lines(v_NumLines) := v_Line;
IF v_NxtChr = 0 THEN
b_Continue := False;
ELSE
v_LstChr := v_NxtChr;
END IF;
END LOOP;

--
-- Loop through all of the errors in USER_ERRORS for this trigger,
displaying
-- each error, followed by the triggers code, with an ===>
pointing to the
-- error line.
--
DBMS_OUTPUT.Put_Line('.');
FOR e IN err_cur LOOP
DBMS_OUTPUT.Put_Line(e.text);
DBMS_OUTPUT.Put_Line('.');
FOR i IN 1..v_NumLines LOOP
IF e.line = i THEN

v_Prefix := '========> ';

ELSE
-- Note: The dots (...) are used because DBMS_OUTPUT normally
strips leading spaces
v_Prefix := '......... ';
END IF;
DBMS_OUTPUT.Put_Line(v_Prefix||to_char(i)||': '||t_Lines(i));
END LOOP;
DBMS_OUTPUT.Put_Line('.');
END LOOP;

END;
/
Here is an example of using the procedure. First, I created a simple sql script to call the
procedure:
set serveroutput on size 100000
execute list_trig_err(UPPER('&1'));
Then, after creating the trigger, I can call this script to detail the errors.

An Example of Using the Scripts

Here is an example of listing the errors for a trigger::

Warning: Trigger created with compilation errors.

KATKINS> @trigerr TEST_TRIGGER

PLS-00103: Encountered the symbol "=" when expecting one of
the following:
:= . ( @ % ; indicator
The symbol ":= was inserted before "=" to continue.

......... 1: BEGIN
......... 2: -- If extended amout is greater than $10,000
set the status

......... 3: -- to pending approval, else approve the

item.

......... 4: IF (new.price*new.amount) > 10000 THEN

========> 5: :new.status = 'P';

......... 6: ELSE

......... 7: :new.status := 'A';

......... 8: END IF;

......... 9: END;

.........
10:

Tip #30: An easy way to EXPLAIN and get some statistics on your SQL.
(Type: SQL*Plus)

Haven't you ever thought there should be an easier way to do the EXPLAIN PLAN and
TKPROF statistics than to edit your queries to add the commands (like EXPLAIN PLAN
SET...), or to have to find or write a script that automates this? It should be an automatic
part of SQL*Plus. Well, as of SQL*Plus 3.3 it is!! The command is called 'SET
AUTOTRACE ON'!

My thanks go out to Jack Applewhite for pointing out this command in a post to the
ODTUG email lists.

The SET AUTOTRACE Command

In SQL*Plus 3.3 there is a little known command (at least I didn't know about it until
recently) called SET AUTOTRACE. It is documented in the newest SQL*Plus document
set, but who really reads the whole document set for changes? Well I did not. It is very
simple to use. Just type the command:

SET AUTOTRACE ON
And then run your select statement. Example:

SQL> SET AUTOTRACE ON

SQL> SELECT d.deptno, d.dname, e.empno, e.ename

2 FROM dept d, emp e

3 WHERE d.deptno = e.deptno

4 /

DEPTNO DNAME EMPNO ENAME

---------- -------------- ---------- ----------

10 ACCOUNTING 7839 KING

30 SALES 7900 JAMES

30 SALES 7521 WARD

14 rows selected.

Execution Plan

----------------------------------------------------------

0 SELECT STATEMENT Optimizer=CHOOSE

1 0 MERGE JOIN

2 1 SORT (JOIN)

3 2 TABLE ACCESS (FULL) OF 'EMP'

4 1 SORT (JOIN)

5 4 TABLE ACCESS (FULL) OF 'DEPT'

Statistics

----------------------------------------------------------

0 recursive calls

4 db block gets

2 consistent gets

0 physical reads

0 redo size

670 bytes sent via SQL*Net to client

376 bytes received via SQL*Net from client

3 SQL*Net roundtrips to/from client

2 sorts (memory)

0 sorts (disk)

14 rows processed

There are also some other options, for example there is a TRACEONLY option which
supresses the SQL output. See the SQL*Plus 3.3 manual for a full description.

Some setup issues:

If you go off and try this on your instance, you may run into some problems. There are a
few setup steps that need to be taken to make this work:

1. Make sure you have access to PLAN_TABLE. If you don't, create it using
utlxplan.sql (It should be in a directory like $ORACLE_HOME/rdbms73/admin/)
and make sure you have access to it from the user you are using to tune the SQL.
2. You also need to create the PLUSTRACE role, and grant it to the desired users.
The script to create this role is in:

$ORACLE_HOME/plus33/Plustrce.sql

It has to be run from SYS in order to have the correct security access. Then grant
the role to the desired users or ROLEs.
Tip #28: Setting the SQL*Plus prompt to the current directory. (Type:
SQL*Plus)

Have you ever had a SQL*Plus window open, and did not remember what it's current
directory was? This tip will show a method to set your SQL*Plus prompt to include the
current directory.

The SET SQLPROMPT command can be used to set the SQL*Plus prompt to any text
string you want. The trick is to get access to the current directory from SQL*Plus, so you
can use it in SET SQLPROMPT.

We have access to the current directory from the OS (via 'cd' in DOS/NT and 'pwd' in
Unix). We can also call an OS script by using the SQL*Plus HOST command. Using
these two capabilities, I wrote two scripts that together performed the function I wanted:

1. A .bat script that writes a SQL script to do the actual SET SQLPROMPT, using
the 'cd' command to insert the current directory.
2. A sql script that executes the .bat script and runs the SQL script that it has written.

Here are the two scripts:

setprmpt.bat
-----------------
echo set define $ > tmp.sql
echo column curdir noprint new_value curdir >> tmp.sql
echo SELECT REPLACE(' >> tmp.sql
cd >> tmp.sql
echo ',CHR(10),'') curdir FROM DUAL; >> tmp.sql
echo set sqlprompt "($curdir) SQL> " >> tmp.sql

setprmpt.sql
-----------------
host setprmpt.bat
@tmp
set define &
Here is an example of using the scripts to set the prompt:

SQL> @setprmpt

(C:\d2k\working) SQL>

How these scripts work

The 'host' command in the .sql scriptexecutes the .bat script. The .bat script then writes
the following commands to a temporary sql script (called tmp.sql):

set define $

column curdir noprint new_value curdir

SELECT REPLACE('

C:\d2k\working

',CHR(10),'') curdir FROM DUAL;

set sqlprompt "($curdir) SQL> "

The .sql script then executes this temporary script file. The TMP.SQL script had to be so
complicated because I was only using the DOS output redirection capabilities ('>' and
'>>') and I could only get the current directory into the file on it's own line. The
REPLACE(..,CHR(10),'') command removes the carriage return before and after the
directory line.

The 'column .. new_value' command is a SQL*PLUS command that allows the value of a
selected column to be placed into a SQL*Plus variable (in this case 'curdir'). Therefore,
when the following SELECT.. is run, the text string of the current directory is placed in
the 'curdir' SQL*Plus variable. Then the SET SQLPROMPT uses this variable to set the
prompt.

Another feature of this technique, is that you now have the SQL*Plus variable with the
current directory available for other uses in this SQL*Plus session. For example, it can be
used in a select like:

(C:\fmpt\sql) SQL> select '&curdir' from dual;

old 1: select '&curdir' from dual

new 1: select 'C:\fmpt\sql' from dual

'C:\FMPT\SQ

-----------

C:\fmpt\sql
The above .bat file is NOT pretty. Using Perl or some other scripting language, I could
write a simple script that would just write the SET SQLPROMPT command directly
without the use of the 'column' command or the 'SELECT'.

Tip #24: Ordering numerically in a VARCHAR2 column. (Type: SQL)

Have you ever tried to order by a VARCHAR2 column that has numeric information in
it? Your query is sorted ALPHABETICALLY instead of numerically. That is, your order
is 1,10,2,20,200,3,4... instead of 1,2,3,4,10,20,200. If you try to use TO_NUMBER in the
order_by your query blows up if there are any alpha characters in the column. This tip
details a method that can be used to have the order_by return the columns numerically
even if there are some alpha characters in the column.

Consider the following table:

SQL> desc NUMBER_SORT

Name Null? Type

------------------- -------- ------------
sortby NOT NULL VARCHAR2(20)

SQL> SELECT * from NUMBER_SORT

SORTBY

--------------------

100

1AB

BBBB

1000

3
200

14 rows selected.
If you do a simple order_by your result will be:
SQL> SELECT sortby
2 FROM Number_Sort
3 ORDER BY sortby;

SORTBY

--------------------

100

1000

1AB

200

BBBB

14 rows selected.
Which is not what you want! However, the following select WILL return the column
ordered numerically:
SQL> SELECT sortby
2 FROM Number_Sort
3 ORDER BY
DECODE(TO_CHAR(NVL(LENGTH(TRANSLATE(sortby,'A1234567890','A')),0)),'0',LPAD(sor
tby,8),sortby)
4 /
SORTBY

--------------------

100

200

1000

1AB

BBBB

14 rows selected.
Now let's take that construct apart to see how it works:

1. TRANSLATE(sortby,'A1234567890','A') - This usage of TRANSLATE strips

all of the numeric characters (1..9) out of the value of sortby. For any row where
sortby ONLY contains numeric characters, it returns a null string ('').
2. NVL(LENGTH(....),0)) - This part determines the length of the TRANSLATEd
string, and NVLs it to 0 if the string is null. The SQL construct up to this point
will return 0 if sortby has only numeric characters, and will return a positive
integer if there are any non-numeric characters. .
3. TO_CHAR(....) - Converts the number returned by the LENGTH into a varchar.
This needs to be done so that the DECODE will work correctly.
4. DECODE(....,'0',LPAD(sortby,8),sortby) - Now we come to the guts of this
technique. This DECODE checks to see if the value is numeric only (a LENGTH
of '0'), and if so, returns the value of sortby LPADed to 8 characters. If the value
has any alpha characters (LENGTH > 0) it just returns sortby without any
modification.

Now why do we want to LPAD the numeric values only? Because space (' ') sorts
BEFORE the numbers! This allows for a decimal place by decimal place comparison of
the two numbers. The '1' will return with 7 leading blanks, the '10' with 6, ect. When the
alphabetical sort is done, the values are compared, character by character, and blank sorts
before the numbers. If you selected the SQL construct that you are sorting by, you would
see something like:
SQL> SELECT
DECODE(TO_CHAR(NVL(LENGTH(TRANSLATE(sortby,'A1234567890','A')),0)),'0',LPAD(sortby,8),s
ortby)
2 FROM Number_Sort
3 ORDER BY
DECODE(TO_CHAR(NVL(LENGTH(TRANSLATE(sortby,'A1234567890','A')),0)),'0',LPAD(sortby,8),s
ortby)
4 /

SORTBY

--------------------

100

200

1000
1AB

BBBB

14 rows selected.

The '8' I used in the LPAD is just arbitrary. If I had 15 digit numbers in
the SORTBY column, I would use a value greater than 15 so that any
number would sort correctlyTip #23: Using a Database Function to Query
by a LONG Column. (Type: SQL)

Have you ever tried to use LONG columns in the WHERE clause of your SQL
statement? Something
like 'WHERE long_column like '%SEARCH%'? If so, you know this does not work!
(You get 'ORA-00932:
inconsistent datatypes') This tip shows how you can use database functions to avoid this
limitation, and
query by LONG columns anyway.

Consider the following table:

LONG_WHERE
==========
Name Null? Type
------------------- -------- ----
LONG_ID NOT NULL NUMBER
LONG_DESC LONG
If you tried to select by the long column, you might use something like:

SQL> SELECT * FROM Long_Where

2 WHERE long_desc like '%SEARCH%';
WHERE long_desc like '%SEARCH%'
*
ERROR at line 2:
ORA-00932: inconsistent datatypes
Which does not work! One way around this limitation is to write a database function
'wrapper' for the
long column. This function would accept the PK of the table as an input parameter, and
return the
LONG column's value, converted to a VARCHAR2. Here is an example of such a
function:

CREATE OR REPLACE FUNCTION vc_desc(p_ID IN NUMBER) RETURN

VARCHAR2 IS
v_desc VARCHAR2(2000);
v_Long LONG;
BEGIN
SELECT long_desc INTO v_Long
FROM Long_where
WHERE long_id = p_ID;
v_Desc := SUBSTR(v_Long,1,2000);
RETURN(v_Desc);
END;
Now you can use this function in the where clause instead of using the LONG column
directly. For example:

SQL> SELECT long_id, long_desc

2 FROM Long_Where
3 WHERE vc_desc(long_id) like '%SEARCH%'
4 /

LONG_ID
LONG_DESC

---------
-------------------------------------------------------
2 Another bunch of text to
place into a long value. Search for SEARCH2 somewhere

4 Search for SEARCH3 in here

You are limited to searching the first 2000 characters of the long column, but this is often
good enough.

Tip #19: Selecting ONLY the group with the maximum Sum in a group
query. (Type: SQL)

Let's say you have a select that is summing by a key value, and you want to only return
the key that has the maximum sum (not ALL of the rows like a group by will). This tip
will show a SQL statement that does this.

Consider the following tables and data:

SUM_PARENT
----------
Name Null? Type
------------------- -------- ----
SUM_ID NUMBER
SUM_NAME VARCHAR2(10)

SELECT * FROM Sum_Parent;

SUM_ID SUM_NAME
--------- ----------
1 ONE
2 TWO
3 THREE
4 FOUR
5 FIVE
SUM_CHILD
---------
Name Null? Type
------------------- -------- ----
SUM_ID NUMBER
QTY NUMBER

SELECT * FROM Sum_Child;

SUM_ID QTY
--------- ---------
1 10
1 20
1 5
2 10
2 5
3 3
3 2
4 30
4 2
5 10
The following simple GROUP BY select will return the sum of the QTY for each key
(SUM_NAME):
SELECT p.sum_name, sum(c.qty)
FROM Sum_Parent p, Sum_Child c
WHERE p.sum_id = c.sum_id
GROUP BY p.sum_name
/

SUM_NAME SUM(C.QTY)
---------- ----------
FIVE 10
FOUR 32
ONE 35
THREE 5
TWO 15
Let's say you only want to return the row with the MAXIMUM quantity
(SUM_NAME=ONE). To do this, you can add a HAVING predicate related to a sub-
query. The HAVING is needed to be able to use the SUM(c.qty) in a predicate. An
example of this follows:
SELECT p.sum_name, sum(c.qty)
FROM Sum_Parent p, Sum_Child c
WHERE p.sum_id = c.sum_id
GROUP BY p.sum_name
HAVING SUM(c.qty) =
(SELECT MAX(SUM(c2.qty))
FROM Sum_Child c2
GROUP BY c2.sum_id
)
/

SUM_NAME SUM(C.QTY)
---------- ----------
ONE 35
Which is the desired result. One caution however, if there are more than one key with the
maximum sum, the query will return ALL of them. For instance, if the following data is
added to the SUM_CHILD table:
SUM_ID QTY
--------- ---------
3 30
The above query will return the following result.
SUM_NAME SUM(C.QTY)
---------- ----------
ONE 35
THREE 35

This query is not very efficient however. If you have PL/SQL available to you, you can
get the same result by creating a cursor with the first query, adding an order by clause,
and only fetching the first row. This will avoid the second sum, which will give it better
performance. Here is an example of this:
set serveroutput on
DECLARE
CURSOR sum_cur IS
SELECT p.sum_name, sum(c.qty)
FROM Sum_Parent p, Sum_Child c
WHERE p.sum_id = c.sum_id
GROUP BY p.sum_name
ORDER BY sum(c.qty) desc;
SumName VARCHAR2(10);
SumQty NUMBER;
BEGIN
OPEN sum_cur;
FETCH sum_cur INTO SumName, SumQty;
CLOSE sum_cur;
DBMS_OUTPUT.PUT_LINE('SUM_NAME: '||SumName||' Sum(Qty):
'||to_char(SumQty));
END;
/
SUM_NAME: ONE Sum(Qty): 35

PL/SQL procedure successfully completed.

If there are more than one row with the same maximum sum, this PL/SQL program will
only return the first one it encounters. Therefore, the program should be expanded to
handle this by either returning multiple values, or ordering by the key also (which will
ensure consistancy if nothing else).

Tip #18: Using Database Functions to Eliminate Outer Joins. (Type:

PL/SQL & SQL)

Outer joins are very useful in SQL to return data from queries where some of the
relationships are optional. However, there are times when the outer joins can cause some
problems. Sometimes they will make the query run very slowly. There is also a restriction
that you can only outer a table to ONE other table. In these cases, database functions can
be used to eliminate the need for the outer joins. This tip will detail how to do this for the
following two examples:

• Elimination of Multiple Outer Joins in ARC usage.

• Allowing 'Outer Join' to Multiple Tables.

Consider the following data model:

Assuming the data looks like:

OUTER_ELIM
==========
PK KTYPE KEY1 KEY2 KEY3
--------- ----- --------- --------- ---------
1 1 1
2 1 2
3 1 3
5 2 1
6 2 2
7 2 3
9
10 3 1
11 3 2

LOOKUP1 LOOKUP2 LOOKUP3

======= ======= =======
KEY1 LABEL1 KEY2 LABEL2 KEY3
LABEL3
--------- ---------- --------- ---------- ---------
----------
1 1-ONE 1 1-TWO 1
1-THREE
2 2-ONE 2 2-TWO 2
2-THREE
3 3-ONE 3 3-TWO 3
3-THREE

OUTER_ELIM_CLD CROSS_LABEL
============== ===========
PK KEY4 KEY1 KEY4
CROSS_LABEL
--------- --------- --------- ---------
---------------
1 1 1 2 L1-1 X
L4-2
1 2 3 1 L1-3 X
L4-1
1 3
2 1
2 2
2 3
3 1
3 2
3 3

This data model will be used to illustrate both examples of using a database function to
eliminate outer joins:

Elimination of Multiple Outer Joins in ARC usage.

Let's say you need a SQL select statement to implement the above arc (from
OUTER_ELIM to LOOKUP1,2,3). For example, you want to display only ONE of the
labels (either LABEL1, LABEL2, or LABEL3) depending on the value of the
KEY_TYPE column. The following SQL statement could be used to do this:
/* tip18q1.sql */
SELECT oe.pk,
DECODE(ktype,'1',l1.label1,'2',l2.label2,'3',l3.label3)
Label
FROM outer_elim oe, lookup1 l1, lookup2 l2, lookup3 l3
WHERE oe.key1 = l1.key1 (+)
AND oe.key2 = l2.key2 (+)
AND oe.key3 = l3.key3 (+)
ORDER BY
DECODE(ktype,'1',l1.label1,'2',l2.label2,'3',l3.label3)
/

This SQL statement will return:

PK LABEL
--------- ----------
1 1-ONE
10 1-THREE
5 1-TWO
2 2-ONE
11 2-THREE
6 2-TWO
3 3-ONE
7 3-TWO
9

However, sometimes having multiple outer joins can cause performance problems.
Especially when there are many tables joined together.
A database function can be used to get the same query results without using an outer join.
To do this, first create the following database function:

/* tip18fun.sql */
CREATE OR REPLACE
FUNCTION comb_label(pType IN VARCHAR2
,pKey1 IN NUMBER,pKey2 IN NUMBER,pKey3 IN NUMBER)
RETURN VARCHAR2 IS
vReturn VARCHAR2(10);
BEGIN
IF pType = '1' THEN
BEGIN
SELECT label1 INTO vReturn
FROM lookup1
WHERE key1 = pKey1;
END;
ELSIF pType = '2' THEN
BEGIN
SELECT label2 INTO vReturn
FROM lookup2
WHERE key2 = pKey2;
END;
ELSIF pType = '3' THEN
BEGIN
SELECT label3 INTO vReturn
FROM lookup3
WHERE key3 = pKey3;
END;
END IF;
RETURN(vReturn);
END;
/
This function can be used in the following SQL to return the same results as the first
query, but without any outer joins:
/* tip18q2.sql */
column label format a12;
SELECT oe.pk, comb_label(ktype,key1,key2,key3) Label
FROM outer_elim oe
ORDER BY comb_label(ktype,key1,key2,key3)
/

Using a Database Function to allow Outer Join to Multiple Tables.

There are times when you really want to outer join one table to two different tables.
When this happens, the restriction can be frustrating. In the above data model, you might
want to do an outer join from the CROSS_LOOKUP table to both the OUTER_ELIM
and OUTER_ELIM_CLD tables. To do this, you might try to use a SQL statement like:

/* tip18q3.sql */
SELECT oe.pk, l1.label1, l4.label4, cl.cross_label
FROM outer_elim oe, outer_elim_cld cld, lookup1 l1,
lookup4 l4
,cross_lookup cl
WHERE oe.pk = cld.pk
AND oe.key1 = l1.key1
AND cld.key4 = l4.key4
AND cl.key1 (+) = oe.key1
AND cl.key4 (+) = cld.key4
/
Which will cause the following error:
AND cl.key1 (+) = oe.key1
*
ERROR at line 7:
ORA-01417: a table may be outer joined to at most one other
table
This error occurs because Oracle will not let you have an outer join from ONE table to
two DIFFERENT tables.

However, you CAN get the desired effect using a database function. If the following
function is created:
/* tip18fn2.sql */
CREATE OR REPLACE
FUNCTION cross_label(pKey1 IN NUMBER,pKey4 IN NUMBER)
RETURN VARCHAR2 IS
vReturn VARCHAR2(15);
BEGIN
SELECT cross_label INTO vReturn
FROM cross_lookup
WHERE key1 = pKey1
AND key4 = pKey4;
RETURN(vReturn);

EXCEPTION
WHEN NO_DATA_FOUND THEN
RETURN('');
END;
/
then the following SQL can be used to return the 'outer join' values from the
CROSS_LOOKUP:
/* tip18q4.sql */
column cross_label format a15
SELECT oe.pk, l1.label1, l4.label4, cross_label(oe.key1,
cld.key4) cross_label
FROM outer_elim oe, outer_elim_cld cld, lookup1 l1,
lookup4 l4
WHERE oe.pk = cld.pk
AND oe.key1 = l1.key1
AND cld.key4 = l4.key4
/
This select will return:
PK LABEL1 LABEL4 CROSS_LABEL
--------- ---------- ---------- ---------------
1 1-ONE 1-FOUR
1 1-ONE 2-FOUR L1-1 X L4-2
1 1-ONE 3-FOUR
2 2-ONE 1-FOUR
2 2-ONE 2-FOUR
2 2-ONE 3-FOUR
3 3-ONE 1-FOUR L1-3 X L4-1
3 3-ONE 2-FOUR
3 3-ONE 3-FOUR
Stored procedures and functions are very powerful. These are just some simple examples
to get people thinking about some possible ways of using them.

Tip #17: Calculating a running total with SQL only. (Type: SQL)

There are applications where the running total for a series of numbers needs to be
calculated and displayed. While this might be normally considered something that would
be done with 3GL programming techniques, it IS possible to calculate and query a
running total with SQL only.

First, we need to have a 'key' column to order the query by

Let's assume we have a table with a numeric column that we want. We also need to have
a column to order the display by, or a running total does not make sense! Many times this
will be a date column. This could also be the PK of the table, or a single or multiple
column UK. I will use a date column in the following example. Consider the table:

SQL> desc Run_Total

Name Null? Type

------------------------------- -------- ----
RUN_DATE DATE
RUN_VALUE NUMBER

SQL> select * from Run_Total;

RUN_DATE RUN_VALUE
--------- ---------
02-APR-97 10
03-APR-97 5
04-APR-97 20
05-APR-97 15
06-APR-97 45
07-APR-97 12
08-APR-97 37
09-APR-97 9
10-APR-97 23
11-APR-97 19
12-APR-97 10
11 rows selected.

A self-join is needed to perform the correct sum

In order to produce the running total, a self-join is needed to sum all of the values of the
table less than or equal to each row. The query is grouped by the records in the 'driving'
table in the join, and ordered by the run_date:

SELECT r1.run_date, r1.run_value, sum(r2.run_value)

Running_Total
FROM Run_Total r1, Run_Total r2
WHERE r2.run_date <= r1.run_date
GROUP BY r1.run_date, r1.run_value
ORDER BY r1.run_date
/

This query will produce the following output:

RUN_DATE RUN_VALUE RUNNING_TOTAL

--------- --------- -------------
02-APR-97 10 10
03-APR-97 5 15
04-APR-97 20 35
05-APR-97 15 50
06-APR-97 45 95
07-APR-97 12 107
08-APR-97 37 144
09-APR-97 9 153
10-APR-97 23 176
11-APR-97 19 195
12-APR-97 10 205

11 rows selected.
Tip #6: Using SQL only to Determine the Business Days Between Two
Dates. (Type: SQL)

There are many times in reports or in calculations for forms where the number of
business days between two dates needs to be determined. Here is a method for
caluculating this (excluding holidays) using SQL only.

The following SQL script shows an algorythm that uses the standard Oracle date
functions to calculate the number of business days between to dates. This method cannot
exclude holidays (obviously), however there are many times that just the standard
business days is useful. I am sure there are other algorythms that could be used, however
this one has worked for me. The algorythm is described below in the comments of the
script.

/**********************************************************
*******/
/* An example of business days calculation in SQL
*/
/*
*/
/* The algorythm is:
*/
/*
*/
/* 1) Take the absolute difference between the dates
*/
/* to_date('&todate') - to_date('&frdate')
*/
/* 2) Subtract the weekends (number of weeks in the range
*/
/* TRUNC(to_date('&todate'),'D') = 1st day of week
that */
/* end of period is
in */
/* TRUNC(to_date('&frdate'),'D') = Last day of week
that */
/* start of period
is in */
/* So subtracting these two gives the number of days
*/
/* between the two dates but including all of the
days in */
/* the weeks that the dates start and end in. When
this */
/* number is divided by 7 it gives the number of
weeks. */
/* Multiplying by 2 gives the number of weekend days.
*/
/* 3) Subtract 1 day if the ending date is on a saturday
*/
/* DECODE(to_char(to_date('&todate'),'D'),7,-1,0)
*/
/* --> If the day of the week is saturday (7),
returns -1 */
/* 4) Subtract 1 day if the start date is on a sunday
*/
/* DECODE(to_char(to_date('&frdate'),'D'),1,-1)
*/
/* --> If the day of the week is sunday (1), returns
1 */
/* 5) Add one day to make the range inclusive (The '1 + '
) */
/*---------------------------------------------------------
------*/
/* Author: Kenneth Atkins ([email protected])
*/
/* http://www.olywa.net/katkins/oratip
*/
/**********************************************************
*******/
define frdate = '&1'
define todate = '&2'
set verify off
select
'&frdate' From_Date
,'&todate' To_Date,
1 + to_date('&todate') - to_date('&frdate') -
((TRUNC(to_date('&todate'),'D') -
TRUNC(to_date('&frdate'),'D'))/7)*2
+ DECODE(to_char(to_date('&todate'),'D'),7,-1,0)
+ DECODE(to_char(to_date('&frdate'),'D'),1,-1,0)
Business_Days
from dual
/

Here is an example of running the script:

SQL> @busdays 01-AUG-96 15-AUG-96

FROM_DATE TO_DATE BUSINESS_DAYS

--------- --------- -------------
01-AUG-96 15-AUG-96 11

1 row selected.

This same algorythm can also be put into a stored function:

CREATE OR REPLACE FUNCTION business_days(p_from_date IN

DATE, p_to_date IN DATE)
RETURN NUMBER IS
busdays NUMBER;
BEGIN
/**********************************************************
*******/
/* BUSINESS_DAYS - Database Function to Calculate number
of */
/* business days between two dates
*/
/*---------------------------------------------------------
------*/
/* Author: Kenneth Atkins ([email protected])
*/
/* http://www.olywa.net/katkins/oratip
*/
/**********************************************************
*******/

-- Get the absolute date range

busdays := TRUNC(p_to_date) - TRUNC(p_from_date)
-- Now subtract the weekends
-- this statement rounds the range to whole weeks
(using
-- TRUNC and determines the number of days in the
range.
-- then it divides by 7 to get the number of
weeks, and
-- multiplies by 2 to get the number of weekend
days.
- ((TRUNC(p_to_date,'D')-
TRUNC(to_date(p_from_date),'D'))/7)*2
-- Add one to make the range inclusive
+ 1;

/* Adjust for ending date on a saturday */

IF TO_CHAR(p_to_date,'D') = '7' THEN
busdays := busdays - 1;
END IF;

/* Adjust for starting date on a sunday */

IF TO_CHAR(p_from_date,'D') = '1' THEN
busdays := busdays - 1;
END IF;
RETURN(busdays);
END;
/
show errors;

Here is an example of calling this database function:

SQL> select business_days('01-AUG-96','15-AUG-96') from

dual;

BUSINESS_DAYS('01-AUG-96','15-AUG-96')
--------------------------------------
11

1 row selected.
Of course in a stored function, you could add code to substract holidays also. Perhaps
something like:
SELECT COUNT(*) INTO nHolidays
FROM Holiday_Table
WHERE holiday_date BETWEEN p_from_date AND p_to_date;
Then substract nHolidays from your business_days variable before returning.

Tip #3: Script to List PL/SQL Errors & Line Numbers (Type: PL/SQL)

When PL/SQL stored packages, procedures, or functions are loaded into the database and
compiled (using CREATE OR REPLACE) any syntax errors in the code can be listed
using the 'SHOW ERROR' command. However, many times these messages are cryptic,
and the line numbers specified do not correspond to the line number in the SQL file used
to load the code (because blank lines and comments before the 'CREATE' statement are
not loaded. For large procedures, this can be very frustrating. This hint will show how a
SQL script can be used to list the errors along with the actual source lines, indicating the
line with the error (with a '-->').

The Oracle views USER_SOURCE, and USER_ERRORS (or ALL_SOURCE and

ALL_ERRORS) can be used to list the source of the program the way the compiler sees it
(without blank lines and leading comments). USER_ERRORS is the view used by
SHOW ERRORS to display the errors for a PL/SQL program. The following select
statement will join these two views to list all of the compile errors, and point out
specifically which line the errors are on (using '-->').
/**********************************************************
*******************/
/* listerr.sql - Lists errors and source for errors for
PL/SQL programs. */
/*
*/
/* Parameter: &1 = The name of the PROCEDURE, PACKAGE,
or FUNCTION */
/*
*/
/* Author: Ken Atkins ([email protected])
*/
/* http://www.arrowsent.com/oratip
*/
/*
*/
/* This script uses the 'USER' views. It could easily
be modified to use */
/* the 'ALL' views by changing the 'user_' to 'all_' in
the view names */
/* and by adding an owner as another parameter
*/
/**********************************************************
*******************/
set verify off
define obj_name = '&1';
column outline format a105 heading 'Error Listing';
break on err_text skip 2;
set linesize 105;
set pagesize 0;
set pause off;
spool listerr
SELECT
decode(to_char(us.line), to_char(ue.line-7),ue.text,
to_char(ue.line-6),'',
to_char(ue.line+6),'',
to_char(ue.line) ,' --> '||
to_char(us.line,'99990')
||'
'||us.text
,' '||
to_char(us.line,'99990')
||'
'||us.text) outline
from user_source us, user_errors ue
where us.name = '&obj_name'
and us.line between (ue.line-7) and (ue.line+6)
and us.name = ue.name
and us.type = ue.type
-- This predicate is put here to elminate this useless
fallout error
and ue.text != 'PL/SQL: Statement ignored'
/
spool off
set pause on;
set pagesize 22;
Here is an example of using the script. A SQL script called 'hint3pck' has the definition of
a package with a few errors. The above SQL script is called 'listerr.sql':
CASE:KENNEA> @hint3pck

Package created.

No errors.

Warning: Package Body created with compilation errors.

Errors for PACKAGE BODY PACK_WITH_ERROR:

>
LINE/COL ERROR
--------
-----------------------------------------------------------
------
7/1 PL/SQL: Statement ignored
9/1 PLS-00201: identifier 'VVAR' must be declared
9/1 PL/SQL: Statement ignored
19/11 PLS-00201: identifier 'NO_DTA_FOUND' must be
declared

CASE:KENNEA> @listerr PACK_WITH_ERROR

PLS-00201: identifier 'VVAR' must be declared

4 vUSER VARCHAR2(30);
5 vTest VARCHAR2(30);
6 nTest NUMBER;
7 BEGIN
8 /* Comment line */
--> 9 vVar := to_num('12');
10 /* Comment line */
11 /* The next line has an error (missing
semicolon) */
12 nVar := 1;
13 /* more comments */
14 nVar := 3;

PLS-00201: identifier 'NO_DTA_FOUND' must be declared

14 nVar := 3;
15 BEGIN
16 SELECT user INTO vUSER
17 FROM dual;
18 EXCEPTION
--> 19 WHEN NO_DTA_FOUND THEN
20 NULL;
21 END;
22 BEGIN
23 SELECT user INTO vUSER
24 FROM dual;

28 rows selected.
The following select can also be used to just list the source for a stored procedure,
package or function, putting in the line numbers the compiler uses:
/**********************************************************
*******************/
/* listsource.sql - Lists source for PL/SQL programs.
*/
/*
*/
/* Parameter: &1 = The name of the PROCEDURE, PACKAGE,
or FUNCTION */
/*
*/
/* Author: Ken Atkins ([email protected])
*/
/* http://www.arrowsent.com/oratip
*/
/*
*/
/**********************************************************
*******************/
define obj_name = '&1';
column text format a74 heading 'Source Listing';
column line format 9999 heading 'Line';
set verify off
set linesize 80;
set pagesize 0;
set pause off;
spool &obj_name
SELECT
us.line, us.text
from user_source us
where us.name = '&obj_name'
order by type, line
/
spool off
set pause on;
set pagesize 22;

Tip #2: Determining Instance Name from SQL. (Type: SQL*Plus)

Sometimes it is useful to be able to get the name of the current instance from within
SQL*Plus or another development tool (such as Oracle*Forms or Oracle*Reports). Here
is a simple SQL statement that can be used to get the instance name. Also presented is an
example of using the SQL statement to set the SQL prompt to the instance name.

There is an internal oracle view called 'V$PARAMETER' which holds the values of
many parameters that the database uses. One of these parameters is called 'DB_NAME'.
This parameter holds the name of the database (kind of makes sense, doesn't it?). The
V$PARAMETER view looks like:
desc v$parameter

Name Null? Type

------------------------------- -------- ----
NUM NUMBER
NAME VARCHAR2(64)
TYPE NUMBER
VALUE VARCHAR2(512)
ISDEFAULT VARCHAR2(9)

The following SQL statement will return the database name from this view:
SELECT UPPER(value)
FROM V$Parameter
WHERE UPPER(name) = 'DB_NAME';

A SQL statement like this can be used to replace the standard sql prompt ('SQL>') with
the instance name. This can be useful if you are accessing many different instances in
SQL*Plus. It has saved me from messing up data in the wrong instance many times (like
deleting data from the production instance instead of test). Add the following SQL to
your login.sql file:
rem Create _DB_Name variable for general use.
set termout off
column upper(VALUE) new_value _DB_NAME;
select upper(value), from v$parameter
where upper(name) = 'DB_NAME';
rem
rem Put SGA Name in sql prompt
set SQLPROMPT '&_DB_NAME.> '
rem
rem If pause is on, say something when needed.
set pause '> '
rem
clear breaks
set termout on
set pause on
set feedback on
If the instance name is something like 'TESTINST' then the above SQL in the login.sql
file will change the prompt to:

TESTINST>

Ken Atkins' Oracle Database Tip of the week.

Tip #1: Conditional loading of PL/SQL code. (Type: PL/SQL)

Because of varying requirements in distributed databases or multi-organizational

companies, there is sometimes a need to impliment a PL/SQL package or procedure with
slight differences in the code when installed on separate instances or schemas. Quite
often this was done by maintaining a version of the code for each site. However, the
following technique can be used to keep all of the source in one file, and have the
differences implemented when the code is installed.
A SQL*Plus variable (& (ampersand) variable) can be dynamically loaded using the
'new_value' clause of the SQL*Plus column command. This variable can be dynamically
based upon the schema, or instance, or data in an existing table. These variables are
scanned and replaced in the SQL code before the code is installed or compiled. Therefore
the '&' variables can be used to change the code that is installed. Below is an example of
using this technique to 'comment out' a call to a procedure for one schema only:
set pause off
column comvar new_value comment_var
SELECT DECODE(user,'CWVND','--','') comvar
FROM DUAL
/
CREATE OR REPLACE PACKAGE test_package AS
PROCEDURE main;
PROCEDURE conditional_proc(parm1 IN VARCHAR2);
END test_package;
/
CREATE OR REPLACE PACKAGE BODY test_package AS
PROCEDURE main IS
BEGIN
DBMS_OUTPUT.PUT_LINE('Beginning of main
procedure.');
&comment_var conditional_proc('Test');
DBMS_OUTPUT.PUT_LINE('End of main procedure.');
END main;
PROCEDURE conditional_proc(parm1 IN VARCHAR2) IS
BEGIN
DBMS_OUTPUT.PUT_LINE('Conditional_proc called with
parm1='||parm1);
END conditional_proc;
END test_package;
/
If the above package is installed in the 'USER1' schema, then the 'conditional_proc'
procedure will be commented out, and therefore will not run. For all other schemas, the
procedure will NOT be commented out, and will run. Some other ways to use this
technique:

• Make the parameter to a procedure conditional. For example, the call to the
'conditional_proc' procedure above could be changed to:
• column userval new_value user_val;
• SELECT user userval FROM DUAL;
• .
• .
• conditional_proc('&user_val');
• Make the name of a procedure conditional. The following lines could be used to
call a procedure that is called _setup, where is the name of the oracle instance.
• column procname new_value proc_name;
• SELECT value||'_setup' procname
• FROM v$parameter
• WHERE upper(name) = 'DB_NAME';
• .
• .
• &proc_name;

Tip #57: Procedure to show all of an Oracle Portal

session variable's attributes (Type: Oracle on the Web)
Oracle When you are using Oracle Portal session variables, it is useful to be able to see
the values of it's attributes when you are testing and debugging an application that uses
them. This tip is a PL/SQL package that can be run from the browser to list all of a
session variable's attributes to the browser.

A PL/SQL Procedure to do the job

Here is a simple PL/SQL procedure that accepts the domain and sub-domain of the
Oracle Portal session and prints the names and values of all of the sessions attributes to
the browser.

CREATE OR REPLACE PROCEDURE show_session(p_domain IN

VARCHAR2, p_subdomain IN VARCHAR2) IS
/**********************************************************
******************************/
/* SHOW_SESSION - Shows the names and values of all of the
attributes of an Oracle */
/* Portal session variable.
*/
/*
*/
/* Parameters: p_domain = The name of
the session domain. */
/* p_subdomain = The name of
the session subdomain. */
/*
*/
/* Written by ken atkins ([email protected]). Copywrite
2001, all rights reserved. */
/* You may use this script for any purpose as long as you
do not include it in any */
/* commercial software for sale. If you make changes to
improve the script, please */
/* send them to me so I can make them available for other
users. */
/*
*/
/* Check out my oracle tip site at:
http://www.arrowset.com/oratips */
/*
*/
/* Vers Date By Change History
*/
/* ----- --------- ---------------
------------------------------------------------ */
/* 1.0 14-FEB-01 Ken Atkins Written.
*/
/**********************************************************
******************************/
v_session portal30.wwsto_api_session;
v_elements portal30.wwsto_session_elements;
v_num_attr INTEGER;
v_element portal30.wwsto_session_element;
BEGIN
v_session := wwsto_api_session.load_session(p_domain,
p_subdomain);
v_elements := v_session."_element_data";

v_num_attr := v_elements.count;
htp.p('Session attributes for:<BR><BR><TABLE
BORDER=0><TR><TD>DOMAIN:</TD><TD><B>'||
p_domain||'</B></TD></TR>');
htp.p('<TR><TD>SUB-DOMAIN:</TD><TD><B>'||
p_subdomain||'</B></TD></TR></TABLE>');
htp.br;
htp.p('Number of Attributes: '||to_char(v_num_attr));
htp.br;
htp.br;
htp.p('<TABLE BORDER="0">');
FOR i IN 1..v_num_attr LOOP
htp.p('<TR><TD>'||
v_elements(i).name||'</TD><TD>=</TD><TD>'||
v_elements(i).varchar2_data||'</TD></TR>');
END LOOP;
htp.p('</TABLE>');

END;
/
show errors
You can download the script by clicking here.
Installation

To install the procedure, do the following:

1. Install the procedure either in the PORTAL30 schema, or a schema that has access
to the PORTAL30 programs (for instance a provider schema).
2. Grant execute on the procedure to the portal30 public schema (usually
PORTAL30_PUBLIC). For instance:
3. GRANT EXECUTE ON show_session TO portal30_public;

Using the procedure

To use the procedure, simply open a separate navigator window (after you have run the
application which has set some session attributes), and type a call to the procedure into
the URL field. For example, the following URL will call the procedure on a local install
of portal30 with the standard dad:

http://localhost/pls/portal30/portal30.show_session?p_domain=CONTEX
T&p_subdomain=SESS_CRT

This call assumes the procedure is installed in the PORTAL30 schema. If it is installed in
another schema, replace the "portal30" immediately before "show_session" with the
name of the schema in which it is installed.

Replace "localhost/pls/portal30" with the appropriate dad-path for your installation.

The value for p_domain and p_subdomain are set to the domain and subdomain of the
session variable you want to see.

Here is an example of the output:

Summary: How do I implemen
Many form impleme
confusion and be an

This tip details how

Description:
For the complete tip

For more of Ken's O

Summary:
Description:

Summary:

Description:
Summary:

Description:

Summary:

Description:

Summary:

Description:

Summary:

Description:

Summary:

Description:
Summary:

Description:

Summary:

Description:
Summary:

Description:
Summary:
Description:

Summary:

Description:
Summary:

Description:

Summary:

Description:

Summary:
Description:
Summary:

Description:

Summary:
Description:
Summary:

Description:
Summary:

Description:

Summary:

Description:
Summary: How to determine the time and
There is information available
informatoin is not in a conveni
found it to be handier than look

SELECT TO_DATE(VALUE,
FROM V$INSTANCE
WHERE key = 'STARTUP

SELECT TRUNC(VALUE/(6
Description: time”
FROM V$INSTANCE
WHERE KEY = 'STARTUP

This information applies to ver

This will not work for Oracle 8

select to_char(startu
from v$instance
Summary: How do I load a large (more than 4K) H
To load a large HTML file into a varcha
the data into multiple rows before insert

Description: Then you would also need a program to

own. The other option is to use the LON
datatype. This can handle long data type
restrictions with the LONG datatype
How do I import data from an excel
Summary:
table?
Two ways I can think of to import d
into an Oracle table:

1. Use an ODBC connection from E

spreadsheet into table.

Description: 2. Export data from Excel spreadshe

to load the table from the flat file.

Either way is available, however, O

sql*net has to be set up on the pc. S
but it is usually faster to load an ent
rather than insert row by row via OD
Summary: Use NLS_UPPE
of case-insensiti
The NLS_UPPE
want to create a
your search que
the data could c
case.

To use:

create inde
(NLS_UPPER(

select * fr
NLS_UPPER(c
Description:
This is much fas

create inde
table_y(col

select * fr
upper(col_1

..because in the
already converte
and in the secon
conversion as it

Summary: 8.1.5 Export and it's parameters b

Description: I happened on a problem regardin
parameter files in 8.1.5. I have the
file:

userid=scott/tiger
rows=n
indexes=n
grants=n
file=temp_inside.dmp
tables=(user1.Table_x)

In 7.3.3 if I run the following stat

exp parfile=temp.par file=temp_o

the file written to is temp_outside

In 8.1.5 if I run the same statemen

temp_inside.dmp.

According to Oracle's 8.1.5 docum

'You can use a combination of the

options. That is, you can list param
parameters file and on the comma
can specify the same parameter in
position of the PARFILE paramet
parameters on the command line d
parameters override others. For ex
parameters file params.dat contain
INDEXES=Y and Export is invok
line:

exp system/manager PARFILE=p

INDEXES=N

In this case, because INDEXES=N

PARFILE=params.dat, INDEXES
value of the INDEXES parameter
Clearly this is not true. Beware of
How much "true" data is in a ta
Summary:
blocks?
Description: Need to know how much data i
table, I don't mean reserved spa
from dba_extents, I mean real a
in something useful like blocks

For v7.x DBs:

select count(distinct
substr(rowid,1,8)||substr(rowid,
from ;

For v8.x DBs:

select count(distinct
substr(rowid,10,6)||substr(rowid
from ;

Replace with your table name. T

will produce a total of blocks th
have been used by the data in th
table, simply multiply the figure
your block size to get the actual
figure.

Adjustment of
scripts following
Summary:
de-support of
svrmgrl.
Oracle has
announced future
desupport of
svrmgrl. You may
ask yourself, self,
how am I going to
adjust my scripts
to SQLPLUS and
include the
shutdown/startup
stuff.
Description: Use the following
command:

sqlplus
/nolog
SQL>connect
internal;
connected
SQL>shutdown
immediate;

Cool huh!

How can I write a message to the

Summary: ORACLE Alert log from a
PL/SQL program?
Description: Use the following pl/sql:

dbms_system.ksdwrt(2,'A line of
text');

Will write the text to the alert

log.

Use 1 instead of 2 to write to the

trace file

Use 3 to write to both.

Thanks to: Jonathan Lewis

Yet another Oracle-related web

site:
http://www.jlcomp.demon.co.uk

Summary:

Description:
Summary:

Description:

Summary:

Description:

Summary:

Description:
Summary:

Description:

Summary: Oracle8 installation creates a new account, tracesvr/trace, with SELECT A

The Oracle8 install has provided a very dangerous back door. It creates a
Trace. The new account is TRACESVR, and the default password is well-
Description: account is granted SELECT ANY TABLE.

This feature was discovered on a V8.0.6 install.

Summary: SQL Loader parameters when fields contain line feeds or carriage returns
Description: SQL Loader control files use line feed or CR to signify the end of the reco
entry of these characters (most commonly as part of a description or text f
encounters these line feeds, it assumes the end of the record and generates
To get around this:
1. when you generate the ascii file, put a field delimiter after each column
character as the delimiter.

2. in the SQL Loader control file, add the line:

continueif last !='|'

This will cause SQL Loader to correctly interpret data where line feeds or
CRs are a legitimate part of the data.
Summary: SQL Loader parameters when fields contain line feeds or carriage returns
SQL Loader control files use line feed or CR to signify the end of the reco
entry of these characters (most commonly as part of a description or text f
encounters these line feeds, it assumes the end of the record and generates

To get around this:

1. when you generate the ascii file, put a field delimiter after each column
Description: character as the delimiter.

2. in the SQL Loader control file, add the line:

continueif last !='|'

This will cause SQL Loader to correctly interpret data where line feeds or
CRs are a legitimate part of the data.
Summary: Stored procedure to recompile schema
Description: EXEC DBMS_UTILITY.COMPILE_SCHEMA( 'schema-name' );

All in One DBA Scripts PDF
No ratings yet
All in One DBA Scripts PDF
85 pages
120 Advanced JavaScript Interview Questions
From Everand
120 Advanced JavaScript Interview Questions
Hernando Abella
No ratings yet
OrcafAPI Manual
No ratings yet
OrcafAPI Manual
39 pages
Automatic Post Data Acquisition Data Analysis by MassHunter Quantitative Analysis Software and Report Printing
No ratings yet
Automatic Post Data Acquisition Data Analysis by MassHunter Quantitative Analysis Software and Report Printing
11 pages
Activate MS Office 2013 Without Any Software Using CMD
100% (2)
Activate MS Office 2013 Without Any Software Using CMD
6 pages
Check List (DBA Checklist (Activities of Oracle DBA) )
No ratings yet
Check List (DBA Checklist (Activities of Oracle DBA) )
17 pages
DBA Solved All
57% (7)
DBA Solved All
22 pages
SCP270 UserGuide
No ratings yet
SCP270 UserGuide
129 pages
All Dos Commands
100% (4)
All Dos Commands
5 pages
NIST's Integrated Colony Enumerator (NICE)
100% (1)
NIST's Integrated Colony Enumerator (NICE)
23 pages
Lab 5 - Batch Files
No ratings yet
Lab 5 - Batch Files
10 pages
FAPT Ladder For PC-Operator Manual
0% (1)
FAPT Ladder For PC-Operator Manual
302 pages
Oracle 19c Database Administrator
50% (4)
Oracle 19c Database Administrator
11 pages
Oracle DBA Interview PERFORMANCE TUNING Question-1
No ratings yet
Oracle DBA Interview PERFORMANCE TUNING Question-1
7 pages
Case Study Oracle
No ratings yet
Case Study Oracle
30 pages
Int Questions For DB New
No ratings yet
Int Questions For DB New
7 pages
Interview FAQ PDF
No ratings yet
Interview FAQ PDF
36 pages
Oracle 10g SQL
100% (6)
Oracle 10g SQL
19 pages
How To Remove Duplicate Rows Without Using DISTINCT or ROWID or GROUP by Methods in Oracle
0% (1)
How To Remove Duplicate Rows Without Using DISTINCT or ROWID or GROUP by Methods in Oracle
36 pages
Oracle DBA Faq's
No ratings yet
Oracle DBA Faq's
67 pages
Informatica Scenario Based
100% (1)
Informatica Scenario Based
366 pages
Oracle Frequently Asked Questions
No ratings yet
Oracle Frequently Asked Questions
151 pages
Oracle Frequently Asked Questions
100% (1)
Oracle Frequently Asked Questions
151 pages
DBA Interview Questions With Answers Part8
No ratings yet
DBA Interview Questions With Answers Part8
13 pages
Oracle (1) Database 10g Administration Workshop I
No ratings yet
Oracle (1) Database 10g Administration Workshop I
5 pages
ORACLE DBA Interview Preparation & Guidence To Basic Concepts
100% (1)
ORACLE DBA Interview Preparation & Guidence To Basic Concepts
49 pages
Y Ca CH E: Shared/ SQL Area Fetching by Server Process Keep Pool
No ratings yet
Y Ca CH E: Shared/ SQL Area Fetching by Server Process Keep Pool
36 pages
DBT Notes
No ratings yet
DBT Notes
66 pages
Oracle Database Administration: How Does One Create A New Database?
No ratings yet
Oracle Database Administration: How Does One Create A New Database?
45 pages
Oracle Interview
No ratings yet
Oracle Interview
13 pages
DBA in 60 Days
No ratings yet
DBA in 60 Days
8 pages
1 Oracle Database Administration: Overview
No ratings yet
1 Oracle Database Administration: Overview
5 pages
Real Time Scenario
100% (3)
Real Time Scenario
206 pages
Oracle Backup Recovery
No ratings yet
Oracle Backup Recovery
18 pages
Scripts
No ratings yet
Scripts
6 pages
Scripts: Appendix
No ratings yet
Scripts: Appendix
6 pages
Oracle Database PDF
No ratings yet
Oracle Database PDF
104 pages
Oracle Interview Questions
100% (1)
Oracle Interview Questions
87 pages
Oracle Interview Questions and Answers
100% (2)
Oracle Interview Questions and Answers
23 pages
Oracle 1
No ratings yet
Oracle 1
133 pages
Oracle Interview Questions Basic
No ratings yet
Oracle Interview Questions Basic
26 pages
Beginners SQL Plus
No ratings yet
Beginners SQL Plus
14 pages
Orcloper 1
No ratings yet
Orcloper 1
61 pages
SQL For Dbas: Developers and Users Will Learn Something As Well!
No ratings yet
SQL For Dbas: Developers and Users Will Learn Something As Well!
61 pages
Oracle Programming With Visual Basic
No ratings yet
Oracle Programming With Visual Basic
721 pages
Oracle Database 10g New Features
No ratings yet
Oracle Database 10g New Features
35 pages
Oracle DBA Interview Questions and Answers From GeekInterview
No ratings yet
Oracle DBA Interview Questions and Answers From GeekInterview
3 pages
DBA Questions
No ratings yet
DBA Questions
34 pages
Interview Questions - Oracle FAQ
No ratings yet
Interview Questions - Oracle FAQ
29 pages
Look It Up! - Oracle Data Dictionary
No ratings yet
Look It Up! - Oracle Data Dictionary
5 pages
Oracle Technical
100% (1)
Oracle Technical
7 pages
SQL 00
No ratings yet
SQL 00
19 pages
Oracle Tips and Tricks
No ratings yet
Oracle Tips and Tricks
28 pages
Oracle Ask Tom
No ratings yet
Oracle Ask Tom
40 pages
DRBD-Cookbook: How to create your own cluster solution, without SAN or NAS!
From Everand
DRBD-Cookbook: How to create your own cluster solution, without SAN or NAS!
Joerg Christian Seubert
No ratings yet
50 Recipes for Programming Node.js
From Everand
50 Recipes for Programming Node.js
Jamie Munro
3/5 (4)
Profound Python Data Science
From Everand
Profound Python Data Science
Onder Teker
No ratings yet
Quick Configuration of Openldap and Kerberos in Linux and Authenicating Linux to Active Directory
From Everand
Quick Configuration of Openldap and Kerberos in Linux and Authenicating Linux to Active Directory
Dr. Hidaia Mahmood Alassouli
No ratings yet
DBMS Lab Manual
From Everand
DBMS Lab Manual
Jitendra Patel
1.5/5 (3)
Practical Reverse Engineering: x86, x64, ARM, Windows Kernel, Reversing Tools, and Obfuscation
From Everand
Practical Reverse Engineering: x86, x64, ARM, Windows Kernel, Reversing Tools, and Obfuscation
Bruce Dang
No ratings yet
CISCO PACKET TRACER LABS: Best practice of configuring or troubleshooting Network
From Everand
CISCO PACKET TRACER LABS: Best practice of configuring or troubleshooting Network
Mulayam Singh
No ratings yet
Learn Cassandra in 24 Hours
From Everand
Learn Cassandra in 24 Hours
Alex Nordeen
No ratings yet
Interview Questions for IBM Mainframe Developers
From Everand
Interview Questions for IBM Mainframe Developers
Robert Wingate
1/5 (1)
The Mac Terminal Reference and Scripting Primer
From Everand
The Mac Terminal Reference and Scripting Primer
Jay Docherty
4.5/5 (3)
Linux Services Deployment
From Everand
Linux Services Deployment
Fabian Mestre
No ratings yet
JAVA PROGRAMMING FOR BEGINNERS: Master Java Fundamentals and Build Your Own Applications (2023 Crash Course)
From Everand
JAVA PROGRAMMING FOR BEGINNERS: Master Java Fundamentals and Build Your Own Applications (2023 Crash Course)
Theo Houle
No ratings yet
Basic DBA Query v.1: Oracle Database
From Everand
Basic DBA Query v.1: Oracle Database
Oraclesql-plsql
5/5 (1)
Java for Black Jack: Learn the Java Programming Language in One Session by Writing and Running a Java-Based Card Game Simulation
From Everand
Java for Black Jack: Learn the Java Programming Language in One Session by Writing and Running a Java-Based Card Game Simulation
U.Q. Magnusson
No ratings yet
AIM Handbook
No ratings yet
AIM Handbook
356 pages
Oracle9i New Features
No ratings yet
Oracle9i New Features
94 pages
Upgasst
No ratings yet
Upgasst
20 pages
R11i Doc
No ratings yet
R11i Doc
6 pages
PROCEDURE Name ( (Parameter (, Parameter, ... ) ) ) IS (Local Declarations) Begin Executable Statements (Exception Exception Handlers) END (Name)
100% (1)
PROCEDURE Name ( (Parameter (, Parameter, ... ) ) ) IS (Local Declarations) Begin Executable Statements (Exception Exception Handlers) END (Name)
34 pages
Supplied Package
No ratings yet
Supplied Package
10 pages
PLSQL Chapter
No ratings yet
PLSQL Chapter
26 pages
Oracle8i Admin Guide
No ratings yet
Oracle8i Admin Guide
556 pages
9ib SEC
No ratings yet
9ib SEC
56 pages
Using Procedures and Packages
No ratings yet
Using Procedures and Packages
45 pages
9ib TEXT
No ratings yet
9ib TEXT
41 pages
Procedure Builder
No ratings yet
Procedure Builder
17 pages
9ib WSPC
No ratings yet
9ib WSPC
44 pages
What Is A Package?
No ratings yet
What Is A Package?
45 pages
9ib XML
100% (1)
9ib XML
51 pages
9ib REPL
No ratings yet
9ib REPL
72 pages
9ib SCALE
No ratings yet
9ib SCALE
66 pages
Installation and Configuration
No ratings yet
Installation and Configuration
104 pages
9ib OBJ
No ratings yet
9ib OBJ
96 pages
9ib JAVA
No ratings yet
9ib JAVA
62 pages
9ib MANAG
No ratings yet
9ib MANAG
168 pages
9ib IPLUS
No ratings yet
9ib IPLUS
16 pages
9ib HADR
No ratings yet
9ib HADR
179 pages
9ib DNSRV
No ratings yet
9ib DNSRV
51 pages
9ib ISRCH
No ratings yet
9ib ISRCH
71 pages
9ib EXT
No ratings yet
9ib EXT
68 pages
GCLC Notice
No ratings yet
GCLC Notice
36 pages
Iboot Control v050302w
No ratings yet
Iboot Control v050302w
3 pages
SQL Workbench Manual
No ratings yet
SQL Workbench Manual
164 pages
XFH 9
No ratings yet
XFH 9
33 pages
Install Guide PDF
No ratings yet
Install Guide PDF
100 pages
Wordstar Professional Release 5 Printer Information PDF
No ratings yet
Wordstar Professional Release 5 Printer Information PDF
22 pages
Sound Forge
No ratings yet
Sound Forge
102 pages
STD SAP Pgms Useful
No ratings yet
STD SAP Pgms Useful
19 pages
Lecture 24 Ground Heat Transfer
No ratings yet
Lecture 24 Ground Heat Transfer
28 pages
Windows 7 - Auto-Mount VHDs at Startup - Martin W. Angler
No ratings yet
Windows 7 - Auto-Mount VHDs at Startup - Martin W. Angler
13 pages
Atpdraw As User Shell For Atp Simulations
No ratings yet
Atpdraw As User Shell For Atp Simulations
20 pages
How To Prevent Batch Window From Closing When Error Occurs - Stack Overflow
No ratings yet
How To Prevent Batch Window From Closing When Error Occurs - Stack Overflow
2 pages
Running SAS in Batch Mode in Windows OS
No ratings yet
Running SAS in Batch Mode in Windows OS
9 pages
Start A Program - WinCMD
No ratings yet
Start A Program - WinCMD
4 pages
Conefor Inputs: Installation
No ratings yet
Conefor Inputs: Installation
16 pages
Honey Well Spyder User Guide
No ratings yet
Honey Well Spyder User Guide
240 pages
Argent Scheduler
No ratings yet
Argent Scheduler
278 pages
Microsoft Windows 98 Second Edition README For Tips and Tricks, April 1999
No ratings yet
Microsoft Windows 98 Second Edition README For Tips and Tricks, April 1999
8 pages
AdvancedInstallationAndConfigurationManual en
No ratings yet
AdvancedInstallationAndConfigurationManual en
87 pages
PhreePlot (026 109)
No ratings yet
PhreePlot (026 109)
84 pages
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12
No ratings yet
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12
8 pages
Quick Start Lotos 12
No ratings yet
Quick Start Lotos 12
15 pages