Readme ljM601 602 603 fs3

LASERJET ENTERPRISE M601/M602/M603 PRINTER SERIES Firmware
Readme
Product Name(s): HP LaserJet M601n • HP LaserJet M601dn

Model Number(s): CE989A, CE990A
Product Name(s): HP LaserJet M602n • HP LaserJet M602dn • HP LaserJet M602x
Model Number(s): CE991A, CE992A, CE993A
Product Name(s): HP LaserJet M603n • HP LaserJet M603dn • HP LaserJet M603xh
Model Number(s): CE994A, CE995A, CE996A
This document contains information for the firmware revision number:

Firmware Datecode: 20220214
Firmware Revision: 2309059_000599
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 3.9.9
Description
What is included in the Firmware bundle?
Who needs this firmware?
Determining the current version level of your firmware
Enhancements and Fixes provided with this firmware revision

Enhancements and Fixes provided with the previous revision/s
Installation Instructions
Additional Information to know
-- Using the Embedded Web Server
-- Using the Walk up USB port
-- Web Jetadmin
FutureSmart Level Switching Procedures

-- Embedded Web Server (EWS)
-- Device Control Panel
-- Web JetAdmin
System Requirements
Technical Assistance
Customer Support
Internet
Additional Information
Legal Statements
-- Trademark Notices
-- OPEN-SOURCE SOFTWARE LICENSE AGREEMENTS (In English)
-- License and Copyright
Description
This Readme file provides specific installation instructions and other information you
should know before you perform a firmware update for your HP LaserJet Series printer or
MFP. Installation instructions are provided for Single and Multiple Printer Updates.
This document provides specific update, installation and troubleshooting information. For
additional information on the device features, refer to the online user guide found on the
Windows Printing System Installer CD-ROM that came with your printer or at hp.com.
What is included in a Firmware bundle?

The HP LaserJet printer firmware update file available from the hp web site contains
firmware for the printer, embedded JetDirect (if applicable), HP paper handling
accessories used with the device in one convenient download file. When the Remote
Firmware Upgrade file is sent to the HP LaserJet Printer or MFP firmware for the engine
and all connected accessories are upgraded.
Who needs this firmware?

Similar to Hewlett Packard providing improved software for your HP LaserJet Printer or
MFP, Hewlett Packard provides firmware updates for your printer periodically through its
supported lifecycle. A firmware update may be necessary if it is determined that you may
benefit from the resolution of any issue that is documented below. These updates are
available on the HP support web site.
Determining the current version level of your firmware
To determine the current level of firmware installed on the device:

Go to the printer’s or MFP’s control panel.
1. Go to the printer’s control panel.
2. Press the Home or OK button.
3. Scroll down to the Administration menu and press OK.
4. On the Reports menu press the OK button.
5. On the Configuration/Status Pages menu press OK.
6. Scroll down to the Configuration page option and press OK.
7. Scroll back up to the top to the Print option and press OK.
On the printed Configuration page look in the section marked "Device Information" for the
Firmware Datecode and Firmware Revision. The Firmware Datecode and Firmware
Revision will look something like this:

IMPORTANT NOTE:
This firmware file requires an interactive update method. You CANNOT update these
Product(s)/Model(s) using the traditional FTP, LPR or Port 9100 methods of upgrading.
Please use one of the following methods listed below to update the firmware of this
device.
Enhancements and Fixes provided with this Firmware

revision
The following new functionality or features are provided by this firmware release:
For information on HP Security Bulletins addressed by firmware releases, please

visit: https://support.hp.com/security-bulletins
To initiate a subscription to receive future HP Security Bulletin alerts via email,
visit: https://www.hp.com/go/alerts
ENHANCEMENT:
Base:
➢ No new updates
Security/Authentication:
➢ No new updates
Embedded JetDirect:
➢ No new updates
FIXES:
Base:
➢ Updated the JQuery version.
➢ No new updates
Embedded JetDirect:
➢ Updated the network stack.
Current firmware revisions included in this firmware bundle:
DEVICE FIRMWARE REVISION

COMPONENT FIRMWARE VERSION
Firmware Datecode 20220214
Firmware Revision 2309059_000599
Embedded JetDirect JDI23900050
DC Controller Version 5.121
HP Fleet Release Designation FutureSmart 3.9.9
MD5 checksum for .bdl file 5fb52366eac6ff04143956febb94a2d3
Enhancements and Fixes provided with this Firmware revision
The following new functionality or fixes are FutureSmart Level 3 only features and are
provided by this firmware release:
For information on HP Security Bulletins addressed by firmware releases, please visit:

https://support.hp.com/security-bulletins
To initiate a subscription to receive future HP Security Bulletin alerts via email, visit:
https://www.hp.com/go/alerts
ENHANCEMENTS:
Base:
➢ No New Updates.
➢ No New Updates.
Embedded JetDirect:
➢ No New Updates.
FIXES:
Base:
➢ No New Updates
➢ The Microsoft KB5004238 update will cause all smartcard authentications to fail.
Embedded JetDirect:
➢ No New Updates
The following new functionality or fixes are FutureSmart Level 2 and 3 features and are
ENHANCEMENTS:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates

HP LJ Enterprise M600 Series
Embedded JetDirect: JDI23900047
DC Controller: 5.121
Optional Tray Version 3.100
Duplex Unit Version 2.101
HP Fleet Release Designation FutureSmart Bundle Version 3.9.8
MD5 checksum for .bdl file b1c974cd6c342960a2ad5ccc1816d6f4

ENHANCEMENTS:
Base:
➢ No New Updates.
➢ No New Updates.
Embedded JetDirect:
➢ No New Updates.
FIXES:
Base:
➢ HP Webservices will stop working and the printer will lose its connection to HP
Connected on the web. You may see an error "Could not communicate with HP
Connected, or Unable to contact HP Connected" when you try to enable HP Web
Services.
➢ Third party solutions created in 2021 will not be able to load on the device
through the solution installer page.
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENTS:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates

MD5 checksum for .bdl file 13f1a44cfbb0115996bb42e5a75fb2b9

ENHANCEMENTS:
Base:
➢ No New Updates.
➢ No New Updates.
Embedded JetDirect:
➢ No New Updates.
FIXES:
Base:
➢ 49.4A.04 error may occur intermittently when printing from certain types of
customized applications.
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENTS:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates

MD5 checksum for .bdl file 89a27d8aed4447e05b6e02be1db77701
ENHANCEMENTS:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENTS:
Base:
➢ No New Updates
➢ Added an updated digital signature verification for aftermarket solution bundles
during installation. Currently installed solutions are not affected. Customers and
resellers should work with solution providers for an updated signature-compliant
version of their software.
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ Some SmartCard solutions may fail to communicate with the card reader properly
causing the authentication dialog window to not appear.
➢ CVE-2019-6334 - Solution application signature checking may allow potential

execution of arbitrary code.
Embedded JetDirect:
➢ No New Updates

MD5 checksum for .bdl file 7d04a0f120329fe2f1943ad025878887
ENHANCEMENTS:
➢ New security check will prevent installation of non-compliant aftermarket solution

bundles. Currently installed solutions are unaffected. Please work with solution
providers for an updated signature-compliant version of their software.
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENTS:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ TLS 1.0 and Multicast IPV4 settings do not get backed up and restored properly.

MD5 checksum for .bdl file cf63211e7354912736503fb724ffcb3b
ENHANCEMENTS:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENTS:
Base:
➢ No New Updates
➢ Added a feature to prevent Cross-site Request Forgery (CSRF) exploits. This guards
against a malicious exploit where unauthorized commands are sent to the EWS
using the logged-on administrator credentials.
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ Under certain conditions 49.38.07 error is seen after receiving a fax job.
➢ Secure Erase feature does not work properly after replacing the device’s Hard Disk
Drive (HDD).
➢ CVE-2018-5923 : Insecure Solution DLL Signature Validation.

➢ CVE-2015-9251 : jQuery before version 1.12.0 and 3.0.0 may be vulnerable to
Cross-site Scripting (XSS) attacks
Embedded JetDirect:
➢ Cisco "ARP Proxy" feature is causing devices to decline the DHCP offer.
➢ Syslog Priority setting is not filtering properly.
➢ Device loses network connection after re-negotiating the link speed.

MD5 checksum for .bdl file 8ccc99937c79d3b0aefc4c8b96d6a30b
ENHANCEMENTS:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ When printing from Mac OS High Sierra, error "undefinedresult, OFFENDING

COMMAND" is seen.
➢ Unable to print certain PDF files from USB.
➢ No New Updates
Embedded JetDirect:
➢ By default, the IPP queue was disabled and it was enabled only for CUPS client.
This change includes enabling IPP queue by default, which improves IPP/IPPS
performance significantly.
ENHANCEMENTS:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ No New Updates
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates

MD5 checksum for .bdl file 841d80e3a3a99a434c86186b2beae647
HP Fleet Bundle Version Designation: FutureSmart Bundle Version 3.9
ENHANCEMENTS:
Base:
➢ The Backup and Restore feature has been expanded to include JDI settings.
Additionally, this feature has been expanded to allow creating a backup file and
restoring that file to another device of the same model and firmware version as the
backup file.
➢ Added support for "Any Size/Any Type" in cassette trays.
➢ This feature increases the number of allowed PIN users in the device's local
address book; from 1000 to 2000.
➢ Optimized JPEG decompression library improves performance of print jobs with
JPEG compressed images
➢ A new option has been added to delete the temporary jobs after 3 days.
➢ Error code “42.B0.01” will not be displayed in the event log for end customers.
➢ Added new feature to allow PCL 6 to suppress blank pages. Previously this feature
was only available with PCL5, now this functionality is also available with PCL6.
➢ Changes in power management to meet new Blue Angel regulations.
➢ Users now have the ability to disable printing from Help.

➢ Added two new features to improve the private and usability of retrieving stored
jobs from the "Retrieve from Device Memory" application. Administrators can
define what users first see when entering the "Retrieve from Device Memory"
application. The default behavior has not changed, but administrators have a new
setting in the embedded web server under "Security" [Tab] -> "Protect Stored
Data" [Menu] -> "Managed Stored Jobs" [Section] called "Behavior when users
are authenticated. If "Assist users to their jobs" is selected, users entering the
application will immediately see their jobs provided a folder exists by their
username (default behavior in the print driver when sending jobs) but can navigate
back to the list of folders with jobs. Administrators will also note a new permission
that is not activated by default in the embedded web server under "Security" [Tab]
-> "Access Control" [Menu] -> "Sign In and Permission Policies" [Section] ->
"Open from Device Memory application" [Control Panel Permission] for "Other
Users' Jobs and Folders". If removing the permissions (e.g. for "Guest" and
"Device User") a regular user will only be able to see their or guest jobs. If at the
folder view they will only be able to see folders with at least one of their own jobs
or a guest job within it except for the special folders like "Untitled" & "Stored
Faxes". These two features can be used together to optimize the privacy &
usability when users retrieve their stored jobs.
➢ Allow for nested group behavior on the EWS: Security>Access Control>Windows
Setup. Nested AD groups may be configured to inherit parent permissions.
➢ Allows for authentication at devices using AD credentials instead of local device
credentials via Web Jet admin.
➢ This firmware provides compatible HP and 3rd party solution software the ability
to establish HTTPs communications through the Jetdirect networking interface. The
protocol and encryption parameters for these solutions are now configured using
the Jetdirect networking settings, allowing access to updated Jetdirect protocols
and encryption. This option is available to HP and 3rd party solutions using the
HttpWebRequest Class connection methods.
➢ This firmware addresses the following security issues: CVE-2005-4900– SHA-1 is
not collision resistant, allowing for context-dependent spoofing attacks. Cipher
suites containing the SHA-1 hashing algorithm can now be disabled by setting
Encryption Strength to “High” within the “Mgmt. Protocols” page under the EWS
Networking tab. These cipher suites will remain enabled/active if Encryption
Strength is set to either “Medium” or “Low”. Note: For devices with Encryption
Strength set to “High”, after installing this firmware the Encryption Strength setting
will be changed to “Medium” to allow continued access to SHA-1 cipher suites.
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ You may see a 49.00.FF error while performing a Direct TIFF print job.
➢ Setting Legacy resolution to 300 x 300 would not be retained after a power cycle.
➢ Print job size of 400mb or more not getting stored on the device disk memory.
➢ Disk resident fonts are not persistent after a power cycle.
➢ Paper type is displayed incorrectly on control panel when using Chinese.
➢ Wrong translation of control panel buttons in Czech.
➢ Certain PDFs were not printed correctly, text on PDF was getting printed as blocks.
➢ Improved Barcode scanning.
➢ Improvement in print performance of certain PDF files.
➢ You may see an Access Denied warning when trying to accesses the EWS even
prior to entering in a Password.
➢ Under certain circumstances an SNMP GET request might receive a slow response
which exceeds all client retries and timeouts. Sometimes the printer would never
respond. This fix ensures that these circumstances do not prevent timely SNMP
responses.
➢ Intermixing of pages is seen when printing mopy jobs.
➢ Embedded EPrint setting intermittently shows state as "Not Supported" instead of
"Enabled/Disabled" via WJA.
➢ Using the Pages per Sheet N-Up printing feature provided with any version of the
UPD PCL6 driver will give incorrect printed output.
➢ You may see improvements printing certain fonts.
➢ 49.38.07 error is seen when printing certain jobs with "reverse page order"
setting enabled on a device without finisher.
➢ PS Error seen when printing certain documents greater than 40 pages.
➢ Added a Web Service object for the "Security" -> "Web Scan Auto Capture Jobs:
Enable Remote User Auto Capture" feature which will allow Web Jet admin to fleet
manage this setting with XTP Tickets where reservation less scanning for Network
TWAIN is required.
➢ 49.4A.04 is seen when printing certain PDF files containing excessive numbers of
XObjects on one or more pages
➢ Error 49.4A.04 is seen when reprinting certain jobs from Corel Draw.
➢ The PCL commands to call barcode fonts does not work when using asterisks
➢ 49.38.07 error is seen when printing certain PDF jobs in duplex.
➢ Color mismatch while printing certain PDF documents and selecting the CMYK
profile in driver.
➢ Device stops responding to SNMP requests when we go to Device tab in WJA.
➢ USB volume name is not getting displayed correctly in Korean and other 2 byte
languages.
➢ Missing graphics on pages when printing certain PCL5 jobs.
➢ Improvements in small job print performance.
➢ Display brightness value is getting reset to default on a power cycle.
➢ Resolved issue where aftermarket authentication agents utilizing the OXPd protocol
could inadvertently remove guest permissions to tabs (e.g. the Information tab) on
the EWS page.
➢ "This firmware addresses the following security issue:
➢ CVE-2016-2183 – 3DES TLS/SSL Birthday Attacks on 64-bit Block Ciphers
(SWEET32) Vulnerability."
➢ Re-added web services (removed in FS 3.8) to allow HP Jet Advantage Security
Manager to manage the state of the Information tab in the embedded web server.
➢ Resolved redundant authentication prompts when accessing certain types of logs.
➢ This firmware addresses the following security issue: CVE-2017-2750 - Insecure
Solution DLL Signature Validation.
➢ Added support for G&D FIPS-201 SIPR smartcards that are provisioned without
encipherment certificates.
➢ When logging into the Embedded Web Server using Windows authentication, you
may not be able to see all the tabs or options that you have been granted access
to.
➢ This firmware addresses the following security issues:
CVE-2017-13077: Reinstallation of the pairwise encryption key (PTK-TK) in the 4-
way handshake. CVE-2017-13078: Reinstallation of the group key (GTK) in the 4-
way handshake. CVE-2017-13079: Reinstallation of the integrity group key (IGTK)
in the 4-way handshake. CVE-2017-13080: Reinstallation of the group key (GTK)
in the group key handshake. CVE-2017-13081: Reinstallation of the integrity
group key (IGTK) in the group key handshake.
➢ This firmware disables the "TFTP Configuration File" setting to prevent
unauthorized device resets.
Embedded JetDirect:
➢ Fixed "IP Address/Subnet is out of range. Check the field. IP=x.x.x.x

Mask=x.x.x.x" error given when an IP address was entered with zero for the host
number in the Access Control List.
➢ Buffers expanded to hold large DNS responses (70+ records). Previously only
about 7 or 8 records were accepted.
➢ Trying to connect via the FTP may fail with certain applications.
➢ Fixed an issue where Windows Authentication would hang the printer.
➢ Product was generating Certificate Signing Requests with version number other
than zero. RFC 2986 requires a version number of zero.
➢ Product was generating Certificate Signing Requests with version number other
than zero. RFC 2986 requires a version number of zero.
➢ Printer crashes with 81.09.00 Embedded Jetdirect Error message when user sets
Admin password from Telnet.
➢ Under certain circumstances during initial power-on, the DCHP Discover message
is sent without a hostname (option 81). This fix ensures that option 81 is always
present when applicable.
➢ The password input for "Import Certificate and Private Key" has been expanded
beyond 16 characters.
➢ Default name when saving a CSR (Certificate Signing Request) is no longer
"certificate.cer".
➢ Under certain circumstances the certificate validity check performed during the IKE
portion of IPsec was done with the local printer time and not UTC time.
➢ If a Jetdirect 2900w in installed and two different wired networks are connected to
the printer (one on the JD 2900w and one on the Jetdirect Inside connection), then
it was possible (under certain circumstances) for the entire printer to become
unresponsive.
➢ This fix prevents the printer from resetting the connection during an intervention
event (paper out, paper jam, etc.) when printing using the LPD protocol.
Previously, the connection would be reset after the TCP Idle Timeout had expired.
Now it will wait indefinitely.
➢ The firmware had trouble parsing a long list of "additional records" in a DNS SRV
response packet. This fix prevents the problems which were causing the device to
crash with a 49.38.07 error code.
➢ Do not respond to pings during the DHCP process (after DHCP Discover).
➢ Retry 802.1x EAP Start process if unsolicited Request Identity is received after
connecting to unsecured network.
➢ IPP attribute "printer state" is not returning the correct state when printing a port
9100 job.
➢ Updates to HTTPS communications for embedded aftermarket solutions.
➢ Some SSL requests from embedded solutions would fail due to corruption of the
destination URL.
➢ Printer is showing offline after registering to Google Cloud Print.

HP Fleet Release Designation FutureSmart Bundle Version 3.9
MD5 checksum for .bdl file 35520735c5ecefa4375d172cdb16317c

HP Fleet Bundle Version Designation: FutureSmart Bundle Version 3.8.0.3
ENHANCEMENTS:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENTS:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ No New Updates
➢ This firmware addresses the following security issues: CVE-2017-11103 - Heimdal

before 7.4 allows remote attackers to impersonate services with Orpheus' Lyre
attacks.
➢ This firmware addresses the following security issues: CVE-2017-9765 - Integer

overflow in SOAP (Simple Object Access Protocol) function allows execution of
arbitrary code or Denial of Service, aka Devil’s Ivy attack.
Embedded JetDirect:
➢ No New Updates

Embedded JetDirect: JDI23e80129
HP Fleet Release Designation FutureSmart Bundle Version 3.8.0.3

ENHANCEMENTS:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENTS:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ No New Updates
➢ This firmware addresses the following security issue: CVE-2017-2743 - Cross Site
Scripting (XSS) Vulnerability.
Embedded JetDirect:
➢ No New Updates

HP Fleet Release Designation FutureSmart Bundle Version 3.8.0.2
ENHANCEMENTS:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENTS:
Base:
➢ Introduced a secure pull print job purge feature where when using a pull print
solution and there is a condition on the device that requires user intervention, a job
purge mode will be tied to the inactivity timeout. Job purge is limited to up to 3
jobs in the current print queue. To enable, select "Cancel Print Jobs after
Unattended Error" in the devices EWS Security - General tab.
➢ If the paper tray is set to "Any" size, when the tray guides are adjusted the "Any"
size setting will be retained.
➢ Upgraded the font library to UFST 7.3.1. The focus areas are Error handling for
TrueType fonts and OpenType CFF fonts.
➢ Mediatype "HP EcoSMARTLite" has been renamed to "HP EcoFFICIENT".
➢ Role-Based Access to EWS - provides ability to limit access to EWS items via
defined roles. Note: If configured using 3.7.4, feature changes in next fleet release
may cause some access controls to be lost. See white paper for details.
➢ Added functionality to allow users to cancel A3 jobs on A4 printers, mainly
targeted for Pull printing customers.
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ You may see devices intermittently stop responding in complex print environments
➢ Resolves an issue where HP device with PaperCut solutions may result in users
being unable to Authenticate or Pull Print. Within the PaperCut Administration
Console the HP device is unable to be configured or the embedded device status
reports the following error “Error: The server sent HTTP status code 400:
BadRequest”.
➢ EPrint error "Could not communicate with HPConnected.com. Some internal error
happened, try again." is seen after upgrading firmware to FS 3.5.1 or later
versions.
➢ A 49.38.07 error may be seen when printing PDF files using LPR.
➢ Improvement in print performance while printing certain PDFs using PS driver.
➢ PCLXL error is seen while printing PDFs with watermark.
➢ When PJL JOB START specifies a specific page to begin printing on (e.g. PAGE
20), the device correctly begins printing on the specified page. However,
unsolicited PJL USTATUS PAGE responses would begin counting from Page 1
(Page 2 when printing duplex) instead of the specified JOB START page (e.g.
PAGE 20). This has been corrected so PJL USTATUS returns PAGE counts
beginning at the specific START PAGE.
➢ An indication that direct Tiff printing was supported with the Retrieve from USB
feature was missing from control panel screen seen after opening the application
on the control panel.
➢ Not able to change Tray Registration settings while EWS is in certain languages.
➢ Equitrac Authentication Agent sign-in agent is missing.
➢ If stop hard key is pressed while the device is in sign-in page of any application,
the device does not recover and we are not able to access any application on
home screen after that.
➢ PDF bar code not printed correctly.
➢ 33.05.17 Security Alert seen when base filename used to package and zip files
for solution bundling is too long.
➢ You may see a 33.05.18 error when using select Solution Providers software on
Firmware bundle 3.7
➢ EWS Session Id HttpOnly attribute in HttpCookie class set to true.
Embedded JetDirect:
➢ Functionality of the TCP MSS settings in Telnet has been restored.

➢ Fixed a situation where bad network packets (invalid checksum) could be accepted
and processed as if they were good.
➢ Resolved memory leaks (and possible device lockup) in DNS mapping logic when
handling uncommon IPv4/IPv6 scenarios.

Enhancements and Fixes provided with previous Firmware revision
ENHANCEMENTS:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENTS:
Base:
FIXES:
Base:
This firmware addresses the following security issue:

CVE-2016-2244
Embedded JetDirect:

ENHANCEMENTS:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
Firmware Datecode: xxxxxxxx
Firmware Revision: xxxxxxx_xxxxxx
ENHANCEMENTS:
Base:
➢ The device now has the capability to directly print TIFF files from the walk up USB
port.
➢ Added support for printing TIFF files.
➢ IPP Job Mandatory attributes and Page Overrides are supported in Airprint 1.5
phase 2.
➢ Additional support added for Code128, Code 3of9, OCR-A, and OCR-B.
➢ When No Media Type is specified in the job and Tray 1 is loaded and configured
(ex: letter, cardstock), a prompt with the default media type is seen in the mount
(default: plain). If we press “OK” then the tray will be seeded to the job size and
type. If the user decides to not accept this change and selects the modify button
and change the tray1 type and press ok, the mount comes back. What this means
is that the user will not be able to use what is loaded and configured in Tray1 with
the current job. This requirement provides the capability wherein an "Options"
button is displayed instead of "OK" in the mount and once user presses Option
button, he should be able to see two listings for Tray1, one with the current tray
settings and one with the Job settings. Once user selects Tray1 with Job settings,
Job size and Job type will be seeded in Tray1 and Job will get printed from Tray1.
If user selects any other listing it will be treated as override of Job to tray settings.
➢ The ability to include stapling of custom media types is now supported in
Quicksets.
➢ Whitelisting ensures only authentic, HP firmware code that has not been tampered
with is loaded into memory. If an anomaly is detected, the device reboots to a
secure, offline state.
➢ Runtime Intrusion Detection checks for anomalies in system memory during
complex firmware and memory operations. In the event an anomaly is detected,
the device automatically reboots. If the Auto-recover feature is disabled, or the
anomaly occurs twice within 30 minutes, the device reboots to a secure, offline
state.
FIXES:
Base:
➢ Issue with enlarged text when printing specific PDF documents with General Office
quality level selected.
➢ PCL XL error page is printed intermittently after retrieving the encrypted stored
Jobs.
➢ 49.4A.04 error is seen when printing certain PDF documents using PS driver or
Direct Print.
➢ 49.4A.04 error is seen when printing certain Microsoft Word documents using the
Print feature in the EWS.
➢ Printing certain PDF files using the Print Feature in the EWS may result in a blank
page being printed.
➢ Report pages are still able to be printed when Access Control has been locked
down for those menu items.
➢ Slow printing observed when using direct PDF for scanned documents.
➢ Configuration page not printed in few localization languages (Croatian,
Romanian, Slovak, Slovenian, Catalan, Indonesian, and Thai).
➢ Improved small job performance.
➢ While retrieving stored jobs, device hangs intermittently and control panel sub
menus are not accessible.
➢ Device hangs in "processing" state intermittently.
➢ When printing specific PDF documents via UNIX, users can get a message
regarding an Invalid Font, Failed reading start X ref number.
➢ Added the ability to support more characters when defining user defined paper
types via the embedded web server.
➢ Troubleshooting tab localization is wrong in German Language.
➢ Improved remote control-panel allowing access to remote operators while the initial
language and date/time wizard is open for new device installations as well as
some error messages.
➢ Unable to receive toner cartridge low alert email from when toner threshold value
is reached.
➢ You may see a delay in accepting data in the middle of a job or between jobs
when using the Equitrac solution.
➢ HPAC15.0 does not read proximity card correctly when waking from sleep mode
with OXPd1.7
➢ Keyboard layout setting is changed from "English (UK)" to "Japanese (Romaji)"
after upgrading FW from 3.2.7 to 3.4.
➢ Accentued characters missing with univers font on 3.4.
➢ Slow printing of specific PDF files.
➢ Slow performance on PPT files.
➢ The Esc E command is not resetting the PCL5 print environment when used with the
Paper Type command.
➢ 'Lines on page may not print when using certain PS or PDF print files.
➢ Adding a WJA Template has the potential to produce a 46.23.1C error.
➢ You may see the devices intermittently stop responding to SNMPv3 queries after 2-
3 weeks of up-time.
➢ " SNMP Value for hrMemorySize (OID 0.1.3.6.1.2.1.25.2.2.0) Reporting
Incorrect Memory Size."
➢ Arabic words on WinForms have separated letters only.
➢ A 49.38.07 may be seen on the control panel for no apparent reason.
➢ Home Screen Sign-In configuration (deny guest access) lost after firmware
upgrade.
Embedded JetDirect:
➢ Telnet setting "Bonjour RCNFG" reverts to zero after power cycling the printer.
➢ Intermittent system hang seen on several or all devices on the same subnet at
around the same time, devices are not even pingable.
➢ Upgrading from FS 3.4 will cause Bonjour protocol to be enabled - even if it was
previously disabled.

ENHANCEMENTS:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
Firmware Datecode: xxxxxxxx
Firmware Revision: xxxxxxx_xxxxxx
ENHANCEMENTS:
Base:
➢ The device now has the capability to directly print TIFF files from the walk up USB
port.
➢ Added support for printing TIFF files.
➢ IPP Job Mandatory attributes and Page Overrides are supported in Airprint 1.5
phase 2.
➢ Additional support added for Code128, Code 3of9, OCR-A, and OCR-B.
➢ When No Media Type is specified in the job and Tray 1 is loaded and configured
(ex: letter, cardstock), a prompt with the default media type is seen in the mount
(default: plain). If we press “OK” then the tray will be seeded to the job size and
type. If the user decides to not accept this change and selects the modify button
and change the tray1 type and press ok, the mount comes back. What this means
is that the user will not be able to use what is loaded and configured in Tray1 with
the current job. This requirement provides the capability wherein an "Options"
button is displayed instead of "OK" in the mount and once user presses Option
button, he should be able to see two listings for Tray1, one with the current tray
settings and one with the Job settings. Once user selects Tray1 with Job settings,
Job size and Job type will be seeded in Tray1 and Job will get printed from Tray1.
If user selects any other listing it will be treated as override of Job to tray settings.
➢ The ability to include stapling of custom media types is now supported in
Quicksets.
➢ Whitelisting ensures only authentic, HP firmware code that has not been tampered
with is loaded into memory. If an anomaly is detected, the device reboots to a
secure, offline state.
➢ Runtime Intrusion Detection checks for anomalies in system memory during
complex firmware and memory operations. In the event an anomaly is detected,
the device automatically reboots. If the Auto-recover feature is disabled, or the
anomaly occurs twice within 30 minutes, the device reboots to a secure, offline
state.
FIXES:
Base:
➢ Issue with enlarged text when printing specific PDF documents with General Office
quality level selected.
➢ PCL XL error page is printed intermittently after retrieving the encrypted stored
Jobs.
➢ 49.4A.04 error is seen when printing certain PDF documents using PS driver or
Direct Print.
➢ 49.4A.04 error is seen when printing certain Microsoft Word documents using the
Print feature in the EWS.
➢ Printing certain PDF files using the Print Feature in the EWS may result in a blank
page being printed.
➢ Report pages are still able to be printed when Access Control has been locked
down for those menu items.
➢ Slow printing observed when using direct PDF for scanned documents.
➢ Configuration page not printed in few localization languages (Croatian,
Romanian, Slovak, Slovenian, Catalan, Indonesian, and Thai).
➢ Improved small job performance.
➢ While retrieving stored jobs, device hangs intermittently and control panel sub
menus are not accessible.
➢ Device hangs in "processing" state intermittently.
➢ When printing specific PDF documents via UNIX, users can get a message
regarding an Invalid Font, Failed reading start X ref number.
➢ Added the ability to support more characters when defining user defined paper
types via the embedded web server.
➢ Troubleshooting tab localization is wrong in German Language.
➢ Improved remote control-panel allowing access to remote operators while the initial
language and date/time wizard is open for new device installations as well as
some error messages.
➢ Unable to receive toner cartridge low alert email from when toner threshold value
is reached.
➢ You may see a delay in accepting data in the middle of a job or between jobs
when using the Equitrac solution.
➢ HPAC15.0 does not read proximity card correctly when waking from sleep mode
with OXPd1.7
➢ Keyboard layout setting is changed from "English (UK)" to "Japanese (Romaji)"
after upgrading FW from 3.2.7 to 3.4.
➢ Accentued characters missing with univers font on 3.4.
➢ Slow printing of specific PDF files.
➢ Slow performance on PPT files.
➢ The Esc E command is not resetting the PCL5 print environment when used with the
Paper Type command.
➢ 'Lines on page may not print when using certain PS or PDF print files.
➢ Adding a WJA Template has the potential to produce a 46.23.1C error.
➢ You may see the devices intermittently stop responding to SNMPv3 queries after 2-
3 weeks of up-time.
➢ " SNMP Value for hrMemorySize (OID 0.1.3.6.1.2.1.25.2.2.0) Reporting
Incorrect Memory Size."
➢ Arabic words on WinForms have separated letters only.
➢ A 49.38.07 may be seen on the control panel for no apparent reason.
➢ Home Screen Sign-In configuration (deny guest access) lost after firmware
upgrade.
Embedded JetDirect:
➢ Telnet setting "Bonjour RCNFG" reverts to zero after power cycling the printer.
➢ Intermittent system hang seen on several or all devices on the same subnet at
around the same time, devices are not even pingable.
➢ Upgrading from FS 3.4 will cause Bonjour protocol to be enabled - even if it was
previously disabled.

Enhancements and Fixes provided with previous Firmware revision
ENHANCEMENTS:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENTS:
Base:
➢ No New Updates
➢ No New Updates
FIXES:
Base:
➢ After rebooting the printer, some customers may notice a significant drop in the
percent life remaining in their High Yield Black Original LaserJet Toner (X)
Cartridge.
➢ Added OID support for Cartridge Serial Number.
➢ FutureSmart Bundle version 3.5 is unable to communicate with WJA, DSS, LDAPs
and possibly others. The fix for this issue shall result in some changes of behavior
as listed below:
• Self-signed certificates shall be upgraded to SHA-256 and 2048 bit keys.
o There are a few special cases where a printer-generated self-signed certificate
will not get replaced during the update process. If this happens, then the
certificate can be manually regenerated afterwards.
• Older browsers that do not support SHA-256 encoding shall not be able to display
encrypted EWS pages.
• Browser security warning shall re-occur once.
Embedded JetDirect:
➢ No New Updates

Enhancements and Fixes provided with this Previous Firmware revision
ENHANCEMENTS:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENTS:
Base:
➢ Added the ability to view the "ProductNumber" and "LookAndFeelId" attributes in

the products via OXPd Solution Installer and the Jedi Embedded SDK.
➢ Added the ability for devices equipped with the stapler/stacker to automatically
reverse jobs and staple when printing landscape in the top-left configured under
stapling performance.
➢ The device can now communicate secure stored job options to the printer driver.
➢ Added Native printer support for “Google Cloud Print”. For setup and registration
instructions, go to www.google.com/cloudprint/learn/
➢ This firmware addresses the following security issues:

CVE-2014-3566 – SSLv3 POODLE (Padding Oracle on Downgraded Legacy
Encryption) Vulnerability Embedded Jet Direct:
FIXES:
Base:
➢ Error 33.02.01 is observed when upgrading the firmware from FS3.0 to FS 3.4.
➢ Devices crashes with Error 49.38.07 while processing a duplex PS job with
custom media size.
➢ Error "Unregistered Offending Command: ImageMask" is seen while printing
certain Jobs using a PS driver.
➢ Print Jobs are slow when driver Status Notification is turned ON.
➢ The time stamp does not show local time when EWS Job log is exported to CSV or
Text file.
➢ Communication failure is reported while using WJA to configure the device.
➢ Error 49.2A.01 is observed while printing certain word documents using discrete
driver.
➢ Error 49.4a.04 is seen when printing multiple copies of certain PDF documents.
➢ Printing an A4 document may display a prompt on the printer’s control panel to

load paper in the MP tray.
➢ When performing an Encrypted stored job via PC, the "Date Stored" time on the
device is incorrect.
➢ The following issues may be seen with the HP SmartCard reading device:
1) Device wakes up at the first insertion but it never prompts for the PIN ("please
wait" screen appears twice then goes off)
2) May need to insert the card twice to wake up the device
3) The device wakes up but the control panel displays "reader not detected"
message even though reader has connected already.
➢ When Trusted Platform Module (TPM) is installed DriveLock password cannot be

changed.
➢ Email FROM field does not reflect Authenticated user address when
GuestUserOverrride is set as default.
➢ A smartcard middleware crash can occur with cards containing an "empty
certificates" buffer when used with the NIPRNET Smartcard Authentication Solution
for US Government.
➢ A device hang can occur during smart card sign in if an invalid OCSP URL is
configured under Security -> Certificate Management of the device EWS.
➢ Device enters protected mode on the 6th failed logon attempt, instead of on the
5th failed logon. This issue only affects LDAP & Windows authentication.
Embedded JetDirect:
➢ HCP DISCOVER packets now include Tag 77 containing model and serial number
information for the printer/mfp.

Enhancements and Fixes provided with this Previous Firmware revision
ENHANCEMENTS:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENTS:
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ End users prevented from authenticating to the device for some period of time
following a digital send or pull print operation performed by a prior authenticated
user. Some customers report an inability to login until the device has been power-
cycled.
➢ No New Updates
Embedded JetDirect:
➢ No New Updates

FIXES AND ENHANCEMENTS PROVIDED WITH PREVIOUS

FIRMWARE REVISIONS:
ENHANCEMENTS:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENTS:
Base:
➢ Ability for administrators to configure an email alert for print, copy, send or fax
jobs that may be still processing or stuck after a given threshold.
➢ Ability for administrators or optionally help desk to remotely control device if
authorized from embedded web server.
➢ Added PDF 1.7 support for direct printing.
➢ Device settings can now be backed up and stored on the device before a firmware
upgrade is performed.
➢ Hebrew and Arabic languages are now available on the device control panel.
➢ Ability for administrators to configure product EWS for LDAP or Windows

Authentication Sign In for product tabs.
➢ Support added for extensibility solutions to use Windows and LDAP authentication.
➢ AirPrint 1.3 Authentication is now supported.
➢ Simplified Account Lockout is a feature to protect administrator and user accounts
and PIN protected stored jobs from brute force hacking attempts. The feature is
built into the interface with no configuration necessary. After 5 failed
authentication attempts, the system enters “Protected Mode” and inserts small fixed
delays to impede continued password guessing. (Note: Identical passwords are
treated as a single attempt.) After the user successfully authenticates, or the device
idle timeout expires, the “attempt counter” is reset.
➢ Provides improved logging performance for syslog security event logging when
printing multiple small print jobs.
➢ LaserJet Single Function Devices now support embedded Windows and LDAP
Authentication.
Embedded JetDirect:
➢ The default network interface used for outbound connections has been changed to
prioritize the Embedded Jetdirect followed by EIO, the 2700W and finally the
2800W. This priority is settable on the Networking tabs of EWS.
FIXES:
Base:
➢ 49.38.07 error seen when printing duplex jobs containing Thai fonts.
➢ If "ability to modify tray size and type" settings is locked for a user, Tray 1 "Use
Requested Tray - First" capability is lost. The printer cannot pick paper
automatically from Tray 1, even when loaded with correct paper size, and user
gets prompted to load paper into Tray 2 to complete the job.
➢ Errors in PCL which did not allow customer files to print, have been turned to
warnings.
➢ Printer is entering into a deeper sleep when a card reader is installed.
➢ Unable to read Barcode printed on configuration page.
➢ Duplex printing with Alternative Letterhead mode enabled, gives the wrong image
orientation.
➢ Multi-prompt authentication screens with an "Information" page that contain only
"Label" controls and OK and Cancel buttons, appear blank on the small screen
devices.
➢ When trying to retrieve all Encrypt jobs, the device doesn't print till the printer
display resets back to home screen.
➢ When a device with an empty tray, has been discovered in WJA, it does not send
"Paper Out" alert, even after subscribing for it.
➢ When selecting the Japanese Language on printer control panel, the Font Source:
"USB1” may show as “USB{0:d} {1}”
➢ Long print jobs may be terminated with an error if printing is stalled waiting for a
user interaction such as loading paper.
➢ "Personal Jobs" with Encrypted job (With Password) are not getting stored via IPP
driver
➢ The Form Length and the Font number PCL values are reset to default after printing
some documents and rebooting the device.
➢ Some improvements in printing back to back small one-two page jobs.
➢ No New Updates
Embedded JetDirect:
➢ Network settings, e.g. static IP address, configuration method, etc. intermittently

reset to default values.
➢ Very long Postscript jobs sometimes do not print
➢ A delay may occur between print jobs when CCC logging is enabled
➢ A number of ports between1033 and 1044 report as Open/Filtered
➢ Network configuration is reset to DHCP after a firmware upgrade.
➢ Current 32K TCP buffers cause excessive delay on long latency/high bandwidth
transfers.

FIRMWARE REVISIONS:
ENHANCEMENT:
➢ No New Updates
Base:
➢ If a job is still being processed and has not completed, an email alert can be sent
out notifying administrators that there may be a stuck job. This can be helpful if
troubleshooting situations where fax, send or print jobs are hung but if the time is
set too low may generate false-positives. It is recommended to be used as a
diagnostic technique when troubleshooting stuck jobs where the device is not
frozen only
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ This firmware address the following security issue: CVE-2014-0224 - SSL/TLS

MITM vulnerability
➢ Some control panel authentication screens on single function devices were not
displaying complete informational text.
➢ Device embedded web server can now be configured to use Windows or LDAP
sign in (if configured on the device) instead of the EWS administrator password.
This functionality excludes the Web Services and Networking tabs of the EWS,
which still require the device admin password.
Base:
➢ Device is not reporting the custom device name

➢ When printing Mixed Letter/Legal jobs sent by HP-UX OS, if the number of copies
is not specified for a particular papersize, it takes the number of copies of the
previous set.
➢ Paper load prompt not consistent between FutureSmart products
➢ The message within Web JetAdmin "Intervention Needed" is not cleared even after
intervention was cleared from the device.
➢ You may see a 49.38.13 error using Autosend when not configuring a site proxy
with credentials.
➢ Some characters may be italicized when printing files via a USB thumbdrive
➢ Retrieving large amounts of stored jobs may take a long time to verify before
printing.
Embedded JetDirect:
➢ Manually configured hostnames are intermittently being reset to factory default

values (NPIxxxxx)
ENHANCEMENT:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ No New Updates
➢ No New Updates
Embedded JetDirect:
➢ No New Updates


FIRMWARE REVISIONS:
ENHANCEMENT:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENT:
➢ No New Updates
Base:
➢ The Job Cancel button behavior has changed to prompt a user to either resume or
cancel the job, which is now also tied to the inactivity timeout. We also have the
ability to remove the Job Cancel button (red x) from the CP of the device.
➢ Now have the ability to support up to 28 characters for Custom Media types.
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ You may see a 50.22.xy error when fuser is warning up.

➢ The Web Services tab may be missing.
➢ Private Jobs are not sorted and printed properly on devices with the solid state
drives.
➢ Sending Personal Private Stored Jobs with Encryption does not keep copy count.
➢ Certain character may get flipped or mirrored in some documents.
➢ You may see a 49.4A.04 error when printing certain Websites or PDF files.
➢ Retrieving all Personal jobs may result in the print all option not working
until the device is rebooted.
➢ No New Updates
Embedded JetDirect:
➢ The printer will randomly become unresponsive due to excessive printer queries.
➢ Certain SNMP network traffic may cause the printer to come out of a 1 Watt
mode.

ENHANCEMENT:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ No New Updates
Embedded JetDirect:
➢ No New Updates
ENHANCEMENT:
➢ Security Self Test enabled through the embedded web server - EWS->Security Tab-
>Self Test page
➢ Support added for HP Smartcard US Government SIPRNet Solution
Base:
➢ New setting to configure job timeout for "Permanent Jobs" for Job Retention.
➢ Added the ability to allow an administrator to change the Service PIN on their
device.
Embedded JetDirect:
➢ No New Updates
FIXES:
➢ No New Updates
Base:
➢ You may see message saying Tray 2 open or Bad duplex connection when
incorrect duplexer is installed in the LJ600 series device.
➢ Print Service may be blocked when an IOF is installed
➢ If a cold reset is performed when a solution is loaded, the EWS->Security->Access
Control page still showed Solution entries which no longer exist.
➢ You may see a 49.4A.04 error when printing certain web pages or PDF files.
➢ When installing some CCID card readers you may see the following error -
"Invalid USB device is attached. Please remove it."
➢ Sending a PCL job to the printer with a bin specified as 0 or no bin specified the
printer will default to bin 3 and staple.
➢ You may see an extra blank page printed after printing raw PCL coded jobs.
➢ The Embedded Web Server exported view of the Job Log does not match what is
on screen.
➢ May fail to wake from sleep when device is setup to wake (turn on) on a wake
schedule.
➢ When stapling is requested within the print driver you may see the first page
separated from the remaining job which is stapled.
➢ General Stored Job Settings menu missing on the 4-line products
➢ Adding an envelope feeder to the LJ 600 series devices may causes the event log
to fill up with 42.B0.01 errors
➢ No New Updates
Embedded JetDirect:
➢ When exporting the Jetdirect Identity certificate, the password is incorrect

➢ The link speed reported over SNMP is incorrect for 1000T
➢ IPP should not be reporting an error on exiting priority-mode job during printing

ENHANCEMENT:
Base:
➢ An image preview of a Stored Job will be provided on the control panel before
printing the Stored Job.
➢ No New Updates
Embedded JetDirect:
➢ Added support for NFC and Tap to Print

FIXES:
Base:
➢ No New Updates -- Original Release
Embedded JetDirect:
ENHANCEMENT:
Base:
➢ The Generate Debug Data feature is now available in the products Embedded
Web Server.
➢ The maximum number of Stored Jobs has been increased to 300 to be compatible
with the older Legacy devices.
➢ A Partial Clean can now be initiated from the products Embedded Web Server.
➢ Added additional SNMP values to conform to the Standard Printer and Host
Resource MIBs.
➢ Time zones for Russia have been changed to reflect the time zones used in this
country.
➢ The Optimize speed energy usage values were provided so Web Jet Admin can
configure these values.
➢ Error messages and codes have been improved
➢ The "Resend Upgrade" message will appear on the device if no firmware is on
Backup/Repository partition.
➢ A reduction in the firmware bdl file sizes has been provided in this release. For
some products this can be as high as a 50% reduction in size.
➢ This firmware release provides the ability to switch FutureSmart levels. It is only
supported on device that ship with FutureSmart Level 2. Documentation is
available on www.hp.com to learn more about this feature. Steps to perform the
level switching are provided in this readme file.
➢ Job Data encryption using AES-256 has been added on devices with Solid State
mass storage (SSD). The default is AES-128.
➢ Secure storage of all externally exposed passwords has been updated to industry
standard SHA-256 hashing and AES-256 encryption.
➢ HP US Government Smartcard Authentication is now available as a configurable
sign in method for non-MFP print devices. This capability requires the installation
of the HP USB Smartcard reader.
➢ Windows and smart card authentication are now available on single-function
printers
Embedded JetDirect:
➢ Now able to enable/disable wireless direct print through a web service call
FIXES:
Base:
➢ You may see the device power cycles during a pull print process.
➢ When using AirPrint the printer may drop out of the available printer list.
➢ An ePrint document sent to the printer will always prompt to load paper despite the
correct paper size being available in other Trays
➢ Printer hangs when using Parallel to USB cable
➢ Encrypted job storage jobs (from driver settings) do not delete after power cycle
➢ Reporting Incorrect Status after tray is refilled
➢ You may see a 49.38.11 error when printing
➢ e-Print not be able to communicate with HPePrintCenter.com, Registration process
timeout. Please try again.
➢ Device is displaying copy screen in the presence of a FIH device with no credits
and it does not change the credit state when a credit is added.
➢ A Stored Job image preview may be inverted when previewed.
➢ email address of printer is missing from Control Panel
➢ An "Out of Space" message or a blank firmware revision string may be seen when
loading a firmware image after a attempt with a corrupted image.
➢ An intermittent 49.38.07 may occur when upgrading Firmware via WJA when
DSS is installed.
➢ You may see a 41.3 unexpected paper size error when sending a print job with
the settings Any Size and a specific Media type.
➢ When the device language is set to Russian the Current Settings Page will not
print.
➢ When a Service Formatter is replaced the Web Service Tab may disappear
➢ Large print jobs may show a 1cm shift in page alignment
➢ In the Embedded Web Serve when setting/clearing the admin password using the
wizard (Networking>Settings>Wizard), the changes do not show up under the
admin password under Security>General.
Embedded JetDirect:
➢ Digital Send fails when an optional network interface is installed

➢ Printer/MFP crashes or hangs when a 2700w is installed
➢ Telnet sessions do not automatically close if device enters Auto-OFF
➢ Printer/MFP cannot be reached with IPv6 address when in Auto-Off
➢ WJA cannot configure "Use Stateless DHCP when Manually Configured"
➢ TCP acknowledgements are delayed or not sent
➢ Print and other TCP connections may be interrupted by Auto-Off
➢ The counter Job-media-sheets is reported incorrectly

ENHANCEMENT:
Base:
➢ Added the ability to perform a Paper Path Test for the accessory output bin.
➢ SNMP page counters were added:
Object Name
OID
Description
PRINT-METER-EQUIVALENT-IMPRESSION-COUNT.1
1.1.16.1.44.1.1
A4/Equiv Mono Print Impression Count
1.1.16.1.44.1.2
A4/Equiv Mono Copy Impression Count
1.1.16.1.44.1.3
A4/Equiv Mono FAX Impression Count
PRINT-METER-EQUIVALENT-IMPRESSION-COLOR-COUNT.1
1.1.16.1.44.2.1
A4/Equiv Color Print Impression Count
1.1.16.1.44.2.2
1.1.16.1.44.2.2
1.1.16.1.44.2.1
A4/Equiv Color Print Impression Count
1.1.16.1.44.2.2"
➢ EU products will have lost the ability to disable sleep to meet Blue Angel
certification
➢ Backup and Restore scheduling has be removed from the control panel to enhance
reliability and eliminate complexity.
➢ A "Bin Full" message and a Jam message occurring at the same time could result
in a Bin Full message being displayed instead of a Jam message, even after the
bin was emptied.
➢ WJA could not set the Time Zone in previous releases
➢ The remote configuration password that can be set in the Embedded Web Server
is not being restored when Back Up and Restore is performed with a restore that
includes the Password.
➢ Default "From:" address can now be specified for Email alerts and AutoSend
➢ PQ Troubleshooting Pages are now available for Mono Devices
➢ Enhancements to meet new Blue Angel and Energy Star requirements.
➢ USB port insertion will now wake the device from Sleep
➢ Added AirPrint 1.2 IPP Support
➢ Added AirPrint 1.2 Bonjour Support
➢ An unregistered USB device can now be added before the solution is loaded
Embedded JetDirect:
➢ No new updates
➢ The printer can now directly register its hostname and domain with DNS,
compliant with RFC 2136.
➢ "*As an enhancement*: When optional network interfaces are installed, the
primary interface for Digital Sending and Solutions will remain the embedded
wired interface.
➢ *As a defect*: Digital Sending and Solutions are routed to optional network
interfaces when they are installed instead of using the embedded wired interface."
➢ The printer can now directly register its hostname and domain with DNS,
compliant with RFC 2136.
➢ Expanded support for Kerberos encryption types used with IPSec has been added,
to provide parity with Kerberos in Windows Server 2008 environments
➢ Support for SHA-256 hashing and AES-256 encryption introduced to meet
regulatory requirements including NIST Special Publication 800-131a requiring
SHA-256 hashing for digital signature generation. Passwords encrypted with AES-
128 are automatically re-encrypted with AES-256 during the firmware upgrade.
➢ DNS SRV and TXT responses are now cached
➢ Jetdirect now includes a UTC timestamp in CCC log messages
➢ An option to verify the server certificate when pulling print jobs from a server using
IPP/IPPS has been implemented
➢ Special ASCII characters are now supported in the WEP password
➢ Support for SHA-256 hashing introduced to meet regulatory requirements

including NIST Special Publication 800-131a requiring SHA-256 hashing for
digital signature generation.
Support for TLS 1.1 and TLS 1.2 protocol introduced. TLS 1.2 provides enhanced
security and support for SHA-256.
IMPORTANT NOTE: If TLS 1.0/SSL 3.0 is disabled, both the Client (web browser)
and Server (MFP) must enable support for TLS 1.2 or EWS communication will be
DISABLED. Most web browsers do NOT support TLS 1.2 by default.
IMPORTANT NOTE: No TLS 1.2 support for HP Web JetAdmin, HP Imaging &
Printing Security Center and HP Digital Sending Software until Fall 2013.
Disabling TLS 1.0/SSL3.0 will disable compatibility with these solutions.
IMPORTANT NOTE: SNMP version 3 support for AES-128 and SHA-1 introduced
in this firmware version. No HP Web JetAdmin support for SNMPv3 AES-128 and
SHA-1 until Fall 2013. Enabling these options will disable compatibility with HP
Web JetAdmin.
➢ The Printer Job Language (PJL) Device Access Command Enable/ Disable setting
determines if the device accepts PJL device management commands.
Clearing the checkbox disables PJL device management commands and provides
additional security by preventing unauthorized modification of device settings.
PJL Device Access can be disabled by WJA, EWS and IPSC (Imaging & Printing
Security Center)."
➢ Firmware bundles digital signed using SHA-2 hashing algorithm to meet new
regulatory requirements in NIST Special Publication 800-131a.
FIXES:
Base:
➢ When a Bar DIMM or IPDS solution has been installed through WJA certain
settings set with WJA will not set correctly.
➢ A control panel message of Tray X open is displayed when the wrong duplexer is
installed.
➢ You may see a 49.23.CB error occurs when printing the Internal Configuration
Page.
➢ You may see a longer than expected processing time when using an HP Output
Server to print a job.
➢ You may see "Tray X open" control panel message when wrong duplexer is
installed.
➢ "Any Size" for tray 2 and greater is missing from the menu. - breaking backward
compatibility.
➢ Pushing the start button multiple times for a personal stored job results in multiple
copies being printed.
➢ Downloading Fonts causes 49.38.0C
➢ Font Source reverts back to Internal after reboot
➢ When setting up eprint, any document that prints is looking for tray 1 so the printer
requests paper in Tray one and job will not print until someone goes to the device
and selects a different tray(tray 2) or loads paper in the side tray(tray 1).
➢ You may see a print job that is printed successfully but the Job Status is displayed
as "Failed" when using the Macintosh driver.
➢ User Defined types are not getting updated in UPD after enabling VIA EWS pages
➢ "Wake/Auto On to These Events" options are disabled when the Sleep
Mode/Auto Off After… mode is disabled
➢ The Help screen, accessed by pressing the ?, for the Configuration/Status display
omitted some items
➢ In certain languages the Scan Status dialog shows truncated messages.
➢ Device will wake up if a sleep schedule has been set and the device was already
asleep
➢ Setting the @PJL DEFAULT LANG variable on FutureSmart devices does not
permanently change the device language
➢ After adding an output device the unit does not recognize a J-font encrypted USB.
➢ Error message for failed backup to network folder is cut off
➢ You may see a hang in the 2/8 boot up stage if the Sleep Timer Setting is set to
wake on a Network Port Event and printer has been in sleep mode.
Embedded JetDirect:
➢ Text entered in the "Product Support URL" and "Technical Support URL" fields in
the device web pages were not filtered to eliminate HTML commands.
➢ The front control panel is not wrapping the text when the printer is in a wireless
configuration mode.
➢ Device loses the IP Address for both wired and wireless when IPv6 is disable
and enable via the EWS
➢ IPSec Aggressive mode is not working
➢ 3rd party solutions could unexpectedly stop working after a 3rd part developer's
signing cert expires. This version of firmware resolves this failure by checking any
timestamp that is available for validity.
➢ The device Remote Configuration Password credentials incorrectly allow access to
the EWS configuration interface. The Remote Configuration Password is used by
remote configuration tools including HP Digital Sending Software and HP Web
Jetadmin to connect to the device.

HP Fleet Release Designation FutureSmart 2 SP3
ENHANCEMENT:
Base:
➢ The printer will now have the ability to retain Personal Jobs after a power cycle.
➢ The device will no longer enter sleep mode if the user is interacting with it.
➢ Support is added for the HP CalcPad 100 numeric keypad
➢ User Defined Media Type names that are changed via SNMP they are not
updated in the Control Panel.
➢ Custom papers sizes are now supported with AirPrint
➢ The printer will now delete temporary stored jobs at the scheduled time regardless
of the sleep state. Previously some sleep modes extended the expiration time for
the job
➢ For Devices with two LED's the Ready Light will flash to indicate the device is
receiving data. This behavior will mimic the behavior seen for a device that has a
Data LED.
➢ Usage counts are now included in a Save/Restore operation
Embedded JetDirect:
➢ JetDirect would not accept a certificate from an Intermediate Certificate Authority.

➢ JetDirect would disable networking if 802.1x authentication fails
➢ DHCP is not negotiated after a link break/restore.
➢ No new updates
FIXES:
Base:
➢ You may see a 49.38.07 error using HPAC with FutureSmart 2 SP 1.02
➢ When setting up the energy schedule you will see an incorrect localization for
German days of the week.
➢ You may not see the User name on Job Status menu when printing from Mac OS
➢ After rebooting the printer Quiet Mode was no longer set.
➢ You may see the tray selection is not working as expected via AS400 printing.
➢ Close Rear Door message appears on the M600 series when door is open and
customer wants straight though paper path
➢ You may see "Tray X Open" when wrong duplexer is installed.
➢ The M600 Series does not offer media types for Envelope Feeder.
➢ PJL DENSITY command causes pages to be printed upside down.
➢ German language does not allow you to set the Adjust Tray 1 setting under the
Image Registration menu
➢ LaserJet M600 series printer may not reply to PJL ReadBack Commands
➢ After disabling AirPrint and IPPS in the Embedded Web Server the ePC displays
"ePrint is off"
➢ Using the job Interrupt may cause a job that is interrupted to hang or become
unresponsive.
➢ A 49.23.CB error may be displayed when performing an Engine Test
➢ Japanese Text on the front control panel does not rap to a new line and is clipped
on right side.
➢ Unable to receive e-mail alert as xml through intranet
➢ An SNMP walk may time out if a print job is printing during the walk.
➢ Adjusted SNMP to mimic non-FutureSmart products for get command responses
when invalid set commands are sent
➢ The Fuser and Transfer Kit Maintenance information is missing on the
Configuration page.
➢ Long names are being cutoff in Retrieve from USB on SFP products
➢ Order of Configuration pages is different between MPS's and Single Function
Devices.
➢ Fixed an unlocalized authentication agent name string in security webservices
➢ "Upgrading to this revision of firmware will keep the following message from
appearing in the Embedded Web Server "The operation failed because there is
not enough available disk space."
➢ Firmware install times are improved with this release
➢ When using ePrint and the wireless network card is used the printer is not
displaying an alert message "Ink/Toner is Low" when the ink/toner is low.
➢ You may see differences within the same font used with certain PDF files.
➢ Device does not prompt to "Close Rear bin" if document is printed to "Output bin
2" when "Rear bin door" is opened.
➢ It is not possible to cancel either a Backup/Restore from the device or the EWS
during the Backup/Restore process.
➢ Garbage print will occur when the data flow from the spooler to the printer gets
interrupted (timeout) when printing via IPP. When and if a print job is interrupted,
our devices should eventually discard corrupted data. However, it finishes the job
and starts to print garbage.
Embedded JetDirect:
➢ The Cancel button (X) was inoperative after installing the 2700W wireless
accessory
➢ Wireless authentication using WPA Enterprise with certificates does not re-
authenticate when the identity certificate is changed.
➢ The Wireless SSID was displayed on the front panel, presenting a potential
security risk.
➢ Setting the IP address manually over the control panel fails intermittently.
➢ When announcing and registering with HP Imaging and Printing Security Center
(HP IPSC), the printer neglects to verify the identity of the server.
➢ No new updates

ENHANCEMENT:
Base:
➢ Added the SSID# to the How to Connect menu when using Direct Print.
➢ The wrong name was used for several paper path sensors when performing sensor
tests.
➢ Add capability for new Print Mode: Mid weight mode
➢ Added page counting/metering for the Envelope Feeder
➢ Add capability for new Print Mode: Mid-wt glossy mode
➢ Added PJL Media Margins Command to support AirPrint.
➢ Added Oficio media sizes for Latin America Legal Media
➢ Identification for which FutureSmart Version and Service Pack currently being used
has been added to the Configuration page.
➢ AirPrint functionality for URF and PDF 1.4 has been provided
➢ SNMP support provided for the UPD printer Drivers
➢ Added Web JetAdmin support for determining PJL versioning and PDL language
support
➢ Adjustable Print modes can now be adjusted by Web Service
➢ Values on devices that show "Print Cartridge" will be changed to show "Toner
Cartridge"
➢ Language support has been added to single function devices for the Do Not
Unplug Icon.
➢ Particular 49.38.07 errors have been changed to 49.38.18 errors to add more
details with regards to why the error happened.
Embedded JetDirect:
➢ Certificates default to 1024 bit encryption key

➢ Support is added for multiple JetDirect interfaces
➢ Certificate registration now occurs during certificate install, avoiding dual

registration issues. In addition, HTTPS binding of the certificate also now occurs
during certificate install
FIXES:
Base:
➢ You Printer can be discovered even though AirPrint is disabled.

➢ When printing mono URF jobs to mono printers, the device generates incorrect
output on certain media sizes
➢ You may see a 49.2F.E3 errors while printing personal stored jobs with pin
➢ 8.26x11 paper size does not automatically print on FutureSmart devices like it
does on older Legacy devices.
➢ Printing some PDF files may cause a 'Invalid PDF file" error message
➢ Custom PostScript Level3 fonts may cause a PostScript error page to print or a job
to not print at all if PostScript errors is turned off.
➢ You may see the device slow down when using "Retrieve from Device Memory"
➢ Two SNMP objects are returning a value of Zero when they should provide
meaningful information. The two objects are prtAlertGroupIndex and
prtAlertLocation.
➢ The Cold Reset Paper Type is set to A4 the value used to compute the correct
paper size in the metric system is wrong.
➢ Multiple issues with SNMP OID values have been corrected
➢ Some error states are not reflected properly when using a Mac or AirPrint driver.
➢ When using AirPrint a "tray open" message may not be displayed on the host
when a tray is opened on the printer.
➢ The device may return incomplete / wrong values if a program queries it using
@PJL INFO VARIABLES
➢ You may see a 89.12.BB scanner error on a printer (no scanner)
➢ A "Disk Full" message may be seen when loading firmware through the Preboot
Menu.
➢ When printing from a USB device from the front control panel the device ignores
the number of copies and only prints one.
➢ A 99.06.01 error may be seen in the event log without any description.
➢ PCL tray commands are not working properly for certain paper types.
➢ Not able to store Macros on the device so PCL stream can access.
➢ Manual feed prompts to tray 1 will ask you to load Plain media even if you have
selected Unspecified in the driver.
➢ EWS stop responding after a DST Offset is set with more than ten digits
➢ The OID - .1.3.6.1.2.1.43.5.1.1.17.1 - may pull inconsistent data from different
devices
➢ A message to confirm the tray size and a prompt to load the requested the paper
in the tray is not seen when the paper size is changed for a tray while in sleep
mode and a print job wakes the device to print out of the tray whose size was
changed.
➢ You will see a Tray 6 empty message instead of Tray 6 lifting after media was just
loaded and it is lifting.
➢ During a condition where the wrong paper size is printed on during a print job the
user will not see a message prompt to address the misprint when the tray is
opened and closed.
➢ Embedded Web server pages may load slowly
➢ On first boot up if the shipping sheet is not removed you will see an incorrect error
message of "Tray 2 Empty" instead of "Remove shipping sheet".
➢ Welcome message may not localize correctly when signing in and changing
localization.
➢ VPSX PJL to get printer status fails
➢ You may see a 49.38.07 error while trying to retrieve a Job from a USB
Thumbdrive.
➢ You may see a "Options Conflict. No backup files available for exporting" error
when attempting to export the backup file.
➢ You may see a 49.38.07 error when viewing the Job Status menu and printing or
copying at the same time.
➢ Back button on SFP does not work in Initial Setup Prompts
➢ PJL USTATUS will now return Job Display Name
➢ When using AirPrint the URF is Not Using Color Tables.
➢ Support for two line control panel display modifications using SNMP has been
added. One line screens will alternate to line messages.
➢ Network communication may not wake device when in 1 watt sleep mode.
Embedded JetDirect:
➢ JDI goes offline after changing the network link speed.

➢ You may see a 49.38.02 error on Power Point printing from an iPad.
➢ During import of user PINs the progress barber pole is not present. With high
numbers of imported records (~2000) a confirmation screen may not appear, and
a reboot may be required to get the unit back to Ready
➢ When a digital certificate is installed using the Create Certificate Request option,
the device embedded web server is no longer able to be accessed

ENHANCEMENT:
Base:
➢ Added backwards compatibility of PDL commands to control source input trays

with all PDLs
➢ Added the ability to modify trays security constraints
➢ Ability to Unlock stored jobs based on authenticated user.
➢ Ability for a User or Administrator to re-print the Welcome page.
➢ This feature provides access for web services applications, including Web
Jetadmin, to the FIPS 140-2 status information of installed encrypted hard drives
and the ability to enable/disable the encryption on the drive.
➢ The ability to prevent disk corruption when power plug pulled during Firmware
upgrade.
➢ "Add a new internal page: Administration > Reports > Configuration/Status Pages
> Web Service Status Page
➢ On this page it will list all of the currently running web services."
➢ Usage Page displays the correct tray information and counts for an Installed
Envelope feeder.
➢ The ability to collect diagnostic log information if not able to boot to Ready. This
new feature allows you to use the Pre-boot menu and a USB thumbdrive to collect
the log files.
➢ Added the ability to Support Additional Output Bin Types with Paper Path Test
➢ The ability to hide the Job list
➢ "The user can enable/disable 10 User Defined Media Types via SNMP, Web
JetAdmin or EWS. The user can assign a print mode to the User Defined Media
types. The user can create their own customized name for the User Defined Media
Types.
➢ The UI constrains the displaying of User Defined Media Types based on whether
the SNMP OID has been enabled or disabled. When disabled, the specific User
Defined type is not listed in the Adjust Paper Type menu. When enabled, the
specific User Defined Media Type is displayed in the Adjust Paper Type menu."
➢ Unsupported USB device messages are now able to be hidden.
➢ The signed in Username will now be visible from most control panel screens
Embedded JetDirect:
➢ No New Updates
FIXES:
Base:
➢ Corrected the naming schema for the Output device.

➢ After losing power and power is restored the device may boot up and hang while
displaying "Checking Printer"
➢ When using Internet Explorer 9 and the Administrator Password is set, the Logout
link cannot be clicked and one is also not able to Navigate directly to Sign In
Page
➢ You may have seen an Unknown String in the Eventlog.
➢ Some PJL variables are not reset to their proper defaults after a @PJL RESET
command
➢ You may see tow media sizes highlighted while trying to modify the size and then
canceling the option.
➢ After enabling USB Application it does not always display on Control Panel
➢ Using the "Back" hardkey while on the Enter Password screen no longer disables
the User Login screen.
➢ You may see a 49.37.08 error when using a multiprompt authentication schema
➢ Importing large CSV files can cause the Embedded Web Server to become
unresponsive during the import
➢ Corrected error message when attempting to print corrupt stored jobs.
➢ Device Default Media Type can now be correctly configured via WJA or EWS
Embedded JetDirect:
➢ Will not print in greyscale

➢ Device may display an 84.01.81 when printing certain PDF files.
➢ EWS Help page is not available
➢ Inappropriate error message when applying IPv6 manual network settings without
providing an address.
➢ IPP 2.0 compliance mistakenly advertised outside of XMPP
➢ Strict mode of "Secure TLS Renegotiation" does not block ePrint registration when
server does not comply with Secure TLS Renegotiation.
➢ Secure@Install support is now available
➢ Jetdirect will fail under certain high-load network traffic situations
➢ ePrint jobs will not complete when started during other print jobs (port 9100)

Embedded JetDirect: V50251131008
HP Fleet Release Designation CPE 11.3
ENHANCEMENT:
Base:
➢ No New Updates – Original Release
Embedded JetDirect:
FIXES:
Base:
Embedded JetDirect:

Embedded JetDirect: V50251103076
HP Fleet Release Designation Original Release
NOTE: ALL IMPROVEMENTS WITH PREVIOUS REVISIONS OF FIRMWARE ARE

INCLUDED WITHIN THE MOST CURRENT REVISIONS
-- Original Version
Installation Instructions
NOTE: Please be aware that an update in some circumstance may require ten minutes or
more to complete.
You can send the firmware update to a device at any time; the device will wait for all I/O
channels to become idle before cycling power.
Please print a configuration page prior to performing any firmware update. To print the
configuration page:
1. Go to the printer’s control panel.

2. Press the Home or OK button.
3. Scroll down to the Administration menu and press OK.
4. On the Reports menu press the OK button.
5. On the Configuration/Status Pages menu press OK.
6. Scroll down to the Configuration page option and press OK.
7. Scroll back up to the top to the Print option and press OK.
On the printed Configuration page look in the section marked "Device Information" for the
Firmware Datecode and Firmware Revision. The Firmware Datecode and Firmware
Revision will look something like this:

The elapsed time for an update depends on the I/O transfer time as well as the time that it
takes for the printer to reinitialize. The I/O transfer time depend on the speed of the host
computer sending the update and the I/O method (USB or network).
The re-initialization time will depend on the specific hardware configuration of the printer,
such as the number of EIO devices installed, the presence of external paper handling
devices, and the amount of memory installed. Finally, any print jobs ahead of the
firmware job in the queue will be printed before the update is processed.
NOTE: When the update process has completed the LaserJet will need to be rebooted.
Once the printer is back online, print a Configuration Page and verify that the new
firmware has been installed.
Additional information to know
The firmware file will be in the following file format “xxxxxxx.bdl” where “xxx” indicates
the firmware file name and the “.bdl” is the files extension.
This file requires an interactive update method. You cannot update the printer using the
traditional FTP, LPR or Port 9100 methods of upgrading. Please use one of the following
methods listed below to update the firmware of this device.
How to perform firmware upgrades.
Embedded Web Server: (control panel is at a Ready screen)
Please visit the following link to a view video on this firmware upgrade method explained
below.
YouTube :
http://youtu.be/Gv6OprEg7Es
Brightcove:
http://link.brightcove.com/services/player/bcpid1190528646001?bctid=REFID
BC3707096437001
NOTE: Please be aware that an update in some circumstance may require ten minutes or
more to complete.
After uncompressing the file you will see a xxxxxxx.bdl file.

1. Open an Internet Browser Window.
2. Enter the IP address in the URL line.
3. Select the Firmware Upgrade link from within the Troubleshooting tab.
NOTE: If you get a warning screen please read and following instruction for setting a
Administrator password within the Security Tab.
4. Browse to the location that the firmware upgrade file was downloaded to, and
then select the firmware file. Select the Install button to perform the upgrade.
NOTE: Do not close the Browser Window or interrupt communication until the
Embedded Web Server displays the Confirmation Page.
5. Select Restart Now from the EWS confirmation page, or turn the product off
and then on again using the power switch. The printer will not automatically
reboot.
Once the printer or MFP is back online, print a Configuration Page and verify that the new
Walk-up USB thumb drive: (Standard control panel menu)

Please visit the following link to view a video on this firmware upgrade method explained
below.
YouTube : http://youtu.be/IOsm1Z-dbJU
Brightcove:
http://link.brightcove.com/services/player/bcpid1190528646001?bctid=REFID
BC3707191411001

1. Copy the xxxxxxx.bdl file to a portable USB flash memory storage device (thumb
drive).
NOTE: USB Flash Drives that are not in a Fat32 format or having a CD formatted
partition may not be recognized by the printer. You may need to try a different USB
flash drive.
2. Turn the printer ON.
3. Press the Home or OK button
4. Press the Down arrow to highlight Device Maintenance, and then press OK.
5. Press the Down arrow to highlight USB Firmware Upgrade, and then press
OK.
6. Insert the portable USB storage device with the xxxxxxx.bdl file on it into the USB
port on the front of the product, and then press OK.
7. Press the Down arrow to highlight the xxxxxxx.bdl file, and then press OK.
NOTE: If there is more than one xxxxxxx.bdl file on the storage device, make sure
that you select the correct file for this product.
8. A prompt to upgrade an older, newer, or reinstall the same version appears. Press
the Down arrow button to highlight the desired option, and then press OK.
When the upgrade is complete, the printer will reboot automatically.
NOTE: The upgrade process may take 10 or more minutes to complete. Please do
not interrupt the updating process.
Pre-Boot walk-up USB thumb drive: (control panel Pre-Boot menu)

NOTE: Only to be used if the printer is not able to boot to READY
1. Copy the xxxxxxx.bdl file to a portable USB flash memory storage device (thumb
drive) in the root directory.
NOTE: USB Flash Drives that are not in a Fat32 format or having a CD formatted
partition may not be recognized by the printer. You may need to try a different USB
flash drive.
2. Turn the printer ON.
3. Press the Stop button when the Ready, Data and Attention LEDs illuminate solid.
4. Press the Down button to highlight Administrator, and then press OK.
5. Press the Down button to highlight Download, and then press OK.
6. Insert the portable USB storage device with the xxxxxxx.bdl file on it.
NOTE: Please make sure the firmware file is located in the root directory of the flash
drive. If you have more than one .bdl file on your USB flash drive, select the file you
want loaded and press OK.
Please be patient since this may take up to 10 minutes to reboot.
7. Press the Down button to highlight USB Thumbdrive, and then press OK.
8. Press the Down button to highlight the xxxxxxx.bdl file, and then press OK.
NOTE: If you have more than one .bdl file on your USB Thumb drive, select the file
you want loaded and press OK.
Please be patient since this may take up to 10 minutes to reboot.
9. When the message Complete appears on the control panel display, press the
Back button 3 times.
10. When the message Continue appears on the control panel display, press OK.
11. The printer will continue to boot to the Ready state.
Web Jetadmin (Supported with version10.2 SR4 or newer)
Please visit www.hp.com and type “Web Jet Admin” in the “Search” Box to find more
information about new releases of Web Jetadmin and the release note information for
those releases.
Upgrading Firmware:
1. Start Web Jetadmin 10.2 SR4 or newer
2. From the “Device Management” section, select "All Devices” (or the appropriate
device group). An “All Devices” list will appear in the center window.
3. Find your device in the list, or type the IP address of the device in the Quick Device
Discovery section in the lower-left of the screen (this will highlight your device in
the device list). You can sort the device list by clicking on a column name at the
top.
4. If your device list is sorted my model number, you may select multiple devices with
the same model number by Control-Click or Shift-Click.
5. Right-click on the device and select “Upgrade firmware…”.
6. An Upgrade Firmware window will appear. Select “Device firmware” and click
“Next”
7. A list of available firmware will appear. If the correct version is listed, click
“Next”, and the upgrade process will start.
NOTE: If the correct firmware version does not appear within the list, you will need to
manually upload it into WJA. New firmware may be available on an FTP site prior to
appearing on hp.com. The instructions below allow you to upload a RFU file from your
local PC to WJA 10.2 SR4 or newer
Uploading new firmware files into WJA:

1. Click on “Firmware/Firmware Repository” in the “Device Management” pane
2. A “Firmware Repository” window will appear in the center of the screen
3. Click on “Upload” in the upper-right of the window
4. Browse to the .bdl file on your local PC
5. Click “Upload”
6. Once the .bdl file is uploaded, go back to step 2 in the first section and complete
steps 2 through 6.
NOTE: Do not turn printer off during the update process! When the update process is
complete, the printer will automatically reboot. If the firmware update process fails, Web
JetAdmin will provide notification with a page (screen) of information regarding the
reason(s) for failure. A link will be provided to attempt the process again.
FutureSmart Level Switching Procedures
Click here for the - HP FutureSmart Level Switching White Paper
Embedded Web Server (EWS)

Please visit the following link to a view video on this firmware Level Switching
method explained below. YouTube address: http://youtu.be/Cdn8AKj75vc
1. Open an Internet Browser Window.

2. Enter the IP address of the device in the URL line.
3. Select the Firmware Upgrade link from with the General tab.
4. If you do not see the Change HP FutureSmart Level section you will
need to update the firmware to a version of firmware that supports level
switching.
5. Choose the level of firmware you want the device to be on and then click
the Change button.
6. On the Confirmation window click Change again and the device will
reboot.
7. Once the device is back online, print a Configuration Page and verify that
the new firmware level has been installed.
Device Control Panel

Please visit the following link to a view video on this firmware Level Switching
method explained below. YouTube address: http://youtu.be/59ZmHL2lUEI
1) Scroll to the Device Maintenance menu on the control panel. On non-touch

sensitive screens, you will need to press the Home button and then scroll down
and select the Device Maintenance menu.
2) Select the HP FutureSmart Level menu.
3) Select the HP FutureSmart Level version number (i.e. FutureSmart Level 3 or
Future Level 4)
4) Select the Change button.
5) On the Confirmation window select Change again and the device will reboot.
6) Once the device is back online, print a Configuration Page and verify that
the new firmware level has been installed.
Web Jet Admin

Please visit the following link to a view video on this firmware Level Switching method
explained below. YouTube address: http://youtu.be/_XRUoNTjtfM
1. With HP Web JetAdmin 10.3 SR4, you can view the current HP FutureSmart level
and change the HP FutureSmart level if the device has HP FutureSmart 3 or later
installed.
2. Non-HP FutureSmart devices always display Not Supported for the HP FutureSmart
level.
3. HP FutureSmart devices display a value instead of Not Supported if they have at
least HP FutureSmart 3 installed and if a selection for the HP FutureSmart level can
be made. For example, when the HP LaserJet M806 device was introduced, HP
FutureSmart Level 3 was available and was the initial firmware for the device. The
device cannot be set to a lower version. Therefore, HP Web JetAdmin shows Not
Supported for the HP FutureSmart level of this device until a newer version is
installed on the device.
4. The FutureSmart Level configuration option is available from the Device category
on the Config tab
5. Use the FutureSmart Level configuration option to specify a number for the HP
FutureSmart level that is available in the firmware that is currently installed on the
device.
6. HP Web Jetadmin displays the range of HP FutureSmart levels that the device
supports. If you enter a number outside of the range that the device supports, HP
Web Jetadmin automatically changes the version number to the nearest minimum
or maximum level that the device supports.
7. After changing the HP FutureSmart level, the device restarts automatically.
System Requirements
The Firmware upgrade process requires a network or USB port connection.
Technical Assistance
Some of the services below are provided for the United States only. Similar services to
those listed below are available in other countries. See your printer's user guide or call
your local authorized HP dealer.
Customer Support
See your printer's user guide or call your local authorized HP dealer.
Internet
An anonymous FTP library service is available worldwide for around-the-clock-access to
drivers and technical support information for HP peripheral and computer products.
Please note that paths may change without notice. Access the Internet or FTP address and
use the menus to locate the software or support of your choice.
URL for HP LaserJet Enterprise M600 Series Support:

URL for Firmware downloads:
www.hp.com/go/lj600Series_firmware
URL for Support:
http://www.hp.com/go/support
URL for Access HP: http://www.hp.com

FTP address: ftp.hp.com
Login: anonymous
Password: your Internet email address
Additional Information
Refer to your printer's user guide for additional methods of obtaining software and support
information, such as printer driver distribution centers other online services, fax services,
and other online support.
Legal Statements
Trademark Notices
MS-DOS, Windows, Windows 2000, Excel 2000, Microsoft Office, Windows Server
2003, Outlook, PScript and Internet Explorer are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
PostScript is a registered trademark of Adobe Systems Incorporated.
Quark and QuarkXpress are trademarks of Quark Inc.
Mac, Macintosh and Safari are registered trademarks of Apple Computer, Inc.
The Adobe logo, Acrobat, the Adobe PDF logo, Distiller, and Reader are either registered
trademarks or trademarks of Adobe Systems Incorporated in the United States and/or
other countries.
Novell is a registered trademark of Novell, Inc., in the United States and other countries.
Netscape Navigator, is a registered trademark of Netscape Communications Corporation
in the United States and other countries.
OPEN-SOURCE SOFTWARE LICENSE AGREEMENTS (In English)

http://h41302.www4.hp.com/km/saw/view.do?docId=emr_na-
c03314740&hsid=38411199
License and Copyright

© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties
for HP products and services are set forth in the express warranty statements
accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors
or omissions contained herein

Readme ljM601 602 603 fs3

Uploaded by

Copyright:

Available Formats

Readme ljM601 602 603 fs3

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Readme ljM601 602 603 fs3

Uploaded by

Copyright:

Available Formats

LASERJET ENTERPRISE M601/M602/M603 PRINTER SERIES Firmware

Product Name(s): HP LaserJet M601n • HP LaserJet M601dn

This document contains information for the firmware revision number:

Enhancements and Fixes provided with this firmware revision

FutureSmart Level Switching Procedures

What is included in a Firmware bundle?

Who needs this firmware?

To determine the current level of firmware installed on the device:

Firmware Datecode: 20110811

Enhancements and Fixes provided with this Firmware

For information on HP Security Bulletins addressed by firmware releases, please

➢ Updated the JQuery version.

➢ Updated the network stack.

Current firmware revisions included in this firmware bundle:

DEVICE FIRMWARE REVISION

Enhancements and Fixes provided with this Firmware revision

For information on HP Security Bulletins addressed by firmware releases, please visit:

Current firmware revisions included in this firmware bundle:

Enhancements and Fixes provided with this Firmware revision

For information on HP Security Bulletins addressed by firmware releases, please visit:

Current firmware revisions included in this firmware bundle:

Enhancements and Fixes provided with this Firmware revision

For information on HP Security Bulletins addressed by firmware releases, please visit:

Current firmware revisions included in this firmware bundle:

Enhancements and Fixes provided with this Firmware revision

➢ CVE-2019-6334 - Solution application signature checking may allow potential

Current firmware revisions included in this firmware bundle:

Enhancements and Fixes provided with this Firmware revision

➢ New security check will prevent installation of non-compliant aftermarket solution

Current firmware revisions included in this firmware bundle:

➢ CVE-2018-5923 : Insecure Solution DLL Signature Validation.

Current firmware revisions included in this firmware bundle:

Enhancements and Fixes provided with this Firmware revision

➢ When printing from Mac OS High Sierra, error "undefinedresult, OFFENDING

Current firmware revisions included in this firmware bundle:

Enhancements and Fixes provided with this Firmware revision

➢ Users now have the ability to disable printing from Help.

➢ Fixed "IP Address/Subnet is out of range. Check the field. IP=x.x.x.x

Current firmware revisions included in this firmware bundle:

Enhancements and Fixes provided with this Firmware revision

➢ This firmware addresses the following security issues: CVE-2017-11103 - Heimdal

➢ This firmware addresses the following security issues: CVE-2017-9765 - Integer

Current firmware revisions included in this firmware bundle:

Enhancements and Fixes provided with this Firmware revision

Current firmware revisions included in this firmware bundle:

Enhancements and Fixes provided with this Firmware revision

➢ Functionality of the TCP MSS settings in Telnet has been restored.

Current firmware revisions included in this firmware bundle:

Enhancements and Fixes provided with previous Firmware revision

This firmware addresses the following security issue:

Current firmware revisions included in this firmware bundle:

Enhancements and Fixes provided with this Firmware revision

Current firmware revisions included in this firmware bundle:

Enhancements and Fixes provided with this Firmware revision

Current firmware revisions included in this firmware bundle:

Enhancements and Fixes provided with previous Firmware revision

Current firmware revisions included in this firmware bundle:

Enhancements and Fixes provided with this Previous Firmware revision

➢ Added the ability to view the "ProductNumber" and "LookAndFeelId" attributes in