Anthony Wanjiku Revised Structural
Anthony Wanjiku Revised Structural
Anthony Wanjiku Revised Structural
GENERAL NOTES D _ STAIRCASE _ 20mm 8. FOUNDATION DEPTHS TO BE FIXED BY THE ENGINEER AND P.M
1. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH
RELEVANT ARCHITECTURAL DRAWINGS AND ANY
DISCREPANCY REFERRED TO THE ENGINEER.
A _ BLINDING CLASS 15 (1:4:8 )
B _ SLAB & BEAMS AND COLUMNS CLASS 20 (1:1:2 )
C _ BEAMS AND SLAB CLASS 25 (1:11 : 3)
2
E _ BEAMS
F _ SLABS
_ 25mm
_ 20mm
MAXIMUM TOLERANCE TO CONCRETE COVERS IS + 5mm
SHALL NOT BE BLINDED BEFORE HIS APPROVAL.
9. LAPS TO ALL BARS TO BE 50 x DIAMETER OF THE BAR.
10. ALL REINFORCEMENT BARS TO BE CUT ON
PROPOSED RESIDENTIAL MAISONETTE ON STRUCTURAL
ANTHONY WANJIKU
O.P
AS SHOWN
2. ALL DIMENSIONS ARE IN MILLIMETRES. 5. UNLESS OTHERWISE SHOWN CONCRETE COVERS
TO MAIN REINFORCEMENTS SHALL BE AS FOLLOWS:-
6. ALL REINFORCEMENT BARS TO BE IN ACCORDANCE WITH
B.S. 4449 AND MESH FABRIC TO BE MADE FROM COLD WORKED
CONFIRMING THE DIMENSIONS AND ANY
DIFFICULTY REFERRED TO THE ENGINEER. LAND PARCEL No. ESCARPMEMENT JET DETAILS MARCH 2024
P.O BOX
3. DO NOT SCALE THIS DRAWING USE INDICATED DIMENSIONS. P'J NO. DWG NO.
A _ FOUNDATIONS_ 40mm
STEEL BARS IN ACCORDANCE WITH B.S. 4483. 11. ALL PLACEMENTS TO BE INSPECTED BY THE
4. UNLESS OTHERWISE STATED CONCRETE MIX SHALL
BE AS FOLLOWS:-
B _ BASES
C _ COLUMNS
_ 40mm
_ 30mm
7. SAFE BEARING CAPACITY IS TAKEN AS 500N/mm2 i.e. SUB- SOIL
IS TAKEN AS ROCK.
ENGINEER AND SHALL NOT BE CONCRETED
BEFORE HIS APPROVAL. SCHEME/73 LARI - KIAMBU COUNTY. 024/062 01