QUIZZES: CHAPTER 01

The _______ model is the basis for today’s computers.

a Leibnitz
b von Neumann
c Pascal
d Charles Babbage
Correct Answer _

In a computer, the _______ subsystem stores data and programs.

a ALU
b input/output
c memory
d control unit
Correct Answer _

In a computer, the _______ subsystem performs calculations and logical operations.

a ALU
b input/output
c memory
d control unit
Correct Answer _

In a computer, the _______ subsystem accepts data and programs and sends processing
results to output devices.
a ALU
b input/output
c memory
d control unit
Correct Answer _

In a computer, the _______ subsystem serves as a manager of the other subsystems.

a ALU
b input/output
2

c memory
d control unit
Correct Answer _

According to the von Neumann model, _______ are stored in memory.

a only data
b only programs
c data and programs
d neither data nor programs
Correct Answer _

A step-by-step solution to a problem is called _______.

a hardware
b an operating system
c a computer language
d an algorithm
Correct Answer _

FORTRAN and COBOL are examples of _______.

a hardware
b operating systems
c computer languages
d algorithms
Correct Answer _

A 17th-century computing machine that could perform addition and subtraction was
the _______.
a Pascaline
b Jacquard loom
c Analytical Engine
d Babbage machine
Correct Answer _
 3

_______ is a set of instructions in a computer language that tells the computer what to
do with data.
a An operating system
b An algorithm
c A data processor
d A program
Correct Answer _

_______ is the design and writing of a program in structured form.

a Software engineering
b Hardware engineering
c Algorithm development
d Instructional architecture
Correct Answer _

The first electronic special-purpose computer was called _______.

a Pascal
b Pascaline
c ABC
d ENIAC
Correct Answer _

One of the first computers based on the von Neumann model was called _______.
a Pascal
b Pascaline
c ABC
d EDVAC
Correct Answer _

The first computing machine to use the idea of storage and programming was called
_______.
a the Madeline
b EDVAC
c the Babbage machine
4

d the Jacquard loom

Correct Answer _

_______ separated the programming task from computer operation tasks.

a Algorithms
b Data processors
c High-level programming languages
d Operating systems
Correct Answer _

QUIZZES: CHAPTER 02
The base of the decimal number system is ____.
a 2
b 8
c 10
d 16
Correct Answer: _

The base of the binary number system is ____.

a 2
b 8
c 10
d 16
Correct Answer: _

The base of the octal number system is ____.

a 2
b 8
c 10
d 16
Correct Answer: _
 5

The base of the hexadecimal number system is ____.

a 2
b 8
c 10
d 16
Correct Answer: _

When converting a decimal integer to base b, we repeatedly _____ b.

a divide
a by
b multiply
b by
c add to
d subtract from
Correct Answer: _

When converting a decimal fraction to base b, we repeatedly ____b.

a divide
a by
b multiply
b by
c add to
d subtract from
Correct Answer: _

Which of the following representations is erroneous?

a (10111)2
b (349)8
c (3AB)16
d 256
Correct Answer: _

Which of the following representations is erroneous?

a (10211)2
6

b (342)8
c (EEE)16
d 145
Correct Answer: _

Which of the following representations is erroneous?

a (111)2
b (346)8
c (EEG)16
d 221
Correct Answer: _
Which of the following representations is erroneous?
a (110)2
b (141)8
c (EF)16
d 22A
Correct Answer: _

Which of the following is equivalent to 12 in decimal?

a (1110)2
b _16
c (15)8
d None of the above
Correct Answer: _

Which of the following is equivalent to 24 in decimal?

a (11000)2
b (1A)16
c (31)8
d None of the above
Correct Answer: _
 7

QUIZZES: CHAPTER 03
A byte consists of _______ bits.
a 2
b 4
c 8
d 16
Correct Answer: _

In a set of 64 symbols, each symbol requires a bit pattern length of _______ bits.
a 4
b 5
c 6
d 7
Correct Answer: _

How many symbols can be represented by a bit pattern with ten bits?
a 128
b 256
c 512
d 1024
Correct Answer: _

If the ASCII code for E is 1000101, then the ASCII code for e is _______. Answer the
question without consulting the ASCII table.
a 1000110
b 1000111
c 0000110
d 1100101
Correct Answer: _

A 32-bit code called _______ represents symbols in all languages.

a ANSI
b Unicode
8

c EBCDIC
d Extended ASCII
Correct Answer: _

An image can be represented in a computer using the _______ method.

a bitmap graphic
b only vector graphic
c Only Excess system
d Only either bitmap or vector graphic
Correct Answer: _

In the _______ graphic method of representing an image in a computer, each pixel is

assigned a bit patterns.
a bitmap
b vector
c quantized
d binary
Correct Answer: _

In the _______ graphic method of representing an image in a computer, the image is

decomposed into a combination of geometrical figures.
a bitmap
b vector
c quantized
d binary
Correct Answer: _

In the _______ graphic method of representing an image in a computer, re-scaling of

the image creates a ragged or grainy image.
a bitmap
b vector
c quantized
d binary
Correct Answer: _
 9

When we want to store music in a computer, the audio signal must be _______.
a sampled only
b quantized only
c coded only
d sampled, quantized, and coded
Correct Answer: _

A floating-point value after normalization is (1.0101) ´ 2-4.

What is the value of exponent section in the Excess-127 representation?
a 4
b -4
c 127
d 123
Correct Answer: _

Assume a new Excess system uses 17 bits to represent the exponent section. What is
he bias value in this system?
a 17
b 16
c 65535
d 65536
Correct Answer: _

Which number representation method is often used to store the exponential value of a
fractional part?
a unsigned integers
b two’s complement
c Excess
d ten’s complement
Correct Answer: _

In an Excess conversion, we _______ the number to be converted.

a add the bias number to
10

b subtract the bias number from

c multiply the bias number by
d divide the bias number by
Correct Answer: _

When a fractional part is normalized, the computer stores the _______.

a only the sign
b only the exponent
c only the mantissa
d the sign, exponent, and mantissa
Correct Answer: _

The precision of the fractional part of a number stored in a computer is defined by the
_______.
a sign
b exponent
c mantissa
d last digit
Correct Answer: _

The combination of sign and mantissa of a real number in IEEE standard floating
point format is stored as an integer in the ____________ representation.
a unsigned
b sign-and-magnitude
c two’s complement
d one’s complement
Correct Answer: _

QUIZZES: CHAPTER 04
_______ is an arithmetic operation.
a The exclusive OR
 11

b The unary NOT

c Subtraction
d The binary AND
Correct Answer: _

_______ is a logical bit operator.

a The exclusive OR
b The unary NOT
c The binary AND
d exclusive OR, unary NOT, or binary AND
Correct Answer: _

The _______ method of integer representation is the most common method for storing
integers in computer memory.
a sign-and-magnitude
b one’s complement
c two’s complement
d unsigned integers
Correct Answer: _

In two’s complement addition, if there is a final carry after the left most column
addition, _______.
a add it to the right most column
b add it to the left most column
c discard it
d increase the bit length
Correct Answer: _

For an 8-bit allocation, the smallest decimal number that can be represented in two’s
complement form is _______.
a -8
b -127
c -128
d -256
12

Correct Answer: _

For an 8-bit allocation, the largest decimal number that can be represented in two’s
complement form is _______.
a 8
b 127
c 128
d 256
Correct Answer: _

In two’s complement representation with a 4-bit allocation, we get _______ when we

add 1 to 7.
a 8
b 1
c -7
d -8
Correct Answer: _

In two’s complement representation with a 4-bit allocation, we get _______ when we

add 5 to 5.
a -5
b -6
c -7
d 10
Correct Answer: _

If the exponent in Excess_127 is binary 10000101, the exponent in decimal is

_______.
a 6
b 7
c 8
d 9
Correct Answer: _
 13

If we are adding two numbers, one of which has an exponent value of 7 and the other
an exponent value of 9, we need to shift the decimal point of the smaller number
_______.
a one place to the left
b one place to the right
c two places to the left
d two places to the right
Correct Answer: _

_______ operator (s) takes two inputs to produce one output.

a Only AND
b Only OR
c Only XOR
d AND, OR, or XOR
Correct Answer: _

The unary _______ operator inverts its single input.

a AND
b OR
c NOT
d XOR
Correct Answer: _

_______ operator (s), if the input is two 0s, the output is 0.

a In only AND
b In only OR
c In only XOR
d In AND, OR, or XOR
Correct Answer: _

_______ operator (s), if the input is two 1s, the output is 0.

a In only AND
b In only OR
c In only XOR
14

d In AND, OR, or XOR

Correct Answer: _

For the binary AND operation, only an input of _______ gives an output of 1.
a two 0s
b two 1s
c one 0 and one 1
d two 2s
Correct Answer: _

For the binary OR operation, only an input of _______ gives an output of 0.

a two 0s
b two 1s
c one 0 and one 1
d two 2s
Correct Answer: _

We use a bit pattern called a _______ to modify another bit pattern.

a mask
b carry
c float
d byte
Correct Answer: _

To flip all the bits of a bit pattern, make a mask of all 1s and then _______ the bit
pattern and the mask.
a AND
b OR
c XOR
d NOT
Correct Answer: _

To un-set (force to 0) all the bits of a bit pattern, make a mask of all 0s and then
_______ the bit pattern and the mask.
 15

a AND
b OR
c XOR
d NOT
Correct Answer: _

To set (force to 1) all the bits of a bit pattern, make a mask of all 1s and then _______
the bit pattern and the mask.
a AND
b OR
c XOR
d NOT
Correct Answer: _

QUIZZES: CHAPTER 05
The _______ is a computer subsystem that performs operations on data.
a CPU
b memory
c I/O hardware
d bus subsystem
Correct Answer: _

_______ is a stand-alone storage location that holds data temporarily.

a An ALU
b A register
c A control unit
d A tape drive
16

Correct Answer: _

_______ is a unit that can add two inputs.

a An ALU
b A register
c A control unit
d A tape drive
Correct Answer: _

A register in a CPU can hold _______.

a only data
b only instructions
c only program counter values
d data, instruction, or program counter values
Correct Answer: _

A control unit with five wires can define up to _______ operations.

a 5
b 10
c 16
d 32
Correct Answer: _

A word can be _______ bits.

a only 8
b only 16
c only 32
d 8, or 16, or 32
Correct Answer: _

If the memory address space is 16 MB and the word size is 8 bits, then _______ bits
are needed to access each word.
a 8
b 16
 17

c 24
d 32
Correct Answer: _

The data in _______ is erased if the computer is powered down.

a RAM
b ROM
c a tape drive
d a CD-ROM
Correct Answer: _

_______ is a memory type with capacitors that need to be refreshed periodically.

a SRAM
b DRAM
c ROM
d CROM
Correct Answer: _

_______ is a memory type with traditional flip-flop gates to hold data.

a SRAM
b DRAM
c ROM
d CROM
Correct Answer: _

There are _______ bytes in 16 Terabytes.

a 216
b 240
c 244
d 256
Correct Answer: _

_______ can be programmed and erased using electronic impulses but can remain in a
computer during erasure.
18

a ROM
b PROM
c EPROM
d EEPROM
Correct Answer: _

_______ is a type of memory in which the user, not the manufacturer, stores programs
that cannot be overwritten.
a ROM
b PROM
c EPROM
d EEPROM
Correct Answer: _

Main memory in a computer usually consists of large amounts of ______ speed

memory.
a high
b medium
c low
d very high speed
Correct Answer: _

A _______ is a storage device to which the user can write information only once.
a CD-ROM
b CD-R
c CD-RW
d CD-RR
Correct Answer: _

A _______ is a storage device that can undergo multiple writes and erasures.
a CD-ROM
b CD-R
c CD-RW
d CD-RR
 19

Correct Answer: _

The smallest storage area on a magnetic disk that can be accessed at one time is a
_______.
a track
b sector
c frame
d head
Correct Answer: _

If the memory has 232 words, the address bus needs to have _______ wires.
a 8
b 16
c 32
d 64
Correct Answer: _

A control bus with eight wires can define _______ operations.

a 8
b 16
c 256
d 512
Correct Answer: _

A _______ controller is a high-speed serial interface that transfers data in packets.

a SCSI
b USB
c FireWire
d USB and FireWire
Correct Answer: _

The three steps in the running of a program on a computer are performed in the
specific order _______.
a fetch, execute, and decode
20

b decode, execute, and fetch

c fetch, decode, and execute
d decode, fetch, and execute
Correct Answer: _

In the _______ method for synchronizing the operation of the CPU with an I/O
device, the I/O device informs the CPU when it is ready for data transfer.
a programmed I/O
b interrupt-driven I/O
c DMA
d isolated I/O
Correct Answer: _

In the _______ method for synchronizing the operation of the CPU with an I/O
device, the CPU is idle until the I/O operation is finished.
a programmed I/O
b interrupt-driven I/O
c DMA
d isolated I/O
Correct Answer: _

In the _______ method for synchronizing the operation of the CPU with an I/O
device, a large block of data can be passed from an I/O device to memory directly.
a programmed I/O
b interrupt-driven I/O
c DMA
d isolated I/O
Correct Answer: _

QUIZZES: CHAPTER 06
The TCP/IP model has _______ layers.
a five
 21

b six
c seven
d eight
Correct Answer: _

The _______ layer of the TCP/IP protocol suite provides services for end users.
a data-link
b transport
c application
d physical
Correct Answer: _

The _______ layer of the TCP/IP protocol suite transmits a bit stream over a physical
medium.
a physical
b data-link
c network
d transport
Correct Answer: _

The _______ layer of the TCP/IP protocol suite is responsible for node-to-node
delivery of a frame between two adjacent nodes.
a transport
b network
c data-link
d session
Correct Answer: _

The _______ layer of the TCP/IP protocol suite is responsible for source-to-
destination delivery of the entire message.
a transport
b network
c data-link
d session
22

Correct Answer: _

What is the domain name in the e-mail address [email protected]?

a kayla
b [email protected]
c nasa.gov
d gov
Correct Answer: _

Which physical topology uses a hub or switch?

a bus
b ring
c star
d bus and ring
Correct Answer: _

IP addresses are currently _______ bits in length.

a 4
b 8
c 32
d 40
Correct Answer: _

_______ protocol (s) is one of the protocols in the transport layer.

a Only TCP
b Only UDP
c Only SCTP
d TCP, UDP, and SCTP
Correct Answer: _

_______ is a protocol for file transfer.

a FTP
b SMTP
 23

c TELNET
d HTTP
Correct Answer: _

_______ is a protocol for e-mail services.

a FTP
b SMTP
c TELNET
d HTTP
Correct Answer: _

_______ is a protocol for accessing and transferring documents on the WWW.

a FTP
b SMTP
c TELNET
d HTTP
Correct Answer: _

QUIZZES: CHAPTER 07
_______ is a program that facilitates the execution of other programs.
a An operating system
b Hardware
24

c A queue
d An application program
Correct Answer: _

_______ supervises the activity of each component in a computer system.

a An operating system
b Hardware
c A queue
d An application program
Correct Answer: _

Multi-programming requires a _______ operating-system.

a batch
b time-sharing
c parallel
d distributed
Correct Answer: _

_______ is multi-programming with swapping.

a Partitioning
b Paging
c Demand paging
d Queuing
Correct Answer: _

_______ is multi-programming without swapping.

a Partitioning
b Virtual memory
c Demand paging
d Queuing
Correct Answer: _

In _______, only one program can reside in memory for execution.

a mono-programming
 25

b multi-programming
c partitioning
d paging
Correct Answer: _

_______ is a multi-programming method in which multiple programs are entirely in

memory with each program occupying a contiguous space.
a Partitioning
b Paging
c Demand paging
d Demand segmentation
Correct Answer: _

In paging, a program is divided into equally sized sections called _______.

a pages
b frames
c segments
d partitions
Correct Answer: _

In _______, the program can be divided into differently sized sections.

a partitioning
b paging
c demand paging
d demand segmentation
Correct Answer: _

In _______, the program can be divided into equally sized sections called pages, but
the pages need not be in memory at the same time for execution.
a partitioning
b paging
c demand paging
d demand segmentation
Correct Answer: _
26

A process in the _______ state can go to either the ready, terminated, or waiting
states.
a hold
b virtual
c running
d hold or running
Correct Answer: _

A process in the ready state goes to the running state when _______.
a it enters memory
b it requests I/O
c it gets access to the CPU
d it finishes running
Correct Answer: _

A program becomes a _______ when it is selected by the operating system and

brought to the hold state.
a job
b process
c deadlock
d partition
Correct Answer: _

Every process is _______.

a only a job
b only a program
c only a partition
d a job and a program
Correct Answer: _

The _______ scheduler creates a process from a job and changes a process back to a
job.
a job
b process
 27

c virtual
d queue
Correct Answer: _

The _______ scheduler moves a process from one process state to another.
a job
b process
c virtual
d queue
Correct Answer: _

To prevent _______, an operating system can put resource restrictions on processes.

a starvation
b synchronization
c paging
d deadlock
Correct Answer: _

_______ can occur if a process has too many resource restrictions.

a Starvation
b Synchronization
c Paging
d Deadlock
Correct Answer: _

The _______ manager is responsible for archiving and backup.

a memory
b process
c device
d file
Correct Answer: _

The _______ manager is responsible for access to I/O devices.

a memory
28

b process
c device
d file
Correct Answer: _

QUIZZES: CHAPTER 08
_______ is a step-by-step method for solving a problem or doing a task.
a A construct
b A recursion
c An iteration
d An algorithm
Correct Answer: _

There are ______ basic constructs in computer -science.

a one
b two
c three
d four
Correct Answer: _

The _______construct tests a condition.

a sequence
b decision
c repetition
d flow
Correct Answer: _

The _______ construct uses a set of actions one after another.

a sequence
 29

b decision
c repetition
d flow
Correct Answer: _

The _______ construct handles repeated actions.

a sequence
b decision
c repetition
d flow
Correct Answer: _

_______ is a pictorial representation of an algorithm.

a A UML diagram
b A program
c Pseudocode
d An algorithm
Correct Answer: _

_______ is an English-language-like representation of code.

a A UML diagram
b A program
c Pseudocode
d An algorithm
Correct Answer: _

_______ is a basic algorithm that adds a list of numbers.

a Summation
b Product
c Smallest
d Largest
Correct Answer: _

_______ is a basic algorithm that multiplies a list of numbers.

30

a Summation
b Product
c Smallest
d Largest
Correct Answer: _

_______ is a basic algorithm that arranges data according to its value.

a Inquiry
b Sorting
c Searching
d Recursion
Correct Answer: _

The items are divided into two lists (sorted and unsorted) _____ sort.
a only in a selection
b only in a bubble
c only in an insertion
d in selection, bubble, or insertion
Correct Answer: _

In _______ sort, the item that goes into the sorted list is always the first item in the
unsorted list.
a selection
b bubble
c insertion
d every
Correct Answer: _

In _______ sort, the smallest item from the unsorted list is swapped with the item at
the beginning of the unsorted list.
a selection
b bubble
c insertion
d every
 31

Correct Answer: _

In ______ sort, the smallest item moves to the beginning of the unsorted list. There is
no one-to-one swapping.
a selection
b bubble
c insertion
d every
Correct Answer: _

_______ is a basic algorithm in which we want to find the location of a target in a list
of items.
a Sorting
b Searching
c Product
d Summation
Correct Answer: _

We use a _______ search for an unordered list.

a sequential
b binary
c bubble
d insertion
Correct Answer: _

We use a _______ search for an ordered list.

a sequential
b binary
c bubble
d insertion
Correct Answer: _

_______ is a process in which an algorithm calls itself.

a Insertion
32

b Searching
c Recursion
d Iteration
Correct Answer: _

QUIZZES: CHAPTER 09
The only language understood by computer hardware is a _______ language.
a machine
b symbolic
c high-level
d natural
Correct Answer: _

C, C++, and Java can be classified as _______ languages.

a machine
b symbolic
c high-level
d natural
Correct Answer: _

FORTRAN is a(n) _______ language.

a procedural
b functional
c declarative
 33

d object-oriented
Correct Answer: _

Pascal is a(n) _______ language.

a procedural
b functional
c declarative
d object-oriented
Correct Answer: _

Java is a(n) _______ language.

a procedural
b functional
c declarative
d object-oriented
Correct Answer: _

LISP is a(n) _______ language.

a procedural
b functional
c declarative
d object-oriented
Correct Answer: _

_______ is a common language in the business -environment.

a FORTRAN
b C++
c C
d COBOL
Correct Answer: _

_______ is a popular object-oriented language.

a FORTRAN
b COBOL
34

c Java
d LISP
Correct Answer: _

A _______ program can be either an application or an applet.

a FORTRAN
b C++
c C
d Java
Correct Answer: _

LISP and Scheme are both _______ languages.

a procedural
b functional
c declarative
d object-oriented
Correct Answer: _

Prolog is an example of a(n) _______ language.

a procedural
b functional
c declarative
d object-oriented
Correct Answer: _

QUIZZES: CHAPTER 10
One phase in system development is _______.
 35

a analysis
b application
c designing
d collecting
Correct Answer: _

Defining the users, requirements, and methods is part of the _______ phase.
a analysis
b design
c implementation
d testing
Correct Answer: _

In the system development process, writing the program is part of the _______ phase.
a analysis
b design
c implementation
d testing
Correct Answer: _

In the system development process, structure charts are tools used in the _______
phase.
a analysis
b design
c implementation
d testing
Correct Answer: _

Testing a software system can involve _______ testing.

a black-box
b glass-box
c neither black-box nor glass-box
d both black-box and glass-box
Correct Answer: _
36

_______ is the breaking up of a large project into smaller parts.

a Coupling
b Incrementing
c Obsolescence
d Modularization
Correct Answer: _

_______ is a measure of how tightly two modules are bound to each other.
a Modularity
b Coupling
c Interoperability
d Cohesion
Correct Answer: _

_________between modules in a software system must be minimized.

a Coupling
b Cohesion
c Neither coupling nor cohesion
d Both coupling and cohesion
Correct Answer: _

_________between modules in a software system must be maximized.

a Coupling
b Cohesion
c Neither coupling nor cohesion
d Both coupling and cohesion
Correct Answer: _
37