How To Check Error Code 52

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Trouble shooting for error 52

Suitable for SAKO inverter: SUNSEE/SUNON/SUNON PLUS/SUNPOLO

Error code 52, Bus voltage is too low

Trouble shooting:

Step 1. Disconnect the load, grid input and solar input. Just connect battery and turn on the inverter.If still
problem, go to step 2.

Step 2. Check the battery voltage, if the battery voltage is too low ( lower than 24v for 3k, and lower than 48v
for 5K.), charge the battery in time. If still problem, go to steps 3.

Step 3. Disconnect all power source,and open the top cover, take out the main board, place the main board
on the insulated tables. Check bus voltage and check the circuit resistance with multimeter . If any damage,
replace them. (See below picture). If ok go to step 4

Step 4. Test the DC-DC MOS and Isolated drive circuit with multimeter, replace the damaged componets (See
as below pictures)
Isolated drive transformer

DC-DC drive circuit

You might also like