Balizas Originales Chinas

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

LS710 Aviation Obstruction Light LS710-C1-V10

Applications:
Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, Towers (Telecom,
GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic
with a steady burning red safety light.

Main fuctions and features:


• Use Fresnel lens, high utilization of light, valid keeping light beam in the scope as required
• Based on LED technology, low power consumption, and high efficiency
• Die casting aluminum enclosure with powder-coat paint finishes, providing corrosion
resistance and durability
• Extremely Reliable – Major Maintenance Cost Saving
• G3/4”pipe is available, ease of mount
• EMC Compliance, No RF Radiation
Mounting dimension ( unit:mm) • Self-contained compartment, with stainless steel wire which is used to secure the unit
against falling in operation, and ease of mount
• Lamp housing – Polycarbonate, with good anti-impact strength, thermal stability, high
transmittance
• Built-in photocell can switch ON/OFF the light at dawn and dusk (optional)
• Steady burning or flashing type (no need external controller).
Specification
Compliant to the
Standard ICAO(Aerodromes Annex 14) and Vertical degree ≥10°
FAA-L810

Horizontal
Light source LED 360°
degree

Steady burning or
LED color Aviation red Flashing rate flashing(flashing rate
can be selected)

Operating
AC110V~AC240V(Option:DC48V) LED life ≥100,000h
voltage
Applications
Power
6W On/off level 500Lux
consumption

Intensity ≥32.5cd

Operating
-30˚C ~ +70˚C IP Protection IP65
temperature

Relative
10% ~ 95% (no condensing) Weight 1.0kg
humidity

Material Base:Die casting aluminum, housing: PC

Installation and operation


• Check whether the supply voltage does comply with the rated voltage of the lamp (Pay
attention to the polarity in case of DC voltage).
• Insert the power cable through the bottom of lamp holder, and connect them to the
terminals in the base respectively
• Select the flashing mode as required

Shanghai Nanhua Electronics Co.,Ltd Tel:+86 021-39126868 Fax:+86 021-39126868ext 808/818 Web:www.nanhua.com E-mail:[email protected] Add::Building 9, No. 1755 Wenbei Rd, Jiading
district Shanghai 201802

All rights reserved by Nanhua, without the written authorization of Nanhua, any part thereof shall not be reproduced or transmitted in any form, 1/1
LS710 Aviation Obstruction Light LS710-C1-V10
Applications

• Tighten the screws between lamp housing and base


• Screw the lamp on the G3/4” ( G1”) threaded pipe, which should be fixed on a
smooth surface with enough mechanical strength. Or you can select our mounting
bracket: PJ024, PJ028 and PJ030 (installing diagram), special bracket can be customized.
• Verify whether the power cables are well connected before power on.

Wiring diagram

Wiring diagram for DC power Wiring diagram for AC power

Installing diagram

LS710
LS710

PJ024

PJ028

LS710+PJ024 LS710+PJ028

LS710

PJ030

LS710+PJ030

Shanghai Nanhua Electronics Co.,Ltd Tel:+86 021-39126868 Fax:+86 021-39126868ext 808/818 Web:www.nanhua.com E-mail:[email protected] Add::Building 9, No. 1755 Wenbei Rd, Jiading
district Shanghai 201802

All rights reserved by Nanhua, without the written authorization of Nanhua, any part thereof shall not be reproduced or transmitted in any form, 2/2

You might also like