alchimica.
com
Page 1/4
HYPERDESMO®-ADY-E WHITE
One-component, semi-glossy, aliphatic, elastic polyurethane
Top Coat.
DESCRIPTION -40 oC,
HYPERDESMO®-ADY-E WHITE is a one- excellent heat and ultraviolet/UV resistance, it
component polyurethane coating, that contains will not yellow, peel or soften up to 80 oC,
specialty inorganic fillers that offer superior hiding outstanding resistance to chemicals and
power. This allows minimal consumption of mechanical stresses (high tensile strength and
material and also omitting of a second coat (in abrasion resistance),
cases of simple UV protection not traffic
resistance) resulting in overall cost reduction. The APPLICATION PROCEDURE
material is based on the very successful product Clean the surface using a high pressure washer, if
HYPERDESMO-ADY-E so it has similar elastomeric possible. Remove oil, grease and wax
properties with HYPERDESMO products. It is contaminants. Cement laitance, loose particles,
based on pure elastomeric hydrophobic mould release agents, cured membranes, etc.
polyurethane resin, which results in excellent must be removed. Further primer information
mechanical, chemical, thermal, UV and natural available on request. The application surface
element resistance properties. must be dry.
Apply with brush, roller or airless spraying in one Preparation:
or two coats. Minimum consumption per coat: When stirring, take care not to introduce air in the
0.250 kg/m2. fluid, which may result in bubbling on the cured
membrane. Stirring can either be done manually
RECOMMENDED FOR or with a with a low speed (300 rpm) mixer.
Top-coating HYPERDESMO® range of products. A small sediment may form in the pail after
Top-coating flooring applications prolonged storage. This can be homogenized in
the product with mechanical mixing.
LIMITATIONS
Application:
Not recommended for:
Apply with brush, roller or airless spraying in one
Unsound substrates,
or two coats. Do not exceed 48 hours between
application in thick coats.
coats.
FEATURES & BENEFITS
Excellent hiding power even in one coat
Traffic resistant
CONSUMPTION
Strong and uniform adhesion on almost any
0.3-0.5 kg/m2 in one or two coats.
type of surface,
highly hydrophobic,
highly durable when exposed to the natural CLEANING
elements, maintains its elasticity even down to Clean tools and equipment first with paper towels
Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & OHSAS 18001.
HYPERDESMO®-ADY-E WHITE /EE/15-09-16
alchimica.com
Page 2/4
HYPERDESMO®-ADY-E WHITE
and then using SOLVENT-01. Rollers will not be
re-usable. SAFETY INFORMATION
Contains volatile flammable solvents. Apply in
PACKAGING well-ventilated, no smoking areas, away from
5 Kg, 20 Kg naked flames. In closed spaces use ventilators
SHELF LIFE and carbon active masks. Keep in mind that
Can be kept for 12 months minimum in the solvents are heavier than air so they creep on the
original unopened pails in dry places and at floor. The MSDS (Material Safety Data Sheet) is
temperatures of 5-25 oC. Once opened, use as available on request.
soon as possible.
TECHNICAL SPECIFICATIONS
In liquid form (before application):
PROPERTY UNITS METHOD SPECIFICATION
Viscosity (Brookfield) cP ASTM D2196-86, @ 25 oC 400-600
ASTM D1475 / DIN 53217 / ISO 2811,
Specific weight gr/cm3 1.2
@ 20 oC
Tack free time, @ 77 oF (25
oC) & 55% RH
hours - 6-8
Recoat time hours - 24
The cured membrane:
PROPERTY UNITS METHOD SPECIFICATION
Service temperature oC - -40 to 80
Max. temperature short time oC - 200
(shock)
Hardness Shore D ASTM D2240 / DIN 53505 / ISO R868 40
Tensile strength at break @ Kg/cm2
ASTM D412 / EN-ISO-527-3 40
23 oC (N/mm2)
Percent elongation @ 23 oC % ASTM D412 / EN-ISO-527-3 > 300
Water vapor transmission gr/m2.hr ASTM E96 (Water Method) 0.8
Thermal resistance (100
- EOTA TR011 passed
days @ 80 °C)
Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & OHSAS 18001.
HYPERDESMO®-ADY-E WHITE /EE/15-09-16
alchimica.com
Page 3/4
HYPERDESMO®-ADY-E WHITE
QUV Accelerated Weathering
Test (4hr UV, @ 60 oC (UVB- passed
- ASTM G53
Lamps) & 4hr COND @ 50 (2000 hours)
oC)
Hydrolysis (Potassium no significant
Hydroxide 8%, 10 days @ 50 - - elastomeric
oC) property change
no significant
Hydrolysis (Sodium
- - elastomeric
Hypochlorite 5%, 10 days)
property change
Water absorption - - < 1.4%
Stress / Elongation HYPERDESMO®-ADY-E (%)
Tensile Strength (N/mm2)
50
45
40
35
30
25
20
15
10
5
0
0 50 100 150 200 250 300 350
Elongation (%)
ELONGATION CHART: CHEMICAL & HYDROLYTIC RESISTANCE
Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & OHSAS 18001.
HYPERDESMO®-ADY-E WHITE /EE/15-09-16
alchimica.com
Page 4/4
HYPERDESMO®-ADY-E WHITE
HYPERDESMO®-ADY-E, fully cured
Hydrolysis (HCl, PH=2, 2 weeks, RT)
Hydrolysis (KOH, 8%, 15 days @ 50°C)
QUV (1000 hrs).
NONE OF OUR PUBLISHED INSTRUCTIONS AND SPECIFICATIONS,
IN WRITING OR OTHERWISE, ARE BINDING EITHER IN GENERAL
OR WITH RESPECT TO ANY THIRD PARTY RIGHTS, OR DO THEY
RELIEVE INTERESTED PARTIES OF THEIR DUTY TO SUBJECT THE
PRODUCT TO AN ADEQUATE EXAMINATION OF ITS SUITABILITY.
IN NO EVENT WILL ALCHIMICA S.A. BE RESPONSIBLE FOR
DAMAGES OF ANY NATURE, WHATSOEVER, RESULTING FROM THE
USE OF OR RELIANCE UPON INFORMATION OR THE PRODUCT TO
WHICH INFORMATION REFERS.
Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & OHSAS 18001.
HYPERDESMO®-ADY-E WHITE /EE/15-09-16
