Scribd Logo
Upload

Welcome to Scribd!

  • 40 views

    Hm-Pse-Ul DS 081902

    Uploaded by

    Mickie Mayor
    The document describes a photoelectric smoke detector. It provides details on the construction, operation, features and benefits, specifications and listings of the HM-PSE-UL detector. The detector uses photoelectric sensing to detect smoke and connects to a fire alarm control panel to provide early smoke detection.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Hm-Pse-Ul DS 081902

    Uploaded by

    Mickie Mayor
    40 views2 pages
    The document describes a photoelectric smoke detector. It provides details on the construction, operation, features and benefits, specifications and listings of the HM-PSE-UL detector. The detector uses photoelectric sensing to detect smoke and connects to a fire alarm control panel to provide early smoke detection.

    Original Title

    HM-PSE-UL_DS_081902

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes a photoelectric smoke detector. It provides details on the construction, operation, features and benefits, specifications and listings of the HM-PSE-UL detector. The detector uses photoelectric sensing to detect smoke and connects to a fire alarm control panel to provide early smoke detection.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    40 views2 pages

    Hm-Pse-Ul DS 081902

    Uploaded by

    Mickie Mayor
    The document describes a photoelectric smoke detector. It provides details on the construction, operation, features and benefits, specifications and listings of the HM-PSE-UL detector. The detector uses photoelectric sensing to detect smoke and connects to a fire alarm control panel to provide early smoke detection.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Photoelectric Detector

    HM-PSE-UL
    General
    The HM-PSE-UL addressable, low-profile plug-in photoelectric
    detectors use a state-of-the-art photoelectric sensing chamber
    with communications to provide open area protection – used
    exclusively with Fire Alarm Control Panels (FACPs). Since these
    detectors are addressable, they will help emergency personnel
    quickly locate a fire during its early stages, saving precious rescue
    time while also reducing property damage. It comes with two LEDs
    on each sensor light to provide a local, visible sensor indication.

    Applications
    The HM-PSE-UL uses photoelectric detectors in life safety applications
    to provide a broad range of fire-sensing features, especially where
    smoldering fires are anticipated. Ionization detectors are often
    better than photoelectric detectors at sensing fast, flaming fires. HM-PSE-UL

    Construction
    These detectors are constructed of off-white, fire resistant plastic.
    Operation
    HM-PSE-UL plug-in, low-profile smoke detectors are designed
    HM-PSE-UL has a unique unipolar chamber that
    to commercial standards and have an appealing design.
    responds quickly and uniformly to a broad range of
    smoke conditions. It can withstand wind gusts up to
    Installation
    4,000 feet-per-minute (20 m/sec.) without sending
    HM-PSE-UL plug-in detectors use a detachable mounting
    an alarm level signal. Because of its unipolar
    base to simplify installation, service, and maintenance.
    chamber, the HM-PSE-UL is approximately two
    Mount base (all base types) on an electrical backbox which is at least 1.5” times more responsive than most photoelectric
    (3.81 cm) deep. For a chart of compatible junction boxes, see DF-60059. sensor – offering enhanced stability.

    F E AT U R E S & B E N E F I T S

    SLC Loop: Operation: Other System Features:


    • Two-wire SLC loop connection • Withstands air velocities up to • Fully coated circuit boards and
    • Unit uses base for wiring 4,000 feet-per-minute (20 m/sec.) superior RF/transient pro-tection
    without triggering a false alarm • 94-V0 plastic flammability rating
    Addressing:
    • Factory preset at 1.5% nominal sensitivity • Low standby current
    • Addressable by device
    for panel alarm threshold level
    • Rotary, decimal addressing:
    • Visible LED blinks when the unit is
    1- 159 for models SMX and STX addressed (communicating with the fire
    Architecture: panel) and latches on in Alarm mode
    • Unique single-source, dual-chamber Mechanicals:
    design to respond quickly and • Sealed against back pressure
    dependably to a broad range of fires • Direct surface mounting or
    • Sleek, low-profile desig. electrical box mounting
    • Integral communications and • Mounts to: single-gang box, 3.5” (8.89
    built-in type identification cm) or 4.0” (10.16 cm) octagonal box,
    • Built-in tamper-resistant feature or 4.0” (10.16 cm) square electrical
    • Removable cover and insect-resistant box (using a plaster ring — included)
    screen for simple field cleaning
    HM-PSE-UL Technical Specifications
    SPECIFICATION
    Voltage range 15 – 32 VDC (peak)
    Standby current 300 μA @ 24 VDC
    LED current 6.5 mA @ 24 VDC (latched “ON”)
    Air velocity 4,000 ft./min. (20 m/sec.) maximum
    • 2.1” (5.33 cm) high; base determines diameter
    Size
    • B501: 4.1” (10.4 cm) diameter
    Weight 3.6 oz. (102 g)
    Operating temperature range for HM-PSE-UL: 0°C to 49°C (32°F to 120°F)
    Temperature 0°C – 49°C (32°F – 120°F)
    Relative humidity 10% – 93%, non-condensing

    ACCESSORIES

    SMB600 Surface mounting kit

    M02-04-00 Test magnet

    M02-09-00 Test magnet with telescoping handle

    XR2B Detector removal tool. Allows installation and/or removal of detector heads from bases in high ceiling applications

    XP-4 Extension pole for XR2B. Comes in three 5-foot (1.524 m) sections

    T55-127-010 Detector removal tool without pole

    Agency Listings and Approvals Product Line Information


    Listing and approval below apply to the modules specified HM-PSE-UL: Addressable photoelectric detector; B501
    in this. In some cases, certain modules may not be base included
    listed by certain approval agencies, or listing may be in
    process. Consult factory for latest listing status.

    • UL Listed: S36216

    Honeywell Building Technologies ASEAN Honeywell Building Technologies META


    Level 25, UOA Corp Tower B, Avenue 10 Emaar Business Park, Building 2, 2nd Floor
    The Vertical, Bangsar South City Sheikh Zayed Road
    59200, Kuala Lumpur, Malaysia P.O.Box 232362, Dubai, U.A.E.
    Email: [email protected] Phone: +971 4 4505 847

    Honeywell Building Technologies India


    Unitech Trade Centre, 5th Floor
    Sector – 43, Block C, Sushant Lok Phase – 1
    Gurgaon – 122002, Haryana, India
    Email: HoneywellSecurity&[email protected]
    Toll Free: 1-800-103-0339 HM-PSE-UL-DS | Rev 01 | 08/19
    www.honeywell.com © 2019 Honeywell International Inc.

    You might also like