| STANDARD ACCESSORIES

Available to purchase after receiving your order confirmation email.

STANDARD WALL MOUNT

The Starlink Standard Wall Mount is designed for installation on an exterior wall near the top of the gable or fascia.
This wall mount can accommodate a 4” overhang maximum and offers a secure, long-reaching platform to optimize
the placement of your Starlink for the best connectivity and performance.

Crafted from durable, weather-resistant materials, the mount ensures a sturdy and enduring foundation for your
Starlink, capable of withstanding various environmental conditions. Its elongated design allows for greater flexibility
in positioning, enabling easy alignment and adjustment to maximize signal reception.

Easy to install and adjust, the wall mount comes with all necessary hardware and instructions, simplifying the setup
process for a hassle-free experience.

Compatibility:
Starlink Standard, 4” Overhang Maximum

Kit Contents:
Wall Mount, Silicone,
2x Lag Screws, 20x Cable Routing Clips
460 mm
Recommended Tools: (18.1 in)
Drill, 6 mm (1/4 in) Drill Bit,
9/16 in Hex Socket, Marker, Level 246 mm
(10.9 in)
Package Dimensions: 70 mm
280 x 470 x 105 mm (1.1 x 18.5 x 4.1 in) (2.75 in)

Package Weight: 72 mm 155 mm

1.6 kg (3.5 lbs) (2.8 in) (6.1 in)
STANDARD PIVOT MOUNT

The Starlink Standard Pivot Mount is perfect for installation on slanted, shingled roofs. Designed for ease of use and
flexibility, the Pivot Mount swiveling mechanism enables effortless fine-tuning, adapting to various angles and directions,
thus maximizing the performance of your Starlink.

Crafted from durable, weather-resistant materials, the mount ensures a sturdy and enduring foundation for your Starlink,
capable of withstanding various environmental conditions. Its elongated design allows for greater flexibility in positioning,
enabling easy alignment and adjustment to maximize signal reception.

The Pivot Mount is engineered for easy installation and is accompanied by all necessary hardware and user-friendly
instructions, ensuring a hassle-free setup process.

Compatibility:
Starlink Standard

Kit Contents:
Pivot Mount, 2x Sealant Tape Squares,
2x Sealant Tape Strips, 2x Lag Screws,
20x Cable Routing Clips
448 mm
(17.6 in)
Recommended Tools:
Drill, 6 mm (1/4 in) Drill Bit,
9/16 in Hex Socket, Marker, Level 235 mm
(9.25 in) 90°

Package Dimensions:
280 x 470 x 105 mm (1.1 x 18.5 x 4.1 in)

Package Weight: 140 mm 223 mm

1.9 kg (4.2 lbs) (5.5 in) (8.78 in)
STANDARD PIPE ADAPTER MOUNT

The Starlink Standard Pipe Adapter is designed to attach to any existing pole with a minimum diameter of 31 mm (1.25 in)
and a maximum diameter of 50.8 mm (2 in). This adaptable and sturdy device allows seamless installation onto a variety
of pole sizes, offering flexibility and ease in positioning your Starlink for optimal performance.

Crafted from durable, weather-resistant materials, the mount can ensure a sturdy and enduring foundation for your
Starlink, capable of withstanding various environmental conditions.

The Starlink Pipe Adapter is engineered for easy installation and is accompanied by all necessary hardware and
user-friendly instructions, ensuring a hassle-free setup process.

ONLY INTENDED TO BE USED WITH METAL PIPES, NOT PVC AND PLASTIC PIPES.

Compatibility: 558 mm
Starlink Standard (21.96 in)

Kit Contents:
Pipe Adapter Mount, Allen Key,
20x Cable Routing Clips 213 mm
(8.38 in)
Package Dimensions:
250 x 165 x 85 mm (9.8 x 6.5 x 3.3 in)

Package Weight:
0.50 kg (1.2 lbs) 31 mm - 51 mm
(1.25 in - 2 in)
STANDARD RIDGELINE MOUNT

The Ridgeline Mount requires no drilling and is designed to sit on the top ridge of a gable roof. Held in place by included
ballast weights, the mount is ideal when you are unable or unwilling to drill holes in a roof. The mount works great with
metal and shingled roofs with slopes less than 45 degrees, but is not recommended for clay tile roofs.

With a wind rating of up to 80 kph (50 mph), this mount supports most installation needs.

Compatibility:
Starlink Standard 0 - 180°

Kit Contents:
Ridgeline Mount, 4x Ballast Weights,
20x Cable Routing Clips

Package Dimensions:
Mount: 756 x 656 x 101.4 mm (29.8 x 25.8 x 4.0 in)
Ballast: 424 x 124 x 189 mm (16.7 x 4.9 x 7.4 in)
612 mm
(24.1 in)
Package Weight:
Mount: 5.8 kg (12.8 lbs)
Ballast: 25.3 kg (55.8 lbs)

676 mm
(26.6in)
GEN 3 ROUTER MOUNT

The Router Mount is designed to mount the Gen 3 Router directly to a wall or other surface.

It is ideal for home or office use when no desk space is available, or for mobility applications
where space efficiency is paramount.

Once the Router Mount is installed, the Gen 3 Router is easily snapped into place and cable
retention ensures the cables are not accidentally pulled out.

Compatibility:
Gen 3 Router

Kit Contents:
Router Mount, 2x Screws,
2x Drywall Anchors
132.5 mm
Recommended Tools: (5.2 in)
Drill, Marker, #2 Phillips Screwdriver, 4 mm
(5/32 in) Drill bit (no anchors) or 7 mm
(9/32 in) Drill bit (wall anchors)

Package Dimensions:
250 x 165 x 85 mm (9.8 x 6.5 x 3.3 in)
298.6 mm 66 mm
(11.76 in) (2.60 in)
Package Weight:
0.34 kg (0.75 lbs)
STANDARD POWER SUPPLY MOUNT

The Power Supply Mount is designed to mount the power supply directly to a wall or other surface.

It is ideal for your home or office use when no desk space is available, or for mobility applications
where space efficiency is paramount.

Once the Power Supply Mount is installed, the power supply is easily snapped into place and cable
retention ensures the input power cable is not accidentally pulled out.

Compatibility:
Starlink Standard Power Supply

Kit Contents:
Power Supply Mount, 2x Screws,
2x Drywall Anchors
102.4 mm
(4 in)
Recommended Tools:
Drill, Marker, #2 Phillips Screwdriver, 4 mm
(5/32 in) Drill bit (no anchors) or 7 mm
(9/32 in) Drill bit (wall anchors)

Package Dimensions:
250 x 165 x 85 mm (9.8 x 6.5 x 3.3 in) 181 mm 48.75 mm
(7.13 in) (1.92 in)
Package Weight:
0.34 kg (0.75 lbs)
STANDARD CABLES

STANDARD CABLE | 15 m (49.2 ft)

The 15m cable is designed to replace the Standard 15m Cable

from the Starlink Kit in case of damage or if you need an
extra cable outside of your permanent installation.

Compatibility:
Starlink Standard

Cable Length:
15 m (49.2 ft)

Package Dimensions:
135 x 50 x 360 mm (5.3 x 2 x 14.2 in)

Package Weight:
1 kg (2.2 lbs)

STANDARD CABLE | 45 m (147.6 ft)

The 45m cable is designed to replace the Standard 15m Cable

from the Starlink Kit when additional length is needed
between your install location and the router.

Compatibility:
Starlink Standard

Cable Length:
45 m (147.6 ft)

Package Dimensions:
89 x 311 x 324 mm (3.5 x 12.3 x 12.76 in)

Package Weight:
2.9 kg (6.4 lbs)