Scribd Logo
Upload

Welcome to Scribd!

  • 9 views

    0124 Data

    Uploaded by

    isaacsaddek17
    The DFC-0124 is an advanced power factor controller that offers precise compensation of reactive loads through 24 step outputs. It has extensive monitoring capabilities through Ethernet, GPRS, and USB ports. Key features include automatic setup, precision measurement and correction, remote monitoring and control, data recording, and communication via Modbus, SNMP, and embedded web interface. It provides static and SVC var compensation in a compact 144x144mm enclosure.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    0124 Data

    Uploaded by

    isaacsaddek17
    9 views4 pages
    The DFC-0124 is an advanced power factor controller that offers precise compensation of reactive loads through 24 step outputs. It has extensive monitoring capabilities through Ethernet, GPRS, and USB ports. Key features include automatic setup, precision measurement and correction, remote monitoring and control, data recording, and communication via Modbus, SNMP, and embedded web interface. It provides static and SVC var compensation in a compact 144x144mm enclosure.

    Original Title

    0124_DATA (2)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The DFC-0124 is an advanced power factor controller that offers precise compensation of reactive loads through 24 step outputs. It has extensive monitoring capabilities through Ethernet, GPRS, and USB ports. Key features include automatic setup, precision measurement and correction, remote monitoring and control, data recording, and communication via Modbus, SNMP, and embedded web interface. It provides static and SVC var compensation in a compact 144x144mm enclosure.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    9 views4 pages

    0124 Data

    Uploaded by

    isaacsaddek17
    The DFC-0124 is an advanced power factor controller that offers precise compensation of reactive loads through 24 step outputs. It has extensive monitoring capabilities through Ethernet, GPRS, and USB ports. Key features include automatic setup, precision measurement and correction, remote monitoring and control, data recording, and communication via Modbus, SNMP, and embedded web interface. It provides static and SVC var compensation in a compact 144x144mm enclosure.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    DFC-0124

    REACTIVE POWER
    CONTROLLER
    The DFC-0124 is an advanced, precision 24 step power
    factor control and metering device offering unrivalled
    internet monitoring capabilities in a standard 144x144mm
    panel mount enclosure.
    The unit can drive thyristor based solid state contactors for
    the precise compensation of fast changing reactive loads.

    FEATURES
    • User friendly menu system, ease of use
    • Easy and fast setup
    • Automatically corrects faulty voltage/current connections
    • Automatic setup under load
    COMMUNICATION PORTS
    • MV current measuring version available • Internal GPRS modem
    • Adjustable measurement period: 10-100ms
    • Internal Ethernet 10/100Mb
    • Power factor correction delay as low as 20ms
    • RS-485 isolated (Modbus RTU)
    • 100 MIPS, 32 bit ARM core microprocessor
    • 24-18-12 step output options • RS-232 for external GPRS modem
    • All outputs can drive static contactors • USB Host for data recording on flash memory
    • All outputs can drive 1-2-3 phase capacitors or reactors • USB Device for PC connection
    • Always exact correction with SVC outputs
    • 0.5% measurement accuracy, true RMS measurements
    • 32 bit power measurements
    COMMUNICATIONS
    • Operation in low currents (3mA) • Modbus RTU RS-485, 2400-115200 baud
    • Ready for remote monitoring through Ethernet and GPRS • Modbus TCP/IP
    • Remote control of steps • SNMP
    • Remote parameter editing • TCP/IP server
    • Automatic geo-positioning through GPRS • TCP/IP client
    • Embedded website • UDP
    • Long term data recording on USB flash memory • SMTP
    • 250 event records with date-time and measurements • SNTP
    • Dynamic DNS support
    • Independent target COS for the generator
    • Embedded website, HTML
    • Display of 1-2-3 phased steps on screen
    • GSM-SMS sending
    • Harmonic distortion display (31 harmonics) • E-mail sending
    • Oscilloscope, waveform display • Central Monitoring through IP
    • Battery backed-up real time clock
    • User configurable display screens
    • User configurable relay outputs MEASUREMENTS
    • Voltage transformer ratio for MV applications
    • Password protected front panel programming • Phase to phase voltages: U12-U23-U31-Uavg
    • Reduced panel depth: 69mm • Phase to neutral voltages: V1-V2-V3-Vavg
    • Sealed front panel (IP65 with gasket) • Phase currents: I1-I2-I3-In-Iavg-Itot
    • Active power: P1-P2-P3-∑P
    SVC OUTPUTS • Reactive power: Q1-Q2-Q3-∑Q
    • Apparent power: S1-S2-S3-∑S
    SVC stands for “Static Var Compensation”.
    • Power factor: cos1-cos2-cos3-∑cos
    The unit has 3 SVC outputs which are duty cycle
    controlled PWMs that control 3 reactors with a • 1...31 Harmonics of any voltage or current
    precision of 1000 steps.
    Thus the controller is able to supply almost any
    required reactive power, enabling matching the exact
    required PF, independently from capacitor bank
    selection.
    o
    COMMUNICATION DIAGRAM

    INTERNAL GSM MODEM SNMP COMMUNICATION


    SMS, e-mail, geo-positioning, central monitoring and The device allows SNMP communication through its
    remote parameter edit features are provided through the ethernet port. The MIB file is available at Datakom
    internal GSM modem of the controller. Technical Support.

    EXTERNAL GSM MODEM DETAILED DATA RECORDING


    The external Datakom DKG-090 modem provides SMS, e- The unit records all measured values with the required
    mail, geo-positioning, central monitoring and remote period to the USB flash memory placed in the USB Host
    parameter edit features. port. The memory capacity is unlimited and detailed data
    recording may continue during years.
    INTERNAL ETHERNET PORT
    RAINBOW PLUS SOFTWARE
    The internal 10/100Mbits ethernet port of the controller
    provides e-mail, central monitoring, embedded website, The free Rainbow Plus software allows monitoring, control
    Modbus TCP/IP, SNMP communication and remote and parameter edit of the device. It works both through
    parameter edit features. USB, RS-485 and internet. In case of inaccessible devices
    behind firewall, an access path through the central
    E-MAIL SENDING monitoring program is also provided.

    In case of fault or preprogrammed conditions, the device is


    able to send e-mail messages to 3 addresses through both
    ethernet and internal / external GSM-modems.

    SMS SENDING
    In case of fault or in preprogrammed conditions, the device
    is able to send SMS messages to a maximum of 4
    addresses through internal / external GSM-modems.

    MODBUS RTU – MODBUS TCP/IP


    The device allows MODBUS RTU communication through
    its isolated RS-485 port. The MODBUS TCP/IP
    communication is performed through the ethernet port.
    EMBEDDED WEBSITE CENTRAL MONITORING
    All important information of the device may be monitored An unlimited number of units are monitored though internet
    through internet with any web browser. The embedded with the free central monitoring software. The software
    website is available through the ethernet port. Thanks to the supports devices with local IP or dynamic IP. This feature is
    dynamic DNS support, no static IP is required. provided through both ethernet and GSM modem.
    The central monitoring program allows remote control of the
    operating mode and the manual control of step outputs for
    remote testing purposes.

    Central Monitoring on Map


    Daily & Monthly Performance

    Performance Statistics

    Real-time Measurements

    Step Monitoring & Remote Control

    Smartphone support
    Steps
    o
    INSTALLATION DIAGRAM

    o
    TECHNICAL SPECIFICATIONS

    Power Supply Input: Voltage burden: < 0.1VA per phase


    85 to 270V AC Current burden: < 0.5VA per phase
    50 - 60Hz nominal (± 10%) Number of step outputs: 24
    Power Consumption: < 15 VA Relay Outputs: 5A @ 250V AC
    Measurement Input Range: Static Contactor Outputs: 50mA @ 12V DC
    Voltage: 5 - 300 V AC (L-N) SVC Outputs: 50mA @ 12V DC
    10 - 520 V AC (L-L) Temperature Input: PT100 sensor or switch (optional)
    Current: 0.005 - 5.5 A AC Operating Temperature:
    Frequency: 30 - 100 Hz -20°C to +70°C (-4 to +176 °F).
    Accuracy: Maximum humidity: 95% non-condensing.
    Voltage: 0.5%+1digit Degree of Protection: IP 65 (Front with gasket)
    Current: 0.5%+1 digit IP 30 (Back)
    Frequency: 0.2%+1 digit Enclosure: Non-flammable, ROHS compliant
    Power(kW,kVAr): 1.0%+2digit Installation: Flush mounting with rear brackets
    Power factor: 0.5%+1digit Dimensions: 164x164x69mm (WxHxD)
    Measurement Range: Panel Cutout: 140x140mm
    CT range: 5/5A to 10’000/5A Weight: 700 gr
    VT range: 0.1/1 to 5000.0/1 EU Directives: Norms of reference:
    kW range: 0.1 kW to 6.5MW 2006/95/EC (LVD) EN 61010 (safety)
    2004/108/EC (EMC) EN 61326 (EMC)

    REV-2

    You might also like