PPIHiper
PPIHiper
PPIHiper
Complete, Cutting-Edge
Performance
Power
Button
Status Battery
Recording RxTx
®
Bluetooth Cellular
HIPER VR
Signal
GPS Signals L1 C/A, L1C* L2C, L2P(Y), L5 • 4G LTE cellular module for high speed
network corrections worldwide (optional)
2
*L1C when signal available.
GLONASS L1 C/A, L1P, L2C/A, L2P, L3C*
*L3C when signal available.
Galileo E1/E5a/E5b/Alt-BOC
BeiDou/BDS B1, B2
IRNSS L5
SBAS WAAS, EGNOS, MSAS,
GAGAN (L1/L5*)
*L5 when signal available. L Band Ready with SkyBridge®
L-band TopNET Global D & C
Corrections services Technology
QZSS L1 C/A, L1C, L1-SAIF, L2C, L5
• L Band ready to receive advanced GNSS
Positioning Performance corrections data set globally
Static/ H: 3 mm + 0.4 ppm
• SkyBridge Technology to provide
®
Fast Static V: 5 mm + 0.5 ppm
uninterrupted RTK positioning
3
RTK H: 5 mm + 0.5 ppm
RTK, TILT H: 1.3 mm/°Tilt; Tilt ≤ 10°
Compensated H: 1.8 mm/°Tilt; Tilt > 10°
Maximum recommended
angle for tilt compensation
is 15° Subject to successful
TILT calibration & operating
environment free of
magnetic disturbances Highly configurable
DGPS 0.25 m HRMS
Designed to grow with you, unique electronic
L-Band, D H: < 0.1 m (95%)
Corrections V: < 0.2 m (95%) option files empower you to activate available
Service
RTK with H: RTK + 10 mm/min RMS features instantly.
SkyBridge V: RTK + 15 mm/min RMS
RTK is the precision known
before RTK correction source
was lost.
Operational RX mode - 10hr
Time TX mode 1W - 6hr
Use of external 12V battery is
recommended when using HiPer VR
with internal radio in transmit mode.
Cellular Global 12 band 4G/LTE with
Technology
Internal Radios
2G/3G fallback
425-470 MHz UHF radio
Future proof
Max Transmit Power: 1W Topcon’s full-wave Antenna tracks all
Range: 5-7 km typical; 15 km
in optimal conditions GNSS signals currently available and is
Memory Internal Non-removable 8 GB
SDHC designed to track the constellations and
Environmental Ingress Rating – IP67 signals of tomorrow.
Operating Temp –
-40ºC to 70ºC
Humidity – 100%, condensing
Drop and Topple –
1.0 m drop to concrete.
2.0 m pole drop to concrete.
Dimensions 150 x 100 x 150 mm
(w x h x d)
Weight <1.15 kg * Under nominal observing conditions and strict processing methods, including use of dual frequency GPS, precise
ephemerides, calm ionospheric conditions, approved antenna calibration, unobstructed visibility above 10 degrees
and an observation duration of at least 3 hours (dependent on baseline length). 1* Check with the regulatory body in
your region regarding license free frequency requirements. 2* Contact your Topcon representative regarding availability.
3* Contact your Topcon representative regarding availability and pricing.
** Subject to successful TILT calibration and operating environment free of magnetic disturbances.