Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    MOLYKOTE Multilub Synthetic High Performance Grease 01-1050A-01

    Uploaded by

    pmf engineering limited
    This document summarizes the features and typical properties of MOLYKOTE Multilub Synthetic High Performance Grease. It is a multipurpose grease with enhanced low-temperature performance down to -58°F. It has a bright yellow color, wide service temperature range, high load capacity, and compatibility with plastics. It can be used for bearings, gears, and other applications from -58°F to 302°F. When stored properly, it has a usable life of 36 months.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    MOLYKOTE Multilub Synthetic High Performance Grease 01-1050A-01

    Uploaded by

    pmf engineering limited
    30 views2 pages
    This document summarizes the features and typical properties of MOLYKOTE Multilub Synthetic High Performance Grease. It is a multipurpose grease with enhanced low-temperature performance down to -58°F. It has a bright yellow color, wide service temperature range, high load capacity, and compatibility with plastics. It can be used for bearings, gears, and other applications from -58°F to 302°F. When stored properly, it has a usable life of 36 months.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the features and typical properties of MOLYKOTE Multilub Synthetic High Performance Grease. It is a multipurpose grease with enhanced low-temperature performance down to -58°F. It has a bright yellow color, wide service temperature range, high load capacity, and compatibility with plastics. It can be used for bearings, gears, and other applications from -58°F to 302°F. When stored properly, it has a usable life of 36 months.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    30 views2 pages

    MOLYKOTE Multilub Synthetic High Performance Grease 01-1050A-01

    Uploaded by

    pmf engineering limited
    This document summarizes the features and typical properties of MOLYKOTE Multilub Synthetic High Performance Grease. It is a multipurpose grease with enhanced low-temperature performance down to -58°F. It has a bright yellow color, wide service temperature range, high load capacity, and compatibility with plastics. It can be used for bearings, gears, and other applications from -58°F to 302°F. When stored properly, it has a usable life of 36 months.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    MOLYKOTE® Multilub Synthetic

    High Performance Grease


    Multipurpose grease with enhanced low-temperature performance (NLGI HPM + LT)

    Features
    • Easily distinguishable bright yellow color
    • Wide service-temperature range
    • High load-carrying capacity
    • Low coefficient of friction
    • Compatible with many plastics and elastomers
    • No intentional polytetrafluoroethylene (PTFE) or per- and
    polyfluoroalkyl substances (PFAS)

    Typical properties
    Composition
    Specification writers: These values are not intended for use in
    • Synthetic hydrocarbon oil
    preparing specifications. Please contact your local MOLYKOTE®
    • Lithium soap
    sales representative prior to writing specifications on this product.
    • Specially formulated additives
    Standard(1) Test Unit Result
    Appearance Yellow
    Applications
    ASTM D217 Penetration (w/60) mm/10 ~300
    Multiuse grease with broad applicability for moderate (NLGI #1-2)
    environments and speeds. Product can be used for many (w/100) +4%
    applications, including bearings, gears and slides in such ASTM D2265 Dropping point °F (°C) 383 (195)
    equipment as centrifuge pumps, blend tanks agitators, spindles,
    gearboxes, bushings, actuators and springs. MOLYKOTE® CTM 0033A Bleed % 3.5

    Multilub Synthetic High Performance Grease also can be used at CTM 0033A Evaporation % 0.2
    temperatures as low as -58°F (-50°C). Service temperature range °F (°C) -58 to 302
    (-50 to 150)
    ASTM D942 Oxidation stability psi 0.3
    How to use (100 hr @ 100°C) (kPa) (2.07)
    Clean point of lubrication. As is usual with lubricating grease, ASTM D6184 Oil separation (conical wt% 0.87
    apply or fill by means of brush, spatula or automatic dispensing sieve, 30 hr @ 100°C)
    equipment. ASTM D2266 Four-ball wear test mm 0.49
    (1,200 rpm, 1 hr @ 75°C)
    ASTM D2596 Four-ball weld point Kg 400
    Handling precautions (1,770 rpm @ 52°C)
    PRODUCT SAFETY INFORMATION REQUIRED FOR SAFE ASTM D1478 Low-temperature torque
    USE IS NOT INCLUDED IN THIS DOCUMENT. BEFORE test (-40°C)
    Starting torque mN*m 174
    HANDLING, READ SAFETY DATA SHEETS AND CONTAINER
    Running torque mN*m 21
    LABELS FOR SAFE USE, PHYSICAL AND HEALTH HAZARD
    INFORMATION. DIN 51805 Flow pressure mbar 296
    ASTM D4048 Copper corrosion Rating 1B
    (24 hr @ 100°C)
    Usable life and storage (1)
    ASTM: American Society for Testing and Materials. CTM: Corporate Testing
    When stored in the original unopened containers, MOLYKOTE® Method. DIN: Deutsches Institut für Normung (German Institute for Standardization).

    Multilub Synthetic High Performance Grease has a usable life of


    36 months from the date of production.
    Packaging
    This product is available in different standard container sizes as
    shown on molykote.com. Detailed container size information
    should be obtained from your nearest MOLYKOTE® sales office
    or MOLYKOTE® distributor.

    DuPont™, the DuPont Oval Logo, and all trademarks and service marks denoted with ™, ℠ or ® are owned by affiliates of DuPont de Nemours, Inc.
    unless otherwise noted.
    © 2022-2024 DuPont.
    The information set forth herein is furnished free of charge and is based on technical data that DuPont believes to be reliable and falls within the normal
    range of properties. It is intended for use by persons having technical skill, at their own discretion and risk. This data should not be used to establish
    specification limits nor used alone as the basis of design. Handling precaution information is given with the understanding that those using it will satisfy
    themselves that their particular conditions of use present no health or safety hazards. Since conditions of product use and disposal are outside our
    control, we make no warranties, express or implied, and assume no liability in connection with any use of this information. As with any product,
    evaluation under end use conditions prior to specification is essential. Nothing herein is to be taken as a license to operate or a recommendation to
    infringe on patents.
    Form No. 01-1050A-01 (01/24) AGP17374

    You might also like