0

Log In Cart

HVAC Controls Sensors Thermostats Plumbing Electrical Line Card About Us Support Ge

SINGLE AND 3-PHASE POWER CALCULATOR

Measurements must be precise when choosing electrical equipment or when working with single or three-phase circuits. If you don't
like to count kW and Amps manually — we have a solution! Our online AC power calculator can help you convert electrical
power into current and vice-versa for single-phase and three-phase electric power.

Active and apparent electrical power

Type of circuit, wiring
* Single-phase

Voltage (U), V *

AC Current (I), A *

Quantity, appliance *

Power factor (PF) *

Apparent power, VA:

Active POWER (P),

W:

Ca lcula t e

Energy calculation
Optional. If you want to calculate the energy and electricity bill associated with this active power, fill the time value and energy cost below.

Hours a day, h

Number of days

Cost of energy, $/kWh

 AC Energy, kWh:
0
Log In Cart
Total amount of electricity bill, $:

Ca lcula t e

nclosure r relays
s

Looking For Electrical Supplies?

From wiring to enclosures, we got it all!
Shop now at Blackhawk Supply store!

ELECT RICAL SUPPLIES FOR ENCLOSUR M ET RELAYS

SALE ESmetering
ERING

How to Use a Power Calculator?

Do you want to convert Amps to kW (or the other way around) without doing mathematical calculations? No problem!

Our single-phase and 3-phase power calculator is elementary to use. Just fill the fields with the necessary data,
including the current type, voltage, and power factor. The calculator will do everything automatically.

AC Apparent Power Calculator — kW to Amps

Current type

AC - Single-Phase power calculation

AC - Three-Phase power calculation

DC

Current in Amps

Voltage type

Line-to-line

Line-to-neutral

Voltage (in volts)

Enter power factor

Calculate; Reset; Swap;

Power results (milliwatts)

Power results (watts)

Power results (kilowatts)

Ampere (A or Amp) and kilowatts (kW) are two different parameters of electricity. Let's break down what they are.

An ampere indicates the number of currents drawn by the load. Kilowatts is the amount of consumed power by the load at
any instant. In short, amperes measure current, while kilowatts measure power.
 How can you convert amps to kilowatts for 3-phase, 1-phase alternating current irect current (DC) electric power?

(AC), or d Kilowatts can't be converted to amps directly. The amount of current

0 or n the power factor, type of current, and
Log In Cart
power depends o
However, you can get precise measurements by converting these metrics with formulas. Alternatively, you can use our
kilowatts to
amps three-phase converter, as well as a single-phase and DC power calculator.

What Is Single-Phase Electric Power?

Phase means the electric load distribution by either a single-phase or a three-power supply.

Single-phase electric power is typically used in domestic supplies, residential homes, and small offices. In other words, it
works for appliances that need a small amount of power (refrigerators, lights, heaters, TVs, and similar tech).

The standard for single-phase power distribution in the US stands at 120 volt AC power at 60 hertz (frequency). Each hertz
stands for the number of electricity changes happening within a wire each second. We should note that AC power can switch
polarity, unlike DC voltage power.

How to Calculate Single-Phase Power?

Here are the formulas you can use for single-phase power calculation.

Kilowatts from Amps

kW = PF X A X V / 1000

In this formula, the amount of power (in kW) is equal to the power factor of the load (PF) multiplied by the phase current
measured
in Amps (A), times the RMS voltage (V), and divided by 1000.

Amps from Kilowatts

A = 1000 X kW / (PF X V)
 The A stands for phase current, which equals kW (power) multiplied by 1000, then
divided the RMS voltage (V).by the power factor (PF) multiplied by
0
Log In Cart
What Is Three-Phase AC Power?

Three-phase electric power is the common type of AC power generation and distribution, widely used for loads larger than
1000 watts. Unlike single-phase power supply, 3-phase power needs less aluminum or copper, has a greater conductor
efficiency, and sustains large power loads. It also provides an overall greater density, thus optimizing energy consumption.

For more accurate power calculation, a formula for 3-phase applications must account the type of power configuration.
The two most common configurations are delta (used only three wires) and wey (has a fourth neutral wire).

A three-phase electric power supply is typically found in commercial and industrial facilities with large motors,
manufacturing equipment, capacity air conditioners, and other heavy-load applications.

Now, for the main topic. How do you transfer amps to kilowatts in a three-phase circuit (and vice-
versa)?
 0
Log In Cart

Three-Phase Power Calculation Formula

Here are the equations you can use for three-phase power calculation. Keep in mind that the 3-phase power formula
will be different for line-to-line and neutral voltages.

Kilowatts from Amps (line-to-line voltage)

kW = √3 X PF X A X V / 1000

The power (kW) equals the square root of three (√3) multiplied by the power factor (PF) times the current (Amps or A),
times the line-to-line RMS voltage (V) divided by 1000.

Kilowatts from Amps (line-to-neutral voltage)

kW = 3 X PF X A X V / 1000

You can calculate 3-phase power from amps to kW with line-to-neutral voltage just as you would with line-to-line voltage.
The only difference is that the square root of three (√3) is replaced by a number three (3), and line-to-line RMS is
replaced by line-to- neutral RMS voltage in the equation.

Amps from Kilowatts (line-to-line voltage)

A = 1000 X kW / (√3 X PF X V)

The phase current (A) equals 1000 times the kilowatts (kW), divided by the square root of three multiplied by the power
factor (PF), multiplied by the line-to-line RMS voltage (V).

Amps from Kilowatts (line-to-neutral voltage)

A = 1000 X kW / (3 X PF X V)

For a 3-phase power supply calculation, you need to multiply 1000 by the power (kW), divided by three times the power
factor times line-to-neutral RMS voltage (V).
 What Is the Power Factor?
0
Log In Cart

We've mentioned the power factor (PF) several times in the formulas. It refers to the ratio between the real and apparent
power dissipated by an AC circuit to the electrically powered product.

Real power means electrical power used by the devices, while apparent power (reactive power) means electricity supplied
to the AC circuit.

The power factor value ranges from zero to one, depending on the resistive and real load.

The power factor stands at zero (0) when all power is reactive power.

The power factor stands at one (1) when all power is real (without reactive power).

How to Calculate Power Factor?

There are many PF equations based on the type of power and current. Let's go through every power factor formula.

The power factor for sinusoidal current is equal to the absolute cosine value of the apparent power phase. The apparent
power phase angle will be marked as φ in the formulas below.

To calculate real power in watts:

W = |VA| X PF = |VA| X |cos φ|

The real power equals apparent power in volt-ampere (VA) multiplied by the PF factor.

Resistive impedance load

PF(resistive load) = P / |S| = 1

The real power in resistive impedance loads equals apparent power (S), with the power factor (PF) standing at 1 (one).

Volt-amps reactive POWER

Q = |VA| X |sin φ|

The reactive power (Q) in volt-amperage reactive equals the apparent power in volt-ampere (VA) multiplied by the sine of the
phase angle.

Single-phase power FORMULA

PF = |cos φ| = 1000 X kW / (V X A)

To calculate the power factor from a single-phase circuit, you need to multiply 1000 by the power in kilowatts (kW),
divided by RMS voltage (V) times phase current in amperes (A).

3-phase power FORMULA (line-to-line)

PF = |cos φ| = 1000 X kW / (√3 X V X A)
 Line-to-line 3-phase power calculation for power factor is 1000 multiplied by power atts (kW), then divided by the square
in kilow root of three multiplied by the line-to-line RMS voltage (V) times phase .
current in amps (A) 0
Log In Cart
PF = |cos φ| = 1000 X kW / (3 X V X
A)

To measure the PF for line-to-neutral 3-phase power, multiply 1000 by kilowatts (kW), then divide by three times line-to-
neutral
RMS voltage (V) times amps (A).

Converting kW to Amps
Do you want to convert kilowatts to amps? It's possible to calculate this data using a simple formula (provide you know the
power factor). The formula is:

I = P / (√3 X PF X V)

In this equation, I stands for the current (amps), P stands for the related power (measured in watts), PF is the power factor,
and V is the voltage.

If your power measures in thousands of watts, it'll be easier to convert data to watts by multiplying it by 1000. You also
need to make sure your voltage measures in kilovolts (kV).

Let's give you an example using the formula above. If your power factor is 0.8, and you have 1.5 kW (1500 W) power and a
steady 220 voltage (V), the calculation will be:

I = 1,500 / (√3 X 0.8 X 220) = 4.92 A

Just like that, you can convert watts and kilowatts to amperes.

Converting Amps to kW
Now, let's do the reverse. For amps to kilowatt conversion, use the following formula:

P = √3 X PF X I X V

The markings are the same here. P is power, the power factor is PF, I is the current (amps),
and V stands for voltage.

For our next example, we will use the same voltage (220 V) and power factor (0.8) and
have a 4.92 A current.

Now, let's convert amps to kilowatts:

P = √3 X 0.8 X 4.92 X 220 = 1500 W = 1.5 kW

Conclusion
As you can see, calculating and converting amps to kilowatts and vice-versa is pretty easy. However, it can be a little
time- consuming to use formulas for 3-phase apparent power calculation.

If you want to get precise measurements without any hassle — use our online AC power calculator, as it will help you
find the best electrical supplies for your single and three-phase systems.

Blackhawk Supply has a wide assortment of HVAC, plumbing, and electrical

equipment. Choose relays, enclosures, transformers, power supplies, and other
devices!
 0
Log C

Image for Power Supplies

P OWER S UP P LIES

Image for Wires

WIR ES

Image for Transformers

T R ANS FOR MER S

Image for Enclosures

ENCLOS UR ES
 0
Log C

Featured Products

AH04 | Fuse Pack | Triple | 1/2A | 600VAC | Slow-Blow | Veris

Brand:
Veris SKU:
AH04

$110.55 each

AD D TO CAR T
− 1 +

RWC-P182CS/M1-WH | Control Cable 18G 2C 1000ft EasyPull Box Shielded Plenum Rated White | Reliable
Wire

Brand: Reliable Wire

SKU: RWC-P182CS/M1-
WH

View Det a ils

 0
Log C

PX3ULX05 | Pressure | Dry | Univ | LCD | Veris

Brand: Veris
SKU:PX3ULX05

$151.55 each

AD D TO CAR T
− 1 +

PSH100AB10 | Enclosed Single 100VA 120 to 24Vac UL Class 2 power supply 10A main breaker | Functional Devices

Brand: Functional Devices

SKU: PSH100AB10

$107.29 each

AD D TO CAR T
− 1 +

Free Shipping On Excellent Customer Secure Online 5-Star Quantity

Orders Over Satisfaction Payment Customer Discounts
$999* Service

Interested In
 Learn More →

0
Log C

FOLLOW
Home US
Shippi Blog

Line Ca ngSea P r i va c y P o l i c y

rd rch
Ab o u t Us Te r m s o f S e r vi Returns

Contact ceSitemap OrderStat

Us us

© 2024 Blackhawk Supply.

All Rights Reserved

*Exclusions Apply

Made by Comrade - Comrade Digital Marketing

Agency