Scribd
Upload
92 views1 page

Fit Up ADI

A daily report summarizes piping fit up work done for a tank lorry project. It lists 5 pipe lines welded with butt welds and single bevel preprations. Thickness of pipes was 6mm. Fit up gaps were 3mm for all lines. No issues were noted. Abbreviations at bottom define terms like butt weld, bevel type, and whether beveling was done in field or mill. Report was signed off by quality control and inspection with no issues.

Uploaded by

muhdfaris4059
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
92 views1 page

Fit Up ADI

A daily report summarizes piping fit up work done for a tank lorry project. It lists 5 pipe lines welded with butt welds and single bevel preprations. Thickness of pipes was 6mm. Fit up gaps were 3mm for all lines. No issues were noted. Abbreviations at bottom define terms like butt weld, bevel type, and whether beveling was done in field or mill. Report was signed off by quality control and inspection with no issues.

Uploaded by

muhdfaris4059
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Project: TANK LORRY

Client: KAMARUL BIN AZMAN Report No.:3345243


FIT UP DAILY REPORT Contractor:AMIR BIN SAIFUL
Ref. Standard:
Date:20/2/2024
Page 1 of 1
(PIPING) Doc. No.:

Area/ Location:NEGERI SEMBILAN Ref. Drawing:4Z6DWT010 Rev.A4

Spool Joint Joint Type of Bevel Bevel High-Low Fit up


Line No. Thk. Remarks
No. No. Type Material Type Preparation (mm) Result
1 5 SW/BW - B 6mm / - F 3mm /
2 3 SW/BW - B 6mm / - F 3mm /
3 3 10
SW/BW - B 6mm / - M 3mm /
4 2 11
SW/BW - B 6mm / - M 3mm /
5 2 08
SW/BW - B 6mm / - M 3mm /
03 / -
/ -
/ -
/ -
/ -

Abbreviation:
B: Butt Weld, S: Socket Weld, T: Seal Weld (for Threaded Joints), M: Miter
P: Pipe, FL: Flange, FT: Fitting, V: Valve, O: Other - (Example: P/FL: Pipe to Flange)
S: Single Bevel, D: Double Bevel (For Thickness>0.750” [19.05 mm]) - V: V-Groove, X: X-Groove, U: U-Groove, P: Plain. - (Example: S-V)
F: Field Beveling (Manual) , M: Mill Beveling
Quality Control TPI Inspection Client
Name Name Name
: : :
Sign: Sign: Sign:

You might also like