Scribd
Upload
486 views2 pages

Ipc Cert

Donovan Tilly has received certification as an IPC Specialist after successfully completing the Application Specialist course of study for IPC J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. He is certified through September 2022 and successfully completed modules on wire and terminal assembly/soldering, through-hole components, surface mounting, and inspection criteria on September 25th, 2020.

Uploaded by

api-728571121
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
486 views2 pages

Ipc Cert

Donovan Tilly has received certification as an IPC Specialist after successfully completing the Application Specialist course of study for IPC J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies. He is certified through September 2022 and successfully completed modules on wire and terminal assembly/soldering, through-hole components, surface mounting, and inspection criteria on September 25th, 2020.

Uploaded by

api-728571121
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Donovan Tilly

having successfully completed the Application Specialist course of study on

IPC J-STD-001
Requirements for Soldered Electrical and Electronic Assemblies

is hereby designated

Certified IPC Specialist


Serial No. J001S-20093054184
This certificate is your official notification of meeting all the necessary requirements in the
mandatory module and designation of Certified IPC Specialist (CIS) in the industry developed
and approved IPC J-STD-001 Training and Certification Program. You may now use the CIS
designation on letterhead, business cards, and all forms of address.

September 25th, 2020


__________________________________________ Callie Olague
_______________________________________
Date of Completion of Mandatory Module IPC J-STD-001 Certified IPC Trainer

September 2022
__________________________________________ Northrop Grumman Systems Corporation
_______________________________________
Certification Expiration Month/Year of All Modules CIT’s Company/Employer
Regardless of Training Completion Date

Knowledge and Workmanship Modules


Certification dates below indicate successful completion of the required general knowledge
module(s) and successful completion of each applicable workmanship skills/inspection module(s).
Certification has not been accomplished in any module content that indicates not completed.

MODULES DATE OF COMPLETION


2. Wire & Terminal Assembly & Soldering 25 September 2020
3. Through-Hole components 25 September 2020
4. Surface Mounting of Components 25 September 2020
5. Inspection Criteria 25 September 2020
Donovan Tilly
having successfully completed the Application Specialist course of study on

IPC J-STD-001
Requirements for Soldered Electrical and Electronic Assemblies

is hereby designated

Certified IPC Specialist


Serial No. J001S-20093054184
This certificate is your official notification of meeting all the necessary requirements in the
mandatory module and designation of Certified IPC Specialist (CIS) in the industry developed
and approved IPC J-STD-001 Training and Certification Program. You may now use the CIS
designation on letterhead, business cards, and all forms of address.

September 25th, 2020


__________________________________________ Callie Olague
_______________________________________
Date of Completion of Mandatory Module IPC J-STD-001 Certified IPC Trainer

September 2022
__________________________________________ Northrop Grumman Systems Corporation
_______________________________________
Certification Expiration Month/Year of All Modules CIT’s Company/Employer
Regardless of Training Completion Date

Knowledge and Workmanship Modules


Certification dates below indicate successful completion of the required general knowledge
module(s) and successful completion of each applicable workmanship skills/inspection module(s).
Certification has not been accomplished in any module content that indicates not completed.

MODULES DATE OF COMPLETION


2. Wire & Terminal Assembly & Soldering 25 September 2020
3. Through-Hole components 25 September 2020
4. Surface Mounting of Components 25 September 2020
5. Inspection Criteria 25 September 2020

Powered by TCPDF (www.tcpdf.org)

You might also like