Material Safety Data Sheet

PURITY TM FG COMPRESSOR FLUID 68

1. Product and company identification

Product name : PURITY TM FG COMPRESSOR FLUID 68
Code : PFCO68
Material uses : PURITY FG COMPRESSOR FLUID 68 is a new and improved food grade compressor
fluid. NSF H1 Registered. All components comply with FDA 21 CFR 178.3570 "Lubricants
with Incidental Food Contact". It is intended for application on industrial and food
equipment. It should not be added directly to the food product. This compressor oil
should NEVER be used in equipment compressing pure oxygen or other chemically
active gases such as chlorine or hydrogen chloride. DO NOT USE in breathing air
apparatus or medical equipment.
Manufacturer : Petro-Canada Lubricants Inc.
2310 Lakeshore Road West
Mississauga, Ontario
Canada L5J 1K2
In case of emergency : Suncor Energy: 403-296-3000
Canutec Transportation: 613-996-6666
Poison Control Centre: Consult local telephone directory for emergency number(s).

2. Hazards identification
Physical state : Viscous liquid.
Odor : Mild petroleum oil like.
WHMIS (Canada) : Not controlled under WHMIS (Canada).
OSHA/HCS status : While this material is not considered hazardous by the OSHA Hazard Communication
Standard (29 CFR 1910.1200), this MSDS contains valuable information critical to the
safe handling and proper use of the product. This MSDS should be retained and
available for employees and other users of this product.
Emergency overview : No specific hazard.
Routes of entry : Dermal contact. Eye contact. Inhalation. Ingestion.
Potential acute health effects
Inhalation : No known significant effects or critical hazards.
Ingestion : No known significant effects or critical hazards.
Skin : Slightly irritating to the skin.
Eyes : Slightly irritating to the eyes.
Potential chronic health effects
Chronic effects : No known significant effects or critical hazards.
Carcinogenicity : Not listed as carcinogenic by OSHA, NTP or IARC.
Mutagenicity : No known significant effects or critical hazards.
Teratogenicity : No known significant effects or critical hazards.
Developmental effects : No known significant effects or critical hazards.
Fertility effects : No known significant effects or critical hazards.
Medical conditions : Repeated skin exposure can produce local skin destruction or dermatitis. Repeated or
aggravated by over- prolonged contact with spray or mist may produce chronic eye irritation and severe skin
exposure irritation.
See toxicological information (Section 11)

Date of issue : 3/5/2014. Internet: lubricants.petro-canada.ca/msds Page: 1/7

TM
Petro-Canada is a Suncor Energy business Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG COMPRESSOR FLUID 68 Page Number: 2

3. Composition/information on ingredients
Name CAS number %
Mixture of severely hydrotreated and hydrocracked base oil (petroleum). Mixture -

There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in
this section.
The base oil may be a mixture of the following CAS#s: 8042-47-5, 64742-46-7, 64742-47-8, 64742-53-6, 64742-54-7,
64742-55-8, 72623-84-8, 72623-85-9, 72623-86-0, 72623-87-1, 178603-64-0, 178603-65-1, 178603-66-2, 445411-73-4

4. First aid measures

Eye contact : Check for and remove any contact lenses. Immediately flush eyes with plenty of water
for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical
attention immediately.
Skin contact : In case of contact, immediately flush skin with plenty of water for at least 15 minutes
while removing contaminated clothing and shoes. Wash skin thoroughly with soap and
water or use recognized skin cleanser. Wash clothing before reuse. Clean shoes
thoroughly before reuse. Get medical attention immediately.
Inhalation : Move exposed person to fresh air. If not breathing, if breathing is irregular or if
respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.
Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention
immediately.
Ingestion : Wash out mouth with water. Do not induce vomiting unless directed to do so by medical
personnel. Never give anything by mouth to an unconscious person. Get medical
attention immediately.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. It may
be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Notes to physician : No specific treatment. Treat symptomatically. Contact poison treatment specialist
immediately if large quantities have been ingested or inhaled.

5. Fire-fighting measures
Flammability of the product : May be combustible at high temperature.
Extinguishing media
Suitable : Use an extinguishing agent suitable for the surrounding fire.
Not suitable : None known.
Special exposure hazards : Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training.
Products of combustion : Carbon oxides (CO, CO2), nitrogen oxides (NOx), smoke and irritating vapours as
products of incomplete combustion.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained breathing
equipment for fire-fighters apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Special remarks on fire : Low fire hazard. This material must be heated before ignition will occur.
hazards
Special remarks on : Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat or
explosion hazards sources of ignition.

6. Accidental release measures

Personal precautions : No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Avoid breathing vapor or mist.
Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment (see Section 8).

Date of issue : 3/5/2014. Internet: lubricants.petro-canada.ca/msds Page: 2/7

TM
Petro-Canada is a Suncor Energy business Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG COMPRESSOR FLUID 68 Page Number: 3

6. Accidental release measures

Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).
Methods for cleaning up
Small spill : Stop leak if without risk. Move containers from spill area. Dilute with water and mop up
if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and
place in an appropriate waste disposal container. Dispose of via a licensed waste
disposal contractor.
Large spill : Stop leak if without risk. Move containers from spill area. Approach release from
upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash
spillages into an effluent treatment plant or proceed as follows. Contain and collect
spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or
diatomaceous earth and place in container for disposal according to local regulations
(see section 13). Dispose of via a licensed waste disposal contractor. Contaminated
absorbent material may pose the same hazard as the spilled product. Note: see section
1 for emergency contact information and section 13 for waste disposal.

7. Handling and storage

Handling : Put on appropriate personal protective equipment (see Section 8). Eating, drinking and
smoking should be prohibited in areas where this material is handled, stored and
processed. Workers should wash hands and face before eating, drinking and smoking.
Remove contaminated clothing and protective equipment before entering eating areas.
Do not ingest. Avoid contact with eyes, skin and clothing. Avoid breathing vapor or
mist. Keep in the original container or an approved alternative made from a compatible
material, kept tightly closed when not in use. Empty containers retain product residue
and can be hazardous. Do not reuse container.
Storage : Store in accordance with local regulations. Store in original container protected from
direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials
(see section 10) and food and drink. Keep container tightly closed and sealed until
ready for use. Containers that have been opened must be carefully resealed and kept
upright to prevent leakage. Do not store in unlabeled containers. Use appropriate
containment to avoid environmental contamination.

8. Exposure controls/personal protection

Ingredient Exposure limits
Mixture of severely hydrotreated and ACGIH TLV (United States). Notes: (Mineral oil)
hydrocracked base oil (petroleum). TWA: 5 mg/m³, (Inhalable fraction) 8 hour(s).

Consult local authorities for acceptable exposure limits.

Recommended monitoring : If this product contains ingredients with exposure limits, personal, workplace atmosphere
procedures or biological monitoring may be required to determine the effectiveness of the ventilation
or other control measures and/or the necessity to use respiratory protective equipment.
Engineering measures : No special ventilation requirements. Good general ventilation should be sufficient to
control worker exposure to airborne contaminants. If this product contains ingredients
with exposure limits, use process enclosures, local exhaust ventilation or other
engineering controls to keep worker exposure below any recommended or statutory
limits.
Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period. Appropriate
techniques should be used to remove potentially contaminated clothing. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety showers
are close to the workstation location.
Personal protection

Date of issue : 3/5/2014. Internet: lubricants.petro-canada.ca/msds Page: 3/7

TM
Petro-Canada is a Suncor Energy business Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG COMPRESSOR FLUID 68 Page Number: 4

8. Exposure controls/personal protection

Respiratory : Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator. Recommended: organic vapor filter
Hands : Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary.
Recommended: neoprene, nitrile, polyvinyl alcohol (PVA), Viton®.
Eyes : Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists or
dusts.
Skin : Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before handling
this product.
Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure they
controls comply with the requirements of environmental protection legislation. In some cases,
fume scrubbers, filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.

9. Physical and chemical properties

Physical state : Viscous liquid.
Flash point : Open cup: 257°C (494.6°F) [Cleveland.]
Auto-ignition temperature : Not available.
Flammable limits : Not available.
Color : Colorless.
Odor : Mild petroleum oil like.
Odor threshold : Not available.
pH : Not available.
Boiling/condensation point : Not available.
Melting/freezing point : Not available.
Relative density : 0.8705 kg/L @ 15°C (59°F)
Vapor pressure : Not available.
Vapor density : Not available.
Volatility : Not available.
Evaporation rate : Not available.
Viscosity : 67.2 cSt @ 40°C (104°F), 9.0 cSt @ 100°C (212°F), VI=100
Pour point : -15°C (5°F)
Solubility : Insoluble in water.

10 . Stability and reactivity

Chemical stability : The product is stable.
Hazardous polymerization : Under normal conditions of storage and use, hazardous polymerization will not occur.
Materials to avoid : Reactive with oxidizing agents, acids and alkalis.
Hazardous decomposition : May release COx, NOx, SiOx, formaldehyde, hydrocarbons, smoke and irritating vapours
products when heated to decomposition.

Date of issue : 3/5/2014. Internet: lubricants.petro-canada.ca/msds Page: 4/7

TM
Petro-Canada is a Suncor Energy business Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG COMPRESSOR FLUID 68 Page Number: 5

11 . Toxicological information

Acute toxicity
Product/ingredient name Result Species Dose Exposure
Mixture of severely hydrotreated and LD50 Dermal Rabbit >2000 mg/kg -
hydrocracked base oil (petroleum).
LD50 Oral Rat >5000 mg/kg -
LC50 Inhalation Rat >5.2 mg/l 4 hours
Dusts and mists
Conclusion/Summary : Not available.
Chronic toxicity
Conclusion/Summary : Not available.
Irritation/Corrosion
Conclusion/Summary : Not available.
Sensitizer
Conclusion/Summary : Not available.
Carcinogenicity
Conclusion/Summary : Not available.
Classification
Product/ingredient name ACGIH IARC EPA NIOSH NTP OSHA
Mixture of severely hydrotreated and A4 - - - - -
hydrocracked base oil (petroleum).
Mutagenicity
Conclusion/Summary : Not available.
Teratogenicity
Conclusion/Summary : Not available.
Reproductive toxicity
Conclusion/Summary : Not available.

12 . Ecological information
Environmental effects : No known significant effects or critical hazards.
Aquatic ecotoxicity
Conclusion/Summary : Not available.
Biodegradability
Conclusion/Summary : Not available.
Other adverse effects : No known significant effects or critical hazards.

13 . Disposal considerations
Waste disposal : The generation of waste should be avoided or minimized wherever possible. Significant
quantities of waste product residues should not be disposed of via the foul sewer but
processed in a suitable effluent treatment plant. Dispose of surplus and non-recyclable
products via a licensed waste disposal contractor. Disposal of this product, solutions
and any by-products should at all times comply with the requirements of environmental
protection and waste disposal legislation and any regional local authority requirements.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Care should be taken when handling emptied containers that have not been
cleaned or rinsed out. Empty containers or liners may retain some product residues.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers.
Disposal should be in accordance with applicable regional, national and local laws and regulations.

Date of issue : 3/5/2014. Internet: lubricants.petro-canada.ca/msds Page: 5/7

TM
Petro-Canada is a Suncor Energy business Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG COMPRESSOR FLUID 68 Page Number: 6

13 . Disposal considerations
Refer to Section 7: HANDLING AND STORAGE and Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
for additional handling information and protection of employees.

14 . Transport information
Regulatory UN number Proper shipping Classes PG* Label Additional
information name information
TDG Classification Not - - - -
regulated.
DOT Classification Not available. Not available. Not available. - -

PG* : Packing group

15 . Regulatory information
United States
HCS Classification : Not regulated.
Canada
WHMIS (Canada) : Not controlled under WHMIS (Canada).
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and
the MSDS contains all the information required by the Controlled Products Regulations.
International regulations
Canada inventory : All components are listed or exempted.
United States inventory : All components are listed or exempted.
(TSCA 8b)
Europe inventory : All components are listed or exempted.
International lists : China inventory (IECSC): All components are listed or exempted.

16 . Other information
Hazardous Material : Health 1
Information System (U.S.A.)
Flammability 1
Physical hazards 0

Personal protection B

National Fire Protection :

Association (U.S.A.) Flammability
1
Health 1 0 Instability
Special

References : Available upon request.

TM
Trademark of Suncor Energy Inc. Used under licence.
Date of printing : 3/5/2014.
Date of issue : 5 March 2014
Date of previous issue : No previous validation.
Responsible name : Product Safety - KKB
Indicates information that has changed from previously issued version.

Date of issue : 3/5/2014. Internet: lubricants.petro-canada.ca/msds Page: 6/7

TM
Petro-Canada is a Suncor Energy business Trademark of Suncor Energy Inc. Used under licence.
PURITY TM FG COMPRESSOR FLUID 68 Page Number: 7

16 . Other information
For Copy of (M)SDS : Internet: lubricants.petro-canada.ca/msds

Telephone: 1-800-268-5850; Fax: 1-800-201-6285

For Product Safety Information: (905) 804-4752

Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.

Date of issue : 3/5/2014. Internet: lubricants.petro-canada.ca/msds Page: 7/7

TM
Petro-Canada is a Suncor Energy business Trademark of Suncor Energy Inc. Used under licence.