Congratulations!

Thank you for choosing the Sound Blaster Tactic3D Rage USB gaming headset. You are
about to experience the legendary audio quality of Sound Blaster on your PC or Mac®.

The Sound Blaster Tactic3D Rage USB combines the legendary acoustic engineering prowess of the
Sound Blaster team to create a world-class gaming headset with next-generation sound technology.
The Sound Blaster Tactic3D Rage USB gives you full, uncompressed gaming audio enhanced with the
SBX Pro Studio for incredible realism and 3D.

System Requirements

Minimum Requirements
l Intel® Pentium™ IV - 1.6GHz or equivalent AMD/Mac processor
l 512 RAM for Windows® Vista®
l USB1.1 or USB2.0 port
l Microsoft® Windows 8 32-bit or 64-bit; Windows 7 32-bit or 64-bit; Windows Vista 32-bit or 64-
bit with Service Pack 1 or higher; Windows XP 32-bit or 64-bit with Service Pack 2 or higher;
Mac OS® X 10.5.8 or higher

Recommended Requirements
l Intel Core™ 2 Duo 2.0GHz or faster
l 1GB RAM
l Internet connection to download the drivers and applications available for this product

l 600MB of free hard disk space

Note:
Due to programming changes, the recommended system requirements for the software and
applications may change over time.
Your Headset At a Glance
Sound Blaster Tactic3D Rage USB Gaming Headset

1 - Adjustable headband

2 - Detachable noise-cancelling microphone

1 - Microphone mute LED

2 - Microphone jack
4 3 - 4-pole analog jack
1
4 - Volume control wheel
2
5 - Micro-USB port

3 5
Using Your Sound Blaster Tactic3D Rage USB
Here we explain how to use the headset including the following procedures:

l Setting Up for Initial Use

l Adjusting the Volume
l Connecting to Smart Devices
l Usage Scenarios

Setting Up for Initial Use

Step 1 : Connect the headset

Connect your headset to a computer using the MicroUSB to USB cable. The headset earcup will light up
once the headset is properly connected.

Step 2 : Set the default audio device (Mac OS ONLY)

1. Go to System Preferences and click Sound.
2. Select "Sound Blaster Tactic(3D) Rage USB" in both the Output and Input tabs.

Step 3 : Wear it
Adjust the headband so that the headset rests lightly on your head. Do not tighten excessively.
Step 4 : Downloading and Installing the Software
Your headset is now ready for use. However, you can enhance your audio and voice experience via an
optional software package that can be downloaded and installed into your PC. We recommend that you
download and install this software to make full use of all the features that your headset is equipped
with.

Note:
Please ensure that your headset is plugged into your computer before downloading and installing
the software.

For Windows
1. Using a standard web browser, visit creative. and locate the software package for the
Windows operating system for your product.
2. Download this package into your local hard disk.

3. Locate and launch the software package.

4. Follow the on-screen instructions to complete the installation.
5. When prompted, restart your computer.
6. Launch the application by clicking Start > Programs or All Programs > Creative > Sound
Blaster Tactic(3D) > Sound Blaster Tactic(3D) Control Panel".

For Mac
1. Using your web browser, visit creative and locate the software package for the Mac OS for your
product.
2. Download this package into your local hard disk.

3. Double-click the downloaded file to uncompress it.

4. Double-click the uncompressed DMG file.
5. Double-click the Install icon and follow the subsequent on-screen instructions to complete the
installation.
6. Launch the application from the Applications > Creative > Sound Blaster Tactic(3D) >
Sound Blaster Tactic(3D) Control Panel.

For more details on the software and the various features it has to offer, please refer to Using the
Software.
Adjusting the Volume
The Volume Control Wheel on the headset cup can be used to adjust your headset
volume to a comfortable level. You can also adjust the volume via the software or
the in-built volume settings on your computer.

CAUTION:
Do not listen to audio on your headset at high volumes for prolonged periods of
time to avoid impairing your hearing.

Connecting to Smart Devices

Enjoy the power of the Sound Blaster Tactic3D Rage USB gaming headset on-the-go with portable
smart devices including iPhones, android phones and tablets. Simply connect the headset using the 4-
pole to 4-pole analog cable. The headset draws power directly from the smart device for operation.

Note:
Ear cup illumination and SBX Pro Studio enhancements are not available when the headset is
connected to any device via the 4-pole jack.

If both the analog cable and the USB cable are connected to the same device (such as on a
laptop), the USB cable connection is prioritized unless manually configured otherwise.
Usage Scenarios

Playing Games
Your headset is equipped with cutting edge audio technologies and software to enhance the audio in
your games. SBX Pro Studio will elevate your gaming experience to the next level, allowing you to
hear sound details in games you have never heard before! For more details on the various SBX Pro
Studio effects and their setup, please refer to Using the Software

Restoring Audio Effects in Games with Creative ALchemy

When playing DirectSound® 3D on Windows 8, Windows 7 and Windows Vista, the game loses its
immersiveness and environmental effects due to changes in audio architecture.

To restore these effects and experience the full audio immersion, follow the steps below:

Enable Windows XP compatibility mode

1. Navigate to the folder where your game is installed.
2. Right-click on the game's launcher and select Properties.
3. Select the Compatibility tab and select the Compatibility Mode checkbox.
4. Click the Compatibility Mode drop-down arrow and select Windows XP (Service Pack 2), then
click OK.

Enable the game in Creative ALchemy

1. Click Start > Programs or All Programs > Creative > ALchemy > Creative ALchemy.
The game should be detected automatically and appear in the left column.
2. Select the game and click ">>" to move it to the right column.
3. Close the application.

When you launch the game, you should hear the original effects.

Note:
If the game is not detected, do the following:
- Navigate to the folder where you have installed the game.
- Right-click the game's launched and select "Run as administrator".
- Exit the application and launch Creative ALchemy again. The game should now appear in the
left column.

Communicating with Voice over Internet Protocol (VoIP)

Use the headset to enjoy outstanding acoustic performance in popular VoIP applications like Ventrilo®
and TeamSpeak®. Hear and be heard clearly by teammates during multiplayer games to get the
tactical edge.
Using the Software
A specialized software for the Sound Blaster Tactic3D Rage USB is developed to provide additional
enhancements to the audio and voice inputs and outputs of the product. The software bundle supports
a range of operating systems including:

l Windows 8, Windows 7, Windows Vista

l Mac OS X 10.5.8 or higher
To take full advantage of your headset, we recommend downloading and installing this software into
your computer.

Notes:
Some applications are available only for certain operating systems. To learn more about each
application, please consult its respective Online Help.

Installation and Uninstallation - Windows

For Windows OS, the following applications are included in the software bundle:

l Sound Blaster Tactic(3D) Control Panel

l Creative Software AutoUpdate
l Online Product Registration
l Creative System Information
l Creative ALchemy
l Host OpenAL
l Creative Driver

Installing
Notes:
Please ensure that your product is connected to the computer running the installation.

1. Using a standard web browser, visit creative and locate the software package for the
Windows operating system for your product.
2. Download this package into your local hard disk.

3. Locate and launch the software package.

4. Follow the on-screen instructions to complete the installation.
5. When prompted, restart your computer.
 6. Launch the application by clicking Start > Programs or All Programs > Creative > Sound
Blaster Tactic(3D) > Sound Blaster Tactic(3D) Control Panel.

This software includes a number of configurations that help you control the basic functions of your
product plus several software enhancement configurations that can be made to heighten your
product's performance. Click each of the menu bars to expand the configurations available.

Uninstalling
In the event that an uninstallation is required (such as for upgrades), please follow the following
procedure.

1. Click Start > Control Panel > Uninstall a program.

2. Select the Sound Blaster Tactic(3D) entry.
3. Click the Uninstall button.
If the User Account Control dialog box appears, click the Continue button.
4. Click the Yes button.
5. When prompted, restart your computer.
Installation and Uninstallation - Mac
For Mac OS, the following applications are included in the software bundle:

l Sound Blaster Tactic(3D) Control Panel

l Product Registration
l Creative Uninstaller
l Creative Driver

Installing
Notes:
Please ensure that your product is connected to the computer running the installation.

1. Using your web browser, visit creative and locate the software package for the Mac OS for your
product.
2. Download this package into your local hard disk.

3. Double-click the downloaded file to uncompress it.

4. Double-click the uncompressed DMG file.
5. Double-click the Install icon and follow the subsequent on-screen instructions to complete the
installation.
6. Launch the application from the Applications > Creative > Sound Blaster Tactic(3D) >
Sound Blaster Tactic(3D) Control Panel.
This software includes a number of configurations that help you control the basic functions of your
product plus several software enhancement configurations that can be made to heighten your
product's performance. Click each of the menu bars to expand the configurations available.

Uninstalling
In the event that an uninstallation is required (such as for upgrades), please follow the following
procedure.

1. Click Applications > Creative > Creative Uninstaller.

2. Select the Creative products to be uninstalled.
3. Click the Uninstall button.
4. Follow the on-screen instructions.
Using the Sound Blaster Tactic(3D) Control Panel
The rest of this chapter explains how to use the Sound Blaster Tactic(3D) Control Panel to view and
adjust the various features of your Sound Blaster Tactic3D Rage USB. The examples and screenshots
below uses Windows as an example. The user interface for other operating systems may differ
slightly.

Managing Your Profiles

The Sound Blaster Tactic(3D) Control Panel comes equipped with a set of pre-
configured profiles to suit your different needs including:

l First Person Shooter

l Action and Adventure
l Driving Simulation
l Real Time Strategy

To activate a profile,

1. Click the main "Sound Blaster Tactic(3D) Control Panel" bar to view the
main screen of the software.
2. Click the down arrow and select your desired profile from the list.

To modify and save changes to the active profile,

1. Navigate through the various other menu options of the Sound Blaster Tactic(3D) Control Panel
and modify the configurations as desired.
2. Return to the main interface and click [Save] to save the current settings to the active profile.

To delete the active profile, click the [Delete] button.

You can also share profiles among your friends and other gamers using the [Import] and [Export]
functions.

Note:
Tactic profiles for Windows and Mac are not compatible with each other.
Customizing Your Display Avatar

You can customize your control panel display avatar to an image of your choice.
Simply double-click the current avatar and choose an image file from the list.

Adjusting Your Volume Settings

Drag the headset or microphone volume marker to adjust the volume level.

You can mute/unmute the headset and/or microphone by clicking their respective
icons.

Configuring your general settings

You can change the language settings or restore settings to their default values.

Click from the top right corner of the interface and select the option from the list.
Enhancing the Audio - SBX Pro Studio
SBX Pro Studio enhances the audio output of your product using software optimizations. To configure
SBX Pro Studio, click the "SBX Pro Studio" menu option on the left.

1. Click the checkbox next to one or more of the available enhancements to enable it.
2. Adjust the level of enhancements to be applied individually.
3. Click to play the demo video to test your configurations.
4. Readjust if necessary.
SBX Pro Studio includes a number of enhancements for movies and gaming, elevating your movie and
gaming experience to the next level. These include:

l SBX Crystalizer - restores the natural dynamic range that is lost when music files (iTunes and
MP3) gets compressed. This makes the music sound as good as the artist originally intended,
and adds an enhanced level of realism for movies and games.
l SBX Surround - provides immersion control to enhance the natural sense of audio depth and
spaciousness by creating virtual surround sound channels. Stereo content or multi-channel
content will sound as if its coming from all sides while voices remain centered in front and
original balance and timbre is preserved.
l SBX Bass - fills in the missing low frequency tones and gives the extra impact for a better enter-
tainment experience. Consumers no longer have to tolerate a lack of bass in speakers as the
SBX Bass technology dramatically improves the sound experience even in the absence of a
subwoofer.
l SBX Dialog Plus - enhances the voices in movies for clearer dialog, allowing the listener to
hear the dialog over the rest of the soundtrack and over ambient noise in the listening envi-
ronment.
l SBX Smart Volume - addresses the problem of abrupt volume level changes during playback
and between songs by continously measuring volume automatically, applying gain and atten-
uation intelligently to compensate for any changes.
Enhancing the Microphone - VoiceFX™
To configure VoiceFX settings, Click the "VoiceFX" menu option on the left.

1. Select the VoiceFX checkbox to enable this feature.

2. Select a VoiceFX preset from the drop down menu and click [Test]. Speak into your microphone
to listen to your voice with the selected VoiceFX preset applied.
3. Use the sliders below to adjust the VoiceFX settings as desired. Test and readjust as necessary.
4. Click [Save] to save the adjusted settings into a new preset or click [Delete] to delete the
active preset.
Note:
The default list of VoiceFX presets cannot be deleted.
Equalizer Settings
Equalizers allows you to filter various audio frequency, thus controlling the tone of your audio output.
The Sound Blaster Tactic(3D) Control Panel comes equipped with a range of preset equalizer settings,
helping you to select different audio tones easily. You can also manually modify or add equalizer
presets.

To view the Equalizer Settings interface, select "Equalizer" from the menu. To apply and adjust an
equalizer preset,

1. Check the EQ checkbox to enable the use of the equalizer.

2. From the drop down menu, select the preset to use.
3. Adjust the vertical slider bars to achieve your desired level.
4. Click [Save] to save the changes to the active preset or to a new preset.
You can also delete any user created equalizer presets by selecting the preset from the drop down
menu and clicking [Delete].

Notes:
All default equalizer presets cannot be deleted.
Customizing the Illumination and Theme
The Sound Blaster Tactic3D Rage USB illuminated earcups support up to 16 million colors, allowing you
to create a headset that is uniquely you. You can select your desired color through the Sound Blaster
Tactic(3D) Control Panel.

Select "SB Prism" from the menu to view the interface.

1. Click the "Select RGB Color" option and use the color picker below to select a LED color for your
headset.
2. From the drop down menu, select the idle time before the LED is switched to standby mode.
3. Adjust the Intensity and Pulsation settings for the LED using the two slider bars.
4. The "Pulsate along with tune" option enables the earcup LED illumination to pulsate according to
the currently playing music track.
General Specifications
Connectivity
l One 3.50mm (1/8") stereo jack for detachable microphone
l One 3.50mm 4-pole analog jack

Interfaces
l Micro-USB port for connection to computers

SBX Pro Studio Technology

l SBX Crystalizer
l SBX Surround
l SBX Bass
l SBX Dialog Plus
l SBX Smart Volume
Troubleshooting
What do the various LED statuses mean?
The Sound Blaster Tactic3D Rage USB headset is equipped with various LEDs that indicate the status of
the device. Each LED, their possible statuses and corresponding explanations are listed in the tables
below:

Headset LEDs

LED Status Description

Stable / Pulsating Headset is turned on.

Earcup LED
Off Headset is off.

Stable (Red) Microphone is muted.

Microphone Mute LED
Off Microphone mute is off.

The onboard audio chipset seems to be in conflict with Sound Blaster Tactic3D Rage
USB.
Disable your computer's onboard audio chipset. See your computer's motherboard documentation for
details.

No sound from the headset.

Check the following:

l The volume settings in Sound Blaster Tactic(3D) Control Panel and system audio are properly
adjusted and not muted.
l There is no hardware conflict between the headset and a peripheral device.

There is clipping/distortion during audio playback.

Your computer system should be running in high performance mode. You may need to disable any
power saving features.

Some features are disabled when playing certain games.

When playing games that use DirectSound3D or OpenAL sound engines, certain audio features will be
disabled automatically. This is to avoid distorting the environmental audio cues present in the
game. These features will be re-enabled automatically when you exit the game.
Safety Information
Refer to the following information to use your product safely, and to reduce the chance of electric
shock, short-circuiting, damage, fire, hearing impairment or other hazards. Improper handling
may void the warranty for your product. For more information, read the warranty
available with your product.

l Read these instructions.

l Keep these instructions.
l Heed all warnings.
l Follow all instructions.
l Do not use this apparatus near water.
l Clean only with dry cloth.
l Do not block any ventilation openings. Install the product in accordance with the instructions.
l Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
l Do not expose your product to temperatures outside the range of 0°C to 40°C (32°F to 104°F).
l Do not pierce, crush or set fire to your product.
l Keep your product away from strong magnetic objects.
l Do not subject your product to excessive force or impact.
l Protect the cables from being walked on or pinched, particularly at the plugs, convenience
receptacles and the point where they exit from the apparatus.
l Only use attachments/accessories specified by the manufacturer.
l Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with
the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
l Unplug the apparatus during lightning storms or when unused for long periods of time.
l Do not dismantle or attempt to repair your product.
l Refer all servicing to authorized and qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply cord is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.
l WARNING: To reduce the risk of fire or electric shock, do not expose your product to water or
moisture. If your product is moisture-resistant, take care not to immerse your product in water
or expose it to rain.

Earphones
l When a conductive apparatus, such as earphones, is used in close proximity with a CRT
television or CRT monitor, the latter may emit an electrostatic discharge. The electrostatic
discharge can be felt as a static short. While this static shock is usually harmless, it is good
practice to avoid close contact with CRT devices when using earphones.
l Do not listen to audio on your earbuds or headphones at high volume for prolonged periods of
time as hearing loss may result.

l Do not listen to your audio device at high volume when driving, cycling or crossing the road,
especially in heavy traffic or any other traffic condition where such use will hinder safe travel on
the roads. We recommend that consumers be extremely cautious when using this device on the
road.
Avoid Hearing Damage
Permanent hearing loss may occur if the Sound Blaster Tactic3D Rage USB headset is used at high
volume. Set the volume to a safe level. You can adapt over time to a higher volume of sound that may
sound normal but can be damaging to your hearing. If you experience ringing in your ears or muffled
speech, stop listening and have your hearing checked. The louder the volume, the less time is required
before your hearing could be affected. Hearing experts suggest that to product your hearing:

l Limit the amount of time you use the Sound Blaster Tactic3D Rage USB headset at high volume.
l Avoid turning up the volume to block out noisy surroundings.
l Turn the volume down if you can't hear people speaking near you.
 Sound Blaster Tactic3D Rage Wireless Charging the Headset
The headset should be charged for 8 hours before its first use. Simply
connect the headset to your computer via the Micro USB-to-USB cable,
ensuring that the headset is turned OFF during this initial charge process.

USB wireless Micro

transmitter USB-to-USB
cable

Micro USB-to-USB cable

Volume
Noise-canceling Microphone Control Wheel
Mute Power Button
microphone
Microphone
Jack The power LED flashes while the headset is charging and will turn off once
Micro USB port charging completes.
for charging

Download and Install Supporting Software

Connecting the Headset
To enjoy the full features of your headset, we recommend that you install the
Connect the USB drivers and applications.
wireless transmitter
to your computer’s Download the Software Package
USB wireless USB port. 1.Visit creative
3D
Sound Blaster Tactic transmitter
Your headset is
2. Click the Sound Blaster Tactic3D Rage Wireless Gaming Headset
product link.
Rage Wireless paired to the USB
wireless transmitter
3. Click “Download”. You will be directed to the software download page.
Please ensure that you download the appropriate package for your
out of the box. If you operating system.
need to pair your
headset manually
(such as in the event
of errors), please
refer to the online
user guide for details.
Installation – Windows XP and later
1. Plug the USB wireless transmitter to your computer.
2. If prompted for the audio drivers, click [Cancel].
3. Locate and double-click the downloaded software file.
4. Follow the instructions on screen to complete the installation.
5. If prompted, restart your computer.
6. Launch the application by clicking “Start > Programs or all Programs >
Creative > Sound Blaster Tactic(3D) > Sound Blaster Tactic(3D)
Control Panel”.
Power on
the headset

Model No.: GH0220 Quick Start Installation – Mac® OS 10.5 and above
1. Plug the USB wireless transmitter to your computer.
2. Double-click the downloaded file to uncompress it.
3. Double-click the uncompressed DMG file.
4. Double-click the Install icon.
5. Follow the instructions on screen to complete the installation.
6. Go to System Preferences and click Sound. Select Sound Blaster
Tactic(3D) Rage Wireless in both Output and Input tabs.
Wear the headset, adjusting the 7. Launch the application from the Applications folder.
headband so that the headset rests lightly on
your head without being excessively tight. Using this application, you can configure various audio and voice
enhancement settings such as SBX Pro Studio and Voice FX.

Adjust the volume to a comfortable

level using the volume wheel.

CAUTION: Do not listen to audio on your

headset at high volumes for prolonged periods
of time as hearing loss might result.

Congratulations! Your headset is ready for use without any software.

Using the Headset

Using the Headset while Charging
After the initial 8hr charging process, your headset can be used while it is
charging. The USB wireless transmitter must remain connected to your
computer’s USB port. The power LED flashes white while charging and
stabilizes when fully charged.
 Sound Blaster Tactic3D Rage USB Download and Install Supporting Software
To enjoy the full features of your headset, we recommend that
you install the drivers and applications.

Download the Software Package

1. Visit creative
2. Click the Sound Blaster Tactic3D Rage USB Gaming
Headset product link.
3. Click “Download”. You will be directed to the software
download page. Please ensure that you download the
Micro USB-to-USB cable appropriate package for your operating system.

Volume
Noise-canceling Microphone Control Wheel
Mute Installation – Windows XP and later
microphone 1. Plug the headset to your computer.
Microphone Jack
2. If prompted for the audio drivers, click [Cancel].
4-pole Analog Jack* Micro USB port 3. Locate and double-click the downloaded software file.
4. Follow the instructions on screen to complete the
*Use the headset with your smart devices with the 3.5mm 4-pole to 4-pole cable (available installation.
separately). 5. If prompted, restart your computer.
6. Launch the application by clicking “Start > Programs or
all Programs > Creative > Sound Blaster Tactic(3D) >
Using the Headset Sound Blaster Tactic(3D) Control Panel”.

Installation – Mac® OS 10.5 and above

3D 1. Plug the headset to your computer.
Sound Blaster Tactic 2. Double-click the downloaded file to uncompress it.
3. Double-click the uncompressed DMG file.
Rage USB 4. Double-click the Install icon.
5. Follow the instructions on screen to complete the
Micro USB-to-USB installation.
cable
6. Go to System Preferences and click Sound.
Select Sound Blaster Tactic(3D) Rage USB in both Output
and Input tabs.
7. Launch the application from the Applications folder.

Using this application, you can configure various audio and voice
enhancement settings such as SBX Pro Studio and Voice FX.

Model No.: GH0230 Quick Start

Connect the USB cable from the headset’s micro USB
port to your computer’s USB port. The headset powers on
automatically once properly connected.

Note: You can also connect your headset to smart devices or

MP3 players via the 4-pole analog jack (cable available
separately). Please refer to the online user guide for more
information.

Please note that ear cup illumination and SBX Pro Studio
enhancements are not available when the headset is
connected to any device via the 4-pole jack.

Wear the headset,

adjusting the headband so
that the headset rests lightly
on your head without being
excessively tight.

Adjust the volume

to a comfortable level using
the volume wheel.

CAUTION: Do not listen to

audio on your headset at high
volumes for prolonged periods
of time as hearing loss might
result.

Congratulations! Your headset is ready for use without any

software.