Eletronics 111 Eec 244 ND 11
Eletronics 111 Eec 244 ND 11
Eletronics 111 Eec 244 ND 11
(a)
LAGOS CITY POLYTECHNIC, IKEJA
Draw a simple circuit
Vcc diagram of AND
SCHOOL OF ENGINEERING
a single stage amplifier and explain how
APPLIED SCIENCE
amplification takes place.
DEPARTMENT OF ELECT/ELECT AND COMPUTER ENGINEERING
+
(b) 2018/2019between
Differentiate SEMESTERamplifier
EXAMINATION
and oscillator
o
COURSE
2. (a) TITLE:
An amplifierELECTRONICS
has a gain of 5000III
without feedbackNO
and OF
cut offQUESTION : f =
frequencies are 6
N 1
COURSE CODE: EEC 244 TIMEe ALLOWED: 2 HRS
5KHZ and of2 = 800 KHZ. If 10% of outputR voltage of the amplifier, is
FOR WHOM: ND II EE FT INSTRUCTIONS: ANSWER
applied
ANY as negative feedback, what are theL new cut-off frequencies?
o
FOUR
(b) Mention
QUESTIONS five(5)50 applications of negative feebback.
k
1. (a) Draw a simple circuit diagram
WR of a single stage amplifier and explain how
amplification takes place.
3. (a) (i) Differentiate
6RW between
2
Oscillator and an Alternator
R1
(b) Differentiate between amplifier and oscillator
(ii) What is the function of oscillator in radio broadcasting?
2. (b)
(a) In
Anaamplifier
Collopittshas
oscillator
a gain ofand findwithout
5000 the frequency
feedbackofand
oscillation if inductance
cut off frequencies areLf1==
10mHenry, C = 5mF, C2 = 10mFarad,
5KHZ and f12 = 800 KHZ. If 10% of output voltage of the amplifier, is
where CT = C1C2
applied as negative feedback, what are the new cut-off frequencies?
C1 + C2
(b) Mention five(5) applications of negative feebback.
4. (a) (i) Differentiate between Noise and Distortion
3. (a) (i) Differentiate between Oscillator and an Alternator
(ii) Give three(3) examples of Piezoeletric crystal
(ii) What is the function of oscillator in radio broadcasting?
(b)
(b) In a Collopitts oscillator and find the frequency of oscillation if inductance L =
10mHenry, C1 = 5mF, C2 = 10mFarad,
where CT = C1C2
C1 + C2
(b)
The figure above shows a negative voltage amplifier. If without feedback, Av = 5000.
Find:
(i) Feedback fraction and
(ii) Gain with feedback
5. (a) The application of negative feedback in amplifier may become an oscillator and
produce unwanted signals:
(i) State the conditions under which will happen