Scribd
Upload
31 views4 pages

ET Tutorial Sheet 3

This document contains 10 problems related to analyzing three-phase electrical networks. Problem 1 asks to find line currents, power consumed by the load, and line losses given a wye-connected load connected through a transmission line with specified impedances. Problem 2 asks to find line currents for a delta-connected load supplied by an ideal source. Problem 3 asks to find the circuit elements of a delta-connected load given the power consumption and current.

Uploaded by

Nick Fury
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views4 pages

ET Tutorial Sheet 3

This document contains 10 problems related to analyzing three-phase electrical networks. Problem 1 asks to find line currents, power consumed by the load, and line losses given a wye-connected load connected through a transmission line with specified impedances. Problem 2 asks to find line currents for a delta-connected load supplied by an ideal source. Problem 3 asks to find the circuit elements of a delta-connected load given the power consumption and current.

Uploaded by

Nick Fury
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Tutorial Sheet-3 (Three Phase Networks)

1. A high-voltage generator is connected to a 3-phase wye connected load through


a transmission line. Each phase of the line has impedance Zl, and the load is a
balanced wye with branch impedance Z. Line to line voltage, |Vab| = 45kV, Zl =
(0.5 + j3) Ω, Z = (4.5 + j9) Ω. Find the line currents, power consumed by the load
and line losses. Draw the phasor diagram.
[Ans. 𝐼𝑎 = 2∠ − 67.38° A, 𝐼𝑏 = 2∠172.62° A, 𝐼𝑐 = 2∠52.62° A, 𝑃𝑙𝑜𝑎𝑑 = 53.99 MW,
𝑃𝑙𝑖𝑛𝑒 = 6 MW]

2. A balanced 3-phase a-b-c system with line-to-line voltage Vab = 20800 V


supplies to a balanced  connected load of 3 kW with a power factor of 0.8 (lag)
through ideal conductors. Find the line currents. Draw the phasor diagram.
[Ans. 𝐼𝑎 = 10.41∠ − 66.9° A, 𝐼𝑏 = 10.41∠173.1° A, 𝐼𝑐 = 10.41∠53.1° A]

3. A balanced 3-phase delta connected load of 160 kW, connected to a balanced line
voltage of 1100 V, 50 Hz, takes a leading current of 100 A. Find the circuit
elements of the load per phase.
[Ans. 𝑅𝑝ℎ = 16 Ω, 𝐶𝑝ℎ = 307.87 μF]

4. Calculate the value of 𝑋𝐶 in Fig. 1 such that the combined circuit behaves as a
three-phase balanced resistive network. [Ans. 37.5 Ω]
5. For the 3-phase balanced system of Fig.2 calculate the current phasors IR1 and IR2
as marked in the figure with R-phase supply voltage as reference (sequence be
RYB). Each Z=10∟300 Ω and each Z1=30∟−900 Ω.
[Ans. 𝐼𝑅1 = 23.094∠ − 30° A, 𝐼𝑅2 = 23.094∠30° A]

Fig. 2.

6. For the circuit shown in Fig. 3, calculate the branch currents of the ∆ connected
load and the active and reactive power consumed by it.
[Ans. 𝐼𝑅𝐵 = 5.75∠ − 30° A, 𝐼𝐵𝑌 = 5.78∠90° A, 𝐼𝑅𝑌 = 5.78∠ 30° A, P = 499 W, Q =
499 VAR]

IRB
B IBY IYR

Fig. 3.

7. In the circuit of Fig. 4, A three phase balanced voltage source is supplying power
to a three-phase load as shown in Fig. 3. Calculate the line currents.
[Ans. 𝐼𝑎 = 41.55∠ − 44.86° A, 𝐼𝑏 = 41.55∠ − 164.86° A, 𝐼𝑐 = 41.55∠75.14° A]
Load

8. A wattmeter reads 5.54 kW when its current coil is connected in R phase and its
voltage coil connected between the neutral and the R phase of a symmetrical 3-phase
system supplying a balanced load of 30 A at 400 V. What will be the reading on the
instrument if the connections to the current coil remain unchanged and the voltage
coil be connected between B and Y phases? Take phase sequence RYB. Draw the
corresponding phasor diagram. [Ans. 7.2 kW]

Fig. (b)
Fig. (a)

9. Calculate the readings of the two


wattmeters (W1 and W2) connected to
measure the total power for a balanced
delta-connected load fed from a three-
phase, 400 V balanced supply with phase
sequence as R-Y-B as shown in Fig.5. The
load impedance per phase contains
capacitive reactance, Xc=14 Ω and
resistance, R=14 Ω.
[Ans. W1 = 13.52 kW, W2 = 3.623 kW] Fig. 5
10. Figure 6 shows a balanced 3-phase, 3 wire system with positive phase sequence. Let
𝑉𝑉�𝐵𝐵𝐵𝐵 = 120∠600 V and 𝑅𝑅𝑊𝑊 = 0.6 Ω. If the total load (including wire resistance) draws 5
kVA at p.f.= 0.8 lag, find (a) the total power loss in the wire resistance, (b) 𝑉𝑉�𝑎𝑎𝑎𝑎 .
[Ans: 823.56 W, 78.96∠143.470 ]

Fig. 6

You might also like