Scribd
Upload
37 views2 pages

S-3012 Engl

BöttcherFount S-3012 is a fountain solution additive for sheet-fed offset printing that provides stable ink-water balance, higher ink densities, and plate protection. It can be used with conventional or film dampening systems for water hardness up to 25° dH. The standard dosage is 2-3% but can be increased to 6-8% for IPA reduction. It prevents foam, increases conductivity, and allows for fast restarts and long print runs.

Uploaded by

FAP Matbaa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
37 views2 pages

S-3012 Engl

BöttcherFount S-3012 is a fountain solution additive for sheet-fed offset printing that provides stable ink-water balance, higher ink densities, and plate protection. It can be used with conventional or film dampening systems for water hardness up to 25° dH. The standard dosage is 2-3% but can be increased to 6-8% for IPA reduction. It prevents foam, increases conductivity, and allows for fast restarts and long print runs.

Uploaded by

FAP Matbaa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Systems  Printing

BöttcherFount S-3012
Fountain Solution Additive

Application
BöttcherFount S-3012 is a fountain solution additive for sheet-fed offset.
For soft and hard water.

standard dosage 2 - 3 %
for IPA-reduction to 6 - 8 %
very stable ink-/water balance
reduced and stable water pick up of the ink, therefore higher ink densities obtained
fast restarts and stable printing for long runs

Features
for conventional and film dampening systems
good printing plate protection
for water hardness 0 - 25° dH (total hardness)
pH-value 4.9 - 5.2 (according to water hardness)
suitable for UV printing as well
effective prevention of foam
increased conductivity per % input: 480 μS/cm
density 1.05 (kg/l)

Before applying BöttcherFount S-3012, the fountain system must be completely emptied and
Note

cleaned thoroughly, preferably using BöttcherPro Slimex.


Use BöttcherPro Calcit as a re-hardener for Ro- and soft water.
Systems  Printing

Package
20 kg can
200 kg drum

Marking
BöttcherFount S-3012 is classified and marked in accordance with EC-Directive 1999/45/EC – in
its latest version. BöttcherFount S-3012 is not a dangerous good in the sense of national and
international transport regulations.

All our product information sheets, as well as our contact data you will find on the internet www.boettcher-systems.com.

Felix Böttcher GmbH & Co. KG


Headquarter
Stolberger Str. 351 - 353
50933 Cologne, Germany
Phone +49 (0) 221 4907 - 1
Fax +49 (0) 221 4907 - 435
[email protected]

Böttcher production sites


Böttcher sales offices
www.boettcher.de/contact Böttcher representations

The purpose of these technical data is to assist our customers. We list general experience and laboratory test. Translation of these to actual applications
is, however, subject to a variety of factors which are beyond our control. We ask for understanding that claims can not be based upon them.

You might also like