alchimica.

com

Page 1/5

AQUASMART® HYBRID

Very Fast Drying, Water based, Fully Aliphatic Polyurethane

Hybrid Coating for Waterproofing and Protection

DESCRIPTION
AQUASMART® HYBRID is a water based, very FEATURES & BENEFITS
fast drying, aliphatic Polyurethane hybrid coating • Water based
for waterproofing and protection. The product • Very fast drying
may be applied as a one-component material • Easy to apply & repair.
(under the commercial name AQUASMART® • Thixotropic
HYBRID-MONO) or can be used with a second • Seamless.
component (booster) during cold weather for • Elastic.
faster curing (under the commercial name • Highly resistant to stagnating water (ensure
AQUASMART® HYBRID-2K). proper adhesion-see suitable primers list).
The product is easily applied on both vertical and • Water vapor transmission: The film breathes so
horizontal substrates and forms a seamless, there is no accumulation of humidity under the
elastic and hydrophobic membrane. coat.
Apply with brush, roller or airless spraying in two • Excellent weather and UV resistance. The white
or more coats. The quantity applied is depending color reflects much of the solar energy and so
on the final use requirements. reduces the internal temperature of structures
considerably.
COMPLIANCE - CERTIFICATION • Easy coloring of product with almost any water
CE certified acc. ETAG 005, Part 1 & Part 6 based pigment paste available at hardware
No: CPR-17/0922-COAT (AQUASMART HYBRID). stores, subject to adequate tests.
CE certified acc. EN 1504-02:2004 • Compatible with all standard ALCHIMICA’s
Νο: 2085-CPR-082 (AQUASMART HYBRID MONO). Primers.
See table below.
APPLICATION PREREQUISITES
RECOMMENDED FOR Can be successfully applied on:
Waterproofing and Protection of: Concrete, fibrous cement, cement roof tiles,
• PU foam, wood, galvanized steel, PU foam. For information
• Roofs, about other substrates, please contact our tech
• Light roofing made of metal or fibrous cement, department.
• Under tile applications such as wet rooms
• Protection of concrete/reinforced concrete from Standard concrete substrate conditions:
carbonization • Hardness: R28 = 15 Mpa.
LIMITATIONS • Humidity: W < 10%.
Not recommended for: • Temperature: 5-35 oC.
• Unsound substrates: (in some cases, application • Relative humidity: < 85%.
is possible with the use of geotextile
reinforcement; please contact our technical
department for consultations).

Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & ISO 45001.
AQUASMART HYBRID /EE/19-03-2020
 alchimica.com

Page 2/5

AQUASMART® HYBRID

Do not apply under conditions of

Suitable primers: AQUADUR, AQUASMART®-
extreme wet weather or imminent rain or near
DUR, AQUASMART®-PU PRIMER-2K or
freezing temperature.
MICROSEALER-50, depending on the substrate.
Please contact our technical department for
primer selection advice. CONSUMPTION
• Applied with roller or brush -
First coat: 0.6-0.8 kg/m2.
APPLICATION PROCEDURE
Second coat: 0.6-0.9 kg/m2.
Clean the substrate using a high-pressure washer,
• Applied by airless spraying: 0.5 kg/m2 per coat.
if possible. Remove oil, grease and wax
Minimum total consumption: >1.5 kg/m2 for
contaminants. Cement laitance, loose particles,
waterproofing, depending on project
mould release agents, cured membranes must
requirements.
also be removed. Surface irregularities should
For use as a protective paint, recommended
also be filled.
consumption is 0,5 Kg/m2.

Priming:
Apply recommended primer according to CLEANING
Technical Data Sheet specifications. Clean tools and equipment immediately with
water.
For non- demanding applications (where standing
water or negative water pressure is not an issue) PACKAGING
prime with same material by diluting with 15% Plastic pails of 12 kg (+125 gr booster), 20 kg
water. For more professional applications, apply (+ 200 gr booster)
primers as per above list or contact our technical
department for further information. SHELF LIFE
Can be kept for 12 months minimum in the
Mixing: original unopened pails in dry places and at
Use a low speed (300 rpm) mixer. temperatures of 5-25 oC. Once opened, use as
soon as possible. Protect from freezing conditions.
Application:
Apply with roller, brush or airless spraying in two SAFETY INFORMATION
or more coats. The MSDS (Material Safety Data Sheet) is
available on request.

Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & ISO 45001.
AQUASMART HYBRID /EE/19-03-2020
 alchimica.com

Page 3/5

AQUASMART® HYBRID
TECHNICAL SPECIFICATIONS

In liquid form (before application):

70% active substance.

PROPERTY UNITS METHOD SPECIFICATION

Viscosity (Brookfield) cP ASTM D2196-86, @ 25 oC 20,000-40,000

ASTM D1475 / DIN 53217 / ISO 2811,

Specific weight gr/cm3 1.45-1.55
@ 20 oC
Required application oC - >5
temperature

In cured form (after application):

PROPERTY UNITS METHOD SPECIFICATION

Service temperature oC - -20 to 90

Hardness Shore A ASTM D2240 / DIN 53505 / ISO R868 70

Tensile strength at break @ Kg/cm2 50

ASTM D412 / EN-ISO-527-3
23 oC (N/mm2) (5.0)
Elongation @ 23 oC % ASTM D412 / EN-ISO-527-3 > 300

H2O absorption % - <5

QUV Accelerated Weathering

Test (4hr UV, @ 60 oC (UVB- passed
- ASTM G53
Lamps) & 4hr COND @ 50 (2,000 hours)
oC)

Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & ISO 45001.
AQUASMART HYBRID /EE/19-03-2020
 alchimica.com

Page 4/5

AQUASMART® HYBRID

CLASSIFICATION ACCORDING TO EOTA (EUROPEAN ORGANISATION OF TECHNICAL APPROVAL)

No: CPR-17/0922-COAT (AQUASMART HYBRID)

19
ALCHIMICA S.A.
7 Lampsakou, Athens-GREECE
CPR-17/0922-COAT
ETAG 005, Part 1 & Part 6
1219
AQUASMART-HYBRID
Liquid Applied Roof Waterproofing Kit, Based on Polyurethane
www.alchimica.com

REQUIREMENT PERFORMANCE HARMONIZED TECHNICAL

SPECIFICATION
Minimum thickness 1.6mm ETAG 005 – part 6
Water vapour diffusion
resistance factor (μ) ~890 ETAG 005 – part 6
Resistance to wind loads >50KPa ETAG 005 – part 6
Statement on dangerous
substances Does not contain any ETAG 005 – part 6
External fire performance NPD ETAG 005 – part 6
Expected working life W2 (10 Years) ETAG 005 – part 6
Climatic zone of use S (Severe) ETAG 005 – part 6
User loads P1 to P3 (P3 REINFORCED) ETAG 005 – part 6

Roof slopes S1 to S4 ETAG 005 – part 6

Minimum surface temperatures TL3 (-20oC) ETAG 005 – part 6
Maximum surface TH4 (90oC) ETAG 005 – part 6
temperatures

Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & ISO 45001.
AQUASMART HYBRID /EE/19-03-2020
 alchimica.com

Page 5/5

AQUASMART® HYBRID

CLASSIFICATION ACCORDING TO EN 1504-02

No: 2085-CPR-082 (AQUASMART HYBRID MONO)

19
ALCHIMICA S.A.
7 Lampsakou, Athens-GREECE
2085-CPR-082
EN 1504-2:2004
2085
AQUASMART-HYBRID MONO
Liquid Applied Roof Waterproofing Kit, Based on Polyurethane
www.alchimica.com

Harmonized technical
Essential characteristics Performance
specification
CO2 permeability, m SD>50
SD<5
Permeability to water vapor, m
Class I
Capillary absorption, kg/m2.h0.5 w<0.1
Adhesion strength by pull-off test, N/mm2 ≥1.5
Abrasion resistance, mg <3000 EN 1504-2:2004
≥4
Impact resistance, N.m
Class I
Reaction to fire Euroclass F

NONE OF OUR PUBLISHED INSTRUCTIONS AND SPECIFICATIONS, IN WRITING OR OTHERWISE, ARE BINDING EITHER IN GENERAL OR
WITH RESPECT TO ANY THIRD PARTY RIGHTS, OR DO THEY RELIEVE INTERESTED PARTIES OF THEIR DUTY TO SUBJECT THE PRODUCT TO
AN ADEQUATE EXAMINATION OF ITS SUITABILITY. IN NO EVENT WILL ALCHIMICA S.A. BE RESPONSIBLE FOR DAMAGES OF ANY NATURE,
WHATSOEVER, RESULTING FROM THE USE OF OR RELIANCE UPON INFORMATION OR THE PRODUCT TO WHICH INFORMATION REFERS.
ALCHIMICA S.A. RESERVES THE RIGHT TO CHANGE AT ANY TIME THE PROPERTIES OF ITS PRODUCTS. PLEASE REFER TO THE CURRENT
VERSION OF THE TECHNICAL DATA SHEET, AVAILABLE FROM OUR WEB SITE WWW.ALCHIMICA.COM

Certified quality, environmental and occupational health & safety management systems:
ISO 9001/14001 & ISO 45001.
AQUASMART HYBRID /EE/19-03-2020