Id 075 - 09 04 2008

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

TYPICAL TUNING DIAGRAMS

CX 4m series
VHF Base Station Antennas 68...88 MHz

NOTE:
L is the lenght indicated in the above pictures.
It is recommended to use the curves just as a guide. Fine-tuning by using an SWR-Meter.

HI-QUALITY ANTENNAS MADE IN ITALY


B Copyright SIRIO antenne - Technical Data are subjected to change - Printed in ITALY - Rev. 09/04/2008 - Cod. ID075
Installation Manual
DESCRIPTION
3/4 λ VHF antenna for base station service made of high quality materials to get the best
performance and the maximun efficiency. It is completely manufactured with aluminium tubes
and nylon for its great robustness and it is supplied with a solid steel bracket for an easy and safe
installation. Its Gamma Match feed makes it earthed for a perfect protection against the static
discharges. Simple and strong, it is particularly recommended for a professional use.

SPECIFICATIONS
Electrical Data
Type : 3/4 λ Coax. J-Pole
Frequency Range : CX 4-68 from 68 to 73 MHz tunable by diagram
: CX 4-73 from 73 to 78 MHz tunable by diagram
: CX 4-78 from 78 to 83 MHz tunable by diagram
: CX 4-83 from 83 to 88 MHz tunable by diagram
Impedance : 50 Ω Unbalanced
Radiation (H-plane) : 360o Omnidirectional
Radiation (E-plane) : Beamwidth at -3 dB = 60o
Radiation angle deg. : 3o
Polarization : Vertical
MOUNTING INSTRUCTIONS
Gain : 2 dBd - 4.15 dBi
Bandwidth @ SWR 1.5 : CX 4-68 ≥ 1.7 MHz @ 68 MHz
: CX 4-73 ≥ 2.0 MHz @ 73 MHz
: CX 4-78 ≥ 2.5 MHz @ 78 MHz
: CX 4-83 ≥ 2.5 MHz @ 83 MHz
SWR @ res. freq. : ≤ 1.2
Max Power : 500 Watts
Feed System / Position : Gamma Match / Base
Connector : UHF Female

Mechanical Data
Materials : Nylon, Brass, Steel, Aluminium
Wind Load / Resistance : 97 N at 150 Km/h / 150 Km/h
Wind Surface : 0.08 m2
Height (approx.) : from 2700 to 3360 mm
Weight (approx.) : 1900 gr
Mounting Mast : ∅ 35-42 mm Correct mounting on mast Wrong mounting on mast

HARDWARE PARTS LIST


Qty Descriptions
n.2 M6x160 U-bolts
n.4 M6 Flat washer
n.4 M6 Lock washer
n.4 M6 Hex nut
n.1 M4x4 Hexagon socket set screw
See tuning diagrams next
HI-QUALITY ANTENNAS MADE IN ITALY n.1 2mm Exagonal key
page
n.1 ∅10mm PVC cap
ID075

You might also like