Scribd Logo
Upload

Welcome to Scribd!

  • 11 views

    Be Winter 2018

    Uploaded by

    Swastik Panchal
    This document is an exam for the subject Analysis of Mechanisms & Machine Elements. It contains 5 questions covering various topics related to kinematic pairs, mechanisms, machine elements, joints, welding, pressure vessels and riveting. The exam is worth a total of 70 marks and students are instructed to attempt all questions and make suitable assumptions where necessary. Diagrams, formulas and definitions are tested.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Be Winter 2018

    Uploaded by

    Swastik Panchal
    11 views2 pages
    This document is an exam for the subject Analysis of Mechanisms & Machine Elements. It contains 5 questions covering various topics related to kinematic pairs, mechanisms, machine elements, joints, welding, pressure vessels and riveting. The exam is worth a total of 70 marks and students are instructed to attempt all questions and make suitable assumptions where necessary. Diagrams, formulas and definitions are tested.

    Original Title

    2130103-BE-WINTER-2018

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is an exam for the subject Analysis of Mechanisms & Machine Elements. It contains 5 questions covering various topics related to kinematic pairs, mechanisms, machine elements, joints, welding, pressure vessels and riveting. The exam is worth a total of 70 marks and students are instructed to attempt all questions and make suitable assumptions where necessary. Diagrams, formulas and definitions are tested.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    11 views2 pages

    Be Winter 2018

    Uploaded by

    Swastik Panchal
    This document is an exam for the subject Analysis of Mechanisms & Machine Elements. It contains 5 questions covering various topics related to kinematic pairs, mechanisms, machine elements, joints, welding, pressure vessels and riveting. The exam is worth a total of 70 marks and students are instructed to attempt all questions and make suitable assumptions where necessary. Diagrams, formulas and definitions are tested.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Seat No.: ________ Enrolment No.

    ___________

    GUJARAT TECHNOLOGICAL UNIVERSITY


    BE - SEMESTER–III (New) EXAMINATION – WINTER 2018
    Subject Code:2130103 Date:28/11/2018
    Subject Name:Analysis Of Mechanisms & Machine Elements
    Time:10:30 AM TO 01:00 PM Total Marks: 70
    Instructions:
    1. Attempt all questions.
    2. Make suitable assumptions wherever necessary.
    3. Figures to the right indicate full marks.

    Q.1 (a) Define Coriolis components of acceleration. When it 03


    occurs?
    (b) Differentiate between Riveted and Welded joints. 04
    (c) Explain different types of kinematic pairs. State 07
    difference between Mechanism & Machine.

    Q.2 (a) What information do you get by Velocity & Acceleration 03


    diagrams?
    (b) Explain Stress-Strain relationship for ductile materials. 04
    (c) Explain different inversions of four bar chain 07
    mechanism.
    OR
    (c) Derive an expression for the inertia force due to 07
    reciprocating mass in reciprocating engine, neglecting
    mass of the connecting rod.
    Q.3 (a) Define following terms. (1) Kinematic link (2)Kinematic 03
    pair (3)Kinematic chain
    (b) Classify Pressure vessels. 04
    (c) A Whitworth quick-return mechanism has been shown in 07
    Fig.1. The dimensions of the links are OP (crank) =
    240mm, OA =150 mm, AR =165 mm and RS =430 mm.
    The crank OP has an angular velocity of 2.5 rad/s and an
    angular deceleration of 2 rad/s2 at the instant. Determine
    Velocity of the slider S.
    OR
    Q.3 (a) Differentiate Butt joint & Lap joint with sketch. 03
    (b) What is Caulking and Fullering? 04
    (c) For the above mentioned problem of Whitworth quick- 07
    return mechanism in Fig.1, determine Acceleration of the
    slider S.
    Q.4 (a) State D-Alembert’s principle. 03
    (b) Briefly explain Electric arc welding. 04
    (c) A cylindrical vessel 2m long and 500mm in diameter 07
    with 10mm thick plates is subjected to an internal
    pressure of 3MPa. Calculate the change in volume of the
    vessel. Take E= 200GPa and Poisson’s ratio= 0.3 for the
    vessel material.
    OR
    Q.4 (a) Why the designs of pressure vessels are commonly either 03
    spherical or cylindrical?
    (b) Explain Thermit welding with neat sketch. 04

    1
    (c) Derive expression for Thin cylindrical shell subjected to 07
    an internal pressure.
    Q.5 (a) What should be the properties of Shaft material? 03
    (b) What are Longitudinal and Hoop stresses? 04
    (c) Define following terms. (1)Spindle (2)Axle (3)Shaft 07
    (4)Thin shell pressure vessel (5)Thick shell pressure
    vessel (6)Single riveted lap joint (7)Zigzag riveting
    OR
    Q.5 (a) List Advantages and Disadvantages of Welded Joints. 03
    (b) Define (1) Factor of Safety (2)Poission’s ratio 04
    (c) Classify different types of Riveted joints. Explain why 07
    Butt joint with single cover is stronger than lap joint for
    the same thickness and riveting configurations?

    *************

    You might also like