PEER Bearings For Gearboxes

Bearing Solutions for All Industrial Gearbox Types
Not all gearbox types can be treated the same! When designing a gearbox or reducer, many factors need to be considered to meet
application and commercial requirements. Low noise levels, speed to market, cost-effectiveness and durability play a significant
role in the success of a gearbox design. PEER understands this and applies proven experience to the industrial gearbox market
to effectively integrate bearing solutions that are reliable and cost-effective. Major gearbox OEM’s rely on PEER’s range of deep
groove ball bearing (DGBB) and tapered roller bearing (TRB) solutions to meet their performance expectations and keep their
gearboxes running…and so should you!
PUTTING OUR PRODUCTS TO WORK FOR YOU

Bearing Type Our Product Value Gearbox Usage
• Engineered internal geometry for longer service life under pinion misalignment
Single Row TRB
• Tighter stack height for ease of assembly and stack-up control

• Optimized internal design to consistently control backlash during operation
• Less friction at higher speed to improve operating efficiency
WORM
Matched Pair TRB
• Prepackaged as a set to reduce assembly time

• Predetermined bench end play eliminates risk of improper bearing setting
• High torque capacity to increase service life in power dense gearbox designs
BEVEL
• Optimized for less friction at higher speed to improve operating efficiency
• Available sealed or shielded to retain grease when large shaft offsets are used
• Low running noise/vibration to improve operating efficiency
DGBB
• Ease of application mounting reduces assembly costs

PARALLEL SHAFT
• Cost-effective alternative to more expensive bearing types
All bearing solutions apply to gearboxes
shown above
www.peerbearing.com
Leveraging PEER’s Technical Service
PEER‘s knowledgeable and industrial
PERFORMANCE gearbox-focused Application Engineers
collaborate with your technical team to
PREDICTION ANALYSIS
select the best bearing solution to meet
the needs of your application in a cost-
effective way.
BEARING FEATURE
THE PEER BENEFIT
SELECTION
• Globally interchangeable inch and
metric solutions allow drop-in
replacement for existing and
SHAFT AND HOUSING FIT new gearbox designs.
SELECTION • Application-specific solutions reduce
internal bearing stress and extend
bearing and gearbox life.
CAD PRINTS AND • Industry-focused Application

Engineers provide bearing selection
3D MODELING
competence to support your
product development.
• Partner supplier provides proven
BEARING REVIEW operational reliability and cost-
ANALYSIS effective solutions to major
industrial gearbox OEM’s.
Product Characteristics Tapered Roller Bearing Deep Groove Ball Bearing

Bore Size 15-200mm 3-150mm
Outside Diameter 35-260mm 10-240mm
Ring/Roller Material Through Hardened Through Hardened
Precision Classes ISO Metric: normal P6x ABEC1, ABEC3, ABEC5
Inch: Class4, Class2, J line
Metric: ClassK, ClassN
Width or Stand Height Tolerance (T) 1/2, 1/4 -
Heat Stabilization S0,S1,S2,S3 S0,S1,S2,S3
Solutions Standard (Radial load) Open, Sealed, Shielded
XT (Misalignment)
Seal Material - Nitrile (Buna-N), Polyacrylic (Hycar®), Fluoroelastomer (Viton®)
Lubrication - Low Temp, High Temp, Food Grade
China Italy
Shanghai PEER Bearing Co., Ltd. PEER Bearing S.R.L.
9/F, Tower B, Central Towers Via Paolo Nanni Costa, 12/3 A
#567 Langao Road 40133 Bologna, Italy
Putuo District, Shanghai, P.R. China Phone: +39 051 6120405
Phone.: +86 21 61484816 [email protected]
[email protected]
United States
Germany PEER Bearing Company
PEER Bearing GmbH 2200 Norman Drive
Gruitener Str. 23 Waukegan, IL 60085, USA
40699 Erkrath, Germany Phone: +1 847 578 1000
Phone: +49 2104 1 42 63 -0 [email protected]
[email protected]
Brazil ® PEER is a registered trademark of the PEER Group of Companies.
PEER Bearing Comércio de Rolamentos Ltda. ™ Trusted Difference at Every Turn is a trademark of the PEER Group of Companies.
Av. Marginal do Ribeirão dos Cristais, 200
Bloco 1100, Jordanésia – Cajamar-SP, Brazil
CEP 07775-240
Phone: +55 11 4448-8200
[email protected]

PEER Bearings For Gearboxes

Uploaded by

Copyright:

Available Formats

PEER Bearings For Gearboxes

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PEER Bearings For Gearboxes

Uploaded by

Copyright:

Available Formats

Bearing Solutions for All Industrial Gearbox Types

PUTTING OUR PRODUCTS TO WORK FOR YOU

• Tighter stack height for ease of assembly and stack-up control

• Prepackaged as a set to reduce assembly time

• Ease of application mounting reduces assembly costs

CAD PRINTS AND • Industry-focused Application

Product Characteristics Tapered Roller Bearing Deep Groove Ball Bearing

You might also like