GmbH

Systems for Concrete

Product Catalogue
© Contec GmbH 2016

www.contecgmbh.com
 Systems for Concrete

Screed Rail Poker Bull Beams and

“Combi-Form“ Vibrators Floats Screeds SVF

4 5 6-7 8-9

!www.contecgmbh.com
 Index

Beams and Roller Power Double Spreader

Screeds SVM Screed Trowels ride-on Waggon
Trowels

10 - 11 12 - 13 14 - 20 21 22

!www.contecgmbh.com
 Screed Rail ‘combi-form‘
Systems for Concrete
Technical Data

Combi-Form Contractor Advantages:

- can be assembled immediately prior to concreting
- is suitable for all beddings
- precise height for more accurate calculations
- high flatness tolerances in conjunction with beams
- saves the construction of and dismantling of
additional systems
- ensures stronger floor joints
- saves labour and production costs
- reduces the risk of industrial injury
- easy transport and low weight
- saves green waste
- consistent level floors
- minimises maintenance costs

w w w. c o n t e c g m b h . c o m 4
 Mechanical & electrical Poker Vibrators
Systems for Concrete

PVD mechanical Mechanical light weight flexible

poker vibrator shaft pokers.

3-part system consisting of drive

unit (230 V / 2.0 kW 4.8 kg) and
vibrator flexible shaft.

Immersion vibrator diameter in

25, 32, 48, and 58 mm - flexible
shaft available in 1, 2, 3 and 4 m
versions.

PVE electric poker vibrator and Electric pokers PVE for connection
PVCE convertor to a frequency converter.
Immersion vibrator with 5 m hose
and 10 m cable (standard)
42 Volt / 200 Hz.
Bottle diameter in 38, 50, 58 and
65 mm.

Electrical converters PVCE 2.5

available in 230V and 400V with
2.5 kVA and 35 A with 2 slots.
Weight only 21 kg.

Electric internal vibrator with

PVEL Poker vibrator with integrated frequency converter
integrated Frequency Convertor for connection to 230V mains.

Immersion vibrator with 5 m hose

and 15 m cable (standard).

Motor with 42 Volt / 200 Hz output

frequency / 1.5 kW and 12,000 rpm.

Immersion vibrator diameter in

38, 50, 58 and 65 mm.
Switch is contained in special
absolute tight and impact-resistant
aluminum-plastic housing.

5 w w w. c o n t e c g m b h . c o m
 Vibrating Bull Floats
Systems for Concrete

Technical Data

Working width: 2.00 m BFP-HAL

Power: 8,500 rpm (petrol engine)

11,000 rpm (electric engine)

Engine: 4-Stroke-Honda or 230 V

Weight: 17 kg / 15 kg

Technical Data

Working width: 1.80 bis 4.85 m Westernscreed

Power: 1.3 PS Honda GX 35

Weight-drive unit: 13 kg

Vibration unit in Aluminium housing

Handle and profile made of chromed steel

and aluminium alloys

7 www.contecgmbh.com
 Bull Floats
Systems for Concrete

HAND BULL FLOAT

After application of the screed, finishing work
begins immediately on the accurately levelled
compacted concrete surface.

For subsequent smoothing, hand Bull Floats with a

working width of up to 2 metres and guiding rods of
up to 12 metres can be used.

The surface is then finely smoothed and

irregularities levelled out. If necessary, a broom
finish is brushed over the fresh concrete surface.

classic “Bull Float“

Available in working widths of 1.20 and 1.50 m with rounded corners. Weight 5.6 / 6.6 kg

BULL FLOAT WITH BRUSH

includes handle extension for the subsequent

smoothing of fresh concrete and the insertion of a
brush stroke.

Bull float working width 1.20 m, (120x 12 cm)

Weight without extension handle 12kg.

Brush attachment with 12cm bristle length including

set of 3 piece extension rods.
(L=1.8 m rods)
with spring snap close on the rod end.

Mode of operation / swivel joint

w w w. c o n t e c g m b h . c o m 6
 Beams and Screeds SVF
Systems for concrete

lifting brackets Aluminium profile

with integrated
tensioning rope

Technical Data

Electric Engine 400 Volt

Power 450 W
Engine speed (motor shaft) 3,000 rpm
Centrifugal 490 N/m
Protective class IP 65
Max. working width 7.20 m
Weight of vibrating unit 15 kg
Weight of frame 3.20 m 32 kg
Weight of frame 4.20 m 41 kg
Weight of frame 5.20 m 47 kg
Weight of frame 6.20 m 57 kg
Weight of frame 7.20 m 70 kg
Sound pressure level LWA 106 dB(A)
Sound pressure 95 dB(A)
Hand vibration according to ISO 5349 4.5 m/s²
in fresh concrete
Compaction depth Up to 15 cm
Advanced rate Ca. 1 m/min

w w w. c o n t e c g m b h . c o m 8
 Beams and Screeds SVF
Systems for concrete

- robust, lighweight frame with lifting brackets

- working widths up to 7.20 m
- eveness according to DIN 18.202
- adjustable vibration
- easy to transport, quick and easy installation without special tools
- less cleaning and maintenance
- maintenance-free electric- motor-drive
- exact height guidance with cantilever guage system
- compaction up to 15 cm bei 2,800 vibrations per minute

for use in bridge formwork “solid track”

slabs in pre-cast concrete lightweight concrete

9 w w w. c o n t e c g m b h . c o m
 Beams and Screeds SVM
Systems for Concrete

A system with countless possibilities and various

accessories to cope with all your building projects

adjustable at each joint 100% compatible with any electric winch (optional)
of the frame elements series built after 1993

petrol drive toothed belt drive

with belt tensioner

Technical Data
Engine electric / petrol 400 Volt 16 A / Honda GX200
Power 2.2 kW / 4.8 kW (6.5 HP)
Engine speed (motor shaft) 2,830 rpm / 2,300 rpm
Centrifugal 500 N/m
Protection class IP 65
Max. working width 25 m
Weight of drive gable / incl. E-winch 61 / 63 kg
Weight of end gables 25 kg
Weight 0.50 m / 0.75 m / 1.00 m 22 kg / 24 kg / 26 kg
Weight 2.00m 42 kg
Weight 3.00m 64 kg
Dimension drive (L x W x H) 300 x 400 x 950 mm
Dimension end gables (L x W x H) 150 x 400 x 950 mm
Dimensions Section (B x H) 400 x 556 mm
Sound level LWA 106 dB(A)
Sound pressure 95 dB(A)
Hand vibration according to ISO 5349 in 4.5 m/s²
fresh concrete

w w w. c o n t e c g m b h . c o m 10
 Beams and Screeds SVM
Systems for Concrete

Screed in robust construction-kit-system. Proven and tested for over 20 years on construction
sites all over Germany. From 2013 new up-to-date design which meets EU-Safety directives

Achieving absolute flat surfaces in road, bridge and utility projects

- lightweight, self-supporting aluminum truss structure

- working widths up to 25 m evenness according to DIN 18 202
- consistent level through integrated winches guarantees optimum compaction
- optional electric winch propulsion saves on operating personnel
- easy to transport, easy to install without special tools
- low cleaning and maintenance
- aluminum struts with powder coating
- all galvanized steel components, drive shafts in stainless steel
- kink-joint setting on the frame shock +/- 5%
- guard on rotating parts (drive shaft), reduced vibration levels to operator handle according to
the most recent regulations
- electric or petrol engines
- power transmission via toothed drive belt
- exact height guidance via cantilever arm and guage system
- compaction up to 18 cm at 2,800 oscillations per minute.
- 100% compatible with all SVE, Vario and Variant systems from 1993

11 w w w. c o n t e c g m b h . c o m
 Roller Screed
Systems for Concrete
Canal Embankments up to 60 °/ Ramps Achieves absolutely flat surfaces in road construction

Technical Data

Motor drive unit 400 Volt / 16 A

alternative Honda-petrol-
engine
Power 5.5 kW / 13 HP

Pump flow rate 11 l/min / max. 250 Bar

Working width Up to 6 m
(more lengths on request)
Roll diameter 168 mm
Drive unit weight 220 kg
(incl. cart)
petrol version Roller weight 20 kg per metre

www.contecgmbh.com 12
 Roller Screed
Systems for Concrete
Roller Screeds - the CONTEC System

The use of roller screeds in the concrete construction industry has been employed for many years. More recently there
have been an increasing number of new and interesting applications and procedures on the market.

Mode of operation:
The CONTEC System involves a high performance hydraulic drive unit (5.5 kW) which can turn a steel roller up to 6 m wide
and 168 mm in diameter (up to 250 rpm) against freshly poured concrete.
Guide tracks or an individually adjustable gauge system determine the levelling depth. The concrete is then compacted
and the granulation is forced to the surface.

Application:
The use of sliding friction instead of vibration means the system is perfect for slopes where the deployment of conventional
beams and screeds are impossible - e.g. river and canal embankments, steep roofing surfaces, ski jumps and such.

Apart from this, individual concrete structures such as special screeds – drain concrete and sub layers are made possible
without the use of vibration, i.e. without segregation processes and levelling.

Also in road construction, the use of the CONTEC System in levelling and smoothing after beam and screed applications
has proved to be very successful.

The additional use of the roller screed corrects unevenness, thickness or ripples and removes slurry from the surface. The
result is an absolute even, compacted concreted area.

The construction of the hydraulic drive unit places particular importance on robustness and easy maintenance.
The steel roller is exceptionally low maintenance and can be cleaned easily in minutes with a brush and water or a high
pressure cleaner.

13 www.contecgmbh.com
 Power Trowel TR 600 P / E
Systems for Concrete

Light, robust trowel with rolling ring for edging and

for small areas - either as petrol or electric version

Petrol version

Equipment

- robust and permanently lubricated worm gear

- reliable and environmentally friendly 4-stroke Honda engine
or 230 volt electric motor
- adjustable height on handle
- foldable handle for transportation
- lifting brackets and protective frame in standard or "Heavy Duty"version
- high working speed
- increased protection and rolling ring - ideal for edging
- steel parts galvanized for maximum corrosion protection
- blade adjustment for rotating or in "Quick Pitch" version
- press-lock for easy blade change without tools
- transport wheels optional

15 w w w. c o n t e c g m b h . c o m
 Power Trowel TR 600 P / E
Systems for Concrete

230 Volt Electric Version with speed control

- ideal for operation in closed areas

‘Quick-Pitch‘
quick wing adjustment
on request

Technical Data TR 600 P / E

Motor Petrol / Electric Honda GX160 / 230 Volt 50 Hz
Power 5.5 HP / 1.5 kW
Engine Speed (motor shaft) 3,600 rpm / 2,810 rpm
Working Speed 50 – 150 rpm / 130 rpm
Tank capacity 3.1 liter / -
Weight (standard version with lifting brackets 65 kg / 63 kg
and long draw bar)
Weight transport wheels 2.6 kg
Diameter protective ring 600 mm
Working diameter 595 mm (disc) 581 mm (blade)
Handle range 1640 mm
Height of working position 980 mm
Max. height of drawbar for transport 870 mm
Noise level, LWA 94 dB(A) / 93 dB(A)
Noise pressure level (measured at operator ear) 83 dB(A) / 70 dB(A)
Hand vibration according to ISO 5349 on fresh 5.2 m/s² / 1.4 m/s²
concrete with the use of levelling disc

w w w. c o n t e c g m b h . c o m 14
 Power Trowel TR 750 P / E
Systems for Concrete

Light, robust Power Trowel - in petrol or

electric versions for smaller areas and screeds

„Heavy-Duty“ version incl.

wheels for transport

Equipment

- robust and permanently lubricated worm gear

- reliable and environmentally friendly 4 stroke -Honda engine or 400 Volt
electric engine with speed control
- height adjustable handle, extremely long
- folding handle for transportation
- lifting brackets and protective frame in standard or ‘heavy duty‘ version
- high working speed
- steel parts galvanised for maximum corrosion protection
- blade adjustment for rotation in “Quick- Pitch“ version
- press-lock for easy blade change without tools
- optional transport wheels

w w w. c o n t e c g m b h . c o m
17
 Power Trowel TR 750 P / E
Systems for Concrete

400 Volt electric version with speed control

- ideal for operation inclosed areas

“Quick-Pitch“
quick blade adjustment
on request

Technical Data TR 750 P/ E

Engine petrol / electric Honda GX200 / 400 Volt with speed control
Power 6.5 HP /2.2 kW
Engine speed (motor shaft) 3,600 rpm
Working speed 50 – 150 rpm / 40 – 135 rpm
Tank capacity 3.1 liter / -
Weight (with lifting brackets and long handle) 71 kg / 72 kg
Weight transport wheels 3 kg
Diameter protective ring 750 mm
Working diameter disc / blade 745 mm / 728 mm
Range of handle long / short 1778 mm / 1740 mm
Height in working postion 1065 mm
Max. height of handle for transport 1446 mm
Noise level, LWA 96 dB(A) / 94 dB(A)
Noise level (measured at operator ear) 84 dB(A) / 77 dB(A)
Hand vibration according to ISO 5349 on 5.8 m/s² / 1.4 m/s²
fresh concrete with the use of levelling disc

w w w. c o n t e c g m b h . c o m
16
 Power Trowel TR 950 E
Systems for Concrete

Ideal for working in closed spaces

Blade adjustment “Quick- Pitch“ -

electric version available on request

folding handle

Technical Data TR 950 P/E

Engine petrol / electric Honda GX200-270 / 400 Volt with speed control
Power petrol / Electric 6.5 HP / 9.0 HP / 2.4 kW Electric
Engine speed (motor shaft) 3,600 rpm
Working speed 50 – 150 rpm / 60 – 120 rpm
Tank capacity 3.1 liter / -
Weight (with lifting brackets and longer handle) 93 kg / 90 kg
Weight of transport wheels 3 kg
Diameter of protective ring 950 mm
Working diameter disc / blade 945 mm / 935 mm
Handle range long / short 2325 mm / 1976 mm
Height of working position 1065 mm
Max. height of handle for transport 1446 mm
Noise level, LWA 97 dB(A)
Noise level (measured at operator’s ear) 85 / 83 dB(A) / 77 dB(A)
Hand vibration according to ISO 5349 on fresh 6.3 m/s² / 1.4 m/s²
concrete with the use of levelling disc

w w w. c o n t e c g m b h . c o m
18
 Power Trowel TR 950 P
Systems for Concrete

Ideal for working in closed spaces

Extra long handle allows easy, safe working

with minimum effort even when working
with problematic concrete or screeds

foldable handle

Equipment
- reliable Honda-4-stroke-engine with 6.5 - 9 HP / or maintenance-free 400 Volt electro engine
- robust and permanently lubricated worm gear
- height adjustable, extra long or short retractable handle
- lifting brackets and protective frame in standard or ‘heavy duty‘ version
- high working speed
- steel parts galvanized for maximum corrosion protection
- blade adjustment for rotation in “Quick-Pitch” version
- press-lock for easy blade change without tools
- optional transport wheels
- ergonomic control handle which includes all controls and manned operation

w w w. c o n t e c g m b h . c o m
19
 Power Trowel TR 950 P /SH
Systems for Concrete
Version with shorter handle
Equipment
- reliable Honda-4-stroke-engine with 6.5 - 9.0 HP
- robust and permanently lubricated worm gear
- steel parts galvanized for max. corrosion protection
- press-lock for easy blade change without tools
- lifting brackets & protective frame in standard or
‘heavy duty‘ version
- ergonomic control handle
- high working speed
- handle vertically adjustable
for easier transport

Blade adjustment
“Quick-Pitch“
available on request

Technical Data
Petrol engine Honda GX200-270
Power 6.5 HP / 9.0 HP
Engine speed (motor shaft) 3,600 rpm
Working speed 50 – 150 rpm
Tank capacity 3.1 liter
Weight (Standard version with lifting brackets ) 93 kg
Weight of transport wheels 3 kg
Diameter of protective ring 950 mm
Working diameter disc / blade 945 mm / 935 mm
Handle range 1976 mm
Height of working position adjustable
Max.height of handle for transport 1446 mm
Noise level, LWA 97 dB(A)
Noise pressure level (measured at operator’s 85 / 83 dB(A) / 77 dB(A)
ear)
Hand vibration according to ISO 5349 on fresh 6.3 m/s² / 1.4 m/s²
concrete with the use of levelling disc

w w w. c o n t e c g m b h . c o m
20
 Double ride-on Trowel BTL 900
Systems for Concrete

Equipment
- powerful worm gear
- 8 smoothing blades
- lifting brackets for easy transport Self drive double trowel with
- swivel transport castors integated suspension for
- electric starter smoothing and glazing
- upholstered seat large concrete areas
- halogen headlights and catalysator
on request (only with Kohler Engine)

Technical Data

Petrol Engine Kohler Command / Honda

Power 25 HP / 24 HP
Engine speed (motor shaft) 3,600 rpm
Working speed 50 – 150 rpm
Tank capacity 15 Liter
Weight 330 kg
Dimensions 133 x 202 x 101 cm (H x L x B)

21 w w w. c o n t e c g m b h . c o m
 Spreader Waggon
Systems for Concrete with screen roller
- easy loading with wide chute with slit blade for packing
- upper roll distributes hard material uniformly in the feed chute
- quick adjustment of dosage with locking mechanism on handle
- optimal support and weight distribution by broad driving grid roller
- secure sprinkling even with problematic concrete and screed conditions
- uniform sprinkling in both directions

Technical Data
Weight 36 kg
Working width 830 mm
Dimensions L/B/H 920 / 960 / 810 mm
Max. Quantity material per m² and single operation 3 kg
Capacity of feeder shaft 60 kg

w w w. c o n t e c g m b h . c o m
22
 GmbH
Maschinenbau & Entwicklungstechnik

i n f o @ c o n t e c g m b h . c o m
Constantly developing innovative Together with our experienced technicians, we
systems for concrete can offer professional advice to contractors in the
planning and concreting of large concrete
Since 1995 German machine manufacturer surfaces such as bridges, roads and utility
CONTEC GmbH have been offering the projects, the development of specific proposals
concrete, renovation and screed construction and the training of the personnel in dealing with
industries innovative and versatile machines. the specially developed technology directly on
Shot-blasters, milling and grinding machines for site.
surface preparation and concrete renovation At the same time the CONTEC office staff take
including the appropriate dust collection systems care of a quick supply of spare, wear and tear
are developed and manufactured at our factory in parts for our customers at home and abroad.
Alsdorf, in the Westerwald. Much of the machinery, parts and equipment are
In 2006, together with our sales and service kept in stock in Alsdorf or can be customized and
partners we acquired the German distribution of manufactured quickly according to your needs.
machinery for the field of concrete technology. We offer you:
The foundation for this new division are - innovative, well designed machine technology
techniques developed in Germany and which meets the most recent EU safety standards
Scandinavia and proven for many years. - new and further cutting edge developments in
The programme includes bull floats, beams and terms of shot blasting, milling and diamond
screeds, power trowels, roller screeds and grinding technology
spreader waggons. - specific solutions for the concreting of road and
Dortmund
industrial floor surfaces

Köln A4
Olpe Excellent cooperation and honest and fair
Freudenberg dealings with long-standing partners and
customers secure our success for the future!
Waldbröl Siegen
Kirchen 2
B6
A4

B256 Betzdorf
Simply call us and ask us for advice if you need
w w w . c o n t e c g m b h . c o m
5
A3

Wissen B62 Alsdorf Wilnsdorf

professional help with solutions for your
Daaden
Limburg B5
4
Herdorf construction project - we are happy to help!
Rennerod

Frankfurt am Main Frankfurt am Main

© CONTEC GMBH 2016

CONTEC GmbH Hauptstraße 146, 57518 Alsdorf, Germany 0049 (0) 2741 93440
23