S7pcshwb en-US
S7pcshwb en-US
Industrial Security 2
Preface 3
SIMATIC
ET 200SP HA 4
Process Control System PCS 7
Released modules (V9.1 SP2) 5
ET 200M
ET 200PA SMART+ 7
ET 200PA SMART 8
ET 200iS 9
ET 200iSP 10
ET 200S 11
ET 200SP 12
ET 200X 13
ET 200pro 14
valid for PCS 7 as of V9.1 SP2 UC02
Gateway 15
Repeater 16
Network Components 17
PC 18
PC-based automation 19
Process Control System PCS 7
Released modules (V9.1 SP2) 20
PCS 7 partner modules
S7-300 21
List Manual
S7-400 22
SIPLUS modules 23
Appendix A
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended or
approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance
are required to ensure that the products operate safely and without any problems. The permissible ambient
conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
1 Security information............................................................................................................................ 11
2 Industrial Security................................................................................................................................ 13
3 Preface ................................................................................................................................................. 15
4 ET 200SP HA......................................................................................................................................... 17
4.1 AI ...................................................................................................................................... 17
4.2 AQ..................................................................................................................................... 17
4.3 DI ...................................................................................................................................... 18
4.4 DQ..................................................................................................................................... 18
4.5 IM ..................................................................................................................................... 19
4.6 PM..................................................................................................................................... 19
4.7 TM..................................................................................................................................... 19
4.8 BusAdapter ........................................................................................................................ 19
4.9 SP modules........................................................................................................................ 20
5 ET 200M ............................................................................................................................................... 21
5.1 IM ..................................................................................................................................... 21
5.2 Accessories ........................................................................................................................ 22
6 Compact field unit ............................................................................................................................... 25
6.1 Compact field unit.............................................................................................................. 25
6.2 BusAdapter ........................................................................................................................ 25
7 ET 200PA SMART+ ................................................................................................................................ 27
7.1 AI ...................................................................................................................................... 27
7.2 AQ..................................................................................................................................... 27
7.3 DI ...................................................................................................................................... 27
7.4 DQ..................................................................................................................................... 28
8 ET 200PA SMART .................................................................................................................................. 29
8.1 AI ...................................................................................................................................... 29
8.2 AO..................................................................................................................................... 30
8.3 DI ...................................................................................................................................... 30
8.4 DO..................................................................................................................................... 31
8.5 IM ..................................................................................................................................... 31
8.6 Accessories ........................................................................................................................ 31
9 ET 200iS ............................................................................................................................................... 33
9.1 AI ...................................................................................................................................... 33
9.2 AO..................................................................................................................................... 33
9.3 DI ...................................................................................................................................... 34
9.4 DO..................................................................................................................................... 34
9.5 IM ..................................................................................................................................... 34
9.6 PS...................................................................................................................................... 34
9.7 Terminal module................................................................................................................ 35
10 ET 200iSP.............................................................................................................................................. 37
10.1 AI ...................................................................................................................................... 37
10.2 AI-F ................................................................................................................................... 37
10.3 AO..................................................................................................................................... 37
10.4 DI ...................................................................................................................................... 38
10.5 DI-F ................................................................................................................................... 38
10.6 DO..................................................................................................................................... 38
10.7 DO-F.................................................................................................................................. 39
10.8 IM ..................................................................................................................................... 39
10.9 PS...................................................................................................................................... 40
10.10 EM..................................................................................................................................... 40
10.11 Watchdog .......................................................................................................................... 40
10.12 Couplers ............................................................................................................................ 40
10.13 Terminal module................................................................................................................ 41
11 ET 200S ................................................................................................................................................ 43
11.1 AI ...................................................................................................................................... 43
11.2 AO..................................................................................................................................... 44
11.3 DI ...................................................................................................................................... 45
11.4 DO..................................................................................................................................... 46
11.5 FM..................................................................................................................................... 48
11.6 IM ..................................................................................................................................... 48
11.7 PS...................................................................................................................................... 49
11.8 Terminal module................................................................................................................ 50
11.9 Motor starter ..................................................................................................................... 52
11.10 F motor starter................................................................................................................... 57
11.11 Motor starter accessories ................................................................................................... 59
11.12 TM motor starter................................................................................................................ 59
12 ET 200SP .............................................................................................................................................. 61
12.1 AI ...................................................................................................................................... 61
12.2 AO..................................................................................................................................... 62
12.3 DI ...................................................................................................................................... 62
12.4 DO..................................................................................................................................... 63
12.5 IM ..................................................................................................................................... 63
12.6 Server module ................................................................................................................... 64
12.7 Bus adapter........................................................................................................................ 64
13 ET 200X ................................................................................................................................................ 67
13.1 AI ...................................................................................................................................... 67
13.2 AO..................................................................................................................................... 67
13.3 BM_DI................................................................................................................................ 68
13.4 BM_DO .............................................................................................................................. 68
13.5 DI ...................................................................................................................................... 68
13.6 DO..................................................................................................................................... 68
13.7 PS...................................................................................................................................... 69
13.8 Valve ................................................................................................................................. 69
14 ET 200pro ............................................................................................................................................. 71
14.1 AI ...................................................................................................................................... 71
14.2 AO..................................................................................................................................... 71
14.3 DI ...................................................................................................................................... 71
14.4 DO..................................................................................................................................... 72
14.5 F_DI................................................................................................................................... 72
14.6 F_DI/DO ............................................................................................................................. 72
14.7 IM ..................................................................................................................................... 72
14.8 PS...................................................................................................................................... 73
14.9 Connection modules .......................................................................................................... 73
15 Gateway ............................................................................................................................................... 75
15.1 PN/PN Coupler ................................................................................................................... 75
15.2 IE/PB Link ........................................................................................................................... 75
15.3 Y switch............................................................................................................................. 76
15.4 PA Link .............................................................................................................................. 76
15.5 FF Link............................................................................................................................... 77
15.6 Compact FF Link ................................................................................................................ 78
15.7 Y Link ................................................................................................................................ 78
19 PC-based automation........................................................................................................................... 95
19.1 PCS 7 AS RTX ..................................................................................................................... 95
20 PCS 7 partner modules ........................................................................................................................ 97
20.1 Buerkert ............................................................................................................................ 97
20.2 Buerk................................................................................................................................. 98
20.3 SICLOCK............................................................................................................................. 99
20.4 SITOP............................................................................................................................... 101
20.5 SIMOCODE....................................................................................................................... 102
20.6 SIMODRIVE ...................................................................................................................... 102
20.7 SINAMICS ........................................................................................................................ 102
20.8 SIWAREX.......................................................................................................................... 102
20.9 AS-i ................................................................................................................................. 102
21 S7-300 ................................................................................................................................................ 103
21.1 CP PtP .............................................................................................................................. 103
21.2 FM................................................................................................................................... 103
21.3 PS.................................................................................................................................... 104
21.4 SM DI............................................................................................................................... 104
21.5 SM DO ............................................................................................................................. 106
21.6 SM DI/DO......................................................................................................................... 109
21.7 SM DI-F............................................................................................................................ 109
21.8 SM DO-F .......................................................................................................................... 109
21.9 SM AI............................................................................................................................... 110
21.10 SM AO ............................................................................................................................. 112
21.11 SM AI-F............................................................................................................................ 113
21.12 SM MTA ........................................................................................................................... 113
22 S7-400 ................................................................................................................................................ 117
22.1 CPU as of 05/17 (as of PCS 7 V9.0) ................................................................................... 117
22.2 CPU as of 02/16 (as of PCS 7 V8.2) ................................................................................... 118
22.3 CPU as of 09/14 (as of PCS 7 V8.1) ................................................................................... 119
22.4 CPU as of 06/13 (as of PCS 7 V8.0.2) ................................................................................ 119
22.5 H-CPU as of 12/11 (as of PCS 7 V8.0) ................................................................................ 120
22.6 CPU as of 08/10 (as of PCS 7 V7.1.2) ................................................................................ 121
22.7 H-CPU as of 09/07 (as of PCS 7 V7.0.1) ............................................................................. 121
22.8 CPU as of 12/06 (as of PCS 7 V7.0) ................................................................................... 122
22.9 H-CPU as of 08/04 (as of PCS 7 V6.1) ................................................................................ 124
4.2 AQ
4.3 DI
4.4 DQ
4.5 IM
4.6 PM
4.7 TM
4.8 BusAdapter
Permissible transmission rate: 100 Mbit/s. You can find additional information about the
1)
4.9 SP modules
Approved combinations
See the SIMATIC Distributed I/O Device ET 200M manual for the approved combinations of
Interface Modules and Bus Modules and for the available functions.
5.2 Accessories
Approved combinations
See the "SIMATIC Distributed I/O Device ET 200M" manual for the approved combinations of
interface modules and bus modules and for the available functions.
6.2 BusAdapter
Permissible transmission rate: 100 Mbit/s. You can find additional information about the
1)
7.2 AQ
7.3 DI
7.4 DQ
8.2 AO
8.3 DI
8.4 DO
8.5 IM
8.6 Accessories
Accessories
9.2 AO
9.3 DI
9.4 DO
9.5 IM
9.6 PS
10.2 AI-F
10.3 AO
10.4 DI
10.5 DI-F
10.6 DO
10.7 DO-F
10.8 IM
10.9 PS
10.10 EM
10.11 Watchdog
10.12 Couplers
11.2 AO
11.3 DI
11.4 DO
11.5 FM
11.6 IM
11.7 PS
12.2 AO
12.3 DI
12.4 DO
12.5 IM
1)
Orderable via article number 6ES7155-6BA01-0CN0
13.2 AO
13.3 BM_DI
13.4 BM_DO
13.5 DI
13.6 DO
13.7 PS
13.8 Valve
14.2 AO
14.3 DI
14.4 DO
14.5 F_DI
14.6 F_DI/DO
14.7 IM
14.8 PS
Approved combinations
See SIMATIC Net; S7-CPs for Industrial Ethernet; Manual, Part BL1 for the approved
combinations of Interface Modules, couplers and Bus Modules as well as for the available
functions.
15.3 Y switch
1)
Module supports Configuration in Run (CiR) from FW V4.0
15.4 PA Link
Approved combinations
See SIMATIC Bus links DP/PA coupler, active field distributor, PA Link and Y Link documentation
for the approved combinations of interface modules, couplers and bus modules and for the
available functions.
15.5 FF Link
Approved combinations
See SIMATIC Bus links FF Link bus link documentation for the approved combinations of
interface modules, couplers and bus modules and for the available functions.
Approved combinations
You can find additional information in the SIMATIC Bus links; Compact FF Link bus link
documentation.
15.7 Y Link
Approved combinations
See SIMATIC Bus links DP/PA coupler, active field distributor, PA Link and Y Link documentation
for the approved combinations of interface modules, couplers and bus modules and for the
available functions.
Approved combinations
See SIMATIC
Bus links DP/PA coupler, active field distributor, PA Link and Y-Link documentation for the
approved combinations of interface modules, couplers and bus modules and for the available
functions.
Approved combinations
See the SIMATIC
Bus Links DP/PA Coupler, Active Field Distributors, PA Link and Y-Link manual for the approved
combinations of interface modules, couplers and bus modules and for the available functions.
Approved combinations
See SIMATIC
Bus links DP/PA coupler, active field distributor, PA Link and Y-Link documentation for the
approved combinations of interface modules, couplers and bus modules and for the available
functions.
15.11 Accessories
Approved combinations
See the corresponding manuals for the approved combinations of interface modules and bus
modules and for the available functions.
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
Product cancellation: 09/2002
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
Product cancellation: 10/2018
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
Has been released for PROFINET as of firmware V4.0.
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
Has been released for PROFINET as of firmware V1.2.
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
Recommended for use in PROFINET.
The device variants that can be used in each case can be found in the current PCS 7 hardware
catalog in HW Config.
More information is provided in the FAQ under the entry ID 109800740 in Industry Online
Support:
• Internet link (https://support.industry.siemens.com/cs/de/en/view/109800740)
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
Recommended for use in PROFINET.
The device variants that can be used in each case can be found in the current PCS 7 hardware
catalog in HW Config.
More information is provided in the FAQ under the entry ID 109800740 in Industry Online
Support:
• Internet link (https://support.industry.siemens.com/cs/de/en/view/109800740)
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
Recommended for use in PROFINET.
The device variants that can be used in each case can be found in the current PCS 7 hardware
catalog in HW Config.
More information is provided in the FAQ under the entry ID 109800740 in Industry Online
Support:
• Internet link (https://support.industry.siemens.com/cs/de/en/view/109800740)
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
Has been released for PROFINET as of firmware V3.0.
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
Has been released for PROFINET as of firmware V3.0.
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
Has been released for PROFINET as of firmware V3.0.
Note
Product cancellation: 10/2015
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
Product cancellation: 10/2016
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
Has been released for PROFINET as of firmware V4.0.
The device variants that can be used in each case can be found in the current PCS 7 hardware
catalog in HW Config.
More information is provided in the FAQ under the entry ID 109800740 in Industry Online
Support:
• Internet link (https://support.industry.siemens.com/cs/de/en/view/109800740)
Note
All product types, modules, and accessories of SIMATIC NET released for this product family can
also be used for PCS 7.
Note
All product types, modules, and accessories released for this product family can also be used for
PCS 7.
Note
All product types, modules, and accessories released for this product family can also be used for
PCS 7.
Note
You can find additional information on pneumatic valves, ordering and support on the Internet
at www.burkert.com
Table 20-1 Buerkert AirLINE Ex Type 8650 pneumatic valve terminal for SIMATIC ET 200iSP
Table 20-2 Buerkert AirLINE SP Ex Type 8647 pneumatic valve terminal for SIMATIC ET 200SP and ET 200SP HA
20.2 Buerk
Note
For additional information on "Time synchronization in SIMATIC PCS 7 with time server from
Bürk Mobatime enterprise" please refer to entry ID 109760344 in the Industry Online Support.
20.3 SICLOCK
20.4 SITOP
Note
PCS 7 supports SITOP products.
You will find additional information on the PCS 7 Add-on catalog.
20.5 SIMOCODE
Note
PCS 7 supports SIMOCODE products.
You will find additional information on the PCS 7 Add-on catalog.
20.6 SIMODRIVE
Note
PCS 7 supports SIMODRIVE products.
You will find additional information on the PCS 7 Add-on catalog.
20.7 SINAMICS
Note
PCS 7 supports SINAMICS products.
You will find additional information on the PCS 7 Add-on catalog.
20.8 SIWAREX
Note
PCS 7 supports SIWAREX products.
You will find additional information in the PCS 7 Add-on catalog.
20.9 AS-i
Note
PCS 7 supports AS-i products.
You will find additional information in the PCS 7 Add-on catalog.
21.2 FM
21.3 PS
21.4 SM DI
21.5 SM DO
21.6 SM DI/DO
21.7 SM DI-F
21.8 SM DO-F
21.9 SM AI
21.10 SM AO
21.11 SM AI-F
21.12 SM MTA
Note
The extended driver design (PCS 7 V5.2) can be used with FW V3.0 and higher.
Note
The extended driver design (PCS 7 V5.2) can be used with FW V3.0 and higher.
Note
CPUs of this generation are only supported by driver designs up to PCS 7 V4.02.
Upgrading to driver designs of PCS 7 V5.0 or later is not possible.
22.14 CP Ethernet
22.15 CP PROFIBUS
22.16 IM
22.17 PS
22.18 Racks
22.19 SM DI
22.20 SM DO
22.21 SM AI
22.22 SM AO
Engineering note
You will not find any SIPLUS modules in the PCS 7 hardware catalog.
• Configure the modules available in the hardware catalog.
• Install the compatible SIPLUS versions of the modules available in the hardware catalog.