Scribd Logo
Upload

Welcome to Scribd!

  • 7 views

    LM4 Connector

    Uploaded by

    arsya_agas
    The LM4 is a 100% woven polyester flexible connector used for venting air through walls in higher temperature environments up to 130°C/266°F. It has good flexibility and low temperature performance. The LM4 meets various compliance standards and regulations and is available in diameters from 100mm to 1650mm and lengths from 80mm to 1500mm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    LM4 Connector

    Uploaded by

    arsya_agas
    7 views1 page
    The LM4 is a 100% woven polyester flexible connector used for venting air through walls in higher temperature environments up to 130°C/266°F. It has good flexibility and low temperature performance. The LM4 meets various compliance standards and regulations and is available in diameters from 100mm to 1650mm and lengths from 80mm to 1500mm.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The LM4 is a 100% woven polyester flexible connector used for venting air through walls in higher temperature environments up to 130°C/266°F. It has good flexibility and low temperature performance. The LM4 meets various compliance standards and regulations and is available in diameters from 100mm to 1650mm and lengths from 80mm to 1500mm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    7 views1 page

    LM4 Connector

    Uploaded by

    arsya_agas
    The LM4 is a 100% woven polyester flexible connector used for venting air through walls in higher temperature environments up to 130°C/266°F. It has good flexibility and low temperature performance. The LM4 meets various compliance standards and regulations and is available in diameters from 100mm to 1650mm and lengths from 80mm to 1500mm.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    | PRODUCT SPEC SHEET

    LM4
    • LM4 is 100% woven Polyester. PHYSICAL PROPERTIES:
    Fibre 100% Polyester
    • BFM® LM4 connectors are predominantly used in
    Colour White
    applications where air needs to be vented through the
    Multi-filament plain
    walls of the flexible connector Construction/Finish
    weave, calendered
    Weight 393 g/m2 / 11.6 oz/yd2
    • Used for higher temperature environments (up to
    -40 to 130˚C
    130˚C/266˚F) Operating Temp Range
    -40 to 266˚F

    Max. Surge Temp 150˚C / 302˚F


    Low Temp/Flexibility Good
    Surface Resistivity (Ohms)
    109
    (Test Standard ASTM D-257)

    Minimum Tensile Strength


    Fabric kgf/25mm
    measured as a force over a
    Warp 293)
    25mm wide Ravel Strip
    Weft 230)
    (Test Standard: ASTM 5034)

    Air Permeability
    (cm3/cm2/sec@125Pa) 0.4
           (ft3/ft2/[email protected]” wg) 0.8
    100% (cm3/cm2/sec@200Pa) 0.5
    VIBRATION OSCILLATION COMPRESSION DUST TIGHT FOOD SAFETY ATEX (ft3/ft2/[email protected]” wg) 1.1

    AVAILABLE SIZES: (In 50mm (2”) increments)

    Diameter Ø100mm - 1,650mm


    (also available in 125mm/5”) (Ø4” - 65“)

    80mm, 100mm - 1,500mm


    Length
    (3”, 4” to 591/16”)
    (Size range is in mm, so inch conversions are approximate only. Restrictions
    apply for larger diameters, or when anti-collapse rings or TR versions used.
    Refer to ‘Connector Sizes’ for more information)

    COMPLIANCE:

    Atex Compliant: IBExU tested. Can be used in all


    dust & gas explosion hazardous areas (restrictions
    apply).
    Complies with the following regulations:
    FDA 21 CFR 177.2800, (EC) 1935/2004, 2023/2006
    & 10/2011. The BFM® cuff and spigot system is a 3A
    certified 63-04 sanitary fitting.

    BFM® GLOBAL LTD. | E: [email protected] | WEB: BFMfitting.com PRODUCT SPEC SHEET- LM4
    V15 JUNE 2023 PAGE 1 OF 1

    You might also like