Scribd
Upload
47 views

Modulation & Its Need

Modulation is needed to transmit baseband signals over long distances. It involves mixing a lower frequency message signal with a higher frequency carrier signal. This produces a modulated signal that can carry the message information while traveling farther due to the higher frequency of the carrier signal. Modulation allows reducing the height of transmission antennas, avoiding mixing of multiple signals, increasing the communication range, enabling multiplexing of signals on the same channel, adjusting the signal bandwidth, and improving the quality of reception. The document provides examples and explanations of how and why modulation is used in communication systems.

Uploaded by

Anulal SS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views

Modulation & Its Need

Modulation is needed to transmit baseband signals over long distances. It involves mixing a lower frequency message signal with a higher frequency carrier signal. This produces a modulated signal that can carry the message information while traveling farther due to the higher frequency of the carrier signal. Modulation allows reducing the height of transmission antennas, avoiding mixing of multiple signals, increasing the communication range, enabling multiplexing of signals on the same channel, adjusting the signal bandwidth, and improving the quality of reception. The document provides examples and explanations of how and why modulation is used in communication systems.

Uploaded by

Anulal SS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

MODULATION & ITS

NEED
Prof. Kamlesh T. Kahar
Communication

 Transfer of Information from one place to another


 Should be efficient, reliable & secure
 Communication System: components or subsystems act together to accomplish transfer of
Information from one place to another
Block diagram of basic communication system

Modulation Demodulation

The baseband signals are incompatible for direct transmission. For such a signal, to travel longer distances,
its strength has to be increased by modulating with a high frequency carrier wave, which doesn’t affect the
parameters of the modulating signal.
What is Modulation?

 Modulation is a process of mixing low energy message signal with high energy carrier signal to
produce a new high energy signal which carries information to a long distance.
 Definition: Modulation is the process of changing some parameters of the carrier signal (such
as amplitude, frequency or phase) in accordance with the instantaneous values of the
modulating signal (message signal).

Signals in the Modulation Process


Message or
Modulating Carrier Modulated
Signal (baseband Signal Signal
Signal)
Example of Modulation
Need for Modulation

 Reduce the height of Antenna.


 Avoid mixing of signals.
 Increases range of Communication.
 Multiplexing of signals.
 Adjustment in bandwidth.
 Improve quality of Reception.
Reduction in the height of antenna
 For the transmission of radio signals, the antenna height must be multiple of λ/4 , where λ is
the wavelength.
We can write λ = c /f where c : velocity of light
f: frequency of the signal to be transmitted

The minimum antenna height required to transmit a baseband signal of f = 10 kHz is :

The antenna of this height is practically impossible to install.


Now, let us consider a modulated using carrier of f = 1 MHz . The minimum antenna height is:

This antenna can be easily installed practically . Thus, modulation reduces the height of the
antenna .
Avoids mixing of signals
 If the baseband sound signals are transmitted without using the modulation by more than one
transmitter, then all the signals will be in the same frequency range i.e. 0 to 20 kHz . Therefore, all
the signals get mixed together and a receiver can not separate them from each other .
 If each baseband sound signal is used to modulate a different carrier then they will occupy different
slots in the frequency domain (different channels). Thus, modulation avoids mixing of signals .
Increase the Range of Communication

 The frequency of baseband signal is low, and the low frequency signals can not travel long
distance when they are transmitted . They get heavily attenuated .
 The attenuation reduces with increase in frequency of the transmitted signal, and they travel
longer distance .
 The modulation process increases the frequency of the signal to be transmitted . Therefore, it
increases the range of communication.
Multiplexing of signals

 Multiplexing is a process in which two or more signals can


be transmitted over the same communication channel
simultaneously .
 This is possible only with modulation.
 The multiplexing allows the same channel to be used by
many signals . Hence, many TV channels can use the same
frequency range, without getting mixed with each other or
different frequency signals can be transmitted at the same
time .
Adjustment in bandwidth.

 Bandwidth of modulated signal may be made smaller or larger than the original signal.
 Signal to noise ratio, which is the function of signal bandwidth can be improved by proper
control of bandwidth.
Improves Quality of Reception

 With frequency modulation (FM) and the digital communication techniques such as PCM, the
effect of noise is reduced to a great extent . This improves quality of reception .
Types of Modulation

You might also like