LRHC Full en Us A4

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

MODEL Normally closed, modulating element

LRHC SERIES 3 / CAPACITY: 60 gpm / CAVITY: T-17A

sunhydraulics.com/model/LRHC

Normally closed modulating elements without an internal orifice act as a bypass compensator to maintain a
constant pressure drop across an orifice, regardless of variations in upstream or downstream pressure.

TECHNICAL DATA NOTE: DATA MAY VARY BY CONFIGURATION. SEE CONFIGURATION SECTION.

Cavity T-17A
Series 3
Capacity 60 gpm
Maximum Operating Pressure 5000 psi
Valve Hex Size 1 1/4 in.
Valve Installation Torque 150 - 160 lbf ft
Seal kit - Cartridge Buna: 990017007
Seal kit - Cartridge Polyurethane: 990017002
Seal kit - Cartridge Viton: 990017006
Model Weight 1.11 lb.

CONFIGURATION OPTIONS Model Code Example: LRHCXHN


CONTROL (X) DIFFERENTIAL PRESSURE (H) SEAL MATERIAL (N) MATERIAL/COATING
X Not Adjustable H 200 psi (14 bar) N Buna-N Standard Material/Coating
L Tuning Adjustment D 50 psi (3,5 bar) V Viton /AP Stainless Steel, Passivated
F 100 psi (7 bar)
G 150 psi (10,5 bar)

TECHNICAL FEATURES
A tuning adjustment (models configured with an L control) is available to vary the pressure drop across the compensator to increase/decrease flow within +/-25% of
setting.
All ports will accept 5000 psi (350 bar).
Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel
components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of
Construction page located under TECH RESOURCES.
Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge
machining variations.

c 2019 Sun Hydraulics 1 of 1

You might also like